[PATCH v3 0/5] Add SIMATIC IOT2050 board support

[PATCH v3 0/5] Add SIMATIC IOT2050 board support

[Jan Kiszka]

This is the baseline support for the SIMATIC IOT2050 devices.

Changes in v3:
 - rebased
 - addressed several checkpatch warnings
    - a few #ifdef -> IS_ENABLED conversions
    - comment marker for SPDK identifier in .S file
    - trailing whitespaces
 - factored out rti_wdt_load_fw (less #ifdef)

Changes in v2:
 - rebased
 - sync with upstream-accepted DT
 - add boot switch
 - include watchdog support

Allows to boot mainline 5.10 kernels, but not the original BSP-derived
kernel we currently ship as reference. This is due to the TI sysfw ABI
breakages between 2.x and 3.x. We will soon provide a transitional
kernel that allows booting both firmware ABIs - as long as full upstream
kernel support is work in progress.

Note that this baseline support lacks Ethernet drivers. We are working
closely with TI to ensure that the to-be-upstreamed icssg-prueth driver
will work both with new SR2.0 AM65x silicon as well as with SR1.0 which
is used in the currently shipped IOT2050 devices.

A staging tree for complete IOT2050 support can be found at [1]. Full
image integration is available via [2].

Jan

[1] https://github.com/siemens/u-boot/commits/jan/iot2050
[2] https://github.com/siemens/meta-iot2050

Jan Kiszka (5):
  arm: dts: Add IOT2050 device tree files
  board: siemens: Add support for SIMATIC IOT2050 devices
  arm64: dts: ti: k3-am65-mcu: Add RTI watchdog entry
  watchdog: rti_wdt: Add support for loading firmware
  configs: iot2050: Enable watchdog support, but do not auto-start it

 arch/arm/dts/Makefile                         |   7 +-
 arch/arm/dts/k3-am65-iot2050-boot-image.dtsi  | 105 +++
 .../dts/k3-am65-iot2050-common-u-boot.dtsi    | 103 +++
 arch/arm/dts/k3-am65-iot2050-common.dtsi      | 655 ++++++++++++++++++
 arch/arm/dts/k3-am65-iot2050-spl.dts          |  16 +
 arch/arm/dts/k3-am65-mcu.dtsi                 |   9 +
 arch/arm/dts/k3-am6528-iot2050-basic.dts      |  67 ++
 arch/arm/dts/k3-am6548-iot2050-advanced.dts   |  66 ++
 arch/arm/mach-k3/Kconfig                      |   1 +
 board/siemens/iot2050/Kconfig                 |  32 +
 board/siemens/iot2050/MAINTAINERS             |   8 +
 board/siemens/iot2050/Makefile                |  10 +
 board/siemens/iot2050/README                  |  65 ++
 board/siemens/iot2050/board.c                 | 278 ++++++++
 board/siemens/iot2050/config.mk               |   8 +
 configs/iot2050_defconfig                     | 146 ++++
 drivers/watchdog/Kconfig                      |  20 +
 drivers/watchdog/Makefile                     |   5 +
 drivers/watchdog/rti_wdt.c                    |  72 ++
 drivers/watchdog/rti_wdt_fw.S                 |  20 +
 include/configs/iot2050.h                     |  60 ++
 21 files changed, 1752 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/dts/k3-am65-iot2050-boot-image.dtsi
 create mode 100644 arch/arm/dts/k3-am65-iot2050-common-u-boot.dtsi
 create mode 100644 arch/arm/dts/k3-am65-iot2050-common.dtsi
 create mode 100644 arch/arm/dts/k3-am65-iot2050-spl.dts
 create mode 100644 arch/arm/dts/k3-am6528-iot2050-basic.dts
 create mode 100644 arch/arm/dts/k3-am6548-iot2050-advanced.dts
 create mode 100644 board/siemens/iot2050/Kconfig
 create mode 100644 board/siemens/iot2050/MAINTAINERS
 create mode 100644 board/siemens/iot2050/Makefile
 create mode 100644 board/siemens/iot2050/README
 create mode 100644 board/siemens/iot2050/board.c
 create mode 100644 board/siemens/iot2050/config.mk
 create mode 100644 configs/iot2050_defconfig
 create mode 100644 drivers/watchdog/rti_wdt_fw.S
 create mode 100644 include/configs/iot2050.h

-- 
2.26.2

[PATCH v3 1/5] arm: dts: Add IOT2050 device tree files

[Jan Kiszka]

From: Jan Kiszka <jan.kiszka@siemens.com>

Prepares for the addition of the IOT2050 board which is based on the TI
AM65x. The board comes in two variants, Basic and Advanced, so there are
separate dts files. Furthermore, the SPL has its own device tree.

Based on original board support by Le Jin, Gao Nian and Chao Zeng.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
 arch/arm/dts/Makefile                         |   7 +-
 arch/arm/dts/k3-am65-iot2050-boot-image.dtsi  | 105 +++
 .../dts/k3-am65-iot2050-common-u-boot.dtsi    | 103 +++
 arch/arm/dts/k3-am65-iot2050-common.dtsi      | 655 ++++++++++++++++++
 arch/arm/dts/k3-am65-iot2050-spl.dts          |  16 +
 arch/arm/dts/k3-am6528-iot2050-basic.dts      |  67 ++
 arch/arm/dts/k3-am6548-iot2050-advanced.dts   |  66 ++
 7 files changed, 1018 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/dts/k3-am65-iot2050-boot-image.dtsi
 create mode 100644 arch/arm/dts/k3-am65-iot2050-common-u-boot.dtsi
 create mode 100644 arch/arm/dts/k3-am65-iot2050-common.dtsi
 create mode 100644 arch/arm/dts/k3-am65-iot2050-spl.dts
 create mode 100644 arch/arm/dts/k3-am6528-iot2050-basic.dts
 create mode 100644 arch/arm/dts/k3-am6548-iot2050-advanced.dts

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 096068261d..003bc02633 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1065,7 +1065,12 @@ dtb-$(CONFIG_STM32MP15x) += \
 	stm32mp15xx-dhcom-picoitx.dtb \
 	stm32mp15xx-dhcor-avenger96.dtb
 
