From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Winkler, Tomas" Subject: Re: [PATCH 1/3] tpm/tpm_crb: implement tpm crb idle state Date: Thu, 8 Sep 2016 12:35:48 +0000 Message-ID: <5B8DA87D05A7694D9FA63FD143655C1B542CC2AC@hasmsx108.ger.corp.intel.com> References: <1473247953-24617-1-git-send-email-tomas.winkler@intel.com> <1473247953-24617-2-git-send-email-tomas.winkler@intel.com> <20160908111115.GD4712@intel.com> <20160908111745.GF4712@intel.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20160908111745.GF4712-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org> Content-Language: en-US List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: tpmdd-devel-bounces-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org To: Jarkko Sakkinen Cc: "tpmdd-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org" List-Id: tpmdd-devel@lists.sourceforge.net > -----Original Message----- > From: Jarkko Sakkinen [mailto:jarkko.sakkinen-VuQAYsv1563Yd54FQh9/CA@public.gmane.org] > Sent: Thursday, September 08, 2016 14:18 > To: Winkler, Tomas > Cc: tpmdd-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org > Subject: Re: [PATCH 1/3] tpm/tpm_crb: implement tpm crb idle state > > On Thu, Sep 08, 2016 at 02:11:15PM +0300, Jarkko Sakkinen wrote: > > On Wed, Sep 07, 2016 at 02:32:31PM +0300, Tomas Winkler wrote: > > > The register TPM_CRB_CTRL_REQ_x contains bits goIdle and cmdReady > > > for SW to indicate that the device can enter or should exit the idle state. > > > > > > The legacy ACPI-start (SMI + DMA) based devices do not support these > > > bits and the idle state management is not exposed to the host SW. > > > Thus, this functionality only is enabled only for a CRB start (MMIO) > > > based devices. > > > > > > We introduce two new callbacks for command ready and go idle for TPM > > > CRB device which are called across TPM transactions. > > > > > > Based on Jarkko Sakkinen oringal > > > patch > > > 'tpm_crb: implement power tpm crb power management' > > > > > > Signed-off-by: Tomas Winkler > > > --- > > > drivers/char/tpm/tpm-interface.c | 21 +++++++++++ > > > drivers/char/tpm/tpm_crb.c | 77 > ++++++++++++++++++++++++++++++++++++++++ > > > include/linux/tpm.h | 3 +- > > > 3 files changed, 100 insertions(+), 1 deletion(-) > > > > > > diff --git a/drivers/char/tpm/tpm-interface.c > > > b/drivers/char/tpm/tpm-interface.c > > > index fd863ff30f79..c78dca5ce7a6 100644 > > > --- a/drivers/char/tpm/tpm-interface.c > > > +++ b/drivers/char/tpm/tpm-interface.c > > > @@ -327,6 +327,20 @@ unsigned long tpm_calc_ordinal_duration(struct > > > tpm_chip *chip, } EXPORT_SYMBOL_GPL(tpm_calc_ordinal_duration); > > > > > > +static inline int tpm_go_idle(struct tpm_chip *chip) { > > > + if (!chip->ops->idle) > > > + return 0; > > > + return chip->ops->idle(chip); > > > +} > > > + > > > +static inline int tpm_cmd_ready(struct tpm_chip *chip) { > > > + if (!chip->ops->ready) > > > + return 0; > > > + return chip->ops->ready(chip); > > > +} > > > + > > > /* > > > * Internal kernel interface to transmit TPM commands > > > */ > > > @@ -353,6 +367,10 @@ ssize_t tpm_transmit(struct tpm_chip *chip, > const u8 *buf, size_t bufsiz, > > > if (!(flags & TPM_TRANSMIT_UNLOCKED)) > > > mutex_lock(&chip->tpm_mutex); > > > > > > + rc = tpm_cmd_ready(chip); > > > + if (rc) > > > + goto out; > > > + > > > rc = chip->ops->send(chip, (u8 *) buf, count); > > > if (rc < 0) { > > > dev_err(&chip->dev, > > > @@ -394,8 +412,11 @@ out_recv: > > > dev_err(&chip->dev, > > > "tpm_transmit: tpm_recv: error %zd\n", rc); > > > out: > > > + tpm_go_idle(chip); > > > + > > > if (!