[U-Boot] [PATCH 1/2] mx6cuboxi: consolidate board detection and add som revision checking

[Baruch Siach <baruch@tkos.co.il>]

From: Jon Nettleton <jon@solid-run.com>

In order to properly detect the board the checks need to be done
in a specific order.  Move these tests back into a single enum
function that will always return the proper the board it is checking.

This also adds the best test we have for detecting the rev 1.5 som,
and it simplifies the device-tree filename building.

Signed-off-by: Jon Nettleton <jon@solid-run.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
---
 board/solidrun/mx6cuboxi/mx6cuboxi.c | 136 +++++++++++++++++----------
 include/configs/mx6cuboxi.h          |  24 ++---
 2 files changed, 98 insertions(+), 62 deletions(-)

diff --git a/board/solidrun/mx6cuboxi/mx6cuboxi.c b/board/solidrun/mx6cuboxi/mx6cuboxi.c
index 1fb3c69edeb5..1567cf0c91af 100644
--- a/board/solidrun/mx6cuboxi/mx6cuboxi.c
+++ b/board/solidrun/mx6cuboxi/mx6cuboxi.c
@@ -57,6 +57,13 @@ DECLARE_GLOBAL_DATA_PTR;
 #define ETH_PHY_RESET	IMX_GPIO_NR(4, 15)
 #define USB_H1_VBUS	IMX_GPIO_NR(1, 0)
 
+enum board_type {
+	CUBOXI          = 0x00,
+	HUMMINGBOARD    = 0x01,
+	HUMMINGBOARD2   = 0x02,
+	UNKNOWN         = 0x03,
+};
+
 int dram_init(void)
 {
 	gd->ram_size = imx_ddr_size();
@@ -77,10 +84,17 @@ static iomux_v3_cfg_t const usdhc2_pads[] = {
 	IOMUX_PADS(PAD_SD2_DAT3__SD2_DATA3	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 };
 
-static iomux_v3_cfg_t const hb_cbi_sense[] = {
+static iomux_v3_cfg_t const board_detect[] = {
 	/* These pins are for sensing if it is a CuBox-i or a HummingBoard */
 	IOMUX_PADS(PAD_KEY_ROW1__GPIO4_IO09  | MUX_PAD_CTRL(UART_PAD_CTRL)),
 	IOMUX_PADS(PAD_EIM_DA4__GPIO3_IO04   | MUX_PAD_CTRL(UART_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD4_DAT0__GPIO2_IO08  | MUX_PAD_CTRL(UART_PAD_CTRL)),
+};
+
+static iomux_v3_cfg_t const som_rev_detect[] = {
+	/* These pins are for sensing if it is a CuBox-i or a HummingBoard */
+	IOMUX_PADS(PAD_CSI0_DAT14__GPIO6_IO00  | MUX_PAD_CTRL(UART_PAD_CTRL)),
+	IOMUX_PADS(PAD_CSI0_DAT18__GPIO6_IO04  | MUX_PAD_CTRL(UART_PAD_CTRL)),
 };
 
 static iomux_v3_cfg_t const usb_pads[] = {
@@ -333,88 +347,110 @@ int board_init(void)
 	return ret;
 }
 
-static bool is_hummingboard(void)
+static enum board_type board_type(void)
 {
-	int val1, val2;
+	int val1, val2, val3;
 
-	SETUP_IOMUX_PADS(hb_cbi_sense);
-
-	gpio_direction_input(IMX_GPIO_NR(4, 9));
-	gpio_direction_input(IMX_GPIO_NR(3, 4));
-
-	val1 = gpio_get_value(IMX_GPIO_NR(4, 9));
-	val2 = gpio_get_value(IMX_GPIO_NR(3, 4));
+	SETUP_IOMUX_PADS(board_detect);
 
 	/*
 	 * Machine selection -
-	 * Machine        val1, val2
-	 * -------------------------
-	 * HB2            x     x
-	 * HB rev 3.x     x     0
-	 * CBi            0     1
-	 * HB             1     1
+	 * Machine      val1, val2, val3
+	 * ----------------------------
+	 * HB2            x     x    0
+	 * HB rev 3.x     x     0    x
+	 * CBi            0     1    x
+	 * HB             1     1    x
 	 */
 
-	if (val2 == 0)
-		return true;
-	else if (val1 == 0)
-		return false;
-	else
-		return true;
-}
+	gpio_direction_input(IMX_GPIO_NR(2, 8));
+	val3 = gpio_get_value(IMX_GPIO_NR(2, 8));
 
-static bool is_hummingboard2(void)
-{
-	int val1;
+	if (val3 == 0)
+		return HUMMINGBOARD2;
 
-	SETUP_IOMUX_PADS(hb_cbi_sense);
+	gpio_direction_input(IMX_GPIO_NR(3, 4));
+	val2 = gpio_get_value(IMX_GPIO_NR(3, 4));
 
-	gpio_direction_input(IMX_GPIO_NR(2, 8));
+	if (val2 == 0)
+		return HUMMINGBOARD;
 
