Hi there,

On 3/9/21 1:27 PM, jchludzinski via lists.yoctoproject.org wrote:
> Where do I assign a static IP address to my sole network interface?
>
That depends on whether or not you are using a network manager and if so 
which one.

You haven't told us much about your board and it's network interfaces 
and how you built your system.

> I tried using the Linux boot parameters (in extlinux.conf):
>
> *LABEL Arria10 SOCDK SDMMC*
> *    KERNEL ../zImage*
> *    FDT ../socfpga_arria10_phead.dtb*
> *    APPEND root=/dev/mmcblk0p2 rw rootwait earlyprintk 
> console=ttyS0,115200n8 ip=192.168.0.101:255.255.255.0:eth0*
> Then I tried editing: /etc/network/interfaces
> *iface eth0 inet static *
> *address 192.168.0.101*
> *netmask 255.255.255.0*
> Both failed. Where do I go?

To start, do you have the driver required for your network interface? 
You can use ifconfig -a to see if your network interface is detected by 
the kernel. You should also look at the kernel log if the network 
interface is configured.

:rjs

>
> 
>
-- 
Rudolf J Streif
CEO/CTO ibeeto
+1.855.442.3386 x700