All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Andreas Färber" <afaerber@suse.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 20/21] board: Add Qualcomm Dragonboard 410C support
Date: Tue, 5 Apr 2016 02:15:02 +0200	[thread overview]
Message-ID: <57030386.2050309@suse.de> (raw)
In-Reply-To: <20160404235445.GA23105@homes.emlix.com>

Am 05.04.2016 um 01:54 schrieb Daniel Gl?ckner:
> On Tue, Apr 05, 2016 at 01:13:38AM +0200, Andreas F?rber wrote:
>> Am 31.03.2016 um 23:12 schrieb Mateusz Kulikowski:
>>> +/* Environment */
>>> +#define CONFIG_EXTRA_ENV_SETTINGS \
>>> +	"reflash="CONFIG_ENV_REFLASH"\0"\
>>> +	"loadaddr=0x81000000\0" \
>>> +	"fdt_high=0xffffffffffffffff\0" \
>>> +	"initrd_high=0xffffffffffffffff\0" \
>>> +	"linux_image=Image\0" \

Is linux_image used anywhere? dhcp uses boot_script_dhcp.

>>> +	"linux_addr=0x81000000\0"\
>>
>> kernel_addr_r
>>
>>> +	"fdt_image=apq8016-sbc.dtb\0" \

fdtfile

>>> +	"fdt_addr=0x83000000\0"\
>>
>> fdt_addr_r
>>
>>> +	"ramdisk_addr=0x84000000\0"\
>>
>> ramdisk_addr_r
>>
>> These variables that the distro boot depends upon are missing/misnamed.
> 
> This reminds me that I had to add scriptaddr to make it run my boot.scr.

I'm testing a local patch but am on travel this week, so maybe Mateusz
or someone else is quicker.

Regards,
Andreas

-- 
SUSE Linux GmbH, Maxfeldstr. 5, 90409 N?rnberg, Germany
GF: Felix Imend?rffer, Jane Smithard, Graham Norton
HRB 21284 (AG N?rnberg)

  reply	other threads:[~2016-04-05  0:15 UTC|newest]

