Re: [Xen-devel] Installing Xen 3.3.1 from sources on Hardy or Lenny.

[Thiago Camargo Martins Cordeiro <thiagocmartinsc@gmail.com>]

[-- Attachment #1.1: Type: text/plain, Size: 4616 bytes --]

Yeah, sure! I have sutbdom working on this setup, here is my domU
configurarion files:

Attached to this mail.

-
Thiago

2009/2/22 Dulloor <dulloor@gmail.com>

> Have you verified this with stubdom ?
> stubdom still doesn't work for me (on hardy) with any vif configuration
> (please see my other mail). Without a vif, there is no problem. Any ideas ?
>
> -dulloor
>
> On Sun, Feb 22, 2009 at 1:22 PM, Thiago Camargo Martins Cordeiro <
> thiagocmartinsc@gmail.com> wrote:
>
>> Hi folks!
>>
>>  This is how I install Xen from sources on Hardy, maybe it work for Lenny
>> too...
>>
>> # Necessary packages to compile Xen (this packages can be purged after the
>> compilation of Xen):
>>
>> aptitude install --without-recommends bcc bin86 build-essential comerr-dev
>> debhelper defoma diffstat dpkg-dev fontconfig fontconfig-config g++ g++-4.2
>> gawk gettext ghostscript graphviz gs-common gsfonts html2text
>> intltool-debian libc6-dev-i386 libc6-i386 libcairo2 libcupsimage2 libcupsys2
>> libcurl4-openssl-dev libdatrie0 libdrm2 libfontconfig1 libfreetype6
>> libgd2-noxpm libgl1-mesa-dev libgl1-mesa-glx libglib2.0-0 libglu1-mesa
>> libglu1-mesa-dev libglu1-xorg-dev libgraphviz4 libgs8 libice6 libidn11-dev
>> libjpeg62 libjpeg62-dev libkadm55 libkpathsea4 libkrb5-dev libldap2-dev
>> libltdl3 libncurses5-dev libpango1.0-0 libpango1.0-common libpaper1 libpcre3
>> libpixman-1-0 libpng12-0 libpoppler2 libpthread-stubs0 libpthread-stubs0-dev
>> libsdl1.2-dev libsm6 libssl-dev libstdc++6-4.2-dev libthai-data libthai0
>> libtiff4 libtimedate-perl libvncserver-dev libvncserver0 libx11-6
>> libx11-data libx11-dev libxau-dev libxau6 libxaw7 libxcb-xlib0
>> libxcb-xlib0-dev libxcb1 libxcb1-dev libxdamage1 libxdmcp-dev libxdmcp6
>> libxext6 libxfixes3 libxft2 libxml2-dev libxmu6 libxpm4 libxrender1 libxt6
>> libxxf86vm1 make mesa-common-dev mercurial patch pciutils-dev pkg-config
>> po-debconf python-all python-all-dev python2.4 python2.4-dev
>> python2.4-minimal quilt tex-common texinfo texlive-base texlive-base-bin
>> texlive-common texlive-doc-base texlive-fonts-recommended texlive-latex-base
>> texlive-latex-recommended transfig ttf-dejavu ttf-dejavu-core
>> ttf-dejavu-extra x11-common x11proto-core-dev x11proto-input-dev
>> x11proto-kb-dev xtrans-dev zlib1g-dev
>>
>>
>> mkdir ~/xen-sources && cd ~/xen-sources
>> wget -c http://bits.xensource.com/oss-xen/release/3.3.1/xen-3.3.1.tar.gz
>> tar xzf xen-3.3.1.tar.gz && cd xen-3.3.1
>> make dist
>> cd dist/ ; ./install.sh
>>
>> # Necessary packages to run Xen after installing it:
>>
>> aptitude install --without-recommends binutils binutils-static
>> bridge-utils debootstrap gcc gcc-4.2 libasound2 libbeecrypt6 libc6-dev
>> libconfig-inifiles-perl libcurl3 libdirectfb-1.0-0 libexpect-perl libgomp1
>> libio-pty-perl libio-stty-perl libneon27 librpm4.4 libsdl1.2debian
>> libsdl1.2debian-alsa libterm-readline-gnu-perl libterm-size-perl
>> libtext-template-perl libxml2 linux-libc-dev linux-restricted-modules-common
>> nvidia-kernel-common perl-doc python-dev python2.5-dev rinse rpm screen
>> sgml-base vnstat xen-shell xen-tools xfsprogs xml-core python-xml
>>
>> # Python XML is obsolete will be removed soon, but for now, the Xen
>> depends on it.
>> echo oldxml >> /usr/lib/python2.5/site-packages/oldxml.pth
>>
>> # Linux 2.6.18.8-xen does not have AppArmor.
>> /etc/init.d/apparmor stop
>> update-rc.d -f apparmor remove
>>
>> # Update modules / make new initramfs image
>> depmod -a 2.6.18.8-xen
>> update-initramfs -k 2.6.18.8-xen -c -u
>>
>> # Edit /boor/grub/menu.lst and configure you Xen boot options, if you
>> wish.
>>
>> #--- menu.lst ---
>> ## Xen hypervisor options to use with the default Xen boot option
>> # xenhopt=dom0_mem=512M
>>
>> ## Xen Linux kernel options to use with the default Xen boot option
>> # xenkopt=console=tty0 nosmp
>> #--- menu.lst
>>
>> # Update Grub's menu:
>> update-grub
>>
>> # Configure the system to start Xen on every boot:
>> update-rc.d xend defaults 20 21
>> update-rc.d xendomains defaults 21 20
>>
>> # Reboot into you new Hypervisor
>> reboot
>>
>> # If you have a root file system of your dom0 on LVM (or even LVM on top
>> of raid1), you probaly can't boot your dom0.
>> # So, if you see this prompt:
>>
>> (initramfs)
>>
>> # Run the following command to continue the system boot at (initramfs)
>> prompt :
>> (initramfs) lvm vgchange -ay
>> (initramfs) exit
>>
>> Welcome to your new hypervisor!
>>
>> Regards,
>> Thiago
>>
>>
>> _______________________________________________
>> Xen-devel mailing list
>> Xen-devel@lists.xensource.com
>> http://lists.xensource.com/xen-devel
>>
>>
>

[-- Attachment #1.2: Type: text/html, Size: 5538 bytes --]

[-- Attachment #2: vsrvMODELO-dm --]
[-- Type: application/octet-stream, Size: 242 bytes --]

kernel = "/usr/lib/xen/boot/ioemu-stubdom.gz"
vif = [ '', 'bridge=xenbr0,mac=00:01:64:da:f2:6d']
disk = [ 'file:/dados/distros/jeos-8.04.1-jeos-i386.iso,hdc:cdrom,r', 'phy:/dev/mapper/HyperVG01-vsrvMODELO--disk1,hda,w' ]
vfb = [ 'type=vnc' ]

[-- Attachment #3: vsrvMODELO-stubdom --]
[-- Type: application/octet-stream, Size: 12226 bytes --]

#  -*- mode: python; -*-
#============================================================================
# Python configuration setup for 'xm create'.
# This script sets the parameters used when a domain is created using 'xm create'.
# You use a separate script for each domain you want to create, or 
# you can set the parameters for the domain on the xm command line.
#============================================================================
#
# This is a version using a stubdomain for device model, see
# xmexample.hvm-dm and README.stubdom for more details
# The differences with xmexample.hvm are marked with "STUBDOM"

#----------------------------------------------------------------------------
# Kernel image file.
kernel = "/usr/lib/xen/boot/hvmloader"

# The domain build function. HVM domain uses 'hvm'.
builder='hvm'

# Initial memory allocation (in megabytes) for the new domain.
#
# WARNING: Creating a domain with insufficient memory may cause out of
#          memory errors. The domain needs enough memory to boot kernel
#          and modules. Allocating less than 32MBs is not recommended.
memory = 512

# Shadow pagetable memory for the domain, in MB.
# If not explicictly set, xend will pick an appropriate value.  
# Should be at least 2KB per MB of domain memory, plus a few MB per vcpu.
# shadow_memory = 8

# A name for your domain. All domains must have different names.
name = "vsrvMODELO"

# 128-bit UUID for the domain.  The default behavior is to generate a new UUID
# on each call to 'xm create'.
#uuid = "06ed00fe-1162-4fc4-b5d8-11993ee4a8b9"

#-----------------------------------------------------------------------------
# The number of cpus guest platform has, default=1
vcpus=1

# Enable/disable HVM guest PAE, default=1 (enabled)
#pae=1

# Enable/disable HVM guest ACPI, default=1 (enabled)
#acpi=1

# Enable/disable HVM APIC mode, default=1 (enabled)
# Note that this option is ignored if vcpus > 1
#apic=1

# List of which CPUS this domain is allowed to use, default Xen picks
#cpus = ""         # leave to Xen to pick
#cpus = "0"        # all vcpus run on CPU0
#cpus = "0-3,5,^1" # all vcpus run on cpus 0,2,3,5
#cpus = ["2", "3"] # VCPU0 runs on CPU2, VCPU1 runs on CPU3
cpus = "0"

# Optionally define mac and/or bridge for the network interfaces.
# Random MACs are assigned if not given.
#vif = [ 'type=ioemu, mac=00:16:3e:00:00:11, bridge=xenbr0, model=ne2k_pci' ]
# type=ioemu specify the NIC is an ioemu device not netfront
#vif = [ 'type=ioemu, bridge=xenbr0' ]
#vif = [ 'bridge=xenbr0, mac=00:01:64:64:3d:5c' ]

#----------------------------------------------------------------------------
# Define the disk devices you want the domain to have access to, and
# what you want them accessible as.
# Each disk entry is of the form phy:UNAME,DEV,MODE
# where UNAME is the device, DEV is the device name the domain will see,
# and MODE is r for read-only, w for read-write.
#
# STUBDOM: do not put it here but in stubdom-ExampleHVMDomain

#disk = [ 'phy:hda1,hda1,r' ]
#disk = [ 'file:/var/images/min-el3-i386.img,hda,w', ',hdc:cdrom,r' ]

#----------------------------------------------------------------------------
# Configure the behaviour when a domain exits.  There are three 'reasons'
# for a domain to stop: poweroff, reboot, and crash.  For each of these you
# may specify:
#
#   "destroy",        meaning that the domain is cleaned up as normal;
#   "restart",        meaning that a new domain is started in place of the old
#                     one;
#   "preserve",       meaning that no clean-up is done until the domain is
#                     manually destroyed (using xm destroy, for example); or
#   "rename-restart", meaning that the old domain is not cleaned up, but is
#                     renamed and a new domain started in its place.
#
# In the event a domain stops due to a crash, you have the additional options:
#
#   "coredump-destroy", meaning dump the crashed domain's core and then destroy;
#   "coredump-restart', meaning dump the crashed domain's core and the restart.
#
# The default is
#
#   on_poweroff = 'destroy'
#   on_reboot   = 'restart'
#   on_crash    = 'restart'
#
# For backwards compatibility we also support the deprecated option restart
#
# restart = 'onreboot' means on_poweroff = 'destroy'
#                            on_reboot   = 'restart'
#                            on_crash    = 'destroy'
#
# restart = 'always'   means on_poweroff = 'restart'
#                            on_reboot   = 'restart'
#                            on_crash    = 'restart'
#
# restart = 'never'    means on_poweroff = 'destroy'
#                            on_reboot   = 'destroy'
#                            on_crash    = 'destroy'

#on_poweroff = 'destroy'
#on_reboot   = 'restart'
#on_crash    = 'restart'

