All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lukas Redlinger <lukas.redlinger@agilox.net>
To: "linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>
Subject: [BUG] regular scan timed out
Date: Thu, 7 Feb 2019 16:04:53 +0100	[thread overview]
Message-ID: <588b2e78-a2f1-49f7-4a15-baa4f8658cc1@agilox.net> (raw)

Hi there,

Debian 10 testing, Intel 8265, firmware 36.9f0a2d68.0

2 interfaces on 1 phy: 1 managed, 1 AP

background scan configured: bgscan="simple:1:-70:900"

------------

phy#0
     Interface hotspot
         ifindex 11
         wdev 0x4
         addr a0:a4:c5:96:b5:ec
         ssid yyyyyy
         type AP
         channel 1 (2412 MHz), width: 20 MHz (no HT), center1: 2412 MHz
         txpower 22.00 dBm

     Unnamed/non-netdev interface
         wdev 0x2
         addr a0:a4:c5:96:b5:eb
         type P2P-device
         txpower 0.00 dBm

     Interface wlp1s0
         ifindex 7
         wdev 0x1
         addr a0:a4:c5:96:b5:ea
         ssid xxxxxx
         type managed
         channel 36 (5180 MHz), width: 80 MHz, center1: 5210 MHz

----------

[  715.890990] iwlwifi 0000:01:00.0: regular scan timed out
[  715.891047] iwlwifi 0000:01:00.0: Microcode SW error detected. 
Restarting 0x2000000.
[  715.891172] iwlwifi 0000:01:00.0: Start IWL Error Log Dump:

[  715.891175] iwlwifi 0000:01:00.0: Status: 0x00000100, count: 6
[  715.891177] iwlwifi 0000:01:00.0: Loaded firmware version: 36.9f0a2d68.0
[  715.891180] iwlwifi 0000:01:00.0: 0x00000084 | NMI_INTERRUPT_UNKNOWN
[  715.891182] iwlwifi 0000:01:00.0: 0x000002A0 | trm_hw_status0
[  715.891184] iwlwifi 0000:01:00.0: 0x00000000 | trm_hw_status1
[  715.891186] iwlwifi 0000:01:00.0: 0x0002485C | branchlink2
[  715.891188] iwlwifi 0000:01:00.0: 0x0003A7CA | interruptlink1
[  715.891190] iwlwifi 0000:01:00.0: 0x00000868 | interruptlink2
[  715.891192] iwlwifi 0000:01:00.0: 0x00000000 | data1
[  715.891195] iwlwifi 0000:01:00.0: 0x00000080 | data2
[  715.891197] iwlwifi 0000:01:00.0: 0x07830000 | data3
[  715.891199] iwlwifi 0000:01:00.0: 0x34C0F92B | beacon time
[  715.891201] iwlwifi 0000:01:00.0: 0xB72786AB | tsf low
[  715.891203] iwlwifi 0000:01:00.0: 0x000002C5 | tsf hi
[  715.891205] iwlwifi 0000:01:00.0: 0x00000000 | time gp1
[  715.891207] iwlwifi 0000:01:00.0: 0x01E94EF8 | time gp2
[  715.891209] iwlwifi 0000:01:00.0: 0x00000001 | uCode revision type
[  715.891211] iwlwifi 0000:01:00.0: 0x00000024 | uCode version major
[  715.891213] iwlwifi 0000:01:00.0: 0x9F0A2D68 | uCode version minor
[  715.891215] iwlwifi 0000:01:00.0: 0x00000230 | hw version
[  715.891217] iwlwifi 0000:01:00.0: 0x00489000 | board version
[  715.891219] iwlwifi 0000:01:00.0: 0x0AA1001C | hcmd
[  715.891221] iwlwifi 0000:01:00.0: 0x00022000 | isr0
[  715.891223] iwlwifi 0000:01:00.0: 0x00800000 | isr1
[  715.891225] iwlwifi 0000:01:00.0: 0x08001802 | isr2
[  715.891227] iwlwifi 0000:01:00.0: 0x00417CC0 | isr3
[  715.891229] iwlwifi 0000:01:00.0: 0x00000000 | isr4
[  715.891231] iwlwifi 0000:01:00.0: 0x0AA1001C | last cmd Id
[  715.891233] iwlwifi 0000:01:00.0: 0x00000000 | wait_event
[  715.891235] iwlwifi 0000:01:00.0: 0x00000080 | l2p_control
[  715.891237] iwlwifi 0000:01:00.0: 0x00018020 | l2p_duration
[  715.891239] iwlwifi 0000:01:00.0: 0x0000003F | l2p_mhvalid
[  715.891241] iwlwifi 0000:01:00.0: 0x00000080 | l2p_addr_match
[  715.891243] iwlwifi 0000:01:00.0: 0x0000000D | lmpm_pmg_sel
[  715.891245] iwlwifi 0000:01:00.0: 0x04120134 | timestamp
[  715.891247] iwlwifi 0000:01:00.0: 0x003490A0 | flow_handler
[  715.891298] iwlwifi 0000:01:00.0: 0x00000000 | ADVANCED_SYSASSERT
[  715.891300] iwlwifi 0000:01:00.0: 0x00000000 | umac branchlink1
[  715.891302] iwlwifi 0000:01:00.0: 0x00000000 | umac branchlink2
[  715.891304] iwlwifi 0000:01:00.0: 0x00000000 | umac interruptlink1
[  715.891306] iwlwifi 0000:01:00.0: 0x00000000 | umac interruptlink2
[  715.891308] iwlwifi 0000:01:00.0: 0x00000000 | umac data1
[  715.891310] iwlwifi 0000:01:00.0: 0x00000000 | umac data2
[  715.891312] iwlwifi 0000:01:00.0: 0x00000000 | umac data3
[  715.891314] iwlwifi 0000:01:00.0: 0x00000000 | umac major
[  715.891316] iwlwifi 0000:01:00.0: 0x00000000 | umac minor
[  715.891318] iwlwifi 0000:01:00.0: 0x00000000 | frame pointer
[  715.891320] iwlwifi 0000:01:00.0: 0x00000000 | stack pointer
[  715.891322] iwlwifi 0000:01:00.0: 0x00000000 | last host cmd
[  715.891324] iwlwifi 0000:01:00.0: 0x00000000 | isr status reg
[  715.891330] ieee80211 phy1: Hardware restart was requested


Let me know if I should provide any further information.

Thanks,
Lukas


             reply	other threads:[~2019-02-07 15:04 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-07 15:04 Lukas Redlinger [this message]
2019-02-07 21:07 ` [BUG] regular scan timed out Emmanuel Grumbach

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=588b2e78-a2f1-49f7-4a15-baa4f8658cc1@agilox.net \
    --to=lukas.redlinger@agilox.net \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.