-dtb-$(CONFIG_SOC_K3_AM6) += k3-am654-base-board.dtb k3-am654-r5-base-board.dtb
+dtb-$(CONFIG_SOC_K3_AM6) += \
+	k3-am654-base-board.dtb \
+	k3-am654-r5-base-board.dtb \
+	k3-am65-iot2050-spl.dtb \
+	k3-am6528-iot2050-basic.dtb \
+	k3-am6548-iot2050-advanced.dtb
 dtb-$(CONFIG_SOC_K3_J721E) += k3-j721e-common-proc-board.dtb \
 			      k3-j721e-r5-common-proc-board.dtb \
 			      k3-j7200-common-proc-board.dtb \
diff --git a/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi b/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi
new file mode 100644
index 0000000000..61745c6c23
--- /dev/null
+++ b/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) Siemens AG, 2020-2021
+ *
+ * Authors:
+ *   Jan Kiszka <jan.kiszk@siemens.com>
+ */
+
+#include <config.h>
+
+/ {
+	binman {
+		filename = "flash.bin";
+		pad-byte = <0xff>;
+		size = <0x800000>;
+
+		blob-ext@0x000000 {
+			offset = <0x000000>;
+			filename = "tiboot3.bin";
+		};
+
+		blob@0x080000 {
+			offset = <0x080000>;
+			filename = "tispl.bin";
+		};
+
+		fit@0x280000 {
+			description = "U-Boot for IOT2050";
+			offset = <0x280000>;
+			images {
+				u-boot {
+					description = "U-Boot";
+					type = "standalone";
+					arch = "arm64";
+					os = "u-boot";
+					compression = "none";
+					load = <0x80800000>;
+					entry = <0x80800000>;
+					u-boot-nodtb {
+					};
+				};
+
+				fdt-iot2050-basic {
+					description = "k3-am6528-iot2050-basic.dtb";
+					type = "flat_dt";
+					arch = "arm64";
+					compression = "none";
+					blob {
+						filename = "arch/arm/dts/k3-am6528-iot2050-basic.dtb";
+					};
+				};
+
+				fdt-iot2050-advanced {
+					description = "k3-am6548-iot2050-advanced.dtb";
+					type = "flat_dt";
+					arch = "arm64";
+					compression = "none";
+					blob {
+						filename = "arch/arm/dts/k3-am6548-iot2050-advanced.dtb";
+					};
+				};
+			};
+
+			configurations {
+				default = "conf-iot2050-basic";
+
+				conf-iot2050-basic {
+					description = "iot2050-basic";
+					firmware = "u-boot";
+					fdt = "fdt-iot2050-basic";
+				};
+
+				conf-iot2050-advanced {
+					description = "iot2050-advanced";
+					firmware = "u-boot";
+					fdt = "fdt-iot2050-advanced";
+				};
+			};
+		};
+
+		/* primary env */
+		fill@0x680000 {
+			offset = <0x680000>;
+			size   = <0x020000>;
+			fill-byte = [00];
+		};
+		/* secondary env */
+		fill@0x6a0000 {
+			offset = <0x6a0000>;
+			size   = <0x020000>;
+			fill-byte = [00];
+		};
+
+		/* Sysfw Basic */
+		blob-ext@0x6c0000 {
+			offset = <0x6c0000>;
+			filename = "sysfw.itb";
+		};
+		/* Sysfw Advanced */
+		blob-ext@0x740000 {
+			offset = <0x740000>;
+			filename = "sysfw.itb_HS";
+		};
+	};
+};
diff --git a/arch/arm/dts/k3-am65-iot2050-common-u-boot.dtsi b/arch/arm/dts/k3-am65-iot2050-common-u-boot.dtsi
new file mode 100644
index 0000000000..cb5d8532a0
--- /dev/null
+++ b/arch/arm/dts/k3-am65-iot2050-common-u-boot.dtsi
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) Siemens AG, 2018-2021
+ *
+ * Authors:
+ *   Le Jin <le.jin@siemens.com>
+ *   Jan Kiszka <jan.kiszk@siemens.com>
+ *
+ * Common U-Boot bits of the IOT2050 Basic and Advanced variants
+ */
+
+/dts-v1/;
+
+#include "k3-am65-iot2050-common.dtsi"
+
+/ {
+	aliases {
+		spi0 = &ospi0;
+	};
+
+	leds {
+		u-boot,dm-spl;
+		status-led-red {
+			u-boot,dm-spl;
+		};
+		status-led-green {
+			u-boot,dm-spl;
+		};
+	};
+};
+
+&cbass_mcu {
+	u-boot,dm-spl;
+};
+
+&cbass_wakeup {
+	u-boot,dm-spl;
+};
+
+&cbass_main {
+	u-boot,dm-spl;
+	main-navss {
+		u-boot,dm-spl;
+	};
+};
+
+&wkup_pmx0 {
+	u-boot,dm-spl;
+	mcu-fss0-ospi0-pins-default {
+		u-boot,dm-spl;
+	};
+};
+
+&main_pmx0 {
+	u-boot,dm-spl;
+	main-uart1-pins-default {
+		u-boot,dm-spl;
+	};
+};
+
+&main_uart1 {
+	u-boot,dm-spl;
+	current-speed = <115200>;
+};
+
+&wkup_gpio0 {
+	u-boot,dm-spl;
+};
+
+&ospi0 {
+	u-boot,dm-spl;
+	flash@0 {
+		u-boot,dm-spl;
+	};
+};
+
+&secure_proxy_main {
+	u-boot,dm-spl;
+};
+
+&dmsc {
+	u-boot,dm-spl;
+	k3_sysreset: sysreset-controller {
+		compatible = "ti,sci-sysreset";
+		u-boot,dm-spl;
+	};
+};
+
+&k3_pds {
+	u-boot,dm-spl;
+};
+
+&k3_clks {
+	u-boot,dm-spl;
+};
+
+&k3_reset {
+	u-boot,dm-spl;
+};
+
+&fss {
+	u-boot,dm-spl;
+};
diff --git a/arch/arm/dts/k3-am65-iot2050-common.dtsi b/arch/arm/dts/k3-am65-iot2050-common.dtsi
new file mode 100644
index 0000000000..de763ca925
--- /dev/null
+++ b/arch/arm/dts/k3-am65-iot2050-common.dtsi
@@ -0,0 +1,655 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) Siemens AG, 2018-2021
+ *
+ * Authors:
+ *   Le Jin <le.jin@siemens.com>
+ *   Jan Kiszka <jan.kiszk@siemens.com>
+ *
+ * Common bits of the IOT2050 Basic and Advanced variants
+ */
+
+/dts-v1/;
+
+#include "k3-am654.dtsi"
+#include <dt-bindings/phy/phy.h>
+
+/ {
+	aliases {
+		spi0 = &mcu_spi0;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+		bootargs = "earlycon=ns16550a,mmio32,0x02810000";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: secure-ddr@9e800000 {
+			reg = <0 0x9e800000 0 0x01800000>; /* for OP-TEE */
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa0000000 0 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa0100000 0 0xf00000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa1000000 0 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa1100000 0 0xf00000>;
+			no-map;
+		};
+
+		rtos_ipc_memory_region: ipc-memories@a2000000 {
+			reg = <0x00 0xa2000000 0x00 0x00200000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins_default>;
+
+		status-led-red {
+			gpios = <&wkup_gpio0 32 GPIO_ACTIVE_HIGH>;
+			panic-indicator;
+		};
+
+		status-led-green {
+			gpios = <&wkup_gpio0 24 GPIO_ACTIVE_HIGH>;
+		};
+
+		user-led1-red {
+			gpios = <&pcal9535_3 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		user-led1-green {
+			gpios = <&pcal9535_2 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		user-led2-red {
+			gpios = <&wkup_gpio0 17 GPIO_ACTIVE_HIGH>;
+		};
+
+		user-led2-green {
+			gpios = <&wkup_gpio0 22 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	dp_refclk: clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <19200000>;
+	};
+};
+
+&wkup_pmx0 {
+	wkup_i2c0_pins_default: wkup-i2c0-pins-default {
+		pinctrl-single,pins = <
+			/* (AC7) WKUP_I2C0_SCL */
+			AM65X_WKUP_IOPAD(0x00e0, PIN_INPUT,  0)
+			/* (AD6) WKUP_I2C0_SDA */
+			AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT,  0)
+		>;
+	};
+
+	mcu_i2c0_pins_default: mcu-i2c0-pins-default {
+		pinctrl-single,pins = <
+			/* (AD8) MCU_I2C0_SCL */
+			AM65X_WKUP_IOPAD(0x00e8, PIN_INPUT,  0)
+			/* (AD7) MCU_I2C0_SDA */
+			AM65X_WKUP_IOPAD(0x00ec, PIN_INPUT,  0)
+		>;
+	};
+
+	arduino_i2c_aio_switch_pins_default: arduino-i2c-aio-switch-pins-default {
+		pinctrl-single,pins = <
+			/* (R2) WKUP_GPIO0_21 */
+			AM65X_WKUP_IOPAD(0x0024, PIN_OUTPUT, 7)
+		>;
+	};
+
+	push_button_pins_default: push-button-pins-default {
+		pinctrl-single,pins = <
+			/* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */
+			AM65X_WKUP_IOPAD(0x0034, PIN_INPUT,  7)
+		>;
+	};
+
+	arduino_uart_pins_default: arduino-uart-pins-default {
+		pinctrl-single,pins = <
+			/* (P4) MCU_UART0_RXD */
+			AM65X_WKUP_IOPAD(0x0044, PIN_INPUT,  4)
+			/* (P5) MCU_UART0_TXD */
+			AM65X_WKUP_IOPAD(0x0048, PIN_OUTPUT, 4)
+		>;
+	};
+
+	arduino_io_d2_to_d3_pins_default: arduino-io-d2-to-d3-pins-default {
+		pinctrl-single,pins = <
+			/* (P1) WKUP_GPIO0_31 */
+			AM65X_WKUP_IOPAD(0x004C, PIN_OUTPUT, 7)
+			/* (N3) WKUP_GPIO0_33 */
+			AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 7)
+		>;
+	};
+
+	arduino_io_oe_pins_default: arduino-io-oe-pins-default {
+		pinctrl-single,pins = <
+			/* (N4) WKUP_GPIO0_34 */
+			AM65X_WKUP_IOPAD(0x0058, PIN_OUTPUT, 7)
+			/* (M2) WKUP_GPIO0_36 */
+			AM65X_WKUP_IOPAD(0x0060, PIN_OUTPUT, 7)
+			/* (M3) WKUP_GPIO0_37 */
+			AM65X_WKUP_IOPAD(0x0064, PIN_OUTPUT, 7)
+			/* (M4) WKUP_GPIO0_38 */
+			AM65X_WKUP_IOPAD(0x0068, PIN_OUTPUT, 7)
+			/* (M1) WKUP_GPIO0_41 */
+			AM65X_WKUP_IOPAD(0x0074, PIN_OUTPUT, 7)
+		>;
+	};
+
+	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default {
+		pinctrl-single,pins = <
+			/* (V1) MCU_OSPI0_CLK */
+			AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0)
+			/* (U2) MCU_OSPI0_DQS */
+			AM65X_WKUP_IOPAD(0x0008, PIN_INPUT,  0)
+			/* (U4) MCU_OSPI0_D0 */
+			AM65X_WKUP_IOPAD(0x000c, PIN_INPUT,  0)
+			/* (U5) MCU_OSPI0_D1 */
+			AM65X_WKUP_IOPAD(0x0010, PIN_INPUT,  0)
+			/* (R4) MCU_OSPI0_CSn0 */
+			AM65X_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0)
+		>;
+	};
+
+	db9_com_mode_pins_default: db9-com-mode-pins-default {
+		pinctrl-single,pins = <
+			/* (AD3) WKUP_GPIO0_5, used as uart0 mode 0 */
+			AM65X_WKUP_IOPAD(0x00c4, PIN_OUTPUT, 7)
+			/* (AC3) WKUP_GPIO0_4, used as uart0 mode 1 */
+			AM65X_WKUP_IOPAD(0x00c0, PIN_OUTPUT, 7)
+			/* (AC1) WKUP_GPIO0_7, used as uart0 term */
+			AM65X_WKUP_IOPAD(0x00cc, PIN_OUTPUT, 7)
+			/* (AC2) WKUP_GPIO0_6, used as uart0 en */
+			AM65X_WKUP_IOPAD(0x00c8, PIN_OUTPUT, 7)
+		>;
+	};
+
+	leds_pins_default: leds-pins-default {
+		pinctrl-single,pins = <
+			/* (T2) WKUP_GPIO0_17, used as user led1 red */
+			AM65X_WKUP_IOPAD(0x0014, PIN_OUTPUT, 7)
+			/* (R3) WKUP_GPIO0_22, used as user led1 green */
+			AM65X_WKUP_IOPAD(0x0028, PIN_OUTPUT, 7)
+			/* (R5) WKUP_GPIO0_24, used as status led red */
+			AM65X_WKUP_IOPAD(0x0030, PIN_OUTPUT, 7)
+			/* (N2) WKUP_GPIO0_32, used as status led green */
+			AM65X_WKUP_IOPAD(0x0050, PIN_OUTPUT, 7)
+		>;
+	};
+
+	mcu_spi0_pins_default: mcu-spi0-pins-default {
+		pinctrl-single,pins = <
+			/* (Y1) MCU_SPI0_CLK */
+			AM65X_WKUP_IOPAD(0x0090, PIN_INPUT,  0)
+			/* (Y3) MCU_SPI0_D0 */
+			AM65X_WKUP_IOPAD(0x0094, PIN_INPUT,  0)
+			/* (Y2) MCU_SPI0_D1 */
+			AM65X_WKUP_IOPAD(0x0098, PIN_INPUT,  0)
+			/* (Y4) MCU_SPI0_CS0 */
+			AM65X_WKUP_IOPAD(0x009c, PIN_OUTPUT, 0)
+		>;
+	};
+
+	minipcie_pins_default: minipcie-pins-default {
+		pinctrl-single,pins = <
+			/* (P2) MCU_OSPI1_DQS.WKUP_GPIO0_27 */
+			AM65X_WKUP_IOPAD(0x003C, PIN_OUTPUT, 7)
+		>;
+	};
+};
+
+&main_pmx0 {
+	main_uart1_pins_default: main-uart1-pins-default {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0174, PIN_INPUT,  6)  /* (AE23) UART1_RXD */
+			AM65X_IOPAD(0x014c, PIN_OUTPUT, 6)  /* (AD23) UART1_TXD */
+			AM65X_IOPAD(0x0178, PIN_INPUT,  6)  /* (AD22) UART1_CTSn */
+			AM65X_IOPAD(0x017c, PIN_OUTPUT, 6)  /* (AC21) UART1_RTSn */
+		>;
+	};
+
+	main_i2c3_pins_default: main-i2c3-pins-default {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x01c0, PIN_INPUT,  2)  /* (AF13) I2C3_SCL */
+			AM65X_IOPAD(0x01d4, PIN_INPUT,  2)  /* (AG12) I2C3_SDA */
+		>;
+	};
+
+	main_mmc1_pins_default: main-mmc1-pins-default {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0)  /* (C27) MMC1_CLK */
+			AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP,   0)  /* (C28) MMC1_CMD */
+			AM65X_IOPAD(0x02d0, PIN_INPUT_PULLUP,   0)  /* (D28) MMC1_DAT0 */
+			AM65X_IOPAD(0x02cc, PIN_INPUT_PULLUP,   0)  /* (E27) MMC1_DAT1 */
+			AM65X_IOPAD(0x02c8, PIN_INPUT_PULLUP,   0)  /* (D26) MMC1_DAT2 */
+			AM65X_IOPAD(0x02c4, PIN_INPUT_PULLUP,   0)  /* (D27) MMC1_DAT3 */
+			AM65X_IOPAD(0x02dc, PIN_INPUT_PULLUP,   0)  /* (B24) MMC1_SDCD */
+			AM65X_IOPAD(0x02e0, PIN_INPUT_PULLUP,   0)  /* (C24) MMC1_SDWP */
+		>;
+	};
+
+	usb0_pins_default: usb0-pins-default {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x02bc, PIN_OUTPUT, 0)  /* (AD9) USB0_DRVVBUS */
+		>;
+	};
+
+	usb1_pins_default: usb1-pins-default {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0)  /* (AC8) USB1_DRVVBUS */
+		>;
+	};
+
+	arduino_io_d4_to_d9_pins_default: arduino-io-d4-to-d9-pins-default {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0084, PIN_OUTPUT, 7)  /* (AG18) GPIO0_33 */
+			AM65X_IOPAD(0x008C, PIN_OUTPUT, 7)  /* (AF17) GPIO0_35 */
+			AM65X_IOPAD(0x0098, PIN_OUTPUT, 7)  /* (AH16) GPIO0_38 */
+			AM65X_IOPAD(0x00AC, PIN_OUTPUT, 7)  /* (AH15) GPIO0_43 */
+			AM65X_IOPAD(0x00C0, PIN_OUTPUT, 7)  /* (AG15) GPIO0_48 */
+			AM65X_IOPAD(0x00CC, PIN_OUTPUT, 7)  /* (AD15) GPIO0_51 */
+		>;
+	};
+
+	dss_vout1_pins_default: dss-vout1-pins-default {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0000, PIN_OUTPUT, 1)  /* VOUT1_DATA0 */
+			AM65X_IOPAD(0x0004, PIN_OUTPUT, 1)  /* VOUT1_DATA1 */
+			AM65X_IOPAD(0x0008, PIN_OUTPUT, 1)  /* VOUT1_DATA2 */
+			AM65X_IOPAD(0x000c, PIN_OUTPUT, 1)  /* VOUT1_DATA3 */
+			AM65X_IOPAD(0x0010, PIN_OUTPUT, 1)  /* VOUT1_DATA4 */
+			AM65X_IOPAD(0x0014, PIN_OUTPUT, 1)  /* VOUT1_DATA5 */
+			AM65X_IOPAD(0x0018, PIN_OUTPUT, 1)  /* VOUT1_DATA6 */
+			AM65X_IOPAD(0x001c, PIN_OUTPUT, 1)  /* VOUT1_DATA7 */
+			AM65X_IOPAD(0x0020, PIN_OUTPUT, 1)  /* VOUT1_DATA8 */
+			AM65X_IOPAD(0x0024, PIN_OUTPUT, 1)  /* VOUT1_DATA9 */
+			AM65X_IOPAD(0x0028, PIN_OUTPUT, 1)  /* VOUT1_DATA10 */
+			AM65X_IOPAD(0x002c, PIN_OUTPUT, 1)  /* VOUT1_DATA11 */
+			AM65X_IOPAD(0x0030, PIN_OUTPUT, 1)  /* VOUT1_DATA12 */
+			AM65X_IOPAD(0x0034, PIN_OUTPUT, 1)  /* VOUT1_DATA13 */
+			AM65X_IOPAD(0x0038, PIN_OUTPUT, 1)  /* VOUT1_DATA14 */
+			AM65X_IOPAD(0x003c, PIN_OUTPUT, 1)  /* VOUT1_DATA15 */
+			AM65X_IOPAD(0x0040, PIN_OUTPUT, 1)  /* VOUT1_DATA16 */
+			AM65X_IOPAD(0x0044, PIN_OUTPUT, 1)  /* VOUT1_DATA17 */
+			AM65X_IOPAD(0x0048, PIN_OUTPUT, 1)  /* VOUT1_DATA18 */
+			AM65X_IOPAD(0x004c, PIN_OUTPUT, 1)  /* VOUT1_DATA19 */
+			AM65X_IOPAD(0x0050, PIN_OUTPUT, 1)  /* VOUT1_DATA20 */
+			AM65X_IOPAD(0x0054, PIN_OUTPUT, 1)  /* VOUT1_DATA21 */
+			AM65X_IOPAD(0x0058, PIN_OUTPUT, 1)  /* VOUT1_DATA22 */
+			AM65X_IOPAD(0x005c, PIN_OUTPUT, 1)  /* VOUT1_DATA23 */
+			AM65X_IOPAD(0x0060, PIN_OUTPUT, 1)  /* VOUT1_VSYNC */
+			AM65X_IOPAD(0x0064, PIN_OUTPUT, 1)  /* VOUT1_HSYNC */
+			AM65X_IOPAD(0x0068, PIN_OUTPUT, 1)  /* VOUT1_PCLK */
+			AM65X_IOPAD(0x006c, PIN_OUTPUT, 1)  /* VOUT1_DE */
+		>;
+	};
+
+	dp_pins_default: dp-pins-default {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0078, PIN_OUTPUT, 7)  /* (AF18) DP rst_n */
+		>;
+	};
+
+	main_i2c2_pins_default: main-i2c2-pins-default {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0074, PIN_INPUT,  5)  /* (T27) I2C2_SCL */
+			AM65X_IOPAD(0x0070, PIN_INPUT,  5)  /* (R25) I2C2_SDA */
+		>;
+	};
+};
+
+&main_pmx1 {
+	main_i2c0_pins_default: main-i2c0-pins-default {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0000, PIN_INPUT,  0)  /* (D20) I2C0_SCL */
+			AM65X_IOPAD(0x0004, PIN_INPUT,  0)  /* (C21) I2C0_SDA */
+		>;
+	};
+
+	main_i2c1_pins_default: main-i2c1-pins-default {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0008, PIN_INPUT,  0)  /* (B21) I2C1_SCL */
+			AM65X_IOPAD(0x000c, PIN_INPUT,  0)  /* (E21) I2C1_SDA */
+		>;
+	};
+
+	ecap0_pins_default: ecap0-pins-default {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0010, PIN_INPUT,  0)  /* (D21) ECAP0_IN_APWM_OUT */
+		>;
+	};
+};
+
+&wkup_uart0 {
+	/* Wakeup UART is used by System firmware */
+	status = "reserved";
+};
+
+&main_uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart1_pins_default>;
+};
+
+&main_uart2 {
+	status = "disabled";
+};
+
+&mcu_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&arduino_uart_pins_default>;
+};
+
+&main_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&arduino_io_d4_to_d9_pins_default>;
+	gpio-line-names =
+		"main_gpio0-base", "", "", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "", "", "",
+		"", "", "", "IO4", "", "IO5", "", "", "IO6", "",
+		"", "", "", "IO7", "", "", "", "", "IO8", "",
+		"", "IO9";
+};
+
+&wkup_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&arduino_io_d2_to_d3_pins_default
+		&arduino_i2c_aio_switch_pins_default
+		&arduino_io_oe_pins_default
+		&push_button_pins_default
+		&db9_com_mode_pins_default
+	>;
+	gpio-line-names =
+		/* 0..9 */
+		"wkup_gpio0-base", "", "", "", "UART0-mode1", "UART0-mode0",
+		"UART0-enable", "UART0-terminate", "", "WIFI-disable",
+		/* 10..19 */
+		"", "", "", "", "", "", "", "", "", "",
+		/* 20..29 */
+		"", "A4A5-I2C-mux", "", "", "", "USER-button", "", "", "","IO0",
+		/* 30..39 */
+		"IO1", "IO2", "", "IO3", "IO17-direction", "A5",
+		"IO16-direction", "IO15-direction", "IO14-direction", "A3",
+		/* 40..49 */
+		"", "IO18-direction", "A4", "A2", "A1", "A0", "", "", "IO13",
+		"IO11",
+		/* 50..51 */
+		"IO12", "IO10";
+};
+
+&wkup_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_i2c0_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&mcu_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	psu: regulator@60 {
+		compatible = "ti,tps62363";
+		reg =  <0x60>;
+		regulator-name = "tps62363-vout";
