All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Shankar, Uma" <uma.shankar@intel.com>
To: Kai Vehmanen <kai.vehmanen@linux.intel.com>,
	"intel-gfx@lists.freedesktop.org"
	<intel-gfx@lists.freedesktop.org>
Cc: "ville.syrjala@linux.intel.com" <ville.syrjala@linux.intel.com>,
	"Nikula,  Jani" <jani.nikula@intel.com>
Subject: Re: [Intel-gfx] [PATCH v2] drm/i915/display: program audio CDCLK-TS for keepalives
Date: Wed, 15 Sep 2021 19:55:37 +0000	[thread overview]
Message-ID: <5bc9b8ea0a0344bcb8cbd7c3d8b67cc0@intel.com> (raw)
In-Reply-To: <20210913164004.3999218-1-kai.vehmanen@linux.intel.com>



> -----Original Message-----
> From: Kai Vehmanen <kai.vehmanen@linux.intel.com>
> Sent: Monday, September 13, 2021 10:10 PM
> To: intel-gfx@lists.freedesktop.org
> Cc: Shankar, Uma <uma.shankar@intel.com>; ville.syrjala@linux.intel.com; Nikula,
> Jani <jani.nikula@intel.com>; Kai Vehmanen <kai.vehmanen@linux.intel.com>
> Subject: [PATCH v2] drm/i915/display: program audio CDCLK-TS for keepalives
> 
> XE_LPD display adds support for display audio codec keepalive feature.
> This feature works also when display codec is in D3 state and the audio link is off
> (BCLK off). To enable this functionality, display driver must update the
> AUD_TS_CDCLK_M/N registers whenever CDCLK is changed.
> Actual timestamps are generated only when the audio codec driver specifically
> enables the KeepAlive (KAE) feature.
> 
> This patch adds new hooks to intel_set_cdclk() in order to inform display audio driver
> when CDCLK change is started and when it is complete.

