All of lore.kernel.org
 help / color / mirror / Atom feed
From: akpm@linux-foundation.org
To: sboyd@codeaurora.org, mm-commits@vger.kernel.org
Subject: + scripts-spellingtxt-add-regsiter-register-spelling-mistake.patch added to -mm tree
Date: Fri, 17 Mar 2017 14:40:36 -0700	[thread overview]
Message-ID: <58cc57d4.H+eIJE98+Z+pKthJ%akpm@linux-foundation.org> (raw)


The patch titled
     Subject: scripts/spelling.txt: Add regsiter -> register spelling mistake
has been added to the -mm tree.  Its filename is
     scripts-spellingtxt-add-regsiter-register-spelling-mistake.patch

This patch should soon appear at
    http://ozlabs.org/~akpm/mmots/broken-out/scripts-spellingtxt-add-regsiter-register-spelling-mistake.patch
and later at
    http://ozlabs.org/~akpm/mmotm/broken-out/scripts-spellingtxt-add-regsiter-register-spelling-mistake.patch

Before you just go and hit "reply", please:
   a) Consider who else should be cc'ed
   b) Prefer to cc a suitable mailing list as well
   c) Ideally: find the original patch on the mailing list and do a
      reply-to-all to that, adding suitable additional cc's

*** Remember to use Documentation/SubmitChecklist when testing your code ***

The -mm tree is included into linux-next and is updated
there every 3-4 working days

------------------------------------------------------
From: Stephen Boyd <sboyd@codeaurora.org>
Subject: scripts/spelling.txt: Add regsiter -> register spelling mistake

This typo is quite common.  Fix it and add it to the spelling file so that
checkpatch catches it earlier.

Link: http://lkml.kernel.org/r/20170317011131.6881-2-sboyd@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---

 Documentation/devicetree/bindings/net/brcm,unimac-mdio.txt |    2 +-
 arch/arc/kernel/unwind.c                                   |    2 +-
 arch/arm/kernel/kgdb.c                                     |    2 +-
 arch/arm/mach-ixp4xx/common-pci.c                          |    4 ++--
 arch/m68k/ifpsp060/src/ilsp.S                              |    2 +-
 arch/m68k/ifpsp060/src/isp.S                               |    2 +-
 arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c      |    2 +-
 arch/mips/include/asm/octeon/cvmx-helper-rgmii.h           |    2 +-
 arch/parisc/kernel/entry.S                                 |    2 +-
 arch/powerpc/mm/icswx.c                                    |    2 +-
 drivers/acpi/cppc_acpi.c                                   |    2 +-
 drivers/clk/qcom/common.c                                  |    2 +-
 drivers/cpufreq/sti-cpufreq.c                              |    4 ++--
 drivers/infiniband/hw/hns/hns_roce_hw_v1.c                 |    2 +-
 drivers/infiniband/hw/hns/hns_roce_mr.c                    |    2 +-
 drivers/net/can/rcar/rcar_canfd.c                          |    2 +-
 drivers/net/ethernet/amd/amd8111e.h                        |    4 ++--
 drivers/net/ethernet/atheros/atl1c/atl1c_hw.c              |    2 +-
 drivers/net/ethernet/intel/igb/e1000_phy.c                 |    2 +-
 drivers/scsi/isci/registers.h                              |    4 ++--
 drivers/scsi/mpt3sas/mpt3sas_base.h                        |    2 +-
 include/linux/bcma/bcma_driver_pci.h                       |    2 +-
 include/linux/ftrace.h                                     |    2 +-
 include/uapi/linux/ipmi.h                                  |    2 +-
 scripts/spelling.txt                                       |    1 +
 sound/soc/soc-core.c                                       |    2 +-
 26 files changed, 30 insertions(+), 29 deletions(-)

diff -puN Documentation/devicetree/bindings/net/brcm,unimac-mdio.txt~scripts-spellingtxt-add-regsiter-register-spelling-mistake Documentation/devicetree/bindings/net/brcm,unimac-mdio.txt
--- a/Documentation/devicetree/bindings/net/brcm,unimac-mdio.txt~scripts-spellingtxt-add-regsiter-register-spelling-mistake
+++ a/Documentation/devicetree/bindings/net/brcm,unimac-mdio.txt
@@ -3,7 +3,7 @@
 Required properties:
 - compatible: should one from "brcm,genet-mdio-v1", "brcm,genet-mdio-v2",
   "brcm,genet-mdio-v3", "brcm,genet-mdio-v4" or "brcm,unimac-mdio"
-- reg: address and length of the regsiter set for the device, first one is the
+- reg: address and length of the register set for the device, first one is the
   base register, and the second one is optional and for indirect accesses to
   larger than 16-bits MDIO transactions
 - reg-names: name(s) of the register must be "mdio" and optional "mdio_indir_rw"
diff -puN arch/arc/kernel/unwind.c~scripts-spellingtxt-add-regsiter-register-spelling-mistake arch/arc/kernel/unwind.c
--- a/arch/arc/kernel/unwind.c~scripts-spellingtxt-add-regsiter-register-spelling-mistake
+++ a/arch/arc/kernel/unwind.c
@@ -845,7 +845,7 @@ static int processCFI(const u8 *start, c
 				    * state->dataAlign;
 				break;
 			case DW_CFA_def_cfa_register:
-				unw_debug("cfa_def_cfa_regsiter: ");
+				unw_debug("cfa_def_cfa_register: ");
 				state->cfa.reg = get_uleb128(&ptr.p8, end);
 				break;
 				/*todo case DW_CFA_def_cfa_expression: */
diff -puN arch/arm/kernel/kgdb.c~scripts-spellingtxt-add-regsiter-register-spelling-mistake arch/arm/kernel/kgdb.c
--- a/arch/arm/kernel/kgdb.c~scripts-spellingtxt-add-regsiter-register-spelling-mistake
+++ a/arch/arm/kernel/kgdb.c
@@ -269,7 +269,7 @@ int kgdb_arch_remove_breakpoint(struct k
 
 /*
  * Register our undef instruction hooks with ARM undef core.
- * We regsiter a hook specifically looking for the KGB break inst
+ * We register a hook specifically looking for the KGB break inst
  * and we handle the normal undef case within the do_undefinstr
  * handler.
  */
diff -puN arch/arm/mach-ixp4xx/common-pci.c~scripts-spellingtxt-add-regsiter-register-spelling-mistake arch/arm/mach-ixp4xx/common-pci.c
--- a/arch/arm/mach-ixp4xx/common-pci.c~scripts-spellingtxt-add-regsiter-register-spelling-mistake
+++ a/arch/arm/mach-ixp4xx/common-pci.c
@@ -43,14 +43,14 @@
 int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data);
 
 /*
- * Base address for PCI regsiter region
+ * Base address for PCI register region
  */
 unsigned long ixp4xx_pci_reg_base = 0;
 
 /*
  * PCI cfg an I/O routines are done by programming a 
  * command/byte enable register, and then read/writing
- * the data from a data regsiter. We need to ensure
+ * the data from a data register. We need to ensure
  * these transactions are atomic or we will end up
  * with corrupt data on the bus or in a driver.
  */
diff -puN arch/m68k/ifpsp060/src/ilsp.S~scripts-spellingtxt-add-regsiter-register-spelling-mistake arch/m68k/ifpsp060/src/ilsp.S
--- a/arch/m68k/ifpsp060/src/ilsp.S~scripts-spellingtxt-add-regsiter-register-spelling-mistake
+++ a/arch/m68k/ifpsp060/src/ilsp.S
@@ -776,7 +776,7 @@ muls64_zero:
 # ALGORITHM ***********************************************************	#
 #	In the interest of simplicity, all operands are converted to	#
 # longword size whether the operation is byte, word, or long. The	#
-# bounds are sign extended accordingly. If Rn is a data regsiter, Rn is #
+# bounds are sign extended accordingly. If Rn is a data register, Rn is #
 # also sign extended. If Rn is an address register, it need not be sign #
 # extended since the full register is always used.			#
 #	The condition codes are set correctly before the final "rts".	#
diff -puN arch/m68k/ifpsp060/src/isp.S~scripts-spellingtxt-add-regsiter-register-spelling-mistake arch/m68k/ifpsp060/src/isp.S
--- a/arch/m68k/ifpsp060/src/isp.S~scripts-spellingtxt-add-regsiter-register-spelling-mistake
+++ a/arch/m68k/ifpsp060/src/isp.S
@@ -1876,7 +1876,7 @@ movp_read_err:
 # word, or longword sized operands. Then, in the interest of		#
 # simplicity, all operands are converted to longword size whether the	#
 # operation is byte, word, or long. The bounds are sign extended	#
-# accordingly. If Rn is a data regsiter, Rn is also sign extended. If	#
+# accordingly. If Rn is a data register, Rn is also sign extended. If	#
 # Rn is an address register, it need not be sign extended since the	#
 # full register is always used.						#
 #	The comparisons are made and the condition codes calculated.	#
diff -puN arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c~scripts-spellingtxt-add-regsiter-register-spelling-mistake arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c~scripts-spellingtxt-add-regsiter-register-spelling-mistake
+++ a/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c
@@ -152,7 +152,7 @@ static int __cvmx_helper_errata_asx_pass
 }
 
 /**
- * Configure all of the ASX, GMX, and PKO regsiters required
+ * Configure all of the ASX, GMX, and PKO registers required
  * to get RGMII to function on the supplied interface.
  *
  * @interface: PKO Interface to configure (0 or 1)
diff -puN arch/mips/include/asm/octeon/cvmx-helper-rgmii.h~scripts-spellingtxt-add-regsiter-register-spelling-mistake arch/mips/include/asm/octeon/cvmx-helper-rgmii.h
--- a/arch/mips/include/asm/octeon/cvmx-helper-rgmii.h~scripts-spellingtxt-add-regsiter-register-spelling-mistake
+++ a/arch/mips/include/asm/octeon/cvmx-helper-rgmii.h
@@ -55,7 +55,7 @@ extern int __cvmx_helper_rgmii_probe(int
 extern void cvmx_helper_rgmii_internal_loopback(int port);
 
 /**
- * Configure all of the ASX, GMX, and PKO regsiters required
+ * Configure all of the ASX, GMX, and PKO registers required
  * to get RGMII to function on the supplied interface.
  *
  * @interface: PKO Interface to configure (0 or 1)
diff -puN arch/parisc/kernel/entry.S~scripts-spellingtxt-add-regsiter-register-spelling-mistake arch/parisc/kernel/entry.S
--- a/arch/parisc/kernel/entry.S~scripts-spellingtxt-add-regsiter-register-spelling-mistake
+++ a/arch/parisc/kernel/entry.S
@@ -1369,7 +1369,7 @@ nadtlb_nullify:
 
 	/* 
 		When there is no translation for the probe address then we
-		must nullify the insn and return zero in the target regsiter.
+		must nullify the insn and return zero in the target register.
 		This will indicate to the calling code that it does not have 
 		write/read privileges to this address.
 
diff -puN arch/powerpc/mm/icswx.c~scripts-spellingtxt-add-regsiter-register-spelling-mistake arch/powerpc/mm/icswx.c
--- a/arch/powerpc/mm/icswx.c~scripts-spellingtxt-add-regsiter-register-spelling-mistake
+++ a/arch/powerpc/mm/icswx.c
@@ -186,7 +186,7 @@ static u32 acop_get_inst(struct pt_regs
 }
 
 /**
- * @regs: regsiters at time of interrupt
+ * @regs: registers at time of interrupt
  * @address: storage address
  * @error_code: Fault code, usually the DSISR or ESR depending on
  *		processor type
diff -puN drivers/acpi/cppc_acpi.c~scripts-spellingtxt-add-regsiter-register-spelling-mistake drivers/acpi/cppc_acpi.c
--- a/drivers/acpi/cppc_acpi.c~scripts-spellingtxt-add-regsiter-register-spelling-mistake
+++ a/drivers/acpi/cppc_acpi.c
@@ -95,7 +95,7 @@ static DEFINE_PER_CPU(struct cpc_desc *,
 /* pcc mapped address + header size + offset within PCC subspace */
 #define GET_PCC_VADDR(offs) (pcc_data.pcc_comm_addr + 0x8 + (offs))
 
-/* Check if a CPC regsiter is in PCC */
+/* Check if a CPC register is in PCC */
 #define CPC_IN_PCC(cpc) ((cpc)->type == ACPI_TYPE_BUFFER &&		\
 				(cpc)->cpc_entry.reg.space_id ==	\
 				ACPI_ADR_SPACE_PLATFORM_COMM)
diff -puN drivers/clk/qcom/common.c~scripts-spellingtxt-add-regsiter-register-spelling-mistake drivers/clk/qcom/common.c
--- a/drivers/clk/qcom/common.c~scripts-spellingtxt-add-regsiter-register-spelling-mistake
+++ a/drivers/clk/qcom/common.c
@@ -128,7 +128,7 @@ static void qcom_cc_gdsc_unregister(void
 
 /*
  * Backwards compatibility with old DTs. Register a pass-through factor 1/1
- * clock to translate 'path' clk into 'name' clk and regsiter the 'path'
+ * clock to translate 'path' clk into 'name' clk and register the 'path'
  * clk as a fixed rate clock if it isn't present.
  */
 static int _qcom_cc_register_board_clk(struct device *dev, const char *path,
diff -puN drivers/cpufreq/sti-cpufreq.c~scripts-spellingtxt-add-regsiter-register-spelling-mistake drivers/cpufreq/sti-cpufreq.c
--- a/drivers/cpufreq/sti-cpufreq.c~scripts-spellingtxt-add-regsiter-register-spelling-mistake
+++ a/drivers/cpufreq/sti-cpufreq.c
@@ -236,7 +236,7 @@ use_defaults:
 	return 0;
 }
 
-static int sti_cpufreq_fetch_syscon_regsiters(void)
+static int sti_cpufreq_fetch_syscon_registers(void)
 {
 	struct device *dev = ddata.cpu;
 	struct device_node *np = dev->of_node;
@@ -275,7 +275,7 @@ static int sti_cpufreq_init(void)
 		goto skip_voltage_scaling;
 	}
 
-	ret = sti_cpufreq_fetch_syscon_regsiters();
+	ret = sti_cpufreq_fetch_syscon_registers();
 	if (ret)
 		goto skip_voltage_scaling;
 
diff -puN drivers/infiniband/hw/hns/hns_roce_hw_v1.c~scripts-spellingtxt-add-regsiter-register-spelling-mistake drivers/infiniband/hw/hns/hns_roce_hw_v1.c
--- a/drivers/infiniband/hw/hns/hns_roce_hw_v1.c~scripts-spellingtxt-add-regsiter-register-spelling-mistake
+++ a/drivers/infiniband/hw/hns/hns_roce_hw_v1.c
@@ -1725,7 +1725,7 @@ int hns_roce_v1_write_mtpt(void *mb_buf,
 	roce_set_field(mpt_entry->mpt_byte_64, MPT_BYTE_64_L_KEY_IDX_H_M,
 		       MPT_BYTE_64_L_KEY_IDX_H_S, mtpt_idx >> MTPT_IDX_SHIFT);
 
-	/* DMA memory regsiter */
+	/* DMA memory register */
 	if (mr->type == MR_TYPE_DMA)
 		return 0;
 
diff -puN drivers/infiniband/hw/hns/hns_roce_mr.c~scripts-spellingtxt-add-regsiter-register-spelling-mistake drivers/infiniband/hw/hns/hns_roce_mr.c
--- a/drivers/infiniband/hw/hns/hns_roce_mr.c~scripts-spellingtxt-add-regsiter-register-spelling-mistake
+++ a/drivers/infiniband/hw/hns/hns_roce_mr.c
@@ -204,7 +204,7 @@ int hns_roce_mtt_init(struct hns_roce_de
 		return 0;
 	}
 
-	/* Note: if page_shift is zero, FAST memory regsiter */
+	/* Note: if page_shift is zero, FAST memory register */
 	mtt->page_shift = page_shift;
 
 	/* Compute MTT entry necessary */
diff -puN drivers/net/can/rcar/rcar_canfd.c~scripts-spellingtxt-add-regsiter-register-spelling-mistake drivers/net/can/rcar/rcar_canfd.c
--- a/drivers/net/can/rcar/rcar_canfd.c~scripts-spellingtxt-add-regsiter-register-spelling-mistake
+++ a/drivers/net/can/rcar/rcar_canfd.c
@@ -413,7 +413,7 @@
 /* RSCFDnRPGACCr */
 #define RCANFD_C_RPGACC(r)		(0x1900 + (0x04 * (r)))
 
-/* CAN FD mode specific regsiter map */
+/* CAN FD mode specific register map */
 
 /* RSCFDnCFDCmXXX -> RCANFD_F_XXX(m) */
 #define RCANFD_F_DCFG(m)		(0x0500 + (0x20 * (m)))
diff -puN drivers/net/ethernet/amd/amd8111e.h~scripts-spellingtxt-add-regsiter-register-spelling-mistake drivers/net/ethernet/amd/amd8111e.h
--- a/drivers/net/ethernet/amd/amd8111e.h~scripts-spellingtxt-add-regsiter-register-spelling-mistake
+++ a/drivers/net/ethernet/amd/amd8111e.h
@@ -48,7 +48,7 @@ eg., if the value 10011010b is written i
 /* 32 bit registers */
 
 #define  ASF_STAT		0x00	/* ASF status register */
-#define CHIPID			0x04	/* Chip ID regsiter */
+#define CHIPID			0x04	/* Chip ID register */
 #define	MIB_DATA		0x10	/* MIB data register */
 #define MIB_ADDR		0x14	/* MIB address register */
 #define STAT0			0x30	/* Status0 register */
@@ -648,7 +648,7 @@ typedef enum {
 /* driver ioctl parameters */
 #define AMD8111E_REG_DUMP_LEN	 13*sizeof(u32)
 
-/* amd8111e desriptor format */
+/* amd8111e descriptor format */
 
 struct amd8111e_tx_dr{
 
diff -puN drivers/net/ethernet/atheros/atl1c/atl1c_hw.c~scripts-spellingtxt-add-regsiter-register-spelling-mistake drivers/net/ethernet/atheros/atl1c/atl1c_hw.c
--- a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c~scripts-spellingtxt-add-regsiter-register-spelling-mistake
+++ a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c
@@ -307,7 +307,7 @@ void atl1c_start_phy_polling(struct atl1
 
 /*
  * atl1c_read_phy_core
- * core function to read register in PHY via MDIO control regsiter.
+ * core function to read register in PHY via MDIO control register.
  * ext: extension register (see IEEE 802.3)
  * dev: device address (see IEEE 802.3 DEVAD, PRTAD is fixed to 0)
  * reg: reg to read
diff -puN drivers/net/ethernet/intel/igb/e1000_phy.c~scripts-spellingtxt-add-regsiter-register-spelling-mistake drivers/net/ethernet/intel/igb/e1000_phy.c
--- a/drivers/net/ethernet/intel/igb/e1000_phy.c~scripts-spellingtxt-add-regsiter-register-spelling-mistake
+++ a/drivers/net/ethernet/intel/igb/e1000_phy.c
@@ -127,7 +127,7 @@ out:
  *  @offset: register offset to be read
  *  @data: pointer to the read data
  *
- *  Reads the MDI control regsiter in the PHY at offset and stores the
+ *  Reads the MDI control register in the PHY at offset and stores the
  *  information read to data.
  **/
 s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
diff -puN drivers/scsi/isci/registers.h~scripts-spellingtxt-add-regsiter-register-spelling-mistake drivers/scsi/isci/registers.h
--- a/drivers/scsi/isci/registers.h~scripts-spellingtxt-add-regsiter-register-spelling-mistake
+++ a/drivers/scsi/isci/registers.h
@@ -652,7 +652,7 @@ struct scu_iit_entry {
 
 
 /*
- * TODO: Where is the SAS_LNKTOV regsiter?
+ * TODO: Where is the SAS_LNKTOV register?
  * TODO: Where is the SAS_PHYTOV register? */
 
 #define SCU_SAS_TRANSMIT_IDENTIFICATION_SMP_TARGET_SHIFT            (1)
@@ -1827,7 +1827,7 @@ struct scu_peg_registers {
 };
 
 /**
- * struct scu_registers - SCU regsiters including both PEG registers if we turn
+ * struct scu_registers - SCU registers including both PEG registers if we turn
  *    on that compile option. All of these registers are in the memory mapped
  *    space returned from BAR1.
  *
diff -puN drivers/scsi/mpt3sas/mpt3sas_base.h~scripts-spellingtxt-add-regsiter-register-spelling-mistake drivers/scsi/mpt3sas/mpt3sas_base.h
--- a/drivers/scsi/mpt3sas/mpt3sas_base.h~scripts-spellingtxt-add-regsiter-register-spelling-mistake
+++ a/drivers/scsi/mpt3sas/mpt3sas_base.h
@@ -1421,7 +1421,7 @@ void mpt3sas_ctl_add_to_event_log(struct
 	Mpi2EventNotificationReply_t *mpi_reply);
 
 void mpt3sas_enable_diag_buffer(struct MPT3SAS_ADAPTER *ioc,
-	u8 bits_to_regsiter);
+	u8 bits_to_register);
 int mpt3sas_send_diag_release(struct MPT3SAS_ADAPTER *ioc, u8 buffer_type,
 	u8 *issue_reset);
 
