From: "Torsten Kaiser" <just.for.lkml@googlemail.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org
Subject: Re: 2.6.23-mm1
Date: Fri, 12 Oct 2007 14:46:31 +0200 [thread overview]
Message-ID: <64bb37e0710120546s76b422fevabddd920506a3c96@mail.gmail.com> (raw)
In-Reply-To: <20071012013729.ada2127b.akpm@linux-foundation.org>
On 10/12/07, Andrew Morton <akpm@linux-foundation.org> wrote:
> On Fri, 12 Oct 2007 10:31:42 +0200 "Torsten Kaiser" <just.for.lkml@googlemail.com> wrote:
> > But I did add the patch from http://lkml.org/lkml/2007/10/11/48 as my
> > personal hotfix.
>
> I think Jeff has that in hand?
I would more expect Jens, as the breakage in ata_sg_is_last comes
through the sglist patches from the block gittree.
That comment was more to say, that this patch does not blow up. ;)
> > Oct 12 10:23:03 treogen smartd[6091]: Device: /dev/sdc, not found in
> > smartd database.
>
> hm.
smartd always said that. Never thought that it would matter.
And it also say this about the other two identical drives that are
connected via the SiI 3132 instead the MCP55. And until now smartd
worked with this drive, logging temperature changes into
/var/log/messages.
hm: Even with the warnings below it does that:
Oct 12 10:53:25 treogen smartd[6095]: Device: /dev/sdc, SMART Usage
Attribute: 195 Hardware_ECC_Recovered changed from 57 to 58
Oct 12 11:23:26 treogen smartd[6095]: Device: /dev/sdc, SMART Usage
Attribute: 190 Temperature_Celsius changed from 51 to 50
Oct 12 11:23:26 treogen smartd[6095]: Device: /dev/sdc, SMART Usage
Attribute: 194 Temperature_Celsius changed from 49 to 50
Oct 12 13:23:25 treogen smartd[6095]: Device: /dev/sdc, SMART Usage
Attribute: 195 Hardware_ECC_Recovered changed from 58 to 57
But I have not seen any new WARNINGs...
Torsten
> > Oct 12 10:23:03 treogen [ 105.990000] WARNING: at
> > drivers/ata/libata-core.c:5752 ata_qc_issue()
>
> Let's cc linux-ide.
>
> > Oct 12 10:23:03 treogen [ 105.990000]
> > Oct 12 10:23:03 treogen [ 105.990000] Call Trace:
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff804442ef>]
> > ata_qc_issue+0x47f/0x540
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff80432e60>] scsi_done+0x0/0x20
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff80449c80>]
> > ata_scsi_flush_xlat+0x0/0x30
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff8044a6ea>]
> > ata_scsi_translate+0xfa/0x180
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff80432e60>] scsi_done+0x0/0x20
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff8044d84d>]
> > ata_scsi_queuecmd+0x12d/0x210
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff804333d0>]
> > scsi_dispatch_cmd+0x150/0x250
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff804391f1>]
> > scsi_request_fn+0x1f1/0x360
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff8039b827>]
> > elv_insert+0x167/0x250
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff803a0ac2>]
> > __make_request+0xe2/0x670
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff8039d560>]
> > generic_make_request+0x1d0/0x3c0
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff802bc1b9>]
> > bio_alloc_bioset+0xb9/0x140
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff802bc061>]
> > __bio_clone+0x91/0xc0
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff8039d7b6>]
> > submit_bio+0x66/0xf0
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff804cc06e>]
> > write_page+0x16e/0x2c0
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff80231b01>]
> > dequeue_task_fair+0x51/0xb0
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff804c482d>]
> > md_update_sb+0x18d/0x320
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff804caa10>] md_thread+0x0/0x100
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff804c9065>]
> > md_check_recovery+0x1f5/0x550
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff804caa10>] md_thread+0x0/0x100
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff804bf1d3>] raid5d+0x23/0x490
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff8023eb12>]
> > try_to_del_timer_sync+0x52/0x60
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff805b0057>]
> > schedule_timeout+0x67/0xd0
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff8023e740>]
> > process_timeout+0x0/0x10
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff805b004a>]
> > schedule_timeout+0x5a/0xd0
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff804caa10>] md_thread+0x0/0x100
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff804caa40>]
> > md_thread+0x30/0x100
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff8024a710>]
> > autoremove_wake_function+0x0/0x30
