From mboxrd@z Thu Jan 1 00:00:00 1970 From: Adrian Hunter Subject: Re: [PATCH V1 10/11] mmc: tegra: fix CQE resume sequence Date: Fri, 8 Mar 2019 14:59:47 +0200 Message-ID: <67b3bc6f-0cd9-04ef-af7d-ec59462ec2d2@intel.com> References: <1551504025-3541-1-git-send-email-skomatineni@nvidia.com> <1551504025-3541-10-git-send-email-skomatineni@nvidia.com> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1551504025-3541-10-git-send-email-skomatineni@nvidia.com> Content-Language: en-US Sender: linux-kernel-owner@vger.kernel.org To: Sowjanya Komatineni , ulf.hansson@linaro.org, robh+dt@kernel.org, mark.rutland@arm.com, riteshh@codeaurora.org Cc: thierry.reding@gmail.com, jonathanh@nvidia.com, anrao@nvidia.com, linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org, linux-mmc@vger.kernel.org, devicetree@vger.kernel.org List-Id: linux-tegra@vger.kernel.org On 2/03/19 7:20 AM, Sowjanya Komatineni wrote: > Tegra CQHCI/SDHCI design prevents write access to SDHCI block size > register when CQE is enabled and unhalted. > > CQHCI driver enabled CQE prior to invoking sdhci_cqe_enable which > violates this Tegra specific host requirement. > > This patch fixes this by configuring sdhci block registers prior > to CQE unhalt. > > Signed-off-by: Sowjanya Komatineni Acked-by: Adrian Hunter > --- > drivers/mmc/host/sdhci-tegra.c | 71 ++++++++++++++++++++++++++++++++++++------ > 1 file changed, 62 insertions(+), 9 deletions(-) > > diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c > index 2b63626dc2fa..7063cfcdc590 100644 > --- a/drivers/mmc/host/sdhci-tegra.c > +++ b/drivers/mmc/host/sdhci-tegra.c > @@ -1126,23 +1126,75 @@ static void tegra_sdhci_voltage_switch(struct sdhci_host *host) > tegra_host->pad_calib_required = true; > } > > +static void tegra_cqhci_writel(struct cqhci_host *cq_host, u32 val, int reg) > +{ > + struct mmc_host *mmc = cq_host->mmc; > + u8 ctrl; > + ktime_t timeout; > + bool timed_out; > + > + /* > + * During CQE resume/unhalt, CQHCI driver unhalts CQE prior to > + * cqhci_host_ops enable where SDHCI DMA and BLOCK_SIZE registers need > + * to be re-configured. > + * Tegra CQHCI/SDHCI prevents write access to block size register when > + * CQE is unhalted. So handling CQE resume sequence here to configure > + * SDHCI block registers prior to exiting CQE halt state. > + */ > + if (reg == CQHCI_CTL && !(val & CQHCI_HALT) && > + cqhci_readl(cq_host, CQHCI_CTL) & CQHCI_HALT) { > + sdhci_cqe_enable(mmc); > + writel(val, cq_host->mmio + reg); > + timeout = ktime_add_us(ktime_get(), 50); > + while (1) { > + timed_out = ktime_compare(ktime_get(), timeout) > 0; > + ctrl = cqhci_readl(cq_host, CQHCI_CTL); > + if (!(ctrl & CQHCI_HALT) || timed_out) > + break; > + } > + /* > + * CQE usually resumes very quick, but incase if Tegra CQE > + * doesn't resume retry unhalt. > + */ > + if (timed_out) > + writel(val, cq_host->mmio + reg); > + } else { > + writel(val, cq_host->mmio + reg); > + } > +} > + > static void sdhci_tegra_cqe_enable(struct mmc_host *mmc) > { > struct cqhci_host *cq_host = mmc->cqe_private; > - u32 cqcfg = 0; > + u32 val; > > /* > - * Tegra SDMMC Controller design prevents write access to BLOCK_COUNT > - * registers when CQE is enabled. > + * Tegra CQHCI/SDMMC design prevents write access to sdhci block size > + * register when CQE is enabled and unhalted. > + * CQHCI driver enables CQE prior to activation, so disable CQE before > + * programming block size in sdhci controller and enable it back. > */ > - cqcfg = cqhci_readl(cq_host, CQHCI_CFG); > - if (cqcfg & CQHCI_ENABLE) > - cqhci_writel(cq_host, (cqcfg & ~CQHCI_ENABLE), CQHCI_CFG); > + if (!cq_host->activated) { > + val = cqhci_readl(cq_host, CQHCI_CFG); > + if (val & CQHCI_ENABLE) > + cqhci_writel(cq_host, (val & ~CQHCI_ENABLE), > + CQHCI_CFG); > + sdhci_cqe_enable(mmc); > + if (val & CQHCI_ENABLE) > + cqhci_writel(cq_host, val, CQHCI_CFG); > + } > > - sdhci_cqe_enable(mmc); > + /* > + * CMD CRC errors are seen sometimes with some eMMC devices when status > + * command is sent during transfer of last data block which is the > + * default case as send status command block counter (CBC) is 1. > + * So changing send status command block counter (CBC) to 0 to allow > + * send status command only when the data lines are idle. > + */ > + val = cqhci_readl(cq_host, CQHCI_SSC1); > + val &= ~CQHCI_SSC1_CBC_MASK; > + cqhci_writel(cq_host, val, CQHCI_SSC1); > > - if (cqcfg & CQHCI_ENABLE) > - cqhci_writel(cq_host, cqcfg, CQHCI_CFG); > } > > static void sdhci_tegra_dumpregs(struct mmc_host *mmc) > @@ -1167,6 +1219,7 @@ static const struct cqhci_host_ops sdhci_tegra_cqhci_ops = { > .enable = sdhci_tegra_cqe_enable, > .disable = sdhci_cqe_disable, > .dumpregs = sdhci_tegra_dumpregs, > + .write_l = tegra_cqhci_writel, > }; > > static const struct sdhci_ops tegra_sdhci_ops = { >