From: Adrian Hunter <adrian.hunter@intel.com>
To: Vadym Kochan <vadym.kochan@plvision.eu>,
Adrian Hunter <adrian.hunter@intel.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>,
Hu Ziji <huziji@marvell.com>,
Ulf Hansson <ulf.hansson@linaro.org>,
linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org,
Elad Nachman <enachman@marvell.com>
Subject: Re: [PATCH] mmc: sdhci-xenon: Fix 2G limitation on AC5 SoC
Date: Mon, 8 Aug 2022 14:40:07 +0300 [thread overview]
Message-ID: <6c94411c-4847-526c-d929-c9523aa65c11@intel.com> (raw)
In-Reply-To: <20220808095237.GA15939@plvision.eu>
On 8/08/22 12:52, Vadym Kochan wrote:
> Hi Adrian,
>
> On Mon, Aug 08, 2022 at 12:19:10PM +0300, Adrian Hunter wrote:
>> On 1/08/22 12:30, Vadym Kochan wrote:
>>> Hi Florian,
>>>
>>> On Wed, Jul 27, 2022 at 07:45:32PM +0300, Vadym Kochan wrote:
>>>> Hi Florian,
>>>>
>>>> On Tue, Jul 26, 2022 at 10:37:46AM -0700, Florian Fainelli wrote:
>>>>> On 7/26/22 10:07, Vadym Kochan wrote:
>>>>>> From: Elad Nachman <enachman@marvell.com>
>>>>>>
>>>>>> There is a limitation on AC5 SoC that mmc controller
>>>>>> can't have DMA access over 2G memory.
>>>>>>
>>>>>> Signed-off-by: Elad Nachman <enachman@marvell.com>
>>>>>> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
>>>>>> ---
>>>>>> drivers/mmc/host/sdhci-xenon.c | 13 +++++++++++++
>>>>>> 1 file changed, 13 insertions(+)
>>>>>>
>>>>>> diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
>>>>>> index 08e838400b52..666d06b58564 100644
>>>>>> --- a/drivers/mmc/host/sdhci-xenon.c
>>>>>> +++ b/drivers/mmc/host/sdhci-xenon.c
>>>>>> @@ -18,6 +18,7 @@
>>>>>> #include <linux/of.h>
>>>>>> #include <linux/pm.h>
>>>>>> #include <linux/pm_runtime.h>
>>>>>> +#include <linux/mm.h>
>>>>>>
>>>>>> #include "sdhci-pltfm.h"
>>>>>> #include "sdhci-xenon.h"
>>>>>> @@ -422,6 +423,8 @@ static int xenon_probe_params(struct platform_device *pdev)
>>>>>> struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
>>>>>> u32 sdhc_id, nr_sdhc;
>>>>>> u32 tuning_count;
>>>>>> + struct device_node *np = pdev->dev.of_node;
>>>>>> + struct sysinfo si;
>>>>>>
>>>>>> /* Disable HS200 on Armada AP806 */
>>>>>> if (priv->hw_version == XENON_AP806)
>>>>>> @@ -450,6 +453,15 @@ static int xenon_probe_params(struct platform_device *pdev)
>>>>>> }
>>>>>> priv->tuning_count = tuning_count;
>>>>>>
>>>>>> + si_meminfo(&si);
>>>>>> +
>>>>>> + if (of_device_is_compatible(np, "marvell,ac5-sdhci") &&
>>>>>> + ((si.totalram * si.mem_unit) > 0x80000000 /*2G*/)) {
>>>>>
>>>>> Why not limit the DMA mask of the device and ensure, that bounce buffers get used so you can still do DMA?
>>>>>
>>>>> Also, you ought to be able to describe that limitation using Device Tree (assuming this is an option) and declaring a dedicated bus node for the SDHCI controller and providing a suitable dma-ranges property, see: arch/arm/boot/dts/bcm2711.dtsi and the 'soc' node for such examples.
>>>>>
>>>>>
>>>>
>>>
>>> I could use DMA only in 2 ways:
>>>
>>> #1 Use sdhci bounce buffer with SDMA mode
>>>
>>> But there was the issue that SDMA requires that SDHCI v4 mode should
>>> be enabled, and when I enable it via sdhci_enable_v4_mode(host)
>>> then I got error that EXT_CSD can't be recognized.
>>>
>>> But if I comment this line in sdhci.c:
>>>
>>> int sdhci_setup_host(struct sdhci_host *host)
>>> {
>>> ...
>>>
>>> /* SDMA does not support 64-bit DMA if v4 mode not set */
>>> if ((host->flags & SDHCI_USE_64_BIT_DMA) && !host->v4_mode) {
>>> pr_info("XXX SDMA does not support 64-bit DMA if v4 mode not set\n");
>>> host->flags &= ~SDHCI_USE_SDMA;
>>> }
>>>
>>> ...
>>> }
>>>
>>> then everything is OK.
>>>
>>> #2 Use restricted-dma-pool in device-tree
>>>
>>> But I am not sure if it is good solution compared to #1.
>>>
>>> Setting only DMA mask did not help because after some time I got
>>> "DMA overflow address" error stack-traces.
>>
>> AFAICT using a DMA mask is the correct way to solve this. If that
>> reveals another issue then that must be resolved also. Can you show
>> the stack traces and what kernel they are from?
>>
>
> The Linux version is next-20220808
>
> Here is a stacktrace:
>
> [ 40.537028] ------------[ cut here ]------------
> [ 40.541698] xenon-sdhci 805c0000.sdhci: DMA addr
> 0x00000002ff700000+40960 overflow (mask 27fffffff, bus limit 0).
> [ 40.551968] WARNING: CPU: 0 PID: 7 at kernel/dma/direct.h:103
> dma_direct_map_sg+0x28c/0x2b0
Do you have CONFIG_SWIOTLB=y?
Is DMA mask correct? 2G mask would be 7fffffff not 27fffffff right?
> [ 40.560321] Modules linked in: uio_pdrv_genirq
> [ 40.564766] CPU: 0 PID: 7 Comm: kworker/0:0H Not tainted
> 5.19.0-next-20220808 #20
> [ 40.572236] Hardware name: Marvell A0-AC5X Board (DT)
> [ 40.577278] Workqueue: kblockd blk_mq_run_work_fn
> [ 40.581980] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS
> BTYPE=--)
> [ 40.588929] pc : dma_direct_map_sg+0x28c/0x2b0
> [ 40.593366] lr : dma_direct_map_sg+0x28c/0x2b0
> [ 40.597801] sp : ffff80000a6eba20
> [ 40.601107] x29: ffff80000a6eba20 x28: ffff000006d66080 x27:
> 0000000000000004
> [ 40.608233] x26: 0000000000000000 x25: ffff0000004de810 x24:
> 0000000000000000
> [ 40.615358] x23: 0000000000000002 x22: fffffc0000000000 x21:
> ffff800009153360
> [ 40.622484] x20: 0000000000000005 x19: 00000002ff700000 x18:
> ffffffffffffffff
> [ 40.629609] x17: 766f203036393034 x16: 2b30303030303766 x15:
> 6632303030303030
> [ 40.636735] x14: 3078302072646461 x13: ffff80000a433d58 x12:
> 00000000000002dc
> [ 40.643860] x11: 00000000000000f4 x10: ffff80000a48bd58 x9 :
> ffff80000a48bd58
> [ 40.650985] x8 : ffff80000a433d58 x7 : ffff80000a48bd58 x6 :
> 0000000000000000
> [ 40.658110] x5 : 000000000000bff4 x4 : 0000000000000000 x3 :
> 0000000000000000
> [ 40.665234] x2 : 0000000000000000 x1 : 0000000000000000 x0 :
> ffff0000004add00
> [ 40.672360] Call trace:
> [ 40.674800] dma_direct_map_sg+0x28c/0x2b0
> [ 40.678890] __dma_map_sg_attrs+0x28/0xa0
> [ 40.682895] dma_map_sg_attrs+0x10/0x30
> [ 40.686725] sdhci_pre_dma_transfer+0xcc/0x150
> [ 40.691165] sdhci_pre_req+0x3c/0x50
> [ 40.694734] mmc_blk_mq_issue_rq+0x25c/0x9d0
> [ 40.698997] mmc_mq_queue_rq+0x118/0x2b0
> [ 40.702912] blk_mq_dispatch_rq_list+0x19c/0x800
> [ 40.707521] blk_mq_do_dispatch_sched+0x2bc/0x350
> [ 40.712218] __blk_mq_sched_dispatch_requests+0x10c/0x160
> [ 40.717608] blk_mq_sched_dispatch_requests+0x40/0x80
> [ 40.722651] __blk_mq_run_hw_queue+0x80/0xc0
> [ 40.726911] blk_mq_run_work_fn+0x24/0x30
> [ 40.730913] process_one_work+0x1d0/0x320
> [ 40.734919] worker_thread+0x14c/0x450
