All of lore.kernel.org
 help / color / mirror / Atom feed
From: Christian Lamparter <chunkeey@gmail.com>
To: netdev@vger.kernel.org
Cc: "David S . Miller" <davem@davemloft.net>,
	Florian Fainelli <f.fainelli@gmail.com>
Subject: [PATCH v2 3/4] net: emac: remove IBM_EMAC_RX_SKB_HEADROOM
Date: Mon, 22 Oct 2018 13:04:13 +0200	[thread overview]
Message-ID: <6499b5b407dce973ec3f19fbfb62f7aa21ebf0f6.1540206214.git.chunkeey@gmail.com> (raw)
In-Reply-To: <617f509eed6c844ffd2442b2c4b46b3fe6bc580a.1540206214.git.chunkeey@gmail.com>

The EMAC driver had a custom IBM_EMAC_RX_SKB_HEADROOM
Kconfig option that reserved additional skb headroom for RX.
This patch removes the option and migrates the code
to use napi_alloc_skb() and netdev_alloc_skb_ip_align()
in its place.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
---
 drivers/net/ethernet/ibm/emac/Kconfig | 12 ------
 drivers/net/ethernet/ibm/emac/core.c  | 57 +++++++++++++++++++--------
 drivers/net/ethernet/ibm/emac/core.h  | 10 ++---
 3 files changed, 43 insertions(+), 36 deletions(-)

diff --git a/drivers/net/ethernet/ibm/emac/Kconfig b/drivers/net/ethernet/ibm/emac/Kconfig
index 90d49191beb3..eacf7e141fdc 100644
--- a/drivers/net/ethernet/ibm/emac/Kconfig
+++ b/drivers/net/ethernet/ibm/emac/Kconfig
@@ -28,18 +28,6 @@ config IBM_EMAC_RX_COPY_THRESHOLD
 	depends on IBM_EMAC
 	default "256"
 
-config IBM_EMAC_RX_SKB_HEADROOM
-	int "Additional RX skb headroom (bytes)"
-	depends on IBM_EMAC
-	default "0"
-	help
-	  Additional receive skb headroom. Note, that driver
-	  will always reserve at least 2 bytes to make IP header
-	  aligned, so usually there is no need to add any additional
-	  headroom.
-
-	  If unsure, set to 0.
-
 config IBM_EMAC_DEBUG
 	bool "Debugging"
 	depends on IBM_EMAC
diff --git a/drivers/net/ethernet/ibm/emac/core.c b/drivers/net/ethernet/ibm/emac/core.c
index b5c4b7d3057d..388443e08674 100644
--- a/drivers/net/ethernet/ibm/emac/core.c
+++ b/drivers/net/ethernet/ibm/emac/core.c
@@ -1075,7 +1075,9 @@ static int emac_resize_rx_ring(struct emac_instance *dev, int new_mtu)
 
 	/* Second pass, allocate new skbs */
 	for (i = 0; i < NUM_RX_BUFF; ++i) {
-		struct sk_buff *skb = alloc_skb(rx_skb_size, GFP_ATOMIC);
+		struct sk_buff *skb;
+
+		skb = netdev_alloc_skb_ip_align(dev->ndev, rx_skb_size);
 		if (!skb) {
 			ret = -ENOMEM;
 			goto oom;
@@ -1084,7 +1086,6 @@ static int emac_resize_rx_ring(struct emac_instance *dev, int new_mtu)
 		BUG_ON(!dev->rx_skb[i]);
 		dev_kfree_skb(dev->rx_skb[i]);
 
-		skb_reserve(skb, EMAC_RX_SKB_HEADROOM + 2);
 		dev->rx_desc[i].data_ptr =
 		    dma_map_single(&dev->ofdev->dev, skb->data - 2, rx_sync_size,
 				   DMA_FROM_DEVICE) + 2;
@@ -1205,20 +1206,18 @@ static void emac_clean_rx_ring(struct emac_instance *dev)
 	}
 }
 
-static inline int emac_alloc_rx_skb(struct emac_instance *dev, int slot,
-				    gfp_t flags)
+static inline int
+__emac_prepare_rx_skb(struct sk_buff *skb, struct emac_instance *dev, int slot)
 {
-	struct sk_buff *skb = alloc_skb(dev->rx_skb_size, flags);
 	if (unlikely(!skb))
 		return -ENOMEM;
 
 	dev->rx_skb[slot] = skb;
 	dev->rx_desc[slot].data_len = 0;
 
-	skb_reserve(skb, EMAC_RX_SKB_HEADROOM + 2);
 	dev->rx_desc[slot].data_ptr =
-	    dma_map_single(&dev->ofdev->dev, skb->data - 2, dev->rx_sync_size,
-			   DMA_FROM_DEVICE) + 2;
+	    dma_map_single(&dev->ofdev->dev, skb->data - NET_IP_ALIGN,
+			   dev->rx_sync_size, DMA_FROM_DEVICE) + NET_IP_ALIGN;
 	wmb();
 	dev->rx_desc[slot].ctrl = MAL_RX_CTRL_EMPTY |
 	    (slot == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0);
@@ -1226,6 +1225,27 @@ static inline int emac_alloc_rx_skb(struct emac_instance *dev, int slot,
 	return 0;
 }
 
+static inline int
+emac_alloc_rx_skb(struct emac_instance *dev, int slot)
+{
+	struct sk_buff *skb;
+
+	skb = __netdev_alloc_skb_ip_align(dev->ndev, dev->rx_skb_size,
+					  GFP_KERNEL);
+
+	return __emac_prepare_rx_skb(skb, dev, slot);
+}
+
+static inline int
+emac_alloc_rx_skb_napi(struct emac_instance *dev, int slot)
+{
+	struct sk_buff *skb;
+
+	skb = napi_alloc_skb(&dev->mal->napi, dev->rx_skb_size);
+
+	return __emac_prepare_rx_skb(skb, dev, slot);
+}
+
 static void emac_print_link_status(struct emac_instance *dev)
 {
 	if (netif_carrier_ok(dev->ndev))
@@ -1256,7 +1276,7 @@ static int emac_open(struct net_device *ndev)
 