#============================================================================

# Device Model to be used
#
# STUBDOM: this is a script that creates the stub domain running the device
# model
device_model = '/usr/lib/xen/bin/stubdom-dm'

#-----------------------------------------------------------------------------
# boot on floppy (a), hard disk (c), Network (n) or CD-ROM (d) 
# default: hard disk, cd-rom, floppy
boot="d"

#-----------------------------------------------------------------------------
#  write to temporary files instead of disk image files
#snapshot=1

#----------------------------------------------------------------------------
# enable SDL library for graphics, default = 0
# 
# STUBDOM: always disable since the stub domain doesn't have direct X access
sdl=0

#----------------------------------------------------------------------------
# enable OpenGL for texture rendering inside the SDL window, default = 1
# valid only if sdl is enabled.
# 
# STUBDOM: always disable for the same reason
opengl=0

#----------------------------------------------------------------------------
# enable VNC library for graphics, default = 1
vnc=0

#----------------------------------------------------------------------------
# address that should be listened on for the VNC server if vnc is set.
# default is to use 'vnc-listen' setting from /etc/xen/xend-config.sxp
#vnclisten="10.1.10.213"

#----------------------------------------------------------------------------
# set VNC display number, default = domid
#vncdisplay=1

#----------------------------------------------------------------------------
# try to find an unused port for the VNC server, default = 1
#vncunused=1

#----------------------------------------------------------------------------
# enable spawning vncviewer for domain's console
# (only valid when vnc=1), default = 0
#vncconsole=0

#----------------------------------------------------------------------------
# set password for domain's VNC console
# default is depents on vncpasswd in xend-config.sxp
#vncpasswd=''

#----------------------------------------------------------------------------
# no graphics, use serial port
#nographic=0

#----------------------------------------------------------------------------
# enable stdvga, default = 0 (use cirrus logic device model)
stdvga=0

#-----------------------------------------------------------------------------
#   serial port re-direct to pty deivce, /dev/pts/n 
#   then xm console or minicom can connect
# 
# STUBDOM: always disable as the stub domain doesn't have access to dom0's
# ptys
#serial='pty'


#-----------------------------------------------------------------------------
#   Qemu Monitor, default is disable
#   Use ctrl-alt-2 to connect
#monitor=1


#-----------------------------------------------------------------------------
#   enable sound card support, [sb16|es1370|all|..,..], default none
# 
# STUBDOM: not supported
#soundhw='sb16'


#-----------------------------------------------------------------------------
#    set the real time clock to local time [default=0 i.e. set to utc]
#localtime=1


#-----------------------------------------------------------------------------
#    set the real time clock offset in seconds [default=0 i.e. same as dom0]
#rtc_timeoffset=3600

#-----------------------------------------------------------------------------
#    start in full screen
#full-screen=1   


#-----------------------------------------------------------------------------
#   Enable USB support (specific devices specified at runtime through the
#			monitor window)
#usb=1

#   Enable USB mouse support (only enable one of the following, `mouse' for
#			      PS/2 protocol relative mouse, `tablet' for
#			      absolute mouse)
#usbdevice='mouse'
#usbdevice='tablet'

#-----------------------------------------------------------------------------
#   Set keyboard layout, default is en-us keyboard. 
#keymap='ja'