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff804caa10>] md_thread+0x0/0x100
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff8024a32b>] kthread+0x4b/0x80
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff8020c9d8>] child_rip+0xa/0x12
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff8024a2e0>] kthread+0x0/0x80
> > Oct 12 10:23:03 treogen [ 105.990000] [<ffffffff8020c9ce>] child_rip+0x0/0x12
> > Oct 12 10:23:03 treogen [ 105.990000]
> > Oct 12 10:23:13 treogen [ 115.940000] ata3.00: exception Emask 0x0
> > SAct 0x0 SErr 0x0 action 0x2 frozen
> > Oct 12 10:23:13 treogen [ 115.940000] ata3.00: cmd
> > b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0
> > Oct 12 10:23:13 treogen [ 115.940000] res
> > 40/00:00:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
> > Oct 12 10:23:13 treogen [ 115.940000] ata3.00: status: { DRDY }
> > Oct 12 10:23:14 treogen [ 116.270000] ata3: soft resetting link
> > Oct 12 10:23:14 treogen [ 116.430000] ata3: SATA link up 3.0 Gbps
> > (SStatus 123 SControl 300)
> > Oct 12 10:23:14 treogen [ 116.740000] ata3.00: configured for UDMA/133
> > Oct 12 10:23:14 treogen [ 116.740000] ata3: EH complete
> > Oct 12 10:23:14 treogen [ 116.740000] WARNING: at
> > drivers/ata/libata-core.c:5752 ata_qc_issue()
> > Oct 12 10:23:14 treogen [ 116.740000]
> > Oct 12 10:23:14 treogen [ 116.740000] Call Trace:
> > Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff804442ef>]
> > ata_qc_issue+0x47f/0x540
> > Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff80432e60>] scsi_done+0x0/0x20
> > Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff80449c80>]
> > ata_scsi_flush_xlat+0x0/0x30
> > Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff8044a6ea>]
> > ata_scsi_translate+0xfa/0x180
> > Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff80432e60>] scsi_done+0x0/0x20
> > Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff8044d84d>]
> > ata_scsi_queuecmd+0x12d/0x210
> > Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff804333d0>]
> > scsi_dispatch_cmd+0x150/0x250
> > Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff804391f1>]
> > scsi_request_fn+0x1f1/0x360
> > Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff80436b80>]
> > scsi_error_handler+0x0/0x310
> > Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff8039fe73>]
> > blk_run_queue+0x43/0x80
> > Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff80438659>]
> > scsi_run_host_queues+0x19/0x40
> > Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff80436d54>]
> > scsi_error_handler+0x1d4/0x310
> > Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff80436b80>]
> > scsi_error_handler+0x0/0x310
> > Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff8024a32b>] kthread+0x4b/0x80
> > Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff8020c9d8>] child_rip+0xa/0x12
> > Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff8024a2e0>] kthread+0x0/0x80
> > Oct 12 10:23:14 treogen [ 116.740000] [<ffffffff8020c9ce>] child_rip+0x0/0x12
> > Oct 12 10:23:14 treogen [ 116.740000]
> > Oct 12 10:23:14 treogen [ 116.770000] sd 2:0:0:0: [sdc] 625142448
> > 512-byte hardware sectors (320073 MB)
> > Oct 12 10:23:14 treogen [ 116.770000] sd 2:0:0:0: [sdc] Write Protect is off
> > Oct 12 10:23:14 treogen [ 116.770000] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
> > Oct 12 10:23:14 treogen [ 116.770000] sd 2:0:0:0: [sdc] Write cache:
> > enabled, read cache: enabled, doesn't support DPO or FUA
> > Oct 12 10:23:24 treogen [ 126.740000] ata3.00: exception Emask 0x0
> > SAct 0x0 SErr 0x0 action 0x2 frozen
> > Oct 12 10:23:24 treogen [ 126.740000] ata3.00: cmd
> > b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0
> > Oct 12 10:23:24 treogen [ 126.740000] res
> > 40/00:00:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
> > Oct 12 10:23:24 treogen [ 126.740000] ata3.00: status: { DRDY }
> > Oct 12 10:23:24 treogen [ 127.070000] ata3: soft resetting link
> > Oct 12 10:23:25 treogen [ 127.230000] ata3: SATA link up 3.0 Gbps
> > (SStatus 123 SControl 300)
> > Oct 12 10:23:25 treogen [ 127.370000] ata3.00: configured for UDMA/133
> > Oct 12 10:23:25 treogen [ 127.370000] ata3: EH complete
> > Oct 12 10:23:25 treogen [ 127.370000] sd 2:0:0:0: [sdc] 625142448
> > 512-byte hardware sectors (320073 MB)
> > Oct 12 10:23:25 treogen [ 127.370000] sd 2:0:0:0: [sdc] Write Protect is off
> > Oct 12 10:23:25 treogen [ 127.370000] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
> > Oct 12 10:23:25 treogen [ 127.370000] sd 2:0:0:0: [sdc] Write cache:
> > enabled, read cache: enabled, doesn't support DPO or FUA
> > Oct 12 10:23:25 treogen smartd[6091]: Device: /dev/sdc, is SMART
> > capable. Adding to "monitor" list.
