* [GIT PULL] arm64: soc: ZynqMP changes for v5.11 v2
@ 2020-12-09 18:41 ` Michal Simek
0 siblings, 0 replies; 4+ messages in thread
From: Michal Simek @ 2020-12-09 18:41 UTC (permalink / raw)
To: SoC Team; +Cc: arm-soc, linux-arm-kernel
Hi,
based on chat with Arnd I am sending v2 pull request which is based on
v5.10-rc2 with dropping one patch which will be queue later.
Arnd wanted to target arm/drivers branch.
Thanks,
Michal
The following changes since commit 3cea11cd5e3b00d91caf0b4730194039b45c5891:
Linux 5.10-rc2 (2020-11-01 14:43:51 -0800)
are available in the Git repository at:
https://github.com/Xilinx/linux-xlnx.git tags/zynqmp-soc-for-v5.11-v2
for you to fetch changes up to 311c2520de21cb2f44291ad3d984b42191126628:
firmware: xilinx: Properly align function parameter (2020-12-09
19:36:34 +0100)
----------------------------------------------------------------
arm64: soc: ZynqMP SoC changes for v5.11 v2
- Small alignments in Xilinx Firmware driver
- Exposing syscon interface for VCU driver
----------------------------------------------------------------
Michael Tretter (4):
soc: xilinx: vcu: drop useless success message
dt-bindings: soc: xlnx: extract xlnx, vcu-settings to separate binding
soc: xilinx: vcu: use vcu-settings syscon registers
soc: xilinx: vcu: add missing register NUM_CORE
Michal Simek (4):
firmware: xilinx: Fix kernel-doc warnings
firmware: xilinx: Remove additional newline
firmware: xilinx: Add a blank line after function declaration
firmware: xilinx: Properly align function parameter
Wendy Liang (1):
firmware: xlnx-zynqmp: fix compilation warning
Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu-settings.yaml |
34 ++++++++++++++++++++++++++++++++++
Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu.txt |
9 ++-------
drivers/firmware/xilinx/zynqmp.c |
46 +++++++++++++++++++++++-----------------------
drivers/soc/xilinx/Kconfig | 1 +
drivers/soc/xilinx/xlnx_vcu.c |
96
+++++++++++++++++++++++++++++++++++++++++++++++-------------------------------------------------
include/linux/firmware/xlnx-zynqmp.h |
45 ++++++++++++++++++++++++++++++++++++++++-----
include/linux/mfd/syscon/xlnx-vcu.h |
39 +++++++++++++++++++++++++++++++++++++++
7 files changed, 186 insertions(+), 84 deletions(-)
create mode 100644
Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu-settings.yaml
create mode 100644 include/linux/mfd/syscon/xlnx-vcu.h
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs
^ permalink raw reply [flat|nested] 4+ messages in thread
* [GIT PULL] arm64: soc: ZynqMP changes for v5.11 v2
@ 2020-12-09 18:41 ` Michal Simek
0 siblings, 0 replies; 4+ messages in thread
From: Michal Simek @ 2020-12-09 18:41 UTC (permalink / raw)
To: SoC Team; +Cc: arm-soc, linux-arm-kernel
Hi,
based on chat with Arnd I am sending v2 pull request which is based on
v5.10-rc2 with dropping one patch which will be queue later.
Arnd wanted to target arm/drivers branch.
Thanks,
Michal
The following changes since commit 3cea11cd5e3b00d91caf0b4730194039b45c5891:
Linux 5.10-rc2 (2020-11-01 14:43:51 -0800)
are available in the Git repository at:
https://github.com/Xilinx/linux-xlnx.git tags/zynqmp-soc-for-v5.11-v2
for you to fetch changes up to 311c2520de21cb2f44291ad3d984b42191126628:
firmware: xilinx: Properly align function parameter (2020-12-09
19:36:34 +0100)
----------------------------------------------------------------
arm64: soc: ZynqMP SoC changes for v5.11 v2
- Small alignments in Xilinx Firmware driver
- Exposing syscon interface for VCU driver
----------------------------------------------------------------
Michael Tretter (4):
soc: xilinx: vcu: drop useless success message
dt-bindings: soc: xlnx: extract xlnx, vcu-settings to separate binding
soc: xilinx: vcu: use vcu-settings syscon registers
soc: xilinx: vcu: add missing register NUM_CORE
Michal Simek (4):
firmware: xilinx: Fix kernel-doc warnings
firmware: xilinx: Remove additional newline
firmware: xilinx: Add a blank line after function declaration
firmware: xilinx: Properly align function parameter
Wendy Liang (1):
firmware: xlnx-zynqmp: fix compilation warning
Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu-settings.yaml |
34 ++++++++++++++++++++++++++++++++++
Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu.txt |
9 ++-------
drivers/firmware/xilinx/zynqmp.c |
46 +++++++++++++++++++++++-----------------------
drivers/soc/xilinx/Kconfig | 1 +
drivers/soc/xilinx/xlnx_vcu.c |
96
+++++++++++++++++++++++++++++++++++++++++++++++-------------------------------------------------
include/linux/firmware/xlnx-zynqmp.h |
45 ++++++++++++++++++++++++++++++++++++++++-----
include/linux/mfd/syscon/xlnx-vcu.h |
39 +++++++++++++++++++++++++++++++++++++++
7 files changed, 186 insertions(+), 84 deletions(-)
create mode 100644
Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu-settings.yaml
create mode 100644 include/linux/mfd/syscon/xlnx-vcu.h
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [GIT PULL] arm64: soc: ZynqMP changes for v5.11 v2
@ 2020-12-09 20:32 ` Arnd Bergmann
0 siblings, 0 replies; 4+ messages in thread
From: Arnd Bergmann @ 2020-12-09 20:32 UTC (permalink / raw)
To: SoC Team, Michal Simek; +Cc: Arnd Bergmann, linux-arm-kernel, arm-soc
From: Arnd Bergmann <arnd@arndb.de>
On Wed, 9 Dec 2020 19:41:52 +0100, Michal Simek wrote:
> based on chat with Arnd I am sending v2 pull request which is based on
> v5.10-rc2 with dropping one patch which will be queue later.
> Arnd wanted to target arm/drivers branch.
>
> Thanks,
> Michal
>
> The following changes since commit 3cea11cd5e3b00d91caf0b4730194039b45c5891:
>
> [...]
Merged into arm/drivers, thanks!
merge commit: 629c96256de49257b72407ebd256343938234cfa
Arnd
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [GIT PULL] arm64: soc: ZynqMP changes for v5.11 v2
@ 2020-12-09 20:32 ` Arnd Bergmann
0 siblings, 0 replies; 4+ messages in thread
From: Arnd Bergmann @ 2020-12-09 20:32 UTC (permalink / raw)
To: SoC Team, Michal Simek; +Cc: arm-soc, linux-arm-kernel, Arnd Bergmann
From: Arnd Bergmann <arnd@arndb.de>
On Wed, 9 Dec 2020 19:41:52 +0100, Michal Simek wrote:
> based on chat with Arnd I am sending v2 pull request which is based on
> v5.10-rc2 with dropping one patch which will be queue later.
> Arnd wanted to target arm/drivers branch.
>
> Thanks,
> Michal
>
> The following changes since commit 3cea11cd5e3b00d91caf0b4730194039b45c5891:
>
> [...]
Merged into arm/drivers, thanks!
merge commit: 629c96256de49257b72407ebd256343938234cfa
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-12-09 20:34 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-12-09 18:41 [GIT PULL] arm64: soc: ZynqMP changes for v5.11 v2 Michal Simek
2020-12-09 18:41 ` Michal Simek
2020-12-09 20:32 ` Arnd Bergmann
2020-12-09 20:32 ` Arnd Bergmann
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.