Re: [meta-fsl-arm] kobs-ng tool?

[Gary Thomas <gary@mlbassoc.com>]

On 2016-04-13 16:13, Otavio Salvador wrote:
> On Wed, Apr 13, 2016 at 11:04 AM, Gary Thomas <gary@mlbassoc.com> wrote:
>> On 2016-04-13 15:38, Otavio Salvador wrote:
>>>
>>> On Wed, Apr 13, 2016 at 8:48 AM, Gary Thomas <gary@mlbassoc.com> wrote:
>>>>
>>>> I have a recipe (don't recall where I found it, it was a while ago)
>>>> for kobs-ng_3.0.35-4.1.0.bb
>>>>
>>>> The tool created by this recipe doesn't seem to work with my i.MX6UL
>>>> target and indeed the NAND image created does not come close to matching
>>>> what the FreeScale manufacturing tool creates using the same U-Boot
>>>> image.
>>>>
>>>> Does anyone know where I can find a more recent tool (I tried the
>>>> cited website and ended up in Russia!)?  I really need to get this
>>>> working with my i.MX6UL target.
>>>
>>>
>>> imx-kobs ;-)
>>
>>
>> Sadly, that's not building for my target.
>>
>> MACHINE           = "imx6ulevk"
>> meta              = "master:778121ab844af623a215430ba579a5fb3947928b"
>> meta-fsl-arm      = "master:cec4c47e33979631e85e2c933cea5182da61ad82"
>>
>> Error log attached.  Any ideas?
>
> Not on top of my head.
>
> Maybe someone inside NXP might help?
>

I generated a patch for this problem but the recipe (and sources)
are scant on details.  Anyone know where I should send the patch
upstream, and/or discuss issues with this tool?

Thanks

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------