Looks Good to me.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>

> Bspec: 53679
> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_audio.c | 37 ++++++++++++++++++++++
> drivers/gpu/drm/i915/display/intel_audio.h |  2 ++
> drivers/gpu/drm/i915/display/intel_cdclk.c |  5 +++
>  drivers/gpu/drm/i915/i915_reg.h            |  4 +++
>  4 files changed, 48 insertions(+)
> 
> Changes V1->V2:
>  - addressed review comments Jani Nikula (Sep 10)
>  - added an initial call to intel_audio_cdclk_change_post() so
>    that AUD_CDCLK initial configuration is always performance
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_audio.c
> b/drivers/gpu/drm/i915/display/intel_audio.c
> index 532237588511..ff74dc4dc121 100644
> --- a/drivers/gpu/drm/i915/display/intel_audio.c
> +++ b/drivers/gpu/drm/i915/display/intel_audio.c
> @@ -936,6 +936,40 @@ void intel_init_audio_hooks(struct drm_i915_private
> *dev_priv)
>  	}
>  }
> 
> +struct aud_ts_cdclk_m_n {
> +	u8 m;
> +	u16 n;
> +};
> +
> +void intel_audio_cdclk_change_pre(struct drm_i915_private *i915) {
> +	if (DISPLAY_VER(i915) >= 13)
> +		intel_de_rmw(i915, AUD_TS_CDCLK_M, AUD_TS_CDCLK_M_EN, 0);
> }
> +
> +static void get_aud_ts_cdclk_m_n(int refclk, int cdclk, struct
> +aud_ts_cdclk_m_n *aud_ts) {
> +	if (refclk == 24000)
> +		aud_ts->m = 12;
> +	else
> +		aud_ts->m = 15;
> +
> +	aud_ts->n = cdclk * aud_ts->m / 24000; }
> +
> +void intel_audio_cdclk_change_post(struct drm_i915_private *i915) {
> +	struct aud_ts_cdclk_m_n aud_ts;
> +
> +	if (DISPLAY_VER(i915) >= 13) {
> +		get_aud_ts_cdclk_m_n(i915->cdclk.hw.ref, i915->cdclk.hw.cdclk,
> +&aud_ts);
> +
> +		intel_de_write(i915, AUD_TS_CDCLK_N, aud_ts.n);
> +		intel_de_write(i915, AUD_TS_CDCLK_M, aud_ts.m |
> AUD_TS_CDCLK_M_EN);
> +		drm_dbg_kms(&i915->drm, "aud_ts_cdclk set to M=%u, N=%u\n",
> aud_ts.m, aud_ts.n);
> +	}
> +}
> +
>  static int glk_force_audio_cdclk_commit(struct intel_atomic_state *state,
>  					struct intel_crtc *crtc,
>  					bool enable)
> @@ -1318,6 +1352,9 @@ static void i915_audio_component_init(struct
> drm_i915_private *dev_priv)
>  		dev_priv->audio_freq_cntrl = aud_freq;
>  	}
> 
> +	/* init with current cdclk */
> +	intel_audio_cdclk_change_post(dev_priv);
> +
>  	dev_priv->audio_component_registered = true;  }
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_audio.h
> b/drivers/gpu/drm/i915/display/intel_audio.h
> index a3657c7a7ba2..dcb259dd2da7 100644
> --- a/drivers/gpu/drm/i915/display/intel_audio.h
> +++ b/drivers/gpu/drm/i915/display/intel_audio.h
> @@ -18,6 +18,8 @@ void intel_audio_codec_enable(struct intel_encoder *encoder,
> void intel_audio_codec_disable(struct intel_encoder *encoder,
>  			       const struct intel_crtc_state *old_crtc_state,
>  			       const struct drm_connector_state *old_conn_state);
> +void intel_audio_cdclk_change_pre(struct drm_i915_private *dev_priv);
> +void intel_audio_cdclk_change_post(struct drm_i915_private *dev_priv);
>  void intel_audio_init(struct drm_i915_private *dev_priv);  void
> intel_audio_deinit(struct drm_i915_private *dev_priv);
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_cdclk.c
> b/drivers/gpu/drm/i915/display/intel_cdclk.c
> index 9aec17b33819..a1365f31142d 100644
> --- a/drivers/gpu/drm/i915/display/intel_cdclk.c
> +++ b/drivers/gpu/drm/i915/display/intel_cdclk.c
> @@ -24,6 +24,7 @@
>  #include <linux/time.h>
> 
>  #include "intel_atomic.h"
> +#include "intel_audio.h"
>  #include "intel_bw.h"
>  #include "intel_cdclk.h"
>  #include "intel_de.h"
> @@ -1943,6 +1944,8 @@ static void intel_set_cdclk(struct drm_i915_private
> *dev_priv,
>  		intel_psr_pause(intel_dp);
>  	}
> 
> +	intel_audio_cdclk_change_pre(dev_priv);
> +
>  	/*
>  	 * Lock aux/gmbus while we change cdclk in case those
>  	 * functions use cdclk. Not all platforms/ports do, @@ -1971,6 +1974,8 @@
> static void intel_set_cdclk(struct drm_i915_private *dev_priv,
>  		intel_psr_resume(intel_dp);
>  	}
> 
> +	intel_audio_cdclk_change_post(dev_priv);
> +
>  	if (drm_WARN(&dev_priv->drm,
>  		     intel_cdclk_changed(&dev_priv->cdclk.hw, cdclk_config),
>  		     "cdclk state doesn't match!\n")) { diff --git
> a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index
> bd63760207b0..795775c9e2eb 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -9734,6 +9734,10 @@ enum {
>  #define AUD_PIN_BUF_CTL		_MMIO(0x48414)
>  #define   AUD_PIN_BUF_ENABLE		REG_BIT(31)
> 
> +#define AUD_TS_CDCLK_M			_MMIO(0x65ea0)
> +#define   AUD_TS_CDCLK_M_EN		REG_BIT(31)
> +#define AUD_TS_CDCLK_N			_MMIO(0x65ea4)
> +
>  /* Display Audio Config Reg */
>  #define AUD_CONFIG_BE			_MMIO(0x65ef0)
>  #define HBLANK_EARLY_ENABLE_ICL(pipe)		(0x1 << (20 - (pipe)))
> --
> 2.32.0


  parent reply	other threads:[~2021-09-15 19:55 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-13 16:40 [Intel-gfx] [PATCH v2] drm/i915/display: program audio CDCLK-TS for keepalives Kai Vehmanen
2021-09-13 18:06 ` [Intel-gfx] ✗ Fi.CI.BAT: failure for drm/i915/display: program audio CDCLK-TS for keepalives (rev2) Patchwork
2021-09-15 19:55 ` Shankar, Uma [this message]
2021-09-21 12:55 ` [Intel-gfx] ✓ Fi.CI.BAT: success for drm/i915/display: program audio CDCLK-TS for keepalives (rev3) Patchwork
2021-09-21 15:13 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
2021-10-06 13:49 ` [Intel-gfx] [PATCH v2] drm/i915/display: program audio CDCLK-TS for keepalives Ville Syrjälä
2021-10-06 15:45   ` Kai Vehmanen
2021-10-06 16:56     ` Ville Syrjälä

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5bc9b8ea0a0344bcb8cbd7c3d8b67cc0@intel.com \
    --to=uma.shankar@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jani.nikula@intel.com \
    --cc=kai.vehmanen@linux.intel.com \
    --cc=ville.syrjala@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.