From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id A4F4BC61D97 for ; Sun, 29 Jan 2023 01:34:57 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230482AbjA2Ben (ORCPT ); Sat, 28 Jan 2023 20:34:43 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:46052 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230452AbjA2Bed (ORCPT ); Sat, 28 Jan 2023 20:34:33 -0500 Received: from mail-wm1-x335.google.com (mail-wm1-x335.google.com [IPv6:2a00:1450:4864:20::335]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id B029A1C33E; Sat, 28 Jan 2023 17:34:21 -0800 (PST) Received: by mail-wm1-x335.google.com with SMTP id q8so5852646wmo.5; Sat, 28 Jan 2023 17:34:21 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=C997OhrnhNoiM7iywusJdgGkUWnaX2vRvWZPHFED/VQ=; b=JdSMzdYt2ajzvF0+AUl0KDbviuu+Sv/YNk1l4+OstVtNuD/QzNFRT5OZTHN/4lGEsR mqZVgAZG8bfjw7UBezuYGhW4IRKwu3OO97ISqJbQBnav5svjrFNWN+tPPvKndUGY1PhN oBcRQ3JB5cDtRyi57VrLeiUvQU+knYGALeewW1mjjTepNoLuRh3dkXnodJJuy+wBuGiK Wq9TxoTXlg9SRd5j30bQNsdhY40jw4iyPlPc9p8Jmcgv0UaQKWcgv5xc4ouWBsUVLMtD 4K0grrvM75WRr6m91uX8Q1i5MNSoVQFzRzExTw6Vg1I13cr8Z9nKeNX3k7xXxLC7GDpa fk0Q== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=C997OhrnhNoiM7iywusJdgGkUWnaX2vRvWZPHFED/VQ=; b=3zU6PTpQ4O96o2sNHmvLLZMO5zUDzyuw48yCB0GwHz3oS2k0o2iXD6s2LVJ6Wv5mQW tPHjvID35Ut3cKdZThqVLZVdJbiPWASbr7UHUgEfue06DDIwNLjSw5CtGcV944LZ4wOy 9L8rQ4T7I+v4PMyL4t7bnjqGV8OaeOSzzEfgcVzUT7C5362NUPci2W0hlqD9aiUqGZ46 vxNcL6nU40ZW+JcqzKTg0dNAvWd29jUvm82EehAmD9NOFBf67lwP6JU3pI7usO5N/aFX xNKc6BweTYKac6hPBlDX0yGYTlXLJmWXG4ALbuTb31pz3G7sLipQEntkE5Yo5rXz2SL0 Wn+Q== X-Gm-Message-State: AFqh2kpJn/4s+b4DUj5YQ8cJBZAy1pM+dOGHkT/sPtonopju8NUZ6iDv VJwei9On2g1YYwzHrANgrK7p7mD0TAk= X-Google-Smtp-Source: AMrXdXvD+aJC0ZcCaTAu1q9Kr4VS/4xsJ+B1CIrqBCBVXPK2dTTuBW/pCqovB4Ttfd2xMc4xSLiMtA== X-Received: by 2002:a1c:7504:0:b0:3d3:52bb:3984 with SMTP id o4-20020a1c7504000000b003d352bb3984mr41561526wmc.17.1674956060015; Sat, 28 Jan 2023 17:34:20 -0800 (PST) Received: from localhost.localdomain (143.red-83-35-57.dynamicip.rima-tde.net. [83.35.57.143]) by smtp.gmail.com with ESMTPSA id r7-20020a05600c434700b003dc3f195abesm5197132wme.39.2023.01.28.17.34.19 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sat, 28 Jan 2023 17:34:19 -0800 (PST) From: Angel Iglesias To: linux-iio@vger.kernel.org Cc: Angel Iglesias , Andy Shevchenko , Jonathan Cameron , Lars-Peter Clausen , Rob Herring , Krzysztof Kozlowski , Andreas Klinger , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v3 1/7] iio: pressure: bmp280: Use chip_info pointers for each chip as driver data Date: Sun, 29 Jan 2023 02:33:03 +0100 Message-Id: <7392796d1bc63d58f7a19d209a86c8e0de84a763.1674954271.git.ang.iglesiasg@gmail.com> X-Mailer: git-send-email 2.39.1 In-Reply-To: References: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Refactor driver I2C and SPI implementations using pointers for each variant's chip_info as the driver data. Adds the regmap configuration to the chip_info struct. Suggested-by: Andy Shevchenko Suggested-by: Jonathan Cameron Signed-off-by: Angel Iglesias diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c index c0aff78489b4..2c8773db4b73 100644 --- a/drivers/iio/pressure/bmp280-core.c +++ b/drivers/iio/pressure/bmp280-core.c @@ -49,65 +49,6 @@ */ enum { AC1, AC2, AC3, AC4, AC5, AC6, B1, B2, MB, MC, MD }; -struct bmp180_calib { - s16 AC1; - s16 AC2; - s16 AC3; - u16 AC4; - u16 