[PATCH 0/8] x86/time: improve cross-CPU clock monotonicity (and more)

["Jan Beulich" <JBeulich@suse.com>]

1: x86/time: adjust local system time initialization
2: x86: also generate assembler usable equates for synthesized features
3: x86/time: introduce and use rdtsc_ordered()
4: x86/time: calibrate TSC against platform timer
5: x86/time: correctly honor late clearing of TSC related feature flags
6: x86/time: support 32-bit wide ACPI PM timer
7: x86/time: fold recurring code
8: x86/time: group time stamps into a structure

The first patch was submitted on its own before; I'd like it to be
looked at in the context of this entire series though, and hence I'm
including it here again.

Expectations towards the improvements of what is now patch 4
didn't get fulfilled (it brought down the skew only be a factor of
two in my measurements), but to "level" that improvements by
patch 3 were significantly larger than expected (hence the two
got switched in order, albeit I can't say whether the improvements
by 3 would also be as prominent without patch 4, as I simply never
measured 3 alone): I've observed the TSC value read without the
ordering fence to be up to several hundred clocks off compared to
the fenced variant.

I'd like to note though that even with the full series in place I'm
still seeing some skew, and measurement over about 24h suggests
that what is left now is actually increasing over time (which
obviously is bad). What looks particularly odd to me is that over
longer periods of time maximum skew between hyperthreads
stays relatively stable on a certain core, but eventually another
core may "overtake"). So far I did not have a good idea of what
might be causing this (short of suspecting constant TSC not really
being all that constant).

Another observed oddity is that with this debugging code

@@ -1259,6 +1327,14 @@ time_calibration_rendezvous_tail(const s
     c->local_tsc    = rdtsc_ordered();
     c->local_stime  = get_s_time_fixed(c->local_tsc);
     c->master_stime = r->master_stime;
+{//temp
+ s64 delta = rdtsc_ordered() - c->local_tsc;
+ static s64 delta_max = 100;
+ if(delta > delta_max) {
+  delta_max = delta;
+  printk("CPU%02u: delta=%ld\n", smp_processor_id(), delta);
+ }
+}
 
     raise_softirq(TIME_CALIBRATE_SOFTIRQ);
 }

added on top of the series deltas of beyond 20,000 get logged.
Afaict (I admit I didn't check) interrupts are off here, so I can't
see where such spikes would result from. Is a watchdog NMI a
possible explanation for this? If so, what other bad effects on
time calculations might result from such events? And how would
one explain spikes of both around 13,000 and 22,000 with this
(I'd expect individual watchdog NMIs to always take about the
same time)?

Signed-off-by: Jan Beulich <jbeulich@suse.com>


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel