From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Wed, 13 Apr 2016 12:23:37 +0200 Subject: [U-Boot] [PULL] Please pull u-boot-imx Message-ID: <570E1E29.4070201@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Tom, please pull from u-boot-imx, thanks ! The following changes since commit e4fb863f6dec0002069d57422ebe3ce3af69a273: dm: blk: Add tests for block devices (2016-03-17 21:27:39 -0600) are available in the git repository at: git://www.denx.de/git/u-boot-imx.git master for you to fetch changes up to 59c9e9b408014025cfa158a98aeafbcf33aa2d3d: mx6slevk: imximage.cfg: update to fix tINIT3 and tIH-CA violations (2016-04-03 19:18:45 +0200) ---------------------------------------------------------------- Akshay Bhat (1): arm: imx: Add support for GE Bx50v3 boards Fabio Estevam (10): mx7_common: Remove unexisting options mx7dsabresd: Define serial port locally mx7: Distinguish between dual and solo versions mx6sabre_common: Fix U-Boot corruption after 'saveenv' mx6sabresd: Use VESA 1024x768 timings mx7_common: Put early/late init configs into board file warp7: Add initial support mx6sabresd: Remove unneeded enable_lvds() function warp7: Pass the UART base definition mx7_common: Define CONFIG_SYS_MALLOC_LEN in the board file Leonid Iziumtsev (1): mx27: 16-bit wide watchdog registers Marek Vasut (3): arm: mx5: Enable NAND TrimFFS on M53EVK arm: imx6: Switch DDR3 calibration to wait_for_bit() arm: mxs: Update MX28EVK config Peng Fan (5): imx: mx6ul: skip setting ahb rate imx: mx6ul configure the PMIC_STBY_REQ pin as open drain imx: print ARM clock for clocks command imx: mx6sx: move MX6SX to Kconfig entry imx: mx7d: move MX7D to Kconfig entry Stefan Roese (2): arm: mx6: Add UART8 base address for i.MX6UL arm: mx6: Add CCV xPress board support Stefano Babic (1): Merge branch 'next' Tom Rini (2): mx6qarm2: imximage_mx6dl.cfg update to fix tINIT3 violation mx6slevk: imximage.cfg: update to fix tINIT3 and tIH-CA violations Ye Li (1): imx: mx6: Fix incorrect clear mmdc_ch0 handshake mask arch/arm/cpu/arm926ejs/mx27/reset.c | 8 +- arch/arm/cpu/armv7/mx6/Kconfig | 23 ++ arch/arm/cpu/armv7/mx6/clock.c | 1 + arch/arm/cpu/armv7/mx6/ddr.c | 44 +-- arch/arm/cpu/armv7/mx6/soc.c | 36 +- arch/arm/cpu/armv7/mx7/Kconfig | 8 + arch/arm/cpu/armv7/mx7/soc.c | 18 + arch/arm/imx-common/cpu.c | 2 + arch/arm/include/asm/arch-imx/cpu.h | 1 + arch/arm/include/asm/arch-mx27/imx-regs.h | 6 +- arch/arm/include/asm/arch-mx6/imx-regs.h | 1 + board/ccv/xpress/Kconfig | 12 + board/ccv/xpress/MAINTAINERS | 7 + board/ccv/xpress/Makefile | 8 + board/ccv/xpress/imximage.cfg | 176 +++++++++ board/ccv/xpress/spl.c | 116 ++++++ board/ccv/xpress/xpress.c | 331 +++++++++++++++++ board/freescale/mx6qarm2/imximage_mx6dl.cfg | 4 +- board/freescale/mx6sabresd/mx6sabresd.c | 40 +-- board/freescale/mx6slevk/imximage.cfg | 4 +- board/ge/bx50v3/Kconfig | 18 + board/ge/bx50v3/MAINTAINERS | 8 + board/ge/bx50v3/Makefile | 8 + board/ge/bx50v3/bx50v3.c | 533 ++++++++++++++++++++++++++++ board/ge/bx50v3/bx50v3.cfg | 151 ++++++++ board/warp7/Kconfig | 9 + board/warp7/MAINTAINERS | 6 + board/warp7/Makefile | 6 + board/warp7/imximage.cfg | 95 +++++ board/warp7/warp7.c | 102 ++++++ configs/ge_b450v3_defconfig | 8 + configs/ge_b650v3_defconfig | 8 + configs/ge_b850v3_defconfig | 8 + configs/mx28evk_defconfig | 1 + configs/mx6sxsabreauto_defconfig | 2 +- configs/mx6sxsabresd_defconfig | 2 +- configs/mx6sxsabresd_spl_defconfig | 2 +- configs/mx7dsabresd_defconfig | 2 +- configs/warp7_defconfig | 12 + configs/xpress_defconfig | 6 + configs/xpress_spl_defconfig | 7 + include/configs/ge_bx50v3.h | 349 ++++++++++++++++++ include/configs/m53evk.h | 1 + include/configs/mx28evk.h | 3 + include/configs/mx6sabre_common.h | 2 +- include/configs/mx7_common.h | 10 - include/configs/mx7dsabresd.h | 8 + include/configs/warp7.h | 155 ++++++++ include/configs/xpress.h | 166 +++++++++ 49 files changed, 2442 insertions(+), 92 deletions(-) create mode 100644 board/ccv/xpress/Kconfig create mode 100644 board/ccv/xpress/MAINTAINERS create mode 100644 board/ccv/xpress/Makefile create mode 100644 board/ccv/xpress/imximage.cfg create mode 100644 board/ccv/xpress/spl.c create mode 100644 board/ccv/xpress/xpress.c create mode 100644 board/ge/bx50v3/Kconfig create mode 100644 board/ge/bx50v3/MAINTAINERS create mode 100644 board/ge/bx50v3/Makefile create mode 100644 board/ge/bx50v3/bx50v3.c create mode 100644 board/ge/bx50v3/bx50v3.cfg create mode 100644 board/warp7/Kconfig create mode 100644 board/warp7/MAINTAINERS create mode 100644 board/warp7/Makefile create mode 100644 board/warp7/imximage.cfg create mode 100644 board/warp7/warp7.c create mode 100644 configs/ge_b450v3_defconfig create mode 100644 configs/ge_b650v3_defconfig create mode 100644 configs/ge_b850v3_defconfig create mode 100644 configs/warp7_defconfig create mode 100644 configs/xpress_defconfig create mode 100644 configs/xpress_spl_defconfig create mode 100644 include/configs/ge_bx50v3.h create mode 100644 include/configs/warp7.h create mode 100644 include/configs/xpress.h -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================