AC5; - u16 AC6; - s16 B1; - s16 B2; - s16 MB; - s16 MC; - s16 MD; -}; - -/* See datasheet Section 4.2.2. */ -struct bmp280_calib { - u16 T1; - s16 T2; - s16 T3; - u16 P1; - s16 P2; - s16 P3; - s16 P4; - s16 P5; - s16 P6; - s16 P7; - s16 P8; - s16 P9; - u8 H1; - s16 H2; - u8 H3; - s16 H4; - s16 H5; - s8 H6; -}; - -/* See datasheet Section 3.11.1. */ -struct bmp380_calib { - u16 T1; - u16 T2; - s8 T3; - s16 P1; - s16 P2; - s8 P3; - s8 P4; - u16 P5; - u16 P6; - s8 P7; - s8 P8; - s16 P9; - s8 P10; - s8 P11; -}; - -static const char *const bmp280_supply_names[] = { - "vddd", "vdda" -}; - -#define BMP280_NUM_SUPPLIES ARRAY_SIZE(bmp280_supply_names) enum bmp380_odr { BMP380_ODR_200HZ, @@ -130,94 +71,6 @@ enum bmp380_odr { BMP380_ODR_0_0015HZ, }; -struct bmp280_data { - struct device *dev; - struct mutex lock; - struct regmap *regmap; - struct completion done; - bool use_eoc; - const struct bmp280_chip_info *chip_info; - union { - struct bmp180_calib bmp180; - struct bmp280_calib bmp280; - struct bmp380_calib bmp380; - } calib; - struct regulator_bulk_data supplies[BMP280_NUM_SUPPLIES]; - unsigned int start_up_time; /* in microseconds */ - - /* log of base 2 of oversampling rate */ - u8 oversampling_press; - u8 oversampling_temp; - u8 oversampling_humid; - u8 iir_filter_coeff; - - /* - * BMP380 devices introduce sampling frequency configuration. See - * datasheet sections 3.3.3. and 4.3.19 for more details. - * - * BMx280 devices allowed indirect configuration of sampling frequency - * changing the t_standby duration between measurements, as detailed on - * section 3.6.3 of the datasheet. - */ - int sampling_freq; - - /* - * Carryover value from temperature conversion, used in pressure - * calculation. - */ - s32 t_fine; - - /* - * DMA (thus cache coherency maintenance) may require the - * transfer buffers to live in their own cache lines. - */ - union { - /* Sensor data buffer */ - u8 buf[3]; - /* Calibration data buffers */ - __le16 bmp280_cal_buf[BMP280_CONTIGUOUS_CALIB_REGS / 2]; - __be16 bmp180_cal_buf[BMP180_REG_CALIB_COUNT / 2]; - u8 bmp380_cal_buf[BMP380_CALIB_REG_COUNT]; - /* Miscellaneous, endianess-aware data buffers */ - __le16 le16; - __be16 be16; - } __aligned(IIO_DMA_MINALIGN); -}; - -struct bmp280_chip_info { - unsigned int id_reg; - - const struct iio_chan_spec *channels; - int num_channels; - unsigned int start_up_time; - - const int *oversampling_temp_avail; - int num_oversampling_temp_avail; - int oversampling_temp_default; - - const int *oversampling_press_avail; - int num_oversampling_press_avail; - int oversampling_press_default; - - const int *oversampling_humid_avail; - int num_oversampling_humid_avail; - int oversampling_humid_default; - - const int *iir_filter_coeffs_avail; - int num_iir_filter_coeffs_avail; - int iir_filter_coeff_default; - - const int (*sampling_freq_avail)[2]; - int num_sampling_freq_avail; - int sampling_freq_default; - - int (*chip_config)(struct bmp280_data *); - int (*read_temp)(struct bmp280_data *, int *); - int (*read_press)(struct bmp280_data *, int *, int *); - int (*read_humid)(struct bmp280_data *, int *, int *); - int (*read_calib)(struct bmp280_data *); -}; - /* * These enums are used for indexing into the array of compensation * parameters for BMP280. @@ -905,8 +758,10 @@ static int bmp280_chip_config(struct bmp280_data *data) static const int bmp280_oversampling_avail[] = { 1, 