+		regulator-min-microvolt = <500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-boot-on;
+		ti,vsel0-state-high;
+		ti,vsel1-state-high;
+		ti,enable-vout-discharge;
+	};
+
+	/* D4200 */
+	pcal9535_1: gpio@20 {
+		compatible = "nxp,pcal9535";
+		reg = <0x20>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names =
+			"A0-pull", "A1-pull", "A2-pull", "A3-pull", "A4-pull",
+			"A5-pull", "", "",
+			"IO14-enable", "IO15-enable", "IO16-enable",
+			"IO17-enable", "IO18-enable", "IO19-enable";
+	};
+
+	/* D4201 */
+	pcal9535_2: gpio@21 {
+		compatible = "nxp,pcal9535";
+		reg = <0x21>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names =
+			"IO0-direction", "IO1-direction", "IO2-direction",
+			"IO3-direction", "IO4-direction", "IO5-direction",
+			"IO6-direction", "IO7-direction",
+			"IO8-direction", "IO9-direction", "IO10-direction",
+			"IO11-direction", "IO12-direction", "IO13-direction",
+			"IO19-direction";
+	};
+
+	/* D4202 */
+	pcal9535_3: gpio@25 {
+		compatible = "nxp,pcal9535";
+		reg = <0x25>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names =
+			"IO0-pull", "IO1-pull", "IO2-pull", "IO3-pull",
+			"IO4-pull", "IO5-pull", "IO6-pull", "IO7-pull",
+			"IO8-pull", "IO9-pull", "IO10-pull", "IO11-pull",
+			"IO12-pull", "IO13-pull";
+	};
+};
+
+&main_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	rtc: rtc8564@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	eeprom: eeprom@54 {
+		compatible = "atmel,24c08";
+		reg = <0x54>;
+		pagesize = <16>;
+	};
+};
+
+&main_i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c1_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&main_i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c2_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&main_i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c3_pins_default>;
+	clock-frequency = <400000>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	edp-bridge@f {
+		compatible = "toshiba,tc358767";
+		reg = <0x0f>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dp_pins_default>;
+		reset-gpios = <&main_gpio0 30 GPIO_ACTIVE_HIGH>;
+
+		clock-names = "ref";
+		clocks = <&dp_refclk>;
+
+		toshiba,hpd-pin = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+
+				bridge_in: endpoint {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+		};
+	};
+};
+
+&mcu_cpsw {
+	status = "disabled";
+};
+
+&ecap0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ecap0_pins_default>;
+};
+
+&sdhci1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins_default>;
+	dr_mode = "host";
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins_default>;
+	dr_mode = "host";
+};
+
+&mcu_spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_spi0_pins_default>;
+
+	#address-cells = <1>;
+	#size-cells= <0>;
+	ti,pindir-d0-out-d1-in = <1>;
+};
+
+&tscadc0 {
+	status = "disabled";
+};
+
+&tscadc1 {
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5>;
+	};
+};
+
+&ospi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <1>;
+		spi-max-frequency = <50000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&dss {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_vout1_pins_default>;
+
+	assigned-clocks = <&k3_clks 67 2>;
+	assigned-clock-parents = <&k3_clks 67 5>;
+};
+
+&dss_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	port@1 {
+		reg = <1>;
+
+		dpi_out: endpoint {
+			remote-endpoint = <&bridge_in>;
+		};
+	};
+};
+
+&serdes0 {
+	status = "disabled";
+};
+
+&pcie0_rc {
+	status = "disabled";
+};
+
+&pcie0_ep {
+	status = "disabled";
+};
+
+&pcie1_rc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&minipcie_pins_default>;
+
+	num-lanes = <1>;
+	phys = <&serdes1 PHY_TYPE_PCIE 0>;
+	phy-names = "pcie-phy0";
+	reset-gpios = <&wkup_gpio0 27 GPIO_ACTIVE_HIGH>;
+};
+
+&pcie1_ep {
+	status = "disabled";
+};
diff --git a/arch/arm/dts/k3-am65-iot2050-spl.dts b/arch/arm/dts/k3-am65-iot2050-spl.dts
new file mode 100644
index 0000000000..b6bd148fd3
--- /dev/null
+++ b/arch/arm/dts/k3-am65-iot2050-spl.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) Siemens AG, 2018-2021
+ *
+ * Authors:
+ *   Jan Kiszka <jan.kiszk@siemens.com>
+ */
+
+/dts-v1/;
+
+#include "k3-am65-iot2050-common-u-boot.dtsi"
+
+/ {
+	compatible = "siemens,iot2050", "ti,am654";
+	model = "Siemens IOT2050";
+};
diff --git a/arch/arm/dts/k3-am6528-iot2050-basic.dts b/arch/arm/dts/k3-am6528-iot2050-basic.dts
new file mode 100644
index 0000000000..4d1dd69719
--- /dev/null
+++ b/arch/arm/dts/k3-am6528-iot2050-basic.dts
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) Siemens AG, 2018-2021
+ *
+ * Authors:
+ *   Le Jin <le.jin@siemens.com>
+ *   Jan Kiszka <jan.kiszk@siemens.com>
+ *
+ * AM6528-based (dual-core) IOT2050 Basic variant
+ * 1 GB RAM, no eMMC, main_uart0 on connector X30
+ */
+
+/dts-v1/;
+
+#include "k3-am65-iot2050-common-u-boot.dtsi"
+#include "k3-am65-iot2050-boot-image.dtsi"
+
+/ {
+	compatible = "siemens,iot2050-basic", "ti,am654";
+	model = "SIMATIC IOT2050 Basic";
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 1G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x40000000>;
+	};
+
+	cpus {
+		cpu-map {
+			/delete-node/ cluster1;
+		};
+		/delete-node/ cpu@100;
+		/delete-node/ cpu@101;
+	};
+
+	/delete-node/ l2-cache1;
+};
+
+/* eMMC */
+&sdhci0 {
+	status = "disabled";
+};
+
+&main_pmx0 {
+	main_uart0_pins_default: main-uart0-pins-default {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x01e4, PIN_INPUT,  0)  /* (AF11) UART0_RXD */
+			AM65X_IOPAD(0x01e8, PIN_OUTPUT, 0)  /* (AE11) UART0_TXD */
+			AM65X_IOPAD(0x01ec, PIN_INPUT,  0)  /* (AG11) UART0_CTSn */
+			AM65X_IOPAD(0x01f0, PIN_OUTPUT, 0)  /* (AD11) UART0_RTSn */
+			AM65X_IOPAD(0x0188, PIN_INPUT,  1)  /* (D25) UART0_DCDn */
+			AM65X_IOPAD(0x018c, PIN_INPUT,  1)  /* (B26) UART0_DSRn */
+			AM65X_IOPAD(0x0190, PIN_OUTPUT, 1)  /* (A24) UART0_DTRn */
+			AM65X_IOPAD(0x0194, PIN_INPUT,  1)  /* (E24) UART0_RIN */
+		>;
+	};
+};
+
+&main_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+};
+
+&mcu_r5fss0 {
+	/* lock-step mode not supported on this board */
+	ti,cluster-mode = <0>;
+};
diff --git a/arch/arm/dts/k3-am6548-iot2050-advanced.dts b/arch/arm/dts/k3-am6548-iot2050-advanced.dts
new file mode 100644
index 0000000000..cd3e93fce1
--- /dev/null
+++ b/arch/arm/dts/k3-am6548-iot2050-advanced.dts
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) Siemens AG, 2018-2021
+ *
+ * Authors:
+ *   Le Jin <le.jin@siemens.com>
+ *   Jan Kiszka <jan.kiszk@siemens.com>
+ *
+ * AM6548-based (quad-core) IOT2050 Advanced variant
+ * 2 GB RAM, 16 GB eMMC, USB-serial converter on connector X30
+ */
+
+/dts-v1/;
+
+#include "k3-am65-iot2050-common-u-boot.dtsi"
+#include "k3-am65-iot2050-boot-image.dtsi"
+
+/ {
+	compatible = "siemens,iot2050-advanced", "ti,am654";
+	model = "SIMATIC IOT2050 Advanced";
+
+	aliases {
+		mmc0 = &sdhci1;
+		mmc1 = &sdhci0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 2G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+	};
+};
+
+&main_pmx0 {
+	main_mmc0_pins_default: main-mmc0-pins-default {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0)  /* (B25) MMC0_CLK */
+			AM65X_IOPAD(0x01ac, PIN_INPUT_PULLUP,   0)  /* (B27) MMC0_CMD */
+			AM65X_IOPAD(0x01a4, PIN_INPUT_PULLUP,   0)  /* (A26) MMC0_DAT0 */
+			AM65X_IOPAD(0x01a0, PIN_INPUT_PULLUP,   0)  /* (E25) MMC0_DAT1 */
+			AM65X_IOPAD(0x019c, PIN_INPUT_PULLUP,   0)  /* (C26) MMC0_DAT2 */
+			AM65X_IOPAD(0x0198, PIN_INPUT_PULLUP,   0)  /* (A25) MMC0_DAT3 */
+			AM65X_IOPAD(0x0194, PIN_INPUT_PULLUP,   0)  /* (E24) MMC0_DAT4 */
+			AM65X_IOPAD(0x0190, PIN_INPUT_PULLUP,   0)  /* (A24) MMC0_DAT5 */
+			AM65X_IOPAD(0x018c, PIN_INPUT_PULLUP,   0)  /* (B26) MMC0_DAT6 */
+			AM65X_IOPAD(0x0188, PIN_INPUT_PULLUP,   0)  /* (D25) MMC0_DAT7 */
+			AM65X_IOPAD(0x01b8, PIN_OUTPUT_PULLUP,  7)  /* (B23) MMC0_SDWP */
+			AM65X_IOPAD(0x01b4, PIN_INPUT_PULLUP,   0)  /* (A23) MMC0_SDCD */
+			AM65X_IOPAD(0x01b0, PIN_INPUT,          0)  /* (C25) MMC0_DS */
+		>;
+	};
+};
+
+/* eMMC */
+&sdhci0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc0_pins_default>;
+	bus-width = <8>;
+	non-removable;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&main_uart0 {
+	status = "disabled";
+};
-- 
2.26.2

