From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752633AbcDCIxW (ORCPT ); Sun, 3 Apr 2016 04:53:22 -0400 Received: from saturn.retrosnub.co.uk ([178.18.118.26]:48618 "EHLO saturn.retrosnub.co.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751865AbcDCIxT (ORCPT ); Sun, 3 Apr 2016 04:53:19 -0400 Subject: Re: [PATCH] iio: imu: Add initial support for Bosch BMI160 To: Daniel Baluta References: <1459513870-3852-1-git-send-email-daniel.baluta@intel.com> Cc: knaack.h@gmx.de, lars@metafoo.de, pmeerw@pmeerw.net, linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org From: Jonathan Cameron Message-ID: <5700D9FA.4020600@kernel.org> Date: Sun, 3 Apr 2016 09:53:14 +0100 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:38.0) Gecko/20100101 Thunderbird/38.7.1 MIME-Version: 1.0 In-Reply-To: <1459513870-3852-1-git-send-email-daniel.baluta@intel.com> Content-Type: text/plain; charset=windows-1252 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On 01/04/16 13:31, Daniel Baluta wrote: > BMI160 is an Inertial Measurement Unit (IMU) which provides acceleration > and angular rate measurement. It also offers a secondary I2C interface > for connecting a magnetometer sensor (usually BMM160). > > Current driver offers support for accelerometer and gyroscope readings > via sysfs or via buffer interface using an external trigger (e.g. > hrtimer). Data is retrieved from IMU via I2C or SPI interface. > > Datasheet is at: > http://www.mouser.com/ds/2/783/BST-BMI160-DS000-07-786474.pdf > > Signed-off-by: Daniel Baluta A few bits inline. Mostly around the trigger handler... J > --- > drivers/iio/imu/Kconfig | 2 + > drivers/iio/imu/Makefile | 1 + > drivers/iio/imu/bmi160/Kconfig | 32 ++ > drivers/iio/imu/bmi160/Makefile | 6 + > drivers/iio/imu/bmi160/bmi160.h | 8 + > drivers/iio/imu/bmi160/bmi160_core.c | 588 +++++++++++++++++++++++++++++++++++ > drivers/iio/imu/bmi160/bmi160_i2c.c | 79 +++++ > drivers/iio/imu/bmi160/bmi160_spi.c | 71 +++++ > 8 files changed, 787 insertions(+) > create mode 100644 drivers/iio/imu/bmi160/Kconfig > create mode 100644 drivers/iio/imu/bmi160/Makefile > create mode 100644 drivers/iio/imu/bmi160/bmi160.h > create mode 100644 drivers/iio/imu/bmi160/bmi160_core.c > create mode 100644 drivers/iio/imu/bmi160/bmi160_i2c.c > create mode 100644 drivers/iio/imu/bmi160/bmi160_spi.c > > diff --git a/drivers/iio/imu/Kconfig b/drivers/iio/imu/Kconfig > index 5e610f7..1f1ad41 100644 > --- a/drivers/iio/imu/Kconfig > +++ b/drivers/iio/imu/Kconfig > @@ -25,6 +25,8 @@ config ADIS16480 > Say yes here to build support for Analog Devices ADIS16375, ADIS16480, > ADIS16485, ADIS16488 inertial sensors. > > +source "drivers/iio/imu/bmi160/Kconfig" > + > config KMX61 > tristate "Kionix KMX61 6-axis accelerometer and magnetometer" > depends on I2C > diff --git a/drivers/iio/imu/Makefile b/drivers/iio/imu/Makefile > index e1e6e3d..c71bcd3 100644 > --- a/drivers/iio/imu/Makefile > +++ b/drivers/iio/imu/Makefile > @@ -13,6 +13,7 @@ adis_lib-$(CONFIG_IIO_ADIS_LIB_BUFFER) += adis_trigger.o > adis_lib-$(CONFIG_IIO_ADIS_LIB_BUFFER) += adis_buffer.o > obj-$(CONFIG_IIO_ADIS_LIB) += adis_lib.o > > +obj-y += bmi160/ > obj-y += inv_mpu6050/ > > obj-$(CONFIG_KMX61) += kmx61.o > diff --git a/drivers/iio/imu/bmi160/Kconfig b/drivers/iio/imu/bmi160/Kconfig > new file mode 100644 > index 0000000..adb512f > --- /dev/null > +++ b/drivers/iio/imu/bmi160/Kconfig > @@ -0,0 +1,32 @@ > +# > +# BMI160 IMU driver > +# > + > +config BMI160 > + tristate > + select IIO_BUFFER > + select IIO_TRIGGERED_BUFFER > + > +config BMI160_I2C > + tristate "Bosch BMI160 I2C driver" > + depends on I2C > + select BMI160 > + select REGMAP_I2C > + help > + If you say yes you get support BMI160 IMU on I2C with accelerometer, > + gyroscope and external BMG160 magnetometer. > + > + This driver can also be built as a module. If so, the module will be > + called bmi160_i2c. > + > +config BMI160_SPI > + tristate "Bosch BMI160 SPI driver" > + depends on SPI > + select BMI160 > + select REGMAP_SPI > + help > + If you say yes you get support BMI160 IMU on SPI with accelerometer, > + gyroscope and external BMG160 magnetometer. > + > + This driver can also be built as a module. If so, the module will be > + called bmi160_i2c. > diff --git a/drivers/iio/imu/bmi160/Makefile b/drivers/iio/imu/bmi160/Makefile > new file mode 100644 > index 0000000..10365e4 > --- /dev/null > +++ b/drivers/iio/imu/bmi160/Makefile > @@ -0,0 +1,6 @@ > +# > +# Makefile for Bosch BMI160 IMU > +# > +obj-$(CONFIG_BMI160) += bmi160_core.o > +obj-$(CONFIG_BMI160_I2C) += bmi160_i2c.o > +obj-$(CONFIG_BMI160_SPI) += bmi160_spi.o > diff --git a/drivers/iio/imu/bmi160/bmi160.h b/drivers/iio/imu/bmi160/bmi160.h > new file mode 100644 > index 0000000..c5f7b2d > --- /dev/null > +++ b/drivers/iio/imu/bmi160/bmi160.h > @@ -0,0 +1,8 @@ > +#ifndef BMI160_H_ > +#define BMI160_H_ > + > +int bmi160_core_probe(struct device *dev, struct regmap *regmap, > + const char *name, bool use_spi); > +void bmi160_core_remove(struct device *dev); > + > +#endif /* BMI160_H_ */ > diff --git a/drivers/iio/imu/bmi160/bmi160_core.c b/drivers/iio/imu/bmi160/bmi160_core.c > new file mode 100644 > index 0000000..d6ce643 > --- /dev/null > +++ b/drivers/iio/imu/bmi160/bmi160_core.c > @@ -0,0 +1,588 @@ > +/* > + * BMI160 - Bosch IMU (accel, gyro plus external magnetometer) > + * > + * Copyright (c) 2016, Intel Corporation. > + * > + * This file is subject to the terms and conditions of version 2 of > + * the GNU General Public License. See the file COPYING in the main > + * directory of this archive for more details. > + * > + * IIO core driver for BMI160, with support for I2C/SPI busses > + * > + * TODO: magnetometer, interrupts, hardware FIFO > + */ > +#include > +#include > +#include > +#include > + > +#include > +#include > +#include > +#include > + > +#include "bmi160.h" > + > +#define BMI160_REG_CHIP_ID 0x00 > +#define BMI160_CHIP_ID_VAL 0xD1 > + > +#define BMI160_REG_PMU_STATUS 0x03 > + > +/* X axis data low byte address, the rest can be obtained using axis offset */ > +#define BMI160_REG_DATA_MAGN_XOUT_L 0x04 > +#define BMI160_REG_DATA_GYRO_XOUT_L 0x0C > +#define BMI160_REG_DATA_ACCEL_XOUT_L 0x12 > + > +#define BMI160_REG_ACCEL_CONFIG 0x40 > +#define BMI160_ACCEL_CONFIG_ODR_MASK GENMASK(3, 0) > +#define BMI160_ACCEL_CONFIG_BWP_MASK GENMASK(6, 4) > + > +#define BMI160_REG_ACCEL_RANGE 0x41 > +#define BMI160_ACCEL_RANGE_2G 0x03 > +#define BMI160_ACCEL_RANGE_4G 0x05 > +#define BMI160_ACCEL_RANGE_8G 0x08 > +#define BMI160_ACCEL_RANGE_16G 0x0C > + > +#define BMI160_REG_GYRO_CONFIG 0x42 > +#define BMI160_GYRO_CONFIG_ODR_MASK GENMASK(3, 0) > +#define BMI160_GYRO_CONFIG_BWP_MASK GENMASK(5, 4) > + > +#define BMI160_REG_GYRO_RANGE 0x43 > +#define BMI160_GYRO_RANGE_2000DPS 0x00 > +#define BMI160_GYRO_RANGE_1000DPS 0x01 > +#define BMI160_GYRO_RANGE_500DPS 0x02 > +#define BMI160_GYRO_RANGE_250DPS 0x03 > +#define BMI160_GYRO_RANGE_125DPS 0x04 > + > +#define BMI160_REG_CMD 0x7E > +#define BMI160_CMD_ACCEL_PM_SUSPEND 0x10 > +#define BMI160_CMD_ACCEL_PM_NORMAL 0x11 > +#define BMI160_CMD_ACCEL_PM_LOW_POWER 0x12 > +#define BMI160_CMD_GYRO_PM_SUSPEND 0x14 > +#define BMI160_CMD_GYRO_PM_NORMAL 0x15 > +#define BMI160_CMD_GYRO_PM_FAST_STARTUP 0x17 > +#define BMI160_CMD_SOFTRESET 0xB6 > + > +#define BMI160_REG_DUMMY 0x7F > + > +#define BMI160_ACCEL_PMU_MIN_SLEEP 3200 /* usec */ > +#define BMI160_ACCEL_PMU_MAX_SLEEP 3800 > +#define BMI160_GYRO_PMU_MIN_SLEEP 55000 > +#define BMI160_GYRO_PMU_MAX_SLEEP 80000 > +#define BMI160_SOFTRESET_SLEEP 1000 > + > +#define BMI160_CHANNEL(_type, _axis, _index) { \ > + .type = _type, \ > + .modified = 1, \ > + .channel2 = IIO_MOD_##_axis, \ > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ > + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ > + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ > + .scan_index = _index, \ > + .scan_type = { \ > + .sign = 's', \ > + .realbits = 16, \ > + .storagebits = 16, \ > + .shift = 0, \ > + .endianness = IIO_LE, \ > + }, \ > +} > + > +/* scan indexes follow DATA register order */ > +enum bmi160_scan_axis { > + BMI160_SCAN_EXT_MAGN_X = 0, > + BMI160_SCAN_EXT_MAGN_Y, > + BMI160_SCAN_EXT_MAGN_Z, > + BMI160_SCAN_RHALL, Given the ordering in here is arbitary, why include the unsupported elements at this stage? Don't suppose it does any harm though. > + BMI160_SCAN_GYRO_X, > + BMI160_SCAN_GYRO_Y, > + BMI160_SCAN_GYRO_Z, > + BMI160_SCAN_ACCEL_X, > + BMI160_SCAN_ACCEL_Y, > + BMI160_SCAN_ACCEL_Z, > + BMI160_SCAN_TIMESTAMP, > +}; > + > +enum bmi160_sensor_type { > + BMI160_ACCEL = 0, > + BMI160_GYRO, > + BMI160_EXT_MAGN, > + BMI160_NUM_SENSORS /* must be last */ > +}; > + > +struct bmi160_data { > + struct regmap *regmap; > +}; > + > +struct bmi160_regs { > + u8 data; /* LSB byte register for X-axis */ > + u8 config; > + u8 config_odr_mask; > + u8 config_bwp_mask; > + u8 range; > + u8 pmu_cmd_normal; > + u8 pmu_cmd_suspend; > +}; > + > +struct bmi160_regs bmi160_regs[] = { > + [BMI160_ACCEL] = { > + .data = BMI160_REG_DATA_ACCEL_XOUT_L, > + .config = BMI160_REG_ACCEL_CONFIG, > + .config_odr_mask = BMI160_ACCEL_CONFIG_ODR_MASK, > + .config_bwp_mask = BMI160_ACCEL_CONFIG_BWP_MASK, > + .range = BMI160_REG_ACCEL_RANGE, > + .pmu_cmd_normal = BMI160_CMD_ACCEL_PM_NORMAL, > + .pmu_cmd_suspend = BMI160_CMD_ACCEL_PM_SUSPEND, > + }, > + [BMI160_GYRO] = { > + .data = BMI160_REG_DATA_GYRO_XOUT_L, > + .config = BMI160_REG_GYRO_CONFIG, > + .config_odr_mask = BMI160_GYRO_CONFIG_ODR_MASK, > + .config_bwp_mask = BMI160_GYRO_CONFIG_BWP_MASK, > + .range = BMI160_REG_GYRO_RANGE, > + .pmu_cmd_normal = BMI160_CMD_GYRO_PM_NORMAL, > + .pmu_cmd_suspend = BMI160_CMD_GYRO_PM_SUSPEND, > + }, > +}; > + > +struct bmi160_pmu_time { > + unsigned long min; > + unsigned long max; > +}; > + > +struct bmi160_pmu_time bmi160_pmu_time[] = { > + [BMI160_ACCEL] = { > + .min = BMI160_ACCEL_PMU_MIN_SLEEP, > + .max = BMI160_ACCEL_PMU_MAX_SLEEP > + }, > + [BMI160_GYRO] = { > + .min = BMI160_GYRO_PMU_MIN_SLEEP, > + .max = BMI160_GYRO_PMU_MIN_SLEEP, > + }, > +}; > + > +struct bmi160_scale { > + u8 bits; > + int uscale; > +}; > + > +struct bmi160_odr { > + u8 bits; > + int odr; > + int uodr; > +}; > + > +static const struct bmi160_scale bmi160_accel_scale[] = { > + { BMI160_ACCEL_RANGE_2G, 598}, > + { BMI160_ACCEL_RANGE_4G, 1197}, > + { BMI160_ACCEL_RANGE_8G, 2394}, > + { BMI160_ACCEL_RANGE_16G, 4788}, > +}; > + > +static const struct bmi160_scale bmi160_gyro_scale[] = { > + { BMI160_GYRO_RANGE_2000DPS, 1065}, > + { BMI160_GYRO_RANGE_1000DPS, 532}, > + { BMI160_GYRO_RANGE_500DPS, 266}, > + { BMI160_GYRO_RANGE_250DPS, 133}, > + { BMI160_GYRO_RANGE_125DPS, 66}, > + > +}; > + > +struct bmi160_scale_item { > + const struct bmi160_scale *tbl; > + int num; > +}; > + > +static const struct bmi160_scale_item bmi160_scale_table[] = { > + [BMI160_ACCEL] = { > + .tbl = bmi160_accel_scale, > + .num = ARRAY_SIZE(bmi160_accel_scale), > + }, > + [BMI160_GYRO] = { > + .tbl = bmi160_gyro_scale, > + .num = ARRAY_SIZE(bmi160_gyro_scale), > + }, > +}; > + > +static const struct bmi160_odr bmi160_accel_odr[] = { > + {0x01, 0, 78125}, > + {0x02, 1, 5625}, > + {0x03, 3, 125}, > + {0x04, 6, 25}, > + {0x05, 12, 5}, > + {0x06, 25, 0}, > + {0x07, 50, 0}, > + {0x08, 100, 0}, > + {0x09, 200, 0}, > + {0x0A, 400, 0}, > + {0x0B, 800, 0}, > + {0x0C, 1600, 0}, > +}; > + > +static const struct bmi160_odr bmi160_gyro_odr[] = { > + {0x06, 25, 0}, > + {0x07, 50, 0}, > + {0x08, 100, 0}, > + {0x09, 200, 0}, > + {0x0A, 400, 0}, > + {0x0B, 8000, 0}, > + {0x0C, 1600, 0}, > + {0x0D, 3200, 0}, > +}; > + > +struct bmi160_odr_item { > + const struct bmi160_odr *tbl; > + int num; > +}; > + > +static const struct bmi160_odr_item bmi160_odr_table[] = { > + [BMI160_ACCEL] = { > + .tbl = bmi160_accel_odr, > + .num = ARRAY_SIZE(bmi160_accel_odr), > + }, > + [BMI160_GYRO] = { > + .tbl = bmi160_gyro_odr, > + .num = ARRAY_SIZE(bmi160_gyro_odr), > + }, > +}; > + > +static const struct iio_chan_spec bmi160_channels[] = { > + BMI160_CHANNEL(IIO_ACCEL, X, BMI160_SCAN_ACCEL_X), > + BMI160_CHANNEL(IIO_ACCEL, Y, BMI160_SCAN_ACCEL_Y), > + BMI160_CHANNEL(IIO_ACCEL, Z, BMI160_SCAN_ACCEL_Z), > + BMI160_CHANNEL(IIO_ANGL_VEL, X, BMI160_SCAN_GYRO_X), > + BMI160_CHANNEL(IIO_ANGL_VEL, Y, BMI160_SCAN_GYRO_Y), > + BMI160_CHANNEL(IIO_ANGL_VEL, Z, BMI160_SCAN_GYRO_Z), > + IIO_CHAN_SOFT_TIMESTAMP(BMI160_SCAN_TIMESTAMP), > +}; > + > +static enum bmi160_sensor_type bmi160_to_sensor(enum iio_chan_type iio_type) > +{ > + switch (iio_type) { > + case IIO_ACCEL: > + return BMI160_ACCEL; > + case IIO_ANGL_VEL: > + return BMI160_GYRO; > + default: > + return -EINVAL; > + } > +} > + > +static > +int bmi160_set_mode(struct bmi160_data *data, enum bmi160_sensor_type t, > + int mode) > +{ > + int ret; > + u8 cmd; > + > + if (mode) > + cmd = bmi160_regs[t].pmu_cmd_normal; > + else > + cmd = bmi160_regs[t].pmu_cmd_suspend; > + > + ret = regmap_write(data->regmap, BMI160_REG_CMD, cmd); > + if (ret < 0) > + return ret; > + > + usleep_range(bmi160_pmu_time[t].min, bmi160_pmu_time[t].max); > + > + return 0; > +} > + > +static > +int bmi160_set_scale(struct bmi160_data *data, enum bmi160_sensor_type t, > + int uscale) > +{ > + int i; > + > + for (i = 0; i < bmi160_scale_table[t].num; i++) > + if (bmi160_scale_table[t].tbl[i].uscale == uscale) > + break; > + > + if (i == bmi160_scale_table[t].num) > + return -EINVAL; > + > + return regmap_write(data->regmap, bmi160_regs[t].range, > + bmi160_scale_table[t].tbl[i].bits); > +} > + > +static > +int bmi160_get_scale(struct bmi160_data *data, enum bmi160_sensor_type t, > + int *uscale) > +{ > + int i, ret, val; > + > + ret = regmap_read(data->regmap, bmi160_regs[t].range, &val); > + if (ret < 0) > + return ret; > + > + for (i = 0; i < bmi160_scale_table[t].num; i++) > + if (bmi160_scale_table[t].tbl[i].bits == val) { > + *uscale = bmi160_scale_table[t].tbl[i].uscale; > + return 0; > + } > + > + return -EINVAL; > +} > + > +static int bmi160_get_data(struct bmi160_data *data, int chan_type, > + int axis, int *val) > +{ > + u8 reg; > + int ret; > + __le16 sample; > + enum bmi160_sensor_type t = bmi160_to_sensor(chan_type); > + > + reg = bmi160_regs[t].data + (axis - IIO_MOD_X) * 2; > + > + ret = regmap_bulk_read(data->regmap, reg, &sample, sizeof(sample)); This looks better for sample than in the trigger handler below. > + if (ret < 0) > + return ret; > + > + *val = sign_extend32(le16_to_cpu(sample), 15); > + > + return 0; > +} > + > +static > +int bmi160_set_odr(struct bmi160_data *data, enum bmi160_sensor_type t, > + int odr, int uodr) > +{ > + int i; > + > + for (i = 0; i < bmi160_odr_table[t].num; i++) > + if (bmi160_odr_table[t].tbl[i].odr == odr && > + bmi160_odr_table[t].tbl[i].uodr == uodr) > + break; > + > + if (i >= bmi160_odr_table[t].num) > + return -EINVAL; > + > + return regmap_update_bits(data->regmap, > + bmi160_regs[t].config, > + bmi160_odr_table[t].tbl[i].bits, > + bmi160_regs[t].config_odr_mask); > +} > + > +static int bmi160_get_odr(struct bmi160_data *data, enum bmi160_sensor_type t, > + int *odr, int *uodr) > +{ > + int i, val, ret; > + > + ret = regmap_read(data->regmap, bmi160_regs[t].config, &val); > + if (ret < 0) > + return ret; > + > + val &= bmi160_regs[t].config_odr_mask; > + > + for (i = 0; i < bmi160_odr_table[t].num; i++) > + if (val == bmi160_odr_table[t].tbl[i].bits) > + break; > + > + if (i >= bmi160_odr_table[t].num) > + return -EINVAL; > + > + *odr = bmi160_odr_table[t].tbl[i].odr; > + *uodr = bmi160_odr_table[t].tbl[i].uodr; > + > + return 0; > +} > + > +static irqreturn_t bmi160_trigger_handler(int irq, void *p) > +{ > + struct iio_poll_func *pf = p; > + struct iio_dev *indio_dev = pf->indio_dev; > + struct bmi160_data *data = iio_priv(indio_dev); > + s16 buf[16]; /* 3 sens x 3 axis x s16 + 3 x s16 pad + 4 x s16 tstamp */ > + int i, ret, sample, j = 0, base = BMI160_REG_DATA_MAGN_XOUT_L; > + > + for_each_set_bit(i, indio_dev->active_scan_mask, > + indio_dev->masklength) { Unless