* x86/mm: Found insecure W+X mapping at address (ptrval)/0xc00a0000
@ 2018-09-19 6:55 Paul Menzel
2018-09-19 8:09 ` Thomas Gleixner
0 siblings, 1 reply; 23+ messages in thread
From: Paul Menzel @ 2018-09-19 6:55 UTC (permalink / raw)
To: linux-mm, x86
[-- Attachment #1: Type: text/plain, Size: 2068 bytes --]
Dear Linux folks,
With Linux 4.19-rc4+ and `CONFIG_DEBUG_WX=y`, I see the message below on
the ASRock E350M1.
> [ 1.813378] Freeing unused kernel image memory: 1112K
> [ 1.818662] Write protecting the kernel text: 8708k
> [ 1.818987] Write protecting the kernel read-only data: 2864k
> [ 1.818989] NX-protecting the kernel data: 5628k
> [ 1.819265] ------------[ cut here ]------------
> [ 1.819272] x86/mm: Found insecure W+X mapping at address (ptrval)/0xc00a0000
> [ 1.819290] WARNING: CPU: 1 PID: 1 at arch/x86/mm/dump_pagetables.c:283 note_page+0x6c9/0x6f0
> [ 1.819291] Modules linked in:
> [ 1.819300] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.19.0-rc4-00081-geba2d6b34a32 #204
> [ 1.819301] Hardware name: ASROCK E350M1/E350M1, BIOS 4.8-1533-gfcc2950a60 09/18/2018
> [ 1.819306] EIP: note_page+0x6c9/0x6f0
> [ 1.819310] Code: 89 45 d8 eb c6 b9 90 cb 88 c8 e9 e4 fa ff ff 89 54 24 08 89 54 24 04 c7 04 24 0c ce a4 c8 c6 05 66 6e be c8 01 e8 37 64 00 00 <0f> 0b 8b 56 14 e9 15 fa ff ff 8b 46 18 e9 3e fb ff ff 8d 74 26 00
> [ 1.819313] EAX: 00000041 EBX: 80000000 ECX: 00000001 EDX: c8d51008
> [ 1.819315] ESI: f7127f3c EDI: 00000000 EBP: f7127eec ESP: f7127ea8
> [ 1.819318] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00210296
> [ 1.819320] CR0: 80050033 CR2: 00000000 CR3: 08d40000 CR4: 000006f0
> [ 1.819321] Call Trace:
> [ 1.819334] ? set_memory_decrypted+0x10/0x10
> [ 1.819337] ? set_memory_decrypted+0x10/0x10
> [ 1.819341] ptdump_walk_pgd_level_core+0x2b6/0x310
> [ 1.819348] ptdump_walk_pgd_level_checkwx+0x20/0x22
> [ 1.819352] mark_rodata_ro+0x105/0x10d
> [ 1.819357] ? rest_init+0x8a/0x8a
> [ 1.819359] kernel_init+0x34/0xe5
> [ 1.819363] ret_from_fork+0x1c/0x38
> [ 1.819367] ---[ end trace 4e9dc382e734b1d8 ]---
> [ 1.819834] x86/mm: Checked W+X mappings: FAILED, 96 W+X pages found.
Please find the full log attached.
I do not notice any problems with the system, but maybe something can be
done to get rid of these.
Kind regards,
Paul
[-- Attachment #2: 20180919–linux_4.19-rc4–master.txt --]
[-- Type: text/plain, Size: 119686 bytes --]
[ 0.000000] Linux version 4.19.0-rc4-00081-geba2d6b34a32 (root@4ed78d5cbcf5) (gcc version 8.1.0 (Debian 8.1.0-11)) #204 SMP Wed Sep 19 05:58:56 UTC 2018
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7d3dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c7d3e000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable
[ 0.000000] kmemleak: Kernel memory leak detector disabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASROCK E350M1/E350M1, BIOS 4.8-1533-gfcc2950a60 09/18/2018
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1600.001 MHz processor
[ 0.007813] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.007819] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.007829] last_pfn = 0x11f000 max_arch_pfn = 0x1000000
[ 0.007839] MTRR default type: uncachable
[ 0.007841] MTRR fixed ranges enabled:
[ 0.007845] 00000-9FFFF write-back
[ 0.007847] A0000-BFFFF uncachable
[ 0.007849] C0000-FFFFF write-back
[ 0.007851] MTRR variable ranges enabled:
[ 0.007855] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.007858] 1 base 0C0000000 mask FF8000000 write-back
[ 0.007861] 2 base 080000000 mask FC0000000 write-back
[ 0.007863] 3 base 000000000 mask F80000000 write-back
[ 0.007864] 4 disabled
[ 0.007866] 5 disabled
[ 0.007867] 6 disabled
[ 0.007869] 7 disabled
[ 0.007871] TOM2: 000000011f000000 aka 4592M
[ 0.008068] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.008365] Scanning 1 areas for low memory corruption
[ 0.008371] initial memory mapped: [mem 0x00000000-0x093fffff]
[ 0.008379] Base memory trampoline at [(ptrval)] 9b000 size 16384
[ 0.008537] BRK [0x08e28000, 0x08e28fff] PGTABLE
[ 0.008560] BRK [0x08e29000, 0x08e29fff] PGTABLE
[ 0.008573] ACPI: Early table checksum verification disabled
[ 0.008733] ACPI: RSDP 0x00000000000F6810 000024 (v02 CORE )
[ 0.008741] ACPI: XSDT 0x00000000C7D510E0 000064 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.008755] ACPI: FACP 0x00000000C7D53840 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
[ 0.008769] ACPI: DSDT 0x00000000C7D51280 0025B6 (v02 ASROCK COREBOOT 00010001 INTL 20180810)
[ 0.008777] ACPI: FACS 0x00000000C7D51240 000040
[ 0.008782] ACPI: FACS 0x00000000C7D51240 000040
[ 0.008788] ACPI: SSDT 0x00000000C7D53940 00008A (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.008795] ACPI: TCPA 0x00000000C7D539D0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.008801] ACPI: APIC 0x00000000C7D53A10 00005C (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.008807] ACPI: HEST 0x00000000C7D53A70 000028 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.008814] ACPI: SSDT 0x00000000C7D53AA0 00168E (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.008821] ACPI: SSDT 0x00000000C7D55130 0003DE (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.008828] ACPI: HPET 0x00000000C7D55510 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.008847] ACPI: Local APIC address 0xfee00000
[ 0.008854] 3706MB HIGHMEM available.
[ 0.008859] 885MB LOWMEM available.
[ 0.008861] mapped low ram: 0 - 375fe000
[ 0.008862] low ram: 0 - 375fe000
[ 0.008878] BRK [0x08e2a000, 0x08e2afff] PGTABLE
[ 0.019749] Zone ranges:
[ 0.019752] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.019756] Normal [mem 0x0000000001000000-0x00000000375fdfff]
[ 0.019759] HighMem [mem 0x00000000375fe000-0x000000011effffff]
[ 0.019761] Movable zone start for each node
[ 0.019762] Early memory node ranges
[ 0.019764] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.019766] node 0: [mem 0x0000000000100000-0x00000000c7d3dfff]
[ 0.019768] node 0: [mem 0x0000000100000000-0x000000011effffff]
[ 0.023755] Reserved but unavailable: 99108 pages
[ 0.023761] Initmem setup node 0 [mem 0x0000000000001000-0x000000011effffff]
[ 0.023766] On node 0 totalpages: 945372
[ 0.023769] DMA zone: 40 pages used for memmap
[ 0.023770] DMA zone: 0 pages reserved
[ 0.023772] DMA zone: 3998 pages, LIFO batch:0
[ 0.023988] Normal zone: 2175 pages used for memmap
[ 0.023990] Normal zone: 222718 pages, LIFO batch:63
[ 0.035549] HighMem zone: 718656 pages, LIFO batch:63
[ 0.079066] Using APIC driver default
[ 0.079343] ACPI: Local APIC address 0xfee00000
[ 0.079367] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.079373] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.079377] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.079379] ACPI: IRQ0 used by override.
[ 0.079382] ACPI: IRQ9 used by override.