[PATCH v3 2/5] board: siemens: Add support for SIMATIC IOT2050 devices

[Jan Kiszka]

From: Jan Kiszka <jan.kiszka@siemens.com>

This adds support for the IOT2050 Basic and Advanced devices. The Basic
used the dual-core AM6528 GP processor, the Advanced one the AM6548 HS
quad-core version.

Both variants are booted via a Siemens-provided FSBL that runs on the R5
cores. Consequently, U-Boot support is targeting the A53 cores. U-Boot
SPL, ATF and TEE have to reside in SPI flash.

Full integration into a bootable image can be found on
https://github.com/siemens/meta-iot2050

Based on original board support by Le Jin, Gao Nian and Chao Zeng.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
 arch/arm/mach-k3/Kconfig          |   1 +
 board/siemens/iot2050/Kconfig     |  32 ++++
 board/siemens/iot2050/MAINTAINERS |   8 +
 board/siemens/iot2050/Makefile    |  10 ++
 board/siemens/iot2050/README      |  65 +++++++
 board/siemens/iot2050/board.c     | 278 ++++++++++++++++++++++++++++++
 board/siemens/iot2050/config.mk   |   8 +
 configs/iot2050_defconfig         | 140 +++++++++++++++
 include/configs/iot2050.h         |  60 +++++++
 9 files changed, 602 insertions(+)
 create mode 100644 board/siemens/iot2050/Kconfig
 create mode 100644 board/siemens/iot2050/MAINTAINERS
 create mode 100644 board/siemens/iot2050/Makefile
 create mode 100644 board/siemens/iot2050/README
 create mode 100644 board/siemens/iot2050/board.c
 create mode 100644 board/siemens/iot2050/config.mk
 create mode 100644 configs/iot2050_defconfig
 create mode 100644 include/configs/iot2050.h

diff --git a/arch/arm/mach-k3/Kconfig b/arch/arm/mach-k3/Kconfig
index bfbce44bfa..a082460e04 100644
--- a/arch/arm/mach-k3/Kconfig
+++ b/arch/arm/mach-k3/Kconfig
@@ -150,4 +150,5 @@ config SYS_K3_SPL_ATF
 source "board/ti/am65x/Kconfig"
 source "board/ti/am64x/Kconfig"
 source "board/ti/j721e/Kconfig"
+source "board/siemens/iot2050/Kconfig"
 endif
diff --git a/board/siemens/iot2050/Kconfig b/board/siemens/iot2050/Kconfig
new file mode 100644
index 0000000000..8f634c172c
--- /dev/null
+++ b/board/siemens/iot2050/Kconfig
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (c) Siemens AG, 2018-2021
+#
+# Authors:
+#   Le Jin <le.jin@siemens.com>
+#   Jan Kiszka <jan.kiszka@siemens.com>
+
+config TARGET_IOT2050_A53
+	bool "IOT2050 running on A53"
+	select ARM64
+	select SOC_K3_AM6
+	select BOARD_LATE_INIT
+	select SYS_DISABLE_DCACHE_OPS
+	select BINMAN
+
+if TARGET_IOT2050_A53
+
+config SYS_BOARD
+	default "iot2050"
+
+config SYS_VENDOR
+	default "siemens"
+
+config SYS_CONFIG_NAME
+	default "iot2050"
+
+config IOT2050_BOOT_SWITCH
+	bool "Disable eMMC boot via USER button (Advanced version only)"
+	default y
+
+endif
diff --git a/board/siemens/iot2050/MAINTAINERS b/board/siemens/iot2050/MAINTAINERS
new file mode 100644
index 0000000000..028fd22960
--- /dev/null
+++ b/board/siemens/iot2050/MAINTAINERS
@@ -0,0 +1,8 @@
+IOT2050 BOARD
+M:	Le Jin <le.jin@siemens.com>
+M:	Jan Kiszka <jan.kiszka@siemens.com>
+S:	Maintained
+F:	board/siemens/iot2050/
+F:	include/configs/iot2050.h
+F:	configs/iot2050_defconfig
+F:	arch/arm/dts/iot2050-*
diff --git a/board/siemens/iot2050/Makefile b/board/siemens/iot2050/Makefile
new file mode 100644
index 0000000000..619594ab8e
--- /dev/null
+++ b/board/siemens/iot2050/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Makefile for Siemens IOT2050 board
+# Copyright (c) Siemens AG, 2018-2021
+#
+# Authors:
+#   Le Jin <le.jin@siemens.com>
+#
+
+obj-y += board.o
diff --git a/board/siemens/iot2050/README b/board/siemens/iot2050/README
new file mode 100644
index 0000000000..b63f05b5cf
--- /dev/null
+++ b/board/siemens/iot2050/README
@@ -0,0 +1,65 @@
+SIMATIC IOT2050 BASIC and ADVANCED
+==================================
+
+The SIMATIC IOT2050 is an open industrial IoT gateway that is using the TI
+AM6528 GP (Basic variant) or the AM6548 HS (Advanced variant). The Advanced
+variant is prepared for secure boot.
+
+The IOT2050 starts only from OSPI. It loads a Siemens-provided bootloader
+called SE-Boot for the MCU domain (R5F cores), then hands over to ATF and
+OP-TEE, before booting U-Boot on the A53 cores. This describes how to build all
+open artifacts into a flashable image for the OSPI flash. The flash image will
+work on both variants.
+
+
+Dependencies
+------------
+
+ATF:    Upstream release 2.4 or newer
+OP-TEE: Upstream release 3.10.0 or newer
+
+Binary dependencies can be found in
+https://github.com/siemens/meta-iot2050/tree/master/recipes-bsp/u-boot/files/prebuild.
+The following binaries from that source need to be present in the build folder:
+
+ - tiboot3.bin
+ - sysfw.itb
+ - sysfw.itb_HS
+
+
+Building
+--------
+
+Make sure that CROSS_COMPILE is set appropriately:
+
+    export CROSS_COMPILE=aarch64-linux-gnu-
+
+ATF:
+
+    make PLAT=k3 SPD=opteed K3_USART=1
+
+OP-TEE:
+
+    make PLATFORM=k3-am65x CFG_ARM64_core=y \
+         CFG_TEE_CORE_LOG_LEVEL=2 CFG_CONSOLE_UART=1
+
+U-Boot:
+
+    export ATF=/path/to/bl31.bin
+    export TEE=/path/to/tee-pager_v2.bin
+    make iot2050_defconfig
+    make
+
+
+Flashing
+--------
+
+Via U-Boot:
+
+    sf probe
+    load mmc 0:1 $loadaddr /path/to/flash.bin
+    sf update $loadaddr 0x0 $filesize
+
+Via external programmer Dediprog SF100 or SF600:
+
+    dpcmd --vcc 2 -v -u flash.bin
diff --git a/board/siemens/iot2050/board.c b/board/siemens/iot2050/board.c
new file mode 100644
index 0000000000..feb8d6306b
--- /dev/null
+++ b/board/siemens/iot2050/board.c
@@ -0,0 +1,278 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Board specific initialization for IOT2050
+ * Copyright (c) Siemens AG, 2018-2021
+ *
+ * Authors:
+ *   Le Jin <le.jin@siemens.com>
+ *   Jan Kiszka <jan.kiszka@siemens.com>
+ */
+
+#include <common.h>
+#include <bootstage.h>
+#include <dm.h>
+#include <i2c.h>
+#include <led.h>
+#include <net.h>
+#include <phy.h>
+#include <spl.h>
+#include <version.h>
+#include <linux/delay.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/hardware.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+
+#define IOT2050_INFO_MAGIC		0x20502050
+
+struct iot2050_info {
+	u32 magic;
+	u16 size;
+	char name[20 + 1];
+	char serial[16 + 1];
+	char mlfb[18 + 1];
+	char uuid[32 + 1];
+	char a5e[18 + 1];
+	u8 mac_addr_cnt;
+	u8 mac_addr[8][ARP_HLEN];
+	char seboot_version[40 + 1];
+} __packed;
+
+/*
+ * Scratch SRAM (available before DDR RAM) contains extracted EEPROM data.
+ */
+#define IOT2050_INFO_DATA ((struct iot2050_info *) \
+			     TI_SRAM_SCRATCH_BOARD_EEPROM_START)
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static bool board_is_advanced(void)
+{
+	struct iot2050_info *info = IOT2050_INFO_DATA;
+
+	return info->magic == IOT2050_INFO_MAGIC &&
+		!strcmp((char *)info->name, "IOT2050-ADVANCED");
+}
+
+static void remove_mmc1_target(void)
+{
+	const char *boot_targets = env_get("boot_targets");
+
+	if (strncmp(boot_targets, "mmc1 ", 5) == 0)
+		env_set("boot_targets", boot_targets + 5);
+}
+
+void set_board_info_env(void)
+{
+	struct iot2050_info *info = IOT2050_INFO_DATA;
+	u8 __maybe_unused mac_cnt;
+
+	if (info->magic != IOT2050_INFO_MAGIC) {
+		pr_err("IOT2050: Board info parsing error!\n");
+		return;
+	}
+
+	if (env_get("board_uuid"))
+		return;
+
+	env_set("board_name", info->name);
+	env_set("board_serial", info->serial);
+	env_set("mlfb", info->mlfb);
+	env_set("board_uuid", info->uuid);
+	env_set("board_a5e", info->a5e);
+	env_set("fw_version", PLAIN_VERSION);
+	env_set("seboot_version", info->seboot_version);
+
+	if (IS_ENABLED(CONFIG_NET)) {
+		/* MAC address */
+		for (mac_cnt = 0; mac_cnt < info->mac_addr_cnt; mac_cnt++) {
+			if (is_valid_ethaddr(info->mac_addr[mac_cnt]))
+				eth_env_set_enetaddr_by_index("eth",
+							      mac_cnt + 1,
+							      info->mac_addr[mac_cnt]);
+		}
+
+		/*
+		 * Set the MAC address environment variable that ICSSG0-PRU eth0 will
+		 * use in u-boot
+		 */
+		env_set("ethaddr", env_get("eth1addr"));
+	}
+
+	if (board_is_advanced()) {
+		env_set("fdtfile", "ti/k3-am6548-iot2050-advanced.dtb");
+	} else {
+		env_set("fdtfile", "ti/k3-am6528-iot2050-basic.dtb");
+		/* remove the unavailable eMMC (mmc1) from the list */
+		remove_mmc1_target();
+	}
+
+	env_save();
+}
+
+int board_init(void)
+{
+	return 0;
+}
+
+int dram_init(void)
+{
+	if (board_is_advanced())
+		gd->ram_size = SZ_2G;
+	else
+		gd->ram_size = SZ_1G;
+
+	return 0;
+}
+
+int dram_init_banksize(void)
+{
+	dram_init();
+
+	/* Bank 0 declares the memory available in the DDR low region */
+	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_dram[0].size = gd->ram_size;
+
+	/* Bank 1 declares the memory available in the DDR high region */
+	gd->bd->bi_dram[1].start = 0;
+	gd->bd->bi_dram[1].size = 0;
+
+	return 0;
+}
+
+#ifdef CONFIG_SPL_LOAD_FIT
+int board_fit_config_name_match(const char *name)
+{
+	struct iot2050_info *info = IOT2050_INFO_DATA;
+	char upper_name[32];
+
+	if (info->magic != IOT2050_INFO_MAGIC ||
+	    strlen(name) >= sizeof(upper_name))
+		return -1;
+
+	str_to_upper(name, upper_name, sizeof(upper_name));
+	if (!strcmp(upper_name, (char *)info->name))
+		return 0;
+
+	return -1;
+}
+#endif
+
+int do_board_detect(void)
+{
+	return 0;
+}
+
+#ifdef CONFIG_IOT2050_BOOT_SWITCH
+static bool user_button_pressed(void)
+{
+	struct udevice *red_led = NULL;
+	unsigned long count = 0;
+	struct gpio_desc gpio;
+
+	memset(&gpio, 0, sizeof(gpio));
+
+	if (dm_gpio_lookup_name("25", &gpio) < 0 ||
+	    dm_gpio_request(&gpio, "USER button") < 0 ||
+	    dm_gpio_set_dir_flags(&gpio, GPIOD_IS_IN) < 0)
+		return false;
+
+	if (dm_gpio_get_value(&gpio) == 1)
+		return false;
+
+	printf("USER button pressed - booting from external media only\n");
+
+	led_get_by_label("status-led-red", &red_led);
+
+	if (red_led)
+		led_set_state(red_led, LEDST_ON);
+
+	while (dm_gpio_get_value(&gpio) == 0 && count++ < 10000)
+		mdelay(1);
+
+	if (red_led)
+		led_set_state(red_led, LEDST_OFF);
+
+	return true;
+}
+#endif
+
+#define SERDES0_LANE_SELECT	0x00104080
+
+int board_late_init(void)
+{
+	/* change CTRL_MMR register to let serdes0 not output USB3.0 signals. */
+	writel(0x3, SERDES0_LANE_SELECT);
+
+	set_board_info_env();
+
+	/* remove the eMMC if requested via button */
+	if (IS_ENABLED(CONFIG_IOT2050_BOOT_SWITCH) && board_is_advanced() &&
+	    user_button_pressed())
+		remove_mmc1_target();
+
+	return 0;
+}
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+int ft_board_setup(void *blob, struct bd_info *bd)
+{
+	int ret;
+
+	ret = fdt_fixup_msmc_ram(blob, "/bus@100000", "sram@70000000");
+	if (ret < 0)
+		ret = fdt_fixup_msmc_ram(blob, "/interconnect@100000",
+					 "sram@70000000");
+	if (ret)
+		pr_err("%s: fixing up msmc ram failed %d\n", __func__, ret);
+
+	return ret;
+}
+#endif
+
+void spl_board_init(void)
+{
+}
+
+/* RJ45 LED configuration */
+#define DP83867_DEVADDR			0x1f
+
+#define DP83867_LEDCR_1			0x0018
+
+#define DP83867_LED_1000_BT_LINK	0x5
+#define DP83867_LED_100_BTX_LINK	0x6
+#define DP83867_LED_LINK_BLINK_ACTIVE	0xb
+#define DP83867_LED_SET(n, v)		((v) << ((n) * 4))
+
+#define DP83867_LED_SETTINGS \
+	(DP83867_LED_SET(0, DP83867_LED_LINK_BLINK_ACTIVE) | \
+	 DP83867_LED_SET(1, DP83867_LED_1000_BT_LINK) | \
+	 DP83867_LED_SET(2, DP83867_LED_100_BTX_LINK) | \
+	 DP83867_LED_SET(3, DP83867_LED_100_BTX_LINK))
+
+int board_phy_config(struct phy_device *phydev)
+{
+	return phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_LEDCR_1,
+			     DP83867_LED_SETTINGS);
+}
+
+#if CONFIG_IS_ENABLED(LED)
+/*
+ * Indicate any error or (accidental?) entering of CLI via the red status LED.
+ */
+void show_boot_progress(int progress)
+{
+	struct udevice *dev;
+	int ret;
+
+	if (progress < 0 || progress == BOOTSTAGE_ID_ENTER_CLI_LOOP) {
+		ret = led_get_by_label("status-led-green", &dev);
+		if (ret == 0)
+			led_set_state(dev, LEDST_OFF);
+
+		ret = led_get_by_label("status-led-red", &dev);
+		if (ret == 0)
+			led_set_state(dev, LEDST_ON);
+	}
+}
+#endif
diff --git a/board/siemens/iot2050/config.mk b/board/siemens/iot2050/config.mk
new file mode 100644
index 0000000000..267ec76c4e
--- /dev/null
+++ b/board/siemens/iot2050/config.mk
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (c) Siemens AG, 2020-2021
+#
+# Authors:
+#   Jan Kiszka <jan.kiszka@siemens.com>
+
+flash.bin: all
diff --git a/configs/iot2050_defconfig b/configs/iot2050_defconfig
new file mode 100644
index 0000000000..2ea13f3a39
--- /dev/null
+++ b/configs/iot2050_defconfig
@@ -0,0 +1,140 @@
+CONFIG_ARM=y
+CONFIG_ARCH_K3=y
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x8000
+CONFIG_SOC_K3_AM6=y
+CONFIG_TARGET_IOT2050_A53=y
+CONFIG_IOT2050_BOOT_SWITCH=y
+CONFIG_ENV_SIZE=0x20000
+CONFIG_ENV_OFFSET=0x680000
+CONFIG_ENV_SECT_SIZE=0x20000
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000
+CONFIG_DM_GPIO=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL_STACK_R_ADDR=0x82000000
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_ENV_OFFSET_REDUND=0x6a0000
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_SPL_DM_SPI=y
+CONFIG_SPL_TEXT_BASE=0x80080000
+CONFIG_DISTRO_DEFAULTS=y
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_LOAD_FIT=y
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_CONSOLE_MUX=y
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_SPL_BOARD_INIT=y
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_SEPARATE_BSS=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400
+CONFIG_SPL_DM_MAILBOX=y
+CONFIG_SPL_DM_SPI_FLASH=y
+CONFIG_SPL_DM_RESET=y
+CONFIG_SPL_POWER_DOMAIN=y
+# CONFIG_SPL_SPI_FLASH_TINY is not set
+CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SYS_PROMPT="IOT2050> "
+CONFIG_CMD_ASKENV=y
+CONFIG_CMD_DFU=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+# CONFIG_CMD_NET is not set
+CONFIG_CMD_PCI=y
+CONFIG_CMD_REMOTEPROC=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TIME=y
+# CONFIG_ISO_PARTITION is not set
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="k3-am6528-iot2050-basic"
+CONFIG_OF_LIST="k3-am6528-iot2050-basic k3-am6548-iot2050-advanced"
+CONFIG_SPL_MULTI_DTB_FIT=y
+CONFIG_SPL_OF_LIST="k3-am65-iot2050-spl"
+CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+# CONFIG_NET is not set
+CONFIG_DM=y
+CONFIG_SPL_DM=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SPL_OF_TRANSLATE=y
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_CLK_TI_SCI=y
+CONFIG_DFU_MMC=y
+CONFIG_DFU_RAM=y
+CONFIG_DFU_SF=y
+CONFIG_DMA_CHANNELS=y
+CONFIG_TI_K3_NAVSS_UDMA=y
+CONFIG_TI_SCI_PROTOCOL=y
+CONFIG_DA8XX_GPIO=y
+CONFIG_DM_PCA953X=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_SYS_I2C_OMAP24XX=y
+CONFIG_DM_KEYBOARD=y
+CONFIG_LED=y
+CONFIG_SPL_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_SPL_LED_GPIO=y
+CONFIG_DM_MAILBOX=y
+CONFIG_K3_SEC_PROXY=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_HS200_SUPPORT=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ADMA=y
+CONFIG_MMC_SDHCI_AM654=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_WINBOND=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_DM_ETH=y
+# CONFIG_TI_AM65_CPSW_NUSS is not set
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_PCI_KEYSTONE=y
+CONFIG_PHY=y
+CONFIG_AM654_PHY=y
+CONFIG_OMAP_USB2_PHY=y
+CONFIG_PINCTRL=y
+# CONFIG_PINCTRL_GENERIC is not set
+CONFIG_SPL_PINCTRL=y
+# CONFIG_SPL_PINCTRL_GENERIC is not set
+CONFIG_PINCTRL_SINGLE=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_TI_SCI_POWER_DOMAIN=y
+CONFIG_REMOTEPROC_TI_K3_R5F=y
+CONFIG_DM_RESET=y
+CONFIG_RESET_TI_SCI=y
+CONFIG_DM_SERIAL=y
+CONFIG_SOC_DEVICE=y
+CONFIG_SOC_DEVICE_TI_K3=y
+CONFIG_SOC_TI=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_CADENCE_QSPI=y
+CONFIG_SYSRESET=y
+CONFIG_SPL_SYSRESET=y
+CONFIG_SYSRESET_TI_SCI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
+CONFIG_USB_KEYBOARD=y
+CONFIG_FAT_WRITE=y
+CONFIG_OF_LIBFDT_OVERLAY=y
diff --git a/include/configs/iot2050.h b/include/configs/iot2050.h
new file mode 100644
index 0000000000..c4a8c301c3
--- /dev/null
+++ b/include/configs/iot2050.h
@@ -0,0 +1,60 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Configuration header file for IOT2050
+ * Copyright (c) Siemens AG, 2018-2021
+ *
+ * Authors:
+ *   Le Jin <le.jin@siemens.com>
+ *   Jan Kiszka <jan.kiszk@siemens.com>
+ */
+
+#ifndef __CONFIG_IOT2050_H
+#define __CONFIG_IOT2050_H
+
+#include <linux/sizes.h>
+
+/* SPL Loader Configuration */
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SPL_TEXT_BASE + \
+					 CONFIG_SYS_K3_NON_SECURE_MSRAM_SIZE)
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+
+#define CONFIG_SPL_MAX_SIZE		CONFIG_SYS_K3_MAX_DOWNLODABLE_IMAGE_SIZE
+
+#define CONFIG_SYS_BOOTM_LEN		SZ_64M
+
+/* U-Boot general configuration */
+#define EXTRA_ENV_IOT2050_BOARD_SETTINGS				\
+	"loadaddr=0x80080000\0"						\
+	"scriptaddr=0x83000000\0"					\
+	"kernel_addr_r=0x80080000\0"					\
+	"ramdisk_addr_r=0x81000000\0"					\
+	"fdt_addr_r=0x82000000\0"					\
+	"overlay_addr_r=0x83000000\0"					\
+	"usb_pgood_delay=900\0"
+
+#ifndef CONFIG_SPL_BUILD
+
+/*
+ * This defines all MMC devices, even if the basic variant has no mmc1.
+ * The non-supported device will be removed from the boot targets during
+ * runtime, when that board was detected.
+ */
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 1) \
+	func(MMC, mmc, 0) \
+	func(USB, usb, 0) \
+	func(USB, usb, 1) \
+	func(USB, usb, 2)
+
+#include <config_distro_bootcmd.h>
+
+#endif
+
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	BOOTENV								\
+	EXTRA_ENV_IOT2050_BOARD_SETTINGS
+
+#include <configs/ti_armv7_common.h>
+
+#endif /* __CONFIG_IOT2050_H */
-- 
2.26.2

[PATCH v3 3/5] arm64: dts: ti: k3-am65-mcu: Add RTI watchdog entry

[Jan Kiszka]

From: Jan Kiszka <jan.kiszka@siemens.com>

Add the DT entry for a watchdog based on RTI1. It requires additional
firmware on the MCU R5F cores to handle the expiry, e.g.
https://github.com/siemens/k3-rti-wdt. As this firmware will also lock
the power domain to protect it against premature shutdown, mark it
shared.

