From mboxrd@z Thu Jan 1 00:00:00 1970 From: Luis Oliveira Subject: Re: [PATCH] i2c: designware: Don't set SCL timings and speed mode when in slave mode Date: Thu, 19 Oct 2017 12:52:45 +0100 Message-ID: <69111a21-8383-07ab-512c-76c80458deab@synopsys.com> References: <20170823134612.26117-1-jarkko.nikula@linux.intel.com> <20171005111825.kbfb4gcvq26wexnq@ninjato> <74ce49f5-8d4d-786c-cf57-24909356e5f5@linux.intel.com> Mime-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Return-path: Received: from smtprelay2.synopsys.com ([198.182.60.111]:56073 "EHLO smtprelay.synopsys.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751680AbdJSLwv (ORCPT ); Thu, 19 Oct 2017 07:52:51 -0400 In-Reply-To: <74ce49f5-8d4d-786c-cf57-24909356e5f5@linux.intel.com> Content-Language: en-US Sender: linux-i2c-owner@vger.kernel.org List-Id: linux-i2c@vger.kernel.org To: Jarkko Nikula , Wolfram Sang , Luis Oliveira Cc: linux-i2c@vger.kernel.org, Andy Shevchenko , Mika Westerberg Hi Jarkko I will try to have my hardware available asap. But for what I saw it should run smoothly. On 19-Oct-17 10:32, Jarkko Nikula wrote: > Hi Luis > > On 10/05/2017 02:18 PM, Wolfram Sang wrote: >> On Wed, Aug 23, 2017 at 04:46:12PM +0300, Jarkko Nikula wrote: >>> According to data sheet SCL timing parameters and DW_IC_CON SPEED mode >>> bits are not used when operating in slave mode. >>> >>> Signed-off-by: Jarkko Nikula >>> --- >>> I've done quick testing with i2c-slave-eeprom and i2cdump over together >>> hooked busses without issues. Would like to hear tested by or comment >>> from Luis though. Patch is not urgent so can wait after vacation etc. >> >> Luis? >> > Do you have possibility test my patch it doesn't break anything? > Regards, Luis