From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1030358AbeE3IoF (ORCPT ); Wed, 30 May 2018 04:44:05 -0400 Received: from mail-lf0-f66.google.com ([209.85.215.66]:44900 "EHLO mail-lf0-f66.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S968753AbeE3Inx (ORCPT ); Wed, 30 May 2018 04:43:53 -0400 X-Google-Smtp-Source: ADUXVKJuB+d5JuvPDhnwuNBPDiGerL3BD/lS4q60mv7Rlmus1h9WzSiUPFnL4ErUZIPM277zhtTTCw== Date: Wed, 30 May 2018 11:43:43 +0300 From: Matti Vaittinen To: mturquette@baylibre.com, sboyd@kernel.org, robh+dt@kernel.org, mark.rutland@arm.com, lee.jones@linaro.org, lgirdwood@gmail.com, broonie@kernel.org, mazziesaccount@gmail.com Cc: linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, mikko.mutanen@fi.rohmeurope.com, heikki.haikola@fi.rohmeurope.com Subject: [PATCH v4 6/6] regulator: bd71837: BD71837 PMIC regulator driver Message-ID: <72e644d9855621ea8cfd7ec555e2da02403f21f6.1527669443.git.matti.vaittinen@fi.rohmeurope.com> References: MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.9.2 (2017-12-15) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Support for controlling the 8 bucks and 7 LDOs the PMIC contains. Signed-off-by: Matti Vaittinen --- drivers/regulator/Kconfig | 11 + drivers/regulator/Makefile | 1 + drivers/regulator/bd71837-regulator.c | 640 ++++++++++++++++++++++++++++++++++ 3 files changed, 652 insertions(+) create mode 100644 drivers/regulator/bd71837-regulator.c diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 097f61784a7d..139f4b53fea0 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -180,6 +180,17 @@ config REGULATOR_BCM590XX BCM590xx PMUs. This will enable support for the software controllable LDO/Switching regulators. +config REGULATOR_BD71837 + tristate "ROHM BD71837 Power Regulator" + depends on MFD_BD71837 + help + This driver supports voltage regulators on ROHM BD71837 PMIC. + This will enable support for the software controllable buck + and LDO regulators. + + This driver can also be built as a module. If so, the module + will be called bd71837-regulator. + config REGULATOR_BD9571MWV tristate "ROHM BD9571MWV Regulators" depends on MFD_BD9571MWV diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 590674fbecd7..1b4d8ec416c2 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -27,6 +27,7 @@ obj-$(CONFIG_REGULATOR_AS3711) += as3711-regulator.o obj-$(CONFIG_REGULATOR_AS3722) += as3722-regulator.o obj-$(CONFIG_REGULATOR_AXP20X) += axp20x-regulator.o obj-$(CONFIG_REGULATOR_BCM590XX) += bcm590xx-regulator.o +obj-$(CONFIG_REGULATOR_BD71837) += bd71837-regulator.o obj-$(CONFIG_REGULATOR_BD9571MWV) += bd9571mwv-regulator.o obj-$(CONFIG_REGULATOR_DA903X) += da903x.o obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o diff --git a/drivers/regulator/bd71837-regulator.c b/drivers/regulator/bd71837-regulator.c new file mode 100644 index 000000000000..6eae4d0432a2 --- /dev/null +++ b/drivers/regulator/bd71837-regulator.c @@ -0,0 +1,640 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (C) 2018 ROHM Semiconductors +// bd71837-regulator.c ROHM BD71837MWV regulator driver + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct bd71837_pmic { + struct regulator_desc descs[BD71837_REGULATOR_CNT]; + struct bd71837 *mfd; + struct platform_device *pdev; + struct regulator_dev *rdev[BD71837_REGULATOR_CNT]; +}; + +/* + * BUCK1/2/3/4 + * BUCK1RAMPRATE[1:0] BUCK1 DVS ramp rate setting + * 00: 10.00mV/usec 10mV 1uS + * 01: 5.00mV/usec 10mV 2uS + * 10: 2.50mV/usec 10mV 4uS + * 11: 1.25mV/usec 10mV 8uS + */ +static int bd71837_buck1234_set_ramp_delay(struct regulator_dev *rdev, + int ramp_delay) +{ + struct bd71837_pmic *pmic = rdev_get_drvdata(rdev); + struct bd71837 *mfd = pmic->mfd; + int id = rdev->desc->id; + unsigned int ramp_value = BUCK_RAMPRATE_10P00MV; + + dev_dbg(&(pmic->pdev->dev), "Buck[%d] Set Ramp = %d\n", id + 1, + ramp_delay); + switch (ramp_delay) { + case 1 ... 1250: + ramp_value = BUCK_RAMPRATE_1P25MV; + break; + case 1251 ... 2500: + ramp_value = BUCK_RAMPRATE_2P50MV; + break; + case 2501 ... 5000: + ramp_value = BUCK_RAMPRATE_5P00MV; + break; + case 5001 ... 10000: + ramp_value = BUCK_RAMPRATE_10P00MV; + break; + default: + ramp_value = BUCK_RAMPRATE_10P00MV; + dev_err(&pmic->pdev->dev, + "%s: ramp_delay: %d not supported, setting 10000mV//us\n", + rdev->desc->name, ramp_delay); + } + + return regmap_update_bits(mfd->regmap, BD71837_REG_BUCK1_CTRL + id, + BUCK_RAMPRATE_MASK, ramp_value << 6); +} + +/* Bucks 1 to 4 support DVS. PWM mode is used when voltage is changed. + * Bucks 5 to 8 and LDOs can use PFM and must be disabled when voltage + * is changed. Hence we return -EBUSY for these if voltage is changed + * when BUCK/LDO is enabled. + */ +static int bd71837_set_voltage_sel_restricted(struct regulator_dev *rdev, + unsigned int sel) +{ + int ret; + + ret = regulator_is_enabled_regmap(rdev); + if (!ret) + ret = regulator_set_voltage_sel_regmap(rdev, sel); + else if (ret == 1) + ret = -EBUSY; + return ret; +} + +static struct regulator_ops bd71837_ldo_regulator_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear_range, + .set_voltage_sel = bd71837_set_voltage_sel_restricted, + .get_voltage_sel = regulator_get_voltage_sel_regmap, +}; + +static struct regulator_ops bd71837_ldo_regulator_nolinear_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_table, + .set_voltage_sel = bd71837_set_voltage_sel_restricted, + .get_voltage_sel = regulator_get_voltage_sel_regmap, +}; + +static struct regulator_ops bd71837_buck_regulator_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear_range, + .set_voltage_sel = bd71837_set_voltage_sel_restricted, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, +}; + +static struct regulator_ops bd71837_buck_regulator_nolinear_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_table, + .set_voltage_sel = bd71837_set_voltage_sel_restricted, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, +}; + +static struct regulator_ops bd71837_buck1234_regulator_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear_range, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .set_ramp_delay = bd71837_buck1234_set_ramp_delay, +}; + +/* + * BUCK1/2/3/4 + * 0.70 to 1.30V (10mV step) + */ +static const struct regulator_linear_range bd71837_buck1234_voltage_ranges[] = { + REGULATOR_LINEAR_RANGE(700000, 0x00, 0x3C, 10000), + REGULATOR_LINEAR_RANGE(1300000, 0x3D, 0x3F, 0), +}; + +/* + * BUCK5 + * 0.9V to 1.35V () + */ +static const struct regulator_linear_range bd71837_buck5_voltage_ranges[] = { + REGULATOR_LINEAR_RANGE(700000, 0x00, 0x03, 100000), + REGULATOR_LINEAR_RANGE(1050000, 0x04, 0x05, 50000), + REGULATOR_LINEAR_RANGE(1200000, 0x06, 0x07, 150000), +}; + +/* + * BUCK6 + * 3.0V to 3.3V (step 100mV) + */ +static const struct regulator_linear_range bd71837_buck6_voltage_ranges[] = { + REGULATOR_LINEAR_RANGE(3000000, 0x00, 0x03, 100000), +}; + +/* + * BUCK7 + * 000 = 1.605V + * 001 = 1.695V + * 010 = 1.755V + * 011 = 1.8V (Initial) + * 100 = 1.845V + * 101 = 1.905V + * 110 = 1.95V + * 111 = 1.995V + */ +static const unsigned int buck_7_volts[] = { + 1605000, 1695000, 1755000, 1800000, 1845000, 1905000, 1950000, 1995000 +}; + +/* + * BUCK8 + * 0.8V to 1.40V (step 10mV) + */ +static const struct regulator_linear_range bd71837_buck8_voltage_ranges[] = { + REGULATOR_LINEAR_RANGE(800000, 0x00, 0x3C, 10000), + REGULATOR_LINEAR_RANGE(1400000, 0x3D, 0x3F, 0), +}; + +/* + * LDO1 + * 3.0 to 3.3V (100mV step) + */ +static const struct regulator_linear_range bd71837_ldo1_voltage_ranges[] = { + REGULATOR_LINEAR_RANGE(3000000, 0x00, 0x03, 100000), +}; + +/* + * LDO2 + * 0.8 or 0.9V + */ +const unsigned int ldo_2_volts[] = { + 900000, 800000 +}; + +/* + * LDO3 + * 1.8 to 3.3V (100mV step) + */ +static const struct regulator_linear_range bd71837_ldo3_voltage_ranges[] = { + REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000), +}; + +/* + * LDO4 + * 0.9 to 1.8V (100mV step) + */ +static const struct regulator_linear_range bd71837_ldo4_voltage_ranges[] = { + REGULATOR_LINEAR_RANGE(900000, 0x00, 0x09, 100000), + REGULATOR_LINEAR_RANGE(1800000, 0x0A, 0x0F, 0), +}; + +/* + * LDO5 + * 1.8 to 3.3V (100mV step) + */ +static const struct regulator_linear_range bd71837_ldo5_voltage_ranges[] = { + REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000), +}; + +/* + * LDO6 + * 0.9 to 1.8V (100mV step) + */ +static const struct regulator_linear_range bd71837_ldo6_voltage_ranges[] = { + REGULATOR_LINEAR_RANGE(900000, 0x00, 0x09, 100000), + REGULATOR_LINEAR_RANGE(1800000, 0x0A, 0x0F, 0), +}; + +/* + * LDO7 + * 1.8 to 3.3V (100mV step) + */ +static const struct regulator_linear_range bd71837_ldo7_voltage_ranges[] = { + REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000), +}; + +static const struct regulator_desc bd71837_regulators[] = { + { + .name = "buck1", + .of_match = of_match_ptr("BUCK1"), + .regulators_node = of_match_ptr("regulators"), + .id = BD71837_BUCK1, + .ops = &bd71837_buck1234_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = BD71837_BUCK1_VOLTAGE_NUM, + .linear_ranges = bd71837_buck1234_voltage_ranges, + .n_linear_ranges = ARRAY_SIZE(bd71837_buck1234_voltage_ranges), + .vsel_reg = BD71837_REG_BUCK1_VOLT_RUN, + .vsel_mask = BUCK1_RUN_MASK, + .enable_reg = BD71837_REG_BUCK1_CTRL, + .enable_mask = BD71837_BUCK_EN, + .owner = THIS_MODULE, + }, + { + .name = "buck2", + .of_match = of_match_ptr("BUCK2"), + .regulators_node = of_match_ptr("regulators"), + .id = BD71837_BUCK2, + .ops = &bd71837_buck1234_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = BD71837_BUCK2_VOLTAGE_NUM, + .linear_ranges = bd71837_buck1234_voltage_ranges, + .n_linear_ranges = ARRAY_SIZE(bd71837_buck1234_voltage_ranges), + .vsel_reg = BD71837_REG_BUCK2_VOLT_RUN, + .vsel_mask = BUCK2_RUN_MASK, + .enable_reg = BD71837_REG_BUCK2_CTRL, + .enable_mask = BD71837_BUCK_EN, + .owner = THIS_MODULE, + }, + { + .name = "buck3", + .of_match = of_match_ptr("BUCK3"), + .regulators_node = of_match_ptr("regulators"), + .id = BD71837_BUCK3, + .ops = &bd71837_buck1234_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = BD71837_BUCK3_VOLTAGE_NUM, + .linear_ranges = bd71837_buck1234_voltage_ranges, + .n_linear_ranges = ARRAY_SIZE(bd71837_buck1234_voltage_ranges), + .vsel_reg = BD71837_REG_BUCK3_VOLT_RUN, + .vsel_mask = BUCK3_RUN_MASK, + .enable_reg = BD71837_REG_BUCK3_CTRL, + .enable_mask = BD71837_BUCK_EN, + .owner = THIS_MODULE, + }, + { + .name = "buck4", + .of_match = of_match_ptr("BUCK4"), + .regulators_node = of_match_ptr("regulators"), + .id = BD71837_BUCK4, + .ops = &bd71837_buck1234_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = BD71837_BUCK4_VOLTAGE_NUM, + .linear_ranges = bd71837_buck1234_voltage_ranges, + .n_linear_ranges = ARRAY_SIZE(bd71837_buck1234_voltage_ranges), + .vsel_reg = BD71837_REG_BUCK4_VOLT_RUN, + .vsel_mask = BUCK4_RUN_MASK, + .enable_reg = BD71837_REG_BUCK4_CTRL, + .enable_mask = BD71837_BUCK_EN, + .owner = THIS_MODULE, + }, + { + .name = "buck5", + .of_match = of_match_ptr("BUCK5"), + .regulators_node = of_match_ptr("regulators"), + .id = BD71837_BUCK5, + .ops = &bd71837_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = BD71837_BUCK5_VOLTAGE_NUM, + .linear_ranges = bd71837_buck5_voltage_ranges, + .n_linear_ranges = ARRAY_SIZE(bd71837_buck5_voltage_ranges), + .vsel_reg = BD71837_REG_BUCK5_VOLT, + .vsel_mask = BUCK5_MASK, + .enable_reg = BD71837_REG_BUCK5_CTRL, + .enable_mask = BD71837_BUCK_EN, + .owner = THIS_MODULE, + }, + { + .name = "buck6", + .of_match = of_match_ptr("BUCK6"), + .regulators_node = of_match_ptr("regulators"), + .id = BD71837_BUCK6, + .ops = &bd71837_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = BD71837_BUCK6_VOLTAGE_NUM, + .linear_ranges = bd71837_buck6_voltage_ranges, + .n_linear_ranges = ARRAY_SIZE(bd71837_buck6_voltage_ranges), + .vsel_reg = BD71837_REG_BUCK6_VOLT, + .vsel_mask = BUCK6_MASK, + .enable_reg = BD71837_REG_BUCK6_CTRL, + .enable_mask = BD71837_BUCK_EN, + .owner = THIS_MODULE, + }, + { + .name = "buck7", + .of_match = of_match_ptr("BUCK7"), + .regulators_node = of_match_ptr("regulators"), + .id = BD71837_BUCK7, + .ops = &bd71837_buck_regulator_nolinear_ops, + .type = REGULATOR_VOLTAGE, + .volt_table = &buck_7_volts[0], + .n_voltages = ARRAY_SIZE(buck_7_volts), + .vsel_reg = BD71837_REG_BUCK7_VOLT, + .vsel_mask = BUCK7_MASK, + .enable_reg = BD71837_REG_BUCK7_CTRL, + .enable_mask = BD71837_BUCK_EN, + .owner = THIS_MODULE, + }, + { + .name = "buck8", + .of_match = of_match_ptr("BUCK8"), + .regulators_node = of_match_ptr("regulators"), + .id = BD71837_BUCK8, + .ops = &bd71837_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = BD71837_BUCK8_VOLTAGE_NUM, + .linear_ranges = bd71837_buck8_voltage_ranges, + .n_linear_ranges = ARRAY_SIZE(bd71837_buck8_voltage_ranges), + .vsel_reg = BD71837_REG_BUCK8_VOLT, + .vsel_mask = BUCK8_MASK, + .enable_reg = BD71837_REG_BUCK8_CTRL, + .enable_mask = BD71837_BUCK_EN, + .owner = THIS_MODULE, + }, + { + .name = "ldo1", + .of_match = of_match_ptr("LDO1"), + .regulators_node = of_match_ptr("regulators"), + .id = BD71837_LDO1, + .ops = &bd71837_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = BD71837_LDO1_VOLTAGE_NUM, + .linear_ranges = bd71837_ldo1_voltage_ranges, + .n_linear_ranges = ARRAY_SIZE(bd71837_ldo1_voltage_ranges), + .vsel_reg = BD71837_REG_LDO1_VOLT, + .vsel_mask = LDO1_MASK, + .enable_reg = BD71837_REG_LDO1_VOLT, + .enable_mask = BD71837_LDO_EN, + .owner = THIS_MODULE, + }, + { + .name = "ldo2", + .of_match = of_match_ptr("LDO2"), + .regulators_node = of_match_ptr("regulators"), + .id = BD71837_LDO2, + .ops = &bd71837_ldo_regulator_nolinear_ops, + .type = REGULATOR_VOLTAGE, + .volt_table = &ldo_2_volts[0], + .vsel_reg = BD71837_REG_LDO2_VOLT, + .vsel_mask = LDO2_MASK, + .n_voltages = ARRAY_SIZE(ldo_2_volts), + .n_voltages = BD71837_LDO2_VOLTAGE_NUM, + .enable_reg = BD71837_REG_LDO2_VOLT, + .enable_mask = BD71837_LDO_EN, + .owner = THIS_MODULE, + }, + { + .name = "ldo3", + .of_match = of_match_ptr("LDO3"), + .regulators_node = of_match_ptr("regulators"), + .id = BD71837_LDO3, + .ops = &bd71837_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = BD71837_LDO3_VOLTAGE_NUM, + .linear_ranges = bd71837_ldo3_voltage_ranges, + .n_linear_ranges = ARRAY_SIZE(bd71837_ldo3_voltage_ranges), + .vsel_reg = BD71837_REG_LDO3_VOLT, + .vsel_mask = LDO3_MASK, + .enable_reg = BD71837_REG_LDO3_VOLT, + .enable_mask = BD71837_LDO_EN, + .owner = THIS_MODULE, + }, + { + .name = "ldo4", + .of_match = of_match_ptr("LDO4"), + .regulators_node = of_match_ptr("regulators"), + .id = BD71837_LDO4, + .ops = &bd71837_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = BD71837_LDO4_VOLTAGE_NUM, + .linear_ranges = bd71837_ldo4_voltage_ranges, + .n_linear_ranges = ARRAY_SIZE(bd71837_ldo4_voltage_ranges), + .vsel_reg = BD71837_REG_LDO4_VOLT, + .vsel_mask = LDO4_MASK, + .enable_reg = BD71837_REG_LDO4_VOLT, + .enable_mask = BD71837_LDO_EN, + .owner = THIS_MODULE, + }, + { + .name = "ldo5", + .of_match = of_match_ptr("LDO5"), + .regulators_node = of_match_ptr("regulators"), + .id = BD71837_LDO5, + .ops = &bd71837_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = BD71837_LDO5_VOLTAGE_NUM, + .linear_ranges = bd71837_ldo5_voltage_ranges, + .n_linear_ranges = ARRAY_SIZE(bd71837_ldo5_voltage_ranges), + /* LDO5 is supplied by buck6 */ + .supply_name = "buck6", + .vsel_reg = BD71837_REG_LDO5_VOLT, + .vsel_mask = LDO5_MASK, + .enable_reg = BD71837_REG_LDO5_VOLT, + .enable_mask = BD71837_LDO_EN, + .owner = THIS_MODULE, + }, + { + .name = "ldo6", + .of_match = of_match_ptr("LDO6"), + .regulators_node = of_match_ptr("regulators"), + .id = BD71837_LDO6, + .ops = &bd71837_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = BD71837_LDO6_VOLTAGE_NUM, + .linear_ranges = bd71837_ldo6_voltage_ranges, + .n_linear_ranges = ARRAY_SIZE(bd71837_ldo6_voltage_ranges), + /* LDO6 is supplied by buck7 */ + .supply_name = "buck7", + .vsel_reg = BD71837_REG_LDO6_VOLT, + .vsel_mask = LDO6_MASK, + .enable_reg = BD71837_REG_LDO6_VOLT, + .enable_mask = BD71837_LDO_EN, + .owner = THIS_MODULE, + }, + { + .name = "ldo7", + .of_match = of_match_ptr("LDO7"), + .regulators_node = of_match_ptr("regulators"), + .id = BD71837_LDO7, + .ops = &bd71837_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = BD71837_LDO7_VOLTAGE_NUM, + .linear_ranges = bd71837_ldo7_voltage_ranges, + .n_linear_ranges = ARRAY_SIZE(bd71837_ldo7_voltage_ranges), + .vsel_reg = BD71837_REG_LDO7_VOLT, + .vsel_mask = LDO7_MASK, + .enable_reg = BD71837_REG_LDO7_VOLT, + .enable_mask = BD71837_LDO_EN, + .owner = THIS_MODULE, + }, +}; + +struct reg_init { + unsigned int reg; + unsigned int mask; +}; + +static int bd71837_probe(struct platform_device *pdev) +{ + struct bd71837_pmic *pmic; + struct