[ 0.079386] Using ACPI (MADT) for SMP configuration information
[ 0.079389] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.079403] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.079429] [mem 0xe0000000-0xf7ffffff] available for PCI devices
[ 0.079437] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.079472] random: get_random_bytes called from start_kernel+0x7d/0x44e with crng_init=0
[ 0.079490] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.079730] percpu: Embedded 29 pages/cpu @(ptrval) s89996 r0 d28788 u118784
[ 0.079742] pcpu-alloc: s89996 r0 d28788 u118784 alloc=29*4096
[ 0.079745] pcpu-alloc: [0] 0 [0] 1
[ 0.079777] Built 1 zonelists, mobility grouping on. Total pages: 943157
[ 0.079783] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-rc4-00081-geba2d6b34a32 root=/dev/sda1 ro noisapnp cryptomgr.notests quiet initcall_debug init=/lib/systemd/systemd-bootchart memory_corruption_check=1 memory_corruption_check_size=512k memory_corruption_check_period=5 iomem=relaxed apparmor=0 selinux=0 kmemleak=off initcall_blacklist=tracer_init_tracefs,serial8250_init
[ 0.080165] blacklisting initcall tracer_init_tracefs
[ 0.080172] blacklisting initcall serial8250_init
[ 0.080457] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.080648] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.080659] Initializing CPU#0
[ 0.080671] Initializing HighMem for node 0 (000375fe:0011f000)
[ 0.278468] Initializing Movable for node 0 (00000000:00000000)
[ 0.287769] Memory: 3712176K/3781488K available (8704K kernel code, 756K rwdata, 2840K rodata, 1112K init, 644K bss, 69312K reserved, 0K cma-reserved, 2874624K highmem)
[ 0.287780] virtual kernel memory layout:
fixmap : 0xfff8f000 - 0xfffff000 ( 448 kB)
cpu_entry : 0xffa00000 - 0xffa4f000 ( 316 kB)
pkmap : 0xff600000 - 0xff800000 (2048 kB)
vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
.init : 0xc8c1d000 - 0xc8d33000 (1112 kB)
.data : 0xc88803dc - 0xc8c0b100 (3627 kB)
.text : 0xc8000000 - 0xc88803dc (8704 kB)
[ 0.287781] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.288084] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.288090] ftrace: allocating 33652 entries in 66 pages
[ 0.316690] rcu: Hierarchical RCU implementation.
[ 0.316693] rcu: RCU event tracing is enabled.
[ 0.322763] NR_IRQS: 2304, nr_irqs: 440, preallocated irqs: 16
[ 0.323275] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval)
[ 0.323342] spurious 8259A interrupt: IRQ7.
[ 0.323356] calling con_init+0x0/0x1e3 @ 0
[ 0.325786] Console: colour VGA+ 80x25
[ 0.325795] console [tty0] enabled
[ 0.325799] initcall con_init+0x0/0x1e3 returned 0 after 0 usecs
[ 0.325803] calling univ8250_console_init+0x0/0x2a @ 0
[ 0.325812] initcall univ8250_console_init+0x0/0x2a returned 0 after 0 usecs
[ 0.325854] ACPI: Core revision 20180810
[ 0.326269] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.326289] hpet clockevent registered
[ 0.326299] APIC: Switch to symmetric I/O mode setup
[ 0.326301] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.326926] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.331367] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x17102604879, max_idle_ns: 440795272763 ns
[ 0.331385] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.00 BogoMIPS (lpj=1600001)
[ 0.331392] pid_max: default: 32768 minimum: 301
[ 0.331482] Security Framework initialized
[ 0.331485] Yama: becoming mindful.
[ 0.331499] calling selinux_init+0x0/0x1c3 @ 0
[ 0.331502] SELinux: Disabled at boot.
[ 0.331505] initcall selinux_init+0x0/0x1c3 returned 0 after 0 usecs
[ 0.331536] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.331543] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.331980] mce: CPU supports 6 MCE banks
[ 0.331998] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.331999] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[ 0.332006] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.332008] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.332009] Speculative Store Bypass: Vulnerable
[ 0.332243] Freeing SMP alternatives memory: 32K
[ 0.434370] smpboot: CPU0: AMD E-350D APU with Radeon(tm) HD Graphics (family: 0x14, model: 0x2, stepping: 0x0)
[ 0.434370] calling trace_init_flags_sys_enter+0x0/0x13 @ 1
[ 0.434370] initcall trace_init_flags_sys_enter+0x0/0x13 returned 0 after 0 usecs
[ 0.434370] calling trace_init_flags_sys_exit+0x0/0x13 @ 1
[ 0.434370] initcall trace_init_flags_sys_exit+0x0/0x13 returned 0 after 0 usecs
[ 0.434370] calling init_hw_perf_events+0x0/0x5bd @ 1
[ 0.434370] Performance Events: AMD PMU driver.
[ 0.434370] ... version: 0
[ 0.434370] ... bit width: 48
[ 0.434370] ... generic registers: 4
[ 0.434370] ... value mask: 0000ffffffffffff
[ 0.434370] ... max period: 00007fffffffffff
[ 0.434370] ... fixed-purpose events: 0
[ 0.434370] ... event mask: 000000000000000f
[ 0.434370] initcall init_hw_perf_events+0x0/0x5bd returned 0 after 0 usecs
[ 0.434370] calling init_real_mode+0x0/0x108 @ 1
[ 0.434370] initcall init_real_mode+0x0/0x108 returned 0 after 0 usecs
[ 0.434370] calling trace_init_perf_perm_irq_work_exit+0x0/0x16 @ 1
[ 0.434370] initcall trace_init_perf_perm_irq_work_exit+0x0/0x16 returned 0 after 0 usecs
[ 0.434370] calling validate_x2apic+0x0/0x49 @ 1
[ 0.434370] initcall validate_x2apic+0x0/0x49 returned 0 after 0 usecs
[ 0.434370] calling register_nmi_cpu_backtrace_handler+0x0/0x18 @ 1
[ 0.434370] initcall register_nmi_cpu_backtrace_handler+0x0/0x18 returned 0 after 0 usecs
[ 0.434370] calling spawn_ksoftirqd+0x0/0x39 @ 1
[ 0.434370] initcall spawn_ksoftirqd+0x0/0x39 returned 0 after 0 usecs
[ 0.434370] calling migration_init+0x0/0x31 @ 1
[ 0.434370] initcall migration_init+0x0/0x31 returned 0 after 0 usecs
[ 0.434370] calling check_cpu_stall_init+0x0/0x1b @ 1
[ 0.434370] initcall check_cpu_stall_init+0x0/0x1b returned 0 after 0 usecs
[ 0.434370] calling srcu_bootup_announce+0x0/0x30 @ 1
[ 0.434370] rcu: Hierarchical SRCU implementation.
[ 0.434370] initcall srcu_bootup_announce+0x0/0x30 returned 0 after 0 usecs
[ 0.434370] calling rcu_spawn_gp_kthread+0x0/0xfc @ 1
[ 0.434370] initcall rcu_spawn_gp_kthread+0x0/0xfc returned 0 after 0 usecs
[ 0.434370] calling cpu_stop_init+0x0/0x78 @ 1
[ 0.434370] initcall cpu_stop_init+0x0/0x78 returned 0 after 0 usecs
[ 0.434370] calling init_events+0x0/0x3a @ 1
[ 0.434370] initcall init_events+0x0/0x3a returned 0 after 0 usecs
[ 0.434370] calling init_trace_printk+0x0/0xf @ 1
[ 0.434370] initcall init_trace_printk+0x0/0xf returned 0 after 0 usecs
[ 0.434370] calling event_trace_enable_again+0x0/0x21 @ 1
[ 0.434370] initcall event_trace_enable_again+0x0/0x21 returned 0 after 0 usecs
[ 0.434370] calling jump_label_init_module+0x0/0x14 @ 1
[ 0.434370] initcall jump_label_init_module+0x0/0x14 returned 0 after 0 usecs
[ 0.434370] calling dynamic_debug_init+0x0/0x211 @ 1
[ 0.434570] initcall dynamic_debug_init+0x0/0x211 returned 0 after 976 usecs
[ 0.434576] calling rand_initialize+0x0/0x110 @ 1
[ 0.434657] initcall rand_initialize+0x0/0x110 returned 0 after 0 usecs
[ 0.434663] calling initialize_ptr_random+0x0/0x47 @ 1
[ 0.434668] initcall initialize_ptr_random+0x0/0x47 returned 0 after 0 usecs
[ 0.434764] smp: Bringing up secondary CPUs ...