Thread overview: 53+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-31 21:12 [U-Boot] [PATCH v4 00/21] Add support for 96boards Dragonboard410C board Mateusz Kulikowski
2016-03-31 21:12 ` [U-Boot] [PATCH v4 01/21] serial: Add support for Qualcomm serial port Mateusz Kulikowski
2016-04-02  2:01   ` [U-Boot] [U-Boot, v4, " Tom Rini
2016-03-31 21:12 ` [U-Boot] [PATCH v4 02/21] gpio: Add support for Qualcomm gpio controller Mateusz Kulikowski
2016-04-02  2:01   ` [U-Boot] [U-Boot, v4, " Tom Rini
2016-03-31 21:12 ` [U-Boot] [PATCH v4 03/21] mmc: Add support for Qualcomm SDHCI controller Mateusz Kulikowski
2016-04-02  2:01   ` [U-Boot] [U-Boot, v4, " Tom Rini
2016-03-31 21:12 ` [U-Boot] [PATCH v4 04/21] ehci-hcd: Add init_after_reset Mateusz Kulikowski
2016-04-02  2:01   ` [U-Boot] [U-Boot,v4,04/21] " Tom Rini
2016-04-03 10:58     ` Bernhard Nortmann
2016-04-03 11:40       ` Mateusz Kulikowski
2016-03-31 21:12 ` [U-Boot] [PATCH v4 05/21] usb: ulpi: Add Kconfig options for ULPI Mateusz Kulikowski
2016-04-02  2:01   ` [U-Boot] [U-Boot, v4, " Tom Rini
2016-03-31 21:12 ` [U-Boot] [PATCH v4 06/21] Migrate CONFIG_ULPI* to Kconfig Mateusz Kulikowski
2016-04-02  2:02   ` [U-Boot] [U-Boot,v4,06/21] " Tom Rini
2016-03-31 21:12 ` [U-Boot] [PATCH v4 07/21] usb: ulpi: Fix viewport_addr type Mateusz Kulikowski
2016-04-02  2:02   ` [U-Boot] [U-Boot,v4,07/21] " Tom Rini
2016-03-31 21:12 ` [U-Boot] [PATCH v4 08/21] usb: ulpi: Fix compile warning in read/write on 64-bit machines Mateusz Kulikowski
2016-04-02  2:02   ` [U-Boot] [U-Boot, v4, " Tom Rini
2016-03-31 21:12 ` [U-Boot] [PATCH v4 09/21] eth: asix88179: Print packet length properly Mateusz Kulikowski
2016-04-02  2:02   ` [U-Boot] [U-Boot, v4, " Tom Rini
2016-03-31 21:12 ` [U-Boot] [PATCH v4 10/21] usb: Rename ehci-fsl.h to ehci-ci.h Mateusz Kulikowski
2016-04-02  2:02   ` [U-Boot] [U-Boot,v4,10/21] " Tom Rini
2016-03-31 21:12 ` [U-Boot] [PATCH v4 11/21] usb: ehci-ci: Add missing registers Mateusz Kulikowski
2016-04-02  2:02   ` [U-Boot] [U-Boot, v4, " Tom Rini
2016-03-31 21:12 ` [U-Boot] [PATCH v4 12/21] ehci-ci.h: drop generic USBCMD fields Mateusz Kulikowski
2016-04-02  2:03   ` [U-Boot] [U-Boot, v4, " Tom Rini
2016-03-31 21:12 ` [U-Boot] [PATCH v4 13/21] ehci: Add support for Qualcomm EHCI Mateusz Kulikowski
2016-04-02  2:03   ` [U-Boot] [U-Boot,v4,13/21] " Tom Rini
2016-03-31 21:12 ` [U-Boot] [PATCH v4 14/21] drivers: Add SPMI bus uclass Mateusz Kulikowski
2016-04-02  2:04   ` [U-Boot] [U-Boot,v4,14/21] " Tom Rini
2016-03-31 21:12 ` [U-Boot] [PATCH v4 15/21] spmi: Add sandbox test driver Mateusz Kulikowski
2016-04-02  2:04   ` [U-Boot] [U-Boot,v4,15/21] " Tom Rini
2016-04-04 15:49     ` Stephen Warren
2016-04-04 16:19       ` Mateusz Kulikowski
2016-04-04 17:09         ` Stephen Warren
2016-04-04 18:02           ` Mateusz Kulikowski
2016-04-04 17:16       ` Tom Rini
2016-03-31 21:12 ` [U-Boot] [PATCH v4 16/21] drivers: spmi: Add support for Qualcomm SPMI bus driver Mateusz Kulikowski
2016-04-02  2:04   ` [U-Boot] [U-Boot, v4, " Tom Rini
2016-03-31 21:12 ` [U-Boot] [PATCH v4 17/21] pmic: Add support for Qualcomm PM8916 PMIC Mateusz Kulikowski
2016-04-02  2:04   ` [U-Boot] [U-Boot, v4, " Tom Rini
2016-03-31 21:12 ` [U-Boot] [PATCH v4 18/21] gpio: Add support for Qualcomm PM8916 gpios Mateusz Kulikowski
2016-04-02  2:05   ` [U-Boot] [U-Boot, v4, " Tom Rini
2016-03-31 21:12 ` [U-Boot] [PATCH v4 19/21] arm: Add support for Qualcomm Snapdragon family Mateusz Kulikowski
2016-04-02  2:05   ` [U-Boot] [U-Boot, v4, " Tom Rini
2016-03-31 21:12 ` [U-Boot] [PATCH v4 20/21] board: Add Qualcomm Dragonboard 410C support Mateusz Kulikowski
2016-04-02  2:05   ` [U-Boot] [U-Boot, v4, " Tom Rini
2016-04-04 23:13   ` [U-Boot] [PATCH v4 " Andreas Färber
2016-04-04 23:54     ` Daniel Glöckner
2016-04-05  0:15       ` Andreas Färber [this message]
2016-03-31 21:12 ` [U-Boot] [PATCH v4 21/21] Add myself as Snapdragon and SPMI maintainer Mateusz Kulikowski
2016-04-02  2:06   ` [U-Boot] [U-Boot, v4, " Tom Rini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=57030386.2050309@suse.de \
    --to=afaerber@suse.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.