All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alexandre TORGUE <alexandre.torgue@foss.st.com>
To: Steffen Trumtrar <s.trumtrar@pengutronix.de>,
	<linux-stm32@st-md-mailman.stormreply.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	<devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v9 00/10] ARM: stm32: add support for Phycore STM32MP1
Date: Tue, 16 May 2023 17:16:59 +0200	[thread overview]
Message-ID: <5b8cdb16-dc93-e3c6-4e13-4e72dce18a58@foss.st.com> (raw)
In-Reply-To: <20230505060158.16516-1-s.trumtrar@pengutronix.de>

Hi Steffen

On 5/5/23 08:01, Steffen Trumtrar wrote:
> Hi,
> 
> this series adds support for the Phytec STM32MP1-based SoM and board.
> 
> Phytec itself calls the board "Phycore STM32MP1-3" and has other
> endnumbers. I only have access to the "-3" and that's what this series
> adds.
> 
>      Changes since v8:
>        - fix typo: rgmii-sleep-8 -> rgmii-sleep-3
>        - rebase to v6.3
> 
>      Changes since v7:
>        - remove unused gpu_reservde memory range
>        - get rid of duplicate ethernet clock assignments
>        - remove secure-status for sdmmc
>      
>      Changes since v6:
>        - rename mdio0->mdio
>      
>      Changes since v5:
>        - cleanup dt_bindings_check warnings
>      
>      Changes since v4:
>        - cleanup usage of "status = okay|disabled"
>        - fix remaining non-generic node names
>        - rework sai nodes to not duplicate the existing settings in stm32mp151.dtsi
>      
>      Changes since v3:
>        - cleanup board-compatible
>        - cleanup aliases
>        - rename nodes according to schema
>        - use interrupt flag
> 
> 
> Best regards,
> Steffen Trumtrar
> 
> 
> Steffen Trumtrar (10):
>    ARM: dts: stm32: Add alternate pinmux for ethernet
>    ARM: dts: stm32: Add alternate pinmux for sai2b
>    ARM: dts: stm32: Add new pinmux for sdmmc1_b4
>    ARM: dts: stm32: Add new pinmux for sdmmc2_d47
>    ARM: dts: stm32: Add pinmux for USART1 pins
>    ARM: dts: stm32: Add idle/sleep pinmux for USART3
>    ARM: dts: stm32: Add sleep pinmux for SPI1 pins_a
>    dt-bindings: arm: stm32: Add Phytec STM32MP1 board
>    ARM: dts: stm32: add STM32MP1-based Phytec SoM
>    ARM: dts: stm32: add STM32MP1-based Phytec board
> 
>   .../devicetree/bindings/arm/stm32/stm32.yaml  |   6 +
>   arch/arm/boot/dts/Makefile                    |   3 +-
>   arch/arm/boot/dts/stm32mp15-pinctrl.dtsi      | 231 +++++++
>   .../dts/stm32mp157c-phycore-stm32mp1-3.dts    |  60 ++
>   .../stm32mp157c-phycore-stm32mp15-som.dtsi    | 577 ++++++++++++++++++
>   5 files changed, 876 insertions(+), 1 deletion(-)
>   create mode 100644 arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dts
>   create mode 100644 arch/arm/boot/dts/stm32mp157c-phycore-stm32mp15-som.dtsi
> 

Series applied on stm32-next. Thanks for your efforts!

Regards
Alex



WARNING: multiple messages have this Message-ID (diff)
From: Alexandre TORGUE <alexandre.torgue@foss.st.com>
To: Steffen Trumtrar <s.trumtrar@pengutronix.de>,
	<linux-stm32@st-md-mailman.stormreply.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	<devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v9 00/10] ARM: stm32: add support for Phycore STM32MP1
Date: Tue, 16 May 2023 17:16:59 +0200	[thread overview]
Message-ID: <5b8cdb16-dc93-e3c6-4e13-4e72dce18a58@foss.st.com> (raw)
In-Reply-To: <20230505060158.16516-1-s.trumtrar@pengutronix.de>

