* [PATCH v2 0/5] Add R8A77980/Condor/V3HSK LVDS/HDMI support
@ 2018-06-07 20:17 ` Sergei Shtylyov
0 siblings, 0 replies; 51+ messages in thread
From: Sergei Shtylyov @ 2018-06-07 20:17 UTC (permalink / raw)
To: Simon Horman, Rob Herring, Catalin Marinas, Will Deacon,
linux-renesas-soc, devicetree
Cc: Mark Rutland, Magnus Damm, linux-arm-kernel
Hello!
Here's the set of 5 patches against Simon Horman's 'renesas.git' repo's
'renesas-devel-20180604-v4.17' tag. We're adding the R8A77980 FCPVD/VSPD/
DU/LVDS device nodes and then describing the LVDS decoder and HDMI encoder
connected to the LVDS output. These patches depend on the Thine THC63LVD1024
driver and the R8A77980 LVDS support patch in order to work, and R8A77980 GPIO
DT patches in order to apply/compile...
[1/5] arm64: dts: renesas: r8a77980: add FCPVD support
[2/5] arm64: dts: renesas: r8a77980: add VSPD support
[3/5] arm64: dts: renesas: r8a77980: add DU support
[4/5] arm64: dts: renesas: r8a77980: add LVDS support
[5/5] arm64: dts: renesas: condor/v3hsk: add DU/LVDS/HDMI support
WBR, Sergei
^ permalink raw reply [flat|nested] 51+ messages in thread
* [PATCH v2 0/5] Add R8A77980/Condor/V3HSK LVDS/HDMI support
@ 2018-06-07 20:17 ` Sergei Shtylyov
0 siblings, 0 replies; 51+ messages in thread
From: Sergei Shtylyov @ 2018-06-07 20:17 UTC (permalink / raw)
To: Simon Horman, Rob Herring, Catalin Marinas, Will Deacon,
linux-renesas-soc, devicetree
Cc: Magnus Damm, Mark Rutland, linux-arm-kernel
Hello!
Here's the set of 5 patches against Simon Horman's 'renesas.git' repo's
'renesas-devel-20180604-v4.17' tag. We're adding the R8A77980 FCPVD/VSPD/
DU/LVDS device nodes and then describing the LVDS decoder and HDMI encoder
connected to the LVDS output. These patches depend on the Thine THC63LVD1024
driver and the R8A77980 LVDS support patch in order to work, and R8A77980 GPIO
DT patches in order to apply/compile...
[1/5] arm64: dts: renesas: r8a77980: add FCPVD support
[2/5] arm64: dts: renesas: r8a77980: add VSPD support
[3/5] arm64: dts: renesas: r8a77980: add DU support
[4/5] arm64: dts: renesas: r8a77980: add LVDS support
[5/5] arm64: dts: renesas: condor/v3hsk: add DU/LVDS/HDMI support
WBR, Sergei
^ permalink raw reply [flat|nested] 51+ messages in thread
* [PATCH v2 0/5] Add R8A77980/Condor/V3HSK LVDS/HDMI support
@ 2018-06-07 20:17 ` Sergei Shtylyov
0 siblings, 0 replies; 51+ messages in thread
From: Sergei Shtylyov @ 2018-06-07 20:17 UTC (permalink / raw)
To: linux-arm-kernel
Hello!
Here's the set of 5 patches against Simon Horman's 'renesas.git' repo's
'renesas-devel-20180604-v4.17' tag. We're adding the R8A77980 FCPVD/VSPD/
DU/LVDS device nodes and then describing the LVDS decoder and HDMI encoder
connected to the LVDS output. These patches depend on the Thine THC63LVD1024
driver and the R8A77980 LVDS support patch in order to work, and R8A77980 GPIO
DT patches in order to apply/compile...
[1/5] arm64: dts: renesas: r8a77980: add FCPVD support
[2/5] arm64: dts: renesas: r8a77980: add VSPD support
[3/5] arm64: dts: renesas: r8a77980: add DU support
[4/5] arm64: dts: renesas: r8a77980: add LVDS support
[5/5] arm64: dts: renesas: condor/v3hsk: add DU/LVDS/HDMI support
WBR, Sergei
^ permalink raw reply [flat|nested] 51+ messages in thread
* [PATCH v2 1/5] arm64: dts: renesas: r8a77980: add FCPVD support
2018-06-07 20:17 ` Sergei Shtylyov
(?)
@ 2018-06-07 20:19 ` Sergei Shtylyov
-1 siblings, 0 replies; 51+ messages in thread
From: Sergei Shtylyov @ 2018-06-07 20:19 UTC (permalink / raw)
To: Simon Horman, Rob Herring, Catalin Marinas, Will Deacon,
linux-renesas-soc, devicetree
Cc: Mark Rutland, Magnus Damm, linux-arm-kernel
Describe FCPVD0 in the R8A77980 device tree; it will be used by VSPD0 in
the next patch...
Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
arch/arm64/boot/dts/renesas/r8a77980.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
===================================================================
--- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -653,6 +653,14 @@
resets = <&cpg 408>;
};
+ fcpvd0: fcp@fea27000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfea27000 0 0x200>;
+ clocks = <&cpg CPG_MOD 603>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 603>;
+ };
+
prr: chipid@fff00044 {
compatible = "renesas,prr";
reg = <0 0xfff00044 0 4>;
^ permalink raw reply [flat|nested] 51+ messages in thread
* [PATCH v2 1/5] arm64: dts: renesas: r8a77980: add FCPVD support
@ 2018-06-07 20:19 ` Sergei Shtylyov
0 siblings, 0 replies; 51+ messages in thread
From: Sergei Shtylyov @ 2018-06-07 20:19 UTC (permalink / raw)
To: Simon Horman, Rob Herring, Catalin Marinas, Will Deacon,
linux-renesas-soc, devicetree
Cc: Magnus Damm, Mark Rutland, linux-arm-kernel
Describe FCPVD0 in the R8A77980 device tree; it will be used by VSPD0 in
the next patch...
Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
arch/arm64/boot/dts/renesas/r8a77980.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
===================================================================
--- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -653,6 +653,14 @@
resets = <&cpg 408>;
};
+ fcpvd0: fcp@fea27000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfea27000 0 0x200>;
+ clocks = <&cpg CPG_MOD 603>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 603>;
+ };
+
prr: chipid@fff00044 {
compatible = "renesas,prr";
reg = <0 0xfff00044 0 4>;
^ permalink raw reply [flat|nested] 51+ messages in thread
* [PATCH v2 1/5] arm64: dts: renesas: r8a77980: add FCPVD support
@ 2018-06-07 20:19 ` Sergei Shtylyov
0 siblings, 0 replies; 51+ messages in thread
From: Sergei Shtylyov @ 2018-06-07 20:19 UTC (permalink / raw)
To: linux-arm-kernel
Describe FCPVD0 in the R8A77980 device tree; it will be used by VSPD0 in
the next patch...
Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
arch/arm64/boot/dts/renesas/r8a77980.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
===================================================================
--- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -653,6 +653,14 @@
resets = <&cpg 408>;
};
+ fcpvd0: fcp at fea27000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfea27000 0 0x200>;
+ clocks = <&cpg CPG_MOD 603>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 603>;
+ };
+
prr: chipid at fff00044 {
compatible = "renesas,prr";
reg = <0 0xfff00044 0 4>;
^ permalink raw reply [flat|nested] 51+ messages in thread
* [PATCH v2 2/5] arm64: dts: renesas: r8a77980: add VSPD support
2018-06-07 20:17 ` Sergei Shtylyov
(?)
@ 2018-06-07 20:20 ` Sergei Shtylyov
-1 siblings, 0 replies; 51+ messages in thread
From: Sergei Shtylyov @ 2018-06-07 20:20 UTC (permalink / raw)
To: Simon Horman, Rob Herring, Catalin Marinas, Will Deacon,
linux-renesas-soc, devicetree
Cc: Mark Rutland, Magnus Damm, linux-arm-kernel
Describe VSPD0 in the R8A77980 device tree; it will be used by DU in
the next patch...
Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
arch/arm64/boot/dts/renesas/r8a77980.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
===================================================================
--- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -653,6 +653,16 @@
resets = <&cpg 408>;
};
+ vspd0: vsp@fea20000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfea20000 0 0x4000>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 623>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 623>;
+ renesas,fcp = <&fcpvd0>;
+ };
+
fcpvd0: fcp@fea27000 {
compatible = "renesas,fcpv";
reg = <0 0xfea27000 0 0x200>;
^ permalink raw reply [flat|nested] 51+ messages in thread
* [PATCH v2 2/5] arm64: dts: renesas: r8a77980: add VSPD support
@ 2018-06-07 20:20 ` Sergei Shtylyov
0 siblings, 0 replies; 51+ messages in thread
From: Sergei Shtylyov @ 2018-06-07 20:20 UTC (permalink / raw)
To: Simon Horman, Rob Herring, Catalin Marinas, Will Deacon,
linux-renesas-soc, devicetree
Cc: Magnus Damm, Mark Rutland, linux-arm-kernel
Describe VSPD0 in the R8A77980 device tree; it will be used by DU in
the next patch...
Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
arch/arm64/boot/dts/renesas/r8a77980.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
===================================================================
--- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -653,6 +653,16 @@
resets = <&cpg 408>;
};
+ vspd0: vsp@fea20000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfea20000 0 0x4000>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 623>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 623>;
+ renesas,fcp = <&fcpvd0>;
+ };
+
fcpvd0: fcp@fea27000 {
compatible = "renesas,fcpv";
reg = <0 0xfea27000 0 0x200>;
^ permalink raw reply [flat|nested] 51+ messages in thread
* [PATCH v2 2/5] arm64: dts: renesas: r8a77980: add VSPD support
@ 2018-06-07 20:20 ` Sergei Shtylyov
0 siblings, 0 replies; 51+ messages in thread
From: Sergei Shtylyov @ 2018-06-07 20:20 UTC (permalink / raw)
To: linux-arm-kernel
Describe VSPD0 in the R8A77980 device tree; it will be used by DU in
the next patch...
Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
arch/arm64/boot/dts/renesas/r8a77980.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
===================================================================
--- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -653,6 +653,16 @@
resets = <&cpg 408>;
};
+ vspd0: vsp at fea20000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfea20000 0 0x4000>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 623>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 623>;
+ renesas,fcp = <&fcpvd0>;
+ };
+
fcpvd0: fcp at fea27000 {
compatible = "renesas,fcpv";
reg = <0 0xfea27000 0 0x200>;
^ permalink raw reply [flat|nested] 51+ messages in thread
* [PATCH v2 3/5] arm64: dts: renesas: r8a77980: add DU support
2018-06-07 20:17 ` Sergei Shtylyov
(?)
@ 2018-06-07 20:21 ` Sergei Shtylyov
-1 siblings, 0 replies; 51+ messages in thread
From: Sergei Shtylyov @ 2018-06-07 20:21 UTC (permalink / raw)
To: Simon Horman, Rob Herring, Catalin Marinas, Will Deacon,
linux-renesas-soc, devicetree
Cc: Mark Rutland, Magnus Damm, linux-arm-kernel
Define the generic R8A77980 part of the DU device node.
Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
arch/arm64/boot/dts/renesas/r8a77980.dtsi | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
===================================================================
--- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -671,6 +671,36 @@
resets = <&cpg 603>;
};
+ du: display@feb00000 {
+ compatible = "renesas,du-r8a77980",
+ "renesas,du-r8a77970";
+ reg = <0 0xfeb00000 0 0x80000>;
+ interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 724>;
+ clock-names = "du.0";
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 724>;
+ vsps = <&vspd0>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ du_out_rgb: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ du_out_lvds0: endpoint {
+ };
+ };
+ };
+ };
+
prr: chipid@fff00044 {
compatible = "renesas,prr";
reg = <0 0xfff00044 0 4>;
^ permalink raw reply [flat|nested] 51+ messages in thread
* [PATCH v2 3/5] arm64: dts: renesas: r8a77980: add DU support
@ 2018-06-07 20:21 ` Sergei Shtylyov
0 siblings, 0 replies; 51+ messages in thread
From: Sergei Shtylyov @ 2018-06-07 20:21 UTC (permalink / raw)
To: Simon Horman, Rob Herring, Catalin Marinas, Will Deacon,
linux-renesas-soc, devicetree
Cc: Magnus Damm, Mark Rutland, linux-arm-kernel
Define the generic R8A77980 part of the DU device node.
Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
arch/arm64/boot/dts/renesas/r8a77980.dtsi | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
===================================================================
--- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -671,6 +671,36 @@
resets = <&cpg 603>;
};
+ du: display@feb00000 {
+ compatible = "renesas,du-r8a77980",
+ "renesas,du-r8a77970";
+ reg = <0 0xfeb00000 0 0x80000>;
+ interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 724>;
+ clock-names = "du.0";
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 724>;
+ vsps = <&vspd0>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ du_out_rgb: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ du_out_lvds0: endpoint {
+ };
+ };
+ };
+ };
+
prr: chipid@fff00044 {
compatible = "renesas,prr";
reg = <0 0xfff00044 0 4>;
^ permalink raw reply [flat|nested] 51+ messages in thread
* [PATCH v2 3/5] arm64: dts: renesas: r8a77980: add DU support
@ 2018-06-07 20:21 ` Sergei Shtylyov
0 siblings, 0 replies; 51+ messages in thread
From: Sergei Shtylyov @ 2018-06-07 20:21 UTC (permalink / raw)
To: linux-arm-kernel
Define the generic R8A77980 part of the DU device node.
Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
arch/arm64/boot/dts/renesas/r8a77980.dtsi | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
===================================================================
--- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -671,6 +671,36 @@
resets = <&cpg 603>;
};
+ du: display at feb00000 {
+ compatible = "renesas,du-r8a77980",
+ "renesas,du-r8a77970";
+ reg = <0 0xfeb00000 0 0x80000>;
+ interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 724>;
+ clock-names = "du.0";
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 724>;
+ vsps = <&vspd0>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ du_out_rgb: endpoint {
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+ du_out_lvds0: endpoint {
+ };
+ };
+ };
+ };
+
prr: chipid at fff00044 {
compatible = "renesas,prr";
reg = <0 0xfff00044 0 4>;
^ permalink raw reply [flat|nested] 51+ messages in thread
* [PATCH v2 4/5] arm64: dts: renesas: r8a77980: add LVDS support
2018-06-07 20:17 ` Sergei Shtylyov
(?)
@ 2018-06-07 20:23 ` Sergei Shtylyov
-1 siblings, 0 replies; 51+ messages in thread
From: Sergei Shtylyov @ 2018-06-07 20:23 UTC (permalink / raw)
To: Simon Horman, Rob Herring, Catalin Marinas, Will Deacon,
linux-renesas-soc, devicetree
Cc: Mark Rutland, Magnus Damm, linux-arm-kernel
Define the generic R8A77980 part of the LVDS device node.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
arch/arm64/boot/dts/renesas/r8a77980.dtsi | 29 +++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
===================================================================
--- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -696,6 +696,35 @@
port@1 {
reg = <1>;
du_out_lvds0: endpoint {
+ remote-endpoint = <&lvds0_in>;
+ };
+ };
+ };
+ };
+
+ lvds0: lvds-encoder@feb90000 {
+ compatible = "renesas,r8a77980-lvds";
+ reg = <0 0xfeb90000 0 0x14>;
+ clocks = <&cpg CPG_MOD 727>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 727>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds0_in: endpoint {
+ remote-endpoint =
+ <&du_out_lvds0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ lvds0_out: endpoint {
};
};
};
^ permalink raw reply [flat|nested] 51+ messages in thread
* [PATCH v2 4/5] arm64: dts: renesas: r8a77980: add LVDS support
@ 2018-06-07 20:23 ` Sergei Shtylyov
0 siblings, 0 replies; 51+ messages in thread
From: Sergei Shtylyov @ 2018-06-07 20:23 UTC (permalink / raw)
To: Simon Horman, Rob Herring, Catalin Marinas, Will Deacon,
linux-renesas-soc, devicetree
Cc: Magnus Damm, Mark Rutland, linux-arm-kernel
Define the generic R8A77980 part of the LVDS device node.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
arch/arm64/boot/dts/renesas/r8a77980.dtsi | 29 +++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
===================================================================
--- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -696,6 +696,35 @@
port@1 {
reg = <1>;
du_out_lvds0: endpoint {
+ remote-endpoint = <&lvds0_in>;
+ };
+ };
+ };
+ };
+
+ lvds0: lvds-encoder@feb90000 {
+ compatible = "renesas,r8a77980-lvds";
+ reg = <0 0xfeb90000 0 0x14>;
+ clocks = <&cpg CPG_MOD 727>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 727>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds0_in: endpoint {
+ remote-endpoint =
+ <&du_out_lvds0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ lvds0_out: endpoint {
};
};
};
^ permalink raw reply [flat|nested] 51+ messages in thread
* [PATCH v2 4/5] arm64: dts: renesas: r8a77980: add LVDS support
@ 2018-06-07 20:23 ` Sergei Shtylyov
0 siblings, 0 replies; 51+ messages in thread
From: Sergei Shtylyov @ 2018-06-07 20:23 UTC (permalink / raw)
To: linux-arm-kernel
Define the generic R8A77980 part of the LVDS device node.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
arch/arm64/boot/dts/renesas/r8a77980.dtsi | 29 +++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
===================================================================
--- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -696,6 +696,35 @@
port at 1 {
reg = <1>;
du_out_lvds0: endpoint {
+ remote-endpoint = <&lvds0_in>;
+ };
+ };
+ };
+ };
+
+ lvds0: lvds-encoder at feb90000 {
+ compatible = "renesas,r8a77980-lvds";
+ reg = <0 0xfeb90000 0 0x14>;
+ clocks = <&cpg CPG_MOD 727>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 727>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ lvds0_in: endpoint {
+ remote-endpoint =
+ <&du_out_lvds0>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+ lvds0_out: endpoint {
};
};
};
^ permalink raw reply [flat|nested] 51+ messages in thread
* [PATCH v2 5/5] arm64: dts: renesas: condor/v3hsk: add DU/LVDS/HDMI support
2018-06-07 20:17 ` Sergei Shtylyov
(?)
@ 2018-06-07 20:24 ` Sergei Shtylyov
-1 siblings, 0 replies; 51+ messages in thread
From: Sergei Shtylyov @ 2018-06-07 20:24 UTC (permalink / raw)
To: Simon Horman, Rob Herring, Catalin Marinas, Will Deacon,
linux-renesas-soc, devicetree
Cc: Mark Rutland, Magnus Damm, linux-arm-kernel
Define the Condor/V3HSK board dependent parts of the DU and LVDS device
nodes. Also add the device nodes for Thine THC63LVD1024 LVDS decoder and
Analog Devices ADV7511W HDMI transmitter...
Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
Changes in version 2:
- added the V3HSK DT update, reworded the description, renamed the patch;
- added a space between the HDMI node name and a brace.
arch/arm64/boot/dts/renesas/r8a77980-condor.dts | 106 +++++++++++++++++++++
arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts | 120 ++++++++++++++++++++++++
2 files changed, 226 insertions(+)
Index: renesas/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
===================================================================
--- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
+++ renesas/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
@@ -45,6 +45,56 @@
regulator-boot-on;
regulator-always-on;
};
+
+ d1_8v: regulator-2 {
+ compatible = "regulator-fixed";
+ regulator-name = "D1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con: endpoint {
+ remote-endpoint = <&adv7511_out>;
+ };
+ };
+ };
+
+ lvds-decoder {
+ compatible = "thine,thc63lvd1024";
+ vcc-supply = <&d3_3v>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ thc63lvd1024_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ thc63lvd1024_out: endpoint {
+ remote-endpoint = <&adv7511_in>;
+ };
+ };
+ };
+ };
+
+ x1_clk: x1-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <148500000>;
+ };
};
&avb {
@@ -74,6 +124,13 @@
};
};
+&du {
+ clocks = <&cpg CPG_MOD 724>,
+ <&x1_clk>;
+ clock-names = "du.0", "dclkin.0";
+ status = "okay";
+};
+
&extal_clk {
clock-frequency = <16666666>;
};
@@ -102,6 +159,55 @@
gpio-controller;
#gpio-cells = <2>;
};
+
+ hdmi@39 {
+ compatible = "adi,adv7511w";
+ reg = <0x39>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+ avdd-supply = <&d1_8v>;
+ dvdd-supply = <&d1_8v>;
+ pvdd-supply = <&d1_8v>;
+ bgvdd-supply = <&d1_8v>;
+ dvdd-3v-supply = <&d3_3v>;
+
+ adi,input-depth = <8>;
+ adi,input-colorspace = "rgb";
+ adi,input-clock = "1x";
+ adi,input-style = <1>;
+ adi,input-justification = "evenly";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7511_in: endpoint {
+ remote-endpoint = <&thc63lvd1024_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ adv7511_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+ };
+};
+
+&lvds0 {
+ status = "okay";
+
+ ports {
+ port@1 {
+ lvds0_out: endpoint {
+ remote-endpoint = <&thc63lvd1024_in>;
+ };
+ };
+ };
};
&mmc0 {
Index: renesas/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
===================================================================
--- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
+++ renesas/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
@@ -27,6 +27,63 @@
/* first 128MB is reserved for secure area. */
reg = <0 0x48000000 0 0x78000000>;
};
+
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con: endpoint {
+ remote-endpoint = <&adv7511_out>;
+ };
+ };
+ };
+
+ lvds-decoder {
+ compatible = "thine,thc63lvd1024";
+ vcc-supply = <&vcc3v3_d5>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ thc63lvd1024_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ thc63lvd1024_out: endpoint {
+ remote-endpoint = <&adv7511_in>;
+ };
+ };
+ };
+ };
+
+ vcc1v8_d4: regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC1V8_D4";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcc3v3_d5: regulator-1 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC3V3_D5";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+};
+
+&du {
+ status = "okay";
};
&extal_clk {
@@ -53,6 +110,64 @@
};
};
+&lvds0 {
+ status = "okay";
+
+ ports {
+ port@1 {
+ lvds0_out: endpoint {
+ remote-endpoint = <&thc63lvd1024_in>;
+ };
+ };
+ };
+};
+
+&i2c0 {
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ hdmi@39 {
+ compatible = "adi,adv7511w";
+ #sound-dai-cells = <0>;
+ reg = <0x39>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+ avdd-supply = <&vcc1v8_d4>;
+ dvdd-supply = <&vcc1v8_d4>;
+ pvdd-supply = <&vcc1v8_d4>;
+ bgvdd-supply = <&vcc1v8_d4>;
+ dvdd-3v-supply = <&vcc3v3_d5>;
+
+ adi,input-depth = <8>;
+ adi,input-colorspace = "rgb";
+ adi,input-clock = "1x";
+ adi,input-style = <1>;
+ adi,input-justification = "evenly";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7511_in: endpoint {
+ remote-endpoint = <&thc63lvd1024_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ adv7511_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+ };
+};
+
&pfc {
gether_pins: gether {
groups = "gether_mdio_a", "gether_rgmii",
@@ -60,6 +175,11 @@
function = "gether";
};
+ i2c0_pins: i2c0 {
+ groups = "i2c0";
+ function = "i2c0";
+ };
+
scif0_pins: scif0 {
groups = "scif0_data";
function = "scif0";
^ permalink raw reply [flat|nested] 51+ messages in thread
* [PATCH v2 5/5] arm64: dts: renesas: condor/v3hsk: add DU/LVDS/HDMI support
@ 2018-06-07 20:24 ` Sergei Shtylyov
0 siblings, 0 replies; 51+ messages in thread
From: Sergei Shtylyov @ 2018-06-07 20:24 UTC (permalink / raw)
To: Simon Horman, Rob Herring, Catalin Marinas, Will Deacon,
linux-renesas-soc, devicetree
Cc: Magnus Damm, Mark Rutland, linux-arm-kernel
Define the Condor/V3HSK board dependent parts of the DU and LVDS device
nodes. Also add the device nodes for Thine THC63LVD1024 LVDS decoder and
Analog Devices ADV7511W HDMI transmitter...
Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
Changes in version 2:
- added the V3HSK DT update, reworded the description, renamed the patch;
- added a space between the HDMI node name and a brace.
arch/arm64/boot/dts/renesas/r8a77980-condor.dts | 106 +++++++++++++++++++++
arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts | 120 ++++++++++++++++++++++++
2 files changed, 226 insertions(+)
Index: renesas/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
===================================================================
--- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
+++ renesas/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
@@ -45,6 +45,56 @@
regulator-boot-on;
regulator-always-on;
};
+
+ d1_8v: regulator-2 {
+ compatible = "regulator-fixed";
+ regulator-name = "D1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con: endpoint {
+ remote-endpoint = <&adv7511_out>;
+ };
+ };
+ };
+
+ lvds-decoder {
+ compatible = "thine,thc63lvd1024";
+ vcc-supply = <&d3_3v>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ thc63lvd1024_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ thc63lvd1024_out: endpoint {
+ remote-endpoint = <&adv7511_in>;
+ };
+ };
+ };
+ };
+
+ x1_clk: x1-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <148500000>;
+ };
};
&avb {
@@ -74,6 +124,13 @@
};
};
+&du {
+ clocks = <&cpg CPG_MOD 724>,
+ <&x1_clk>;
+ clock-names = "du.0", "dclkin.0";
+ status = "okay";
+};
+
&extal_clk {
clock-frequency = <16666666>;
};
@@ -102,6 +159,55 @@
gpio-controller;
#gpio-cells = <2>;
};
+
+ hdmi@39 {
+ compatible = "adi,adv7511w";
+ reg = <0x39>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+ avdd-supply = <&d1_8v>;
+ dvdd-supply = <&d1_8v>;
+ pvdd-supply = <&d1_8v>;
+ bgvdd-supply = <&d1_8v>;
+ dvdd-3v-supply = <&d3_3v>;
+
+ adi,input-depth = <8>;
+ adi,input-colorspace = "rgb";
+ adi,input-clock = "1x";
+ adi,input-style = <1>;
+ adi,input-justification = "evenly";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7511_in: endpoint {
+ remote-endpoint = <&thc63lvd1024_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ adv7511_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+ };
+};
+
+&lvds0 {
+ status = "okay";
+
+ ports {
+ port@1 {
+ lvds0_out: endpoint {
+ remote-endpoint = <&thc63lvd1024_in>;
+ };
+ };
+ };
};
&mmc0 {
Index: renesas/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
===================================================================
--- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
+++ renesas/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
@@ -27,6 +27,63 @@
/* first 128MB is reserved for secure area. */
reg = <0 0x48000000 0 0x78000000>;
};
+
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con: endpoint {
+ remote-endpoint = <&adv7511_out>;
+ };
+ };
+ };
+
+ lvds-decoder {
+ compatible = "thine,thc63lvd1024";
+ vcc-supply = <&vcc3v3_d5>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ thc63lvd1024_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ thc63lvd1024_out: endpoint {
+ remote-endpoint = <&adv7511_in>;
+ };
+ };
+ };
+ };
+
+ vcc1v8_d4: regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC1V8_D4";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcc3v3_d5: regulator-1 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC3V3_D5";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+};
+
+&du {
+ status = "okay";
};
&extal_clk {
@@ -53,6 +110,64 @@
};
};
+&lvds0 {
+ status = "okay";
+
+ ports {
+ port@1 {
+ lvds0_out: endpoint {
+ remote-endpoint = <&thc63lvd1024_in>;
+ };
+ };
+ };
+};
+
+&i2c0 {
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ hdmi@39 {
+ compatible = "adi,adv7511w";
+ #sound-dai-cells = <0>;
+ reg = <0x39>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+ avdd-supply = <&vcc1v8_d4>;
+ dvdd-supply = <&vcc1v8_d4>;
+ pvdd-supply = <&vcc1v8_d4>;
+ bgvdd-supply = <&vcc1v8_d4>;
+ dvdd-3v-supply = <&vcc3v3_d5>;
+
+ adi,input-depth = <8>;
+ adi,input-colorspace = "rgb";
+ adi,input-clock = "1x";
+ adi,input-style = <1>;
+ adi,input-justification = "evenly";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7511_in: endpoint {
+ remote-endpoint = <&thc63lvd1024_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ adv7511_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+ };
+};
+
&pfc {
gether_pins: gether {
groups = "gether_mdio_a", "gether_rgmii",
@@ -60,6 +175,11 @@
function = "gether";
};
+ i2c0_pins: i2c0 {
+ groups = "i2c0";
+ function = "i2c0";
+ };
+
scif0_pins: scif0 {
groups = "scif0_data";
function = "scif0";
^ permalink raw reply [flat|nested] 51+ messages in thread
* [PATCH v2 5/5] arm64: dts: renesas: condor/v3hsk: add DU/LVDS/HDMI support
@ 2018-06-07 20:24 ` Sergei Shtylyov
0 siblings, 0 replies; 51+ messages in thread
From: Sergei Shtylyov @ 2018-06-07 20:24 UTC (permalink / raw)
To: linux-arm-kernel
Define the Condor/V3HSK board dependent parts of the DU and LVDS device
nodes. Also add the device nodes for Thine THC63LVD1024 LVDS decoder and
Analog Devices ADV7511W HDMI transmitter...
Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
Changes in version 2:
- added the V3HSK DT update, reworded the description, renamed the patch;
- added a space between the HDMI node name and a brace.
arch/arm64/boot/dts/renesas/r8a77980-condor.dts | 106 +++++++++++++++++++++
arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts | 120 ++++++++++++++++++++++++
2 files changed, 226 insertions(+)
Index: renesas/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
===================================================================
--- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
+++ renesas/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
@@ -45,6 +45,56 @@
regulator-boot-on;
regulator-always-on;
};
+
+ d1_8v: regulator-2 {
+ compatible = "regulator-fixed";
+ regulator-name = "D1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con: endpoint {
+ remote-endpoint = <&adv7511_out>;
+ };
+ };
+ };
+
+ lvds-decoder {
+ compatible = "thine,thc63lvd1024";
+ vcc-supply = <&d3_3v>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ thc63lvd1024_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+
+ port at 2 {
+ reg = <2>;
+ thc63lvd1024_out: endpoint {
+ remote-endpoint = <&adv7511_in>;
+ };
+ };
+ };
+ };
+
+ x1_clk: x1-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <148500000>;
+ };
};
&avb {
@@ -74,6 +124,13 @@
};
};
+&du {
+ clocks = <&cpg CPG_MOD 724>,
+ <&x1_clk>;
+ clock-names = "du.0", "dclkin.0";
+ status = "okay";
+};
+
&extal_clk {
clock-frequency = <16666666>;
};
@@ -102,6 +159,55 @@
gpio-controller;
#gpio-cells = <2>;
};
+
+ hdmi at 39 {
+ compatible = "adi,adv7511w";
+ reg = <0x39>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+ avdd-supply = <&d1_8v>;
+ dvdd-supply = <&d1_8v>;
+ pvdd-supply = <&d1_8v>;
+ bgvdd-supply = <&d1_8v>;
+ dvdd-3v-supply = <&d3_3v>;
+
+ adi,input-depth = <8>;
+ adi,input-colorspace = "rgb";
+ adi,input-clock = "1x";
+ adi,input-style = <1>;
+ adi,input-justification = "evenly";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ adv7511_in: endpoint {
+ remote-endpoint = <&thc63lvd1024_out>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+ adv7511_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+ };
+};
+
+&lvds0 {
+ status = "okay";
+
+ ports {
+ port at 1 {
+ lvds0_out: endpoint {
+ remote-endpoint = <&thc63lvd1024_in>;
+ };
+ };
+ };
};
&mmc0 {
Index: renesas/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
===================================================================
--- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
+++ renesas/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
@@ -27,6 +27,63 @@
/* first 128MB is reserved for secure area. */
reg = <0 0x48000000 0 0x78000000>;
};
+
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con: endpoint {
+ remote-endpoint = <&adv7511_out>;
+ };
+ };
+ };
+
+ lvds-decoder {
+ compatible = "thine,thc63lvd1024";
+ vcc-supply = <&vcc3v3_d5>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ thc63lvd1024_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+
+ port at 2 {
+ reg = <2>;
+ thc63lvd1024_out: endpoint {
+ remote-endpoint = <&adv7511_in>;
+ };
+ };
+ };
+ };
+
+ vcc1v8_d4: regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC1V8_D4";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcc3v3_d5: regulator-1 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC3V3_D5";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+};
+
+&du {
+ status = "okay";
};
&extal_clk {
@@ -53,6 +110,64 @@
};
};
+&lvds0 {
+ status = "okay";
+
+ ports {
+ port at 1 {
+ lvds0_out: endpoint {
+ remote-endpoint = <&thc63lvd1024_in>;
+ };
+ };
+ };
+};
+
+&i2c0 {
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ hdmi at 39 {
+ compatible = "adi,adv7511w";
+ #sound-dai-cells = <0>;
+ reg = <0x39>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+ avdd-supply = <&vcc1v8_d4>;
+ dvdd-supply = <&vcc1v8_d4>;
+ pvdd-supply = <&vcc1v8_d4>;
+ bgvdd-supply = <&vcc1v8_d4>;
+ dvdd-3v-supply = <&vcc3v3_d5>;
+
+ adi,input-depth = <8>;
+ adi,input-colorspace = "rgb";
+ adi,input-clock = "1x";
+ adi,input-style = <1>;
+ adi,input-justification = "evenly";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ adv7511_in: endpoint {
+ remote-endpoint = <&thc63lvd1024_out>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+ adv7511_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+ };
+};
+
&pfc {
gether_pins: gether {
groups = "gether_mdio_a", "gether_rgmii",
@@ -60,6 +175,11 @@
function = "gether";
};
+ i2c0_pins: i2c0 {
+ groups = "i2c0";
+ function = "i2c0";
+ };
+
scif0_pins: scif0 {
groups = "scif0_data";
function = "scif0";
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH v2 0/5] Add R8A77980/Condor/V3HSK LVDS/HDMI support
2018-06-07 20:17 ` Sergei Shtylyov
(?)
@ 2018-06-08 8:21 ` Simon Horman
-1 siblings, 0 replies; 51+ messages in thread
From: Simon Horman @ 2018-06-08 8:21 UTC (permalink / raw)
To: Sergei Shtylyov
Cc: Mark Rutland, devicetree, Magnus Damm, Catalin Marinas,
Will Deacon, linux-renesas-soc, Rob Herring, linux-arm-kernel
On Thu, Jun 07, 2018 at 11:17:03PM +0300, Sergei Shtylyov wrote:
> Hello!
>
> Here's the set of 5 patches against Simon Horman's 'renesas.git' repo's
> 'renesas-devel-20180604-v4.17' tag. We're adding the R8A77980 FCPVD/VSPD/
> DU/LVDS device nodes and then describing the LVDS decoder and HDMI encoder
> connected to the LVDS output. These patches depend on the Thine THC63LVD1024
> driver and the R8A77980 LVDS support patch in order to work, and R8A77980 GPIO
> DT patches in order to apply/compile...
>
> [1/5] arm64: dts: renesas: r8a77980: add FCPVD support
> [2/5] arm64: dts: renesas: r8a77980: add VSPD support
> [3/5] arm64: dts: renesas: r8a77980: add DU support
> [4/5] arm64: dts: renesas: r8a77980: add LVDS support
> [5/5] arm64: dts: renesas: condor/v3hsk: add DU/LVDS/HDMI support
Sergei,
what are the changes in this series between v1 and v2?
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH v2 0/5] Add R8A77980/Condor/V3HSK LVDS/HDMI support
@ 2018-06-08 8:21 ` Simon Horman
0 siblings, 0 replies; 51+ messages in thread
From: Simon Horman @ 2018-06-08 8:21 UTC (permalink / raw)
To: Sergei Shtylyov
Cc: Rob Herring, Catalin Marinas, Will Deacon, linux-renesas-soc,
devicetree, Magnus Damm, Mark Rutland, linux-arm-kernel
On Thu, Jun 07, 2018 at 11:17:03PM +0300, Sergei Shtylyov wrote:
> Hello!
>
> Here's the set of 5 patches against Simon Horman's 'renesas.git' repo's
> 'renesas-devel-20180604-v4.17' tag. We're adding the R8A77980 FCPVD/VSPD/
> DU/LVDS device nodes and then describing the LVDS decoder and HDMI encoder
> connected to the LVDS output. These patches depend on the Thine THC63LVD1024
> driver and the R8A77980 LVDS support patch in order to work, and R8A77980 GPIO
> DT patches in order to apply/compile...
>
> [1/5] arm64: dts: renesas: r8a77980: add FCPVD support
> [2/5] arm64: dts: renesas: r8a77980: add VSPD support
> [3/5] arm64: dts: renesas: r8a77980: add DU support
> [4/5] arm64: dts: renesas: r8a77980: add LVDS support
> [5/5] arm64: dts: renesas: condor/v3hsk: add DU/LVDS/HDMI support
Sergei,
what are the changes in this series between v1 and v2?
^ permalink raw reply [flat|nested] 51+ messages in thread
* [PATCH v2 0/5] Add R8A77980/Condor/V3HSK LVDS/HDMI support
@ 2018-06-08 8:21 ` Simon Horman
0 siblings, 0 replies; 51+ messages in thread
From: Simon Horman @ 2018-06-08 8:21 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Jun 07, 2018 at 11:17:03PM +0300, Sergei Shtylyov wrote:
> Hello!
>
> Here's the set of 5 patches against Simon Horman's 'renesas.git' repo's
> 'renesas-devel-20180604-v4.17' tag. We're adding the R8A77980 FCPVD/VSPD/
> DU/LVDS device nodes and then describing the LVDS decoder and HDMI encoder
> connected to the LVDS output. These patches depend on the Thine THC63LVD1024
> driver and the R8A77980 LVDS support patch in order to work, and R8A77980 GPIO
> DT patches in order to apply/compile...
>
> [1/5] arm64: dts: renesas: r8a77980: add FCPVD support
> [2/5] arm64: dts: renesas: r8a77980: add VSPD support
> [3/5] arm64: dts: renesas: r8a77980: add DU support
> [4/5] arm64: dts: renesas: r8a77980: add LVDS support
> [5/5] arm64: dts: renesas: condor/v3hsk: add DU/LVDS/HDMI support
Sergei,
what are the changes in this series between v1 and v2?
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH v2 0/5] Add R8A77980/Condor/V3HSK LVDS/HDMI support
2018-06-08 8:21 ` Simon Horman
(?)
@ 2018-06-08 8:51 ` Sergei Shtylyov
-1 siblings, 0 replies; 51+ messages in thread
From: Sergei Shtylyov @ 2018-06-08 8:51 UTC (permalink / raw)
To: Simon Horman
Cc: Mark Rutland, devicetree, Magnus Damm, Catalin Marinas,
Will Deacon, linux-renesas-soc, Rob Herring, linux-arm-kernel
On 6/8/2018 11:21 AM, Simon Horman wrote:
>> Here's the set of 5 patches against Simon Horman's 'renesas.git' repo's
>> 'renesas-devel-20180604-v4.17' tag. We're adding the R8A77980 FCPVD/VSPD/
>> DU/LVDS device nodes and then describing the LVDS decoder and HDMI encoder
>> connected to the LVDS output. These patches depend on the Thine THC63LVD1024
>> driver and the R8A77980 LVDS support patch in order to work, and R8A77980 GPIO
>> DT patches in order to apply/compile...
>>
>> [1/5] arm64: dts: renesas: r8a77980: add FCPVD support
>> [2/5] arm64: dts: renesas: r8a77980: add VSPD support
>> [3/5] arm64: dts: renesas: r8a77980: add DU support
>> [4/5] arm64: dts: renesas: r8a77980: add LVDS support
>> [5/5] arm64: dts: renesas: condor/v3hsk: add DU/LVDS/HDMI support
>
> Sergei,
>
> what are the changes in this series between v1 and v2?
See patch #5. I've added the V3HSK DT update there...
MBR, Sergei
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH v2 0/5] Add R8A77980/Condor/V3HSK LVDS/HDMI support
@ 2018-06-08 8:51 ` Sergei Shtylyov
0 siblings, 0 replies; 51+ messages in thread
From: Sergei Shtylyov @ 2018-06-08 8:51 UTC (permalink / raw)
To: Simon Horman
Cc: Rob Herring, Catalin Marinas, Will Deacon, linux-renesas-soc,
devicetree, Magnus Damm, Mark Rutland, linux-arm-kernel
On 6/8/2018 11:21 AM, Simon Horman wrote:
>> Here's the set of 5 patches against Simon Horman's 'renesas.git' repo's
>> 'renesas-devel-20180604-v4.17' tag. We're adding the R8A77980 FCPVD/VSPD/
>> DU/LVDS device nodes and then describing the LVDS decoder and HDMI encoder
>> connected to the LVDS output. These patches depend on the Thine THC63LVD1024
>> driver and the R8A77980 LVDS support patch in order to work, and R8A77980 GPIO
>> DT patches in order to apply/compile...
>>
>> [1/5] arm64: dts: renesas: r8a77980: add FCPVD support
>> [2/5] arm64: dts: renesas: r8a77980: add VSPD support
>> [3/5] arm64: dts: renesas: r8a77980: add DU support
>> [4/5] arm64: dts: renesas: r8a77980: add LVDS support
>> [5/5] arm64: dts: renesas: condor/v3hsk: add DU/LVDS/HDMI support
>
> Sergei,
>
> what are the changes in this series between v1 and v2?
See patch #5. I've added the V3HSK DT update there...
MBR, Sergei
^ permalink raw reply [flat|nested] 51+ messages in thread
* [PATCH v2 0/5] Add R8A77980/Condor/V3HSK LVDS/HDMI support
@ 2018-06-08 8:51 ` Sergei Shtylyov
0 siblings, 0 replies; 51+ messages in thread
From: Sergei Shtylyov @ 2018-06-08 8:51 UTC (permalink / raw)
To: linux-arm-kernel
On 6/8/2018 11:21 AM, Simon Horman wrote:
>> Here's the set of 5 patches against Simon Horman's 'renesas.git' repo's
>> 'renesas-devel-20180604-v4.17' tag. We're adding the R8A77980 FCPVD/VSPD/
>> DU/LVDS device nodes and then describing the LVDS decoder and HDMI encoder
>> connected to the LVDS output. These patches depend on the Thine THC63LVD1024
>> driver and the R8A77980 LVDS support patch in order to work, and R8A77980 GPIO
>> DT patches in order to apply/compile...
>>
>> [1/5] arm64: dts: renesas: r8a77980: add FCPVD support
>> [2/5] arm64: dts: renesas: r8a77980: add VSPD support
>> [3/5] arm64: dts: renesas: r8a77980: add DU support
>> [4/5] arm64: dts: renesas: r8a77980: add LVDS support
>> [5/5] arm64: dts: renesas: condor/v3hsk: add DU/LVDS/HDMI support
>
> Sergei,
>
> what are the changes in this series between v1 and v2?
See patch #5. I've added the V3HSK DT update there...
MBR, Sergei
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH v2 1/5] arm64: dts: renesas: r8a77980: add FCPVD support
2018-06-07 20:19 ` Sergei Shtylyov
(?)
@ 2018-06-08 8:56 ` Simon Horman
-1 siblings, 0 replies; 51+ messages in thread
From: Simon Horman @ 2018-06-08 8:56 UTC (permalink / raw)
To: Sergei Shtylyov
Cc: Mark Rutland, devicetree, Magnus Damm, Catalin Marinas,
Will Deacon, linux-renesas-soc, Rob Herring, linux-arm-kernel
On Thu, Jun 07, 2018 at 11:19:31PM +0300, Sergei Shtylyov wrote:
> Describe FCPVD0 in the R8A77980 device tree; it will be used by VSPD0 in
> the next patch...
>
> Based on the original (and large) patch by Vladimir Barinov.
>
> Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Hi,
This looks fine to me but I will wait for the dependencies of this series
to land and to see if there are other reviews before applying.
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH v2 1/5] arm64: dts: renesas: r8a77980: add FCPVD support
@ 2018-06-08 8:56 ` Simon Horman
0 siblings, 0 replies; 51+ messages in thread
From: Simon Horman @ 2018-06-08 8:56 UTC (permalink / raw)
To: Sergei Shtylyov
Cc: Rob Herring, Catalin Marinas, Will Deacon, linux-renesas-soc,
devicetree, Magnus Damm, Mark Rutland, linux-arm-kernel
On Thu, Jun 07, 2018 at 11:19:31PM +0300, Sergei Shtylyov wrote:
> Describe FCPVD0 in the R8A77980 device tree; it will be used by VSPD0 in
> the next patch...
>
> Based on the original (and large) patch by Vladimir Barinov.
