* [PATCH v3] iio: tools: generic_buffer: auto-enable channels
@ 2016-04-14 8:26 Linus Walleij
2016-04-17 11:31 ` Jonathan Cameron
0 siblings, 1 reply; 2+ messages in thread
From: Linus Walleij @ 2016-04-14 8:26 UTC (permalink / raw)
To: Jonathan Cameron, linux-iio; +Cc: Linus Walleij, Peter Meerwald-Stadler
If no channels are enabled when we run generic_buffer on a
device, add a command-line option to just enable all of them,
run the sampling and disable them all again afterwards.
This is extremely useful when I'm low-level testing my
sensors with interrupts and triggers, sample session:
root@Ux500:/ lsiio
Device 000: lsm303dlh_accel
Device 001: lis331dl_accel
Device 002: l3g4200d
Device 003: lsm303dlh_magn
Device 004: lps001wp
Trigger 000: lsm303dlh_accel-trigger
Trigger 001: lis331dl_accel-trigger
Trigger 002: l3g4200d-trigger
root@Ux500:/ generic_buffer -a -c 10 -n l3g4200d
iio device number being used is 2
iio trigger number being used is 2
No channels are enabled, enabling all channels
Enabling: in_anglvel_x_en
Enabling: in_anglvel_y_en
Enabling: in_anglvel_z_en
Enabling: in_timestamp_en
/sys/bus/iio/devices/iio:device2 l3g4200d-trigger
-3.593664 -0.713133 4.870143 946684863662292480
3.225546 0.867357 -4.945878 946684863671875000
-0.676413 0.127296 0.106641 946684863681488037
-0.661113 0.110160 0.128826 946684863690673828
-0.664173 0.113067 0.123471 946684863700683593
-0.664938 0.109395 0.124848 946684863710144042
-0.664173 0.110619 0.130203 946684863719512939
-0.666162 0.111231 0.132651 946684863729125976
-0.668610 0.111690 0.130662 946684863738739013
-0.660501 0.110466 0.131733 946684863748565673
Disabling: in_anglvel_x_en
Disabling: in_anglvel_y_en
Disabling: in_anglvel_z_en
Disabling: in_timestamp_en
Pure awesomeness. If some channels have been enabled through
scripts or manual interaction, nothing happens.
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Acked-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v2->v3:
- Use an enum for channel enablement state
- Rename check_suffix() to iioutils_check_suffix()
- Fix a bug in a corner case for the iioutils_check_suffix()
function
- Staticize the function enabling all channels
- Restore helptext when no channels are enabled and
autochannels are not enabled either: we should bail out
with the error message like before
ChangeLog v1->v2:
- Provide for using the -a flag to indicate that you want all
available channels enabled.
---
tools/iio/generic_buffer.c | 102 +++++++++++++++++++++++++++++++++++++++++++--
tools/iio/iio_utils.h | 7 ++++
2 files changed, 105 insertions(+), 4 deletions(-)
diff --git a/tools/iio/generic_buffer.c b/tools/iio/generic_buffer.c
index c42b7f836b48..2429c78de940 100644
--- a/tools/iio/generic_buffer.c
+++ b/tools/iio/generic_buffer.c
@@ -35,6 +35,15 @@
#include "iio_utils.h"
/**
+ * enum autochan - state for the automatic channel enabling mechanism
+ */
+enum autochan {
+ AUTOCHANNELS_DISABLED,
+ AUTOCHANNELS_ENABLED,
+ AUTOCHANNELS_ACTIVE,
+};
+
+/**
* size_from_channelarray() - calculate the storage size of a scan
* @channels: the channel info array
* @num_channels: number of channels
