All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v1 0/2] enable display on stm32mp157c-dk1 board
@ 2019-03-29 12:43 ` Yannick Fertré
  0 siblings, 0 replies; 11+ messages in thread
From: Yannick Fertré @ 2019-03-29 12:43 UTC (permalink / raw)
  To: Maxime Coquelin, Alexandre Torgue, Rob Herring, Mark Rutland,
	linux-stm32, linux-arm-kernel, devicetree, linux-kernel,
	Benjamin Gaignard, Yannick Fertre, Philippe Cornu,
	Fabrice Gasnier

Enable display on stm32mp157c-dk1 board. I2c node must be created first.

Yannick Fertré (2):
  ARM: dts: stm32: Add I2C 1 and 4 config for stm32mp157a-dk1
  ARM: dts: stm32: enable display on stm32mp157c-dk1 board

 arch/arm/boot/dts/stm32mp157a-dk1.dts | 78 +++++++++++++++++++++++++++++++++++
 1 file changed, 78 insertions(+)

--
2.7.4


^ permalink raw reply	[flat|nested] 11+ messages in thread
* [PATCH v1 0/2] enable display on stm32mp157c-dk1 board
@ 2019-03-29 12:43 ` Yannick Fertré
  0 siblings, 0 replies; 11+ messages in thread
From: Yannick Fertré @ 2019-03-29 12:43 UTC (permalink / raw)
  To: Maxime Coquelin, Alexandre Torgue, Rob Herring, Mark Rutland,
	linux-stm32, linux-arm-kernel, devicetree, linux-kernel,
	Benjamin Gaignard, Yannick Fertre, Philippe Cornu,
	Fabrice Gasnier

Enable display on stm32mp157c-dk1 board. I2c node must be created first.

Yannick Fertré (2):
  ARM: dts: stm32: Add I2C 1 and 4 config for stm32mp157a-dk1
  ARM: dts: stm32: enable display on stm32mp157c-dk1 board

 arch/arm/boot/dts/stm32mp157a-dk1.dts | 78 +++++++++++++++++++++++++++++++++++
 1 file changed, 78 insertions(+)

--
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 11+ messages in thread
* [PATCH v1 0/2] enable display on stm32mp157c-dk1 board
@ 2019-03-29 12:43 ` Yannick Fertré
  0 siblings, 0 replies; 11+ messages in thread
From: Yannick Fertré @ 2019-03-29 12:43 UTC (permalink / raw)
  To: Maxime Coquelin, Alexandre Torgue, Rob Herring, Mark Rutland,
	linux-stm32, linux-arm-kernel, devicetree, linux-kernel,
	Benjamin Gaignard, Yannick Fertre, Philippe Cornu,
	Fabrice Gasnier

Enable display on stm32mp157c-dk1 board. I2c node must be created first.

Yannick Fertré (2):
  ARM: dts: stm32: Add I2C 1 and 4 config for stm32mp157a-dk1
  ARM: dts: stm32: enable display on stm32mp157c-dk1 board

 arch/arm/boot/dts/stm32mp157a-dk1.dts | 78 +++++++++++++++++++++++++++++++++++
 1 file changed, 78 insertions(+)

--
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 11+ messages in thread
* [PATCH v1 1/2] ARM: dts: stm32: Add I2C 1 and 4 config for stm32mp157a-dk1
  2019-03-29 12:43 ` Yannick Fertré
  (?)
@ 2019-03-29 12:43   ` Yannick Fertré
  -1 siblings, 0 replies; 11+ messages in thread
From: Yannick Fertré @ 2019-03-29 12:43 UTC (permalink / raw)
  To: Maxime Coquelin, Alexandre Torgue, Rob Herring, Mark Rutland,
	linux-stm32, linux-arm-kernel, devicetree, linux-kernel,
	Benjamin Gaignard, Yannick Fertre, Philippe Cornu,
	Fabrice Gasnier

Append I2C 1 and 4 instances for stm32mp157c-dk1

Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
---
 arch/arm/boot/dts/stm32mp157a-dk1.dts | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts
index 1b1886d..696a533 100644
--- a/arch/arm/boot/dts/stm32mp157a-dk1.dts
+++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts
@@ -65,6 +65,28 @@
 	};
 };

+&i2c1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c1_pins_a>;
+	pinctrl-1 = <&i2c1_pins_sleep_a>;
+	i2c-scl-rising-time-ns = <100>;
+	i2c-scl-falling-time-ns = <7>;
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&i2c4 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c4_pins_a>;
+	pinctrl-1 = <&i2c4_pins_sleep_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
 &ipcc {
 	status = "okay";
 };
--
2.7.4