>
> Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Hi,
This looks fine to me but I will wait for the dependencies of this series
to land and to see if there are other reviews before applying.
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
^ permalink raw reply [flat|nested] 51+ messages in thread
* [PATCH v2 1/5] arm64: dts: renesas: r8a77980: add FCPVD support
@ 2018-06-08 8:56 ` Simon Horman
0 siblings, 0 replies; 51+ messages in thread
From: Simon Horman @ 2018-06-08 8:56 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Jun 07, 2018 at 11:19:31PM +0300, Sergei Shtylyov wrote:
> Describe FCPVD0 in the R8A77980 device tree; it will be used by VSPD0 in
> the next patch...
>
> Based on the original (and large) patch by Vladimir Barinov.
>
> Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Hi,
This looks fine to me but I will wait for the dependencies of this series
to land and to see if there are other reviews before applying.
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH v2 2/5] arm64: dts: renesas: r8a77980: add VSPD support
2018-06-07 20:20 ` Sergei Shtylyov
(?)
@ 2018-06-08 13:54 ` Simon Horman
-1 siblings, 0 replies; 51+ messages in thread
From: Simon Horman @ 2018-06-08 13:54 UTC (permalink / raw)
To: Sergei Shtylyov
Cc: Mark Rutland, devicetree, Magnus Damm, Geert Uytterhoeven,
Catalin Marinas, Will Deacon, linux-renesas-soc, Rob Herring,
Laurent Pinchart, linux-arm-kernel
[CC Laurent, Geert]
On Thu, Jun 07, 2018 at 11:20:47PM +0300, Sergei Shtylyov wrote:
> Describe VSPD0 in the R8A77980 device tree; it will be used by DU in
> the next patch...
>
> Based on the original (and large) patch by Vladimir Barinov.
>
> Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>
> ---
> arch/arm64/boot/dts/renesas/r8a77980.dtsi | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> ===================================================================
> --- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> +++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> @@ -653,6 +653,16 @@
> resets = <&cpg 408>;
> };
>
> + vspd0: vsp@fea20000 {
> + compatible = "renesas,vsp2";
> + reg = <0 0xfea20000 0 0x4000>;
As per "[PATCH] arm64: dts: renesas: Fix VSPD registers range"
I think the width of the range should be 0x5000.
> + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 623>;
> + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
> + resets = <&cpg 623>;
> + renesas,fcp = <&fcpvd0>;
> + };
> +
> fcpvd0: fcp@fea27000 {
> compatible = "renesas,fcpv";
> reg = <0 0xfea27000 0 0x200>;
>
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH v2 2/5] arm64: dts: renesas: r8a77980: add VSPD support
@ 2018-06-08 13:54 ` Simon Horman
0 siblings, 0 replies; 51+ messages in thread
From: Simon Horman @ 2018-06-08 13:54 UTC (permalink / raw)
To: Sergei Shtylyov
Cc: Rob Herring, Catalin Marinas, Will Deacon, linux-renesas-soc,
devicetree, Magnus Damm, Mark Rutland, linux-arm-kernel,
Laurent Pinchart, Geert Uytterhoeven
[CC Laurent, Geert]
On Thu, Jun 07, 2018 at 11:20:47PM +0300, Sergei Shtylyov wrote:
> Describe VSPD0 in the R8A77980 device tree; it will be used by DU in
> the next patch...
>
> Based on the original (and large) patch by Vladimir Barinov.
>
> Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>
> ---
> arch/arm64/boot/dts/renesas/r8a77980.dtsi | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> ===================================================================
> --- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> +++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> @@ -653,6 +653,16 @@
> resets = <&cpg 408>;
> };
>
> + vspd0: vsp@fea20000 {
> + compatible = "renesas,vsp2";
> + reg = <0 0xfea20000 0 0x4000>;
As per "[PATCH] arm64: dts: renesas: Fix VSPD registers range"
I think the width of the range should be 0x5000.
> + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 623>;
> + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
> + resets = <&cpg 623>;
> + renesas,fcp = <&fcpvd0>;
> + };
> +
> fcpvd0: fcp@fea27000 {
> compatible = "renesas,fcpv";
> reg = <0 0xfea27000 0 0x200>;
>
^ permalink raw reply [flat|nested] 51+ messages in thread
* [PATCH v2 2/5] arm64: dts: renesas: r8a77980: add VSPD support
@ 2018-06-08 13:54 ` Simon Horman
0 siblings, 0 replies; 51+ messages in thread
From: Simon Horman @ 2018-06-08 13:54 UTC (permalink / raw)
To: linux-arm-kernel
[CC Laurent, Geert]
On Thu, Jun 07, 2018 at 11:20:47PM +0300, Sergei Shtylyov wrote:
> Describe VSPD0 in the R8A77980 device tree; it will be used by DU in
> the next patch...
>
> Based on the original (and large) patch by Vladimir Barinov.
>
> Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>
> ---
> arch/arm64/boot/dts/renesas/r8a77980.dtsi | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> ===================================================================
> --- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> +++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> @@ -653,6 +653,16 @@
> resets = <&cpg 408>;
> };
>
> + vspd0: vsp at fea20000 {
> + compatible = "renesas,vsp2";
> + reg = <0 0xfea20000 0 0x4000>;
As per "[PATCH] arm64: dts: renesas: Fix VSPD registers range"
I think the width of the range should be 0x5000.
> + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 623>;
> + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
> + resets = <&cpg 623>;
> + renesas,fcp = <&fcpvd0>;
> + };
> +
> fcpvd0: fcp at fea27000 {
> compatible = "renesas,fcpv";
> reg = <0 0xfea27000 0 0x200>;
>
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH v2 2/5] arm64: dts: renesas: r8a77980: add VSPD support
2018-06-08 13:54 ` Simon Horman
(?)
@ 2018-06-08 14:01 ` Laurent Pinchart
-1 siblings, 0 replies; 51+ messages in thread
From: Laurent Pinchart @ 2018-06-08 14:01 UTC (permalink / raw)
To: Simon Horman
Cc: Mark Rutland, devicetree, Magnus Damm, Geert Uytterhoeven,
Sergei Shtylyov, Catalin Marinas, Will Deacon, linux-renesas-soc,
Rob Herring, Laurent Pinchart, linux-arm-kernel
Hello Simon,
On Friday, 8 June 2018 16:54:56 EEST Simon Horman wrote:
> [CC Laurent, Geert]
>
> On Thu, Jun 07, 2018 at 11:20:47PM +0300, Sergei Shtylyov wrote:
> > Describe VSPD0 in the R8A77980 device tree; it will be used by DU in
> > the next patch...
> >
> > Based on the original (and large) patch by Vladimir Barinov.
> >
> > Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
> > Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> >
> > ---
> >
> > arch/arm64/boot/dts/renesas/r8a77980.dtsi | 10 ++++++++++
> > 1 file changed, 10 insertions(+)
> >
> > Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> > ===================================================================
> > --- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> > +++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> > @@ -653,6 +653,16 @@
> > resets = <&cpg 408>;
> > };
> >
> > + vspd0: vsp@fea20000 {
> > + compatible = "renesas,vsp2";
> > + reg = <0 0xfea20000 0 0x4000>;
>
> As per "[PATCH] arm64: dts: renesas: Fix VSPD registers range"
> I think the width of the range should be 0x5000.
I agree with that.
> > + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&cpg CPG_MOD 623>;
> > + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
> > + resets = <&cpg 623>;
> > + renesas,fcp = <&fcpvd0>;
> > + };
> > +
> > fcpvd0: fcp@fea27000 {
> > compatible = "renesas,fcpv";
> > reg = <0 0xfea27000 0 0x200>;
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH v2 2/5] arm64: dts: renesas: r8a77980: add VSPD support
@ 2018-06-08 14:01 ` Laurent Pinchart
0 siblings, 0 replies; 51+ messages in thread
From: Laurent Pinchart @ 2018-06-08 14:01 UTC (permalink / raw)
To: Simon Horman
Cc: Sergei Shtylyov, Rob Herring, Catalin Marinas, Will Deacon,
linux-renesas-soc, devicetree, Magnus Damm, Mark Rutland,
linux-arm-kernel, Laurent Pinchart, Geert Uytterhoeven
Hello Simon,
On Friday, 8 June 2018 16:54:56 EEST Simon Horman wrote:
> [CC Laurent, Geert]
>
> On Thu, Jun 07, 2018 at 11:20:47PM +0300, Sergei Shtylyov wrote:
> > Describe VSPD0 in the R8A77980 device tree; it will be used by DU in
> > the next patch...
> >
> > Based on the original (and large) patch by Vladimir Barinov.
> >
> > Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
> > Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> >
> > ---
> >
> > arch/arm64/boot/dts/renesas/r8a77980.dtsi | 10 ++++++++++
> > 1 file changed, 10 insertions(+)
> >
> > Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> > ===================================================================
> > --- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> > +++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> > @@ -653,6 +653,16 @@
> > resets = <&cpg 408>;
> > };
> >
> > + vspd0: vsp@fea20000 {
> > + compatible = "renesas,vsp2";
> > + reg = <0 0xfea20000 0 0x4000>;
>
> As per "[PATCH] arm64: dts: renesas: Fix VSPD registers range"
> I think the width of the range should be 0x5000.
I agree with that.
> > + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&cpg CPG_MOD 623>;
> > + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
> > + resets = <&cpg 623>;
> > + renesas,fcp = <&fcpvd0>;
> > + };
> > +
> > fcpvd0: fcp@fea27000 {
> > compatible = "renesas,fcpv";
> > reg = <0 0xfea27000 0 0x200>;
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 51+ messages in thread
* [PATCH v2 2/5] arm64: dts: renesas: r8a77980: add VSPD support
@ 2018-06-08 14:01 ` Laurent Pinchart
0 siblings, 0 replies; 51+ messages in thread
From: Laurent Pinchart @ 2018-06-08 14:01 UTC (permalink / raw)
To: linux-arm-kernel
Hello Simon,
On Friday, 8 June 2018 16:54:56 EEST Simon Horman wrote:
> [CC Laurent, Geert]
>
> On Thu, Jun 07, 2018 at 11:20:47PM +0300, Sergei Shtylyov wrote:
> > Describe VSPD0 in the R8A77980 device tree; it will be used by DU in
> > the next patch...
> >
> > Based on the original (and large) patch by Vladimir Barinov.
> >
> > Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
> > Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> >
> > ---
> >
> > arch/arm64/boot/dts/renesas/r8a77980.dtsi | 10 ++++++++++
> > 1 file changed, 10 insertions(+)
> >
> > Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> > ===================================================================
> > --- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> > +++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> > @@ -653,6 +653,16 @@
> > resets = <&cpg 408>;
> > };
> >
> > + vspd0: vsp at fea20000 {
> > + compatible = "renesas,vsp2";
> > + reg = <0 0xfea20000 0 0x4000>;
>
> As per "[PATCH] arm64: dts: renesas: Fix VSPD registers range"
> I think the width of the range should be 0x5000.
I agree with that.
> > + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&cpg CPG_MOD 623>;
> > + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
> > + resets = <&cpg 623>;
> > + renesas,fcp = <&fcpvd0>;
> > + };
> > +
> > fcpvd0: fcp at fea27000 {
> > compatible = "renesas,fcpv";
> > reg = <0 0xfea27000 0 0x200>;
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH v2 3/5] arm64: dts: renesas: r8a77980: add DU support
2018-06-07 20:21 ` Sergei Shtylyov
(?)
@ 2018-06-08 14:21 ` Laurent Pinchart
-1 siblings, 0 replies; 51+ messages in thread
From: Laurent Pinchart @ 2018-06-08 14:21 UTC (permalink / raw)
To: Sergei Shtylyov
Cc: Mark Rutland, devicetree, Magnus Damm, Catalin Marinas,
Will Deacon, Rob Herring, linux-renesas-soc, Simon Horman,
linux-arm-kernel
Hi Sergei,
Thank you for the patch.
On Thursday, 7 June 2018 23:21:38 EEST Sergei Shtylyov wrote:
> Define the generic R8A77980 part of the DU device node.
>
> Based on the original (and large) patch by Vladimir Barinov.
>
> Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> arch/arm64/boot/dts/renesas/r8a77980.dtsi | 30 ++++++++++++++++++++++++++
> 1 file changed, 30 insertions(+)
>
> Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> ===================================================================
> --- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> +++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> @@ -671,6 +671,36 @@
> resets = <&cpg 603>;
> };
>
> + du: display@feb00000 {
> + compatible = "renesas,du-r8a77980",
> + "renesas,du-r8a77970";
> + reg = <0 0xfeb00000 0 0x80000>;
> + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 724>;
> + clock-names = "du.0";
> + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
> + resets = <&cpg 724>;
> + vsps = <&vspd0>;
> + status = "disabled";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + du_out_rgb: endpoint {
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + du_out_lvds0: endpoint {
> + };
> + };
> + };
> + };
> +
> prr: chipid@fff00044 {
> compatible = "renesas,prr";
> reg = <0 0xfff00044 0 4>;
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH v2 3/5] arm64: dts: renesas: r8a77980: add DU support
@ 2018-06-08 14:21 ` Laurent Pinchart
0 siblings, 0 replies; 51+ messages in thread
From: Laurent Pinchart @ 2018-06-08 14:21 UTC (permalink / raw)
To: Sergei Shtylyov
Cc: Simon Horman, Rob Herring, Catalin Marinas, Will Deacon,
linux-renesas-soc, devicetree, Magnus Damm, Mark Rutland,
linux-arm-kernel
Hi Sergei,
Thank you for the patch.
On Thursday, 7 June 2018 23:21:38 EEST Sergei Shtylyov wrote:
> Define the generic R8A77980 part of the DU device node.
>
> Based on the original (and large) patch by Vladimir Barinov.
>
> Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> arch/arm64/boot/dts/renesas/r8a77980.dtsi | 30 ++++++++++++++++++++++++++
> 1 file changed, 30 insertions(+)
>
> Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> ===================================================================
> --- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> +++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> @@ -671,6 +671,36 @@
> resets = <&cpg 603>;
> };
>
> + du: display@feb00000 {
> + compatible = "renesas,du-r8a77980",
> + "renesas,du-r8a77970";
> + reg = <0 0xfeb00000 0 0x80000>;
> + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 724>;
> + clock-names = "du.0";
> + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
> + resets = <&cpg 724>;
> + vsps = <&vspd0>;
> + status = "disabled";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + du_out_rgb: endpoint {
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + du_out_lvds0: endpoint {
> + };
> + };
> + };
> + };
> +
> prr: chipid@fff00044 {
> compatible = "renesas,prr";
> reg = <0 0xfff00044 0 4>;
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 51+ messages in thread
* [PATCH v2 3/5] arm64: dts: renesas: r8a77980: add DU support
@ 2018-06-08 14:21 ` Laurent Pinchart
0 siblings, 0 replies; 51+ messages in thread
From: Laurent Pinchart @ 2018-06-08 14:21 UTC (permalink / raw)
To: linux-arm-kernel
Hi Sergei,
Thank you for the patch.
On Thursday, 7 June 2018 23:21:38 EEST Sergei Shtylyov wrote:
> Define the generic R8A77980 part of the DU device node.
>
> Based on the original (and large) patch by Vladimir Barinov.
>
> Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> arch/arm64/boot/dts/renesas/r8a77980.dtsi | 30 ++++++++++++++++++++++++++
> 1 file changed, 30 insertions(+)
>
> Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> ===================================================================
> --- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> +++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> @@ -671,6 +671,36 @@
> resets = <&cpg 603>;
> };
>
> + du: display at feb00000 {
> + compatible = "renesas,du-r8a77980",
> + "renesas,du-r8a77970";
> + reg = <0 0xfeb00000 0 0x80000>;
> + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 724>;
> + clock-names = "du.0";
> + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
> + resets = <&cpg 724>;
> + vsps = <&vspd0>;
> + status = "disabled";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> + reg = <0>;
> + du_out_rgb: endpoint {
> + };
> + };
> +
> + port at 1 {
> + reg = <1>;
> + du_out_lvds0: endpoint {
> + };
> + };
> + };
> + };
> +
> prr: chipid at fff00044 {
> compatible = "renesas,prr";
> reg = <0 0xfff00044 0 4>;
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH v2 1/5] arm64: dts: renesas: r8a77980: add FCPVD support
2018-06-07 20:19 ` Sergei Shtylyov
(?)
@ 2018-06-08 14:22 ` Laurent Pinchart
-1 siblings, 0 replies; 51+ messages in thread
From: Laurent Pinchart @ 2018-06-08 14:22 UTC (permalink / raw)
To: Sergei Shtylyov
Cc: Mark Rutland, devicetree, Magnus Damm, Catalin Marinas,
Will Deacon, Rob Herring, linux-renesas-soc, Simon Horman,
linux-arm-kernel
Hi Sergei,
Thank you for the patch.
On Thursday, 7 June 2018 23:19:31 EEST Sergei Shtylyov wrote:
> Describe FCPVD0 in the R8A77980 device tree; it will be used by VSPD0 in
> the next patch...
>
> Based on the original (and large) patch by Vladimir Barinov.
>
> Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> arch/arm64/boot/dts/renesas/r8a77980.dtsi | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> ===================================================================
> --- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> +++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> @@ -653,6 +653,14 @@
> resets = <&cpg 408>;
> };
>
> + fcpvd0: fcp@fea27000 {
> + compatible = "renesas,fcpv";
> + reg = <0 0xfea27000 0 0x200>;
> + clocks = <&cpg CPG_MOD 603>;
> + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
> + resets = <&cpg 603>;
> + };
> +
> prr: chipid@fff00044 {
> compatible = "renesas,prr";
> reg = <0 0xfff00044 0 4>;
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH v2 1/5] arm64: dts: renesas: r8a77980: add FCPVD support
@ 2018-06-08 14:22 ` Laurent Pinchart
0 siblings, 0 replies; 51+ messages in thread
From: Laurent Pinchart @ 2018-06-08 14:22 UTC (permalink / raw)
To: Sergei Shtylyov
Cc: Simon Horman, Rob Herring, Catalin Marinas, Will Deacon,
linux-renesas-soc, devicetree, Magnus Damm, Mark Rutland,
linux-arm-kernel
Hi Sergei,
Thank you for the patch.
On Thursday, 7 June 2018 23:19:31 EEST Sergei Shtylyov wrote:
> Describe FCPVD0 in the R8A77980 device tree; it will be used by VSPD0 in
> the next patch...
>
> Based on the original (and large) patch by Vladimir Barinov.
>
> Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> arch/arm64/boot/dts/renesas/r8a77980.dtsi | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> ===================================================================
> --- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> +++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> @@ -653,6 +653,14 @@
> resets = <&cpg 408>;
> };
>
> + fcpvd0: fcp@fea27000 {
> + compatible = "renesas,fcpv";
> + reg = <0 0xfea27000 0 0x200>;
> + clocks = <&cpg CPG_MOD 603>;
> + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
> + resets = <&cpg 603>;
> + };
> +
> prr: chipid@fff00044 {
> compatible = "renesas,prr";
> reg = <0 0xfff00044 0 4>;
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 51+ messages in thread
* [PATCH v2 1/5] arm64: dts: renesas: r8a77980: add FCPVD support
@ 2018-06-08 14:22 ` Laurent Pinchart
0 siblings, 0 replies; 51+ messages in thread
From: Laurent Pinchart @ 2018-06-08 14:22 UTC (permalink / raw)
To: linux-arm-kernel
Hi Sergei,
Thank you for the patch.
On Thursday, 7 June 2018 23:19:31 EEST Sergei Shtylyov wrote:
> Describe FCPVD0 in the R8A77980 device tree; it will be used by VSPD0 in
> the next patch...
>
> Based on the original (and large) patch by Vladimir Barinov.
>
> Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> arch/arm64/boot/dts/renesas/r8a77980.dtsi | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> ===================================================================
> --- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> +++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> @@ -653,6 +653,14 @@
> resets = <&cpg 408>;
> };
>
> + fcpvd0: fcp at fea27000 {
> + compatible = "renesas,fcpv";
> + reg = <0 0xfea27000 0 0x200>;
> + clocks = <&cpg CPG_MOD 603>;
> + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
> + resets = <&cpg 603>;
> + };
> +
> prr: chipid at fff00044 {
> compatible = "renesas,prr";
> reg = <0 0xfff00044 0 4>;
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH v2 4/5] arm64: dts: renesas: r8a77980: add LVDS support
2018-06-07 20:23 ` Sergei Shtylyov
(?)
@ 2018-06-08 14:24 ` Laurent Pinchart
-1 siblings, 0 replies; 51+ messages in thread
From: Laurent Pinchart @ 2018-06-08 14:24 UTC (permalink / raw)
To: Sergei Shtylyov
Cc: Mark Rutland, devicetree, Magnus Damm, Catalin Marinas,
Will Deacon, Rob Herring, linux-renesas-soc, Simon Horman,
linux-arm-kernel
Hi Sergei,
Thank you for the patch.
On Thursday, 7 June 2018 23:23:06 EEST Sergei Shtylyov wrote:
> Define the generic R8A77980 part of the LVDS device node.
>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> arch/arm64/boot/dts/renesas/r8a77980.dtsi | 29 ++++++++++++++++++++++++++
> 1 file changed, 29 insertions(+)
>
> Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> ===================================================================
> --- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> +++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> @@ -696,6 +696,35 @@
> port@1 {
> reg = <1>;
> du_out_lvds0: endpoint {
> + remote-endpoint = <&lvds0_in>;
> + };
> + };
> + };
> + };
> +
> + lvds0: lvds-encoder@feb90000 {
> + compatible = "renesas,r8a77980-lvds";
> + reg = <0 0xfeb90000 0 0x14>;
> + clocks = <&cpg CPG_MOD 727>;
> + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
> + resets = <&cpg 727>;
> + status = "disabled";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + lvds0_in: endpoint {
> + remote-endpoint =
> + <&du_out_lvds0>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + lvds0_out: endpoint {
> };
> };
> };
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH v2 4/5] arm64: dts: renesas: r8a77980: add LVDS support
@ 2018-06-08 14:24 ` Laurent Pinchart
0 siblings, 0 replies; 51+ messages in thread
From: Laurent Pinchart @ 2018-06-08 14:24 UTC (permalink / raw)
To: Sergei Shtylyov
Cc: Simon Horman, Rob Herring, Catalin Marinas, Will Deacon,
linux-renesas-soc, devicetree, Magnus Damm, Mark Rutland,
linux-arm-kernel
Hi Sergei,
Thank you for the patch.
