From: Baruch Siach <baruch@tkos.co.il> To: "Thierry Reding" <thierry.reding@gmail.com>, "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>, "Lee Jones" <lee.jones@linaro.org> Cc: Baruch Siach <baruch@tkos.co.il>, Andy Gross <agross@kernel.org>, Bjorn Andersson <bjorn.andersson@linaro.org>, Balaji Prakash J <bjagadee@codeaurora.org>, Rob Herring <robh+dt@kernel.org>, Robert Marko <robert.marko@sartura.hr>, Kathiravan T <kathirav@codeaurora.org>, linux-pwm@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v6 3/4] dt-bindings: pwm: add IPQ6018 binding Date: Thu, 22 Jul 2021 13:01:09 +0300 [thread overview] Message-ID: <70f0522a9394e9da2f31871442d47f6ad0ff41aa.1626948070.git.baruch@tkos.co.il> (raw) In-Reply-To: <889aae1b88f120cb6281919d27164a959fbe69d0.1626948070.git.baruch@tkos.co.il> DT binding for the PWM block in Qualcomm IPQ6018 SoC. Signed-off-by: Baruch Siach <baruch@tkos.co.il> --- v6: Device node is child of TCSR; remove phandle (Rob Herring) Add assigned-clocks/assigned-clock-rates (Uwe Kleine-König) v5: Use qcom,pwm-regs for phandle instead of direct regs (Bjorn Andersson, Kathiravan T) v4: Update the binding example node as well (Rob Herring's bot) v3: s/qcom,pwm-ipq6018/qcom,ipq6018-pwm/ (Rob Herring) v2: Make #pwm-cells const (Rob Herring) --- .../devicetree/bindings/pwm/ipq-pwm.yaml | 69 +++++++++++++++++++ 1 file changed, 69 insertions(+) create mode 100644 Documentation/devicetree/bindings/pwm/ipq-pwm.yaml diff --git a/Documentation/devicetree/bindings/pwm/ipq-pwm.yaml b/Documentation/devicetree/bindings/pwm/ipq-pwm.yaml new file mode 100644 index 000000000000..ee2bb03a1223 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/ipq-pwm.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/ipq-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm IPQ6018 PWM controller + +maintainers: + - Baruch Siach <baruch@tkos.co.il> + +properties: + "#pwm-cells": + const: 2 + + compatible: + const: qcom,ipq6018-pwm + + offset: + description: | + Offset of PWM register in the TCSR block. + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: core + + assigned-clocks: + maxItems: 1 + + assigned-clock-rates: + maxItems: 1 + +required: + - "#pwm-cells" + - compatible + - clocks + - clock-names + - assigned-clocks + - assigned-clock-rates + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-ipq6018.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + tcsr: syscon@1937000 { + compatible = "syscon", "simple-mfd"; + reg = <0x0 0x01937000 0x0 0x21000>; + + pwm: pwm { + #pwm-cells = <2>; + compatible = "qcom,ipq6018-pwm"; + offset = <0xa010>; + clocks = <&gcc GCC_ADSS_PWM_CLK>; + clock-names = "core"; + assigned-clocks = <&gcc GCC_ADSS_PWM_CLK>; + assigned-clock-rates = <100000000>; + status = "disabled"; + }; + }; + }; -- 2.30.2
WARNING: multiple messages have this Message-ID (diff)
From: Baruch Siach <baruch@tkos.co.il> To: "Thierry Reding" <thierry.reding@gmail.com>, "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>, "Lee Jones" <lee.jones@linaro.org> Cc: Baruch Siach <baruch@tkos.co.il>, Andy Gross <agross@kernel.org>, Bjorn Andersson <bjorn.andersson@linaro.org>, Balaji Prakash J <bjagadee@codeaurora.org>, Rob Herring <robh+dt@kernel.org>, Robert Marko <robert.marko@sartura.hr>, Kathiravan T <kathirav@codeaurora.org>, linux-pwm@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v6 3/4] dt-bindings: pwm: add IPQ6018 binding Date: Thu, 22 Jul 2021 13:01:09 +0300 [thread overview] Message-ID: <70f0522a9394e9da2f31871442d47f6ad0ff41aa.1626948070.git.baruch@tkos.co.il> (raw) In-Reply-To: <889aae1b88f120cb6281919d27164a959fbe69d0.1626948070.git.baruch@tkos.co.il> DT