Hi Steffen

On 5/5/23 08:01, Steffen Trumtrar wrote:
> Hi,
> 
> this series adds support for the Phytec STM32MP1-based SoM and board.
> 
> Phytec itself calls the board "Phycore STM32MP1-3" and has other
> endnumbers. I only have access to the "-3" and that's what this series
> adds.
> 
>      Changes since v8:
>        - fix typo: rgmii-sleep-8 -> rgmii-sleep-3
>        - rebase to v6.3
> 
>      Changes since v7:
>        - remove unused gpu_reservde memory range
>        - get rid of duplicate ethernet clock assignments
>        - remove secure-status for sdmmc
>      
>      Changes since v6:
>        - rename mdio0->mdio
>      
>      Changes since v5:
>        - cleanup dt_bindings_check warnings
>      
>      Changes since v4:
>        - cleanup usage of "status = okay|disabled"
>        - fix remaining non-generic node names
>        - rework sai nodes to not duplicate the existing settings in stm32mp151.dtsi
>      
>      Changes since v3:
>        - cleanup board-compatible
>        - cleanup aliases
>        - rename nodes according to schema
>        - use interrupt flag
> 
> 
> Best regards,
> Steffen Trumtrar
> 
> 
> Steffen Trumtrar (10):
>    ARM: dts: stm32: Add alternate pinmux for ethernet
>    ARM: dts: stm32: Add alternate pinmux for sai2b
>    ARM: dts: stm32: Add new pinmux for sdmmc1_b4
>    ARM: dts: stm32: Add new pinmux for sdmmc2_d47
>    ARM: dts: stm32: Add pinmux for USART1 pins
>    ARM: dts: stm32: Add idle/sleep pinmux for USART3
>    ARM: dts: stm32: Add sleep pinmux for SPI1 pins_a
>    dt-bindings: arm: stm32: Add Phytec STM32MP1 board
>    ARM: dts: stm32: add STM32MP1-based Phytec SoM
>    ARM: dts: stm32: add STM32MP1-based Phytec board
> 
>   .../devicetree/bindings/arm/stm32/stm32.yaml  |   6 +
>   arch/arm/boot/dts/Makefile                    |   3 +-
>   arch/arm/boot/dts/stm32mp15-pinctrl.dtsi      | 231 +++++++
>   .../dts/stm32mp157c-phycore-stm32mp1-3.dts    |  60 ++
>   .../stm32mp157c-phycore-stm32mp15-som.dtsi    | 577 ++++++++++++++++++
>   5 files changed, 876 insertions(+), 1 deletion(-)
>   create mode 100644 arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dts
>   create mode 100644 arch/arm/boot/dts/stm32mp157c-phycore-stm32mp15-som.dtsi
> 

Series applied on stm32-next. Thanks for your efforts!

Regards
Alex



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2023-05-16 15:17 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-05  6:01 [PATCH v9 00/10] ARM: stm32: add support for Phycore STM32MP1 Steffen Trumtrar
2023-05-05  6:01 ` Steffen Trumtrar
2023-05-05  6:01 ` [PATCH v9 01/10] ARM: dts: stm32: Add alternate pinmux for ethernet Steffen Trumtrar
2023-05-05  6:01   ` Steffen Trumtrar
2023-05-05  6:01 ` [PATCH v9 02/10] ARM: dts: stm32: Add alternate pinmux for sai2b Steffen Trumtrar
2023-05-05  6:01   ` Steffen Trumtrar
2023-05-05  6:01 ` [PATCH v9 03/10] ARM: dts: stm32: Add new pinmux for sdmmc1_b4 Steffen Trumtrar
2023-05-05  6:01   ` Steffen Trumtrar
2023-05-05  6:01 ` [PATCH v9 04/10] ARM: dts: stm32: Add new pinmux for sdmmc2_d47 Steffen Trumtrar
2023-05-05  6:01   ` Steffen Trumtrar
2023-05-05  6:01 ` [PATCH v9 05/10] ARM: dts: stm32: Add pinmux for USART1 pins Steffen Trumtrar
2023-05-05  6:01   ` Steffen Trumtrar
2023-05-05  6:01 ` [PATCH v9 06/10] ARM: dts: stm32: Add idle/sleep pinmux for USART3 Steffen Trumtrar
2023-05-05  6:01   ` Steffen Trumtrar
2023-05-05  6:01 ` [PATCH v9 07/10] ARM: dts: stm32: Add sleep pinmux for SPI1 pins_a Steffen Trumtrar
2023-05-05  6:01   ` Steffen Trumtrar
2023-05-05  6:01 ` [PATCH v9 08/10] dt-bindings: arm: stm32: Add Phytec STM32MP1 board Steffen Trumtrar
2023-05-05  6:01   ` Steffen Trumtrar
2023-05-05  6:01 ` [PATCH v9 09/10] ARM: dts: stm32: add STM32MP1-based Phytec SoM Steffen Trumtrar
2023-05-05  6:01   ` Steffen Trumtrar
2023-05-05  6:01 ` [PATCH v9 10/10] ARM: dts: stm32: add STM32MP1-based Phytec board Steffen Trumtrar
2023-05-05  6:01   ` Steffen Trumtrar
2023-05-23 14:58   ` Christophe Parant
2023-05-23 14:58     ` Christophe Parant
2023-06-23  8:59     ` Christophe Parant
2023-06-23  8:59       ` Christophe Parant
2023-06-23 10:39       ` Alexandre TORGUE
2023-06-23 10:39         ` Alexandre TORGUE
2023-05-16 15:16 ` Alexandre TORGUE [this message]
2023-05-16 15:16   ` [PATCH v9 00/10] ARM: stm32: add support for Phycore STM32MP1 Alexandre TORGUE

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5b8cdb16-dc93-e3c6-4e13-4e72dce18a58@foss.st.com \
    --to=alexandre.torgue@foss.st.com \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=s.trumtrar@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.