> > ... but I can still access the filesystem and the RAID device on that drive.
> > (sdc is MAXTOR STM332082 3.AA sata-drive on a MCP55 using sata_nv with
> > swncq activated)
> >
> > Torsten
>
next prev parent reply other threads:[~2007-10-12 12:46 UTC|newest]
Thread overview: 164+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-12 4:31 2.6.23-mm1 Andrew Morton
2007-10-12 5:03 ` 2.6.23-mm1 KAMEZAWA Hiroyuki
2007-10-12 6:42 ` 2.6.23-mm1 Andrew Morton
2007-10-12 6:46 ` 2.6.23-mm1 Al Viro
2007-10-12 7:13 ` 2.6.23-mm1 Andrew Morton
2007-10-12 18:06 ` [PATCH net-2.6] uml: hard_header fix Stephen Hemminger
2007-10-12 19:04 ` 2.6.23-mm1 Al Viro
2007-10-12 19:47 ` 2.6.23-mm1 thread exit_group issue Mathieu Desnoyers
2007-10-12 20:01 ` Andrew Morton
2007-10-13 1:03 ` Andrew Morton
2007-10-13 11:48 ` Oleg Nesterov
2007-10-13 12:02 ` Oleg Nesterov
2007-10-13 17:49 ` Andrew Morton
2007-10-14 4:04 ` Mathieu Desnoyers
2007-10-12 7:25 ` 2.6.23-mm1 KAMEZAWA Hiroyuki
2007-10-12 8:36 ` 2.6.23-mm1 Sam Ravnborg
2007-10-12 8:31 ` 2.6.23-mm1 Torsten Kaiser
2007-10-12 8:37 ` 2.6.23-mm1 Andrew Morton
2007-10-12 12:46 ` Torsten Kaiser [this message]
2007-10-13 8:01 ` 2.6.23-mm1 Torsten Kaiser
2007-10-13 10:55 ` 2.6.23-mm1 Jeff Garzik
2007-10-13 12:03 ` 2.6.23-mm1 Torsten Kaiser
2007-10-13 12:19 ` 2.6.23-mm1 Jeff Garzik
2007-10-13 14:32 ` 2.6.23-mm1 Torsten Kaiser
2007-10-13 14:40 ` 2.6.23-mm1 Torsten Kaiser
2007-10-13 15:13 ` 2.6.23-mm1 Torsten Kaiser
2007-10-13 17:48 ` 2.6.23-mm1 Jeff Garzik
2007-10-13 18:05 ` 2.6.23-mm1 Torsten Kaiser
2007-10-13 18:18 ` 2.6.23-mm1 Andrew Morton
2007-10-13 18:35 ` 2.6.23-mm1 Torsten Kaiser
2007-10-14 11:54 ` 2.6.23-mm1 Torsten Kaiser
2007-10-14 18:39 ` 2.6.23-mm1 Andrew Morton
2007-10-14 19:12 ` 2.6.23-mm1 Torsten Kaiser
2007-10-14 19:26 ` 2.6.23-mm1 Andrew Morton
2007-10-14 19:26 ` 2.6.23-mm1 Andrew Morton
2007-10-14 19:40 ` 2.6.23-mm1 Torsten Kaiser
2007-10-14 22:03 ` 2.6.23-mm1 Milan Broz
2007-10-14 22:03 ` 2.6.23-mm1 Milan Broz
2007-10-15 6:50 ` 2.6.23-mm1 Jens Axboe
2007-10-15 6:50 ` 2.6.23-mm1 Jens Axboe
2007-10-15 7:31 ` 2.6.23-mm1 Neil Brown
2007-10-15 7:31 ` 2.6.23-mm1 Neil Brown
2007-10-15 7:45 ` 2.6.23-mm1 Jens Axboe
2007-10-15 7:45 ` 2.6.23-mm1 Jens Axboe
2007-10-13 18:41 ` 2.6.23-mm1 Jeff Garzik
2007-10-12 6:48 ` 2.6.23-mm1 Cedric Le Goater
2007-10-12 6:51 ` [PATCH] add missing parenthesis in cfe_writeblk() macro Mariusz Kozlowski
2007-10-12 7:44 ` 2.6.23-mm1 - build failure on axonram Kamalesh Babulal
2007-10-12 9:42 ` Build Failure (Was Re: 2.6.23-mm1) Dhaval Giani
2007-10-12 9:42 ` Dhaval Giani
2007-10-12 20:38 ` 2.6.23-mm1 Laurent Riffard