@@ -191,10 +200,51 @@ void process_scan(char *data,
printf("\n");
}
+static int enable_disable_all_channels(char *dev_dir_name, int enable)
+{
+ const struct dirent *ent;
+ char scanelemdir[256];
+ DIR *dp;
+ int ret;
+
+ snprintf(scanelemdir, sizeof(scanelemdir),
+ FORMAT_SCAN_ELEMENTS_DIR, dev_dir_name);
+ scanelemdir[sizeof(scanelemdir)-1] = '\0';
+
+ dp = opendir(scanelemdir);
+ if (!dp) {
+ fprintf(stderr, "Enabling/disabling channels: can't open %s\n",
+ scanelemdir);
+ return -EIO;
+ }
+
+ ret = -ENOENT;
+ while (ent = readdir(dp), ent) {
+ if (iioutils_check_suffix(ent->d_name, "_en")) {
+ printf("%sabling: %s\n",
+ enable ? "En" : "Dis",
+ ent->d_name);
+ ret = write_sysfs_int(ent->d_name, scanelemdir,
+ enable);
+ if (ret < 0)
+ fprintf(stderr, "Failed to enable/disable %s\n",
+ ent->d_name);
+ }
+ }
+
+ if (closedir(dp) == -1) {
+ perror("Enabling/disabling channels: "
+ "Failed to close directory");
+ return -errno;
+ }
+ return 0;
+}
+
void print_usage(void)
{
fprintf(stderr, "Usage: generic_buffer [options]...\n"
"Capture, convert and output data from IIO device buffer\n"
+ " -a Auto-activate all available channels\n"
" -c <n> Do n conversions\n"
" -e Disable wait for event (new data)\n"
" -g Use trigger-less mode\n"
@@ -225,12 +275,16 @@ int main(int argc, char **argv)
int scan_size;
int noevents = 0;
int notrigger = 0;
+ enum autochan autochannels = AUTOCHANNELS_DISABLED;
char *dummy;
struct iio_channel_info *channels;
- while ((c = getopt(argc, argv, "c:egl:n:t:w:")) != -1) {
+ while ((c = getopt(argc, argv, "ac:egl:n:t:w:")) != -1) {
switch (c) {
+ case 'a':
+ autochannels = AUTOCHANNELS_ENABLED;
+ break;
case 'c':
errno = 0;
num_loops = strtoul(optarg, &dummy, 10);
@@ -340,12 +394,47 @@ int main(int argc, char **argv)
"diag %s\n", dev_dir_name);
goto error_free_triggername;
}
- if (!num_channels) {
+ if (num_channels && autochannels == AUTOCHANNELS_ENABLED) {
+ fprintf(stderr, "Auto-channels selected but some channels "
+ "are already activated in sysfs\n");
+ fprintf(stderr, "Proceeding without activating any channels\n");
+ }
+
+ if (!num_channels && autochannels == AUTOCHANNELS_ENABLED) {
+ fprintf(stderr,
+ "No channels are enabled, enabling all channels\n");
+
+ ret = enable_disable_all_channels(dev_dir_name, 1);
+ if (ret) {
+ fprintf(stderr, "Failed to enable all channels\n");
+ goto error_free_triggername;
+ }
+
+ /* This flags that we need to disable the channels again */
+ autochannels = AUTOCHANNELS_ACTIVE;
+
+ ret = build_channel_array(dev_dir_name, &channels,
+ &num_channels);
+ if (ret) {
+ fprintf(stderr, "Problem reading scan element "
+ "information\n"
+ "diag %s\n", dev_dir_name);
+ goto error_disable_channels;
+ }
+ if (!num_channels) {
+ fprintf(stderr, "Still no channels after "
+ "auto-enabling, giving up\n");
+ goto error_disable_channels;
+ }
+ }
+
+ if (!num_channels && autochannels == AUTOCHANNELS_DISABLED) {
fprintf(stderr,
"No channels are enabled, we have nothing to scan.\n");
fprintf(stderr, "Enable channels manually in "
FORMAT_SCAN_ELEMENTS_DIR
- "/*_en and try again.\n", dev_dir_name);
+ "/*_en or pass -a to autoenable channels and "
