All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kirti Wankhede <kwankhede@nvidia.com>
To: Alex Williamson <alex.williamson@redhat.com>
Cc: <kvm@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<cohuck@redhat.com>, <jgg@nvidia.com>
Subject: Re: [PATCH] vfio/mtty: Enforce available_instances
Date: Tue, 29 Jun 2021 01:22:00 +0530	[thread overview]
Message-ID: <641a865f-a45b-10ed-8287-3759191a9686@nvidia.com> (raw)
In-Reply-To: <20210628125602.5b07388e.alex.williamson@redhat.com>



On 6/29/2021 12:26 AM, Alex Williamson wrote:
> On Mon, 28 Jun 2021 23:19:54 +0530
> Kirti Wankhede <kwankhede@nvidia.com> wrote:
> 
>> On 6/26/2021 2:56 AM, Alex Williamson wrote:
>>> The sample mtty mdev driver doesn't actually enforce the number of
>>> device instances it claims are available.  Implement this properly.
>>>
>>> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
>>> ---
>>>
>>> Applies to vfio next branch + Jason's atomic conversion
>>>    
>>
>>
>> Does this need to be on top of Jason's patch?
> 
> Yes, see immediately above.
> 
>> Patch to use mdev_used_ports is reverted here, can it be changed from
>> mdev_devices_list to mdev_avail_ports atomic variable?
> 
> It doesn't revert Jason's change, it builds on it.  The patches could
> we squashed, but there's no bug in Jason's patch that we're trying to
> avoid exposing, so I don't see why we'd do that.
>

'Squashed' is the correct word that 'revert', my bad.

>> Change here to use atomic variable looks good to me.
>>
>> Reviewed by: Kirti Wankhede <kwankhede@nvidia.com>
> 
> Thanks!  It was Jason's patch[1] that converted to use an atomic
> though, so I'm slightly confused if this R-b is for the patch below,
> Jason's patch, or both.  Thanks,

I liked 'mdev_avail_ports' approach than 'mdev_used_ports' approach 
here. This R-b is for below patch.

Thanks,
Kirti

> 
> Alex
> 
> [1]https://lore.kernel.org/kvm/0-v1-0bc56b362ca7+62-mtty_used_ports_jgg@nvidia.com/
> 
>>>    samples/vfio-mdev/mtty.c |   22 ++++++++++++++++------
>>>    1 file changed, 16 insertions(+), 6 deletions(-)
>>>
>>> diff --git a/samples/vfio-mdev/mtty.c b/samples/vfio-mdev/mtty.c
>>> index ffbaf07a17ea..8b26fecc4afe 100644
>>> --- a/samples/vfio-mdev/mtty.c
>>> +++ b/samples/vfio-mdev/mtty.c
>>> @@ -144,7 +144,7 @@ struct mdev_state {
>>>    	int nr_ports;
>>>    };
>>>    
>>> -static atomic_t mdev_used_ports;
>>> +static atomic_t mdev_avail_ports = ATOMIC_INIT(MAX_MTTYS);
>>>    
>>>    static const struct file_operations vd_fops = {
>>>    	.owner          = THIS_MODULE,
>>> @@ -707,11 +707,20 @@ static int mtty_probe(struct mdev_device *mdev)
>>>    {
>>>    	struct mdev_state *mdev_state;
>>>    	int nr_ports = mdev_get_type_group_id(mdev) + 1;
>>> +	int avail_ports = atomic_read(&mdev_avail_ports);
>>>    	int ret;
>>>    
>>> +	do {
>>> +		if (avail_ports < nr_ports)
>>> +			return -ENOSPC;
>>> +	} while (!atomic_try_cmpxchg(&mdev_avail_ports,
>>> +				     &avail_ports, avail_ports - nr_ports));
>>> +
>>>    	mdev_state = kzalloc(sizeof(struct mdev_state), GFP_KERNEL);
>>> -	if (mdev_state == NULL)
>>> +	if (mdev_state == NULL) {
>>> +		atomic_add(nr_ports, &mdev_avail_ports);
>>>    		return -ENOMEM;
>>> +	}
>>>    
>>>    	vfio_init_group_dev(&mdev_state->vdev, &mdev->dev, &mtty_dev_ops);
>>>    
>>> @@ -724,6 +733,7 @@ static int mtty_probe(struct mdev_device *mdev)
>>>    
>>>    	if (mdev_state->vconfig == NULL) {
>>>    		kfree(mdev_state);
>>> +		atomic_add(nr_ports, &mdev_avail_ports);
>>>    		return -ENOMEM;
>>>    	}
>>>    
>>> @@ -735,9 +745,9 @@ static int mtty_probe(struct mdev_device *mdev)
>>>    	ret = vfio_register_group_dev(&mdev_state->vdev);
>>>    	if (ret) {
>>>    		kfree(mdev_state);
>>> +		atomic_add(nr_ports, &mdev_avail_ports);
>>>    		return ret;
>>>    	}
>>> -	atomic_add(mdev_state->nr_ports, &mdev_used_ports);
>>>    
>>>    	dev_set_drvdata(&mdev->dev, mdev_state);
>>>    	return 0;
>>> @@ -746,12 +756,13 @@ static int mtty_probe(struct mdev_device *mdev)
>>>    static void mtty_remove(struct mdev_device *mdev)
>>>    {
>>>    	struct mdev_state *mdev_state = dev_get_drvdata(&mdev->dev);
>>> +	int nr_ports = mdev_state->nr_ports;
>>>    
>>> -	atomic_sub(mdev_state->nr_ports, &mdev_used_ports);
>>>    	vfio_unregister_group_dev(&mdev_state->vdev);
>>>    
>>>    	kfree(mdev_state->vconfig);
>>>    	kfree(mdev_state);
>>> +	atomic_add(nr_ports, &mdev_avail_ports);
>>>    }
>>>    
>>>    static int mtty_reset(struct mdev_state *mdev_state)
>>> @@ -1271,8 +1282,7 @@ static ssize_t available_instances_show(struct mdev_type *mtype,
>>>    {
>>>    	unsigned int ports = mtype_get_type_group_id(mtype) + 1;
>>>    
>>> -	return sprintf(buf, "%d\n",
>>> -		       (MAX_MTTYS - atomic_read(&mdev_used_ports)) / ports);
>>> +	return sprintf(buf, "%d\n", atomic_read(&mdev_avail_ports) / ports);
>>>    }
>>>    
>>>    static MDEV_TYPE_ATTR_RO(available_instances);
>>>
>>>    
>>
> 

  reply	other threads:[~2021-06-28 19:52 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-25 21:26 [PATCH] vfio/mtty: Enforce available_instances Alex Williamson
2021-06-27 23:20 ` Jason Gunthorpe
2021-06-28 14:23 ` Cornelia Huck
2021-06-28 17:49 ` Kirti Wankhede
2021-06-28 18:56   ` Alex Williamson
2021-06-28 19:52     ` Kirti Wankhede [this message]
2021-06-28 20:09       ` Alex Williamson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=641a865f-a45b-10ed-8287-3759191a9686@nvidia.com \
    --to=kwankhede@nvidia.com \
    --cc=alex.williamson@redhat.com \
    --cc=cohuck@redhat.com \
    --cc=jgg@nvidia.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.