[ 0.434997] CPU 1 irqstacks, hard=(ptrval) soft=(ptrval)
[ 0.435000] x86: Booting SMP configuration:
[ 0.435002] .... node #0, CPUs: #1
[ 0.004073] Initializing CPU#1
[ 0.004073] do_IRQ: 1.55 No irq handler for vector
[ 0.436379] smp: Brought up 1 node, 2 CPUs
[ 0.436380] smpboot: Max logical packages: 1
[ 0.436383] smpboot: Total of 2 processors activated (6400.00 BogoMIPS)
[ 0.437477] devtmpfs: initialized
[ 0.437939] calling ipc_ns_init+0x0/0x48 @ 1
[ 0.437959] initcall ipc_ns_init+0x0/0x48 returned 0 after 0 usecs
[ 0.437963] calling init_mmap_min_addr+0x0/0x27 @ 1
[ 0.437966] initcall init_mmap_min_addr+0x0/0x27 returned 0 after 0 usecs
[ 0.437970] calling net_ns_init+0x0/0xdc @ 1
[ 0.438112] initcall net_ns_init+0x0/0xdc returned 0 after 0 usecs
[ 0.438112] calling e820__register_nvs_regions+0x0/0x3e @ 1
[ 0.438112] initcall e820__register_nvs_regions+0x0/0x3e returned 0 after 0 usecs
[ 0.438112] calling cpufreq_register_tsc_scaling+0x0/0x2a @ 1
[ 0.438112] initcall cpufreq_register_tsc_scaling+0x0/0x2a returned 0 after 0 usecs
[ 0.438112] calling init_cpu_syscore+0x0/0x11 @ 1
[ 0.438112] initcall init_cpu_syscore+0x0/0x11 returned 0 after 0 usecs
[ 0.438112] calling reboot_init+0x0/0x22 @ 1
[ 0.438112] initcall reboot_init+0x0/0x22 returned 0 after 0 usecs
[ 0.438112] calling init_lapic_sysfs+0x0/0x24 @ 1
[ 0.438112] initcall init_lapic_sysfs+0x0/0x24 returned 0 after 0 usecs
[ 0.438112] calling pgd_cache_init+0x0/0x35 @ 1
[ 0.438112] initcall pgd_cache_init+0x0/0x35 returned 0 after 0 usecs
[ 0.438112] calling alloc_frozen_cpus+0x0/0xc @ 1
[ 0.438112] initcall alloc_frozen_cpus+0x0/0xc returned 0 after 0 usecs
[ 0.438112] calling cpu_hotplug_pm_sync_init+0x0/0x16 @ 1
[ 0.438112] initcall cpu_hotplug_pm_sync_init+0x0/0x16 returned 0 after 0 usecs
[ 0.438112] calling wq_sysfs_init+0x0/0x29 @ 1
[ 0.438112] initcall wq_sysfs_init+0x0/0x29 returned 0 after 0 usecs
[ 0.438112] calling ksysfs_init+0x0/0x7d @ 1
[ 0.438112] initcall ksysfs_init+0x0/0x7d returned 0 after 0 usecs
[ 0.438112] calling pm_init+0x0/0x63 @ 1
[ 0.438385] initcall pm_init+0x0/0x63 returned 0 after 0 usecs
[ 0.438385] calling rcu_set_runtime_mode+0x0/0x16 @ 1
[ 0.438385] initcall rcu_set_runtime_mode+0x0/0x16 returned 0 after 0 usecs
[ 0.438385] calling init_jiffies_clocksource+0x0/0x1b @ 1
[ 0.438385] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.438385] initcall init_jiffies_clocksource+0x0/0x1b returned 0 after 0 usecs
[ 0.438385] calling futex_init+0x0/0xd5 @ 1
[ 0.438385] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.438385] initcall futex_init+0x0/0xd5 returned 0 after 0 usecs
[ 0.438385] calling cgroup_wq_init+0x0/0x2c @ 1
[ 0.438385] initcall cgroup_wq_init+0x0/0x2c returned 0 after 0 usecs
[ 0.438385] calling cgroup1_wq_init+0x0/0x2c @ 1
[ 0.438385] initcall cgroup1_wq_init+0x0/0x2c returned 0 after 0 usecs
[ 0.438385] calling ftrace_mod_cmd_init+0x0/0xf @ 1
[ 0.438385] initcall ftrace_mod_cmd_init+0x0/0xf returned 0 after 0 usecs
[ 0.438385] calling init_wakeup_tracer+0x0/0x2b @ 1
[ 0.438385] initcall init_wakeup_tracer+0x0/0x2b returned 0 after 0 usecs
[ 0.438385] calling init_graph_trace+0x0/0x5a @ 1
[ 0.438385] initcall init_graph_trace+0x0/0x5a returned 0 after 0 usecs
[ 0.438385] calling init_per_zone_wmark_min+0x0/0x66 @ 1
[ 0.438385] initcall init_per_zone_wmark_min+0x0/0x66 returned 0 after 0 usecs
[ 0.438385] calling init_zero_pfn+0x0/0x47 @ 1
[ 0.438385] initcall init_zero_pfn+0x0/0x47 returned 0 after 0 usecs
[ 0.438385] calling cma_init_reserved_areas+0x0/0x170 @ 1
[ 0.438385] initcall cma_init_reserved_areas+0x0/0x170 returned 0 after 0 usecs
[ 0.438385] calling fsnotify_init+0x0/0x44 @ 1
[ 0.438385] initcall fsnotify_init+0x0/0x44 returned 0 after 0 usecs
[ 0.438385] calling filelock_init+0x0/0x7f @ 1
[ 0.438385] initcall filelock_init+0x0/0x7f returned 0 after 0 usecs
[ 0.438385] calling init_script_binfmt+0x0/0x18 @ 1
[ 0.438385] initcall init_script_binfmt+0x0/0x18 returned 0 after 0 usecs
[ 0.438385] calling init_elf_binfmt+0x0/0x18 @ 1
[ 0.438385] initcall init_elf_binfmt+0x0/0x18 returned 0 after 0 usecs
[ 0.438385] calling configfs_init+0x0/0x88 @ 1
[ 0.438385] initcall configfs_init+0x0/0x88 returned 0 after 0 usecs
[ 0.438385] calling debugfs_init+0x0/0x4b @ 1
[ 0.438385] initcall debugfs_init+0x0/0x4b returned 0 after 0 usecs
[ 0.438385] calling tracefs_init+0x0/0x39 @ 1
[ 0.438385] initcall tracefs_init+0x0/0x39 returned 0 after 0 usecs
[ 0.438385] calling securityfs_init+0x0/0x63 @ 1
[ 0.438385] initcall securityfs_init+0x0/0x63 returned 0 after 0 usecs
[ 0.438385] calling prandom_init+0x0/0xb1 @ 1
[ 0.438385] initcall prandom_init+0x0/0xb1 returned 0 after 0 usecs
[ 0.438385] calling pinctrl_init+0x0/0x9d @ 1
[ 0.438385] pinctrl core: initialized pinctrl subsystem
[ 0.438385] initcall pinctrl_init+0x0/0x9d returned 0 after 0 usecs
[ 0.438385] calling gpiolib_dev_init+0x0/0xb3 @ 1
[ 0.438385] initcall gpiolib_dev_init+0x0/0xb3 returned 0 after 0 usecs
[ 0.438385] calling component_debug_init+0x0/0x1d @ 1
[ 0.438385] initcall component_debug_init+0x0/0x1d returned 0 after 0 usecs
[ 0.438385] calling early_resume_init+0x0/0xf0 @ 1
[ 0.438385] RTC time: 6:09:45, date: 09/19/18
[ 0.438385] initcall early_resume_init+0x0/0xf0 returned 0 after 0 usecs
[ 0.438385] calling opp_debug_init+0x0/0x39 @ 1
[ 0.438385] initcall opp_debug_init+0x0/0x39 returned 0 after 0 usecs
[ 0.438385] calling cpufreq_core_init+0x0/0x46 @ 1
[ 0.438385] initcall cpufreq_core_init+0x0/0x46 returned 0 after 0 usecs
[ 0.438385] calling cpuidle_init+0x0/0x3b @ 1
[ 0.438385] initcall cpuidle_init+0x0/0x3b returned 0 after 0 usecs
[ 0.438385] calling bsp_pm_check_init+0x0/0x16 @ 1
[ 0.438385] initcall bsp_pm_check_init+0x0/0x16 returned 0 after 0 usecs
[ 0.438385] calling sock_init+0x0/0x8e @ 1
[ 0.438399] initcall sock_init+0x0/0x8e returned 0 after 0 usecs
[ 0.438404] calling net_inuse_init+0x0/0x24 @ 1
[ 0.438411] initcall net_inuse_init+0x0/0x24 returned 0 after 0 usecs
[ 0.438415] calling net_defaults_init+0x0/0x24 @ 1
[ 0.438419] initcall net_defaults_init+0x0/0x24 returned 0 after 0 usecs
[ 0.438423] calling init_default_flow_dissectors+0x0/0x48 @ 1
[ 0.438427] initcall init_default_flow_dissectors+0x0/0x48 returned 0 after 0 usecs
[ 0.438430] calling netpoll_init+0x0/0x34 @ 1
[ 0.438433] initcall netpoll_init+0x0/0x34 returned 0 after 0 usecs
[ 0.438438] calling netlink_proto_init+0x0/0x123 @ 1
[ 0.438479] NET: Registered protocol family 16
[ 0.438503] initcall netlink_proto_init+0x0/0x123 returned 0 after 0 usecs
[ 0.438727] calling irq_sysfs_init+0x0/0x7e @ 1
[ 0.438872] initcall irq_sysfs_init+0x0/0x7e returned 0 after 0 usecs
[ 0.438877] calling audit_init+0x0/0x164 @ 1
[ 0.438884] audit: initializing netlink subsys (disabled)
[ 0.439454] initcall audit_init+0x0/0x164 returned 0 after 0 usecs
[ 0.439454] audit: type=2000 audit(1537337385.113:1): state=initialized audit_enabled=0 res=1
[ 0.439454] calling release_early_probes+0x0/0x36 @ 1
[ 0.439456] initcall release_early_probes+0x0/0x36 returned 0 after 0 usecs
[ 0.439461] calling bdi_class_init+0x0/0x41 @ 1
[ 0.439503] initcall bdi_class_init+0x0/0x41 returned 0 after 0 usecs
[ 0.439507] calling mm_sysfs_init+0x0/0x27 @ 1
[ 0.439515] initcall mm_sysfs_init+0x0/0x27 returned 0 after 0 usecs
[ 0.439519] calling gpiolib_sysfs_init+0x0/0x85 @ 1
[ 0.439533] initcall gpiolib_sysfs_init+0x0/0x85 returned 0 after 0 usecs
[ 0.439537] calling pcibus_class_init+0x0/0x19 @ 1
[ 0.439546] initcall pcibus_class_init+0x0/0x19 returned 0 after 0 usecs
[ 0.439550] calling pci_driver_init+0x0/0x22 @ 1
[ 0.439580] initcall pci_driver_init+0x0/0x22 returned 0 after 0 usecs
[ 0.439584] calling backlight_class_init+0x0/0x91 @ 1
[ 0.439593] initcall backlight_class_init+0x0/0x91 returned 0 after 0 usecs
[ 0.439597] calling tty_class_init+0x0/0x30 @ 1
[ 0.439605] initcall tty_class_init+0x0/0x30 returned 0 after 0 usecs
[ 0.439608] calling vtconsole_class_init+0x0/0xc0 @ 1
[ 0.439655] initcall vtconsole_class_init+0x0/0xc0 returned 0 after 0 usecs
[ 0.439660] calling wakeup_sources_debugfs_init+0x0/0x24 @ 1
[ 0.439668] initcall wakeup_sources_debugfs_init+0x0/0x24 returned 0 after 0 usecs
[ 0.439672] calling regmap_initcall+0x0/0x11 @ 1
[ 0.439679] initcall regmap_initcall+0x0/0x11 returned 0 after 0 usecs
[ 0.439683] calling i2c_init+0x0/0xa5 @ 1
[ 0.440387] initcall i2c_init+0x0/0xa5 returned 0 after 976 usecs
[ 0.440393] calling init_menu+0x0/0x14 @ 1
[ 0.440433] cpuidle: using governor menu
[ 0.440433] initcall init_menu+0x0/0x14 returned 0 after 0 usecs
[ 0.440433] calling pcc_init+0x0/0x2e4 @ 1
[ 0.440433] initcall pcc_init+0x0/0x2e4 returned -19 after 0 usecs
[ 0.440433] calling amd_postcore_init+0x0/0xf2 @ 1
[ 0.440505] initcall amd_postcore_init+0x0/0xf2 returned 0 after 0 usecs
[ 0.440505] calling kobject_uevent_init+0x0/0xf @ 1
[ 0.440505] initcall kobject_uevent_init+0x0/0xf returned 0 after 0 usecs
[ 0.440652] calling bts_init+0x0/0xae @ 1
[ 0.440655] initcall bts_init+0x0/0xae returned -19 after 0 usecs
[ 0.440659] calling pt_init+0x0/0x2f9 @ 1
[ 0.440662] initcall pt_init+0x0/0x2f9 returned -19 after 0 usecs
[ 0.440667] calling boot_params_ksysfs_init+0x0/0x216 @ 1
[ 0.440687] initcall boot_params_ksysfs_init+0x0/0x216 returned 0 after 0 usecs
[ 0.440691] calling sbf_init+0x0/0xc8 @ 1
[ 0.440694] initcall sbf_init+0x0/0xc8 returned 0 after 0 usecs
[ 0.440699] calling arch_kdebugfs_init+0x0/0x23 @ 1
[ 0.440717] initcall arch_kdebugfs_init+0x0/0x23 returned 0 after 0 usecs
[ 0.440721] calling init_pit_clocksource+0x0/0x37 @ 1
[ 0.440725] initcall init_pit_clocksource+0x0/0x37 returned 0 after 0 usecs
[ 0.440730] calling intel_pconfig_init+0x0/0xbb @ 1
[ 0.440734] initcall intel_pconfig_init+0x0/0xbb returned 0 after 0 usecs
[ 0.440738] calling mtrr_if_init+0x0/0x51 @ 1
[ 0.440747] initcall mtrr_if_init+0x0/0x51 returned 0 after 0 usecs
[ 0.440751] calling ffh_cstate_init+0x0/0x2d @ 1
[ 0.440763] initcall ffh_cstate_init+0x0/0x2d returned 0 after 0 usecs
[ 0.440768] calling kdump_buf_page_init+0x0/0x3b @ 1
[ 0.440772] initcall kdump_buf_page_init+0x0/0x3b returned 0 after 0 usecs
[ 0.440776] calling acpi_pci_init+0x0/0x5b @ 1
[ 0.440779] ACPI: bus type PCI registered
[ 0.440784] initcall acpi_pci_init+0x0/0x5b returned 0 after 0 usecs
[ 0.440787] calling dma_channel_table_init+0x0/0xc2 @ 1
[ 0.440798] initcall dma_channel_table_init+0x0/0xc2 returned 0 after 0 usecs
[ 0.440801] calling dma_bus_init+0x0/0x91 @ 1
[ 0.440837] initcall dma_bus_init+0x0/0x91 returned 0 after 0 usecs
[ 0.440842] calling dmi_id_init+0x0/0x2b8 @ 1
[ 0.440915] initcall dmi_id_init+0x0/0x2b8 returned 0 after 0 usecs
[ 0.440919] calling pci_arch_init+0x0/0x6b @ 1
[ 0.441062] PCI: PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[ 0.441062] PCI: PCI BIOS revision 2.10 entry at 0xffa40, last bus=3
[ 0.441062] PCI: Using configuration type 1 for base access
[ 0.441062] PCI: Using configuration type 1 for extended access
[ 0.441062] initcall pci_arch_init+0x0/0x6b returned 0 after 976 usecs
[ 0.441271] calling fixup_ht_bug+0x0/0x8e @ 1
[ 0.441274] initcall fixup_ht_bug+0x0/0x8e returned 0 after 0 usecs
[ 0.441278] calling topology_init+0x0/0x30 @ 1
[ 0.441425] initcall topology_init+0x0/0x30 returned 0 after 976 usecs
[ 0.441430] calling mtrr_init_finialize+0x0/0x41 @ 1
[ 0.441433] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.441434] mtrr: probably your BIOS does not setup all CPUs.
[ 0.441435] mtrr: corrected configuration.
[ 0.441439] initcall mtrr_init_finialize+0x0/0x41 returned 0 after 0 usecs
[ 0.441442] calling uid_cache_init+0x0/0x7b @ 1
[ 0.441450] initcall uid_cache_init+0x0/0x7b returned 0 after 0 usecs
[ 0.441453] calling param_sysfs_init+0x0/0x196 @ 1
[ 0.444971] initcall param_sysfs_init+0x0/0x196 returned 0 after 2929 usecs
[ 0.444975] calling user_namespace_sysctl_init+0x0/0x40 @ 1
[ 0.444999] initcall user_namespace_sysctl_init+0x0/0x40 returned 0 after 0 usecs
[ 0.445002] calling proc_schedstat_init+0x0/0x23 @ 1
[ 0.445009] initcall proc_schedstat_init+0x0/0x23 returned 0 after 0 usecs
[ 0.445012] calling pm_sysrq_init+0x0/0x1b @ 1
[ 0.445436] initcall pm_sysrq_init+0x0/0x1b returned 0 after 0 usecs
[ 0.445436] calling create_proc_profile+0x0/0x100 @ 1
[ 0.445436] initcall create_proc_profile+0x0/0x100 returned 0 after 0 usecs
[ 0.445436] calling crash_save_vmcoreinfo_init+0x0/0x4e1 @ 1
[ 0.445448] initcall crash_save_vmcoreinfo_init+0x0/0x4e1 returned 0 after 0 usecs
[ 0.445453] calling crash_notes_memory_init+0x0/0x36 @ 1
[ 0.445466] initcall crash_notes_memory_init+0x0/0x36 returned 0 after 0 usecs
[ 0.445470] calling cgroup_sysfs_init+0x0/0x19 @ 1
[ 0.445480] initcall cgroup_sysfs_init+0x0/0x19 returned 0 after 0 usecs
[ 0.445484] calling cgroup_namespaces_init+0x0/0xc @ 1
[ 0.445488] initcall cgroup_namespaces_init+0x0/0xc returned 0 after 0 usecs
[ 0.445492] calling user_namespaces_init+0x0/0x2c @ 1
[ 0.445522] initcall user_namespaces_init+0x0/0x2c returned 0 after 0 usecs
[ 0.445526] calling dev_map_init+0x0/0x16 @ 1
[ 0.445532] initcall dev_map_init+0x0/0x16 returned 0 after 0 usecs
[ 0.445536] calling stack_map_init+0x0/0x40 @ 1
[ 0.445539] initcall stack_map_init+0x0/0x40 returned 0 after 0 usecs
[ 0.445542] calling oom_init+0x0/0x2e @ 1
[ 0.446395] initcall oom_init+0x0/0x2e returned 0 after 976 usecs
[ 0.446405] calling default_bdi_init+0x0/0xa7 @ 1
[ 0.446475] initcall default_bdi_init+0x0/0xa7 returned 0 after 0 usecs
[ 0.446480] calling cgwb_init+0x0/0x2c @ 1
[ 0.446494] initcall cgwb_init+0x0/0x2c returned 0 after 0 usecs
[ 0.446498] calling percpu_enable_async+0x0/0x13 @ 1
[ 0.446502] initcall percpu_enable_async+0x0/0x13 returned 0 after 0 usecs
[ 0.446507] calling kcompactd_init+0x0/0x49 @ 1
[ 0.446520] initcall kcompactd_init+0x0/0x49 returned 0 after 0 usecs
[ 0.446520] calling init_user_reserve+0x0/0x40 @ 1
[ 0.446520] initcall init_user_reserve+0x0/0x40 returned 0 after 0 usecs
[ 0.446520] calling init_admin_reserve+0x0/0x40 @ 1
[ 0.446520] initcall init_admin_reserve+0x0/0x40 returned 0 after 0 usecs
[ 0.446520] calling init_reserve_notifier+0x0/0x3 @ 1
[ 0.446520] initcall init_reserve_notifier+0x0/0x3 returned 0 after 0 usecs
[ 0.446520] calling swap_init_sysfs+0x0/0x5d @ 1
[ 0.446520] initcall swap_init_sysfs+0x0/0x5d returned 0 after 0 usecs
[ 0.446520] calling swapfile_init+0x0/0x40 @ 1
[ 0.446520] initcall swapfile_init+0x0/0x40 returned 0 after 0 usecs
[ 0.446520] calling hugetlb_init+0x0/0x3ba @ 1
[ 0.446520] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.446520] initcall hugetlb_init+0x0/0x3ba returned 0 after 0 usecs
[ 0.446520] calling ksm_init+0x0/0x154 @ 1
[ 0.446520] initcall ksm_init+0x0/0x154 returned 0 after 0 usecs
[ 0.446520] calling hugepage_init+0x0/0x12e @ 1
[ 0.446520] initcall hugepage_init+0x0/0x12e returned 0 after 0 usecs
[ 0.446520] calling mem_cgroup_init+0x0/0xc0 @ 1
[ 0.446520] initcall mem_cgroup_init+0x0/0xc0 returned 0 after 0 usecs
[ 0.446520] calling mem_cgroup_swap_init+0x0/0x4e @ 1
[ 0.446520] initcall mem_cgroup_swap_init+0x0/0x4e returned 0 after 0 usecs
[ 0.446520] calling sel_ib_pkey_init+0x0/0x30 @ 1
[ 0.446520] initcall sel_ib_pkey_init+0x0/0x30 returned 0 after 0 usecs
[ 0.446520] calling crypto_wq_init+0x0/0x2c @ 1
[ 0.446520] initcall crypto_wq_init+0x0/0x2c returned 0 after 0 usecs
[ 0.446520] calling cryptomgr_init+0x0/0x14 @ 1
[ 0.446520] initcall cryptomgr_init+0x0/0x14 returned 0 after 0 usecs
[ 0.446520] calling cryptd_init+0x0/0xa2 @ 1
[ 0.446520] cryptd: max_cpu_qlen set to 1000
[ 0.446520] initcall cryptd_init+0x0/0xa2 returned 0 after 0 usecs
[ 0.446520] calling init_bio+0x0/0xbe @ 1
[ 0.446568] initcall init_bio+0x0/0xbe returned 0 after 0 usecs
[ 0.446568] calling blk_settings_init+0x0/0x22 @ 1
[ 0.446568] initcall blk_settings_init+0x0/0x22 returned 0 after 0 usecs
[ 0.446568] calling blk_ioc_init+0x0/0x29 @ 1
[ 0.446568] initcall blk_ioc_init+0x0/0x29 returned 0 after 0 usecs
[ 0.447389] calling blk_softirq_init+0x0/0x63 @ 1
[ 0.447393] initcall blk_softirq_init+0x0/0x63 returned 0 after 0 usecs
[ 0.447396] calling blk_mq_init+0x0/0x26 @ 1
[ 0.447399] initcall blk_mq_init+0x0/0x26 returned 0 after 0 usecs
[ 0.447403] calling genhd_device_init+0x0/0x66 @ 1
[ 0.447467] initcall genhd_device_init+0x0/0x66 returned 0 after 0 usecs
[ 0.447467] calling irq_poll_setup+0x0/0x5e @ 1
[ 0.447467] initcall irq_poll_setup+0x0/0x5e returned 0 after 0 usecs
[ 0.447467] calling byt_gpio_init+0x0/0x16 @ 1
[ 0.447467] initcall byt_gpio_init+0x0/0x16 returned 0 after 0 usecs
[ 0.447467] calling gpiolib_debugfs_init+0x0/0x24 @ 1
[ 0.447467] initcall gpiolib_debugfs_init+0x0/0x24 returned 0 after 0 usecs
[ 0.447467] calling pwm_debugfs_init+0x0/0x24 @ 1
[ 0.447467] initcall pwm_debugfs_init+0x0/0x24 returned 0 after 0 usecs
[ 0.447469] calling pwm_sysfs_init+0x0/0x19 @ 1
[ 0.447478] initcall pwm_sysfs_init+0x0/0x19 returned 0 after 0 usecs
[ 0.447484] calling pci_slot_init+0x0/0x40 @ 1
[ 0.447491] initcall pci_slot_init+0x0/0x40 returned 0 after 0 usecs
[ 0.447495] calling fbmem_init+0x0/0xcc @ 1
[ 0.447553] initcall fbmem_init+0x0/0xcc returned 0 after 0 usecs
[ 0.447557] calling scan_for_dmi_ipmi+0x0/0x10f @ 1
[ 0.447561] initcall scan_for_dmi_ipmi+0x0/0x10f returned 0 after 0 usecs
[ 0.447566] calling acpi_init+0x0/0x2e2 @ 1
[ 0.447599] ACPI: Added _OSI(Module Device)
[ 0.447601] ACPI: Added _OSI(Processor Device)
[ 0.447603] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.447605] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.447608] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.447610] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.459631] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.463614] ACPI: Interpreter enabled
[ 0.463660] ACPI: (supports S0 S1 S3 S5)
[ 0.463663] ACPI: Using IOAPIC for interrupt routing
[ 0.463700] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.464103] ACPI: Enabled 19 GPEs in block 00 to 1F
[ 0.473824] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.473838] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.473998] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability LTR]
[ 0.474451] PCI host bridge to bus 0000:00
[ 0.474457] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.474460] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.474463] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.474467] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
[ 0.474471] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.474490] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
[ 0.474503] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x10 @ 1
[ 0.474508] pci 0000:00:00.0: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[ 0.474782] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000
[ 0.474806] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
[ 0.474816] pci 0000:00:01.0: reg 0x14: [io 0x2000-0x20ff]
[ 0.474826] pci 0000:00:01.0: reg 0x18: [mem 0xf0100000-0xf013ffff]
