From: Bhupesh Sharma <bhupesh.sharma@linaro.org>
To: linux-arm-msm@vger.kernel.org, andersson@kernel.org
Cc: agross@kernel.org, konrad.dybcio@linaro.org,
linux-kernel@vger.kernel.org, bhupesh.linux@gmail.com,
linux-remoteproc@vger.kernel.org, robh+dt@kernel.org,
devicetree@vger.kernel.org
Subject: Re: [PATCH] arm64: dts: qcom: sm6115: Add remoteproc nodes
Date: Tue, 14 Mar 2023 02:28:16 +0530 [thread overview]
Message-ID: <5922cd55-060c-d1b1-0eb2-0875439e4268@linaro.org> (raw)
In-Reply-To: <20230128054256.2100501-1-bhupesh.sharma@linaro.org>
Hi Bjorn,
On 1/28/23 11:12 AM, Bhupesh Sharma wrote:
> Add the adsp, cdsp and modem remoteproc nodes to sm6115.
>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> ---
> - Depends on the dt-binding and driver change submitted via [1].
> [1]. https://lore.kernel.org/linux-arm-msm/20230128053504.2099620-1-bhupesh.sharma@linaro.org
Gentle Ping. Since the dependencies (dt-bindings and driver changes)
have already been merged into linux-next, this patch can now be applied.
Thanks,
Bhupesh
> arch/arm64/boot/dts/qcom/sm6115.dtsi | 184 +++++++++++++++++++++++++++
> 1 file changed, 184 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> index 3c66f998a81b..3540cd24af5c 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> @@ -1309,6 +1309,39 @@ dispcc: clock-controller@5f00000 {
> #power-domain-cells = <1>;
> };
>
> + remoteproc_mpss: remoteproc@6080000 {
> + compatible = "qcom,sm6115-mpss-pas";
> + reg = <0x06080000 0x100>;
> +
> + interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>,
> + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
> + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "wdog", "fatal", "ready", "handover",
> + "stop-ack", "shutdown-ack";
> +
> + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
> + clock-names = "xo";
> +
> + power-domains = <&rpmpd SM6115_VDDCX>;
> +
> + memory-region = <&pil_modem_mem>;
> +
> + qcom,smem-states = <&modem_smp2p_out 0>;
> + qcom,smem-state-names = "stop";
> +
> + status = "disabled";
> +
> + glink-edge {
> + interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>;
> + label = "mpss";
> + qcom,remote-pid = <1>;
> + mboxes = <&apcs_glb 12>;
> + };
> + };
> +
> stm@8002000 {
> compatible = "arm,coresight-stm", "arm,primecell";
> reg = <0x08002000 0x1000>,
> @@ -1921,6 +1954,157 @@ funnel_apss1_in: endpoint {
> };
> };
>
> + remoteproc_adsp: remoteproc@ab00000 {
> + compatible = "qcom,sm6115-adsp-pas";
> + reg = <0x0ab00000 0x100>;
> +
> + interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>,
> + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "wdog", "fatal", "ready",
> + "handover", "stop-ack";
> +
> + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
> + clock-names = "xo";
> +
> + power-domains = <&rpmpd SM6115_VDD_LPI_CX>,
> + <&rpmpd SM6115_VDD_LPI_MX>;
> +
> + memory-region = <&pil_adsp_mem>;
> +
> + qcom,smem-states = <&adsp_smp2p_out 0>;
> + qcom,smem-state-names = "stop";
> +
> + status = "disabled";
> +
> + glink-edge {
> + interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>;
> + label = "lpass";
> + qcom,remote-pid = <2>;
> + mboxes = <&apcs_glb 8>;
> +
> + fastrpc {
> + compatible = "qcom,fastrpc";
> + qcom,glink-channels = "fastrpcglink-apps-dsp";
> + label = "adsp";
> + qcom,non-secure-domain;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + compute-cb@3 {
> + compatible = "qcom,fastrpc-compute-cb";
> + reg = <3>;
> + iommus = <&apps_smmu 0x01c3 0x0>;
> + };
> +
> + compute-cb@4 {
> + compatible = "qcom,fastrpc-compute-cb";
> + reg = <4>;
> + iommus = <&apps_smmu 0x01c4 0x0>;
> + };
> +
> + compute-cb@5 {
> + compatible = "qcom,fastrpc-compute-cb";
> + reg = <5>;
> + iommus = <&apps_smmu 0x01c5 0x0>;
> + };
> +
> + compute-cb@6 {
> + compatible = "qcom,fastrpc-compute-cb";
> + reg = <6>;
> + iommus = <&apps_smmu 0x01c6 0x0>;
> + };
> +
> + compute-cb@7 {
> + compatible = "qcom,fastrpc-compute-cb";
> + reg = <7>;
> + iommus = <&apps_smmu 0x01c7 0x0>;
> + };
> + };
> + };
> + };
> +
> + remoteproc_cdsp: remoteproc@b300000 {
> + compatible = "qcom,sm6115-cdsp-pas";
> + reg = <0x0b300000 0x100000>;
> +
> + interrupts-extended = <&intc GIC_SPI 265 IRQ_TYPE_EDGE_RISING>,
> + <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> + <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> + <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> + <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "wdog", "fatal", "ready",
> + "handover", "stop-ack";
> +
> + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
> + clock-names = "xo";
> +
> + power-domains = <&rpmpd SM6115_VDDCX>;
> +
> + memory-region = <&pil_cdsp_mem>;
> +
> + qcom,smem-states = <&cdsp_smp2p_out 0>;
> + qcom,smem-state-names = "stop";
> +
> + status = "disabled";
> +
> + glink-edge {
> + interrupts = <GIC_SPI 261 IRQ_TYPE_EDGE_RISING>;
> + label = "cdsp";
> + qcom,remote-pid = <5>;
> + mboxes = <&apcs_glb 28>;
> +
> + fastrpc {
> + compatible = "qcom,fastrpc";
> + qcom,glink-channels = "fastrpcglink-apps-dsp";
> + label = "cdsp";
> + qcom,non-secure-domain;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + compute-cb@1 {
> + compatible = "qcom,fastrpc-compute-cb";
> + reg = <1>;
> + iommus = <&apps_smmu 0x0c01 0x0>;
> + };
> +
> + compute-cb@2 {
> + compatible = "qcom,fastrpc-compute-cb";
> + reg = <2>;
> + iommus = <&apps_smmu 0x0c02 0x0>;
> + };
> +
> + compute-cb@3 {
> + compatible = "qcom,fastrpc-compute-cb";
> + reg = <3>;
> + iommus = <&apps_smmu 0x0c03 0x0>;
> + };
> +
> + compute-cb@4 {
> + compatible = "qcom,fastrpc-compute-cb";
> + reg = <4>;
> + iommus = <&apps_smmu 0x0c04 0x0>;
> + };
> +
> + compute-cb@5 {
> + compatible = "qcom,fastrpc-compute-cb";
> + reg = <5>;
> + iommus = <&apps_smmu 0x0c05 0x0>;
> + };
> +
> + compute-cb@6 {
> + compatible = "qcom,fastrpc-compute-cb";
> + reg = <6>;
> + iommus = <&apps_smmu 0x0c06 0x0>;
> + };
> +
> + /* note: secure cb9 in downstream */
> + };
> + };
> + };
> +
> apps_smmu: iommu@c600000 {
> compatible = "qcom,sm6115-smmu-500", "qcom,smmu-500", "arm,mmu-500";
> reg = <0x0c600000 0x80000>;
next prev parent reply other threads:[~2023-03-13 20:59 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-28 5:42 [PATCH] arm64: dts: qcom: sm6115: Add remoteproc nodes Bhupesh Sharma
2023-03-13 20:58 ` Bhupesh Sharma [this message]
2023-03-13 21:03 ` Konrad Dybcio
2023-03-14 3:45 ` Bhupesh Sharma
2023-03-15 23:34 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5922cd55-060c-d1b1-0eb2-0875439e4268@linaro.org \
--to=bhupesh.sharma@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=bhupesh.linux@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.