Re: Nokia N900 - audio TPA6130A2 problems

From: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
To: "Grygorii Strashko" <grygorii.strashko@ti.com>,
	"Sebastian Reichel" <sre@kernel.org>,
	"Pali Rohár" <pali.rohar@gmail.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>,
	Jarkko Nikula <jarkko.nikula@bitmer.com>,
	Tony Lindgren <tony@atomide.com>,
	Lars-Peter Clausen <lars@metafoo.de>,
	linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
	Pavel Machek <pavel@ucw.cz>, Aaro Koskinen <aaro.koskinen@iki.fi>,
	Nishanth Menon <nm@ti.com>,
	merlijn@wizzup.org
Subject: Re: Nokia N900 - audio TPA6130A2 problems
Date: Wed, 16 Mar 2016 21:50:40 +0200	[thread overview]
Message-ID: <56E9B910.7000904@gmail.com> (raw)
In-Reply-To: <56E9A6D9.7000003@ti.com>

Hi,

On 16.03.2016 20:32, Grygorii Strashko wrote:
>
> No-no :) take a look on i2c-omap.c
>
> 	r = i2c_add_numbered_adapter(adap);
>
> ^^^^ here you see messages from tpa6130a2 (create i2c devices & probe if drivers are ready)
>
> 	if (r) {
> 		dev_err(omap->dev, "failure adding adapter\n");
> 		goto err_unuse_clocks;
> 	}
>
> 	dev_info(omap->dev, "bus %d rev%d.%d at %d kHz\n", adap->nr,
> 		 major, minor, omap->speed);
>
> ^^^^ and here "omap_i2c 48072000.i2c:  bus 2 rev3.3 at 100 kHz"
>
> so everything is ok with probe order
>

Sorry for the noise then :)

here is the log with dump_stack() in tpa6130a2_i2c_write:

