From mboxrd@z Thu Jan  1 00:00:00 1970
From: Christophe Kerello <christophe.kerello@st.com>
Date: Tue, 14 Apr 2020 09:23:52 +0200
Subject: [PATCH V3] ARM: dts: stm32: Add KS8851-16MLL ethernet on FMC2
In-Reply-To: <08f36099-56b9-4399-f94a-aa1b9f399ba2@denx.de>
References: <20200326155815.69193-1-marex@denx.de>
 <79610bfef0a0455ca88c0e29ca683b05@SFHDAG6NODE3.st.com>
 <940cd288-f33d-1e24-1113-7016b51fbf22@denx.de>
 <646e71679205490cb550de537c1a6c88@SFHDAG6NODE3.st.com>
 <08f36099-56b9-4399-f94a-aa1b9f399ba2@denx.de>
Message-ID: <631813d8-10f0-025c-178e-85808f513421@st.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de



On 4/10/20 8:11 PM, Marek Vasut wrote:
> On 4/9/20 7:38 PM, Patrick DELAUNAY wrote:
> Hi,
> 
> [...]
> 
>>> That looks like a hack, it would collide with the actual FMC2 driver and it seems
>>> the FMC2 DT compatible string is not even stable yet (cfr the Linux patches). So I
>>> am reluctant to do anything like depending on the FMC DT bindings thus far.
>>
>> You are aligned with Christophe, he push me to accept your temporarily solution.
> 
> Great, thanks.
> 
> I had a look into writing the bus driver in the meantime, but it's not
> as simple as I originally anticipated. So, I'll wait until the Linux DT
> bindings stabilize and revisit it then.
> 
> Thanks
> 

Hi Marek,

I have already prepared a set of patches to add the full FMC2 support in 
U-Boot based on kernel drivers. I am currently waiting for the bindings 
and the drivers being reviewed on kernel side.

Regards,
Christophe Kerello.