From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753836AbcDMQFK (ORCPT ); Wed, 13 Apr 2016 12:05:10 -0400 Received: from eusmtp01.atmel.com ([212.144.249.242]:16294 "EHLO eusmtp01.atmel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753803AbcDMQFI (ORCPT ); Wed, 13 Apr 2016 12:05:08 -0400 Subject: Re: [PATCH v6 04/50] mtd: nand: atmel: use mtd_ooblayout_xxx() helpers where appropriate To: Boris Brezillon , David Woodhouse , Brian Norris , , Richard Weinberger References: <1459354505-32551-5-git-send-email-boris.brezillon@free-electrons.com> <1460562827-30990-1-git-send-email-boris.brezillon@free-electrons.com> CC: , Jean-Christophe Plagniol-Villard , Alexandre Belloni , Wenyou Yang , Josh Wu , From: Nicolas Ferre X-Enigmail-Draft-Status: N1110 Organization: atmel Message-ID: <570E6E44.8060900@atmel.com> Date: Wed, 13 Apr 2016 18:05:24 +0200 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:38.0) Gecko/20100101 Thunderbird/38.6.0 MIME-Version: 1.0 In-Reply-To: <1460562827-30990-1-git-send-email-boris.brezillon@free-electrons.com> Content-Type: text/plain; charset="windows-1252" Content-Transfer-Encoding: 8bit X-Originating-IP: [10.161.30.18] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Le 13/04/2016 17:53, Boris Brezillon a écrit : > The mtd_ooblayout_xxx() helper functions have been added to avoid direct > accesses to the ecclayout field, and thus ease for future reworks. > Use these helpers in all places where the oobfree[] and eccpos[] arrays > where directly accessed. > > Signed-off-by: Boris Brezillon Thanks for the quick rework Boris! Reviewed-by: Nicolas Ferre > --- > drivers/mtd/nand/atmel_nand.c | 50 +++++++++++++++++++++++++++---------------- > 1 file changed, 31 insertions(+), 19 deletions(-) > > diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c > index 5e716f2..b132c8f 100644 > --- a/drivers/mtd/nand/atmel_nand.c > +++ b/drivers/mtd/nand/atmel_nand.c > @@ -833,13 +833,16 @@ static void pmecc_correct_data(struct mtd_info *mtd, uint8_t *buf, uint8_t *ecc, > dev_dbg(host->dev, "Bit flip in data area, byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n", > pos, bit_pos, err_byte, *(buf + byte_pos)); > } else { > + struct mtd_oob_region oobregion; > + > /* Bit flip in OOB area */ > tmp = sector_num * nand_chip->ecc.bytes > + (byte_pos - sector_size); > err_byte = ecc[tmp]; > ecc[tmp] ^= (1 << bit_pos); > > - pos = tmp + nand_chip->ecc.layout->eccpos[0]; > + mtd_ooblayout_ecc(mtd, 0, &oobregion); > + pos = tmp + oobregion.offset; > dev_dbg(host->dev, "Bit flip in OOB, oob_byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n", > pos, bit_pos, err_byte, ecc[tmp]); > } > @@ -931,7 +934,6 @@ static int atmel_nand_pmecc_read_page(struct mtd_info *mtd, > struct atmel_nand_host *host = nand_get_controller_data(chip); > int eccsize = chip->ecc.size * chip->ecc.steps; > uint8_t *oob = chip->oob_poi; > - uint32_t *eccpos = chip->ecc.layout->eccpos; > uint32_t stat; > unsigned long end_time; > int bitflips = 0; > @@ -953,7 +955,11 @@ static int atmel_nand_pmecc_read_page(struct mtd_info *mtd, > > stat = pmecc_readl_relaxed(host->ecc, ISR); > if (stat != 0) { > - bitflips = pmecc_correction(mtd, stat, buf, &oob[eccpos[0]]); > + struct mtd_oob_region