+ "try again.\n", dev_dir_name);
ret = -ENOENT;
goto error_free_triggername;
}
@@ -479,7 +568,12 @@ error_free_channels:
error_free_triggername:
if (datardytrigger)
free(trigger_name);
-
+error_disable_channels:
+ if (autochannels == AUTOCHANNELS_ACTIVE) {
+ ret = enable_disable_all_channels(dev_dir_name, 0);
+ if (ret)
+ fprintf(stderr, "Failed to disable all channels\n");
+ }
error_free_dev_dir_name:
free(dev_dir_name);
diff --git a/tools/iio/iio_utils.h b/tools/iio/iio_utils.h
index e3503bfe538b..780f2014f8fa 100644
--- a/tools/iio/iio_utils.h
+++ b/tools/iio/iio_utils.h
@@ -52,6 +52,13 @@ struct iio_channel_info {
unsigned location;
};
+static inline int iioutils_check_suffix(const char *str, const char *suffix)
+{
+ return strlen(str) >= strlen(suffix) &&
+ strncmp(str+strlen(str)-strlen(suffix),
+ suffix, strlen(suffix)) == 0;
+}
+
int iioutils_break_up_name(const char *full_name, char **generic_name);
int iioutils_get_type(unsigned *is_signed, unsigned *bytes, unsigned *bits_used,
unsigned *shift, uint64_t *mask, unsigned *be,
--
2.4.3
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v3] iio: tools: generic_buffer: auto-enable channels
2016-04-14 8:26 [PATCH v3] iio: tools: generic_buffer: auto-enable channels Linus Walleij
@ 2016-04-17 11:31 ` Jonathan Cameron
0 siblings, 0 replies; 2+ messages in thread
From: Jonathan Cameron @ 2016-04-17 11:31 UTC (permalink / raw)
To: Linus Walleij, linux-iio; +Cc: Peter Meerwald-Stadler
On 14/04/16 09:26, Linus Walleij wrote:
> If no channels are enabled when we run generic_buffer on a
> device, add a command-line option to just enable all of them,
> run the sampling and disable them all again afterwards.
>
> This is extremely useful when I'm low-level testing my
> sensors with interrupts and triggers, sample session:
>
> root@Ux500:/ lsiio
> Device 000: lsm303dlh_accel
> Device 001: lis331dl_accel
> Device 002: l3g4200d
> Device 003: lsm303dlh_magn
> Device 004: lps001wp
> Trigger 000: lsm303dlh_accel-trigger
> Trigger 001: lis331dl_accel-trigger
> Trigger 002: l3g4200d-trigger
>
> root@Ux500:/ generic_buffer -a -c 10 -n l3g4200d
> iio device number being used is 2
> iio trigger number being used is 2
> No channels are enabled, enabling all channels
> Enabling: in_anglvel_x_en
> Enabling: in_anglvel_y_en
> Enabling: in_anglvel_z_en
> Enabling: in_timestamp_en
> /sys/bus/iio/devices/iio:device2 l3g4200d-trigger
> -3.593664 -0.713133 4.870143 946684863662292480
> 3.225546 0.867357 -4.945878 946684863671875000
> -0.676413 0.127296 0.106641 946684863681488037
> -0.661113 0.110160 0.128826 946684863690673828
> -0.664173 0.113067 0.123471 946684863700683593
> -0.664938 0.109395 0.124848 946684863710144042
> -0.664173 0.110619 0.130203 946684863719512939
> -0.666162 0.111231 0.132651 946684863729125976
> -0.668610 0.111690 0.130662 946684863738739013
> -0.660501 0.110466 0.131733 946684863748565673
> Disabling: in_anglvel_x_en
> Disabling: in_anglvel_y_en
> Disabling: in_anglvel_z_en
> Disabling: in_timestamp_en
>
> Pure awesomeness. If some channels have been enabled through
> scripts or manual interaction, nothing happens.