[ 0.474858] pci 0000:00:01.0: enabling Extended Tags
[ 0.474878] pci 0000:00:01.0: calling quirk_no_pm_reset+0x0/0x20 @ 1
[ 0.474883] pci 0000:00:01.0: quirk_no_pm_reset+0x0/0x20 took 0 usecs
[ 0.474917] pci 0000:00:01.0: supports D1 D2
[ 0.475154] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300
[ 0.475176] pci 0000:00:01.1: reg 0x10: [mem 0xf0140000-0xf0143fff]
[ 0.475218] pci 0000:00:01.1: enabling Extended Tags
[ 0.475265] pci 0000:00:01.1: supports D1 D2
[ 0.475607] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.475637] pci 0000:00:11.0: reg 0x10: [io 0x2410-0x2417]
[ 0.475651] pci 0000:00:11.0: reg 0x14: [io 0x2420-0x2423]
[ 0.475664] pci 0000:00:11.0: reg 0x18: [io 0x2418-0x241f]
[ 0.475678] pci 0000:00:11.0: reg 0x1c: [io 0x2424-0x2427]
[ 0.475691] pci 0000:00:11.0: reg 0x20: [io 0x2400-0x240f]
[ 0.475705] pci 0000:00:11.0: reg 0x24: [mem 0xf014b000-0xf014b3ff]
[ 0.476043] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.476068] pci 0000:00:12.0: reg 0x10: [mem 0xf0148000-0xf0148fff]
[ 0.476366] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.476406] pci 0000:00:12.2: reg 0x10: [mem 0xf014c000-0xf014c0ff]
[ 0.476518] pci 0000:00:12.2: supports D1 D2
[ 0.476522] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.476827] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.476853] pci 0000:00:13.0: reg 0x10: [mem 0xf0149000-0xf0149fff]
[ 0.477187] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.477218] pci 0000:00:13.2: reg 0x10: [mem 0xf014d000-0xf014d0ff]
[ 0.477329] pci 0000:00:13.2: supports D1 D2
[ 0.477332] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.477644] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.477654] pci 0000:00:14.0: calling sb600_disable_hpet_bar+0x0/0x80 @ 1
[ 0.477661] pci 0000:00:14.0: sb600_disable_hpet_bar+0x0/0x80 took 0 usecs
[ 0.477753] pci 0000:00:14.0: calling force_disable_hpet_msi+0x0/0x20 @ 1
[ 0.477758] pci 0000:00:14.0: force_disable_hpet_msi+0x0/0x20 took 0 usecs
[ 0.477763] pci 0000:00:14.0: calling sb600_hpet_quirk+0x0/0x80 @ 1
[ 0.477768] pci 0000:00:14.0: sb600_hpet_quirk+0x0/0x80 took 0 usecs
[ 0.478053] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.478088] pci 0000:00:14.2: reg 0x10: [mem 0xf0144000-0xf0147fff 64bit]
[ 0.478183] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.478486] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.478857] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.479178] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.479204] pci 0000:00:14.5: reg 0x10: [mem 0xf014a000-0xf014afff]
[ 0.479590] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[ 0.479645] pci 0000:00:15.0: enabling Extended Tags
[ 0.479718] pci 0000:00:15.0: supports D1 D2
[ 0.480032] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
[ 0.480092] pci 0000:00:15.1: enabling Extended Tags
[ 0.480164] pci 0000:00:15.1: supports D1 D2
[ 0.480491] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
[ 0.480502] pci 0000:00:18.0: calling quirk_mmio_always_on+0x0/0x10 @ 1
[ 0.480506] pci 0000:00:18.0: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[ 0.480746] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
[ 0.480756] pci 0000:00:18.1: calling quirk_mmio_always_on+0x0/0x10 @ 1
[ 0.480760] pci 0000:00:18.1: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[ 0.480989] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
[ 0.480998] pci 0000:00:18.2: calling quirk_mmio_always_on+0x0/0x10 @ 1
[ 0.481003] pci 0000:00:18.2: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[ 0.481240] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
[ 0.481249] pci 0000:00:18.3: calling quirk_mmio_always_on+0x0/0x10 @ 1
[ 0.481254] pci 0000:00:18.3: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[ 0.481523] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
[ 0.481532] pci 0000:00:18.4: calling quirk_mmio_always_on+0x0/0x10 @ 1
[ 0.481536] pci 0000:00:18.4: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[ 0.481765] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
[ 0.481773] pci 0000:00:18.5: calling quirk_mmio_always_on+0x0/0x10 @ 1
[ 0.481778] pci 0000:00:18.5: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[ 0.482007] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
[ 0.482016] pci 0000:00:18.6: calling quirk_mmio_always_on+0x0/0x10 @ 1
[ 0.482021] pci 0000:00:18.6: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[ 0.482253] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
[ 0.482262] pci 0000:00:18.7: calling quirk_mmio_always_on+0x0/0x10 @ 1
[ 0.482266] pci 0000:00:18.7: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[ 0.482600] pci_bus 0000:01: extended config space not accessible
[ 0.482776] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
[ 0.482790] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.482793] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.482796] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.482800] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
[ 0.482880] pci 0000:00:15.0: PCI bridge to [bus 02]
[ 0.482998] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.483041] pci 0000:03:00.0: reg 0x10: [io 0x1000-0x10ff]
[ 0.483080] pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
[ 0.483106] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.483250] pci 0000:03:00.0: supports D1 D2
[ 0.483253] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.483314] pci 0000:03:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:15.1 (capable of 7.876 Gb/s with 8 GT/s x1 link)
[ 0.486442] pci 0000:00:15.1: PCI bridge to [bus 03]
[ 0.486457] pci 0000:00:15.1: bridge window [io 0x1000-0x1fff]
[ 0.486474] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.486518] pci_bus 0000:00: on NUMA node 0
[ 0.488003] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.488307] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.488611] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.488940] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.489238] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.489606] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0, disabled.
[ 0.489929] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.490256] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.490773] initcall acpi_init+0x0/0x2e2 returned 0 after 41992 usecs
[ 0.490779] calling pnp_init+0x0/0x14 @ 1
[ 0.490799] initcall pnp_init+0x0/0x14 returned 0 after 0 usecs
[ 0.490803] calling misc_init+0x0/0xae @ 1
[ 0.490820] initcall misc_init+0x0/0xae returned 0 after 0 usecs
[ 0.490825] calling vga_arb_device_init+0x0/0x231 @ 1
[ 0.490869] pci 0000:00:01.0: vgaarb: setting as boot VGA device
[ 0.490869] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.490869] pci 0000:00:01.0: vgaarb: bridge control possible
[ 0.490869] vgaarb: loaded
[ 0.490869] initcall vga_arb_device_init+0x0/0x231 returned 0 after 0 usecs
[ 0.490869] calling cn_init+0x0/0xd0 @ 1
[ 0.490869] initcall cn_init+0x0/0xd0 returned 0 after 0 usecs
[ 0.490869] calling dax_fs_init+0x0/0xab @ 1
[ 0.490869] initcall dax_fs_init+0x0/0xab returned 0 after 0 usecs
[ 0.490869] calling dma_buf_init+0x0/0x99 @ 1
[ 0.490869] initcall dma_buf_init+0x0/0x99 returned 0 after 0 usecs
[ 0.490869] calling init_scsi+0x0/0x90 @ 1
[ 0.490869] SCSI subsystem initialized
[ 0.490869] initcall init_scsi+0x0/0x90 returned 0 after 0 usecs
[ 0.490869] calling ata_init+0x0/0x2a7 @ 1
[ 0.491410] libata version 3.00 loaded.