 	/* Allocate RX ring */
 	for (i = 0; i < NUM_RX_BUFF; ++i)
-		if (emac_alloc_rx_skb(dev, i, GFP_KERNEL)) {
+		if (emac_alloc_rx_skb(dev, i)) {
 			printk(KERN_ERR "%s: failed to allocate RX ring\n",
 			       ndev->name);
 			goto oom;
@@ -1778,8 +1798,9 @@ static inline void emac_recycle_rx_skb(struct emac_instance *dev, int slot,
 	DBG2(dev, "recycle %d %d" NL, slot, len);
 
 	if (len)
-		dma_map_single(&dev->ofdev->dev, skb->data - 2,
-			       EMAC_DMA_ALIGN(len + 2), DMA_FROM_DEVICE);
+		dma_map_single(&dev->ofdev->dev, skb->data - NET_IP_ALIGN,
+			       SKB_DATA_ALIGN(len + NET_IP_ALIGN),
+			       DMA_FROM_DEVICE);
 
 	dev->rx_desc[slot].data_len = 0;
 	wmb();
@@ -1887,16 +1908,18 @@ static int emac_poll_rx(void *param, int budget)
 		}
 
 		if (len && len < EMAC_RX_COPY_THRESH) {
-			struct sk_buff *copy_skb =
-			    alloc_skb(len + EMAC_RX_SKB_HEADROOM + 2, GFP_ATOMIC);
+			struct sk_buff *copy_skb;
+
+			copy_skb = napi_alloc_skb(&dev->mal->napi, len);
 			if (unlikely(!copy_skb))
 				goto oom;
 
-			skb_reserve(copy_skb, EMAC_RX_SKB_HEADROOM + 2);
-			memcpy(copy_skb->data - 2, skb->data - 2, len + 2);
+			memcpy(copy_skb->data - NET_IP_ALIGN,
+			       skb->data - NET_IP_ALIGN,
+			       len + NET_IP_ALIGN);
 			emac_recycle_rx_skb(dev, slot, len);
 			skb = copy_skb;
-		} else if (unlikely(emac_alloc_rx_skb(dev, slot, GFP_ATOMIC)))
+		} else if (unlikely(emac_alloc_rx_skb_napi(dev, slot)))
 			goto oom;
 
 		skb_put(skb, len);
@@ -1917,7 +1940,7 @@ static int emac_poll_rx(void *param, int budget)
 	sg:
 		if (ctrl & MAL_RX_CTRL_FIRST) {
 			BUG_ON(dev->rx_sg_skb);
-			if (unlikely(emac_alloc_rx_skb(dev, slot, GFP_ATOMIC))) {
+			if (unlikely(emac_alloc_rx_skb_napi(dev, slot))) {
 				DBG(dev, "rx OOM %d" NL, slot);
 				++dev->estats.rx_dropped_oom;
 				emac_recycle_rx_skb(dev, slot, 0);
diff --git a/drivers/net/ethernet/ibm/emac/core.h b/drivers/net/ethernet/ibm/emac/core.h
index 0bcfe952a3cf..0faeb7c7e958 100644
--- a/drivers/net/ethernet/ibm/emac/core.h
+++ b/drivers/net/ethernet/ibm/emac/core.h
@@ -68,22 +68,18 @@ static inline int emac_rx_size(int mtu)
 		return mal_rx_size(ETH_DATA_LEN + EMAC_MTU_OVERHEAD);
 }
 
-#define EMAC_DMA_ALIGN(x)		ALIGN((x), dma_get_cache_alignment())
-
-#define EMAC_RX_SKB_HEADROOM		\
-	EMAC_DMA_ALIGN(CONFIG_IBM_EMAC_RX_SKB_HEADROOM)
-
 /* Size of RX skb for the given MTU */
 static inline int emac_rx_skb_size(int mtu)
 {
 	int size = max(mtu + EMAC_MTU_OVERHEAD, emac_rx_size(mtu));
-	return EMAC_DMA_ALIGN(size + 2) + EMAC_RX_SKB_HEADROOM;
+
+	return SKB_DATA_ALIGN(size + NET_SKB_PAD + NET_IP_ALIGN);
 }
 
 /* RX DMA sync size */
 static inline int emac_rx_sync_size(int mtu)
 {
-	return EMAC_DMA_ALIGN(emac_rx_size(mtu) + 2);
+	return SKB_DATA_ALIGN(emac_rx_size(mtu) + NET_IP_ALIGN);
 }
 
 /* Driver statistcs is split into two parts to make it more cache friendly:
-- 
2.19.1

  reply	other threads:[~2018-10-22 19:22 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-22 11:04 [PATCH v2 1/4] net: emac: implement 802.1Q VLAN TX tagging support Christian Lamparter
2018-10-22 11:04 ` [PATCH v2 2/4] net: emac: implement TCP segmentation offload (TSO) Christian Lamparter
2018-10-22 11:04   ` Christian Lamparter [this message]
2018-10-22 11:04     ` [PATCH v2 4/4] net: emac: add deprecation notice to emac custom phy users Christian Lamparter
2018-10-23  2:55   ` [PATCH v2 2/4] net: emac: implement TCP segmentation offload (TSO) David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6499b5b407dce973ec3f19fbfb62f7aa21ebf0f6.1540206214.git.chunkeey@gmail.com \
    --to=chunkeey@gmail.com \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.