binding for the PWM block in Qualcomm IPQ6018 SoC. Signed-off-by: Baruch Siach <baruch@tkos.co.il> --- v6: Device node is child of TCSR; remove phandle (Rob Herring) Add assigned-clocks/assigned-clock-rates (Uwe Kleine-König) v5: Use qcom,pwm-regs for phandle instead of direct regs (Bjorn Andersson, Kathiravan T) v4: Update the binding example node as well (Rob Herring's bot) v3: s/qcom,pwm-ipq6018/qcom,ipq6018-pwm/ (Rob Herring) v2: Make #pwm-cells const (Rob Herring) --- .../devicetree/bindings/pwm/ipq-pwm.yaml | 69 +++++++++++++++++++ 1 file changed, 69 insertions(+) create mode 100644 Documentation/devicetree/bindings/pwm/ipq-pwm.yaml diff --git a/Documentation/devicetree/bindings/pwm/ipq-pwm.yaml b/Documentation/devicetree/bindings/pwm/ipq-pwm.yaml new file mode 100644 index 000000000000..ee2bb03a1223 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/ipq-pwm.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/ipq-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm IPQ6018 PWM controller + +maintainers: + - Baruch Siach <baruch@tkos.co.il> + +properties: + "#pwm-cells": + const: 2 + + compatible: + const: qcom,ipq6018-pwm + + offset: + description: | + Offset of PWM register in the TCSR block. + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: core + + assigned-clocks: + maxItems: 1 + + assigned-clock-rates: + maxItems: 1 + +required: + - "#pwm-cells" + - compatible + - clocks + - clock-names + - assigned-clocks + - assigned-clock-rates + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-ipq6018.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + tcsr: syscon@1937000 { + compatible = "syscon", "simple-mfd"; + reg = <0x0 0x01937000 0x0 0x21000>; + + pwm: pwm { + #pwm-cells = <2>; + compatible = "qcom,ipq6018-pwm"; + offset = <0xa010>; + clocks = <&gcc GCC_ADSS_PWM_CLK>; + clock-names = "core"; + assigned-clocks = <&gcc GCC_ADSS_PWM_CLK>; + assigned-clock-rates = <100000000>; + status = "disabled"; + }; + }; + }; -- 2.30.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-07-22 10:11 UTC|newest] Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-07-22 10:01 [PATCH v6 1/4] arm64: dts: ipq6018: correct TCSR block area Baruch Siach 2021-07-22 10:01 ` Baruch Siach 2021-07-22 10:01 ` [PATCH v6 2/4] pwm: driver for qualcomm ipq6018 pwm block Baruch Siach 2021-07-22 10:01 ` Baruch Siach 2021-07-25 18:35 ` Bjorn Andersson 2021-07-25 18:35 ` Bjorn Andersson 2021-07-26 4:31 ` Baruch Siach 2021-07-26 4:31 ` Baruch Siach 2021-07-22 10:01 ` Baruch Siach [this message] 2021-07-22 10:01 ` [PATCH v6 3/4] dt-bindings: pwm: add IPQ6018 binding Baruch Siach 2021-07-23 23:03 ` Rob Herring 2021-07-23 23:03 ` Rob Herring 2021-07-25 18:27 ` Bjorn Andersson 2021-07-25 18:27 ` Bjorn Andersson 2021-07-26 4:08 ` Baruch Siach 2021-07-26 4:08 ` Baruch Siach 2021-07-26 17:48 ` Bjorn Andersson 2021-07-26 17:48 ` Bjorn Andersson 2021-07-26 20:38 ` Rob Herring 2021-07-26 20:38 ` Rob Herring 2021-07-22 10:01 ` [PATCH v6 4/4] arm64: dts: ipq6018: add pwm node Baruch Siach 2021-07-22 10:01 ` Baruch Siach
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=70f0522a9394e9da2f31871442d47f6ad0ff41aa.1626948070.git.baruch@tkos.co.il \ --to=baruch@tkos.co.il \ --cc=agross@kernel.org \ --cc=bjagadee@codeaurora.org \ --cc=bjorn.andersson@linaro.org \ --cc=devicetree@vger.kernel.org \ --cc=kathirav@codeaurora.org \ --cc=lee.jones@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-pwm@vger.kernel.org \ --cc=robert.marko@sartura.hr \ --cc=robh+dt@kernel.org \ --cc=thierry.reding@gmail.com \ --cc=u.kleine-koenig@pengutronix.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.