All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v2] Bluetooth: Fix not generating RPA when required
@ 2021-07-14 20:34 Luiz Augusto von Dentz
  2021-07-14 21:03 ` [v2] " bluez.test.bot
  0 siblings, 1 reply; 3+ messages in thread
From: Luiz Augusto von Dentz @ 2021-07-14 20:34 UTC (permalink / raw)
  To: linux-bluetooth

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Code was checking if random_addr and hdev->rpa match without first
checking if the RPA has not been set (BDADDR_ANY), furthermore it was
clearing HCI_RPA_EXPIRED before the command completes and the RPA is
actually programmed which in case of failure would leave the expired
RPA still set.

Since advertising instance have a similar problem the clearing of
HCI_RPA_EXPIRED has been moved to hci_event.c after checking the random
address is in fact the hdev->rap and then proceed to set the expire
timeout.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
 include/net/bluetooth/hci_core.h |  4 ++++
 net/bluetooth/hci_event.c        | 28 ++++++++++++++++++++++++----
 net/bluetooth/hci_request.c      | 26 +++-----------------------
 3 files changed, 31 insertions(+), 27 deletions(-)

diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index d916729674a0..d1b3c0d5649a 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -1412,6 +1412,10 @@ void hci_conn_del_sysfs(struct hci_conn *conn);
 				!hci_dev_test_flag(dev, HCI_AUTO_OFF))
 #define bredr_sc_enabled(dev)  (lmp_sc_capable(dev) && \
 				hci_dev_test_flag(dev, HCI_SC_ENABLED))
+#define rpa_valid(dev)         (bacmp(&dev->rpa, BDADDR_ANY) && \
+				!hci_dev_test_flag(dev, HCI_RPA_EXPIRED))
+#define adv_rpa_valid(adv)     (bacmp(&adv->random_addr, BDADDR_ANY) && \
+				!adv->rpa_expired)
 
 #define scan_1m(dev) (((dev)->le_tx_def_phys & HCI_LE_SET_PHY_1M) || \
 		      ((dev)->le_rx_def_phys & HCI_LE_SET_PHY_1M))
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index d7e85049d49d..81f8e9193b90 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -40,6 +40,8 @@
 #define ZERO_KEY "\x00\x00\x00\x00\x00\x00\x00\x00" \
 		 "\x00\x00\x00\x00\x00\x00\x00\x00"
 
+#define secs_to_jiffies(_secs) msecs_to_jiffies((_secs) * 1000)
+
 /* Handle HCI Event packets */
 
 static void hci_cc_inquiry_cancel(struct hci_dev *hdev, struct sk_buff *skb,
@@ -1171,6 +1173,12 @@ static void hci_cc_le_set_random_addr(struct hci_dev *hdev, struct sk_buff *skb)
 
 	bacpy(&hdev->random_addr, sent);
 
+	if (!bacmp(&hdev->rpa, sent)) {
+		hci_dev_clear_flag(hdev, HCI_RPA_EXPIRED);
+		queue_delayed_work(hdev->workqueue, &hdev->rpa_expired,
+				   secs_to_jiffies(hdev->rpa_timeout));
+	}
+
 	hci_dev_unlock(hdev);
 }
 
@@ -1201,7 +1209,7 @@ static void hci_cc_le_set_adv_set_random_addr(struct hci_dev *hdev,
 {
 	__u8 status = *((__u8 *) skb->data);
 	struct hci_cp_le_set_adv_set_rand_addr *cp;
-	struct adv_info *adv_instance;
+	struct adv_info *adv;
 
 	if (status)
 		return;
@@ -1215,10 +1223,22 @@ static void hci_cc_le_set_adv_set_random_addr(struct hci_dev *hdev,
 	if (!cp->handle) {
 		/* Store in hdev for instance 0 (Set adv and Directed advs) */
 		bacpy(&hdev->random_addr, &cp->bdaddr);
+		if (!bacmp(&hdev->rpa, &cp->bdaddr)) {
+			hci_dev_clear_flag(hdev, HCI_RPA_EXPIRED);
+			queue_delayed_work(hdev->workqueue, &hdev->rpa_expired,
+					   secs_to_jiffies(hdev->rpa_timeout));
+		}
 	} else {
-		adv_instance = hci_find_adv_instance(hdev, cp->handle);
-		if (adv_instance)
-			bacpy(&adv_instance->random_addr, &cp->bdaddr);
+		adv = hci_find_adv_instance(hdev, cp->handle);
+		if (adv) {
+			bacpy(&adv->random_addr, &cp->bdaddr);
+			if (!bacmp(&hdev->rpa, &cp->bdaddr)) {
+				adv->rpa_expired = false;
+				queue_delayed_work(hdev->workqueue,
+						   &adv->rpa_expired_cb,
+						   secs_to_jiffies(hdev->rpa_timeout));
+			}
+		}
 	}
 