2007-10-12 21:00 ` 2.6.23-mm1 Andrew Morton
2007-10-13 9:29 ` [PATCH] Reiser4: Drop 'size' argument from bio_endio and bi_end_io Laurent Riffard
2007-10-13 10:10 ` Jens Axboe
2007-10-14 13:09 ` Edward Shishkin
2007-10-15 16:13 ` 2.6.23-mm1 Zan Lynx
2007-10-12 21:32 ` 2.6.23-mm1 Rafael J. Wysocki
2007-10-15 16:09 ` 2.6.23-mm1 Mark Gross
2007-10-15 20:40 ` 2.6.23-mm1 Rafael J. Wysocki
2007-10-16 19:58 ` 2.6.23-mm1 Mark Gross
2007-10-16 20:28 ` 2.6.23-mm1 Rafael J. Wysocki
2007-10-16 23:31 ` 2.6.23-mm1 Mark Gross
2007-10-17 21:15 ` [PATCH] static initialization with blocking notifiers. was :wqRe: 2.6.23-mm1 Mark Gross
2007-10-17 17:21 ` [PATCH] static initialization and blocking notification for pm_qos... was 2.6.23-mm1 Mark Gross
2007-10-13 4:35 ` 2.6.23-mm1 - Build failure on rgmii Kamalesh Babulal
2007-10-13 4:44 ` 2.6.23-mm1 - build failure with advansys Kamalesh Babulal
2007-10-13 6:52 ` Andrew Morton
2007-10-13 6:52 ` Andrew Morton
2007-10-18 0:07 ` Paul Mackerras
2007-10-18 0:07 ` Paul Mackerras
2007-10-18 1:48 ` Matthew Wilcox
2007-10-18 1:48 ` Matthew Wilcox
2007-10-13 15:50 ` 2.6.23-mm1 pm_prepare() and _finish() w/ args vs. without Joseph Fannin
2007-10-13 17:22 ` Rafael J. Wysocki
2007-10-13 18:40 ` Joseph Fannin
2007-10-13 19:13 ` Rafael J. Wysocki
2007-10-14 19:47 ` Joseph Fannin
2007-10-14 20:20 ` Rafael J. Wysocki
2007-10-15 20:55 ` Rafael J. Wysocki
2007-10-16 17:29 ` Joseph Fannin
2007-10-13 17:12 ` 2.6.23-mm1 Gabriel C
2007-10-13 18:01 ` 2.6.23-mm1 Andrew Morton
2007-10-13 18:08 ` 2.6.23-mm1 Gabriel C
2007-10-15 16:28 ` 2.6.23-mm1 Dave Hansen
2007-10-13 17:58 ` Suspend Broken (Re: 2.6.23-mm1) Dhaval Giani
2007-10-13 18:33 ` Rafael J. Wysocki
2007-10-14 4:26 ` Dhaval Giani
2007-10-14 14:19 ` Rafael J. Wysocki
2007-10-13 22:11 ` [2.6.23-mm1] CONFIG_LOCALVERSION handling broken Tilman Schmidt
2007-10-17 20:27 ` Sam Ravnborg
2007-10-17 23:06 ` Tilman Schmidt
2007-10-27 15:19 ` Tilman Schmidt
2007-10-27 15:28 ` Sam Ravnborg
2007-10-14 22:34 ` 2.6.23-mm1: BUG in reiserfs_delete_xattrs Laurent Riffard
2007-10-14 22:34 ` Laurent Riffard
2007-10-15 8:40 ` Christoph Hellwig
2007-10-15 18:31 ` Jeff Mahoney
2007-10-15 18:31 ` Jeff Mahoney
2007-10-15 18:31 ` Jeff Mahoney
2007-10-15 20:06 ` Laurent Riffard
2007-10-15 20:06 ` Laurent Riffard
2007-10-15 20:23 ` Jeff Mahoney
2007-10-15 20:23 ` Jeff Mahoney
2007-10-17 8:59 ` Christoph Hellwig
2007-10-17 8:58 ` Christoph Hellwig
2007-10-17 14:55 ` Jeff Mahoney
2007-10-17 14:55 ` Jeff Mahoney
2007-10-17 14:55 ` Jeff Mahoney
2007-10-15 19:51 ` Laurent Riffard
2007-10-15 19:51 ` Laurent Riffard
2007-10-15 19:51 ` Laurent Riffard