I'm missing something this could pass a stack variable into a dma transfer - where alignment needs to be right... Also, a fixed integer size would probably be wise for sample. > + ret = regmap_bulk_read(data->regmap, base + 2 * i, &sample, > + sizeof(sample)); > + if (ret < 0) > + goto done; > + buf[j++] = sample; > + } > + > + iio_push_to_buffers_with_timestamp(indio_dev, buf, iio_get_time_ns()); > +done: > + iio_trigger_notify_done(indio_dev->trig); > + return IRQ_HANDLED; > +} > + > +static int bmi160_read_raw(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, > + int *val, int *val2, long mask) > +{ > + int ret; > + struct bmi160_data *data = iio_priv(indio_dev); > + > + switch (mask) { > + case IIO_CHAN_INFO_RAW: > + ret = bmi160_get_data(data, chan->type, chan->channel2, val); > + if (ret < 0) > + return ret; > + return IIO_VAL_INT; > + case IIO_CHAN_INFO_SCALE: > + *val = 0; > + ret = bmi160_get_scale(data, > + bmi160_to_sensor(chan->type), val2); > + return ret < 0 ? ret : IIO_VAL_INT_PLUS_MICRO; > + case IIO_CHAN_INFO_SAMP_FREQ: > + ret = bmi160_get_odr(data, bmi160_to_sensor(chan->type), > + val, val2); > + return ret < 0 ? ret : IIO_VAL_INT_PLUS_MICRO; > + default: > + return -EINVAL; > + } > + > + return 0; > +} > + > +static int bmi160_write_raw(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, > + int val, int val2, long mask) > +{ > + struct bmi160_data *data = iio_priv(indio_dev); > + > + switch (mask) { > + case IIO_CHAN_INFO_SCALE: > + return bmi160_set_scale(data, > + bmi160_to_sensor(chan->type), val2); > + break; > + case IIO_CHAN_INFO_SAMP_FREQ: > + return bmi160_set_odr(data, bmi160_to_sensor(chan->type), > + val, val2); > + default: > + return -EINVAL; > + } > + > + return 0; > +} > + > +static const struct iio_info bmi160_info = { > + .driver_module = THIS_MODULE, > + .read_raw = bmi160_read_raw, > + .write_raw = bmi160_write_raw, > +}; > + > +static const char *bmi160_match_acpi_device(struct device *dev) > +{ > + const struct acpi_device_id *id; > + > + id = acpi_match_device(dev->driver->acpi_match_table, dev); > + if (!id) > + return NULL; > + > + return dev_name(dev); > +} > + > +static int bmi160_chip_init(struct bmi160_data *data, bool use_spi) > +{ > + int ret; > + unsigned int val; > + struct device *dev = regmap_get_device(data->regmap); > + > + ret = regmap_write(data->regmap, BMI160_REG_CMD, BMI160_CMD_SOFTRESET); > + if (ret < 0) > + return ret; > + > + usleep_range(BMI160_SOFTRESET_SLEEP, BMI160_SOFTRESET_SLEEP + 1); > + > + /* CS rising edge is needed before starting SPI, so do a dummy read */ Is this documented? Seems a little 'interesting'! > + if (use_spi) { > + ret = regmap_read(data->regmap, BMI160_REG_DUMMY, &val); > + if (ret < 0) > + return ret; > + } > + > + ret = regmap_read(data->regmap, BMI160_REG_CHIP_ID, &val); > + if (ret < 0) { > + dev_err(dev, "Error reading chip id\n"); > + return ret; > + } > + if (val != BMI160_CHIP_ID_VAL) { > + dev_err(dev, "Wrong chip id, got %x expected %x\n", > + val, BMI160_CHIP_ID_VAL); > + return -ENODEV; > + } > + > + ret = bmi160_set_mode(data, BMI160_ACCEL, 1); > + if (ret < 0) > + return ret; > + > + ret = bmi160_set_mode(data, BMI160_GYRO, 