Aligns us to the kernel's DT in this regard.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
 arch/arm/dts/k3-am65-mcu.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/dts/k3-am65-mcu.dtsi b/arch/arm/dts/k3-am65-mcu.dtsi
index 7454c8cec0..903796bf7d 100644
--- a/arch/arm/dts/k3-am65-mcu.dtsi
+++ b/arch/arm/dts/k3-am65-mcu.dtsi
@@ -308,4 +308,13 @@
 			ti,loczrama = <1>;
 		};
 	};
+
+	mcu_rti1: rti@40610000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x0 0x40610000 0x0 0x100>;
+		clocks = <&k3_clks 135 0>;
+		power-domains = <&k3_pds 135 TI_SCI_PD_SHARED>;
+		assigned-clocks = <&k3_clks 135 0>;
+		assigned-clock-parents = <&k3_clks 135 4>;
+	};
 };
-- 
2.26.2

[PATCH v3 4/5] watchdog: rti_wdt: Add support for loading firmware

[Jan Kiszka]

From: Jan Kiszka <jan.kiszka@siemens.com>

To avoid the need of extra boot scripting on AM65x for loading a
watchdog firmware, add the required rproc init and loading logic for the
first R5F core to the watchdog start handler. In case the R5F cluster is
in lock-step mode, also initialize the second core. The firmware itself
is embedded into U-Boot binary to ease access to it and ensure it is
properly hashed in case of secure boot.

One possible firmware source is https://github.com/siemens/k3-rti-wdt.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
 drivers/watchdog/Kconfig      | 20 ++++++++++
 drivers/watchdog/Makefile     |  5 +++
 drivers/watchdog/rti_wdt.c    | 72 +++++++++++++++++++++++++++++++++++
 drivers/watchdog/rti_wdt_fw.S | 20 ++++++++++
 4 files changed, 117 insertions(+)
 create mode 100644 drivers/watchdog/rti_wdt_fw.S

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index f0ff2612a6..1a1fddfe9f 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -209,6 +209,26 @@ config WDT_K3_RTI
 	  Say Y here if you want to include support for the K3 watchdog
 	  timer (RTI module) available in the K3 generation of processors.
 
+if WDT_K3_RTI
+
+config WDT_K3_RTI_LOAD_FW
+	bool "Load watchdog firmware"
+	depends on REMOTEPROC
+	help
+	  Automatically load the specified firmware image into the MCU R5F
+	  core 0. On the AM65x, this firmware is supposed to handle the expiry
+	  of the watchdog timer, typically by resetting the system.
+
+config WDT_K3_RTI_FW_FILE
+	string "Watchdog firmware image file"
+	default "k3-rti-wdt.fw"
+	depends on WDT_K3_RTI_LOAD_FW
+	help
+	  Firmware image to be embedded into U-Boot and loaded on watchdog
+	  start.
+
+endif
+
 config WDT_SANDBOX
 	bool "Enable Watchdog Timer support for Sandbox"
 	depends on SANDBOX && WDT
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 5c7ef593fe..5016ee4708 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -33,7 +33,12 @@ obj-$(CONFIG_WDT_OCTEONTX) += octeontx_wdt.o
 obj-$(CONFIG_WDT_OMAP3) += omap_wdt.o
 obj-$(CONFIG_WDT_SBSA) += sbsa_gwdt.o
 obj-$(CONFIG_WDT_K3_RTI) += rti_wdt.o
+obj-$(CONFIG_WDT_K3_RTI_LOAD_FW) += rti_wdt_fw.o
 obj-$(CONFIG_WDT_SP805) += sp805_wdt.o
 obj-$(CONFIG_WDT_STM32MP) += stm32mp_wdt.o
 obj-$(CONFIG_WDT_TANGIER) += tangier_wdt.o
 obj-$(CONFIG_WDT_XILINX) += xilinx_wwdt.o
+
+ifeq ($(CONFIG_WDT_K3_RTI_LOAD_FW),y)
+$(obj)/rti_wdt_fw.o: $(shell readlink -f $(CONFIG_WDT_K3_RTI_FW_FILE)) FORCE
+endif
diff --git a/drivers/watchdog/rti_wdt.c b/drivers/watchdog/rti_wdt.c
index 8335b20ae8..fca743fc6c 100644
--- a/drivers/watchdog/rti_wdt.c
+++ b/drivers/watchdog/rti_wdt.c
@@ -11,9 +11,11 @@
 #include <common.h>
 #include <clk.h>
 #include <dm.h>
+#include <dm/device_compat.h>
 #include <power-domain.h>
 #include <wdt.h>
 #include <asm/io.h>
+#include <remoteproc.h>
 
 /* Timer register set definition */
 #define RTIDWDCTRL		0x90
@@ -42,6 +44,72 @@ struct rti_wdt_priv {
 	unsigned int clk_khz;
 };
 
+#ifdef CONFIG_WDT_K3_RTI_LOAD_FW
+extern const u32 rti_wdt_fw[];
+extern const int rti_wdt_fw_size;
+
+static int rti_wdt_load_fw(struct udevice *dev)
+{
+	struct udevice *rproc_dev;
+	int primary_core, ret;
+	u32 cluster_mode;
+	ofnode node;
+
+	node = ofnode_by_compatible(ofnode_null(), "ti,am654-r5fss");
+	if (!ofnode_valid(node))
+		goto dt_error;
+
+	ret = ofnode_read_u32(node, "ti,cluster-mode", &cluster_mode);
+	if (ret)
+		cluster_mode = 1;
+
+	node = ofnode_by_compatible(node, "ti,am654-r5f");
+	if (!ofnode_valid(node))
+		goto dt_error;
+
+	ret = uclass_get_device_by_ofnode(UCLASS_REMOTEPROC, node, &rproc_dev);
+	if (ret)
+		return ret;
+
+	primary_core = dev_seq(rproc_dev);
+
+	ret = rproc_dev_init(primary_core);
+	if (ret)
+		goto fw_error;
+
+	if (cluster_mode == 1) {
+		ret = rproc_dev_init(primary_core + 1);
+		if (ret)
+			goto fw_error;
+	}
+
+	ret = rproc_load(primary_core, (ulong)rti_wdt_fw,
+			 rti_wdt_fw_size);
+	if (ret)
+		goto fw_error;
+
+	ret = rproc_start(primary_core);
+	if (ret)
+		goto fw_error;
+
+	return 0;
+
+dt_error:
+	dev_err(dev, "No compatible firmware target processor found\n");
+	return -ENODEV;
+
+fw_error:
+	dev_err(dev, "Failed to load watchdog firmware into remote processor %d\n",
+		primary_core);
+	return ret;
+}
+#else
+static inline int rti_wdt_load_fw(struct udevice *dev)
+{
+	return 0;
+}
+#endif
+
 static int rti_wdt_start(struct udevice *dev, u64 timeout_ms, ulong flags)
 {
 	struct rti_wdt_priv *priv = dev_get_priv(dev);
@@ -51,6 +119,10 @@ static int rti_wdt_start(struct udevice *dev, u64 timeout_ms, ulong flags)
 	if (readl(priv->regs + RTIDWDCTRL) == WDENABLE_KEY)
 		return -EBUSY;
 
+	ret = rti_wdt_load_fw(dev);
+	if (ret < 0)
+		return ret;
+
 	timer_margin = timeout_ms * priv->clk_khz / 1000;
 	timer_margin >>= WDT_PRELOAD_SHIFT;
 	if (timer_margin > WDT_PRELOAD_MAX)
diff --git a/drivers/watchdog/rti_wdt_fw.S b/drivers/watchdog/rti_wdt_fw.S
new file mode 100644
index 0000000000..335c0b63f5
--- /dev/null
+++ b/drivers/watchdog/rti_wdt_fw.S
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) Siemens AG, 2020
+ *
+ * Authors:
+ *   Jan Kiszka <jan.kiszka@siemens.com>
+ */
+
+.section .rodata
+
+.global rti_wdt_fw
+.global rti_wdt_fw_size
+
+rti_wdt_fw:
+.align 4
+.incbin CONFIG_WDT_K3_RTI_FW_FILE
+rti_wdt_fw_end:
+
+rti_wdt_fw_size:
+.int rti_wdt_fw_end - rti_wdt_fw
-- 
2.26.2

[PATCH v3 5/5] configs: iot2050: Enable watchdog support, but do not auto-start it

[Jan Kiszka]

From: Jan Kiszka <jan.kiszka@siemens.com>

This allows to use the watchdog in custom scripts but does not enforce
that the OS has to support it as well.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
 configs/iot2050_defconfig | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/configs/iot2050_defconfig b/configs/iot2050_defconfig
index 2ea13f3a39..f228dc8a89 100644
--- a/configs/iot2050_defconfig
+++ b/configs/iot2050_defconfig
@@ -52,6 +52,7 @@ CONFIG_CMD_MMC=y
 CONFIG_CMD_PCI=y
 CONFIG_CMD_REMOTEPROC=y
 CONFIG_CMD_USB=y
+CONFIG_CMD_WDT=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_TIME=y
 # CONFIG_ISO_PARTITION is not set
@@ -136,5 +137,10 @@ CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_DWC3=y
 CONFIG_USB_DWC3_GENERIC=y
 CONFIG_USB_KEYBOARD=y
+# CONFIG_WATCHDOG is not set
+# CONFIG_WATCHDOG_AUTOSTART is not set
+CONFIG_WDT=y
+CONFIG_WDT_K3_RTI=y
+CONFIG_WDT_K3_RTI_LOAD_FW=y
 CONFIG_FAT_WRITE=y
 CONFIG_OF_LIBFDT_OVERLAY=y
-- 
2.26.2

Re: [PATCH v3 0/5] Add SIMATIC IOT2050 board support

[Lokesh Vutla]

Hi Jan,

On 12/06/21 1:12 am, Jan Kiszka wrote:
> This is the baseline support for the SIMATIC IOT2050 devices.
> 
> Changes in v3:
>  - rebased
>  - addressed several checkpatch warnings
>     - a few #ifdef -> IS_ENABLED conversions
>     - comment marker for SPDK identifier in .S file
>     - trailing whitespaces
>  - factored out rti_wdt_load_fw (less #ifdef)

I see that there is no conclusion yet for the Watchdog firmware support. But
that can be split out from this series IMO. Can you repost with basic support so
that I can merge the series. Watchdog support can be dealt separately.

