From mboxrd@z Thu Jan 1 00:00:00 1970 Received: with ECARTIS (v1.0.0; list linux-mips); Fri, 06 May 2011 22:07:37 +0200 (CEST) Received: from mx1.netlogicmicro.com ([12.203.210.36]:4836 "EHLO orion5.netlogicmicro.com" rhost-flags-OK-OK-OK-FAIL) by eddie.linux-mips.org with ESMTP id S1491107Ab1EFUHA (ORCPT ); Fri, 6 May 2011 22:07:00 +0200 X-TM-IMSS-Message-ID: <2cf5f8610003a954@netlogicmicro.com> Received: from orion8.netlogicmicro.com ([10.10.16.60]) by netlogicmicro.com ([10.10.16.19]) with ESMTP (TREND IMSS SMTP Service 7.0) id 2cf5f8610003a954 ; Fri, 6 May 2011 13:06:32 -0700 Received: from jayachandranc.netlogicmicro.com ([10.7.0.77]) by orion8.netlogicmicro.com with Microsoft SMTPSVC(6.0.3790.3959); Fri, 6 May 2011 13:07:41 -0700 Date: Sat, 7 May 2011 01:37:52 +0530 From: Jayachandran C To: ralf@linux-mips.org Cc: linux-mips@linux-mips.org Subject: [PATCH 8/8] USB support for XLS platforms. Message-ID: <70d6e74aef472dfde06b0aeb4a63ebaf7666b155.1304712046.git.jayachandranc@netlogicmicro.com> References: MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.5.20 (2009-06-14) X-OriginalArrivalTime: 06 May 2011 20:07:41.0682 (UTC) FILETIME=[415EB520:01CC0C29] Return-Path: X-Envelope-To: <"|/home/ecartis/ecartis -s linux-mips"> (uid 0) X-Orcpt: rfc822;linux-mips@linux-mips.org Original-Recipient: rfc822;linux-mips@linux-mips.org X-archive-position: 29849 X-ecartis-version: Ecartis v1.0.0 Sender: linux-mips-bounce@linux-mips.org Errors-to: linux-mips-bounce@linux-mips.org X-original-sender: jayachandranc@netlogicmicro.com Precedence: bulk X-list: linux-mips update ehci-hcd.c and ohci-hcd.c to add XLS hcds add ehci/ohci devices to XLR/XLS platform driver Kconfig update Signed-off-by: Jayachandran C --- arch/mips/Kconfig | 2 + arch/mips/netlogic/xlr/platform.c | 89 ++++++++++++++++++++ drivers/usb/host/ehci-hcd.c | 5 + drivers/usb/host/ehci-xls.c | 161 +++++++++++++++++++++++++++++++++++++ drivers/usb/host/ohci-hcd.c | 5 + drivers/usb/host/ohci-xls.c | 151 ++++++++++++++++++++++++++++++++++ 6 files changed, 413 insertions(+), 0 deletions(-) create mode 100644 drivers/usb/host/ehci-xls.c create mode 100644 drivers/usb/host/ohci-xls.c diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 5016caa..7fa4f01 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -759,6 +759,8 @@ config NLM_XLR_BOARD select ZONE_DMA if 64BIT select SYNC_R4K select SYS_HAS_EARLY_PRINTK + select USB_ARCH_HAS_OHCI if USB_SUPPORT + select USB_ARCH_HAS_EHCI if USB_SUPPORT help Support for systems based on Netlogic XLR and XLS processors. Say Y here if you have a XLR or XLS based board. diff --git a/arch/mips/netlogic/xlr/platform.c b/arch/mips/netlogic/xlr/platform.c index 609ec25..bdcab10 100644 --- a/arch/mips/netlogic/xlr/platform.c +++ b/arch/mips/netlogic/xlr/platform.c @@ -96,3 +96,92 @@ static int __init nlm_uart_init(void) } arch_initcall(nlm_uart_init); + +#ifdef CONFIG_USB +/* Platform USB devices, only on XLS chips */ +static u64 xls_usb_dmamask = ~(u32)0; +#define USB_PLATFORM_DEV(n, i, irq) \ + { \ + .name = n, \ + .id = i, \ + .num_resources = 2, \ + .dev = { \ + .dma_mask = &xls_usb_dmamask, \ + .coherent_dma_mask = 0xffffffff, \ + }, \ + .resource = (struct resource[]) { \ + { \ + .flags = IORESOURCE_MEM, \ + }, \ + { \ + .start = irq, \ + .end = irq, \ + .flags = IORESOURCE_IRQ, \ + }, \ + }, \ + } + +static struct platform_device xls_usb_ehci_device = + USB_PLATFORM_DEV("ehci-xls", 