> [ 40.738662] kthread+0x10c/0x110
> [ 40.741885] ret_from_fork+0x10/0x20
> [ 40.745457] ---[ end trace 0000000000000000 ]---
> [ 40.750160] ------------[ cut here ]------------
> [ 40.754770] WARNING: CPU: 0 PID: 7 at drivers/mmc/host/sdhci.c:1152
> sdhci_send_command+0x7fc/0xea0
> [ 40.763719] Modules linked in: uio_pdrv_genirq
> [ 40.768149] CPU: 0 PID: 7 Comm: kworker/0:0H Tainted: G W
> 5.19.0-next-20220808 #20
> [ 40.777090] Hardware name: Marvell A0-AC5X Board (DT)
> [ 40.782129] Workqueue: kblockd blk_mq_run_work_fn
> [ 40.786827] pstate: a04000c9 (NzCv daIF +PAN -UAO -TCO -DIT -SSBS
> BTYPE=--)
> [ 40.793775] pc : sdhci_send_command+0x7fc/0xea0
> [ 40.798297] lr : sdhci_send_command+0x644/0xea0
> [ 40.802821] sp : ffff80000a6eb980
> [ 40.806127] x29: ffff80000a6eb980 x28: ffff80000a6ebcf8 x27:
> 0000000000000002
> [ 40.813253] x26: 0000000000000000 x25: 0000000000000000 x24:
> ffff0000004237c0
> [ 40.820378] x23: 000000000000000b x22: ffff000006d825b8 x21:
> ffff000006d82628
> [ 40.827502] x20: ffff000006d825b8 x19: ffff000000423580 x18:
> ffffffffffffffff
> [ 40.834627] x17: 766f203036393034 x16: 2b30303030303766 x15:
> 6632303030303030
> [ 40.841751] x14: 3078302072646461 x13: ffff80000a433d58 x12:
> 00000000000002dc
> [ 40.848876] x11: 00000000000000f4 x10: ffff80000a48bd58 x9 :
> ffff80000a48bd58
> [ 40.856001] x8 : ffff80000a433d58 x7 : 0000000000000000 x6 :
> ffff0000004deaf8
> [ 40.863125] x5 : 0000000000000000 x4 : 0000000000000020 x3 :
> 0000000000000000
> [ 40.870250] x2 : 0000000000020401 x1 : 0000000000000001 x0 :
> 00000000ffffffe4
> [ 40.877374] Call trace:
> [ 40.879813] sdhci_send_command+0x7fc/0xea0
> [ 40.883989] sdhci_send_command_retry+0x40/0x140
> [ 40.888597] sdhci_request+0x70/0xd0
> [ 40.892167] __mmc_start_request+0x68/0x140
> [ 40.896345] mmc_start_request+0x78/0xa0
> [ 40.900260] mmc_blk_mq_issue_rq+0x284/0x9d0
> [ 40.904521] mmc_mq_queue_rq+0x118/0x2b0
> [ 40.908436] blk_mq_dispatch_rq_list+0x19c/0x800
> [ 40.913045] blk_mq_do_dispatch_sched+0x2bc/0x350
> [ 40.917741] __blk_mq_sched_dispatch_requests+0x10c/0x160
> [ 40.923131] blk_mq_sched_dispatch_requests+0x40/0x80
> [ 40.928173] __blk_mq_run_hw_queue+0x80/0xc0
> [ 40.932435] blk_mq_run_work_fn+0x24/0x30
> [ 40.936437] process_one_work+0x1d0/0x320
> [ 40.940442] worker_thread+0x14c/0x450
> [ 40.944184] kthread+0x10c/0x110
> [ 40.947407] ret_from_fork+0x10/0x20
> [ 40.950977] ---[ end trace 0000000000000000 ]---
> [ 40.960738] ------------[ cut here ]------------
> [ 40.965361] WARNING: CPU: 1 PID: 49 at drivers/mmc/host/sdhci.c:1152
> sdhci_send_command+0x7fc/0xea0
> [ 40.974403] Modules linked in: uio_pdrv_genirq
> [ 40.978843] CPU: 1 PID: 49 Comm: kworker/1:1H Tainted: G W
> 5.19.0-next-20220808 #20
> [ 40.987873] Hardware name: Marvell A0-AC5X Board (DT)
> [ 40.992913] Workqueue: kblockd blk_mq_run_work_fn
> [ 40.997613] pstate: a04000c9 (NzCv daIF +PAN -UAO -TCO -DIT -SSBS
> BTYPE=--)
> [ 41.004562] pc : sdhci_send_command+0x7fc/0xea0
> [ 41.009086] lr : sdhci_send_command+0x644/0xea0
> [ 41.013610] sp : ffff80000a9db980
> [ 41.016915] x29: ffff80000a9db980 x28: ffff80000a9dbcf8 x27:
> 0000000000000002
> [ 41.024041] x26: 0000000000000000 x25: 0000000000000000 x24:
> ffff0000004237c0
> [ 41.031166] x23: 000000000000000b x22: ffff000006d05eb8 x21:
> ffff000006d05f28
> [ 41.038291] x20: ffff000006d05eb8 x19: ffff000000423580 x18:
> fffffc0003fde640
> [ 41.045416] x17: 0000000000000000 x16: 0000000000000000 x15:
> 0000000000000000
> [ 41.052540] x14: 0000000000000002 x13: 0000000000100000 x12:
> 0000000000000000
> [ 41.059664] x11: 0000000000000000 x10: 0000000000000b10 x9 :
> ffff80000a9db9e0
> [ 41.066789] x8 : ffff000000649af0 x7 : 0000000000000000 x6 :
> ffff0000004deaf8
> [ 41.073914] x5 : 0000000000000000 x4 : 0000000000000020 x3 :
> 0000000000000000
> [ 41.081039] x2 : 0000000000020401 x1 : 0000000000000001 x0 :
> 00000000ffffffe4
> [ 41.088164] Call trace:
> [ 41.090603] sdhci_send_command+0x7fc/0xea0
> [ 41.094779] sdhci_send_command_retry+0x40/0x140
> [ 41.099379] sdhci_request+0x70/0xd0
> [ 41.102949] __mmc_start_request+0x68/0x140
> [ 41.107127] mmc_start_request+0x78/0xa0
> [ 41.111042] mmc_blk_mq_issue_rq+0x284/0x9d0
> [ 41.115305] mmc_mq_queue_rq+0x118/0x2b0
> [ 41.119221] blk_mq_dispatch_rq_list+0x19c/0x800
> [ 41.123831] blk_mq_do_dispatch_sched+0x2bc/0x350
> [ 41.128528] __blk_mq_sched_dispatch_requests+0x10c/0x160
> [ 41.133917] blk_mq_sched_dispatch_requests+0x40/0x80
> [ 41.138959] __blk_mq_run_hw_queue+0x80/0xc0
> [ 41.143222] blk_mq_run_work_fn+0x24/0x30
> [ 41.147223] process_one_work+0x1d0/0x320
> [ 41.151230] worker_thread+0x14c/0x450
> [ 41.154973] kthread+0x10c/0x110
> [ 41.158195] ret_from_fork+0x10/0x20
> [ 41.161766] ---[ end trace 0000000000000000 ]---
> [ 41.171543] ------------[ cut here ]------------
> [ 41.176169] WARNING: CPU: 1 PID: 49 at drivers/mmc/host/sdhci.c:1152
> sdhci_send_command+0x7fc/0xea0
> [ 41.185210] Modules linked in: uio_pdrv_genirq
> [ 41.189650] CPU: 1 PID: 49 Comm: kworker/1:1H Tainted: G W
> 5.19.0-next-20220808 #20
> [ 41.198679] Hardware name: Marvell A0-AC5X Board (DT)
> [ 41.203720] Workqueue: kblockd blk_mq_run_work_fn
> [ 41.208420] pstate: a04000c9 (NzCv daIF +PAN -UAO -TCO -DIT -SSBS
> BTYPE=--)
> [ 41.215369] pc : sdhci_send_command+0x7fc/0xea0
> [ 41.219892] lr : sdhci_send_command+0x644/0xea0
> [ 41.224414] sp : ffff80000a9db980
> [ 41.227721] x29: ffff80000a9db980 x28: ffff80000a9dbcf8 x27:
> 0000000000000002
> [ 41.234846] x26: 0000000000000000 x25: 0000000000000000 x24:
> ffff0000004237c0
> [ 41.241972] x23: 000000000000000b x22: ffff000006d001b8 x21:
> ffff000006d00228
> [ 41.249097] x20: ffff000006d001b8 x19: ffff000000423580 x18:
> 0000000000000000
> [ 41.256223] x17: 0000000000000000 x16: 0000000000000000 x15:
> 0000000000000000
> [ 41.263348] x14: 0000000000000002 x13: 0000000000100000 x12:
> 0000000000000000
> [ 41.270473] x11: 0000000000000001 x10: 0000000000000b10 x9 :
> ffff80000a9db9e0
> [ 41.277598] x8 : ffff000000649af0 x7 : 0000000000000000 x6 :
> ffff0000004deaf8
> [ 41.284722] x5 : 0000000000000000 x4 : 0000000000000020 x3 :
> 0000000000000000
> [ 41.291846] x2 : 0000000000020401 x1 : 0000000000000001 x0 :
> 00000000ffffffe4
> [ 41.298971] Call trace:
> [ 41.301410] sdhci_send_command+0x7fc/0xea0
> [ 41.305588] sdhci_send_command_retry+0x40/0x140
> [ 41.310198] sdhci_request+0x70/0xd0
> [ 41.313769] __mmc_start_request+0x68/0x140
> [ 41.317946] mmc_start_request+0x78/0xa0
> [ 41.321862] mmc_blk_mq_issue_rq+0x284/0x9d0
> [ 41.326125] mmc_mq_queue_rq+0x118/0x2b0
> [ 41.330040] blk_mq_dispatch_rq_list+0x19c/0x800
> [ 41.334649] blk_mq_do_dispatch_sched+0x2bc/0x350
> [ 41.339346] __blk_mq_sched_dispatch_requests+0x10c/0x160
> [ 41.344735] blk_mq_sched_dispatch_requests+0x40/0x80
> [ 41.349779] __blk_mq_run_hw_queue+0x80/0xc0
> [ 41.354040] blk_mq_run_work_fn+0x24/0x30
> [ 41.358041] process_one_work+0x1d0/0x320
> [ 41.362048] worker_thread+0x14c/0x450
> [ 41.365791] kthread+0x10c/0x110
> [ 41.369014] ret_from_fork+0x10/0x20
> [ 41.372584] ---[ end trace 0000000000000000 ]---
> [ 41.382383] ------------[ cut here ]------------
> [ 41.387009] WARNING: CPU: 1 PID: 49 at drivers/mmc/host/sdhci.c:1152
> sdhci_send_command+0x7fc/0xea0
> [ 41.396051] Modules linked in: uio_pdrv_genirq
> [ 41.400491] CPU: 1 PID: 49 Comm: kworker/1:1H Tainted: G W
> 5.19.0-next-20220808 #20
> [ 41.409520] Hardware name: Marvell A0-AC5X Board (DT)
> [ 41.414561] Workqueue: kblockd blk_mq_run_work_fn
> [ 41.419261] pstate: a04000c9 (NzCv daIF +PAN -UAO -TCO -DIT -SSBS
> BTYPE=--)
> [ 41.426210] pc : sdhci_send_command+0x7fc/0xea0
> [ 41.430734] lr : sdhci_send_command+0x644/0xea0
> [ 41.435256] sp : ffff80000a9db980
> [ 41.438562] x29: ffff80000a9db980 x28: ffff80000a9dbcf8 x27:
> 0000000000000002
> [ 41.445687] x26: 0000000000000000 x25: 0000000000000000 x24:
> ffff0000004237c0
> [ 41.452812] x23: 000000000000000b x22: ffff000006d004b8 x21:
> ffff000006d00528
> [ 41.459937] x20: ffff000006d004b8 x19: ffff000000423580 x18:
> 0000000000000000
> [ 41.467062] x17: 0000000000000000 x16: 0000000000000000 x15:
> 0000000000000000
> [ 41.474187] x14: 0000000000000002 x13: 00000000000ff000 x12:
> 0000000000000000
> [ 41.481311] x11: 0000000000000001 x10: 0000000000000b10 x9 :
> ffff80000a9db9e0
> [ 41.488436] x8 : ffff000000649af0 x7 : 0000000000000000 x6 :
> ffff0000004deaf8
> [ 41.495561] x5 : 0000000000000000 x4 : 0000000000000020 x3 :
> 0000000000000000
> [ 41.502685] x2 : 0000000000020401 x1 : 0000000000000001 x0 :
> 00000000ffffffe4
> [ 41.509811] Call trace:
> [ 41.512250] sdhci_send_command+0x7fc/0xea0
> [ 41.516427] sdhci_send_command_retry+0x40/0x140
> [ 41.521035] sdhci_request+0x70/0xd0
> [ 41.524607] __mmc_start_request+0x68/0x140
> [ 41.528784] mmc_start_request+0x78/0xa0
> [ 41.532699] mmc_blk_mq_issue_rq+0x284/0x9d0
> [ 41.536961] mmc_mq_queue_rq+0x118/0x2b0
> [ 41.540876] blk_mq_dispatch_rq_list+0x19c/0x800
> [ 41.545485] blk_mq_do_dispatch_sched+0x2bc/0x350
> [ 41.550182] __blk_mq_sched_dispatch_requests+0x10c/0x160
> [ 41.555570] blk_mq_sched_dispatch_requests+0x40/0x80
> [ 41.560613] __blk_mq_run_hw_queue+0x80/0xc0
> [ 41.564874] blk_mq_run_work_fn+0x24/0x30
> [ 41.568875] process_one_work+0x1d0/0x320
> [ 41.572881] worker_thread+0x14c/0x450
> [ 41.576624] kthread+0x10c/0x110
> [ 41.579847] ret_from_fork+0x10/0x20
> [ 41.583428] ---[ end trace 0000000000000000 ]---
>
>
>>>
>>>> Do I understand correctly that the swiotlb will be used in case DMA
>>>> engine could not map the page in the specified range (limited by dma-ranges or
>>>> dma-mask) ?