^ permalink raw reply related	[flat|nested] 11+ messages in thread
* [PATCH v1 1/2] ARM: dts: stm32: Add I2C 1 and 4 config for stm32mp157a-dk1
@ 2019-03-29 12:43   ` Yannick Fertré
  0 siblings, 0 replies; 11+ messages in thread
From: Yannick Fertré @ 2019-03-29 12:43 UTC (permalink / raw)
  To: Maxime Coquelin, Alexandre Torgue, Rob Herring, Mark Rutland,
	linux-stm32, linux-arm-kernel, devicetree, linux-kernel,
	Benjamin Gaignard, Yannick Fertre, Philippe Cornu,
	Fabrice Gasnier

Append I2C 1 and 4 instances for stm32mp157c-dk1

Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
---
 arch/arm/boot/dts/stm32mp157a-dk1.dts | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts
index 1b1886d..696a533 100644
--- a/arch/arm/boot/dts/stm32mp157a-dk1.dts
+++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts
@@ -65,6 +65,28 @@
 	};
 };

+&i2c1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c1_pins_a>;
+	pinctrl-1 = <&i2c1_pins_sleep_a>;
+	i2c-scl-rising-time-ns = <100>;
+	i2c-scl-falling-time-ns = <7>;
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&i2c4 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c4_pins_a>;
+	pinctrl-1 = <&i2c4_pins_sleep_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
 &ipcc {
 	status = "okay";
 };
--
2.7.4

^ permalink raw reply related	[flat|nested] 11+ messages in thread
* [PATCH v1 1/2] ARM: dts: stm32: Add I2C 1 and 4 config for stm32mp157a-dk1
@ 2019-03-29 12:43   ` Yannick Fertré
  0 siblings, 0 replies; 11+ messages in thread
From: Yannick Fertré @ 2019-03-29 12:43 UTC (permalink / raw)
  To: Maxime Coquelin, Alexandre Torgue, Rob Herring, Mark Rutland,
	linux-stm32, linux-arm-kernel, devicetree, linux-kernel,
	Benjamin Gaignard, Yannick Fertre, Philippe Cornu,
	Fabrice Gasnier

Append I2C 1 and 4 instances for stm32mp157c-dk1

Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
---
 arch/arm/boot/dts/stm32mp157a-dk1.dts | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts
index 1b1886d..696a533 100644
--- a/arch/arm/boot/dts/stm32mp157a-dk1.dts
+++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts
@@ -65,6 +65,28 @@
 	};
 };

+&i2c1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c1_pins_a>;
+	pinctrl-1 = <&i2c1_pins_sleep_a>;
+	i2c-scl-rising-time-ns = <100>;
+	i2c-scl-falling-time-ns = <7>;
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&i2c4 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c4_pins_a>;
+	pinctrl-1 = <&i2c4_pins_sleep_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
 &ipcc {
 	status = "okay";
 };
--
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 11+ messages in thread
* [PATCH v1 2/2] ARM: dts: stm32: enable display on stm32mp157c-dk1 board
  2019-03-29 12:43 ` Yannick Fertré
  (?)
@ 2019-03-29 12:43   ` Yannick Fertré
  -1 siblings, 0 replies; 11+ messages in thread
From: Yannick Fertré @ 2019-03-29 12:43 UTC (permalink / raw)
  To: Maxime Coquelin, Alexandre Torgue, Rob Herring, Mark Rutland,
	linux-stm32, linux-arm-kernel, devicetree, linux-kernel,
	Benjamin Gaignard, Yannick Fertre, Philippe Cornu,
	Fabrice Gasnier

Enable hdmi bridge sii9022 & display controller.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
---
 arch/arm/boot/dts/stm32mp157a-dk1.dts | 56 +++++++++++++++++++++++++++++++++++
 1 file changed, 56 insertions(+)

diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts
index 696a533..f483600 100644
--- a/arch/arm/boot/dts/stm32mp157a-dk1.dts
+++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts
@@ -37,6 +37,14 @@
 		};
 	};
 
+	v1v2_hdmi: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "v3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
 	v3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "v3v3";
@@ -44,6 +52,14 @@
 		regulator-max-microvolt = <3300000>;
 		regulator-always-on;
 	};
+
+	v3v3_hdmi: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "v3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 };
 
 &ethernet0 {
@@ -74,6 +90,32 @@
 	status = "okay";
 	/delete-property/dmas;
 	/delete-property/dma-names;
+
+	hdmi-transmitter@39 {
+		compatible = "sil,sii9022";
+		reg = <0x39>;
+		iovcc-supply = <&v3v3_hdmi>;
+		cvcc12-supply = <&v1v2_hdmi>;
+		reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-parent = <&gpiog>;
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&ltdc_pins_a>;
+		pinctrl-1 = <&ltdc_pins_sleep_a>;
+		status = "okay";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				sii9022_in: endpoint {
+					remote-endpoint = <&ltdc_ep0_out>;
+				};
+			};
+		};
+	};
 };
 
 &i2c4 {
@@ -96,6 +138,20 @@
 	status = "okay";
 };
 
+&ltdc {
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ltdc_ep0_out: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&sii9022_in>;
+		};
+	};
+};
+
 &rng1 {
 	status = "okay";
 };
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 11+ messages in thread
* [PATCH v1 2/2] ARM: dts: stm32: enable display on stm32mp157c-dk1 board
@ 2019-03-29 12:43   ` Yannick Fertré
  0 siblings, 0 replies; 11+ messages in thread
From: Yannick Fertré @ 2019-03-29 12:43 UTC (permalink / raw)
  To: Maxime Coquelin, Alexandre Torgue, Rob Herring, Mark Rutland,
	linux-stm32, linux-arm-kernel, devicetree, linux-kernel,
	Benjamin Gaignard, Yannick Fertre, Philippe Cornu,
	Fabrice Gasnier

Enable hdmi bridge sii9022 & display controller.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
---
 arch/arm/boot/dts/stm32mp157a-dk1.dts | 56 +++++++++++++++++++++++++++++++++++
 1 file changed, 56 insertions(+)

diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts
index 696a533..f483600 100644
--- a/arch/arm/boot/dts/stm32mp157a-dk1.dts
+++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts
@@ -37,6 +37,14 @@
 		};
 	};
 
+	v1v2_hdmi: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "v3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
 	v3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "v3v3";
@@ -44,6 +52,14 @@
 		regulator-max-microvolt = <3300000>;
 		regulator-always-on;
 	};
+
+	v3v3_hdmi: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "v3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 };
 
 &ethernet0 {
@@ -74,6 +90,32 @@
 	status = "okay";
 	/delete-property/dmas;
 	/delete-property/dma-names;
+
+	hdmi-transmitter@39 {
+		compatible = "sil,sii9022";
+		reg = <0x39>;
+		iovcc-supply = <&v3v3_hdmi>;
+		cvcc12-supply = <&v1v2_hdmi>;
+		reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-parent = <&gpiog>;
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&ltdc_pins_a>;
+		pinctrl-1 = <&ltdc_pins_sleep_a>;
+		status = "okay";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				sii9022_in: endpoint {
+					remote-endpoint = <&ltdc_ep0_out>;
+				};
+			};
+		};
+	};
 };
 
 &i2c4 {
@@ -96,6 +138,20 @@
 	status = "okay";
 };
 
+&ltdc {
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ltdc_ep0_out: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&sii9022_in>;
+		};
+	};
+};
+
 &rng1 {
 	status = "okay";
 };
-- 
2.7.4

^ permalink raw reply related	[flat|nested] 11+ messages in thread
* [PATCH v1 2/2] ARM: dts: stm32: enable display on stm32mp157c-dk1 board
@ 2019-03-29 12:43   ` Yannick Fertré
  0 siblings, 0 replies; 11+ messages in thread
From: Yannick Fertré @ 2019-03-29 12:43 UTC (permalink / raw)
  To: Maxime Coquelin, Alexandre Torgue, Rob Herring, Mark Rutland,
	linux-stm32, linux-arm-kernel, devicetree, linux-kernel,
	Benjamin Gaignard, Yannick Fertre, Philippe Cornu,
	Fabrice Gasnier

Enable hdmi bridge sii9022 & display controller.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
---
 arch/arm/boot/dts/stm32mp157a-dk1.dts | 56 +++++++++++++++++++++++++++++++++++
 1 file changed, 56 insertions(+)

diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts
index 696a533..f483600 100644
--- a/arch/arm/boot/dts/stm32mp157a-dk1.dts
+++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts
@@ -37,6 +37,14 @@
 		};
 	};
 
+	v1v2_hdmi: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "v3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
 	v3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "v3v3";
@@ -44,6 +52,14 @@
 		regulator-max-microvolt = <3300000>;
 		regulator-always-on;
 	};
+
+	v3v3_hdmi: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "v3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 };
 
