From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marek Vasut <marek.vasut@gmail.com>
Date: Mon, 29 Apr 2019 11:58:52 +0200
Subject: [U-Boot] [PATCH v1 12/18] usb: dwc3: Add dwc3_of_parse() to get
 quirks information from DT
In-Reply-To: <20190405125554.18070-13-jjhiblot@ti.com>
References: <20190405125554.18070-1-jjhiblot@ti.com>
 <20190405125554.18070-13-jjhiblot@ti.com>
Message-ID: <6d9cd4ec-224d-a258-c69e-fc9ea7a19422@gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 4/5/19 2:55 PM, Jean-Jacques Hiblot wrote:
> Add a new function that read quirk and configuration information from the
> DT. The goal is to allow platforms using their own version of DWC3 driver
> to migrate to the generic DWC3 driver.
> The function is adapted from the linux dwc3 driver.

>From which commit in Linux ?

> 
> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
> ---

[...]

> diff --git a/drivers/usb/dwc3/dwc3-generic.c b/drivers/usb/dwc3/dwc3-generic.c
> index 3d008496f3..158d726623 100644
> --- a/drivers/usb/dwc3/dwc3-generic.c
> +++ b/drivers/usb/dwc3/dwc3-generic.c
> @@ -48,8 +48,12 @@ static int dwc3_generic_probe(struct udevice *dev,
>  	struct dwc3_generic_plat *plat = dev_get_platdata(dev);
>  	struct dwc3 *dwc3 = &priv->dwc3;
>  
> +	dwc3->dev = dev;
>  	dwc3->maximum_speed = plat->maximum_speed;
>  	dwc3->dr_mode = plat->dr_mode;
> +#if CONFIG_IS_ENABLED(OF_CONTROL)
> +	dwc3_of_parse(dwc3);
> +#endif
>  
>  	rc = dwc3_setup_phy(dev, &priv->phys, &priv->num_phys);
>  	if (rc)
> @@ -57,7 +61,7 @@ static int dwc3_generic_probe(struct udevice *dev,
>  
>  	priv->base = map_physmem(plat->base, DWC3_OTG_REGS_END, MAP_NOCACHE);
>  	dwc3->regs = priv->base + DWC3_GLOBALS_REGS_START;
> -	dwc3->dev = dev;
> +
>  

Drop the extra newline

>  	rc =  dwc3_init(dwc3);
>  	if (rc) {
> 


-- 
Best regards,
Marek Vasut