diff -puN include/linux/bcma/bcma_driver_pci.h~scripts-spellingtxt-add-regsiter-register-spelling-mistake include/linux/bcma/bcma_driver_pci.h
--- a/include/linux/bcma/bcma_driver_pci.h~scripts-spellingtxt-add-regsiter-register-spelling-mistake
+++ a/include/linux/bcma/bcma_driver_pci.h
@@ -80,7 +80,7 @@ struct pci_dev;
 #define  BCMA_CORE_PCI_MDIODATA_DEV_TX		0x1e	/* SERDES TX Dev */
 #define  BCMA_CORE_PCI_MDIODATA_DEV_RX		0x1f	/* SERDES RX Dev */
 #define BCMA_CORE_PCI_PCIEIND_ADDR		0x0130	/* indirect access to the internal register */
-#define BCMA_CORE_PCI_PCIEIND_DATA		0x0134	/* Data to/from the internal regsiter */
+#define BCMA_CORE_PCI_PCIEIND_DATA		0x0134	/* Data to/from the internal register */
 #define BCMA_CORE_PCI_CLKREQENCTRL		0x0138	/*  >= rev 6, Clkreq rdma control */
 #define BCMA_CORE_PCI_PCICFG0			0x0400	/* PCI config space 0 (rev >= 8) */
 #define BCMA_CORE_PCI_PCICFG1			0x0500	/* PCI config space 1 (rev >= 8) */
diff -puN include/linux/ftrace.h~scripts-spellingtxt-add-regsiter-register-spelling-mistake include/linux/ftrace.h
--- a/include/linux/ftrace.h~scripts-spellingtxt-add-regsiter-register-spelling-mistake
+++ a/include/linux/ftrace.h
@@ -70,7 +70,7 @@ ftrace_func_t ftrace_ops_get_func(struct
  * CONTROL, SAVE_REGS, SAVE_REGS_IF_SUPPORTED, RECURSION_SAFE, STUB and
  * IPMODIFY are a kind of attribute flags which can be set only before
  * registering the ftrace_ops, and can not be modified while registered.
- * Changing those attribute flags after regsitering ftrace_ops will
+ * Changing those attribute flags after registering ftrace_ops will
  * cause unexpected results.
  *
  * ENABLED - set/unset when ftrace_ops is registered/unregistered
diff -puN include/uapi/linux/ipmi.h~scripts-spellingtxt-add-regsiter-register-spelling-mistake include/uapi/linux/ipmi.h
--- a/include/uapi/linux/ipmi.h~scripts-spellingtxt-add-regsiter-register-spelling-mistake
+++ a/include/uapi/linux/ipmi.h
@@ -355,7 +355,7 @@ struct ipmi_cmdspec {
 #define IPMICTL_REGISTER_FOR_CMD	_IOR(IPMI_IOC_MAGIC, 14,	\
 					     struct ipmi_cmdspec)
 /*
- * Unregister a regsitered command.  error values:
+ * Unregister a registered command.  error values:
  *  - EFAULT - an address supplied was invalid.
  *  - ENOENT - The netfn/cmd was not found registered for this user.
  */
diff -puN scripts/spelling.txt~scripts-spellingtxt-add-regsiter-register-spelling-mistake scripts/spelling.txt
--- a/scripts/spelling.txt~scripts-spellingtxt-add-regsiter-register-spelling-mistake
+++ a/scripts/spelling.txt
@@ -872,6 +872,7 @@ registerd||registered
 registeresd||registered
 registes||registers
 registraration||registration
+regsiter||register
 regster||register
 regualar||regular
 reguator||regulator
diff -puN sound/soc/soc-core.c~scripts-spellingtxt-add-regsiter-register-spelling-mistake sound/soc/soc-core.c
--- a/sound/soc/soc-core.c~scripts-spellingtxt-add-regsiter-register-spelling-mistake
+++ a/sound/soc/soc-core.c
@@ -936,7 +936,7 @@ static struct snd_soc_component *soc_fin
  *
  * @dlc: name of the DAI and optional component info to match
  *
- * This function will search all regsitered components and their DAIs to
+ * This function will search all registered components and their DAIs to
  * find the DAI of the same name. The component's of_node and name
  * should also match if being specified.
  *
_

Patches currently in -mm which might be from sboyd@codeaurora.org are

scripts-spellingtxt-add-memory-pattern-and-fix-typos.patch
scripts-spellingtxt-add-regsiter-register-spelling-mistake.patch


                 reply	other threads:[~2017-03-17 21:52 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=58cc57d4.H+eIJE98+Z+pKthJ%akpm@linux-foundation.org \
    --to=akpm@linux-foundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mm-commits@vger.kernel.org \
    --cc=sboyd@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.