On Tue, May 12, 2009 at 7:15 PM, Brian Marete wrote: > On Mon, May 11, 2009 at 11:46 AM, Marcel Holtmann wrote: >> Hi Brian, >> >>> >> At least until kernel version 2.6.24, I was able to use my USB >>> >> bluetooth dongle to download contacts from my phone. I made a jump >>> >> from 2.6.24 to 2.6.27, so I am not sure exactly which kernel version >>> >> starts the problem, but all kernels from the latter (2.6.27) now do >>> >> not work. The latest kernel I have tested is 2.6.29.2. >>> > >>> > can you test 2.6.30-rc4 or bluetooth-testing.git. I am pretty sure that >>> > whatever broke in 2.6.27 has been fixed by now. Some cheapo USB dongles >>> > behaved wrongly and it was a long time not clear what caused it. >>> >>> Alas, the regression is still there in 2.6.30-rc5 which I tested over >>> the weekend. >>> >>> I also forgot to mention that, even with the kernels with the >>> regression, device pairing using the dongle still works. >>> >>> Would a packet capture (usbmon) help? Willing to capture whatever >>> other debugging data that you think may help >> >> if device pairing works fine, the I guess this is a different problem. >> It could be that your USB host controller doesn't like the device. Or >> you forgot to load the EHCI driver or something. Otherwise your dongle >> should work fine. Since pairing works, what does hciconfig -a says? >> > > Hello, > > EHCI is actually loaded. See my regression report in my original email. > > Regarding some conflict with the host controller, well, it did work > fine in 2.6.24. > > Is there some other debug output I can collect or some other > information that I can provide to help identify the source of the > regression? > Hello, The regression persists even in the latest kernels. Decided to collect some more debug information on this problem. This output is from the same system detailed above running on kernel 2.6.28.10: Here is the output of hciconfig -a: hci0: Type: USB BD Address: BB:4A:BB:33:40:36 ACL MTU: 339:6 SCO MTU: 180:1 UP RUNNING PSCAN ISCAN RX bytes:14299 acl:0 sco:0 events:386 errors:0 TX bytes:2221 acl:0 sco:0 commands:231 errors:0 Features: 0xef 0x3e 0x09 0xf0 0x0b 0x08 0x00 0x80 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: SLAVE ACCEPT Name: 'oqb-0' Class: 0x08010c Service Classes: Capturing Device Class: Computer, Laptop HCI Ver: 1.2 (0x2) HCI Rev: 0x2 LMP Ver: 1.2 (0x2) LMP Subver: 0x2 Manufacturer: Accel Semiconductor Ltd. (74) ----------------------------------------------------------------------------- Here is the output and hcidump of l2ping: $ sudo l2ping 00:21:AB:9D:0C:C8 Can't connect: Device or resource busy HCI sniffer - Bluetooth packet analyzer ver 1.40 device: hci0 snap_len: 1028 filter: 0xffffffff < HCI Command: Create Connection (0x01|0x0005) plen 13 C8 0C 9D AB 21 00 18 CC 02 00 00 00 01 > HCI Event: Command Status (0x0f) plen 4 00 01 05 04 > HCI Event: Connect Complete (0x03) plen 11 00 00 00 C8 0C 9D AB 21 00 01 00 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 00 00 > HCI Event: Command Status (0x0f) plen 4 0C 01 1B 04 < HCI Command: Remote Name Request (0x01|0x0019) plen 10 C8 0C 9D AB 21 00 02 00 00 00 > HCI Event: Command Status (0x0f) plen 4 00 01 19 04 > HCI Event: Max Slots Change (0x1b) plen 3 00 00 05 < HCI Command: Disconnect (0x01|0x0006) plen 3 00 00 13 > HCI Event: Command Status (0x0f) plen 4 00 01 06 04 > HCI Event: Disconn Complete (0x05) plen 4 00 00 00 16 -------------------------------------------------------------------------------------- And here is the output followed by the hcidump of an attempt to connect with rfcomm: $ sudo rfcomm connect 0 Can't connect RFCOMM socket: Device or resource busy HCI sniffer - Bluetooth packet analyzer ver 1.40 device: hci0 snap_len: 1028 filter: 0xffffffff < HCI Command: Create Connection (0x01|0x0005) plen 13 C8 0C 9D AB 21 00 18 CC 