All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Ye, Tony" <tony.ye@intel.com>
To: Chris Wilson <chris@chris-wilson.co.uk>,
	"Robert M. Fosha" <robert.m.fosha@intel.com>,
	igt-dev@lists.freedesktop.org
Cc: Sally Qi <feng.qi@intel.com>
Subject: Re: [igt-dev] [PATCH i-g-t v4] tests/i915/gem_huc_copy: Enable a HuC copy test
Date: Thu, 16 Jan 2020 15:59:08 -0800	[thread overview]
Message-ID: <5cbc0fc2-3c8a-fb32-8f05-779ead8e14f8@intel.com> (raw)
In-Reply-To: <a25f2fda-ffa8-b9f3-540d-4c23346114d8@intel.com>



On 1/16/2020 3:56 PM, Ye, Tony wrote:
> There are two issues with the HUC_STATUS query ioctl.
> 
> 1. on a platform with huc supported, i915.enable_guc=0, got unexpected 
> return value:
> ret=0, param.value=0, errno=ENODEV
it is ret=-1, param.value=0, errno=ENODEV, sorry for the typo.
> 
> 2. the return value doesn't differentiate these two conditions:
> a. i915.enable_guc=0/1, huc is disabled, skip the huc_copy test;
> b. i915.enable_guc=2/3, huc load/authentication failed, fail huc_copy.
> A patch like this is required:
> https://patchwork.freedesktop.org/patch/306419/?series=61001&rev=1
> 
> Regards,
> Tony
> On 1/10/2020 5:05 PM, Ye, Tony wrote:
>>
>>
>> On 1/10/2020 11:54 AM, Chris Wilson wrote:
>>> Quoting Ye, Tony (2020-01-10 19:51:58)
>>>>
>>>>
>>>> On 1/10/2020 10:28 AM, Chris Wilson wrote:
>>>>> Quoting Robert M. Fosha (2020-01-10 17:41:46)
>>>>>> +static bool
>>>>>> +check_huc_enabled(int fd)
>>>>>> +{
>>>>>> +       int dir;
>>>>>> +       dir = igt_sysfs_open_parameters(fd);
>>>>>> +
>>>>>> +       if (dir < 0)
>>>>>> +               return 0;
>>>>>> +
>>>>>> +       if (igt_sysfs_get_u32(dir, "enable_guc") & 2)
>>>>>> +               return 1;
>>>>>> +       else
>>>>>> +               return 0;
>>>>>
>>>>> No. If you have this in your userspace, please immediately remove it,
>>>>> and backport that to any and all stable branches and releases.
>>>>> -Chris
>>>>
>>>> The code is to skip the test when HuC is disabled by the enable_guc
>>>> module parameter. If HuC is disabled by the enable_guc param, then skip
>>>> the test. If the HuC failed to load due to a real error, then fail the
>>>> test.
>>>>
>>>> Could you suggest how to handle HUC_STATUS failure properly without 
>>>> this
>>>> code?
>>>
>>> Look at the error code from querying HUC_STATUS.
>>> -Chris
>>
>> Agree that the check should be done via uAPI instead of the sysfs. 
>> Thanks for the feedback.
>> Tony
>>>
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev

  reply	other threads:[~2020-01-16 23:59 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-19 23:50 [igt-dev] [PATCH i-g-t] tests/i915/gem_huc_copy: Enable a HuC copy test Robert M. Fosha
2019-12-20  0:34 ` [igt-dev] ✗ GitLab.Pipeline: warning for " Patchwork
2019-12-20  0:58 ` [igt-dev] ✓ Fi.CI.BAT: success " Patchwork
2019-12-20 22:11 ` [igt-dev] [PATCH i-g-t] " Antonio Argenziano
2019-12-20 22:41 ` [igt-dev] [PATCH i-g-t v2] " Robert M. Fosha
2019-12-23 22:19   ` [igt-dev] [PATCH i-g-t v3] " Robert M. Fosha
2020-01-10 17:41     ` [igt-dev] [PATCH i-g-t v4] " Robert M. Fosha
2020-01-10 18:28       ` Chris Wilson
2020-01-10 19:51         ` Ye, Tony
2020-01-10 19:54           ` Chris Wilson
2020-01-11  1:05             ` Ye, Tony
2020-01-16 23:56               ` Ye, Tony
2020-01-16 23:59                 ` Ye, Tony [this message]
2020-04-14 21:24       ` [igt-dev] [PATCH i-g-t v5] " Robert M. Fosha
2020-05-08 16:31         ` Argenziano, Antonio
2019-12-20 23:19 ` [igt-dev] ✗ GitLab.Pipeline: failure for tests/i915/gem_huc_copy: Enable a HuC copy test (rev2) Patchwork
2019-12-21  0:38 ` [igt-dev] ✗ Fi.CI.BAT: " Patchwork
2019-12-21  3:18 ` [igt-dev] ✓ Fi.CI.IGT: success for tests/i915/gem_huc_copy: Enable a HuC copy test Patchwork
2019-12-23 23:28 ` [igt-dev] ✗ Fi.CI.BAT: failure for tests/i915/gem_huc_copy: Enable a HuC copy test (rev3) Patchwork
2020-01-10 19:14 ` [igt-dev] ✓ Fi.CI.BAT: success for tests/i915/gem_huc_copy: Enable a HuC copy test (rev4) Patchwork
2020-01-14 10:10 ` [igt-dev] ✓ Fi.CI.IGT: " Patchwork
2020-04-14 22:07 ` [igt-dev] ✓ Fi.CI.BAT: success for tests/i915/gem_huc_copy: Enable a HuC copy test (rev5) Patchwork
2020-04-15 12:30 ` [igt-dev] ✓ Fi.CI.IGT: " Patchwork
2020-06-18 16:41 ` [igt-dev] [PATCH i-g-t v6] tests/i915/gem_huc_copy: Enable a HuC copy test Robert M. Fosha
2020-06-23 17:36   ` Argenziano, Antonio

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5cbc0fc2-3c8a-fb32-8f05-779ead8e14f8@intel.com \
    --to=tony.ye@intel.com \
    --cc=chris@chris-wilson.co.uk \
    --cc=feng.qi@intel.com \
    --cc=igt-dev@lists.freedesktop.org \
    --cc=robert.m.fosha@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.