From mboxrd@z Thu Jan 1 00:00:00 1970 From: Vignesh R Date: Tue, 10 May 2016 12:22:15 +0530 Subject: [U-Boot] [PATCH 0/4] Add support for Cadence QSPI on K2G In-Reply-To: References: <1460544768-32750-1-git-send-email-vigneshr@ti.com> Message-ID: <5731851F.60005@ti.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi, On 05/09/2016 08:04 PM, Jagan Teki wrote: > On 13 April 2016 at 16:22, Vignesh R wrote: >> >> This series adds support for Cadence QSPI controller present on K2G SoC. >> >> The first patch extends AHB address to 32 bit as K2G has 32 bit AHB >> address. Second patch enable QUAD mode based on DT data instead of >> relying on config option. And last to patches add DT node and add >> configs to enable the driver. >> >> Depends on [1] to enable SPI driver model support on K2G and [2] to >> support different bus frequencies for two different SPI controllers >> present on K2G EVM. >> >> [1]https://www.mail-archive.com/u-boot at lists.denx.de/msg209556.html >> [2]https://patchwork.ozlabs.org/patch/609947/ >> >> Vignesh R (4): >> spi: cadence_qspi_apb: Support 32 bit AHB address >> spi: cadence_quadspi: Enable QUAD mode based on DT data >> ARM: dts: K2G: Add support for QSPI controller > > Please rebase this? This series applies cleanly on current u-boot master provided dts changes from my earlier patch series [3] are picked up. [3] is required to support SPI DM on K2G. Could you please pick up the dependent series and then apply this? [3] https://www.mail-archive.com/u-boot at lists.denx.de/msg211787.html (Convert davinci_spi to DM patch series) > >> defconfig: k2g_evm_defconfig: Enable Cadence QSPI controller > > Reviewed-by: Jagan Teki > -- Regards Vignesh