2007-10-15 6:18 ` [PATCH] Add irq protection in the percpu-counters cpu-hotplug-callback path Gautham R Shenoy
2007-10-15 12:28 ` nfs mmap adventure (was: 2.6.23-mm1) Peter Zijlstra
2007-10-15 15:43 ` Trond Myklebust
2007-10-15 14:06 ` David Howells
2007-10-15 15:51 ` Trond Myklebust
2007-10-15 16:38 ` Peter Zijlstra
2007-10-15 23:27 ` David Howells
2007-10-16 1:46 ` Nick Piggin
2007-10-16 7:18 ` 2.6.23-mm1 - regression- PowerPC link failure at arch/powerpc/kernel/head_64.o Kamalesh Babulal
2007-10-16 7:28 ` Andrew Morton
2007-10-16 7:44 ` Kamalesh Babulal
2007-10-21 6:42 ` Kamalesh Babulal
2007-10-27 5:05 ` Stephen Rothwell
2007-10-17 7:01 ` 2.6.23-mm1 KAMEZAWA Hiroyuki
2007-10-17 9:02 ` 2.6.23-mm1 Andrew Morton
2007-10-17 9:10 ` 2.6.23-mm1 Jiri Kosina
2007-10-17 9:36 ` 2.6.23-mm1 KAMEZAWA Hiroyuki
2007-10-17 11:42 ` 2.6.23-mm1 Jiri Kosina
2007-10-17 12:33 ` 2.6.23-mm1 KAMEZAWA Hiroyuki
2007-10-19 9:07 ` PIE randomization (was Re: 2.6.23-mm1) Jiri Kosina
2007-10-19 21:54 ` 2.6.23-mm1 Jiri Kosina
2007-10-17 15:54 ` 2.6.23-mm1 - list_add corruption in cgroup Cedric Le Goater
2007-10-18 15:56 ` Paul Menage
2007-10-19 22:11 ` Paul Menage
2007-10-18 12:06 ` 2.6.23-mm1 - powerpc - Build fails at arch/powerpc/boot/inflate.o Kamalesh Babulal
2007-10-18 12:06 ` Kamalesh Babulal
2007-10-18 12:23 ` Paul Mackerras
2007-10-18 12:23 ` Paul Mackerras
2007-10-18 13:20 ` Kamalesh Babulal
2007-10-18 13:20 ` Kamalesh Babulal
2007-10-20 4:57 ` oops in lbmIODone, fails to boot [Re: 2.6.23-mm1] Mattia Dongili
2007-10-20 5:34 ` Andrew Morton
2007-10-20 12:18 ` Dave Kleikamp
2007-10-21 5:44 ` Mattia Dongili
2007-10-20 5:13 ` 2.6.23-mm1 - autofs broken Rik van Riel
2007-10-20 5:39 ` Andrew Morton
2007-10-20 5:54 ` Rik van Riel
2007-10-20 5:54 ` Rik van Riel
2007-10-20 14:56 ` Rik van Riel
2007-10-22 22:03 ` Dave Hansen
2007-10-22 3:45 ` Ian Kent
2007-10-22 16:46 ` Rik van Riel
2007-10-21 5:58 ` mysqld prevents s2ram [Re: 2.6.23-mm1] Mattia Dongili
2007-10-21 6:28 ` Mattia Dongili
2007-10-21 9:58 ` Pavel Machek
2007-10-21 11:53 ` Rafael J. Wysocki
2007-10-22 18:40 ` kernel panic when running tcpdump Mariusz Kozlowski
2007-10-22 18:40 ` Mariusz Kozlowski
2007-10-22 19:03 ` Andrew Morton
2007-10-22 19:03 ` Andrew Morton
2007-10-22 21:16 ` Mariusz Kozlowski
2007-10-22 21:16 ` Mariusz Kozlowski
-- strict thread matches above, loose matches on Subject: below --
2007-10-12 4:31 2.6.23-mm1 Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=64bb37e0710120546s76b422fevabddd920506a3c96@mail.gmail.com \
--to=just.for.lkml@googlemail.com \
--cc=akpm@linux-foundation.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.