bd71837_board *pdata; + struct regulator_config config = { 0 }; + struct reg_init pmic_regulator_inits[] = { + { + .reg = BD71837_REG_BUCK1_CTRL, + .mask = BD71837_BUCK_SEL, + }, { + .reg = BD71837_REG_BUCK2_CTRL, + .mask = BD71837_BUCK_SEL, + }, { + .reg = BD71837_REG_BUCK3_CTRL, + .mask = BD71837_BUCK_SEL, + }, { + .reg = BD71837_REG_BUCK4_CTRL, + .mask = BD71837_BUCK_SEL, + }, { + .reg = BD71837_REG_BUCK5_CTRL, + .mask = BD71837_BUCK_SEL, + }, { + .reg = BD71837_REG_BUCK6_CTRL, + .mask = BD71837_BUCK_SEL, + }, { + .reg = BD71837_REG_BUCK7_CTRL, + .mask = BD71837_BUCK_SEL, + }, { + .reg = BD71837_REG_BUCK8_CTRL, + .mask = BD71837_BUCK_SEL, + }, { + .reg = BD71837_REG_LDO1_VOLT, + .mask = BD71837_LDO_SEL, + }, { + .reg = BD71837_REG_LDO2_VOLT, + .mask = BD71837_LDO_SEL, + }, { + .reg = BD71837_REG_LDO3_VOLT, + .mask = BD71837_LDO_SEL, + }, { + .reg = BD71837_REG_LDO4_VOLT, + .mask = BD71837_LDO_SEL, + }, { + .reg = BD71837_REG_LDO5_VOLT, + .mask = BD71837_LDO_SEL, + }, { + .reg = BD71837_REG_LDO6_VOLT, + .mask = BD71837_LDO_SEL, + }, { + .reg = BD71837_REG_LDO7_VOLT, + .mask = BD71837_LDO_SEL, + } + }; + + int i, err; + + pmic = devm_kzalloc(&pdev->dev, sizeof(struct bd71837_pmic), + GFP_KERNEL); + if (!pmic) + return -ENOMEM; + + memcpy(pmic->descs, bd71837_regulators, sizeof(pmic->descs)); + + pmic->pdev = pdev; + pmic->mfd = dev_get_drvdata(pdev->dev.parent); + + if (!pmic->mfd) { + dev_err(&pdev->dev, "No MFD driver data\n"); + err = -EINVAL; + goto err; + } + platform_set_drvdata(pdev, pmic); + pdata = dev_get_platdata(pmic->mfd->dev); + + /* Register LOCK release */ + err = regmap_update_bits(pmic->mfd->regmap, BD71837_REG_REGLOCK, + (REGLOCK_PWRSEQ | REGLOCK_VREG), 0); + if (err) { + dev_err(&pmic->pdev->dev, "Failed to unlock PMIC (%d)\n", err); + goto err; + } else { + dev_dbg(&pmic->pdev->dev, "%s: Unlocked lock register 0x%x\n", + __func__, BD71837_REG_REGLOCK); + } + + for (i = 0; i < ARRAY_SIZE(pmic_regulator_inits); i++) { + + struct regulator_desc *desc; + struct regulator_dev *rdev; + + desc = &pmic->descs[i]; + + if (pdata) + config.init_data = pdata->init_data[i]; + + config.dev = pdev->dev.parent; + config.driver_data = pmic; + config.regmap = pmic->mfd->regmap; + + rdev = devm_regulator_register(&pdev->dev, desc, &config); + if (IS_ERR(rdev)) { + dev_err(pmic->mfd->dev, + "failed to register %s regulator\n", + desc->name); + err = PTR_ERR(rdev); + goto err; + } + /* Regulator register gets the regulator constraints and + * applies them (set_machine_constraints). This should have + * turned the control register(s) to correct values and we + * can now switch the control from PMIC state machine to the + * register interface + */ + err = regmap_update_bits(pmic->mfd->regmap, + pmic_regulator_inits[i].reg, + pmic_regulator_inits[i].mask, + 0xFFFFFFFF); + if (err) { + dev_err(&pmic->pdev->dev, + "Failed to write BUCK/LDO SEL bit for (%s)\n", + desc->name); + goto err; + } + + pmic->rdev[i] = rdev; + } + + return 0; + +err: + return err; +} + +static struct platform_driver bd71837_regulator = { + .driver = { + .name = "bd71837-pmic", + .owner = THIS_MODULE, + }, + .probe = bd71837_probe, +}; + +module_platform_driver(bd71837_regulator); + +MODULE_AUTHOR("Matti Vaittinen "); +MODULE_DESCRIPTION("BD71837 voltage regulator driver"); +MODULE_LICENSE("GPL"); -- 2.14.3