oobregion; > + > + mtd_ooblayout_ecc(mtd, 0, &oobregion); > + bitflips = pmecc_correction(mtd, stat, buf, > + &oob[oobregion.offset]); > if (bitflips < 0) > /* uncorrectable errors */ > return 0; > @@ -967,8 +973,8 @@ static int atmel_nand_pmecc_write_page(struct mtd_info *mtd, > int page) > { > struct atmel_nand_host *host = nand_get_controller_data(chip); > - uint32_t *eccpos = chip->ecc.layout->eccpos; > - int i, j; > + struct mtd_oob_region oobregion = { }; > + int i, j, section = 0; > unsigned long end_time; > > if (!host->nfc || !host->nfc->write_by_sram) { > @@ -987,11 +993,14 @@ static int atmel_nand_pmecc_write_page(struct mtd_info *mtd, > > for (i = 0; i < chip->ecc.steps; i++) { > for (j = 0; j < chip->ecc.bytes; j++) { > - int pos; > + if (!oobregion.length) > + mtd_ooblayout_ecc(mtd, section, &oobregion); > > - pos = i * chip->ecc.bytes + j; > - chip->oob_poi[eccpos[pos]] = > + chip->oob_poi[oobregion.offset] = > pmecc_readb_ecc_relaxed(host->ecc, i, j); > + oobregion.length--; > + oobregion.offset++; > + section++; > } > } > chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); > @@ -1005,6 +1014,7 @@ static void atmel_pmecc_core_init(struct mtd_info *mtd) > struct atmel_nand_host *host = nand_get_controller_data(nand_chip); > uint32_t val = 0; > struct nand_ecclayout *ecc_layout; > + struct mtd_oob_region oobregion; > > pmecc_writel(host->ecc, CTRL, PMECC_CTRL_RST); > pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DISABLE); > @@ -1056,9 +1066,10 @@ static void atmel_pmecc_core_init(struct mtd_info *mtd) > > ecc_layout = nand_chip->ecc.layout; > pmecc_writel(host->ecc, SAREA, mtd->oobsize - 1); > - pmecc_writel(host->ecc, SADDR, ecc_layout->eccpos[0]); > + mtd_ooblayout_ecc(mtd, 0, &oobregion); > + pmecc_writel(host->ecc, SADDR, oobregion.offset); > pmecc_writel(host->ecc, EADDR, > - ecc_layout->eccpos[ecc_layout->eccbytes - 1]); > + oobregion.offset + ecc_layout->eccbytes - 1); > /* See datasheet about PMECC Clock Control Register */ > pmecc_writel(host->ecc, CLK, 2); > pmecc_writel(host->ecc, IDR, 0xff); > @@ -1359,12 +1370,12 @@ static int atmel_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip, > { > int eccsize = chip->ecc.size; > int eccbytes = chip->ecc.bytes; > - uint32_t *eccpos = chip->ecc.layout->eccpos; > uint8_t *p = buf; > uint8_t *oob = chip->oob_poi; > uint8_t *ecc_pos; > int stat; > unsigned int max_bitflips = 0; > + struct mtd_oob_region oobregion = {}; > > /* > * Errata: ALE is incorrectly wired up to the ECC controller > @@ -1382,19 +1393,20 @@ static int atmel_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip, > chip->read_buf(mtd, p, eccsize); > > /* move to ECC position if needed */ > - if (eccpos[0] != 0) { > - /* This only works on large pages > - * because the ECC controller waits for > - * NAND_CMD_RNDOUTSTART after the > - * NAND_CMD_RNDOUT. > - * anyway, for small pages, the eccpos[0] == 0 > + mtd_ooblayout_ecc(mtd, 0, &oobregion); > + if (oobregion.offset != 0) { > + /* > + * This only works on large pages because the ECC controller > + * waits for NAND_CMD_RNDOUTSTART after the NAND_CMD_RNDOUT. > + * Anyway, for small pages, the first ECC byte is at offset > + * 0 in the OOB area. > */ > chip->cmdfunc(mtd, NAND_CMD_RNDOUT, > - mtd->writesize + eccpos[0], -1); > + mtd->writesize + oobregion.offset, -1); > } > > /* the ECC controller needs to read the ECC just after the data */ > - ecc_pos = oob + eccpos[0]; > + ecc_pos = oob + oobregion.offset; > chip->read_buf(mtd, ecc_pos, eccbytes); > > /* check if there's an error */ > -- Nicolas Ferre From mboxrd@z Thu Jan 1 00:00:00 1970 From: nicolas.ferre@atmel.com (Nicolas Ferre) Date: Wed, 13 Apr 2016 18:05:24 +0200 Subject: [PATCH v6 04/50] mtd: nand: atmel: use mtd_ooblayout_xxx() helpers where appropriate In-Reply-To: <1460562827-30990-1-git-send-email-boris.brezillon@free-electrons.com> References: <1459354505-32551-5-git-send-email-boris.brezillon@free-electrons.com> <1460562827-30990-1-git-send-email-boris.brezillon@free-electrons.com> Message-ID: <570E6E44.8060900@atmel.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Le 13/04/2016 17:53, Boris Brezillon a ?crit : > The mtd_ooblayout_xxx() helper functions have been added to avoid direct > accesses to the ecclayout field, and thus ease for future reworks. > Use these helpers in all places where the oobfree[] and eccpos[] arrays > where directly accessed. > > Signed-off-by: Boris Brezillon Thanks for the quick rework Boris! Reviewed-by: Nicolas Ferre > --- > drivers/mtd/nand/atmel_nand.c | 50 +++++++++++++++++++++++++++---------------- > 1 file changed, 31 insertions(+), 19 deletions(-) > > diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c > index 5e716f2..b132c8f 100644 > --- a/drivers/mtd/nand/atmel_nand.c > +++ b/drivers/mtd/nand/atmel_nand.c > @@ -833,13 +833,16 @@ static void pmecc_correct_data(struct mtd_info *mtd, uint8_t *buf, uint8_t *ecc, > dev_dbg(host->dev, "Bit flip in data area, byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n", > pos, bit_pos, err_byte, *(buf + byte_pos)); > } else { > + struct mtd_oob_region oobregion; > + > /* Bit flip in OOB area */ > tmp = sector_num * nand_chip->ecc.bytes > + (byte_pos - sector_size); > err_byte = ecc[tmp]; > ecc[tmp] ^= (1 << bit_pos); > > - pos = tmp + nand_chip->ecc.layout->eccpos[0]; > + mtd_ooblayout_ecc(mtd, 0, &oobregion); > + pos = tmp + oobregion.offset; > dev_dbg(host->dev, "Bit flip in OOB, oob_byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n", > pos, bit_pos, err_byte, ecc[tmp]); > } > @@ -931,7 +934,6 @@ static int atmel_nand_pmecc_read_page(struct mtd_info *mtd, > struct atmel_nand_host *host = nand_get_controller_data(chip); > int eccsize = chip->ecc.size * chip->ecc.steps; > uint8_t *oob = chip->oob_poi; > - uint32_t *eccpos = chip->ecc.layout->eccpos; > uint32_t stat; > unsigned long end_time; > int bitflips = 0; > @@ -953,7 +955,11 @@ static int atmel_nand_pmecc_read_page(struct mtd_info *mtd, > > stat = pmecc_readl_relaxed(host->ecc, ISR); > if (stat != 0) { > - bitflips = pmecc_correction(mtd, stat, buf, &oob[eccpos[0]]); > + struct mtd_oob_region oobregion; > + > + mtd_ooblayout_ecc(mtd, 0, &oobregion); > + bitflips = pmecc_correction(mtd, stat, buf, > + &oob[oobregion.offset]); > if (bitflips < 0) > /* uncorrectable errors */ > return 0; > @@ -967,8 +973,8 @@ static int atmel_nand_pmecc_write_page(struct mtd_info *mtd, > int page) > { > struct atmel_nand_host *host = nand_get_controller_data(chip); > - uint32_t *eccpos = chip->ecc.layout->eccpos; > - int i, j; > + struct mtd_oob_region oobregion = { }; > + int i, j, section = 0; > unsigned long end_time; > > if (!host->nfc || !host->nfc->write_by_sram) { > @@ -987,11 +993,14 @@ static int atmel_nand_pmecc_write_page(struct mtd_info *mtd, > > for (i = 0; i < chip->ecc.steps; i++) { > for (j = 0; j < chip->ecc.bytes; j++) { > - int pos; > + if (!oobregion.length) > + mtd_ooblayout_ecc(mtd, section, &oobregion); > > - pos = i * chip->ecc.bytes + j; > - chip->oob_poi[eccpos[pos]] = > + chip->oob_poi[oobregion.offset] = > pmecc_readb_ecc_relaxed(host->ecc, i, j); > + oobregion.length--; > + oobregion.offset++; > + section++; > } > } > chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); > @@ -1005,6 +1014,7 @@ static void atmel_pmecc_core_init(struct mtd_info *mtd) > struct atmel_nand_host *host = nand_get_controller_data(nand_chip); > uint32_t val = 0; > struct nand_ecclayout *ecc_layout; > + struct mtd_oob_region oobregion; > > pmecc_writel(host->ecc, CTRL, PMECC_CTRL_RST); > pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DISABLE); > @@ -1056,9 +1066,10 @@ static void atmel_pmecc_core_init(struct mtd_info *mtd) > > ecc_layout = nand_chip->ecc.layout; > pmecc_writel(host->ecc, SAREA, mtd->oobsize - 1); > - pmecc_writel(host->ecc, SADDR, ecc_layout->eccpos[0]); > + mtd_ooblayout_ecc(mtd, 0, &oobregion); > + pmecc_writel(host->ecc, SADDR, oobregion.offset); > pmecc_writel(host->ecc, EADDR, > - ecc_layout->eccpos[ecc_layout->eccbytes - 1]); > + oobregion.offset + ecc_layout->eccbytes - 1); > /* See datasheet about PMECC Clock Control Register */ > pmecc_writel(host->ecc, CLK, 2); > pmecc_writel(host->ecc, IDR, 0xff); > @@ -1359,12 +1370,12 @@ static int atmel_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip, > { > int eccsize = chip->ecc.size; > int eccbytes = chip->ecc.bytes; > - uint32_t *eccpos = chip->ecc.layout->eccpos; > uint8_t *p = buf; > uint8_t *oob = chip->oob_poi; > uint8_t *ecc_pos; > int stat; > unsigned int max_bitflips = 0; > + struct mtd_oob_region oobregion = {}; > > /* > * Errata: ALE is incorrectly wired up to the ECC controller > @@ -1382,19 +1393,20 @@ static int atmel_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip, > chip->read_buf(mtd, p, eccsize); > > /* move to ECC position if needed */ > - if (eccpos[0] != 0) { > - /* This only works on large pages > - * because the ECC controller waits for > - * NAND_CMD_RNDOUTSTART after the > - * NAND_CMD_RNDOUT. > - * anyway, for small pages, the eccpos[0] == 0 > + mtd_ooblayout_ecc(mtd, 0, &oobregion); > + if (oobregion.offset != 0) { > + /* > + * This only works on large pages because the ECC controller > + * waits for NAND_CMD_RNDOUTSTART after the NAND_CMD_RNDOUT. > + * Anyway, for small pages, the first ECC byte is at offset > + * 0 in the OOB area. > */ > chip->cmdfunc(mtd, NAND_CMD_RNDOUT, > - mtd->writesize + eccpos[0], -1); > + mtd->writesize + oobregion.offset, -1); > } > > /* the ECC controller needs to read the ECC just after the data */ > - ecc_pos = oob + eccpos[0]; > + ecc_pos = oob + oobregion.offset; > chip->read_buf(mtd, ecc_pos, eccbytes); > > /* check if there's an error */ > -- Nicolas Ferre