-        val1 = gpio_get_value(IMX_GPIO_NR(2, 8));
+	gpio_direction_input(IMX_GPIO_NR(4, 9));
+	val1 = gpio_get_value(IMX_GPIO_NR(4, 9));
 
-	/*
-	 * Machine selection -
-	 * Machine        val1
-	 * -------------------
-	 * HB2            0
-	 * HB rev 3.x     x
-	 * CBi            x
-	 * HB             x
-	 */
+	if (val1 == 0) {
+		return CUBOXI;
+	} else {
+		return HUMMINGBOARD;
+	}
+}
+
+static bool is_rev_15_som(void)
+{
+	int val1, val2;
+	SETUP_IOMUX_PADS(som_rev_detect);
 
-	if (val1 == 0)
+	val1 = gpio_get_value(IMX_GPIO_NR(6, 0));
+	val2 = gpio_get_value(IMX_GPIO_NR(6, 4));
+
+	if (val1 == 1 && val2 == 0)
 		return true;
-	else
-		return false;
+
+	return false;
 }
 
 int checkboard(void)
 {
-	if (is_hummingboard2())
-		puts("Board: MX6 Hummingboard2\n");
-	else if (is_hummingboard())
-		puts("Board: MX6 Hummingboard\n");
+	switch (board_type()) {
+	case CUBOXI:
+		puts("Board: MX6 Cubox-i");
+		break;
+	case HUMMINGBOARD:
+		puts("Board: MX6 HummingBoard");
+		break;
+	case HUMMINGBOARD2:
+		puts("Board: MX6 HummingBoard2");
+		break;
+	case UNKNOWN:
+	default:
+		puts("Board: Unknown\n");
+		goto out;
+	}
+
+	if (is_rev_15_som())
+		puts(" (som rev 1.5)\n");
 	else
-		puts("Board: MX6 Cubox-i\n");
+		puts("\n");
 
+out:
 	return 0;
 }
 
 int board_late_init(void)
 {
 #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-	if (is_hummingboard2())
-		env_set("board_name", "HUMMINGBOARD2");
-	else if (is_hummingboard())
+	switch (board_type()) {
+	case CUBOXI:
+		env_set("board_name", "CUBOXI");
+		break;
+	case HUMMINGBOARD:
 		env_set("board_name", "HUMMINGBOARD");
-	else
+		break;
+	case HUMMINGBOARD2:
+		env_set("board_name", "HUMMINGBOARD2");
+		break;
+	case UNKNOWN:
+	default:
 		env_set("board_name", "CUBOXI");
+	}
 
 	if (is_mx6dq())
 		env_set("board_rev", "MX6Q");
 	else
 		env_set("board_rev", "MX6DL");
+
+	if (is_rev_15_som())
+		env_set("som_rev", "V15");
 #endif
 
 	return 0;
diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h
index 6e2137769822..803661cfa843 100644
--- a/include/configs/mx6cuboxi.h
+++ b/include/configs/mx6cuboxi.h
@@ -101,18 +101,18 @@
 			"fi; "	\
 		"fi\0" \
 	"findfdt="\
-		"if test $board_name = HUMMINGBOARD2 && test $board_rev = MX6Q ; then " \
-			"setenv fdtfile imx6q-hummingboard2.dtb; fi; " \
-		"if test $board_name = HUMMINGBOARD2 && test $board_rev = MX6DL ; then " \
-			"setenv fdtfile imx6dl-hummingboard2.dtb; fi; " \
-		"if test $board_name = HUMMINGBOARD && test $board_rev = MX6Q ; then " \
-			"setenv fdtfile imx6q-hummingboard.dtb; fi; " \
-		"if test $board_name = HUMMINGBOARD && test $board_rev = MX6DL ; then " \
-			"setenv fdtfile imx6dl-hummingboard.dtb; fi; " \
-		"if test $board_name = CUBOXI && test $board_rev = MX6Q ; then " \
-			"setenv fdtfile imx6q-cubox-i.dtb; fi; " \
-		"if test $board_name = CUBOXI && test $board_rev = MX6DL ; then " \
-			"setenv fdtfile imx6dl-cubox-i.dtb; fi; " \
+		"if test $board_rev = MX6Q ; then " \
+			"setenv fdtprefix imx6q; fi; " \
+		"if test $board_rev = MX6DL ; then " \
+			"setenv fdtprefix imx6dl; fi; " \
+		"if test $som_rev = V15 ; then " \
+			"setenv fdtsuffix -som-v15; fi; " \
+		"if test $board_name = HUMMINGBOARD2 ; then " \
+			"setenv fdtfile ${fdtprefix}-hummingboard2${fdtsuffix}.dtb; fi; " \
+		"if test $board_name = HUMMINGBOARD ; then " \
+			"setenv fdtfile ${fdtprefix}-hummingboard${fdtsuffix}.dtb; fi; " \
+		"if test $board_name = CUBOXI ; then " \
+			"setenv fdtfile ${fdtprefix}-cubox-i${fdtsuffix}.dtb; fi; " \
 		"if test $fdtfile = undefined; then " \
 			"echo WARNING: Could not determine dtb to use; fi; \0" \
 	BOOTENV
-- 
2.17.1