All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stefan Roese <sr@denx.de>
To: "Pali Rohár" <pali@kernel.org>,
	"Chris Packham" <judge.packham@gmail.com>,
	"Baruch Siach" <baruch@tkos.co.il>,
	"Dirk Eibach" <dirk.eibach@gdsys.cc>,
	u-boot@lists.denx.de
Cc: "Marek Behún" <marek.behun@nic.cz>,
	"Dennis Gilmore" <dgilmore@redhat.com>,
	"Mario Six" <mario.six@gdsys.cc>,
	"Jon Nettleton" <jon@solid-run.com>
Subject: Re: [PATCH 3/5] arm: mvebu: msys: Set CONFIG_SYS_TCLK globally
Date: Mon, 2 Aug 2021 08:34:31 +0200	[thread overview]
Message-ID: <5f9b3ea3-798f-391a-933a-3502dd689634@denx.de> (raw)
In-Reply-To: <20210731122256.6546-4-pali@kernel.org>

On 31.07.21 14:22, Pali Rohár wrote:
> This mvebu msys platform always uses fixed 200 MHz TCLK. So specify this
> CONFIG_SYS_TCLK option in msys section of global file soc.h file instead of
> manual configuration in every board file.
> 
> Signed-off-by: Pali Rohár <pali@kernel.org>

Reviewed-by: Stefan Roese <sr@denx.de>

Thanks,
Stefan

> ---
>   arch/arm/mach-mvebu/include/mach/soc.h | 2 ++
>   include/configs/crs3xx-98dx3236.h      | 1 -
>   include/configs/db-xc3-24g4xg.h        | 1 -
>   3 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-mvebu/include/mach/soc.h b/arch/arm/mach-mvebu/include/mach/soc.h
> index eb6906ad8027..e29c0f32c3de 100644
> --- a/arch/arm/mach-mvebu/include/mach/soc.h
> +++ b/arch/arm/mach-mvebu/include/mach/soc.h
> @@ -187,6 +187,8 @@
>   #define BOOT_FROM_NAND		0x1
>   #define BOOT_FROM_UART		0x2
>   #define BOOT_FROM_SPI		0x3
> +
> +#define CONFIG_SYS_TCLK		200000000	/* 200MHz */
>   #else
>   /* SAR values for Armada XP */
>   #define CONFIG_SAR_REG		(MVEBU_REGISTER(0x18230))
> diff --git a/include/configs/crs3xx-98dx3236.h b/include/configs/crs3xx-98dx3236.h
> index e2ba7b81263f..3feaa60edad8 100644
> --- a/include/configs/crs3xx-98dx3236.h
> +++ b/include/configs/crs3xx-98dx3236.h
> @@ -12,7 +12,6 @@
>   
>   #define CONFIG_SYS_BOOTM_LEN	(64 * 1024 * 1024) /* 64 MB */
>   #define CONFIG_SYS_KWD_CONFIG	$(CONFIG_BOARDDIR)/kwbimage.cfg
> -#define CONFIG_SYS_TCLK		200000000	/* 200MHz */
>   
>   /* USB/EHCI configuration */
>   #define CONFIG_EHCI_IS_TDI
> diff --git a/include/configs/db-xc3-24g4xg.h b/include/configs/db-xc3-24g4xg.h
> index 0e9ccd9b4419..f04ae487b76a 100644
> --- a/include/configs/db-xc3-24g4xg.h
> +++ b/include/configs/db-xc3-24g4xg.h
> @@ -11,7 +11,6 @@
>    */
>   
>   #define CONFIG_SYS_KWD_CONFIG	$(CONFIG_BOARDDIR)/kwbimage.cfg
> -#define CONFIG_SYS_TCLK		200000000	/* 200MHz */
>   
>   /* USB/EHCI configuration */
>   #define CONFIG_EHCI_IS_TDI
> 


Viele Grüße,
Stefan

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr@denx.de

  reply	other threads:[~2021-08-02  6:34 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-31 12:22 [PATCH 0/5] arm: mvebu: Automatically detect CONFIG_SYS_TCLK Pali Rohár
2021-07-31 12:22 ` [PATCH 1/5] arm: mvebu: a38x: Detect CONFIG_SYS_TCLK from SAR register Pali Rohár
2021-08-02  6:33   ` Stefan Roese
2021-07-31 12:22 ` [PATCH 2/5] arm: mvebu: a37x: " Pali Rohár
2021-08-02  6:33   ` Stefan Roese
2021-07-31 12:22 ` [PATCH 3/5] arm: mvebu: msys: Set CONFIG_SYS_TCLK globally Pali Rohár
2021-08-02  6:34   ` Stefan Roese [this message]
2021-07-31 12:22 ` [PATCH 4/5] arm: mvebu: axp: " Pali Rohár
2021-08-02  6:35   ` Stefan Roese
2021-07-31 12:22 ` [PATCH 5/5] arm: kirkwood: Do not overwrite CONFIG_SYS_TCLK Pali Rohár
2021-08-01  8:07   ` Chris Packham
2021-08-01 10:25     ` Pali Rohár
2022-08-16  9:37       ` Michael Walle
2022-08-16 18:17         ` Pali Rohár
2022-08-16 19:38           ` Pali Rohár
2022-08-16 20:02             ` Pali Rohár
2022-08-16 20:06             ` Michael Walle
2022-08-16 20:05           ` Michael Walle
2021-08-02  6:35   ` Stefan Roese
2021-08-11  8:27 ` [PATCH 0/5] arm: mvebu: Automatically detect CONFIG_SYS_TCLK Stefan Roese

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5f9b3ea3-798f-391a-933a-3502dd689634@denx.de \
    --to=sr@denx.de \
    --cc=baruch@tkos.co.il \
    --cc=dgilmore@redhat.com \
    --cc=dirk.eibach@gdsys.cc \
    --cc=jon@solid-run.com \
    --cc=judge.packham@gmail.com \
    --cc=marek.behun@nic.cz \
    --cc=mario.six@gdsys.cc \
    --cc=pali@kernel.org \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.