From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marek Vasut Date: Thu, 31 Mar 2016 17:24:47 +0200 Subject: [U-Boot] [PATCH 00/10] driver model bring-up of dwc3 usb peripheral In-Reply-To: <20160331151157.GF23166@bill-the-cat> References: <1458044059-18363-1-git-send-email-mugunthanvnm@ti.com> <56FD2FE9.8090706@monstr.eu> <20160331151157.GF23166@bill-the-cat> Message-ID: <56FD413F.4060801@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 03/31/2016 05:11 PM, Tom Rini wrote: > On Thu, Mar 31, 2016 at 04:10:49PM +0200, Michal Simek wrote: >> Hi Tom, >> >> On 15.3.2016 13:14, Mugunthan V N wrote: >>> This patch series enables dwc3 usb driver to adopt driver model. >>> This has been tested on AM437x evm sk (logs [1]) by loading >>> kernel through usb ether >>> >>> Also pushed a branch for testing [2] >>> >>> [1] - http://pastebin.ubuntu.com/15391169/ >>> [2] - git://git.ti.com/~mugunthanvnm/ti-u-boot/mugunth-ti-u-boot.git dm-dwc3 >>> >>> Kishon Vijay Abraham I (1): >>> configs: am43xx: Add am43xx_evm_usbspl_defconfig >>> >>> Mugunthan V N (8): >>> drivers: usb: dwc3: remove devm_zalloc from linux_compact >>> drivers: usb: dwc3-omap: move usb_gadget_handle_interrupts from board >>> files to drivers >>> am437x: board: do not register usb devices when CONFIG_DM_USB is >>> defined >>> dra7xx: board: do not register usb devices when CONFIG_DM_USB is >>> defined >>> drivers: usb: dwc3: add ti dwc3 misc driver for wrapper >>> drivers: usb: common: add support to get maximum speed from dt >>> drivers: usb: dwc3: add ti dwc3 peripheral driver with driver model >>> support >>> defconfig: am437x_sk_evm: enable usb driver model >>> >>> Tom Rini (1): >>> am43xx: Add USB device boot support to SPL >>> >>> board/ti/am43xx/MAINTAINERS | 1 + >>> board/ti/am43xx/board.c | 52 +++++--- >>> board/ti/am57xx/board.c | 11 -- >>> board/ti/dra7xx/evm.c | 13 +- >>> configs/am437x_sk_evm_defconfig | 4 + >>> configs/am43xx_evm_usbspl_defconfig | 9 ++ >>> drivers/Makefile | 2 + >>> drivers/usb/common/common.c | 29 +++++ >>> drivers/usb/dwc3/core.c | 64 +++++++++- >>> drivers/usb/dwc3/core.h | 6 + >>> drivers/usb/dwc3/dwc3-omap.c | 230 +++++++++++++++++++++++++++++++++++- >>> drivers/usb/dwc3/gadget.c | 2 +- >>> drivers/usb/dwc3/linux-compat.h | 5 - >>> drivers/usb/dwc3/ti_usb_phy.c | 1 + >>> drivers/usb/gadget/gadget_chips.h | 2 + >>> include/configs/am43xx_evm.h | 13 ++ >>> include/linux/usb/otg.h | 9 ++ >>> 17 files changed, 406 insertions(+), 47 deletions(-) >>> create mode 100644 configs/am43xx_evm_usbspl_defconfig >>> >> >> Are you going to take this directly or this should go via USB tree? > > Marek, do you want this? Or want me to? > That is Lukasz. -- Best regards, Marek Vasut