2, 4, 8, 16 }; -static const struct bmp280_chip_info bmp280_chip_info = { +const struct bmp280_chip_info bmp280_chip_info = { .id_reg = BMP280_REG_ID, + .chip_id = BMP280_CHIP_ID, + .regmap_config = &bmp280_regmap_config, .start_up_time = 2000, .channels = bmp280_channels, .num_channels = 2, @@ -934,6 +789,7 @@ static const struct bmp280_chip_info bmp280_chip_info = { .read_press = bmp280_read_press, .read_calib = bmp280_read_calib, }; +EXPORT_SYMBOL_NS(bmp280_chip_info, IIO_BMP280); static int bme280_chip_config(struct bmp280_data *data) { @@ -953,8 +809,10 @@ static int bme280_chip_config(struct bmp280_data *data) return bmp280_chip_config(data); } -static const struct bmp280_chip_info bme280_chip_info = { +const struct bmp280_chip_info bme280_chip_info = { .id_reg = BMP280_REG_ID, + .chip_id = BME280_CHIP_ID, + .regmap_config = &bmp280_regmap_config, .start_up_time = 2000, .channels = bmp280_channels, .num_channels = 3, @@ -977,6 +835,7 @@ static const struct bmp280_chip_info bme280_chip_info = { .read_humid = bmp280_read_humid, .read_calib = bme280_read_calib, }; +EXPORT_SYMBOL_NS(bme280_chip_info, IIO_BMP280); /* * Helper function to send a command to BMP3XX sensors. @@ -1319,8 +1178,10 @@ static int bmp380_chip_config(struct bmp280_data *data) static const int bmp380_oversampling_avail[] = { 1, 2, 4, 8, 16, 32 }; static const int bmp380_iir_filter_coeffs_avail[] = { 1, 2, 4, 8, 16, 32, 64, 128}; -static const struct bmp280_chip_info bmp380_chip_info = { +const struct bmp280_chip_info bmp380_chip_info = { .id_reg = BMP380_REG_ID, + .chip_id = BMP380_CHIP_ID, + .regmap_config = &bmp380_regmap_config, .start_up_time = 2000, .channels = bmp380_channels, .num_channels = 2, @@ -1346,6 +1207,7 @@ static const struct bmp280_chip_info bmp380_chip_info = { .read_press = bmp380_read_press, .read_calib = bmp380_read_calib, }; +EXPORT_SYMBOL_NS(bmp380_chip_info, IIO_BMP280); static int bmp180_measure(struct bmp280_data *data, u8 ctrl_meas) { @@ -1579,8 +1441,10 @@ static int bmp180_chip_config(struct bmp280_data *data) static const int bmp180_oversampling_temp_avail[] = { 1 }; static const int bmp180_oversampling_press_avail[] = { 1, 2, 4, 8 }; -static const struct bmp280_chip_info bmp180_chip_info = { +const struct bmp280_chip_info bmp180_chip_info = { .id_reg = BMP280_REG_ID, + .chip_id = BMP180_CHIP_ID, + .regmap_config = &bmp180_regmap_config, .start_up_time = 2000, .channels = bmp280_channels, .num_channels = 2, @@ -1600,6 +1464,7 @@ static const struct bmp280_chip_info bmp180_chip_info = { .read_press = bmp180_read_press, .read_calib = bmp180_read_calib, }; +EXPORT_SYMBOL_NS(bmp180_chip_info, IIO_BMP280); static irqreturn_t bmp085_eoc_irq(int irq, void *d) { @@ -1661,11 +1526,10 @@ static void bmp280_regulators_disable(void *data) int bmp280_common_probe(struct device *dev, struct regmap *regmap, - unsigned int chip, + const struct bmp280_chip_info *chip_info, const char *name, int irq) { - const struct bmp280_chip_info *chip_info; struct iio_dev *indio_dev; struct bmp280_data *data; struct gpio_desc *gpiod; @@ -1684,22 +1548,6 @@ int bmp280_common_probe(struct device *dev, indio_dev->info = &bmp280_info; indio_dev->modes = INDIO_DIRECT_MODE; - switch (chip) { - case BMP180_CHIP_ID: - chip_info = &bmp180_chip_info; - break; - case BMP280_CHIP_ID: - chip_info = &bmp280_chip_info; - break; - case BME280_CHIP_ID: - chip_info = &bme280_chip_info; - break; - case BMP380_CHIP_ID: - chip_info = &bmp380_chip_info; - break; - default: - return -EINVAL; - } data->chip_info = chip_info; /* Apply initial values from chip info structure */ @@ -1751,9 +1599,9 @@ int bmp280_common_probe(struct device *dev, ret = regmap_read(regmap, data->chip_info->id_reg, &chip_id); if (ret < 0) return ret; - if (chip_id != chip) { + if (chip_id != data->chip_info->chip_id) { dev_err(dev, "bad chip id: expected %x got %x\n", - chip, chip_id); + data->chip_info->chip_id, chip_id); return -EINVAL; } diff --git a/drivers/iio/pressure/bmp280-i2c.c b/drivers/iio/pressure/bmp280-i2c.c index 14eab086d24a..5f908e2c9826 100644 --- a/drivers/iio/pressure/bmp280-i2c.c +++ b/drivers/iio/pressure/bmp280-i2c.c @@ -8,25 +8,14 @@ static int bmp280_i2c_probe(struct i2c_client *client) { struct regmap *regmap; - const struct regmap_config *regmap_config; + const struct bmp280_chip_info *chip_info; const struct i2c_device_id *id = i2c_client_get_device_id(client); - switch (id->driver_data) { - case BMP180_CHIP_ID: - regmap_config = &bmp180_regmap_config; - break; - case BMP280_CHIP_ID: - case BME280_CHIP_ID: - regmap_config = &bmp280_regmap_config; - break; - case BMP380_CHIP_ID: - regmap_config = &bmp380_regmap_config; - break; - default: - return -EINVAL; - } + chip_info = device_get_match_data(&client->dev); + if (!chip_info) + chip_info = (const struct bmp280_chip_info *) id->driver_data; - regmap = devm_regmap_init_i2c(client, regmap_config); + regmap = devm_regmap_init_i2c(client, chip_info->regmap_config); if (IS_ERR(regmap)) { dev_err(&client->dev, "failed to allocate register map\n"); return PTR_ERR(regmap); @@ -34,27 +23,27 @@ static int bmp280_i2c_probe(struct i2c_client *client) return bmp280_common_probe(&client->dev, regmap, - id->driver_data, + chip_info, id->name, client->irq); } static const struct of_device_id bmp280_of_i2c_match[] = { - { .compatible = "bosch,bmp085", .data = (void *)BMP180_CHIP_ID }, - { .compatible = "bosch,bmp180", .data = (void *)BMP180_CHIP_ID }, - { .compatible = "bosch,bmp280", .data = (void *)BMP280_CHIP_ID }, - { .compatible = "bosch,bme280", .data = (void *)BME280_CHIP_ID }, - { .compatible = "bosch,bmp380", .data = (void *)BMP380_CHIP_ID }, + { .compatible = "bosch,bmp085", .data = &bmp180_chip_info }, + { .compatible = "bosch,bmp180", .data = &bmp180_chip_info }, + { .compatible = "bosch,bmp280", .data = &bmp280_chip_info }, + { .compatible = "bosch,bme280", .data = &bme280_chip_info }, + { .compatible = "bosch,bmp380", .data = &bmp380_chip_info }, { }, }; MODULE_DEVICE_TABLE(of, bmp280_of_i2c_match); static const struct i2c_device_id bmp280_i2c_id[] = { - {"bmp085", BMP180_CHIP_ID }, - {"bmp180", BMP180_CHIP_ID }, - {"bmp280", BMP280_CHIP_ID }, - {"bme280", BME280_CHIP_ID }, - {"bmp380", BMP380_CHIP_ID }, + {"bmp085", (kernel_ulong_t)&bmp180_chip_info }, + {"bmp180", (kernel_ulong_t)&bmp180_chip_info }, + {"bmp280", (kernel_ulong_t)&bmp280_chip_info }, + {"bme280", (kernel_ulong_t)&bme280_chip_info }, + {"bmp380", (kernel_ulong_t)&bmp380_chip_info }, { }, }; MODULE_DEVICE_TABLE(i2c, bmp280_i2c_id); diff --git a/drivers/iio/pressure/bmp280-spi.c b/drivers/iio/pressure/bmp280-spi.c index 011c68e07ebf..d5a224b95185 100644 --- a/drivers/iio/pressure/bmp280-spi.c +++ b/drivers/iio/pressure/bmp280-spi.c @@ -47,8 +47,8 @@ static struct regmap_bus bmp280_regmap_bus = { static int bmp280_spi_probe(struct spi_device *spi) { const struct spi_device_id *id = spi_get_device_id(spi); + const struct bmp280_chip_info *chip_info; struct regmap *regmap; - const struct regmap_config *regmap_config; int ret; spi->bits_per_word = 8; @@ -58,25 +58,14 @@ static int bmp280_spi_probe(struct spi_device *spi) return ret; } - switch (id->driver_data) { - case BMP180_CHIP_ID: - regmap_config = &bmp180_regmap_config; - break; - case BMP280_CHIP_ID: - case BME280_CHIP_ID: - regmap_config = &bmp280_regmap_config; - break; - case BMP380_CHIP_ID: - regmap_config = &bmp380_regmap_config; - break; - default: - return -EINVAL; - } + chip_info = device_get_match_data(&spi->dev); + if (!chip_info) + chip_info = (const struct bmp280_chip_info *) id->driver_data; regmap = devm_regmap_init(&spi->dev, &bmp280_regmap_bus, &spi->dev, - regmap_config); + chip_info->regmap_config); if (IS_ERR(regmap)) { dev_err(&spi->dev, "failed to allocate register map\n"); return PTR_ERR(regmap); @@ -84,28 +73,28 @@ static int bmp280_spi_probe(struct spi_device *spi) return bmp280_common_probe(&spi->dev, regmap, - id->driver_data, + chip_info, id->name, spi->irq); } static const struct of_device_id bmp280_of_spi_match[] = { - { .compatible = "bosch,bmp085", }, - { .compatible = "bosch,bmp180", }, - { .compatible = "bosch,bmp181", }, - { .compatible = "bosch,bmp280", }, - { .compatible = "bosch,bme280", }, - { .compatible = "bosch,bmp380", }, + { .compatible = "bosch,bmp085", .data = &bmp180_chip_info }, + { .compatible = "bosch,bmp180", .data = &bmp180_chip_info }, + { .compatible = "bosch,bmp181", .data = &bmp180_chip_info }, + { .compatible = "bosch,bmp280", .data = &bmp280_chip_info }, + { .compatible = "bosch,bme280", .data = &bmp280_chip_info }, + { .compatible = "bosch,bmp380", .data = &bmp380_chip_info }, { }, }; MODULE_DEVICE_TABLE(of, bmp280_of_spi_match); static const struct spi_device_id bmp280_spi_id[] = { - { "bmp180", BMP180_CHIP_ID }, - { "bmp181", BMP180_CHIP_ID }, - { "bmp280", BMP280_CHIP_ID }, - { "bme280", BME280_CHIP_ID }, - { "bmp380", BMP380_CHIP_ID }, + { "bmp180", (kernel_ulong_t)&bmp180_chip_info }, + { "bmp181", (kernel_ulong_t)&bmp180_chip_info }, + { "bmp280", (kernel_ulong_t)&bmp280_chip_info }, + { "bme280", (kernel_ulong_t)&bmp280_chip_info }, + { "bmp380", (kernel_ulong_t)&bmp380_chip_info }, { } }; MODULE_DEVICE_TABLE(spi, bmp280_spi_id); diff --git a/drivers/iio/pressure/bmp280.h b/drivers/iio/pressure/bmp280.h index c791325c7416..387723fd0772 100644 --- a/drivers/iio/pressure/bmp280.h +++ b/drivers/iio/pressure/bmp280.h @@ -1,7 +1,10 @@ /* SPDX-License-Identifier: GPL-2.0 */ #include #include +#include #include +#include + /* BMP380 specific registers */ #define BMP380_REG_CMD 0x7E @@ -191,6 +194,165 @@ #define BMP280_PRESS_SKIPPED 0x80000 #define BMP280_HUMIDITY_SKIPPED 0x8000 +/* Core exported structs */ + +static const char *const bmp280_supply_names[] = { + "vddd", "vdda" +}; + +#define BMP280_NUM_SUPPLIES ARRAY_SIZE(bmp280_supply_names) + +struct bmp180_calib { + s16 AC1; + s16 AC2; + s16 AC3; + u16 AC4; + u16 AC5; + u16 AC6; + s16 B1; + s16 B2; + s16 MB; + s16 MC; + s16 MD; +}; + +/* See datasheet Section 4.2.2. */ +struct bmp280_calib { + u16 T1; + s16 T2; + s16 T3; + u16 P1; + s16 P2; + s16 P3; + s16 P4; + s16 P5; + s16 P6; + s16 P7; + s16 P8; + s16 P9; + u8 H1; + s16 H2; + u8 H3; + s16 H4; + s16 H5; + s8 H6; +}; + +/* See datasheet Section 3.11.1. */ +struct bmp380_calib { + u16 T1; + u16 T2; + s8 T3; + s16 P1; + s16 P2; + s8 P3; + s8 P4; + u16 P5; + u16 P6; + s8 P7; + s8 P8; + s16 P9; + s8 P10; + s8 P11; +}; + +struct bmp280_data { + struct device *dev; + struct mutex lock; + struct regmap *regmap; + struct completion done; + bool use_eoc; + const struct bmp280_chip_info *chip_info; + union { + struct bmp180_calib bmp180; + struct bmp280_calib bmp280; + struct bmp380_calib bmp380; + } calib; + struct regulator_bulk_data supplies[BMP280_NUM_SUPPLIES]; + unsigned int start_up_time; /* in microseconds */ + + /* log of base 2 of oversampling rate */ + u8 oversampling_press; + u8 oversampling_temp; + u8 oversampling_humid; + u8 iir_filter_coeff; + + /* + * BMP380 devices introduce sampling frequency configuration. See + * datasheet sections 3.3.3. and 4.3.19 for more details. + * + * BMx280 devices allowed indirect configuration of sampling frequency + * changing the t_standby duration between measurements, as detailed on + * section 3.6.3 of the datasheet. + */ + int sampling_freq; + + /* + * Carryover value from temperature conversion, used in pressure + * calculation. + */ + s32 t_fine; + + /* + * DMA (thus cache coherency maintenance) may require the + * transfer buffers to live in their own cache lines. + */ + union { + /* Sensor data buffer */ + u8 buf[3]; + /* Calibration data buffers */ + __le16 bmp280_cal_buf[BMP280_CONTIGUOUS_CALIB_REGS / 2]; + __be16 bmp180_cal_buf[BMP180_REG_CALIB_COUNT / 2]; + u8 bmp380_cal_buf[BMP380_CALIB_REG_COUNT]; + /* Miscellaneous, endianess-aware data buffers */ + __le16 le16; + __be16 be16; + } __aligned(IIO_DMA_MINALIGN); +}; + +struct bmp280_chip_info { + unsigned int id_reg; + const unsigned int chip_id; + + const struct regmap_config *regmap_config; + + const struct iio_chan_spec *channels; + int num_channels; + unsigned int start_up_time; + + const int *oversampling_temp_avail; + int num_oversampling_temp_avail; + int oversampling_temp_default; + + const int *oversampling_press_avail; + int num_oversampling_press_avail; + int oversampling_press_default; + + const int *oversampling_humid_avail; + int num_oversampling_humid_avail; + int oversampling_humid_default; + + const int *iir_filter_coeffs_avail; + int num_iir_filter_coeffs_avail; + int iir_filter_coeff_default; + + const int (*sampling_freq_avail)[2]; + int num_sampling_freq_avail; + int sampling_freq_default; + + int (*chip_config)(struct bmp280_data *); + int (*read_temp)(struct bmp280_data *, int *); + int (*read_press)(struct bmp280_data *, int *, int *); + int (*read_humid)(struct bmp280_data *, int *, int *); + int (*read_calib)(struct bmp280_data *); +}; + +/* Chip infos for each variant */ +extern const struct bmp280_chip_info bmp180_chip_info; +extern const struct bmp280_chip_info bmp280_chip_info; +extern const struct bmp280_chip_info bme280_chip_info; +extern const struct bmp280_chip_info bmp380_chip_info; + /* Regmap configurations */ extern const struct regmap_config bmp180_regmap_config; extern const struct regmap_config bmp280_regmap_config; @@ -199,7 +361,7 @@ extern const struct regmap_config bmp380_regmap_config; /* Probe called from different transports */ int bmp280_common_probe(struct device *dev, struct regmap *regmap, - unsigned int chip, + const struct bmp280_chip_info *, const char *name, int irq); -- 2.39.1