>
> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
> Acked-by: Daniel Baluta <daniel.baluta@intel.com>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Applied to the togreg branch of iio.git.
Very nice.
If Peter has any comments / acks etc, it'll be only
exposed as testing for a few more days at least so
feel free to send them in!
Jonathan
> ---
> ChangeLog v2->v3:
> - Use an enum for channel enablement state
> - Rename check_suffix() to iioutils_check_suffix()
> - Fix a bug in a corner case for the iioutils_check_suffix()
> function
> - Staticize the function enabling all channels
> - Restore helptext when no channels are enabled and
> autochannels are not enabled either: we should bail out
> with the error message like before
> ChangeLog v1->v2:
> - Provide for using the -a flag to indicate that you want all
> available channels enabled.
> ---
> tools/iio/generic_buffer.c | 102 +++++++++++++++++++++++++++++++++++++++++++--
> tools/iio/iio_utils.h | 7 ++++
> 2 files changed, 105 insertions(+), 4 deletions(-)
>
> diff --git a/tools/iio/generic_buffer.c b/tools/iio/generic_buffer.c
> index c42b7f836b48..2429c78de940 100644
> --- a/tools/iio/generic_buffer.c
> +++ b/tools/iio/generic_buffer.c
> @@ -35,6 +35,15 @@
> #include "iio_utils.h"
>
> /**
> + * enum autochan - state for the automatic channel enabling mechanism
> + */
> +enum autochan {
> + AUTOCHANNELS_DISABLED,
> + AUTOCHANNELS_ENABLED,
> + AUTOCHANNELS_ACTIVE,
> +};
> +
> +/**
> * size_from_channelarray() - calculate the storage size of a scan
> * @channels: the channel info array
> * @num_channels: number of channels
> @@ -191,10 +200,51 @@ void process_scan(char *data,
> printf("\n");
> }
>
> +static int enable_disable_all_channels(char *dev_dir_name, int enable)
> +{
> + const struct dirent *ent;
> + char scanelemdir[256];
> + DIR *dp;
> + int ret;
> +
> + snprintf(scanelemdir, sizeof(scanelemdir),
> + FORMAT_SCAN_ELEMENTS_DIR, dev_dir_name);
> + scanelemdir[sizeof(scanelemdir)-1] = '\0';
> +
> + dp = opendir(scanelemdir);
> + if (!dp) {
> + fprintf(stderr, "Enabling/disabling channels: can't open %s\n",
> + scanelemdir);
> + return -EIO;
> + }
> +
> + ret = -ENOENT;
> + while (ent = readdir(dp), ent) {
> + if (iioutils_check_suffix(ent->d_name, "_en")) {
> + printf("%sabling: %s\n",
> + enable ? "En" : "Dis",
> + ent->d_name);
> + ret = write_sysfs_int(ent->d_name, scanelemdir,
> + enable);
> + if (ret < 0)
> + fprintf(stderr, "Failed to enable/disable %s\n",
> + ent->d_name);
> + }
> + }
> +
> + if (closedir(dp) == -1) {
> + perror("Enabling/disabling channels: "
> + "Failed to close directory");
> + return -errno;
> + }
> + return 0;
> +}
> +
> void print_usage(void)
> {
> fprintf(stderr, "Usage: generic_buffer [options]...\n"
> "Capture, convert and output data from IIO device buffer\n"
> + " -a Auto-activate all available channels\n"
> " -c <n> Do n conversions\n"
> " -e Disable wait for event (new data)\n"
> " -g Use trigger-less mode\n"
> @@ -225,12 +275,16 @@ int main(int argc, char **argv)
> int scan_size;
> int noevents = 0;
> int notrigger = 0;
> + enum autochan autochannels = AUTOCHANNELS_DISABLED;
> char *dummy;
>
> struct iio_channel_info *channels;
>
