From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Thu, 17 May 2018 19:08:37 +0200 Subject: [U-Boot] [PULL] Please pull u-boot-imx In-Reply-To: References: Message-ID: <70d3e1b7-4db0-122a-b55c-4d6879324dea@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit To: u-boot@lists.denx.de On 17/05/2018 18:33, Lukasz Majewski wrote: > Hi Stefano, Tom, > Tom was not in CC, added > On 17 May 2018 17:50, Stefano Babic wrote: > > Hi Tom, > > please pull from u-boot-imx, thanks ! > > The following changes since commit > f2d0f5e7ab3b8a7b4bf6e2ac499b4867c701d52d: > >   ARM: re-enable MVGBE for edminiv2 (2018-05-16 11:38:08 -0400) > > are available in the git repository at: > >   git://www.denx.de/git/u-boot-imx.git master > > for you to fetch changes up to 2f5988533d5c447d7bda79b0d9719f84db9e1835: > >   imx6: sabrelite: update defconfig to use distro defaults (2018-05-17 > 17:47:17 +0200) > > ---------------------------------------------------------------- > Guillaume GARDET (2): >       imx6: Convert sabrelite and nitrogen6x boards to distro boot > support >       imx6: sabrelite: update defconfig to use distro defaults > > Ian Ray (6): >       board: ge: bx50v3: add winbond SPI NOR support >       board: ge: bx50v3: rename detect_baseboard function >       board: ge: bx50v3: fix display support for b{46}50v3 >       board: ge: bx50v3: use VPD instead of compile-time checks >       board: ge: bx50v3: configure video arguments using VPD >       board: ge: bx50v3: remove redundant targets > > Lukasz Majewski (8): >       dts: imx53: Add gpio and i2c nodes to imx53.dtsi file >       dts: pinctrl: Provide IMX_PAD_SION definition for imx53 pinctrl > > > Two above patches are correct. > >       pmic: fsl: Provide some more definitions for MC34708 PMIC >       pmic: fsl: Define number of bytes sent at once by MC34708 PMIC >       pmic: dm: Provide *trans_len() callback for pmic-uclass >       pmic: dm: Rewrite pmic_reg_{read|write} and pmic_clrsetbits to > support transmissions larger than 1 byte >       pmic: dm: Add support for MC34708 for PMIC DM >       arm: imx53: Add support for imx53 boards from K+P > > > Stefano, Tom please drop above patches as they were superseded by v2 and > v3 (after discussion with Simon). I have just added the pmic patches due to the dependency in "arm: imx53: Add support for imx53 boards from K+P", and I have not seen any change request in them. I drop the series, Tom please wait, I will send a new PR after. > > IMHO v3 is eligible for pulling: > https://patchwork.ozlabs.org/patch/913670/ > Should they flow into Jaehoon's tree instead of u-boot-imx ? Best regards, Stefano > BR, > Łukasz Majewski > > Magnus Lilja (2): >       mx31pdk: Convert CONFIG_MX31 flag to use Kconfig. >       mx31: Convert MX31_HCLK_FREQ and MX31_CLK32 to Kconfig. > > Nandor Han (2): >       board: ge: bx50v3: unify two switch statements >       board: ge: bx50v3: detect the monitor type by reading VPD earlier > > Peter Robinson (4): >       mx6 common: remove dangling comment >       mx7: remove empty ifndef statement >       mx6: Select CONFIG_MP with MX6_SMP >       mx6: remove duplicated BOUNCE_BUFFER defines > > Sebastian Reichel (1): >       ge: ppd: move CONFIG_ENV_IS_IN_MMC to defconfig > > arch/arm/Kconfig                                     |  14 +++---- > arch/arm/dts/imx53-kp.dts                            | 135 > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > arch/arm/dts/imx53-pinfunc.h                         |   1 + > arch/arm/dts/imx53.dtsi                              | 101 > +++++++++++++++++++++++++++++++++++++++++++++++- > arch/arm/include/asm/arch-mx31/clock.h               |   8 ---- > arch/arm/mach-imx/mx3/Kconfig                        |  34 > +++++++++++++++++ > arch/arm/mach-imx/mx5/Kconfig                        |  12 ++++++ > arch/arm/mach-imx/mx6/Kconfig                        |  15 ++------ > board/ge/bx50v3/Kconfig                              |   2 +- > board/ge/bx50v3/bx50v3.c                             |  71 > ++++++++++++++++++++++------------ > board/k+p/kp_imx53/Kconfig                           |  15 ++++++++ > board/k+p/kp_imx53/MAINTAINERS                       |   6 +++ > board/k+p/kp_imx53/Makefile                          |   8 ++++ > board/k+p/kp_imx53/kp_id_rev.c                       | 121 > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > board/k+p/kp_imx53/kp_id_rev.h                       |  28 > ++++++++++++++ > board/k+p/kp_imx53/kp_imx53.c                        | 212 > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > configs/ge_b650v3_defconfig                          |  43 > --------------------- > configs/ge_b850v3_defconfig                          |  43 > --------------------- > configs/{ge_b450v3_defconfig => ge_bx50v3_defconfig} |   4 +- > configs/kp_imx53_defconfig                           |  40 > +++++++++++++++++++ > configs/mx31pdk_defconfig                            |   3 +- > configs/mx53ppd_defconfig                            |   1 + > configs/mx6qsabrelite_defconfig                      |  15 +++----- > drivers/power/pmic/Kconfig                           |   7 ++++ > drivers/power/pmic/Makefile                          |   1 + > drivers/power/pmic/mc34708.c                         | 103 > +++++++++++++++++++++++++++++++++++++++++++++++++ > drivers/power/pmic/pmic-uclass.c                     |  48 > +++++++++++++++++------ > include/configs/advantech_dms-ba16.h                 |   1 - > include/configs/apalis_imx6.h                        |   1 - > include/configs/colibri_imx6.h                       |   1 - > include/configs/dh_imx6.h                            |   1 - > include/configs/ge_bx50v3.h                          |  17 +-------- > include/configs/kp_imx53.h                           | 113 > ++++++++++++++++++++++++++++++++++++++++++++++++++++++ > include/configs/kp_imx6q_tpc.h                       |   2 - > include/configs/mx31pdk.h                            |   2 - > include/configs/mx53ppd.h                            |   1 - > include/configs/mx6_common.h                         |   3 -- > include/configs/mx7_common.h                         |   3 -- > include/configs/nitrogen6x.h                         | 179 > +++++++++++++++++++++---------------------------------------------------------------- > include/fsl_pmic.h                                   |  41 > ++++++++++++++++++++ > include/power/pmic.h                                 |   2 + > 41 files changed, 1126 insertions(+), 332 deletions(-) > create mode 100644 arch/arm/dts/imx53-kp.dts > create mode 100644 arch/arm/mach-imx/mx3/Kconfig > create mode 100644 board/k+p/kp_imx53/Kconfig > create mode 100644 board/k+p/kp_imx53/MAINTAINERS > create mode 100644 board/k+p/kp_imx53/Makefile > create mode 100644 board/k+p/kp_imx53/kp_id_rev.c > create mode 100644 board/k+p/kp_imx53/kp_id_rev.h > create mode 100644 board/k+p/kp_imx53/kp_imx53.c > delete mode 100644 configs/ge_b650v3_defconfig > delete mode 100644 configs/ge_b850v3_defconfig > rename configs/{ge_b450v3_defconfig => ge_bx50v3_defconfig} (93%) > create mode 100644 configs/kp_imx53_defconfig > create mode 100644 drivers/power/pmic/mc34708.c > create mode 100644 include/configs/kp_imx53.h > > -- > ===================================================================== > DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de > ===================================================================== > _______________________________________________ > U-Boot mailing list > U-Boot at lists.denx.de > https://lists.denx.de/listinfo/u-boot > > -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================