Jan  1 06:01:43 Nokia-N900 kernel: [    6.947998] omap_i2c 48070000.i2c: bus 1 rev3.3 at 2200 kHz
Jan  1 06:01:43 Nokia-N900 kernel: [    6.960632] tpa6130a2 2-0060: Write failed
Jan  1 06:01:43 Nokia-N900 kernel: [    6.965026] CPU: 0 PID: 6 Comm: kworker/u2:0 Not tainted 4.5.0-rc5+ #26
Jan  1 06:01:43 Nokia-N900 kernel: [    6.972106] Hardware name: Nokia RX-51 board
Jan  1 06:01:43 Nokia-N900 kernel: [    6.976684] Workqueue: deferwq deferred_probe_work_func
Jan  1 06:01:43 Nokia-N900 kernel: [    6.982299] [<c0013c18>] (unwind_backtrace) from [<c0011f38>] (show_stack+0x10/0x14)
Jan  1 06:01:43 Nokia-N900 kernel: [    6.990570] [<c0011f38>] (show_stack) from [<c0390884>] (tpa6130a2_i2c_write+0x58/0x90)
Jan  1 06:01:43 Nokia-N900 kernel: [    6.999114] [<c0390884>] (tpa6130a2_i2c_write) from [<c0390968>] (tpa6130a2_power+0xac/0x1c4)
Jan  1 06:01:43 Nokia-N900 kernel: [    7.008239] [<c0390968>] (tpa6130a2_power) from [<c0390d80>] (tpa6130a2_probe+0x144/0x234)
Jan  1 06:01:43 Nokia-N900 kernel: [    7.017059] [<c0390d80>] (tpa6130a2_probe) from [<c032b650>] (i2c_device_probe+0x170/0x1b8)
Jan  1 06:01:43 Nokia-N900 kernel: [    7.025939] [<c032b650>] (i2c_device_probe) from [<c02a7bd4>] (driver_probe_device+0x120/0x2b0)
Jan  1 06:01:43 Nokia-N900 kernel: [    7.035247] [<c02a7bd4>] (driver_probe_device) from [<c02a62c8>] (bus_for_each_drv+0x48/0x8c)
Jan  1 06:01:43 Nokia-N900 kernel: [    7.044311] [<c02a62c8>] (bus_for_each_drv) from [<c02a7a20>] (__device_attach+0x88/0xf8)
Jan  1 06:01:43 Nokia-N900 kernel: [    7.053009] [<c02a7a20>] (__device_attach) from [<c02a70b0>] (bus_probe_device+0x28/0x80)
Jan  1 06:01:43 Nokia-N900 kernel: [    7.061737] [<c02a70b0>] (bus_probe_device) from [<c02a5680>] (device_add+0x3c0/0x55c)
Jan  1 06:01:43 Nokia-N900 kernel: [    7.070159] [<c02a5680>] (device_add) from [<c032cf28>] (i2c_new_device+0xf8/0x198)
Jan  1 06:01:43 Nokia-N900 kernel: [    7.078308] [<c032cf28>] (i2c_new_device) from [<c032d4e8>] (i2c_register_adapter+0x2d0/0x47c)
Jan  1 06:01:43 Nokia-N900 kernel: [    7.087432] [<c032d4e8>] (i2c_register_adapter) from [<c032f084>] (omap_i2c_probe+0x54c/0x64c)
Jan  1 06:01:43 Nokia-N900 kernel: [    7.096618] [<c032f084>] (omap_i2c_probe) from [<c02a93bc>] (platform_drv_probe+0x58/0xa0)
Jan  1 06:01:43 Nokia-N900 kernel: [    7.105438] [<c02a93bc>] (platform_drv_probe) from [<c02a7bd4>] (driver_probe_device+0x120/0x2b0)
Jan  1 06:01:43 Nokia-N900 kernel: [    7.114929] [<c02a7bd4>] (driver_probe_device) from [<c02a62c8>] (bus_for_each_drv+0x48/0x8c)
Jan  1 06:01:43 Nokia-N900 kernel: [    7.123962] [<c02a62c8>] (bus_for_each_drv) from [<c02a7a20>] (__device_attach+0x88/0xf8)
Jan  1 06:01:43 Nokia-N900 kernel: [    7.132659] [<c02a7a20>] (__device_attach) from [<c02a70b0>] (bus_probe_device+0x28/0x80)
Jan  1 06:01:43 Nokia-N900 kernel: [    7.141357] [<c02a70b0>] (bus_probe_device) from [<c02a7508>] (deferred_probe_work_func+0x58/0x84)
Jan  1 06:01:43 Nokia-N900 kernel: [    7.150939] [<c02a7508>] (deferred_probe_work_func) from [<c0042a50>] (process_one_work+0x1c4/0x324)
Jan  1 06:01:43 Nokia-N900 kernel: [    7.160705] [<c0042a50>] (process_one_work) from [<c0042ef4>] (worker_thread+0x314/0x4a8)
Jan  1 06:01:43 Nokia-N900 kernel: [    7.169433] [<c0042ef4>] (worker_thread) from [<c00474e4>] (kthread+0xcc/0xe0)
Jan  1 06:01:43 Nokia-N900 kernel: [    7.177154] [<c00474e4>] (kthread) from [<c000f218>] (ret_from_fork+0x14/0x3c)
Jan  1 06:01:43 Nokia-N900 kernel: [    7.184783] tpa6130a2 2-0060: Failed to initialize chip
Jan  1 06:01:43 Nokia-N900 kernel: [    7.190551] tpa6130a2: probe of 2-0060 failed with error -121
Jan  1 06:01:43 Nokia-N900 kernel: [    7.197174] omap_i2c 48072000.i2c: bus 2 rev3.3 at 100 kHz

now, the only thing I can think of remaining to test is the reset gpio set-up -
I wonder if it is possible to be set in safe mode(or input, or... ?), so the
reset is never deasserted.

Ivo