On Thursday, 7 June 2018 23:23:06 EEST Sergei Shtylyov wrote:
> Define the generic R8A77980 part of the LVDS device node.
>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> arch/arm64/boot/dts/renesas/r8a77980.dtsi | 29 ++++++++++++++++++++++++++
> 1 file changed, 29 insertions(+)
>
> Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> ===================================================================
> --- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> +++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> @@ -696,6 +696,35 @@
> port@1 {
> reg = <1>;
> du_out_lvds0: endpoint {
> + remote-endpoint = <&lvds0_in>;
> + };
> + };
> + };
> + };
> +
> + lvds0: lvds-encoder@feb90000 {
> + compatible = "renesas,r8a77980-lvds";
> + reg = <0 0xfeb90000 0 0x14>;
> + clocks = <&cpg CPG_MOD 727>;
> + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
> + resets = <&cpg 727>;
> + status = "disabled";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + lvds0_in: endpoint {
> + remote-endpoint =
> + <&du_out_lvds0>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + lvds0_out: endpoint {
> };
> };
> };
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 51+ messages in thread
* [PATCH v2 4/5] arm64: dts: renesas: r8a77980: add LVDS support
@ 2018-06-08 14:24 ` Laurent Pinchart
0 siblings, 0 replies; 51+ messages in thread
From: Laurent Pinchart @ 2018-06-08 14:24 UTC (permalink / raw)
To: linux-arm-kernel
Hi Sergei,
Thank you for the patch.
On Thursday, 7 June 2018 23:23:06 EEST Sergei Shtylyov wrote:
> Define the generic R8A77980 part of the LVDS device node.
>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> arch/arm64/boot/dts/renesas/r8a77980.dtsi | 29 ++++++++++++++++++++++++++
> 1 file changed, 29 insertions(+)
>
> Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> ===================================================================
> --- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> +++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> @@ -696,6 +696,35 @@
> port at 1 {
> reg = <1>;
> du_out_lvds0: endpoint {
> + remote-endpoint = <&lvds0_in>;
> + };
> + };
> + };
> + };
> +
> + lvds0: lvds-encoder at feb90000 {
> + compatible = "renesas,r8a77980-lvds";
> + reg = <0 0xfeb90000 0 0x14>;
> + clocks = <&cpg CPG_MOD 727>;
> + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
> + resets = <&cpg 727>;
> + status = "disabled";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> + reg = <0>;
> + lvds0_in: endpoint {
> + remote-endpoint =
> + <&du_out_lvds0>;
> + };
> + };
> +
> + port at 1 {
> + reg = <1>;
> + lvds0_out: endpoint {
> };
> };
> };
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH v2 0/5] Add R8A77980/Condor/V3HSK LVDS/HDMI support
2018-06-07 20:17 ` Sergei Shtylyov
(?)
@ 2018-06-08 14:27 ` Laurent Pinchart
-1 siblings, 0 replies; 51+ messages in thread
From: Laurent Pinchart @ 2018-06-08 14:27 UTC (permalink / raw)
To: Sergei Shtylyov
Cc: Mark Rutland, devicetree, Magnus Damm, Catalin Marinas,
Will Deacon, Rob Herring, linux-renesas-soc, Simon Horman,
linux-arm-kernel
Hi Sergei,
On Thursday, 7 June 2018 23:17:03 EEST Sergei Shtylyov wrote:
> Hello!
>
> Here's the set of 5 patches against Simon Horman's 'renesas.git' repo's
> 'renesas-devel-20180604-v4.17' tag. We're adding the R8A77980 FCPVD/VSPD/
> DU/LVDS device nodes and then describing the LVDS decoder and HDMI encoder
> connected to the LVDS output. These patches depend on the Thine THC63LVD1024
> driver and the R8A77980 LVDS support patch in order to work, and R8A77980
> GPIO DT patches in order to apply/compile...
>
> [1/5] arm64: dts: renesas: r8a77980: add FCPVD support
> [2/5] arm64: dts: renesas: r8a77980: add VSPD support
> [3/5] arm64: dts: renesas: r8a77980: add DU support
> [4/5] arm64: dts: renesas: r8a77980: add LVDS support
Based on the recent request of the ARM SoC maintainers to avoid a plethora of
small patches, I think you can squash 1/5 to 4/5 all together.
> [5/5] arm64: dts: renesas: condor/v3hsk: add DU/LVDS/HDMI support
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH v2 0/5] Add R8A77980/Condor/V3HSK LVDS/HDMI support
@ 2018-06-08 14:27 ` Laurent Pinchart
0 siblings, 0 replies; 51+ messages in thread
From: Laurent Pinchart @ 2018-06-08 14:27 UTC (permalink / raw)
To: Sergei Shtylyov
Cc: Simon Horman, Rob Herring, Catalin Marinas, Will Deacon,
linux-renesas-soc, devicetree, Magnus Damm, Mark Rutland,
linux-arm-kernel
Hi Sergei,
On Thursday, 7 June 2018 23:17:03 EEST Sergei Shtylyov wrote:
> Hello!
>
> Here's the set of 5 patches against Simon Horman's 'renesas.git' repo's
> 'renesas-devel-20180604-v4.17' tag. We're adding the R8A77980 FCPVD/VSPD/
> DU/LVDS device nodes and then describing the LVDS decoder and HDMI encoder
> connected to the LVDS output. These patches depend on the Thine THC63LVD1024
> driver and the R8A77980 LVDS support patch in order to work, and R8A77980
> GPIO DT patches in order to apply/compile...
>
> [1/5] arm64: dts: renesas: r8a77980: add FCPVD support
> [2/5] arm64: dts: renesas: r8a77980: add VSPD support
> [3/5] arm64: dts: renesas: r8a77980: add DU support
> [4/5] arm64: dts: renesas: r8a77980: add LVDS support
Based on the recent request of the ARM SoC maintainers to avoid a plethora of
small patches, I think you can squash 1/5 to 4/5 all together.
> [5/5] arm64: dts: renesas: condor/v3hsk: add DU/LVDS/HDMI support
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 51+ messages in thread
* [PATCH v2 0/5] Add R8A77980/Condor/V3HSK LVDS/HDMI support
@ 2018-06-08 14:27 ` Laurent Pinchart
0 siblings, 0 replies; 51+ messages in thread
From: Laurent Pinchart @ 2018-06-08 14:27 UTC (permalink / raw)
To: linux-arm-kernel
Hi Sergei,
On Thursday, 7 June 2018 23:17:03 EEST Sergei Shtylyov wrote:
> Hello!
>
> Here's the set of 5 patches against Simon Horman's 'renesas.git' repo's
> 'renesas-devel-20180604-v4.17' tag. We're adding the R8A77980 FCPVD/VSPD/
> DU/LVDS device nodes and then describing the LVDS decoder and HDMI encoder
> connected to the LVDS output. These patches depend on the Thine THC63LVD1024
> driver and the R8A77980 LVDS support patch in order to work, and R8A77980
> GPIO DT patches in order to apply/compile...
>
> [1/5] arm64: dts: renesas: r8a77980: add FCPVD support
> [2/5] arm64: dts: renesas: r8a77980: add VSPD support
> [3/5] arm64: dts: renesas: r8a77980: add DU support
> [4/5] arm64: dts: renesas: r8a77980: add LVDS support
Based on the recent request of the ARM SoC maintainers to avoid a plethora of
small patches, I think you can squash 1/5 to 4/5 all together.
> [5/5] arm64: dts: renesas: condor/v3hsk: add DU/LVDS/HDMI support
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH v2 0/5] Add R8A77980/Condor/V3HSK LVDS/HDMI support
2018-06-08 14:27 ` Laurent Pinchart
(?)
@ 2018-06-11 8:15 ` Simon Horman
-1 siblings, 0 replies; 51+ messages in thread
From: Simon Horman @ 2018-06-11 8:15 UTC (permalink / raw)
To: Laurent Pinchart
Cc: Mark Rutland, devicetree, Magnus Damm, Sergei Shtylyov,
Catalin Marinas, Will Deacon, linux-renesas-soc, Rob Herring,
linux-arm-kernel
On Fri, Jun 08, 2018 at 05:27:19PM +0300, Laurent Pinchart wrote:
> Hi Sergei,
>
> On Thursday, 7 June 2018 23:17:03 EEST Sergei Shtylyov wrote:
> > Hello!
> >
> > Here's the set of 5 patches against Simon Horman's 'renesas.git' repo's
> > 'renesas-devel-20180604-v4.17' tag. We're adding the R8A77980 FCPVD/VSPD/
> > DU/LVDS device nodes and then describing the LVDS decoder and HDMI encoder
> > connected to the LVDS output. These patches depend on the Thine THC63LVD1024
> > driver and the R8A77980 LVDS support patch in order to work, and R8A77980
> > GPIO DT patches in order to apply/compile...
> >
> > [1/5] arm64: dts: renesas: r8a77980: add FCPVD support
> > [2/5] arm64: dts: renesas: r8a77980: add VSPD support
> > [3/5] arm64: dts: renesas: r8a77980: add DU support
> > [4/5] arm64: dts: renesas: r8a77980: add LVDS support
>
> Based on the recent request of the ARM SoC maintainers to avoid a plethora of
> small patches, I think you can squash 1/5 to 4/5 all together.
Agreed.
Seregi could you please post a v2 with patches 1 - 4 squashed and the
register range for VSPD0 reduced to 0x5000? Thanks!
> > [5/5] arm64: dts: renesas: condor/v3hsk: add DU/LVDS/HDMI support
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH v2 0/5] Add R8A77980/Condor/V3HSK LVDS/HDMI support
@ 2018-06-11 8:15 ` Simon Horman
0 siblings, 0 replies; 51+ messages in thread
From: Simon Horman @ 2018-06-11 8:15 UTC (permalink / raw)
To: Laurent Pinchart
Cc: Sergei Shtylyov, Rob Herring, Catalin Marinas, Will Deacon,
linux-renesas-soc, devicetree, Magnus Damm, Mark Rutland,
linux-arm-kernel
On Fri, Jun 08, 2018 at 05:27:19PM +0300, Laurent Pinchart wrote:
> Hi Sergei,
>
> On Thursday, 7 June 2018 23:17:03 EEST Sergei Shtylyov wrote:
> > Hello!
> >
> > Here's the set of 5 patches against Simon Horman's 'renesas.git' repo's
> > 'renesas-devel-20180604-v4.17' tag. We're adding the R8A77980 FCPVD/VSPD/
> > DU/LVDS device nodes and then describing the LVDS decoder and HDMI encoder
> > connected to the LVDS output. These patches depend on the Thine THC63LVD1024
> > driver and the R8A77980 LVDS support patch in order to work, and R8A77980
> > GPIO DT patches in order to apply/compile...
> >
> > [1/5] arm64: dts: renesas: r8a77980: add FCPVD support
> > [2/5] arm64: dts: renesas: r8a77980: add VSPD support
> > [3/5] arm64: dts: renesas: r8a77980: add DU support
> > [4/5] arm64: dts: renesas: r8a77980: add LVDS support
>
> Based on the recent request of the ARM SoC maintainers to avoid a plethora of
> small patches, I think you can squash 1/5 to 4/5 all together.
Agreed.
Seregi could you please post a v2 with patches 1 - 4 squashed and the
register range for VSPD0 reduced to 0x5000? Thanks!
> > [5/5] arm64: dts: renesas: condor/v3hsk: add DU/LVDS/HDMI support
^ permalink raw reply [flat|nested] 51+ messages in thread
* [PATCH v2 0/5] Add R8A77980/Condor/V3HSK LVDS/HDMI support
@ 2018-06-11 8:15 ` Simon Horman
0 siblings, 0 replies; 51+ messages in thread
From: Simon Horman @ 2018-06-11 8:15 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Jun 08, 2018 at 05:27:19PM +0300, Laurent Pinchart wrote:
> Hi Sergei,
>
> On Thursday, 7 June 2018 23:17:03 EEST Sergei Shtylyov wrote:
> > Hello!
> >
> > Here's the set of 5 patches against Simon Horman's 'renesas.git' repo's
> > 'renesas-devel-20180604-v4.17' tag. We're adding the R8A77980 FCPVD/VSPD/
> > DU/LVDS device nodes and then describing the LVDS decoder and HDMI encoder
> > connected to the LVDS output. These patches depend on the Thine THC63LVD1024
> > driver and the R8A77980 LVDS support patch in order to work, and R8A77980
> > GPIO DT patches in order to apply/compile...
> >
> > [1/5] arm64: dts: renesas: r8a77980: add FCPVD support
> > [2/5] arm64: dts: renesas: r8a77980: add VSPD support
> > [3/5] arm64: dts: renesas: r8a77980: add DU support
> > [4/5] arm64: dts: renesas: r8a77980: add LVDS support
>
> Based on the recent request of the ARM SoC maintainers to avoid a plethora of
> small patches, I think you can squash 1/5 to 4/5 all together.
Agreed.
Seregi could you please post a v2 with patches 1 - 4 squashed and the
register range for VSPD0 reduced to 0x5000? Thanks!
> > [5/5] arm64: dts: renesas: condor/v3hsk: add DU/LVDS/HDMI support
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH v2 0/5] Add R8A77980/Condor/V3HSK LVDS/HDMI support
2018-06-11 8:15 ` Simon Horman
(?)
@ 2018-06-13 19:07 ` Sergei Shtylyov
-1 siblings, 0 replies; 51+ messages in thread
From: Sergei Shtylyov @ 2018-06-13 19:07 UTC (permalink / raw)
To: Simon Horman, Laurent Pinchart
Cc: Mark Rutland, devicetree, Magnus Damm, Catalin Marinas,
Will Deacon, linux-renesas-soc, Rob Herring, linux-arm-kernel
On 06/11/2018 11:15 AM, Simon Horman wrote:
>>> Here's the set of 5 patches against Simon Horman's 'renesas.git' repo's
>>> 'renesas-devel-20180604-v4.17' tag. We're adding the R8A77980 FCPVD/VSPD/
>>> DU/LVDS device nodes and then describing the LVDS decoder and HDMI encoder
>>> connected to the LVDS output. These patches depend on the Thine THC63LVD1024
>>> driver and the R8A77980 LVDS support patch in order to work, and R8A77980
>>> GPIO DT patches in order to apply/compile...
>>>
>>> [1/5] arm64: dts: renesas: r8a77980: add FCPVD support
>>> [2/5] arm64: dts: renesas: r8a77980: add VSPD support
>>> [3/5] arm64: dts: renesas: r8a77980: add DU support
>>> [4/5] arm64: dts: renesas: r8a77980: add LVDS support
>>
>> Based on the recent request of the ARM SoC maintainers to avoid a plethora of
>> small patches, I think you can squash 1/5 to 4/5 all together.
>
> Agreed.
>
> Seregi could you please post a v2 with patches 1 - 4 squashed and the
It's going to be v3 already. :-)
> register range for VSPD0 reduced to 0x5000? Thanks!
More like increased. :-)
Working on it...
>>> [5/5] arm64: dts: renesas: condor/v3hsk: add DU/LVDS/HDMI support
MBR, Sergei
^ permalink raw reply [flat|nested] 51+ messages in thread
* Re: [PATCH v2 0/5] Add R8A77980/Condor/V3HSK LVDS/HDMI support
@ 2018-06-13 19:07 ` Sergei Shtylyov
0 siblings, 0 replies; 51+ messages in thread
From: Sergei Shtylyov @ 2018-06-13 19:07 UTC (permalink / raw)
To: Simon Horman, Laurent Pinchart
Cc: Rob Herring, Catalin Marinas, Will Deacon, linux-renesas-soc,
devicetree, Magnus Damm, Mark Rutland, linux-arm-kernel
On 06/11/2018 11:15 AM, Simon Horman wrote:
>>> Here's the set of 5 patches against Simon Horman's 'renesas.git' repo's
>>> 'renesas-devel-20180604-v4.17' tag. We're adding the R8A77980 FCPVD/VSPD/
>>> DU/LVDS device nodes and then describing the LVDS decoder and HDMI encoder
>>> connected to the LVDS output. These patches depend on the Thine THC63LVD1024
>>> driver and the R8A77980 LVDS support patch in order to work, and R8A77980
>>> GPIO DT patches in order to apply/compile...
>>>
>>> [1/5] arm64: dts: renesas: r8a77980: add FCPVD support
>>> [2/5] arm64: dts: renesas: r8a77980: add VSPD support
>>> [3/5] arm64: dts: renesas: r8a77980: add DU support
>>> [4/5] arm64: dts: renesas: r8a77980: add LVDS support
>>
>> Based on the recent request of the ARM SoC maintainers to avoid a plethora of
>> small patches, I think you can squash 1/5 to 4/5 all together.
>
> Agreed.
>
> Seregi could you please post a v2 with patches 1 - 4 squashed and the
It's going to be v3 already. :-)
> register range for VSPD0 reduced to 0x5000? Thanks!
More like increased. :-)
Working on it...
>>> [5/5] arm64: dts: renesas: condor/v3hsk: add DU/LVDS/HDMI support
MBR, Sergei
^ permalink raw reply [flat|nested] 51+ messages in thread
* [PATCH v2 0/5] Add R8A77980/Condor/V3HSK LVDS/HDMI support
@ 2018-06-13 19:07 ` Sergei Shtylyov
0 siblings, 0 replies; 51+ messages in thread
From: Sergei Shtylyov @ 2018-06-13 19:07 UTC (permalink / raw)
To: linux-arm-kernel
On 06/11/2018 11:15 AM, Simon Horman wrote:
>>> Here's the set of 5 patches against Simon Horman's 'renesas.git' repo's
>>> 'renesas-devel-20180604-v4.17' tag. We're adding the R8A77980 FCPVD/VSPD/
>>> DU/LVDS device nodes and then describing the LVDS decoder and HDMI encoder
>>> connected to the LVDS output. These patches depend on the Thine THC63LVD1024
>>> driver and the R8A77980 LVDS support patch in order to work, and R8A77980
>>> GPIO DT patches in order to apply/compile...
>>>
>>> [1/5] arm64: dts: renesas: r8a77980: add FCPVD support
>>> [2/5] arm64: dts: renesas: r8a77980: add VSPD support
>>> [3/5] arm64: dts: renesas: r8a77980: add DU support
>>> [4/5] arm64: dts: renesas: r8a77980: add LVDS support
>>
>> Based on the recent request of the ARM SoC maintainers to avoid a plethora of
>> small patches, I think you can squash 1/5 to 4/5 all together.
>
> Agreed.
>
> Seregi could you please post a v2 with patches 1 - 4 squashed and the
It's going to be v3 already. :-)
> register range for VSPD0 reduced to 0x5000? Thanks!
More like increased. :-)
Working on it...
>>> [5/5] arm64: dts: renesas: condor/v3hsk: add DU/LVDS/HDMI support
MBR, Sergei
^ permalink raw reply [flat|nested] 51+ messages in thread
end of thread, other threads:[~2018-06-13 19:07 UTC | newest]
Thread overview: 51+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-06-07 20:17 [PATCH v2 0/5] Add R8A77980/Condor/V3HSK LVDS/HDMI support Sergei Shtylyov
2018-06-07 20:17 ` Sergei Shtylyov
2018-06-07 20:17 ` Sergei Shtylyov
2018-06-07 20:19 ` [PATCH v2 1/5] arm64: dts: renesas: r8a77980: add FCPVD support Sergei Shtylyov
2018-06-07 20:19 ` Sergei Shtylyov
2018-06-07 20:19 ` Sergei Shtylyov
2018-06-08 8:56 ` Simon Horman
2018-06-08 8:56 ` Simon Horman
2018-06-08 8:56 ` Simon Horman
2018-06-08 14:22 ` Laurent Pinchart
2018-06-08 14:22 ` Laurent Pinchart
2018-06-08 14:22 ` Laurent Pinchart
2018-06-07 20:20 ` [PATCH v2 2/5] arm64: dts: renesas: r8a77980: add VSPD support Sergei Shtylyov
2018-06-07 20:20 ` Sergei Shtylyov
2018-06-07 20:20 ` Sergei Shtylyov
2018-06-08 13:54 ` Simon Horman
2018-06-08 13:54 ` Simon Horman
2018-06-08 13:54 ` Simon Horman
2018-06-08 14:01 ` Laurent Pinchart
2018-06-08 14:01 ` Laurent Pinchart
2018-06-08 14:01 ` Laurent Pinchart
2018-06-07 20:21 ` [PATCH v2 3/5] arm64: dts: renesas: r8a77980: add DU support Sergei Shtylyov
2018-06-07 20:21 ` Sergei Shtylyov
2018-06-07 20:21 ` Sergei Shtylyov
2018-06-08 14:21 ` Laurent Pinchart
2018-06-08 14:21 ` Laurent Pinchart
2018-06-08 14:21 ` Laurent Pinchart
2018-06-07 20:23 ` [PATCH v2 4/5] arm64: dts: renesas: r8a77980: add LVDS support Sergei Shtylyov
2018-06-07 20:23 ` Sergei Shtylyov
2018-06-07 20:23 ` Sergei Shtylyov
2018-06-08 14:24 ` Laurent Pinchart
2018-06-08 14:24 ` Laurent Pinchart
2018-06-08 14:24 ` Laurent Pinchart
2018-06-07 20:24 ` [PATCH v2 5/5] arm64: dts: renesas: condor/v3hsk: add DU/LVDS/HDMI support Sergei Shtylyov
2018-06-07 20:24 ` Sergei Shtylyov
2018-06-07 20:24 ` Sergei Shtylyov
2018-06-08 8:21 ` [PATCH v2 0/5] Add R8A77980/Condor/V3HSK LVDS/HDMI support Simon Horman
2018-06-08 8:21 ` Simon Horman
2018-06-08 8:21 ` Simon Horman
2018-06-08 8:51 ` Sergei Shtylyov
2018-06-08 8:51 ` Sergei Shtylyov
2018-06-08 8:51 ` Sergei Shtylyov
2018-06-08 14:27 ` Laurent Pinchart
2018-06-08 14:27 ` Laurent Pinchart
2018-06-08 14:27 ` Laurent Pinchart
2018-06-11 8:15 ` Simon Horman
2018-06-11 8:15 ` Simon Horman
2018-06-11 8:15 ` Simon Horman
2018-06-13 19:07 ` Sergei Shtylyov
2018-06-13 19:07 ` Sergei Shtylyov
2018-06-13 19:07 ` Sergei Shtylyov
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.