 &ethernet0 {
@@ -74,6 +90,32 @@
 	status = "okay";
 	/delete-property/dmas;
 	/delete-property/dma-names;
+
+	hdmi-transmitter@39 {
+		compatible = "sil,sii9022";
+		reg = <0x39>;
+		iovcc-supply = <&v3v3_hdmi>;
+		cvcc12-supply = <&v1v2_hdmi>;
+		reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-parent = <&gpiog>;
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&ltdc_pins_a>;
+		pinctrl-1 = <&ltdc_pins_sleep_a>;
+		status = "okay";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				sii9022_in: endpoint {
+					remote-endpoint = <&ltdc_ep0_out>;
+				};
+			};
+		};
+	};
 };
 
 &i2c4 {
@@ -96,6 +138,20 @@
 	status = "okay";
 };
 
+&ltdc {
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ltdc_ep0_out: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&sii9022_in>;
+		};
+	};
+};
+
 &rng1 {
 	status = "okay";
 };
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 11+ messages in thread
* Re: [PATCH v1 0/2] enable display on stm32mp157c-dk1 board
  2019-03-29 12:43 ` Yannick Fertré
@ 2019-05-21 10:22   ` Alexandre Torgue
  -1 siblings, 0 replies; 11+ messages in thread
From: Alexandre Torgue @ 2019-05-21 10:22 UTC (permalink / raw)
  To: Yannick Fertré,
	Maxime Coquelin, Rob Herring, Mark Rutland, linux-stm32,
	linux-arm-kernel, devicetree, linux-kernel, Benjamin Gaignard,
	Philippe Cornu, Fabrice Gasnier

Hi Yannick

On 3/29/19 1:43 PM, Yannick Fertré wrote:
> Enable display on stm32mp157c-dk1 board. I2c node must be created first.
> 
> Yannick Fertré (2):
>    ARM: dts: stm32: Add I2C 1 and 4 config for stm32mp157a-dk1
>    ARM: dts: stm32: enable display on stm32mp157c-dk1 board
> 
>   arch/arm/boot/dts/stm32mp157a-dk1.dts | 78 +++++++++++++++++++++++++++++++++++
>   1 file changed, 78 insertions(+)
> 
> --
> 2.7.4
> 

Series applied on stm32-next.

Regards
Alex

^ permalink raw reply	[flat|nested] 11+ messages in thread
* Re: [PATCH v1 0/2] enable display on stm32mp157c-dk1 board
@ 2019-05-21 10:22   ` Alexandre Torgue
  0 siblings, 0 replies; 11+ messages in thread
From: Alexandre Torgue @ 2019-05-21 10:22 UTC (permalink / raw)
  To: Yannick Fertré,
	Maxime Coquelin, Rob Herring, Mark Rutland, linux-stm32,
	linux-arm-kernel, devicetree, linux-kernel, Benjamin Gaignard,
	Philippe Cornu, Fabrice Gasnier

Hi Yannick

On 3/29/19 1:43 PM, Yannick Fertré wrote:
> Enable display on stm32mp157c-dk1 board. I2c node must be created first.
> 
> Yannick Fertré (2):
>    ARM: dts: stm32: Add I2C 1 and 4 config for stm32mp157a-dk1
>    ARM: dts: stm32: enable display on stm32mp157c-dk1 board
> 
>   arch/arm/boot/dts/stm32mp157a-dk1.dts | 78 +++++++++++++++++++++++++++++++++++
>   1 file changed, 78 insertions(+)
> 
> --
> 2.7.4
> 

Series applied on stm32-next.

Regards
Alex

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 11+ messages in thread
end of thread, other threads:[~2019-05-21 10:22 UTC | newest]

Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-03-29 12:43 [PATCH v1 0/2] enable display on stm32mp157c-dk1 board Yannick Fertré
2019-03-29 12:43 ` Yannick Fertré
2019-03-29 12:43 ` Yannick Fertré
2019-03-29 12:43 ` [PATCH v1 1/2] ARM: dts: stm32: Add I2C 1 and 4 config for stm32mp157a-dk1 Yannick Fertré
2019-03-29 12:43   ` Yannick Fertré
2019-03-29 12:43   ` Yannick Fertré
2019-03-29 12:43 ` [PATCH v1 2/2] ARM: dts: stm32: enable display on stm32mp157c-dk1 board Yannick Fertré
2019-03-29 12:43   ` Yannick Fertré
2019-03-29 12:43   ` Yannick Fertré
2019-05-21 10:22 ` [PATCH v1 0/2] " Alexandre Torgue
2019-05-21 10:22   ` Alexandre Torgue

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.