1); > + if (ret < 0) > + return ret; > + > + return 0; > +} > + > +static void bmi160_chip_uninit(struct bmi160_data *data) > +{ > + bmi160_set_mode(data, BMI160_GYRO, 0); > + bmi160_set_mode(data, BMI160_ACCEL, 0); > +} > + > +int bmi160_core_probe(struct device *dev, struct regmap *regmap, > + const char *name, bool use_spi) > +{ > + struct iio_dev *indio_dev; > + struct bmi160_data *data; > + int ret; > + > + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); > + if (!indio_dev) > + return -ENOMEM; > + > + data = iio_priv(indio_dev); > + dev_set_drvdata(dev, indio_dev); > + data->regmap = regmap; > + > + ret = bmi160_chip_init(data, use_spi); > + if (ret < 0) > + return ret; > + > + if (!name && ACPI_HANDLE(dev)) > + name = bmi160_match_acpi_device(dev); > + > + indio_dev->dev.parent = dev; > + indio_dev->channels = bmi160_channels; > + indio_dev->num_channels = ARRAY_SIZE(bmi160_channels); > + indio_dev->name = name; > + indio_dev->modes = INDIO_DIRECT_MODE; > + indio_dev->info = &bmi160_info; > + > + ret = iio_triggered_buffer_setup(indio_dev, NULL, > + bmi160_trigger_handler, NULL); > + if (ret < 0) > + goto uninit; > + > + ret = iio_device_register(indio_dev); > + if (ret < 0) > + goto buffer_cleanup; > + > + return 0; > +uninit: > + bmi160_chip_uninit(data); > +buffer_cleanup: > + iio_triggered_buffer_cleanup(indio_dev); > + return ret; > +} > +EXPORT_SYMBOL_GPL(bmi160_core_probe); > + > +void bmi160_core_remove(struct device *dev) > +{ > + struct iio_dev *indio_dev = dev_get_drvdata(dev); > + struct bmi160_data *data = iio_priv(indio_dev); > + > + iio_device_unregister(indio_dev); > + iio_triggered_buffer_cleanup(indio_dev); > + bmi160_chip_uninit(data); > +} > +EXPORT_SYMBOL_GPL(bmi160_core_remove); > + > +MODULE_AUTHOR("Daniel Baluta +MODULE_DESCRIPTION("Bosch BMI160 driver"); > +MODULE_LICENSE("GPL v2"); > diff --git a/drivers/iio/imu/bmi160/bmi160_i2c.c b/drivers/iio/imu/bmi160/bmi160_i2c.c > new file mode 100644 > index 0000000..af1feac > --- /dev/null > +++ b/drivers/iio/imu/bmi160/bmi160_i2c.c > @@ -0,0 +1,79 @@ > +/* > + * BMI160 - Bosch IMU, I2C bits > + * > + * Copyright (c) 2016, Intel Corporation. > + * > + * This file is subject to the terms and conditions of version 2 of > + * the GNU General Public License. See the file COPYING in the main > + * directory of this archive for more details. > + * > + * 7-bit I2C slave address is: > + * - 0x68 if SDO is pulled to GND > + * - 0x69 if SDO is pulled to VDDIO > + */ > +#include > +#include > +#include > + > +#include "bmi160.h" > + > +#define BMI160_I2C_DRV_NAME "bmi160_i2c" Could just use it inline given the one location in which it's used. > + > +static const struct regmap_config bmi160_regmap_config = { > + .reg_bits = 8, > + .val_bits = 8, > +}; Could share the regmap config between the two drivers by moving it to the core.. Not sure it's worth bothering though. > + > +static int bmi160_i2c_probe(struct i2c_client *client, > + const struct i2c_device_id *id) > +{ > + struct regmap *regmap; > + const char *name = NULL; > + > + regmap = devm_regmap_init_i2c(client, &bmi160_regmap_config); > + if (IS_ERR(regmap)) { > + dev_err(&client->dev, "Failed to register