#-----------------------------------------------------------------------------
#   Configure guest CPUID responses:
#
#cpuid=[ '1:ecx=xxxxxxxxxxx00xxxxxxxxxxxxxxxxxxx,
#           eax=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx' ]
# - Unset the SSE4 features (CPUID.1[ECX][20-19])
# - Default behaviour for all other bits in ECX And EAX registers.
# 
# Each successive character represent a lesser-significant bit:
#  '1' -> force the corresponding bit to 1
#  '0' -> force to 0
#  'x' -> Get a safe value (pass through and mask with the default policy)
#  'k' -> pass through the host bit value
#  's' -> as 'k' but preserve across save/restore and migration
# 
#   Expose to the guest multi-core cpu instead of multiple processors
# Example for intel, expose a 8-core processor :
#cpuid=['1:edx=xxx1xxxxxxxxxxxxxxxxxxxxxxxxxxxx,
#          ebx=xxxxxxxx00010000xxxxxxxxxxxxxxxx',
#     '4,0:eax=001111xxxxxxxxxxxxxxxxxxxxxxxxxx']
#  - CPUID.1[EDX][HT] : Enable HT
#  - CPUID.1[EBX] : Number of vcpus * 2
#  - CPUID.4,0[EAX] : Number of vcpus * 2 - 1
#vcpus=8
#
# Example for amd, expose a 5-core processor :
# cpuid = ['1:ebx=xxxxxxxx00001010xxxxxxxxxxxxxxxx,
#             edx=xxx1xxxxxxxxxxxxxxxxxxxxxxxxxxxx',
# '0x80000001:ecx=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx1x',
# '0x80000008:ecx=xxxxxxxxxxxxxxxxxxxxxxxxxx001001']
#   - CPUID.1[EBX] : Threads per Core * Cores per Socket (2 * #vcpus)
#   - CPUID.1[EDX][HT] : Enable HT
#   - CPUID.0x80000001[CmpLegacy] : Use legacy method
#   - CPUID.0x80000008[ECX] : #vcpus * 2 - 1
#vcpus=5
#
#  Downgrade the cpuid to make a better compatibility for migration :
# Look like a generic 686 :
# cpuid = [ '0:eax=0x3,ebx=0x0,ecx=0x0,edx=0x0',
#           '1:eax=0x06b1,
#              ecx=xxxxxxxxxx0000xx00xxx0000000xx0,
#              edx=xx00000xxxxxxx0xxxxxxxxx0xxxxxx',
#           '4:eax=0x3,ebx=0x0,ecx=0x0,edx=0x0',
#  '0x80000000:eax=0x3,ebx=0x0,ecx=0x0,edx=0x0']
#  with the highest leaf
#  - CPUID.0[EAX] : Set the highest leaf
#  - CPUID.1[EAX] : 686 
#  - CPUID.1[ECX] : Mask some features
#  - CPUID.1[EDX] : Mask some features
#  - CPUID.4 : Reply like the highest leaf, in our case CPUID.3
#  - CPUID.0x80000000 : No extension we are on a Pentium III, reply like the
#  highest leaf (CPUID.3).
#
#   Configure host CPUID consistency checks, which must be satisfied for this
#   VM to be allowed to run on this host's processor type:
#cpuid_check=[ '1:ecx=xxxxxxxxxxxxxxxxxxxxxxxxxx1xxxxx' ]
# - Host must have VMX feature flag set
#
# The format is similar to the above for 'cpuid':
#  '1' -> the bit must be '1'
#  '0' -> the bit must be '0'
#  'x' -> we don't care (do not check)
#  's' -> the bit must be the same as on the host that started this VM


#-----------------------------------------------------------------------------
#   Configure PVSCSI devices:
#
#vscsi=[ 'PDEV, VDEV' ]
#
#   PDEV   gives physical SCSI device to be attached to specified guest
#          domain by one of the following identifier format.
#          - XX:XX:XX:XX (4-tuples with decimal notation which shows
#                          "host:channel:target:lun")
#          - /dev/sdxx or sdx
#          - /dev/stxx or stx
#          - /dev/sgxx or sgx
#          - result of 'scsi_id -gu -s'.
#            ex. # scsi_id -gu -s /block/sdb
#                  36000b5d0006a0000006a0257004c0000
#
#   VDEV   gives virtual SCSI device by 4-tuples (XX:XX:XX:XX) as 
#          which the specified guest domain recognize.
#

#vscsi = [ '/dev/sdx, 0:0:0:0' ]

[-- Attachment #4: Type: text/plain, Size: 137 bytes --]

_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users