0, PIC_USB_IRQ); +static struct platform_device xls_usb_ohci_device_0 = + USB_PLATFORM_DEV("ohci-xls-0", 1, PIC_USB_IRQ); +static struct platform_device xls_usb_ohci_device_1 = + USB_PLATFORM_DEV("ohci-xls-1", 2, PIC_USB_IRQ); + +static struct platform_device *xls_platform_devices[] __initdata = { + &xls_usb_ehci_device, + &xls_usb_ohci_device_0, + &xls_usb_ohci_device_1, +}; + +int xls_platform_usb_init(void) +{ + nlm_reg_t *usb_mmio, *gpio_mmio; + unsigned long memres; + uint32_t val; + + if (!nlm_chip_is_xls()) + return 0; + + gpio_mmio = netlogic_io_mmio(NETLOGIC_IO_GPIO_OFFSET); + usb_mmio = netlogic_io_mmio(NETLOGIC_IO_USB_1_OFFSET); + + /* Clear Rogue Phy INTs */ + netlogic_write_reg(usb_mmio, 49, 0x10000000); + /* Enable all interrupts */ + netlogic_write_reg(usb_mmio, 50, 0x1f000000); + + /* Enable ports */ + netlogic_write_reg(usb_mmio, 1, 0x07000500); + + val = netlogic_read_reg(gpio_mmio, 21); + if (((val >> 22) & 0x01) == 0) { + pr_info("Detected USB Device mode - Not supported!\n"); + netlogic_write_reg(usb_mmio, 0, 0x01000000); + return 0; + } + + pr_info("Detected USB Host mode - Adding XLS USB devices.\n"); + /* Clear reset, host mode */ + netlogic_write_reg(usb_mmio, 0, 0x02000000); + + /* Memory resource for various XLS usb ports */ + usb_mmio = netlogic_io_mmio(NETLOGIC_IO_USB_0_OFFSET); + memres = CPHYSADDR((unsigned long)usb_mmio); + xls_usb_ehci_device.resource[0].start = memres; + xls_usb_ehci_device.resource[0].end = memres + 0x400 - 1; + + memres += 0x400; + xls_usb_ohci_device_0.resource[0].start = memres; + xls_usb_ohci_device_0.resource[0].end = memres + 0x400 - 1; + + memres += 0x400; + xls_usb_ohci_device_1.resource[0].start = memres; + xls_usb_ohci_device_1.resource[0].end = memres + 0x400 - 1; + + return platform_add_devices(xls_platform_devices, + ARRAY_SIZE(xls_platform_devices)); +} + +arch_initcall(xls_platform_usb_init); +#endif diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 78561d1..fde78c9 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1265,6 +1265,11 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER tegra_ehci_driver #endif +#ifdef CONFIG_NLM_XLR +#include "ehci-xls.c" +#define PLATFORM_DRIVER ehci_xls_driver +#endif + #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \ !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \ !defined(XILINX_OF_PLATFORM_DRIVER) diff --git a/drivers/usb/host/ehci-xls.c b/drivers/usb/host/ehci-xls.c new file mode 100644 index 0000000..fe74bd6 --- /dev/null +++ b/drivers/usb/host/ehci-xls.c @@ -0,0 +1,161 @@ +/* + * EHCI HCD for Netlogic XLS processors. + * + * (C) Copyright 2011 Netlogic Microsystems Inc. + * + * Based on various ehci-*.c drivers + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + */ + +#include + +static int ehci_xls_setup(struct usb_hcd *hcd) +{ + int retval; + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + + ehci->caps = hcd->regs; + ehci->regs = hcd->regs + + HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); + dbg_hcs_params(ehci, "reset"); + dbg_hcc_params(ehci, "reset"); + + /* cache this readonly data; minimize chip reads */ + ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); + + retval = ehci_halt(ehci); + if (retval) + return retval; + + /* data structure init */ + retval = ehci_init(hcd); + if (retval) + return retval; + + ehci_reset(ehci); + + return retval; +} + +int ehci_xls_probe_internal(const struct hc_driver *driver, + struct platform_device *pdev) +{ + struct usb_hcd *hcd; + struct resource *res; + int retval, irq; + + /* Get our IRQ from an earlier registered Platform Resource */ + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "Found HC with no IRQ. Check %s setup!