 	hci_dev_unlock(hdev);
diff --git a/net/bluetooth/hci_request.c b/net/bluetooth/hci_request.c
index 1d14adc023e9..eea2c3f5f118 100644
--- a/net/bluetooth/hci_request.c
+++ b/net/bluetooth/hci_request.c
@@ -2072,8 +2072,6 @@ int hci_get_random_address(struct hci_dev *hdev, bool require_privacy,
 	 * current RPA has expired then generate a new one.
 	 */
 	if (use_rpa) {
-		int to;
-
 		/* If Controller supports LL Privacy use own address type is
 		 * 0x03
 		 */
@@ -2084,14 +2082,10 @@ int hci_get_random_address(struct hci_dev *hdev, bool require_privacy,
 			*own_addr_type = ADDR_LE_DEV_RANDOM;
 
 		if (adv_instance) {
-			if (!adv_instance->rpa_expired &&
-			    !bacmp(&adv_instance->random_addr, &hdev->rpa))
+			if (adv_rpa_valid(adv_instance))
 				return 0;
-
-			adv_instance->rpa_expired = false;
 		} else {
-			if (!hci_dev_test_and_clear_flag(hdev, HCI_RPA_EXPIRED) &&
-			    !bacmp(&hdev->random_addr, &hdev->rpa))
+			if (rpa_valid(hdev))
 				return 0;
 		}
 
@@ -2103,14 +2097,6 @@ int hci_get_random_address(struct hci_dev *hdev, bool require_privacy,
 
 		bacpy(rand_addr, &hdev->rpa);
 
-		to = msecs_to_jiffies(hdev->rpa_timeout * 1000);
-		if (adv_instance)
-			queue_delayed_work(hdev->workqueue,
-					   &adv_instance->rpa_expired_cb, to);
-		else
-			queue_delayed_work(hdev->workqueue,
-					   &hdev->rpa_expired, to);
-
 		return 0;
 	}
 
@@ -2547,8 +2533,6 @@ int hci_update_random_address(struct hci_request *req, bool require_privacy,
 	 * the current RPA in use, then generate a new one.
 	 */
 	if (use_rpa) {
-		int to;
-
 		/* If Controller supports LL Privacy use own address type is
 		 * 0x03
 		 */
@@ -2558,8 +2542,7 @@ int hci_update_random_address(struct hci_request *req, bool require_privacy,
 		else
 			*own_addr_type = ADDR_LE_DEV_RANDOM;
 
-		if (!hci_dev_test_and_clear_flag(hdev, HCI_RPA_EXPIRED) &&
-		    !bacmp(&hdev->random_addr, &hdev->rpa))
+		if (rpa_valid(hdev))
 			return 0;
 
 		err = smp_generate_rpa(hdev, hdev->irk, &hdev->rpa);
@@ -2570,9 +2553,6 @@ int hci_update_random_address(struct hci_request *req, bool require_privacy,
 
 		set_random_addr(req, &hdev->rpa);
 
-		to = msecs_to_jiffies(hdev->rpa_timeout * 1000);
-		queue_delayed_work(hdev->workqueue, &hdev->rpa_expired, to);
-
 		return 0;
 	}
 
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 3+ messages in thread

* RE: [v2] Bluetooth: Fix not generating RPA when required
  2021-07-14 20:34 [PATCH v2] Bluetooth: Fix not generating RPA when required Luiz Augusto von Dentz
@ 2021-07-14 21:03 ` bluez.test.bot
  0 siblings, 0 replies; 3+ messages in thread
From: bluez.test.bot @ 2021-07-14 21:03 UTC (permalink / raw)
  To: linux-bluetooth, luiz.dentz

[-- Attachment #1: Type: text/plain, Size: 2727 bytes --]