Thanks and regards,
Lokesh

> 
> Changes in v2:
>  - rebased
>  - sync with upstream-accepted DT
>  - add boot switch
>  - include watchdog support
> 
> Allows to boot mainline 5.10 kernels, but not the original BSP-derived
> kernel we currently ship as reference. This is due to the TI sysfw ABI
> breakages between 2.x and 3.x. We will soon provide a transitional
> kernel that allows booting both firmware ABIs - as long as full upstream
> kernel support is work in progress.
> 
> Note that this baseline support lacks Ethernet drivers. We are working
> closely with TI to ensure that the to-be-upstreamed icssg-prueth driver
> will work both with new SR2.0 AM65x silicon as well as with SR1.0 which
> is used in the currently shipped IOT2050 devices.
> 
> A staging tree for complete IOT2050 support can be found at [1]. Full
> image integration is available via [2].
> 
> Jan
> 
> [1] https://github.com/siemens/u-boot/commits/jan/iot2050
> [2] https://github.com/siemens/meta-iot2050
> 
> Jan Kiszka (5):
>   arm: dts: Add IOT2050 device tree files
>   board: siemens: Add support for SIMATIC IOT2050 devices
>   arm64: dts: ti: k3-am65-mcu: Add RTI watchdog entry
>   watchdog: rti_wdt: Add support for loading firmware
>   configs: iot2050: Enable watchdog support, but do not auto-start it
> 
>  arch/arm/dts/Makefile                         |   7 +-
>  arch/arm/dts/k3-am65-iot2050-boot-image.dtsi  | 105 +++
>  .../dts/k3-am65-iot2050-common-u-boot.dtsi    | 103 +++
>  arch/arm/dts/k3-am65-iot2050-common.dtsi      | 655 ++++++++++++++++++
>  arch/arm/dts/k3-am65-iot2050-spl.dts          |  16 +
>  arch/arm/dts/k3-am65-mcu.dtsi                 |   9 +
>  arch/arm/dts/k3-am6528-iot2050-basic.dts      |  67 ++
>  arch/arm/dts/k3-am6548-iot2050-advanced.dts   |  66 ++
>  arch/arm/mach-k3/Kconfig                      |   1 +
>  board/siemens/iot2050/Kconfig                 |  32 +
>  board/siemens/iot2050/MAINTAINERS             |   8 +
>  board/siemens/iot2050/Makefile                |  10 +
>  board/siemens/iot2050/README                  |  65 ++
>  board/siemens/iot2050/board.c                 | 278 ++++++++
>  board/siemens/iot2050/config.mk               |   8 +
>  configs/iot2050_defconfig                     | 146 ++++
>  drivers/watchdog/Kconfig                      |  20 +
>  drivers/watchdog/Makefile                     |   5 +
>  drivers/watchdog/rti_wdt.c                    |  72 ++
>  drivers/watchdog/rti_wdt_fw.S                 |  20 +
>  include/configs/iot2050.h                     |  60 ++
>  21 files changed, 1752 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm/dts/k3-am65-iot2050-boot-image.dtsi
>  create mode 100644 arch/arm/dts/k3-am65-iot2050-common-u-boot.dtsi
>  create mode 100644 arch/arm/dts/k3-am65-iot2050-common.dtsi
>  create mode 100644 arch/arm/dts/k3-am65-iot2050-spl.dts
>  create mode 100644 arch/arm/dts/k3-am6528-iot2050-basic.dts
>  create mode 100644 arch/arm/dts/k3-am6548-iot2050-advanced.dts
>  create mode 100644 board/siemens/iot2050/Kconfig
>  create mode 100644 board/siemens/iot2050/MAINTAINERS
>  create mode 100644 board/siemens/iot2050/Makefile
>  create mode 100644 board/siemens/iot2050/README
>  create mode 100644 board/siemens/iot2050/board.c
>  create mode 100644 board/siemens/iot2050/config.mk
>  create mode 100644 configs/iot2050_defconfig
>  create mode 100644 drivers/watchdog/rti_wdt_fw.S
>  create mode 100644 include/configs/iot2050.h
> 

Re: [PATCH v3 0/5] Add SIMATIC IOT2050 board support

[Jan Kiszka]

On 14.07.21 11:29, Lokesh Vutla wrote:
> Hi Jan,
> 
> On 12/06/21 1:12 am, Jan Kiszka wrote:
>> This is the baseline support for the SIMATIC IOT2050 devices.
>>
>> Changes in v3:
>>  - rebased
>>  - addressed several checkpatch warnings
>>     - a few #ifdef -> IS_ENABLED conversions
>>     - comment marker for SPDK identifier in .S file
>>     - trailing whitespaces
>>  - factored out rti_wdt_load_fw (less #ifdef)
> 
> I see that there is no conclusion yet for the Watchdog firmware support. But
> that can be split out from this series IMO. Can you repost with basic support so
> that I can merge the series. Watchdog support can be dealt separately.

I will eventually look again into that loading topic, but I would also
consider that non-critical to merge it this way first and cleanup later
if it actually turns out to be solvable in an equivalent way (result is
part of u-boot proper image) via binman. Even the configuration
interface may stay the same.

If you still have concerns, skip patch 4 and 5 - though that would
affect an increasing demand of our users for this important feature.

Jan

-- 
Siemens AG, T RDA IOT
Corporate Competence Center Embedded Linux

Re: [PATCH v3 0/5] Add SIMATIC IOT2050 board support

[Lokesh Vutla]

On 14/07/21 3:09 pm, Jan Kiszka wrote:
> On 14.07.21 11:29, Lokesh Vutla wrote:
>> Hi Jan,
>>
>> On 12/06/21 1:12 am, Jan Kiszka wrote:
>>> This is the baseline support for the SIMATIC IOT2050 devices.
>>>
>>> Changes in v3:
>>>  - rebased
>>>  - addressed several checkpatch warnings
>>>     - a few #ifdef -> IS_ENABLED conversions
>>>     - comment marker for SPDK identifier in .S file
>>>     - trailing whitespaces
>>>  - factored out rti_wdt_load_fw (less #ifdef)
>>
>> I see that there is no conclusion yet for the Watchdog firmware support. But
>> that can be split out from this series IMO. Can you repost with basic support so
>> that I can merge the series. Watchdog support can be dealt separately.
> 
> I will eventually look again into that loading topic, but I would also
> consider that non-critical to merge it this way first and cleanup later
> if it actually turns out to be solvable in an equivalent way (result is
> part of u-boot proper image) via binman. Even the configuration
> interface may stay the same.

I am fine if Tom or Simon agrees on this.

Thanks and regards,
Lokesh

> 
> If you still have concerns, skip patch 4 and 5 - though that would
> affect an increasing demand of our users for this important feature.
> 
> Jan
> 

Re: [PATCH v3 0/5] Add SIMATIC IOT2050 board support

[Lokesh Vutla]

Hi Jan,

On 14/07/21 3:09 pm, Jan Kiszka wrote:
> On 14.07.21 11:29, Lokesh Vutla wrote:
>> Hi Jan,
>>
>> On 12/06/21 1:12 am, Jan Kiszka wrote:
>>> This is the baseline support for the SIMATIC IOT2050 devices.
>>>
>>> Changes in v3:
>>>  - rebased
>>>  - addressed several checkpatch warnings
>>>     - a few #ifdef -> IS_ENABLED conversions
>>>     - comment marker for SPDK identifier in .S file
>>>     - trailing whitespaces
>>>  - factored out rti_wdt_load_fw (less #ifdef)
>>
>> I see that there is no conclusion yet for the Watchdog firmware support. But
>> that can be split out from this series IMO. Can you repost with basic support so
>> that I can merge the series. Watchdog support can be dealt separately.
> 
> I will eventually look again into that loading topic, but I would also
> consider that non-critical to merge it this way first and cleanup later
> if it actually turns out to be solvable in an equivalent way (result is
> part of u-boot proper image) via binman. Even the configuration
> interface may stay the same.
> 
> If you still have concerns, skip patch 4 and 5 - though that would
> affect an increasing demand of our users for this important feature.

First 3 patches of the series throws a build error for me:
https://source.denx.de/u-boot/custodians/u-boot-ti/-/jobs/292183

Can you take a look?

Thanks and regards,
Lokesh

> 
> Jan
> 

Re: [PATCH v3 0/5] Add SIMATIC IOT2050 board support

[Jan Kiszka]

On 15.07.21 08:35, Lokesh Vutla wrote:
> Hi Jan,
> 
> On 14/07/21 3:09 pm, Jan Kiszka wrote:
>> On 14.07.21 11:29, Lokesh Vutla wrote:
>>> Hi Jan,
>>>
>>> On 12/06/21 1:12 am, Jan Kiszka wrote:
>>>> This is the baseline support for the SIMATIC IOT2050 devices.
>>>>
>>>> Changes in v3:
>>>>  - rebased
>>>>  - addressed several checkpatch warnings
>>>>     - a few #ifdef -> IS_ENABLED conversions
>>>>     - comment marker for SPDK identifier in .S file
>>>>     - trailing whitespaces
>>>>  - factored out rti_wdt_load_fw (less #ifdef)
>>>
>>> I see that there is no conclusion yet for the Watchdog firmware support. But
>>> that can be split out from this series IMO. Can you repost with basic support so
>>> that I can merge the series. Watchdog support can be dealt separately.
>>
>> I will eventually look again into that loading topic, but I would also
>> consider that non-critical to merge it this way first and cleanup later
>> if it actually turns out to be solvable in an equivalent way (result is
>> part of u-boot proper image) via binman. Even the configuration
>> interface may stay the same.
>>
>> If you still have concerns, skip patch 4 and 5 - though that would
>> affect an increasing demand of our users for this important feature.
> 
> First 3 patches of the series throws a build error for me:
> https://source.denx.de/u-boot/custodians/u-boot-ti/-/jobs/292183
> 
> Can you take a look?
> 

Thanks, found and fixed - but now I'm facing a boot regression over
current master. Will have to bisect this, if this is related to some
config switch we are missing now or rather a real issue in the current tree.

Jan

-- 
Siemens AG, T RDA IOT
Corporate Competence Center Embedded Linux