Re: [PATCH v3 0/9] Parallel CPU bringup for x86_64

[Paul Menzel <pmenzel@molgen.mpg.de>]

Dear David,


Am 29.12.21 um 14:54 schrieb David Woodhouse:
> On Wed, 2021-12-29 at 14:18 +0100, Paul Menzel wrote:
>>> Or the one in
>>> https://lore.kernel.org/lkml/d4cde50b4aab24612823714dfcbe69bc4bb63b60.camel@infradead.org
>>>
>>> which makes it do nothing except prepare all the CPUs before bringing
>>> them up one at a time?
>>
>> I applied it on top the other one, and it made no difference either.
> 
> It's possible I missed something else in the prepare stage that doesn't
> cope with all CPUs being prepared first.
> 
> My next attempt might be to change the loop in bringup_nonboot_cpus()
> to bring all the CPUs not to the CPUHP_BP_PARALLEL_DYN state(s) but
> instead just bring them to somewhere like CPUHP_RCUTREE_PREP, which is
> somewhere in the middle between CPUHP_OFFLINE and CPUHP_BRINGUP_CPU.
> 
> Then a binary chop search — if that one boots, try maybe
> CPUHP_TOPOLOGY_PREPARE. And if not, try CPUHP_PROFILE_PREPARE. Etc.
> 
>>> My current theory (not that I've spent that much time thinking about it
>>> in the last week) is that there's something about the existing CPU
>>> bringup, possibly a CPU bug or something special about the AMD CPUs,
>>> which is triggered by just making it a little bit *faster*, which is
>>> why bringing them up from kexec (especially in qemu) can cause it too?
>>
>> Would having the serial console enabled make a difference?
>
> Yes. I couldn't make this fail in my EC2 m6a instance (for clean boots;
> I have never managed to kexec it) until I turned off the serial console
> to make things go faster.
> 
>>> Tom seemed to find that it was in load_TR_desc(), so if you could try
>>> this hack on a machine that doesn't magically wink out of existence on
>>> a triplefault before even flushing its serial output, that would be
>>> much appreciated...
> 
>> Unfortunately, no more messages were printed on the serial console.
> 
> I suppose we need to litter those outputs somewhere earlier in the
> trampoline then, perhaps it *isn't* getting to load_TR_desc() in your
> case?
> 
> Will be back online properly next week and can actually provide some of
> the above suggestions in patch form if you're willing to keep testing.

Sorry for replying so late. I saw your v4 patches, and tried commit 
5e3524d21d2a () from your branch `parallel-5.17-part1`. Unfortunately, 
the boot problem still persists on an AMD Ryzen 3 2200 g system, I 
tested with. Please tell, where I should report these results too (here 
or posted v4 patches).

Also, do you have (physical) access to a system with an AMD CPU? If not, 
maybe we can get you one, so it’s more convenient for you to test.


Kind regards,

Paul