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=515695

---Test result---

Test Summary:
CheckPatch                    PASS      0.82 seconds
GitLint                       PASS      0.10 seconds
BuildKernel                   PASS      506.37 seconds
TestRunner: Setup             PASS      333.86 seconds
TestRunner: l2cap-tester      PASS      2.54 seconds
TestRunner: bnep-tester       PASS      1.86 seconds
TestRunner: mgmt-tester       PASS      30.59 seconds
TestRunner: rfcomm-tester     PASS      2.05 seconds
TestRunner: sco-tester        PASS      2.02 seconds
TestRunner: smp-tester        FAIL      2.01 seconds
TestRunner: userchan-tester   PASS      1.89 seconds

Details
##############################
Test: CheckPatch - PASS - 0.82 seconds
Run checkpatch.pl script with rule in .checkpatch.conf


##############################
Test: GitLint - PASS - 0.10 seconds
Run gitlint with rule in .gitlint


##############################
Test: BuildKernel - PASS - 506.37 seconds
Build Kernel with minimal configuration supports Bluetooth


##############################
Test: TestRunner: Setup - PASS - 333.86 seconds
Setup environment for running Test Runner


##############################
Test: TestRunner: l2cap-tester - PASS - 2.54 seconds
Run test-runner with l2cap-tester
Total: 40, Passed: 40 (100.0%), Failed: 0, Not Run: 0

##############################
Test: TestRunner: bnep-tester - PASS - 1.86 seconds
Run test-runner with bnep-tester
Total: 1, Passed: 1 (100.0%), Failed: 0, Not Run: 0

##############################
Test: TestRunner: mgmt-tester - PASS - 30.59 seconds
Run test-runner with mgmt-tester
Total: 446, Passed: 443 (99.3%), Failed: 0, Not Run: 3

##############################
Test: TestRunner: rfcomm-tester - PASS - 2.05 seconds
Run test-runner with rfcomm-tester
Total: 9, Passed: 9 (100.0%), Failed: 0, Not Run: 0

##############################
Test: TestRunner: sco-tester - PASS - 2.02 seconds
Run test-runner with sco-tester
Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0

##############################
Test: TestRunner: smp-tester - FAIL - 2.01 seconds
Run test-runner with smp-tester
Total: 8, Passed: 7 (87.5%), Failed: 1, Not Run: 0

Failed Test Cases
SMP Client - SC Request 2                            Failed       0.020 seconds

##############################
Test: TestRunner: userchan-tester - PASS - 1.89 seconds
Run test-runner with userchan-tester
Total: 3, Passed: 3 (100.0%), Failed: 0, Not Run: 0



---
Regards,
Linux Bluetooth


[-- Attachment #2: l2cap-tester.log --]
[-- Type: application/octet-stream, Size: 44350 bytes --]

[-- Attachment #3: bnep-tester.log --]
[-- Type: application/octet-stream, Size: 3557 bytes --]

[-- Attachment #4: mgmt-tester.log --]
[-- Type: application/octet-stream, Size: 614404 bytes --]

[-- Attachment #5: rfcomm-tester.log --]
[-- Type: application/octet-stream, Size: 11677 bytes --]

[-- Attachment #6: sco-tester.log --]
[-- Type: application/octet-stream, Size: 9912 bytes --]

[-- Attachment #7: smp-tester.log --]
[-- Type: application/octet-stream, Size: 11705 bytes --]

[-- Attachment #8: userchan-tester.log --]
[-- Type: application/octet-stream, Size: 5454 bytes --]

^ permalink raw reply	[flat|nested] 3+ messages in thread

* RE: [v2] Bluetooth: Fix not generating RPA when required
  2021-07-14 18:56 [PATCH v2] " Luiz Augusto von Dentz
@ 2021-07-14 20:00 ` bluez.test.bot
  0 siblings, 0 replies; 3+ messages in thread
From: bluez.test.bot @ 2021-07-14 20:00 UTC (permalink / raw)
  To: linux-bluetooth, luiz.dentz

[-- Attachment #1: Type: text/plain, Size: 3384 bytes --]

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=515663

---Test result---

Test Summary:
CheckPatch                    FAIL      0.87 seconds
GitLint                       PASS      0.12 seconds
BuildKernel                   PASS      580.38 seconds
TestRunner: Setup             PASS      384.24 seconds
TestRunner: l2cap-tester      PASS      2.77 seconds
TestRunner: bnep-tester       PASS      2.00 seconds
TestRunner: mgmt-tester       PASS      30.65 seconds
TestRunner: rfcomm-tester     PASS      2.19 seconds
TestRunner: sco-tester        PASS      2.13 seconds
TestRunner: smp-tester        FAIL      2.20 seconds
TestRunner: userchan-tester   PASS      2.02 seconds

Details
##############################
Test: CheckPatch - FAIL - 0.87 seconds
Run checkpatch.pl script with rule in .checkpatch.conf
Bluetooth: Fix not generating RPA when required
CHECK: Macro argument '_secs' may be better as '(_secs)' to avoid precedence issues
#42: FILE: net/bluetooth/hci_event.c:43:
+#define secs_to_jiffies(_secs) msecs_to_jiffies(_secs * 1000)

total: 0 errors, 0 warnings, 1 checks, 127 lines checked

NOTE: For some of the reported defects, checkpatch may be able to
      mechanically convert to the typical style using --fix or --fix-inplace.

"[PATCH] Bluetooth: Fix not generating RPA when required" has style problems, please review.

NOTE: If any of the errors are false positives, please report
      them to the maintainer, see CHECKPATCH in MAINTAINERS.


##############################
Test: GitLint - PASS - 0.12 seconds
Run gitlint with rule in .gitlint


##############################
Test: BuildKernel - PASS - 580.38 seconds
Build Kernel with minimal configuration supports Bluetooth


##############################
Test: TestRunner: Setup - PASS - 384.24 seconds
Setup environment for running Test Runner


##############################
Test: TestRunner: l2cap-tester - PASS - 2.77 seconds
Run test-runner with l2cap-tester
Total: 40, Passed: 40 (100.0%), Failed: 0, Not Run: 0

##############################
Test: TestRunner: bnep-tester - PASS - 2.00 seconds
Run test-runner with bnep-tester
Total: 1, Passed: 1 (100.0%), Failed: 0, Not Run: 0

##############################
Test: TestRunner: mgmt-tester - PASS - 30.65 seconds
Run test-runner with mgmt-tester
Total: 446, Passed: 443 (99.3%), Failed: 0, Not Run: 3

##############################
Test: TestRunner: rfcomm-tester - PASS - 2.19 seconds
Run test-runner with rfcomm-tester
Total: 9, Passed: 9 (100.0%), Failed: 0, Not Run: 0

##############################
Test: TestRunner: sco-tester - PASS - 2.13 seconds
Run test-runner with sco-tester
Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0

##############################
Test: TestRunner: smp-tester - FAIL - 2.20 seconds
Run test-runner with smp-tester
Total: 8, Passed: 7 (87.5%), Failed: 1, Not Run: 0

Failed Test Cases
SMP Client - SC Request 2                            Failed       0.025 seconds

##############################
Test: TestRunner: userchan-tester - PASS - 2.02 seconds
Run test-runner with userchan-tester
Total: 3, Passed: 3 (100.0%), Failed: 0, Not Run: 0



---
Regards,
Linux Bluetooth


[-- Attachment #2: l2cap-tester.log --]
[-- Type: application/octet-stream, Size: 44350 bytes --]

[-- Attachment #3: bnep-tester.log --]
[-- Type: application/octet-stream, Size: 3557 bytes --]

[-- Attachment #4: mgmt-tester.log --]
[-- Type: application/octet-stream, Size: 614404 bytes --]

[-- Attachment #5: rfcomm-tester.log --]
[-- Type: application/octet-stream, Size: 11677 bytes --]

[-- Attachment #6: sco-tester.log --]
[-- Type: application/octet-stream, Size: 9912 bytes --]

[-- Attachment #7: smp-tester.log --]
[-- Type: application/octet-stream, Size: 11705 bytes --]

[-- Attachment #8: userchan-tester.log --]
[-- Type: application/octet-stream, Size: 5454 bytes --]

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2021-07-14 21:03 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-14 20:34 [PATCH v2] Bluetooth: Fix not generating RPA when required Luiz Augusto von Dentz
2021-07-14 21:03 ` [v2] " bluez.test.bot
  -- strict thread matches above, loose matches on Subject: below --
2021-07-14 18:56 [PATCH v2] " Luiz Augusto von Dentz
2021-07-14 20:00 ` [v2] " bluez.test.bot

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.