> On Mar 31, 2016, at 8:26 AM, Trevor Woerner <twoerner@gmail.com> wrote:
> 
> On Fri 2016-03-18 @ 10:15:39 AM, David Weisgerber wrote:
>> Hi,
>> did anyone succeed in building an image that runs on Raspberry Pi 3? I set my
>> conf/local.conf to
>> 
>> MACHINE ??= "raspberrypi3"
>> GPU_MEM = "128"
>> DISABLE_OVERSCAN = "1"
>> 
>> and built rpi-basic-image but when booting the Pi 3 up I only see 4
>> raspberries in the top right but nothing else happens. The image works
>> perfectly on a Pi 2 though.
> 
> I'm able to get a raspi3 image running on my Raspberry Pi 3, but my console is
> messed up. Everything works fine via the usb+hdmi ports, but plugging a
> console cable into the GPIO header is messed up.
> 
> It looks like what happens when the baud rate is set incorrectly, but I've
> tried every baud rate in my terminal emulator and it all looks the same
> (messed up).
> 
> Anyone got their console working? The same cable/setup works fine on the
> raspi2 (ttyAMA0) but doesn't work on my raspi3 (ttyS0).

did you try

https://www.mail-archive.com/yocto@yoctoproject.org/msg28476.html

> --
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto