From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marek Vasut Date: Fri, 20 May 2016 13:59:07 +0200 Subject: [U-Boot] [PATCH] net: Add ag7xxx driver for Atheros MIPS In-Reply-To: References: <1462476853-7317-1-git-send-email-marex@denx.de> <572F37DE.1060403@gmail.com> <572F59A1.4030108@denx.de> Message-ID: <573EFC0B.1080000@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 05/20/2016 06:18 AM, Wills Wang wrote: > > > On 05/08/2016 11:22 PM, Marek Vasut wrote: >> On 05/08/2016 02:58 PM, Daniel Schwierzeck wrote: >> >> Hi! >> >>> Am 05.05.2016 um 21:34 schrieb Marek Vasut: >>>> Add ethernet driver for the AR933x and AR934x Atheros MIPS machines. >>>> The driver could be easily extended to other WiSoCs. > How to make this patch work on ar933x board? > I apply this patch on the top of mips/next branch and enable this option > in menuconfig, > but i can't see any boot information for Ethernet. The Kconfig conversion is not complete. See the tplink_wdr4300_defconfig for the necessary options, it should be at least these: CONFIG_CMD_NET=y CONFIG_CMD_NFS=y CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM_ETH=y CONFIG_AG7XXX=y > By the way, the DT node "compatible" in driver is different from > arch/mips/dts/ar933x.dtsi OK, tweak that one to "qca,ag933x-mac" in the DTS. , and > the following compiling error occur because of commit > 4feefdcfe916113ac6e1837ea22857f25fe1771c: Enable CONFIG_CLK=y in your defconfig . > drivers/usb/host/built-in.o: In function `ehci_usb_probe': > drivers/usb/host/ehci-generic.c:(.text.ehci_usb_probe+0x40): undefined > reference to `clk_get_by_index' > drivers/usb/host/ehci-generic.c:(.text.ehci_usb_probe+0x4c): undefined > reference to `clk_get_by_index' > drivers/usb/host/ehci-generic.c:(.text.ehci_usb_probe+0x60): undefined > reference to `clk_enable' > drivers/usb/host/ehci-generic.c:(.text.ehci_usb_probe+0x68): undefined > reference to `clk_enable' > -- Best regards, Marek Vasut