[U-Boot] [PULL] Please pull u-boot-imx

[Stefano Babic <sbabic@denx.de>]

Hi Tom,

I have seen that this was not yet pulled. I added just a few of fixes
and I send a new PR.

Regards,
Stefano


On 07/06/2016 18:44, Stefano Babic wrote:
> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit d7d000311285e4b8d11e089ca13ea456a01be3b8:
> 
>   Merge branch 'master' of git://git.denx.de/u-boot-mips (2016-05-23
> 11:51:37 -0400)
> 
> are available in the git repository at:
> 
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to d2ba7a6adcef6e6f8c4418c7b0caf9d7ab98a6d4:
> 
>   arm: mxs: Remove misleading comments (2016-06-07 18:23:51 +0200)
> 
> ----------------------------------------------------------------
> Andrew Shadura (6):
>       board: ge: bx50v3: don't configure the backlight when there's no
> display
>       board: ge: bx50v3: make CONFIG_VIDEO optional and disabled by default
>       board: ge: bx50v3: make USB support optional and disabled by default
>       board: ge: bx50v3: make network support optional and disabled by
> default
>       board: ge: bx50v3: make SATA optional and disabled by default
>       board: ge: bx50v3: disable unused features to improve size and
> boot speed
> 
> Damien Riegel (1):
>       ts4800: update environment to boot with device tree
> 
> Kimmo Surakka (1):
>       board: ge: bx50v3: add missing partnum variable
> 
> Michael Heimpold (1):
>       arm: mxs: Remove misleading comments
> 
> Peng Fan (18):
>       imx: correct speed grading info for i.MX6UL
>       imx-common: introduce simpler macros for runtime dection
>       imx: mx6: support i.MX6SOLO when enable/disable_ldb_di_clock_sources
>       imx: mx6: use simpler runtime cpu dection macros
>       imx-common: hab: support i.MX6SOLO
>       imx-common: use simpler runtime cpu dection macros
>       imx: mx6: ddr: support i.MX6D/QPlus
>       imx: mx6: correct get_cpu_speed_grade_hz for i.MX6DQP
>       imx-common: hab: support i.MX6DQPlus
>       imx-common: sata: return failure if not i.MX6DQPlus
>       imx-common: timer: support i.MX6DQPlus
>       mtd: nand: mxs: use simpler runtime cpu dection macros
>       ocotp: mxc: use simpler runtime cpu dection macros
>       net: fec_mxc: use simpler runtime cpu dection macros
>       block: dwc_ahsata: support i.MX6DQPlus
>       board: mx6sabresd/auto: use simpler runtime cpu dection macros
>       imx: mx6qsabreauto: drop duplicated net phy configuration
>       imx: mx7: implement reset_misc
> 
> Sebastien Bourdelin (2):
>       ts4800: add CONFIG_SYS_FSL_ERRATUM_ESDHC_A001
>       cosmetic: mx6slevk: Minor coding-style fix
> 
> Stefano Babic (1):
>       Merge branch 'master' of git://git.denx.de/u-boot
> 
> Tim Harvey (22):
>       imx: ventana: config: remove redundant config
>       imx: ventana: gsc: remove dependence on env
>       imx: ventana: use EEPROM register for falcon boot mode
>       imx: ventana: remove SPL_EXT_SUPPORT
>       imx: ventana: config: add env vars for disk and part
>       imx: ventana: config: add fixfdt script to apply manual fdt fixups
>       imx: ventana: config: use bootdir env var for directory of fdt files
>       imx: ventana: config: use fs env var for block dev filesystem type
>       imx: ventana: config: use explicit addr in loadscript
>       imx: ventana: config: add PREBOOT support
>       imx: ventana: SPL: only disable boot watchdog if Falcon mode
>       imx: ventana: SPL: added support for 32bit IMX6DQ 8Gb density DRAM
> config
>       imx: ventana: gsc: add gsc sleep command
>       imx: ventana: gsc: fix negative temperature readings
>       imx: ventana: gsc: show board temp on boot
>       imx: ventana: export backlight gpio after gpio driver is available
>       imx: ventana: fix invalid dio configuration for pwm mode
>       imx: ventana: enable pwm device-tree property based on hwconfig
>       imx: ventana: remove dependence on EECONFIG_SATA eeprom feature bit
>       imx: ventana: remove several EEPROM config bit dependence
>       imx: ventana: add GW553x support
>       imx: ventana: add fdt fixup to enable UHS-I support on selected boards
> 
>  arch/arm/cpu/arm926ejs/mxs/mxs.c              |   4 ++--
>  arch/arm/cpu/armv7/mx6/clock.c                |  42
> ++++++++++++++++------------------
>  arch/arm/cpu/armv7/mx6/ddr.c                  |  10 ++++----
>  arch/arm/cpu/armv7/mx6/soc.c                  |  26 ++++++++++++++++-----
>  arch/arm/cpu/armv7/mx7/soc.c                  |   8 +++++++
>  arch/arm/imx-common/hab.c                     |  53
> +++++++++++++++++++-----------------------
>  arch/arm/imx-common/init.c                    |   5 ++--
>  arch/arm/imx-common/iomux-v3.c                |   2 +-
>  arch/arm/imx-common/sata.c                    |   2 +-
>  arch/arm/imx-common/timer.c                   |  11 +++------
>  arch/arm/include/asm/imx-common/sys_proto.h   |   8 +++++++
>  board/freescale/mx6qsabreauto/mx6qsabreauto.c |  37
> ++----------------------------
>  board/freescale/mx6sabresd/mx6sabresd.c       |   4 ++--
>  board/freescale/mx6slevk/mx6slevk.c           |  16 ++++++-------
>  board/gateworks/gw_ventana/README             |  17 +++++---------
>  board/gateworks/gw_ventana/common.c           | 100
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++----------
>  board/gateworks/gw_ventana/common.h           |   3 +++
>  board/gateworks/gw_ventana/eeprom.c           |  34
> +++------------------------
>  board/gateworks/gw_ventana/gsc.c              |  61
> +++++++++++++++++++++++++++++++++++++++++++++----
>  board/gateworks/gw_ventana/gw_ventana.c       |  69
> ++++++++++++++++++++++++++++++++++++++++++++++++++-----
>  board/gateworks/gw_ventana/gw_ventana_spl.c   |  45
> ++++++++++++++++++++++++++++++++----
>  board/gateworks/gw_ventana/ventana_eeprom.h   |   1 +
>  board/ge/bx50v3/bx50v3.c                      |   3 +++
>  configs/ge_b450v3_defconfig                   |  12 +++++-----
>  configs/ge_b650v3_defconfig                   |  12 +++++-----
>  configs/ge_b850v3_defconfig                   |  12 +++++-----
>  drivers/block/dwc_ahsata.c                    |   2 +-
>  drivers/misc/mxc_ocotp.c                      |   4 ++--
>  drivers/mtd/nand/mxs_nand.c                   |   2 +-
>  drivers/net/fec_mxc.c                         |   2 +-
>  include/configs/ge_bx50v3.h                   |  41
> ++++++++++++++++++++++-----------
>  include/configs/gw_ventana.h                  |  42
> ++++++++++++++++++++--------------
>  include/configs/ts4800.h                      |  19 ++++++++++++----
>  33 files changed, 459 insertions(+), 250 deletions(-)
> 


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================