(flags & TPM_TRANSMIT_UNLOCKED)) > > > mutex_unlock(&chip->tpm_mutex); > > > + > > > return rc; > > > } > > > > > > diff --git a/drivers/char/tpm/tpm_crb.c b/drivers/char/tpm/tpm_crb.c > > > index 82a3ccd52a3a..98a7fdfe9936 100644 > > > --- a/drivers/char/tpm/tpm_crb.c > > > +++ b/drivers/char/tpm/tpm_crb.c > > > @@ -83,6 +83,81 @@ struct crb_priv { > > > u8 __iomem *rsp; > > > }; > > > > > > +/** > > > + * __crb_go_idle - write CRB_CTRL_REQ_GO_IDLE to > TPM_CRB_CTRL_REQ > > > + * The device should respond within TIMEOUT_C by clearing the bit. > > > + * Anyhow, we do not wait here as a consequent CMD_READY request > > > + * will be handled correctly even if idle was not completed. > > > + * > > > + * @dev: tpm device > > > + * @priv: crb private context > > > + * > > > + * Return: 0 always > > > + */ > > > +static int __crb_go_idle(struct device *dev, struct crb_priv *priv) > > > +{ > > > + if (priv->flags & CRB_FL_ACPI_START) > > > + return 0; > > > + iowrite32(CRB_CTRL_REQ_GO_IDLE, &priv->cca->req); > > > + /* we don't really care when this settles */ > > > + > > > + return 0; > > > +} > > > + > > > +static int crb_go_idle(struct tpm_chip *chip) { > > > + struct crb_priv *priv = dev_get_drvdata(&chip->dev); > > > + > > > + return __crb_go_idle(&chip->dev, priv); } > > > + > > > +/** > > > + * __crb_cmd_ready - write CRB_CTRL_REQ_CMD_READY to > TPM_CRB_CTRL_REQ > > > + * and poll till the device acknowledge it by clearing the bit. > > > + * The device should respond within TIMEOUT_C. > > > + * > > > + * The function does nothing for devices with ACPI-start method > > > + * > > > + * @dev: tpm device > > > + * @priv: crb private context > > > + * > > > + * Return: 0 on success -ETIME on timeout; */ static int > > > +__crb_cmd_ready(struct device *dev, struct crb_priv *priv) { > > > + ktime_t stop, start; > > > + > > > + if (priv->flags & CRB_FL_ACPI_START) > > > + return 0; > > > + > > > + iowrite32(CRB_CTRL_REQ_CMD_READY, &priv->cca->req); > > > + > > > + start = ktime_get(); > > > + stop = ktime_add(start, ms_to_ktime(TPM2_TIMEOUT_C)); > > > + do { > > > + if (!(ioread32(&priv->cca->req) & > CRB_CTRL_REQ_CMD_READY)) { > > > + dev_dbg(dev, "cmdReady in %lld usecs\n", > > > + ktime_to_us(ktime_sub(ktime_get(), start))); > > > + return 0; > > > + } > > > + usleep_range(500, 1000); > > > + } while (ktime_before(ktime_get(), stop)); > > > > What's the problem of using wait_for_tpm_stat like: > > > > http://git.infradead.org/users/jjs/linux-tpmdd.git/commitdiff/7a1172b5 > > b3cb38083ae931309db216db3c528efe > > I'm proponent for my version since it's less intrusive change and adds less > ad-hoc code to the CRB driver. I'm not sure what is adhoc about this code, this keeps the issue local to crb . I removed the use of wait_for_tpm_stat() for purpose, this just abusing this interface for something which is not 'stats' in addition you are setting rubbish from the CA_STATUS as its value is not retained and on the other side the values of CA_REQUEST is read from edge (from 1 to 0) so there will be rubbish collected when we are not in transition. Last we need to fine tune polling delay for the HW we cannot have it in the generic code. > > Would you mind if I would construct v3 with two patches from this patch set > and my version with some tweaks from your code that are needed for the > workaround? I'm already reworking the code according last night discussion with Jason, please hold on. Thanks Tomas ------------------------------------------------------------------------------