Re: [Linux-cifsd-devel] ksmbd testing progress - buildbot run passed

[Marios Makassikis <mmakassikis@freebox.fr>]

On Wed, 2021-04-21 at 12:55 -0500, Steve French wrote:
> On Wed, Apr 21, 2021 at 12:42 PM Marios Makassikis
> <mmakassikis@freebox.fr> wrote:
> > On Wed, 2021-04-21 at 12:18 -0500, Steve French wrote:
> > > Current Linux client (minus the deferred close patches) to
> > > current
> > > ksmbd on 5.12-rc8 as a test target passed all tests:
> > > 
> > > http://smb3-test-rhel-75.southcentralus.cloudapp.azure.com/#/builders/8/builds/32
> > > 
> > 
> > It doesn't look like any test was actually run though.
> 
> The run times look plausible.  Let me know if you see anything
> suspicious.  I can ssh in to make sure - but probably fine.  I only
> typically worry about tests that take less than 3 or 4 seconds (to
> doublecheck that they aren't skipped)
> 
> > I looked at some of the tests output and they all had umount
> > errors:
> > 
> >   umount: /mnt/test: not mounted.
> >   umount: /mnt/test: not mounted.
> 
> That is normal, the tests unmount at the end of the previous one
> (unless it times out) and tries to unmount again before the next one
> starts.
> 
> > The warmup smb3 generic/001 hints at cifs.ko not being loaded:
> > 
> > rmmod: ERROR: Module cifs is not currently loaded
> > mount error(113): could not connect to 192.168.122.13Unable to find
> > suitable address.
> 
> That was because the test client VM had some out of memory issues and
> so I shut down the windows server test target
> (which is not relevant for these tests)

Right, thanks for the explanations. For a second there I thought this
was a case of 'the test failed successfully' :-).

Marios