02 00 00 00 01 > HCI Event: Command Status (0x0f) plen 4 00 01 05 04 > HCI Event: Connect Complete (0x03) plen 11 00 00 00 C8 0C 9D AB 21 00 01 00 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 00 00 > HCI Event: Command Status (0x0f) plen 4 0C 01 1B 04 < HCI Command: Remote Name Request (0x01|0x0019) plen 10 C8 0C 9D AB 21 00 02 00 00 00 > HCI Event: Command Status (0x0f) plen 4 00 01 19 04 > HCI Event: Max Slots Change (0x1b) plen 3 00 00 05 < HCI Command: Disconnect (0x01|0x0006) plen 3 00 00 13 > HCI Event: Command Status (0x0f) plen 4 00 01 06 04 > HCI Event: Disconn Complete (0x05) plen 4 00 00 00 16 ----------------------------------------------------------------------- Here is the output followed by a hcidump of using hcitool scan: ~$ sudo hcitool scan Scanning ... 00:21:AB:9D:0C:C8 Marete_ HCI sniffer - Bluetooth packet analyzer ver 1.40 device: hci0 snap_len: 1028 filter: 0xffffffff < HCI Command: Inquiry (0x01|0x0001) plen 5 33 8B 9E 08 00 > HCI Event: Command Status (0x0f) plen 4 00 01 01 04 > HCI Event: Inquiry Result with RSSI (0x22) plen 15 01 C8 0C 9D AB 21 00 01 02 04 02 5A 4C 35 00 > HCI Event: Inquiry Complete (0x01) plen 1 00 ---------------------------------------------------------------------- Here is the output and hcidump of running hcitool inq $ hcitool inq 00:21:AB:9D:0C:C8 Inquiring ... 00:21:AB:9D:0C:C8 clock offset: 0x354f class: 0x5a0204 HCI sniffer - Bluetooth packet analyzer ver 1.40 device: hci0 snap_len: 1028 filter: 0xffffffff < HCI Command: Inquiry (0x01|0x0001) plen 5 33 8B 9E 08 00 > HCI Event: Command Status (0x0f) plen 4 00 01 01 04 > HCI Event: Inquiry Result with RSSI (0x22) plen 15 01 C8 0C 9D AB 21 00 01 02 04 02 5A 4F 35 00 > HCI Event: Inquiry Complete (0x01) plen 1 00 ----------------------------------------------------------------------------- Here is the output and hcidump of running hcitool info Requesting information ... BD Address: 00:21:AB:9D:0C:C8 LMP Version: 2.0 (0x3) LMP Subversion: 0x6cc Manufacturer: Cambridge Silicon Radio (10) Features: 0xbf 0xee 0x0f 0xc6 0x9a 0x39 0x00 0x00 <3-slot packets> <5-slot packets> <3-slot EDR ACL> <5-slot EDR ACL> HCI sniffer - Bluetooth packet analyzer ver 1.40 device: hci0 snap_len: 1028 filter: 0xffffffff < HCI Command: Create Connection (0x01|0x0005) plen 13 C8 0C 9D AB 21 00 18 CC 02 00 00 00 01 > HCI Event: Command Status (0x0f) plen 4 00 01 05 04 > HCI Event: Connect Complete (0x03) plen 11 00 00 00 C8 0C 9D AB 21 00 01 00 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 00 00 > HCI Event: Command Status (0x0f) plen 4 0C 01 1B 04 < HCI Command: Remote Name Request (0x01|0x0019) plen 10 C8 0C 9D AB 21 00 02 00 00 00 > HCI Event: Command Status (0x0f) plen 4 00 01 19 04 < HCI Command: Remote Name Request (0x01|0x0019) plen 10 C8 0C 9D AB 21 00 02 00 00 00 > HCI Event: Command Status (0x0f) plen 4 0C 01 19 04 < HCI Command: Read Remote Version Information (0x01|0x001d) plen 2 00 00 > HCI Event: Command Status (0x0f) plen 4 00 01 1D 04 > HCI Event: Max Slots Change (0x1b) plen 3 00 00 05 < HCI Command: Disconnect (0x01|0x0006) plen 3 00 00 13 > HCI Event: Command Status (0x0f) plen 4 0C 01 06 04 > HCI Event: Remote Name Req Complete (0x07) plen 255 00 C8 0C 9D AB 21 00 4D 61 72 65 74 65 35 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > HCI Event: Read Remote Ver Info Complete (0x0c) plen 8 00 00 00 03 0A 00 CC 06 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 00 00 > HCI Event: Command Status (0x0f) plen 4 00 01 1B 04 > HCI Event: Read Remote Supported Features (0x0b) plen 11 00 00 00 BF EE 0F C6 9A 39 00 00 < HCI Command: Disconnect (0x01|0x0006) plen 3 00 00 13 > HCI Event: Command Status (0x0f) plen 4 00 01 06 04 > HCI Event: Disconn Complete (0x05) plen 4 00 00 00 16 ------------------------------------------------------------------------ Pairing from the __phone__ works, even in the kernels with the regression. Here is the hcidump of a pairing: HCI sniffer - Bluetooth packet analyzer ver 1.40 device: hci0 snap_len: 1028 filter: 0xffffffff > HCI Event: Connect Request (0x04) plen 10 C8 0C 9D AB 21 00 04 02 5A 01 < HCI Command: Accept Connection Request (0x01|0x0009) plen 7 C8 0C 9D AB 21 00 01 > HCI Event: Command Status (0x0f) plen 4 00 01 09 04 > HCI Event: PIN Code Request (0x16) plen 6 C8 0C 9D AB 21 00 < HCI Command: Read Local Name (0x03|0x0014) plen 0 > HCI Event: Command Complete (0x0e) plen 252 01 14 0C 00 6F 71 62 2D 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 < HCI Command: PIN Code Request Reply (0x01|0x000d) plen 23 C8 0C 9D AB 21 00 04 30 30 30 30 00 00 00 00 00 00 00 00 00 00 00 00 > HCI Event: Command Complete (0x0e) plen 10 01 0D 04 00 C8 0C 9D AB 21 00 > HCI Event: Link Key Notification (0x18) plen 23 C8 0C 9D AB 21 00 F9 27 CF D2 05 07 0E 16 36 99 2A 18 FB 12 13 1D 00 > HCI Event: Connect Complete (0x03) plen 11 00 00 00 C8 0C 9D AB 21 00 01 00 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 00 00 > HCI Event: Max Slots Change (0x1b) plen 3 00 00 05 > HCI Event: Command Status (0x0f) plen 4 00 01 1B 04 < HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4 00 00 18 CC > HCI Event: Command Status (0x0f) plen 4 00 01 0F 04 > HCI Event: Connection Packet Type Changed (0x1d) plen 5 00 00 00 00 80 > HCI Event: Read Remote Supported Features (0x0b) plen 11 00 00 00 BF EE 0F C6 9A 39 00 00 < HCI Command: Remote Name Request (0x01|0x0019) plen 10 C8 0C 9D AB 21 00 02 00 00 00 > HCI Event: Command Status (0x0f) plen 4 00 01 19 04 < HCI Command: Read Local Name (0x03|0x0014) plen 0 > HCI Event: Remote Name Req Complete (0x07) plen 255 00 C8 0C 9D AB 21 00 4D 61 72 65 74 65 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > HCI Event: Command Complete (0x0e) plen 252 01 14 0C 00 6F 71 62 2D 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > HCI Event: Disconn Complete (0x05) plen 4 00 00 00 13 ------------------------------------------------------------------------- Here is the hcidump of (failed) attempt to browse the phone using obex (By using the gnome bt applet) HCI sniffer - Bluetooth packet analyzer ver 1.40 device: hci0 snap_len: 1028 filter: 0xffffffff < HCI Command: Inquiry (0x01|0x0001) plen 5 33 8B 9E 08 00 > HCI Event: Command Status (0x0f) plen 4 00 01 01 04 > HCI Event: Inquiry Result with RSSI (0x22) plen 15 01 C8 0C 9D AB 21 00 01 02 04 02 5A 58 35 00 < HCI Command: Inquiry Cancel (0x01|0x0002) plen 0 > HCI Event: Command Complete (0x0e) plen 4 01 02 04 00 < HCI Command: Create Connection (0x01|0x0005) plen 13 C8 0C 9D AB 21 00 18 CC 01 00 58 B5 01 > HCI Event: Command Status (0x0f) plen 4 00 01 05 04 > HCI Event: Connect Complete (0x03) plen 11 00 00 00 C8 0C 9D AB 21 00 01 00 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 00 00 > HCI Event: Command Status (0x0f) plen 4 0C 01 1B 04 < HCI Command: Remote Name Request (0x01|0x0019) plen 10 C8 0C 9D AB 21 00 02 00 00 00 > HCI Event: Command Status (0x0f) plen 4 00 01 19 04 > HCI Event: Max Slots Change (0x1b) plen 3 00 00 05 < HCI Command: Disconnect (0x01|0x0006) plen 3 00 00 13 > HCI Event: Command Status (0x0f) plen 4 00 01 06 04 > HCI Event: Disconn Complete (0x05) plen 4 00 00 00 16 Since you mentioned that you suspect that this is a USB problem, attached is the usbmon capture of trying to l2ping the phone (usbmon_l2ping_bt_dongle.txt). Also attached are the contents of /proc/bus/usb/devices at the time of testing (devices.txt). Finally, I note that my problem seems to be identical to the one described in: http://bbs.archlinux.org/viewtopic.php?id=60158 The user there also notes that this is a regression introduces in 2.6.27, which is also my experience. I hope this helps. Much obliged. -- B. Gitonga Marete Tel: +254-722-151-590