On 10/16/20 3:43 PM, Joakim Zhang wrote:
> For SoCs with SCU support, need setup stop mode via SCU firmware,
> so this property can help indicate a resource.
> 
> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
> ---
>  Documentation/devicetree/bindings/net/can/fsl-flexcan.txt | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
> index 6af67f5e581c..839c0c0064a2 100644
> --- a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
> +++ b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
> @@ -43,6 +43,10 @@ Optional properties:
>  		  0: clock source 0 (oscillator clock)
>  		  1: clock source 1 (peripheral clock)
>  
> +- fsl,can-index: The index of CAN instance.
> +                 For SoCs with SCU support, need setup stop mode via SCU firmware,
> +                 so this property can help indicate a resource.

This property is not CAN specific. So the name could be more general.

> +
>  - wakeup-source: enable CAN remote wakeup
>  
>  Example:
> @@ -54,4 +58,5 @@ Example:
>  		interrupt-parent = <&mpic>;
>  		clock-frequency = <200000000>; // filled in by bootloader
>  		fsl,clk-source = /bits/ 8 <0>; // select clock source 0 for PE
> +		fsl,can-index = /bits/ 8 <1>; // the second CAN instance
>  	};
> 

Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |