All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rajeev Kumar <rajeev-dlh.kumar@st.com>
To: tiwai@suse.de, broonie@opensource.wolfsonmicro.com, perex@perex.cz
Cc: Vipin Kumar <vipin.kumar@st.com>,
	alsa-devel@alsa-project.org, spear-devel@list.st.com,
	Rajeev Kumar <rajeev-dlh.kumar@st.com>,
	lrg@slimlogic.co.uk
Subject: [PATCH 5/8] sound:asoc:spdif_out: Add spdif out support
Date: Tue, 20 Mar 2012 17:03:49 +0530	[thread overview]
Message-ID: <742a603d7c5b0381e4f528d6b655a16ecf70721e.1332242166.git.rajeev-dlh.kumar@st.com> (raw)
In-Reply-To: <cover.1332242166.git.rajeev-dlh.kumar@st.com>

From: Vipin Kumar <vipin.kumar@st.com>

This patch implements the spdif out driver for ST peripheral
This peripheral implements IEC60958 standard

Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Signed-off-by: vipin Kumar <vipin.kumar@st.com>
---
 sound/soc/spear/spdif_out.c      |  397 ++++++++++++++++++++++++++++++++++++++
 sound/soc/spear/spdif_out_regs.h |   79 ++++++++
 2 files changed, 476 insertions(+), 0 deletions(-)
 create mode 100644 sound/soc/spear/spdif_out.c
 create mode 100644 sound/soc/spear/spdif_out_regs.h

diff --git a/sound/soc/spear/spdif_out.c b/sound/soc/spear/spdif_out.c
new file mode 100644
index 0000000..757fac1
--- /dev/null
+++ b/sound/soc/spear/spdif_out.c
@@ -0,0 +1,397 @@
+/*
+ * ALSA SoC SPDIF Out Audio Layer for spear processors
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Vipin Kumar <vipin.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spear_dma.h>
+#include <sound/soc.h>
+#include <mach/spdif.h>
+#include "spdif_out_regs.h"
+
+static int spdif_out_mute;
+
+struct spdif_out_params {
+	u32 rate;
+	u32 core_freq;
+};
+
+struct spdif_out_dev {
+	struct clk *clk;
+	struct dma_data dma_params;
+	struct spdif_out_params saved_params;
+	u32 running;
+	void *io_base;
+};
+
+static void spdif_out_configure(struct spdif_out_dev *host)
+{
+	writel(SPDIF_OUT_RESET, host->io_base + SPDIF_OUT_SOFT_RST);
+	mdelay(1);
+	writel(readl(host->io_base + SPDIF_OUT_SOFT_RST) & ~SPDIF_OUT_RESET,
+			host->io_base + SPDIF_OUT_SOFT_RST);
+
+	writel(SPDIF_OUT_FDMA_TRIG_16 | SPDIF_OUT_MEMFMT_16_16 |
+			SPDIF_OUT_VALID_HW | SPDIF_OUT_USER_HW |
+			SPDIF_OUT_CHNLSTA_HW | SPDIF_OUT_PARITY_HW,
+			host->io_base + SPDIF_OUT_CFG);
+
+	writel(0x7F, host->io_base + SPDIF_OUT_INT_STA_CLR);
+	writel(0x7F, host->io_base + SPDIF_OUT_INT_EN_CLR);
+}
+
+static int spdif_out_startup(struct snd_pcm_substream *substream,
+		struct snd_soc_dai *cpu_dai)
+{
+	struct spdif_out_dev *host = snd_soc_dai_get_drvdata(cpu_dai);
+	int ret;
+
+	if (substream->stream != SNDRV_PCM_STREAM_PLAYBACK)
+		return -EINVAL;
+
+	snd_soc_dai_set_dma_data(cpu_dai, substream, (void *)&host->dma_params);
+
+	ret = clk_enable(host->clk);
+	if (ret)
+		return ret;
+
+	host->running = true;
+	spdif_out_configure(host);
+
+	return 0;
+}
+
+static void spdif_out_shutdown(struct snd_pcm_substream *substream,
+		struct snd_soc_dai *dai)
+{
+	struct spdif_out_dev *host = snd_soc_dai_get_drvdata(dai);
+
+	if (substream->stream != SNDRV_PCM_STREAM_PLAYBACK)
+		return;
+
+	clk_disable(host->clk);
+	host->running = false;
+	snd_soc_dai_set_dma_data(dai, substream, NULL);
+}
+
+static void spdif_out_clock(struct spdif_out_dev *host, u32 core_freq,
+		u32 rate)
+{
+	u32 divider, ctrl;
+
+	clk_set_rate(host->clk, core_freq);
+	divider = DIV_ROUND_CLOSEST(clk_get_rate(host->clk), (rate * 128));
+
+	ctrl = readl(host->io_base + SPDIF_OUT_CTRL);
+	ctrl &= ~SPDIF_DIVIDER_MASK;
+	ctrl |= (divider << SPDIF_DIVIDER_SHIFT) & SPDIF_DIVIDER_MASK;
+	writel(ctrl, host->io_base + SPDIF_OUT_CTRL);
+}
+
+static int spdif_out_hw_params(struct snd_pcm_substream *substream,
+		struct snd_pcm_hw_params *params,
+		struct snd_soc_dai *dai)
+{
+	struct spdif_out_dev *host = snd_soc_dai_get_drvdata(dai);
+	u32 rate, core_freq;
+
+	if (substream->stream != SNDRV_PCM_STREAM_PLAYBACK)
+		return -EINVAL;
+
+	rate = params_rate(params);
+
+	switch (rate) {
+	case 8000:
+	case 16000:
+	case 32000:
+	case 64000:
+		/*
+		 * The clock is multiplied by 10 to bring it to feasible range
+		 * of frequencies for sscg
+		 */
+		core_freq = 64000 * 128 * 10;	/* 81.92 MHz */
+		break;
+	case 5512:
+	case 11025:
+	case 22050:
+	case 44100:
+	case 88200:
+	case 176400:
+		core_freq = 176400 * 128;	/* 22.5792 MHz */
+		break;
+	case 48000:
+	case 96000:
+	case 192000:
+	default:
+		core_freq = 192000 * 128;	/* 24.576 MHz */
+		break;
+	}
+
+	spdif_out_clock(host, core_freq, rate);
+	host->saved_params.core_freq = core_freq;
+	host->saved_params.rate = rate;
+
+	return 0;
+}
+
+static int spdif_out_trigger(struct snd_pcm_substream *substream, int cmd,
+		struct snd_soc_dai *dai)
+{
+	struct spdif_out_dev *host = snd_soc_dai_get_drvdata(dai);
+	u32 ctrl;
+	int ret = 0;
+
+	if (substream->stream != SNDRV_PCM_STREAM_PLAYBACK)
+		return -EINVAL;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+			ctrl = readl(host->io_base + SPDIF_OUT_CTRL);
+			ctrl &= ~SPDIF_OPMODE_MASK;
+			if (!spdif_out_mute)
+				ctrl |= SPDIF_OPMODE_AUD_DATA |
+					SPDIF_STATE_NORMAL;
+			else
+				ctrl |= SPDIF_OPMODE_MUTE_PCM;
+			writel(ctrl, host->io_base + SPDIF_OUT_CTRL);
+		break;
+
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		ctrl = readl(host->io_base + SPDIF_OUT_CTRL);
+		ctrl &= ~SPDIF_OPMODE_MASK;
+		ctrl |= SPDIF_OPMODE_OFF;
+		writel(ctrl, host->io_base + SPDIF_OUT_CTRL);
+		break;
+
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+static int spdif_digital_mute(struct snd_soc_dai *dai, int mute)
+{
+	struct spdif_out_dev *host = snd_soc_dai_get_drvdata(dai);
+	u32 val;
+
+	spdif_out_mute = mute;
+	val = readl(host->io_base + SPDIF_OUT_CTRL);
+	val &= ~SPDIF_OPMODE_MASK;
+
+	if (mute)
+		val |= SPDIF_OPMODE_MUTE_PCM;
+	else {
+		if (host->running)
+			val |= SPDIF_OPMODE_AUD_DATA | SPDIF_STATE_NORMAL;
+		else
+			val |= SPDIF_OPMODE_OFF;
+	}
+
+	writel(val, host->io_base + SPDIF_OUT_CTRL);
+	return 0;
+}
+
+static int spdif_mute_get(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_value *ucontrol)
+{
+	ucontrol->value.integer.value[0] = spdif_out_mute;
+	return 0;
+}
+
+static int spdif_mute_put(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct snd_soc_card *card = codec->card;
+	struct snd_soc_pcm_runtime *rtd = card->rtd;
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+
+	if (spdif_out_mute == ucontrol->value.integer.value[0])
+		return 0;
+
+	spdif_digital_mute(cpu_dai, ucontrol->value.integer.value[0]);
+
+	return 1;
+}
+static const struct snd_kcontrol_new spdif_out_controls[] = {
+	SOC_SINGLE_BOOL_EXT("SPDIF Play Mute", (unsigned long)&spdif_out_mute,
+			spdif_mute_get, spdif_mute_put),
+};
+
+int spdif_soc_dai_probe(struct snd_soc_dai *dai)
+{
+	struct snd_soc_card *card = dai->card;
+	struct snd_soc_pcm_runtime *rtd = card->rtd;
+	struct snd_soc_codec *codec = rtd->codec;
+
+	return snd_soc_add_controls(codec, spdif_out_controls,
+				ARRAY_SIZE(spdif_out_controls));
+}
+
+static struct snd_soc_dai_ops spdif_out_dai_ops = {
+	.digital_mute	= spdif_digital_mute,
+	.startup	= spdif_out_startup,
+	.shutdown	= spdif_out_shutdown,
+	.trigger	= spdif_out_trigger,
+	.hw_params	= spdif_out_hw_params,
+};
+
+struct snd_soc_dai_driver spdif_out_dai = {
+	.playback = {
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
+				 SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000 | \
+				 SNDRV_PCM_RATE_192000),
+		.formats = SNDRV_PCM_FMTBIT_S16_LE,
+	},
+	.probe = spdif_soc_dai_probe,
+	.ops = (struct snd_soc_dai_ops *)&spdif_out_dai_ops,
+};
+
+static int spdif_out_probe(struct platform_device *pdev)
+{
+	struct spdif_out_dev *host;
+	struct spdif_platform_data *pdata;
+	struct resource *res;
+	int ret;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -EINVAL;
+
+	if (!devm_request_mem_region(&pdev->dev, res->start,
+				resource_size(res), pdev->name)) {
+		dev_warn(&pdev->dev, "Failed to get memory resourse\n");
+		return -ENOENT;
+	}
+
+	host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL);
+	if (!host) {
+		dev_warn(&pdev->dev, "kzalloc fail\n");
+		return -ENOMEM;
+	}
+
+	host->io_base = devm_ioremap(&pdev->dev, res->start,
+				resource_size(res));
+	if (!host->io_base) {
+		dev_warn(&pdev->dev, "ioremap failed\n");
+		return -ENOMEM;
+	}
+
+	host->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(host->clk))
+		return PTR_ERR(host->clk);
+
+	pdata = dev_get_platdata(&pdev->dev);
+
+	host->dma_params.data = pdata->dma_params;
+	host->dma_params.addr = res->start + SPDIF_OUT_FIFO_DATA;
+	host->dma_params.max_burst = 16;
+	host->dma_params.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+	host->dma_params.filter = pdata->filter;
+
+	dev_set_drvdata(&pdev->dev, host);
+
+	ret = snd_soc_register_dai(&pdev->dev, &spdif_out_dai);
+	if (ret != 0) {
+		clk_put(host->clk);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int spdif_out_remove(struct platform_device *pdev)
+{
+	struct spdif_out_dev *host = dev_get_drvdata(&pdev->dev);
+
+	snd_soc_unregister_dai(&pdev->dev);
+	dev_set_drvdata(&pdev->dev, NULL);
+
+	clk_put(host->clk);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int spdif_out_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct spdif_out_dev *host = dev_get_drvdata(&pdev->dev);
+
+	if (host->running)
+		clk_disable(host->clk);
+
+	return 0;
+}
+
+static int spdif_out_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct spdif_out_dev *host = dev_get_drvdata(&pdev->dev);
+
+	if (host->running) {
+		clk_enable(host->clk);
+		spdif_out_configure(host);
+		spdif_out_clock(host, host->saved_params.core_freq,
+				host->saved_params.rate);
+	}
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(spdif_out_dev_pm_ops, spdif_out_suspend, \
+		spdif_out_resume);
+
+#define SPDIF_OUT_DEV_PM_OPS (&spdif_out_dev_pm_ops)
+
+#else
+#define SPDIF_OUT_DEV_PM_OPS NULL
+
+#endif
+
+static struct platform_driver spdif_out_driver = {
+	.probe		= spdif_out_probe,
+	.remove		= spdif_out_remove,
+	.driver		= {
+		.name	= "spdif-out",
+		.owner	= THIS_MODULE,
+		.pm	= SPDIF_OUT_DEV_PM_OPS,
+	},
+};
+
+static int __init spdif_out_init(void)
+{
+	return platform_driver_register(&spdif_out_driver);
+}
+module_init(spdif_out_init);
+
+static void __exit spdif_out_exit(void)
+{
+	platform_driver_unregister(&spdif_out_driver);
+}
+module_exit(spdif_out_exit);
+
+MODULE_AUTHOR("Vipin Kumar <vipin.kumar@st.com>");
+MODULE_DESCRIPTION("SPEAr SPDIF OUT SoC Interface");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/spear/spdif_out_regs.h b/sound/soc/spear/spdif_out_regs.h
new file mode 100644
index 0000000..233cc67
--- /dev/null
+++ b/sound/soc/spear/spdif_out_regs.h
@@ -0,0 +1,79 @@
+/*
+ * SPEAr SPDIF OUT controller header file
+ *
+ * Copyright (ST) 2012 Vipin Kumar (vipin.kumar@st.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef SPDIF_OUT_REGS_H
+#define SPDIF_OUT_REGS_H
+
+#define SPDIF_OUT_SOFT_RST	0x00
+	#define SPDIF_OUT_RESET		(1 << 0)
+#define SPDIF_OUT_FIFO_DATA	0x04
+#define SPDIF_OUT_INT_STA	0x08
+#define SPDIF_OUT_INT_STA_CLR	0x0C
+	#define SPDIF_INT_UNDERFLOW	(1 << 0)
+	#define SPDIF_INT_EODATA	(1 << 1)
+	#define SPDIF_INT_EOBLOCK	(1 << 2)
+	#define SPDIF_INT_EOLATENCY	(1 << 3)
+	#define SPDIF_INT_EOPD_DATA	(1 << 4)
+	#define SPDIF_INT_MEMFULLREAD	(1 << 5)
+	#define SPDIF_INT_EOPD_PAUSE	(1 << 6)
+
+#define SPDIF_OUT_INT_EN	0x10
+#define SPDIF_OUT_INT_EN_SET	0x14
+#define SPDIF_OUT_INT_EN_CLR	0x18
+#define SPDIF_OUT_CTRL		0x1C
+	#define SPDIF_OPMODE_MASK	(7 << 0)
+	#define SPDIF_OPMODE_OFF	(0 << 0)
+	#define SPDIF_OPMODE_MUTE_PCM	(1 << 0)
+	#define SPDIF_OPMODE_MUTE_PAUSE	(2 << 0)
+	#define SPDIF_OPMODE_AUD_DATA	(3 << 0)
+	#define SPDIF_OPMODE_ENCODE	(4 << 0)
+	#define SPDIF_STATE_NORMAL	(1 << 3)
+	#define SPDIF_DIVIDER_MASK	(0xff << 5)
+	#define SPDIF_DIVIDER_SHIFT	(5)
+	#define SPDIF_SAMPLEREAD_MASK	(0x1ffff << 15)
+	#define SPDIF_SAMPLEREAD_SHIFT	(15)
+#define SPDIF_OUT_STA		0x20
+#define SPDIF_OUT_PA_PB		0x24
+#define SPDIF_OUT_PC_PD		0x28
+#define SPDIF_OUT_CL1		0x2C
+#define SPDIF_OUT_CR1		0x30
+#define SPDIF_OUT_CL2_CR2_UV	0x34
+#define SPDIF_OUT_PAUSE_LAT	0x38
+#define SPDIF_OUT_FRMLEN_BRST	0x3C
+#define SPDIF_OUT_CFG		0x40
+	#define SPDIF_OUT_MEMFMT_16_0	(0 << 5)
+	#define SPDIF_OUT_MEMFMT_16_16	(1 << 5)
+	#define SPDIF_OUT_VALID_DMA	(0 << 3)
+	#define SPDIF_OUT_VALID_HW	(1 << 3)
+	#define SPDIF_OUT_USER_DMA	(0 << 2)
+	#define SPDIF_OUT_USER_HW	(1 << 2)
+	#define SPDIF_OUT_CHNLSTA_DMA	(0 << 1)
+	#define SPDIF_OUT_CHNLSTA_HW	(1 << 1)
+	#define SPDIF_OUT_PARITY_HW	(0 << 0)
+	#define SPDIF_OUT_PARITY_DMA	(1 << 0)
+	#define SPDIF_OUT_FDMA_TRIG_2	(2 << 8)
+	#define SPDIF_OUT_FDMA_TRIG_6	(6 << 8)
+	#define SPDIF_OUT_FDMA_TRIG_8	(8 << 8)
+	#define SPDIF_OUT_FDMA_TRIG_10	(10 << 8)
+	#define SPDIF_OUT_FDMA_TRIG_12	(12 << 8)
+	#define SPDIF_OUT_FDMA_TRIG_16	(16 << 8)
+	#define SPDIF_OUT_FDMA_TRIG_18	(18 << 8)
+
+#endif /* SPDIF_OUT_REGS_H */
-- 
1.7.2.2

  parent reply	other threads:[~2012-03-20 11:34 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-03-20 11:33 [PATCH 0/8] Add ASoC drivers for SPEAr platform Rajeev Kumar
2012-03-20 11:33 ` [PATCH 1/8] sound:asoc: Add support for STA529 Audio Codec Rajeev Kumar
2012-03-20 15:25   ` Mark Brown
2012-03-23  3:42     ` Rajeev kumar
2012-03-23  9:07       ` Lars-Peter Clausen
2012-03-23  9:20         ` Rajeev kumar
2012-03-20 17:57   ` Lars-Peter Clausen
2012-03-23  4:00     ` Rajeev kumar
2012-03-23  8:51       ` Lars-Peter Clausen
2012-03-23  9:15         ` Rajeev kumar
2012-03-20 11:33 ` [PATCH 2/8] sound:asoc: Add support for synopsys i2s controller as per ASoC framework Rajeev Kumar
2012-03-20 15:44   ` Mark Brown
2012-03-26  9:03     ` Rajeev kumar
2012-03-26 11:10       ` Mark Brown
2012-03-27  3:51         ` Rajeev kumar
2012-03-20 11:33 ` [PATCH 3/8] sound:asoc: Add support for SPEAr ASoC pcm layer Rajeev Kumar
2012-03-20 15:50   ` Mark Brown
2012-03-20 11:33 ` [PATCH 4/8] sound:asoc:spdif_in: Add spdif IN support Rajeev Kumar
2012-03-20 15:55   ` Mark Brown
2012-03-27  9:25     ` Rajeev kumar
2012-03-20 11:33 ` Rajeev Kumar [this message]
2012-03-20 11:33 ` [PATCH 6/8] sound:asoc: Add support for SPEAr ASoC machine driver Rajeev Kumar
2012-03-20 16:00   ` Mark Brown
2012-03-20 11:33 ` [PATCH 7/8] sound:asoc: Add Kconfig and Makefile to support SPEAr audio driver Rajeev Kumar
2012-03-20 11:33 ` [PATCH 8/8] sound:asoc: Update Kconfig and Makefile(sound/soc/) to support SPEAr audio Rajeev Kumar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=742a603d7c5b0381e4f528d6b655a16ecf70721e.1332242166.git.rajeev-dlh.kumar@st.com \
    --to=rajeev-dlh.kumar@st.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@opensource.wolfsonmicro.com \
    --cc=lrg@slimlogic.co.uk \
    --cc=perex@perex.cz \
    --cc=spear-devel@list.st.com \
    --cc=tiwai@suse.de \
    --cc=vipin.kumar@st.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.