\n", + dev_name(&pdev->dev)); + return -ENODEV; + } + + /* Get our Memory Handle */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "Error: MMIO Handle %s setup!\n", + dev_name(&pdev->dev)); + return -ENODEV; + } + hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); + if (!hcd) { + retval = -ENOMEM; + goto err1; + } + + hcd->rsrc_start = res->start; + hcd->rsrc_len = res->end - res->start + 1; + + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, + driver->description)) { + dev_dbg(&pdev->dev, "controller already in use\n"); + retval = -EBUSY; + goto err2; + } + hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); + + if (hcd->regs == NULL) { + dev_dbg(&pdev->dev, "error mapping memory\n"); + retval = -EFAULT; + goto err3; + } + + retval = usb_add_hcd(hcd, irq, IRQF_SHARED); + if (retval != 0) + goto err4; + return retval; + +err4: + iounmap(hcd->regs); +err3: + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); +err2: + usb_put_hcd(hcd); +err1: + dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), + retval); + return retval; +} + +static struct hc_driver ehci_xls_hc_driver = { + .description = hcd_name, + .product_desc = "XLS EHCI Host Controller", + .hcd_priv_size = sizeof(struct ehci_hcd), + .irq = ehci_irq, + .flags = HCD_USB2 | HCD_MEMORY, + .reset = ehci_xls_setup, + .start = ehci_run, + .stop = ehci_stop, + .shutdown = ehci_shutdown, + + .urb_enqueue = ehci_urb_enqueue, + .urb_dequeue = ehci_urb_dequeue, + .endpoint_disable = ehci_endpoint_disable, + .endpoint_reset = ehci_endpoint_reset, + + .get_frame_number = ehci_get_frame, + + .hub_status_data = ehci_hub_status_data, + .hub_control = ehci_hub_control, + .bus_suspend = ehci_bus_suspend, + .bus_resume = ehci_bus_resume, + .relinquish_port = ehci_relinquish_port, + .port_handed_over = ehci_port_handed_over, + + .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, +}; + +static int ehci_xls_probe(struct platform_device *pdev) +{ + if (usb_disabled()) + return -ENODEV; + + return ehci_xls_probe_internal(&ehci_xls_hc_driver, pdev); +} + +static int ehci_xls_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + + usb_remove_hcd(hcd); + iounmap(hcd->regs); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + usb_put_hcd(hcd); + return 0; +} + +MODULE_ALIAS("ehci-xls"); + +static struct platform_driver ehci_xls_driver = { + .probe = ehci_xls_probe, + .remove = ehci_xls_remove, + .shutdown = usb_hcd_platform_shutdown, + .driver = { + .name = "ehci-xls", + }, +}; diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index d557235..7b8c12b 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -1105,6 +1105,11 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ohci_hcd_cns3xxx_driver #endif +#ifdef CONFIG_NLM_XLR +#include "ohci-xls.c" +#define PLATFORM_DRIVER ohci_xls_driver +#endif + #if !defined(PCI_DRIVER) && \ !defined(PLATFORM_DRIVER) && \ !defined(OMAP1_PLATFORM_DRIVER) && \ diff --git a/drivers/usb/host/ohci-xls.c b/drivers/usb/host/ohci-xls.c new file mode 100644 index 0000000..a3a9c6f --- /dev/null +++ b/drivers/usb/host/ohci-xls.c @@ -0,0 +1,151 @@ +/* + * OHCI HCD for Netlogic XLS processors. + * + * (C) Copyright 2011 Netlogic Microsystems Inc. + * + * Based on ohci-au1xxx.c, and other Linux OHCI drivers. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + */ + +#include +#include + +static int ohci_xls_probe_internal(const struct hc_driver *driver, + struct platform_device *dev) +{ + struct resource *res; + struct usb_hcd *hcd; + int retval, irq; + + /* Get our IRQ from an earlier registered Platform Resource */ + irq = platform_get_irq(dev, 0); + if (irq < 0) { + dev_err(&dev->dev, "Found HC with no IRQ\n"); + return -ENODEV; + } + + /* Get our Memory Handle */ + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&dev->dev, "MMIO Handle incorrect!\n"); + return -ENODEV; + } + + hcd = usb_create_hcd(driver, &dev->dev, "XLS"); + if (!hcd) { + retval = -ENOMEM; + goto err1; + } + hcd->rsrc_start = res->start; + hcd->rsrc_len = res->end - res->start + 1; + + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, + driver->description)) { + dev_dbg(&dev->dev, "Controller already in use\n"); + retval = -EBUSY; + goto err2; + } + + hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); + if (hcd->regs == NULL) { + dev_dbg(&dev->dev, "error mapping memory\n"); + retval = -EFAULT; + goto err3; + } + + retval = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); + if (retval != 0) + goto err4; + return retval; + +err4: + iounmap(hcd->regs); +err3: + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); +err2: + usb_put_hcd(hcd); +err1: + dev_err(&dev->dev, "init fail, %d\n", retval); + return retval; +} + +static int ohci_xls_reset(struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + + ohci_hcd_init(ohci); + return ohci_init(ohci); +} + +static int __devinit ohci_xls_start(struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci; + int ret; + + ohci = hcd_to_ohci(hcd); + ret = ohci_run(ohci); + if (ret < 0) { + err("can't start %s", hcd->self.bus_name); + ohci_stop(hcd); + return ret; + } + return 0; +} + +static struct hc_driver ohci_xls_hc_driver = { + .description = hcd_name, + .product_desc = "XLS OHCI Host Controller", + .hcd_priv_size = sizeof(struct ohci_hcd), + .irq = ohci_irq, + .flags = HCD_MEMORY | HCD_USB11, + .reset = ohci_xls_reset, + .start = ohci_xls_start, + .stop = ohci_stop, + .shutdown = ohci_shutdown, + .urb_enqueue = ohci_urb_enqueue, + .urb_dequeue = ohci_urb_dequeue, + .endpoint_disable = ohci_endpoint_disable, + .get_frame_number = ohci_get_frame, + .hub_status_data = ohci_hub_status_data, + .hub_control = ohci_hub_control, +#ifdef CONFIG_PM + .bus_suspend = ohci_bus_suspend, + .bus_resume = ohci_bus_resume, +#endif + .start_port_reset = ohci_start_port_reset, +}; + +static int ohci_xls_probe(struct platform_device *dev) +{ + int ret; + + pr_debug("In ohci_xls_probe"); + if (usb_disabled()) + return -ENODEV; + ret = ohci_xls_probe_internal(&ohci_xls_hc_driver, dev); + return ret; +} + +static int ohci_xls_remove(struct platform_device *dev) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + + usb_remove_hcd(hcd); + iounmap(hcd->regs); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + usb_put_hcd(hcd); + return 0; +} + +static struct platform_driver ohci_xls_driver = { + .probe = ohci_xls_probe, + .remove = ohci_xls_remove, + .shutdown = usb_hcd_platform_shutdown, + .driver = { + .name = "ohci-xls-0", + .owner = THIS_MODULE, + }, +}; -- 1.7.1 -- Jayachandran C. jayachandranc@netlogicmicro.com (Netlogic Microsystems)