* [GIT PULL FOR v4.19] v2: Various fixes
@ 2018-07-27 9:45 Hans Verkuil
0 siblings, 0 replies; only message in thread
From: Hans Verkuil @ 2018-07-27 9:45 UTC (permalink / raw)
To: Linux Media Mailing List
The following changes since commit 343b23a7c6b6680ef949e6112a4ee60688acf39d:
media: gpu: ipu-v3: Allow negative offsets for interlaced scanning (2018-07-26 15:21:50 -0400)
are available in the Git repository at:
git://linuxtv.org/hverkuil/media_tree.git for-v4.19n
for you to fetch changes up to cfc3de9d4ae9cef3df1141a532d1fe88a54813c3:
media: pci: ivtv: Replace GFP_ATOMIC with GFP_KERNEL (2018-07-27 11:43:55 +0200)
Various fixes for 4.19.
Same as https://patchwork.linuxtv.org/patch/51246/, but dropped the
"rcar-csi2: update stream start for V3M" patch since Laurent had some
review comments about that one.
Regards,
Hans
----------------------------------------------------------------
Ezequiel Garcia (1):
rockchip/rga: Fix bad dma_free_attrs() parameter
Hans Verkuil (1):
media.h: remove linux/version.h include
Jia-Ju Bai (10):
media: i2c: adv7842: Replace mdelay() with msleep() and usleep_range() in adv7842_ddr_ram_test()
media: i2c: vs6624: Replace mdelay() with msleep() and usleep_range() in vs6624_probe()
media: pci: cobalt: Replace GFP_ATOMIC with GFP_KERNEL in cobalt_probe()
media: pci: cx23885: Replace mdelay() with msleep() and usleep_range() in altera_ci_slot_reset()
media: pci: cx23885: Replace mdelay() with msleep() and usleep_range() in cx23885_gpio_setup()
media: pci: cx23885: Replace mdelay() with msleep() in cx23885_reset()
media: pci: cx25821: Replace mdelay() with msleep()
media: pci: cx88: Replace mdelay() with msleep() in cx88_card_setup_pre_i2c()
media: pci: cx88: Replace mdelay() with msleep() in dvb_register()
media: pci: ivtv: Replace GFP_ATOMIC with GFP_KERNEL
Matt Ranostay (1):
media: video-i2c: hwmon: fix return value from amg88xx_hwmon_init()
Nicolas Dufresne (1):
vivid: Fix V4L2_FIELD_ALTERNATE new frame check
Niklas Söderlund (2):
adv7180: fix field type to V4L2_FIELD_ALTERNATE
adv7180: add g_frame_interval support
Philipp Zabel (2):
media: coda: let CODA960 firmware set frame cropping in SPS header
media: coda: add SPS fixup code for frame sizes that are not multiples of 16
drivers/media/i2c/adv7180.c | 30 +++++-
drivers/media/i2c/adv7842.c | 8 +-
drivers/media/i2c/video-i2c.c | 2 +-
drivers/media/i2c/vs6624.c | 4 +-
drivers/media/media-device.c | 1 +
drivers/media/pci/cobalt/cobalt-driver.c | 2 +-
drivers/media/pci/cx23885/altera-ci.c | 2 +-
drivers/media/pci/cx23885/cx23885-cards.c | 82 +++++++-------
drivers/media/pci/cx23885/cx23885-core.c | 2 +-
drivers/media/pci/cx25821/cx25821-core.c | 4 +-
drivers/media/pci/cx25821/cx25821-gpio.c | 2 +-
drivers/media/pci/cx88/cx88-cards.c | 4 +-
drivers/media/pci/cx88/cx88-dvb.c | 20 ++--
drivers/media/pci/ivtv/ivtv-driver.c | 2 +-
drivers/media/pci/ivtv/ivtvfb.c | 2 +-
drivers/media/platform/coda/coda-bit.c | 40 +++++++
drivers/media/platform/coda/coda-h264.c | 316 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/media/platform/coda/coda.h | 2 +
drivers/media/platform/rockchip/rga/rga.c | 2 +-
drivers/media/platform/vivid/vivid-kthread-cap.c | 2 +-
include/uapi/linux/media.h | 3 +-
21 files changed, 455 insertions(+), 77 deletions(-)
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2018-07-27 11:07 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-07-27 9:45 [GIT PULL FOR v4.19] v2: Various fixes Hans Verkuil
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.