> - while ((c = getopt(argc, argv, "c:egl:n:t:w:")) != -1) {
> + while ((c = getopt(argc, argv, "ac:egl:n:t:w:")) != -1) {
> switch (c) {
> + case 'a':
> + autochannels = AUTOCHANNELS_ENABLED;
> + break;
> case 'c':
> errno = 0;
> num_loops = strtoul(optarg, &dummy, 10);
> @@ -340,12 +394,47 @@ int main(int argc, char **argv)
> "diag %s\n", dev_dir_name);
> goto error_free_triggername;
> }
> - if (!num_channels) {
> + if (num_channels && autochannels == AUTOCHANNELS_ENABLED) {
> + fprintf(stderr, "Auto-channels selected but some channels "
> + "are already activated in sysfs\n");
> + fprintf(stderr, "Proceeding without activating any channels\n");
> + }
> +
> + if (!num_channels && autochannels == AUTOCHANNELS_ENABLED) {
> + fprintf(stderr,
> + "No channels are enabled, enabling all channels\n");
> +
> + ret = enable_disable_all_channels(dev_dir_name, 1);
> + if (ret) {
> + fprintf(stderr, "Failed to enable all channels\n");
> + goto error_free_triggername;
> + }
> +
> + /* This flags that we need to disable the channels again */
> + autochannels = AUTOCHANNELS_ACTIVE;
> +
> + ret = build_channel_array(dev_dir_name, &channels,
> + &num_channels);
> + if (ret) {
> + fprintf(stderr, "Problem reading scan element "
> + "information\n"
> + "diag %s\n", dev_dir_name);
> + goto error_disable_channels;
> + }
> + if (!num_channels) {
> + fprintf(stderr, "Still no channels after "
> + "auto-enabling, giving up\n");
> + goto error_disable_channels;
> + }
> + }
> +
> + if (!num_channels && autochannels == AUTOCHANNELS_DISABLED) {
> fprintf(stderr,
> "No channels are enabled, we have nothing to scan.\n");
> fprintf(stderr, "Enable channels manually in "
> FORMAT_SCAN_ELEMENTS_DIR
> - "/*_en and try again.\n", dev_dir_name);
> + "/*_en or pass -a to autoenable channels and "
> + "try again.\n", dev_dir_name);
> ret = -ENOENT;
> goto error_free_triggername;
> }
> @@ -479,7 +568,12 @@ error_free_channels:
> error_free_triggername:
> if (datardytrigger)
> free(trigger_name);
> -
> +error_disable_channels:
> + if (autochannels == AUTOCHANNELS_ACTIVE) {
> + ret = enable_disable_all_channels(dev_dir_name, 0);
> + if (ret)
> + fprintf(stderr, "Failed to disable all channels\n");
> + }
> error_free_dev_dir_name:
> free(dev_dir_name);
>
> diff --git a/tools/iio/iio_utils.h b/tools/iio/iio_utils.h
> index e3503bfe538b..780f2014f8fa 100644
> --- a/tools/iio/iio_utils.h
> +++ b/tools/iio/iio_utils.h
> @@ -52,6 +52,13 @@ struct iio_channel_info {
> unsigned location;
> };
>
> +static inline int iioutils_check_suffix(const char *str, const char *suffix)
> +{
> + return strlen(str) >= strlen(suffix) &&
> + strncmp(str+strlen(str)-strlen(suffix),
> + suffix, strlen(suffix)) == 0;
> +}
> +
> int iioutils_break_up_name(const char *full_name, char **generic_name);
> int iioutils_get_type(unsigned *is_signed, unsigned *bytes, unsigned *bits_used,
> unsigned *shift, uint64_t *mask, unsigned *be,
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2016-04-17 11:31 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-04-14 8:26 [PATCH v3] iio: tools: generic_buffer: auto-enable channels Linus Walleij
2016-04-17 11:31 ` Jonathan Cameron
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.