From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marek Vasut <marex@denx.de>
Date: Thu, 6 Sep 2018 23:56:40 +0200
Subject: [U-Boot] [PATCH v2 2/2] spl: socfpga: stratix10: add hex file
 output for spl image
In-Reply-To: <661d622b7f5685fd0673fa2b87e961c531a1654f.camel@linux.intel.com>
References: <20180906030235.8186-1-dwesterg@gmail.com>
 <20180906030235.8186-2-dwesterg@gmail.com>
 <7e5967ae-c6a7-1a28-1a8c-578462e2a165@denx.de>
 <0e8d97e619b941cf32b0da03a726cdf865505c82.camel@linux.intel.com>
 <e183a076-2b5b-45cc-4dc2-fad41923fb0d@denx.de>
 <661d622b7f5685fd0673fa2b87e961c531a1654f.camel@linux.intel.com>
Message-ID: <7208f309-3519-fc89-8dc1-8e2358322da3@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 09/06/2018 11:26 PM, Dalon L Westergreen wrote:
> On Thu, 2018-09-06 at 15:41 +0200, Marek Vasut wrote:
>> On 09/06/2018 03:39 PM, Dalon L Westergreen wrote:
>> On Thu, 2018-09-06 at 12:09 +0200, Marek Vasut wrote:
>> On 09/06/2018 05:02 AM, Dalon Westergreen wrote:
>> Stratix10 requires a hex image of the spl for boot.  The hex
>> image is added to the FPGA configuration image and loaded to
>> the processor memory by the configuration engine.
>>
>> v2:
>>   -> add CONFIG_OF_EMBED to include dtb in elf
>>   -> generate hex from elf source
>>
>> Signed-off-by: Dalon Westergreen <dwesterg at gmail.com <mailto:dwesterg@gmail.com> <mailto:dwesterg at gmail.com <mailto:dwesterg@gmail.com>>>
>> ---
>>  configs/socfpga_stratix10_defconfig | 1 +
>>  scripts/Makefile.spl                | 6 ++++++
>>  2 files changed, 7 insertions(+)
>>
>> diff --git a/configs/socfpga_stratix10_defconfig b/configs/socfpga_stratix10_defconfig
>> index dceadff439..17cc732cbe 100644
>> --- a/configs/socfpga_stratix10_defconfig
>> +++ b/configs/socfpga_stratix10_defconfig
>> @@ -56,3 +56,4 @@ CONFIG_DM_USB=y
>>  CONFIG_USB_DWC2=y
>>  CONFIG_USB_STORAGE=y
>>  CONFIG_USE_TINY_PRINTF=y
>> +CONFIG_OF_EMBED=y
>>
>> Why is this needed ? And where did the objcopy hack go ? What is the
>> explanation here ?
>>
>> You suggested the use of CONFIG_OF_EMBED as an alternative to using the
>> u-boot-spl-dtb.bin for objcopy.
>> The intent is to ensure that the spl elf has the dtb included, and then
>> a simple objcopy to elf to hex is fine.
>> You no longer need the --change-address as the elf indicates the correct
>> start address, unlike the binary.
>>
>> And that's fine with your usecase ? Fine be me then ...
>>
>> diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl
>> index 76d08fd92b..b09bd40b2a 100644
>> --- a/scripts/Makefile.spl
>> +++ b/scripts/Makefile.spl
>> @@ -190,6 +190,7 @@ endif
>>  ifdef CONFIG_ARCH_SOCFPGA
>>  ALL-$(CONFIG_TARGET_SOCFPGA_GEN5)	+= $(obj)/$(SPL_BIN).sfp
>>  ALL-$(CONFIG_TARGET_SOCFPGA_ARRIA10)	+= $(obj)/$(SPL_BIN).sfp
>> +ALL-$(CONFIG_TARGET_SOCFPGA_STRATIX10)	+= $(obj)/$(SPL_BIN).hex
>>
>> CONFIG_SPL_TARGET "u-boot-spl.hex" can replace this addition I think ?
> 
> This doesnt actually work as CONFIG_SPL_TARGET doesnt appear to be an
> SPL target, but rather a
> target for creating combined u-boot + spl images at the top level. Adding
> 
> ALL-$(CONFIG_SPL_TARGET) += $(obj)/$(SPL_BIN).hex
> 
> in Makefile.spl and
> CONFIG_SPL_TARGET="u-boot-spl.hex"
> in the socfpga_stratix10_config
> 
> results in a build failure with no target for u-boot-spl.hex

I mean, just define CONFIG_SPL_TARGET and it should generate the
matching file automatically. See the README, it explains this macro.

-- 
Best regards,
Marek Vasut