i2c regmap %d\n", > + (int)PTR_ERR(regmap)); > + return PTR_ERR(regmap); > + } > + > + if (id) > + name = id->name; > + > + return bmi160_core_probe(&client->dev, regmap, name, false); > +} > + > +static int bmi160_i2c_remove(struct i2c_client *client) > +{ > + bmi160_core_remove(&client->dev); > + > + return 0; > +} > + > +static const struct i2c_device_id bmi160_i2c_id[] = { > + {"bmi160", 0}, > + {} > +}; > +MODULE_DEVICE_TABLE(i2c, bmi160_i2c_id); > + > +static const struct acpi_device_id bmi160_acpi_match[] = { > + {"BMI0160", 0}, > + { }, > +}; > +MODULE_DEVICE_TABLE(acpi, bmi160_acpi_match); > + > +static struct i2c_driver bmi160_i2c_driver = { > + .driver = { > + .name = BMI160_I2C_DRV_NAME, > + .acpi_match_table = ACPI_PTR(bmi160_acpi_match), > + }, > + .probe = bmi160_i2c_probe, > + .remove = bmi160_i2c_remove, > + .id_table = bmi160_i2c_id, > +}; > + No blank line here - at least be consistent! > +module_i2c_driver(bmi160_i2c_driver); > + > +MODULE_AUTHOR("Daniel Baluta "); > +MODULE_DESCRIPTION("BMI160 I2C driver"); > +MODULE_LICENSE("GPL v2"); > diff --git a/drivers/iio/imu/bmi160/bmi160_spi.c b/drivers/iio/imu/bmi160/bmi160_spi.c > new file mode 100644 > index 0000000..444b723 > --- /dev/null > +++ b/drivers/iio/imu/bmi160/bmi160_spi.c > @@ -0,0 +1,71 @@ > +/* > + * BMI160 - Bosch IMU, SPI bits > + * > + * Copyright (c) 2016, Intel Corporation. > + * > + * This file is subject to the terms and conditions of version 2 of > + * the GNU General Public License. See the file COPYING in the main > + * directory of this archive for more details. > + * No need for this blank line ;) > + */ > +#include > +#include > +#include > + > +#include "bmi160.h" > + > +#define BMI160_SPI_DRV_NAME "bmi160_spi" Again, could just put the string inline without any loss of readability. > + > +static const struct regmap_config bmi160_regmap_config = { > + .reg_bits = 8, > + .val_bits = 8, > +}; > + > +static int bmi160_spi_probe(struct spi_device *spi) > +{ > + struct regmap *regmap; > + const struct spi_device_id *id = spi_get_device_id(spi); > + > + regmap = devm_regmap_init_spi(spi, &bmi160_regmap_config); > + if (IS_ERR(regmap)) { > + dev_err(&spi->dev, "Failed to register spi regmap %d\n", > + (int)PTR_ERR(regmap)); > + return PTR_ERR(regmap); > + } > + return bmi160_core_probe(&spi->dev, regmap, id->name, true); > +} > + > +static int bmi160_spi_remove(struct spi_device *spi) > +{ > + bmi160_core_remove(&spi->dev); > + > + return 0; > +} > + > +static const struct spi_device_id bmi160_spi_id[] = { > + {"bmi160", 0}, > + {} > +}; > + > +MODULE_DEVICE_TABLE(spi, bmi160_spi_id); > + > +static const struct acpi_device_id bmi160_acpi_match[] = { > + {"BMI0160", 0}, > + { }, > +}; > +MODULE_DEVICE_TABLE(acpi, bmi160_acpi_match); > + > +static struct spi_driver bmi160_spi_driver = { > + .probe = bmi160_spi_probe, > + .remove = bmi160_spi_remove, > + .id_table = bmi160_spi_id, > + .driver = { > + .acpi_match_table = ACPI_PTR(bmi160_acpi_match), > + .name = BMI160_SPI_DRV_NAME, > + }, > +}; > +module_spi_driver(bmi160_spi_driver); > + > +MODULE_AUTHOR("Daniel Baluta +MODULE_DESCRIPTION("Bosch BMI160 SPI driver"); > +MODULE_LICENSE("GPL v2"); >