>>>>
>>>>>
>>>>>> + host->quirks |= SDHCI_QUIRK_BROKEN_DMA;
>>>>>> + host->quirks |= SDHCI_QUIRK_BROKEN_ADMA;
>>>>>> + dev_info(mmc_dev(mmc), "Disabling DMA because of 2GB DMA access limit.\n");
>>>>>> + }
>>>>>> +
>>>>>> return xenon_phy_parse_params(dev, host);
>>>>>> }
>>>>>>
>>>>>> @@ -682,6 +694,7 @@ static const struct of_device_id sdhci_xenon_dt_ids[] = {
>>>>>> { .compatible = "marvell,armada-ap807-sdhci", .data = (void *)XENON_AP807},
>>>>>> { .compatible = "marvell,armada-cp110-sdhci", .data = (void *)XENON_CP110},
>>>>>> { .compatible = "marvell,armada-3700-sdhci", .data = (void *)XENON_A3700},
>>>>>> + { .compatible = "marvell,ac5-sdhci", .data = (void *)XENON_AP806},
>>>>>> {}
>>>>>> };
>>>>>> MODULE_DEVICE_TABLE(of, sdhci_xenon_dt_ids);
>>>>>
>>>>>
>>>>> --
>>>>> Florian
>>>>
>>>> Thanks,
>>>>
>>>
>>> Regards,
>>
>
> Thanks,
> Vadym Kochan
next prev parent reply other threads:[~2022-08-08 11:40 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-26 17:07 [PATCH] mmc: sdhci-xenon: Fix 2G limitation on AC5 SoC Vadym Kochan
2022-07-26 17:37 ` Florian Fainelli
2022-07-27 16:45 ` Vadym Kochan
2022-08-01 9:30 ` Vadym Kochan
2022-08-08 9:19 ` Adrian Hunter
2022-08-08 9:52 ` Vadym Kochan
2022-08-08 10:29 ` Vadym Kochan
2022-08-08 11:40 ` Adrian Hunter [this message]
2022-08-08 12:26 ` Vadym Kochan
2022-08-08 12:58 ` Adrian Hunter
2022-08-08 14:06 ` Robin Murphy
2022-08-16 20:51 ` Vadym Kochan
2022-08-17 13:43 ` Robin Murphy
2022-08-17 16:07 ` Vadym Kochan
2022-08-17 17:23 ` Robin Murphy
2022-08-18 12:07 ` Vadym Kochan
2022-08-21 6:17 ` Christoph Hellwig
2022-08-22 10:06 ` Robin Murphy
2022-09-06 9:22 ` Vadym Kochan
2022-10-13 6:40 ` Vadym Kochan
2022-11-08 19:05 ` Vadym Kochan
2022-11-09 7:50 ` Adrian Hunter
2022-11-09 8:40 ` Vadym Kochan
2022-11-09 9:29 ` Adrian Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6c94411c-4847-526c-d929-c9523aa65c11@intel.com \
--to=adrian.hunter@intel.com \
--cc=enachman@marvell.com \
--cc=f.fainelli@gmail.com \
--cc=huziji@marvell.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=ulf.hansson@linaro.org \
--cc=vadym.kochan@plvision.eu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.