[ 0.491414] initcall ata_init+0x0/0x2a7 returned 0 after 976 usecs
[ 0.491418] calling phy_init+0x0/0x4c @ 1
[ 0.491468] initcall phy_init+0x0/0x4c returned 0 after 0 usecs
[ 0.491472] calling usb_init+0x0/0x11b @ 1
[ 0.491483] ACPI: bus type USB registered
[ 0.491522] usbcore: registered new interface driver usbfs
[ 0.491545] usbcore: registered new interface driver hub
[ 0.491577] usbcore: registered new device driver usb
[ 0.491581] initcall usb_init+0x0/0x11b returned 0 after 0 usecs
[ 0.491586] calling serio_init+0x0/0x2d @ 1
[ 0.491602] initcall serio_init+0x0/0x2d returned 0 after 0 usecs
[ 0.491606] calling input_init+0x0/0xe3 @ 1
[ 0.491619] initcall input_init+0x0/0xe3 returned 0 after 0 usecs
[ 0.491624] calling rtc_init+0x0/0x47 @ 1
[ 0.491634] initcall rtc_init+0x0/0x47 returned 0 after 0 usecs
[ 0.491639] calling power_supply_class_init+0x0/0x3a @ 1
[ 0.491649] initcall power_supply_class_init+0x0/0x3a returned 0 after 0 usecs
[ 0.491654] calling hwmon_init+0x0/0xd5 @ 1
[ 0.491667] initcall hwmon_init+0x0/0xd5 returned 0 after 0 usecs
[ 0.491672] calling leds_init+0x0/0x37 @ 1
[ 0.491681] initcall leds_init+0x0/0x37 returned 0 after 0 usecs
[ 0.491686] calling dmi_init+0x0/0xf8 @ 1
[ 0.491716] initcall dmi_init+0x0/0xf8 returned 0 after 0 usecs
[ 0.491719] calling devfreq_init+0x0/0x90 @ 1
[ 0.491771] initcall devfreq_init+0x0/0x90 returned 0 after 0 usecs
[ 0.491771] calling ras_init+0x0/0x14 @ 1
[ 0.491771] initcall ras_init+0x0/0x14 returned 0 after 0 usecs
[ 0.491771] calling nvmem_init+0x0/0x14 @ 1
[ 0.491771] initcall nvmem_init+0x0/0x14 returned 0 after 0 usecs
[ 0.491771] calling pci_subsys_init+0x0/0x65 @ 1
[ 0.491771] PCI: Using ACPI for IRQ routing
[ 0.491771] PCI: pci_cache_line_size set to 64 bytes
[ 0.491771] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.491771] e820: reserve RAM buffer [mem 0xc7d3e000-0xc7ffffff]
[ 0.491771] e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff]
[ 0.491771] initcall pci_subsys_init+0x0/0x65 returned 0 after 0 usecs
[ 0.491771] calling proto_init+0x0/0x14 @ 1
[ 0.491771] initcall proto_init+0x0/0x14 returned 0 after 0 usecs
[ 0.491771] calling net_dev_init+0x0/0x1e9 @ 1
[ 0.491875] initcall net_dev_init+0x0/0x1e9 returned 0 after 0 usecs
[ 0.491879] calling neigh_init+0x0/0x78 @ 1
[ 0.491884] initcall neigh_init+0x0/0x78 returned 0 after 0 usecs
[ 0.491888] calling fib_notifier_init+0x0/0x14 @ 1
[ 0.491893] initcall fib_notifier_init+0x0/0x14 returned 0 after 0 usecs
[ 0.491896] calling fib_rules_init+0x0/0xa6 @ 1
[ 0.491903] initcall fib_rules_init+0x0/0xa6 returned 0 after 0 usecs
[ 0.491907] calling init_cgroup_netprio+0x0/0x16 @ 1
[ 0.491911] initcall init_cgroup_netprio+0x0/0x16 returned 0 after 0 usecs
[ 0.491915] calling bpf_lwt_init+0x0/0x19 @ 1
[ 0.491918] initcall bpf_lwt_init+0x0/0x19 returned 0 after 0 usecs
[ 0.491922] calling pktsched_init+0x0/0xf6 @ 1
[ 0.491931] initcall pktsched_init+0x0/0xf6 returned 0 after 0 usecs
[ 0.491935] calling tc_filter_init+0x0/0xe3 @ 1
[ 0.492402] initcall tc_filter_init+0x0/0xe3 returned 0 after 0 usecs
[ 0.492406] calling tc_action_init+0x0/0x65 @ 1
[ 0.492415] initcall tc_action_init+0x0/0x65 returned 0 after 0 usecs
[ 0.492418] calling genl_init+0x0/0x33 @ 1
[ 0.492436] initcall genl_init+0x0/0x33 returned 0 after 0 usecs
[ 0.492671] calling nmi_warning_debugfs+0x0/0x26 @ 1
[ 0.492680] initcall nmi_warning_debugfs+0x0/0x26 returned 0 after 0 usecs
[ 0.492686] calling hpet_late_init+0x0/0xf6 @ 1
[ 0.492764] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.492771] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.494377] initcall hpet_late_init+0x0/0xf6 returned 0 after 1953 usecs
[ 0.494381] calling init_amd_nbs+0x0/0x103 @ 1
[ 0.494422] initcall init_amd_nbs+0x0/0x103 returned 0 after 0 usecs
[ 0.494426] calling sugov_register+0x0/0x14 @ 1
[ 0.494430] initcall sugov_register+0x0/0x14 returned 0 after 0 usecs
[ 0.494435] calling clocksource_done_booting+0x0/0x40 @ 1
[ 0.494462] clocksource: Switched to clocksource tsc-early
[ 0.494466] initcall clocksource_done_booting+0x0/0x40 returned 0 after 10 usecs
[ 0.494471] initcall tracer_init_tracefs blacklisted
[ 0.494477] calling init_trace_printk_function_export+0x0/0x2d @ 1
[ 0.494513] initcall init_trace_printk_function_export+0x0/0x2d returned 0 after 30 usecs
[ 0.494517] calling init_graph_tracefs+0x0/0x2d @ 1
[ 0.494523] initcall init_graph_tracefs+0x0/0x2d returned 0 after 3 usecs
[ 0.494527] calling init_kprobe_trace+0x0/0x83 @ 1
[ 0.494545] initcall init_kprobe_trace+0x0/0x83 returned 0 after 14 usecs
[ 0.494549] calling init_uprobe_trace+0x0/0x4c @ 1
[ 0.494557] initcall init_uprobe_trace+0x0/0x4c returned 0 after 4 usecs
[ 0.494560] calling bpf_init+0x0/0x42 @ 1
[ 0.494569] initcall bpf_init+0x0/0x42 returned 0 after 5 usecs
[ 0.494573] calling init_pipe_fs+0x0/0x42 @ 1
[ 0.494587] initcall init_pipe_fs+0x0/0x42 returned 0 after 10 usecs
[ 0.494591] calling cgroup_writeback_init+0x0/0x2c @ 1
[ 0.494614] initcall cgroup_writeback_init+0x0/0x2c returned 0 after 18 usecs
[ 0.494618] calling inotify_user_setup+0x0/0x4a @ 1
[ 0.494643] initcall inotify_user_setup+0x0/0x4a returned 0 after 20 usecs
[ 0.494646] calling eventpoll_init+0x0/0xab @ 1
[ 0.494664] initcall eventpoll_init+0x0/0xab returned 0 after 14 usecs
[ 0.494668] calling anon_inode_init+0x0/0x4e @ 1
[ 0.494686] initcall anon_inode_init+0x0/0x4e returned 0 after 13 usecs
[ 0.494690] calling init_dax_wait_table+0x0/0x2f @ 1
[ 0.494724] initcall init_dax_wait_table+0x0/0x2f returned 0 after 29 usecs
[ 0.494727] calling proc_locks_init+0x0/0x23 @ 1
[ 0.494734] initcall proc_locks_init+0x0/0x23 returned 0 after 3 usecs
[ 0.494737] calling dquot_init+0x0/0xfa @ 1
[ 0.494739] VFS: Disk quotas dquot_6.6.0
[ 0.494778] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.494783] initcall dquot_init+0x0/0xfa returned 0 after 41 usecs
[ 0.494786] calling quota_init+0x0/0x25 @ 1
[ 0.494805] initcall quota_init+0x0/0x25 returned 0 after 14 usecs
[ 0.494809] calling proc_cmdline_init+0x0/0x21 @ 1
[ 0.494814] initcall proc_cmdline_init+0x0/0x21 returned 0 after 2 usecs
[ 0.494818] calling proc_consoles_init+0x0/0x23 @ 1
[ 0.494823] initcall proc_consoles_init+0x0/0x23 returned 0 after 1 usecs
[ 0.494827] calling proc_cpuinfo_init+0x0/0x1f @ 1
[ 0.494832] initcall proc_cpuinfo_init+0x0/0x1f returned 0 after 1 usecs
[ 0.494835] calling proc_devices_init+0x0/0x23 @ 1
[ 0.494840] initcall proc_devices_init+0x0/0x23 returned 0 after 1 usecs
[ 0.494844] calling proc_interrupts_init+0x0/0x23 @ 1
[ 0.494848] initcall proc_interrupts_init+0x0/0x23 returned 0 after 1 usecs
[ 0.494852] calling proc_loadavg_init+0x0/0x21 @ 1
[ 0.494856] initcall proc_loadavg_init+0x0/0x21 returned 0 after 1 usecs
[ 0.494860] calling proc_meminfo_init+0x0/0x21 @ 1
[ 0.494864] initcall proc_meminfo_init+0x0/0x21 returned 0 after 1 usecs
[ 0.494868] calling proc_stat_init+0x0/0x1f @ 1
[ 0.494873] initcall proc_stat_init+0x0/0x1f returned 0 after 1 usecs
[ 0.494877] calling proc_uptime_init+0x0/0x21 @ 1
[ 0.494882] initcall proc_uptime_init+0x0/0x21 returned 0 after 1 usecs
[ 0.494886] calling proc_version_init+0x0/0x21 @ 1
[ 0.494890] initcall proc_version_init+0x0/0x21 returned 0 after 1 usecs
[ 0.494894] calling proc_softirqs_init+0x0/0x21 @ 1
[ 0.494899] initcall proc_softirqs_init+0x0/0x21 returned 0 after 1 usecs
[ 0.494902] calling proc_kcore_init+0x0/0x6e @ 1
[ 0.494909] initcall proc_kcore_init+0x0/0x6e returned 0 after 3 usecs
[ 0.494913] calling vmcore_init+0x0/0x679 @ 1
[ 0.494917] initcall vmcore_init+0x0/0x679 returned 0 after 0 usecs
[ 0.494920] calling proc_kmsg_init+0x0/0x22 @ 1
[ 0.494925] initcall proc_kmsg_init+0x0/0x22 returned 0 after 1 usecs
[ 0.494929] calling proc_page_init+0x0/0x4e @ 1
[ 0.494935] initcall proc_page_init+0x0/0x4e returned 0 after 3 usecs
[ 0.494937] calling init_ramfs_fs+0x0/0x23 @ 1
[ 0.494937] initcall init_ramfs_fs+0x0/0x23 returned 0 after 0 usecs
[ 0.494937] calling init_hugetlbfs_fs+0x0/0x142 @ 1
[ 0.494937] initcall init_hugetlbfs_fs+0x0/0x142 returned 0 after 43 usecs
[ 0.494937] calling blk_scsi_ioctl_init+0x0/0x352 @ 1
[ 0.494937] initcall blk_scsi_ioctl_init+0x0/0x352 returned 0 after 1 usecs
[ 0.494940] calling dynamic_debug_init_debugfs+0x0/0x5f @ 1
[ 0.494950] initcall dynamic_debug_init_debugfs+0x0/0x5f returned 0 after 6 usecs
[ 0.494956] calling acpi_event_init+0x0/0x31 @ 1
[ 0.494968] initcall acpi_event_init+0x0/0x31 returned 0 after 7 usecs
[ 0.494971] calling pnp_system_init+0x0/0x14 @ 1
[ 0.494994] initcall pnp_system_init+0x0/0x14 returned 0 after 20 usecs
[ 0.494997] calling pnpacpi_init+0x0/0x67 @ 1
[ 0.494999] pnp: PnP ACPI init
[ 0.495789] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.495910] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.495997] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.496670] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.496753] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.496784] pnp: PnP ACPI: found 5 devices
[ 0.496789] initcall pnpacpi_init+0x0/0x67 returned 0 after 1745 usecs
[ 0.496793] calling chr_dev_init+0x0/0x9b @ 1
[ 0.501829] initcall chr_dev_init+0x0/0x9b returned 0 after 4906 usecs
[ 0.501839] calling firmware_class_init+0x0/0xe0 @ 1
[ 0.501846] initcall firmware_class_init+0x0/0xe0 returned 0 after 3 usecs
[ 0.501851] calling thermal_init+0x0/0xce @ 1
[ 0.501925] initcall thermal_init+0x0/0xce returned 0 after 67 usecs
[ 0.501931] calling cpufreq_gov_performance_init+0x0/0x14 @ 1
[ 0.501936] initcall cpufreq_gov_performance_init+0x0/0x14 returned 0 after 1 usecs
[ 0.501940] calling cpufreq_gov_dbs_init+0x0/0x14 @ 1
[ 0.501944] initcall cpufreq_gov_dbs_init+0x0/0x14 returned 0 after 0 usecs
[ 0.501948] calling pcibios_assign_resources+0x0/0x96 @ 1
[ 0.502067] pci 0000:00:14.4: PCI bridge to [bus 01]
[ 0.502086] pci 0000:00:15.0: PCI bridge to [bus 02]
[ 0.502102] pci 0000:00:15.1: PCI bridge to [bus 03]
[ 0.502107] pci 0000:00:15.1: bridge window [io 0x1000-0x1fff]
[ 0.502117] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.502130] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.502133] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.502136] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.502139] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff]
[ 0.502143] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window]
[ 0.502146] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window]
[ 0.502149] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.502152] pci_bus 0000:01: resource 7 [mem 0xe0000000-0xffffffff]
[ 0.502155] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.502158] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.502248] initcall pcibios_assign_resources+0x0/0x96 returned 0 after 289 usecs
[ 0.502253] calling sysctl_core_init+0x0/0x28 @ 1
[ 0.502281] initcall sysctl_core_init+0x0/0x28 returned 0 after 24 usecs
[ 0.502286] calling eth_offload_init+0x0/0x16 @ 1
[ 0.502289] initcall eth_offload_init+0x0/0x16 returned 0 after 0 usecs
[ 0.502294] calling ipv4_offload_init+0x0/0x6e @ 1
[ 0.502299] initcall ipv4_offload_init+0x0/0x6e returned 0 after 1 usecs
[ 0.502303] calling inet_init+0x0/0x240 @ 1
[ 0.502358] NET: Registered protocol family 2
[ 0.502684] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[ 0.502693] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.502722] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.502759] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.502819] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.502832] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.502951] initcall inet_init+0x0/0x240 returned 0 after 626 usecs
[ 0.502956] calling af_unix_init+0x0/0x4c @ 1
[ 0.502968] NET: Registered protocol family 1
[ 0.502980] initcall af_unix_init+0x0/0x4c returned 0 after 19 usecs
[ 0.502985] calling ipv6_offload_init+0x0/0x77 @ 1
[ 0.502991] initcall ipv6_offload_init+0x0/0x77 returned 0 after 1 usecs
[ 0.502996] calling pci_apply_final_quirks+0x0/0x118 @ 1
[ 0.503015] pci 0000:00:01.0: calling pci_fixup_video+0x0/0x110 @ 1
[ 0.503024] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.503028] pci 0000:00:01.0: pci_fixup_video+0x0/0x110 took 8 usecs
[ 0.503037] pci 0000:00:01.1: calling quirk_gpu_hda+0x0/0xb0 @ 1
[ 0.503045] pci 0000:00:01.1: Linked as a consumer to 0000:00:01.0
[ 0.503057] pci 0000:00:01.1: quirk_gpu_hda+0x0/0xb0 took 15 usecs
[ 0.503065] pci 0000:00:11.0: calling quirk_msi_intx_disable_ati_bug+0x0/0x50 @ 1
[ 0.503071] pci 0000:00:11.0: quirk_msi_intx_disable_ati_bug+0x0/0x50 took 2 usecs
[ 0.503151] pci 0000:00:12.0: calling quirk_usb_early_handoff+0x0/0x6f7 @ 1
[ 0.555283] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6f7 took 50889 usecs
[ 0.555369] pci 0000:00:12.2: calling quirk_usb_early_handoff+0x0/0x6f7 @ 1
[ 0.555912] pci 0000:00:12.2: quirk_usb_early_handoff+0x0/0x6f7 took 522 usecs
[ 0.555991] pci 0000:00:13.0: calling quirk_usb_early_handoff+0x0/0x6f7 @ 1
[ 0.556468] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x6f7 took 459 usecs
[ 0.556547] pci 0000:00:13.2: calling quirk_usb_early_handoff+0x0/0x6f7 @ 1
[ 0.557039] pci 0000:00:13.2: quirk_usb_early_handoff+0x0/0x6f7 took 473 usecs
[ 0.557123] pci 0000:00:14.2: calling quirk_gpu_hda+0x0/0xb0 @ 1
[ 0.557127] pci 0000:00:14.2: quirk_gpu_hda+0x0/0xb0 took 0 usecs
[ 0.557145] pci 0000:00:14.5: calling quirk_usb_early_handoff+0x0/0x6f7 @ 1
[ 0.557616] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x6f7 took 453 usecs
[ 0.557735] PCI: CLS 64 bytes, default 64
[ 0.557741] initcall pci_apply_final_quirks+0x0/0x118 returned 0 after 53457 usecs
[ 0.557748] calling acpi_reserve_resources+0x0/0xcd @ 1
[ 0.557757] initcall acpi_reserve_resources+0x0/0xcd returned 0 after 5 usecs
[ 0.557761] calling populate_rootfs+0x0/0xf9 @ 1
[ 0.557877] initcall populate_rootfs+0x0/0xf9 returned 0 after 108 usecs
[ 0.557882] calling pci_iommu_init+0x0/0x3a @ 1
[ 0.557886] initcall pci_iommu_init+0x0/0x3a returned 0 after 1 usecs
[ 0.558120] calling amd_uncore_init+0x0/0x247 @ 1
[ 0.558124] initcall amd_uncore_init+0x0/0x247 returned -19 after 0 usecs
[ 0.558127] calling amd_ibs_init+0x0/0x196 @ 1
[ 0.558131] LVT offset 0 assigned for vector 0x400
[ 0.558239] perf: AMD IBS detected (0x000000ff)
[ 0.558251] initcall amd_ibs_init+0x0/0x196 returned 0 after 112 usecs
[ 0.558257] calling msr_init+0x0/0xb9 @ 1
[ 0.558264] initcall msr_init+0x0/0xb9 returned 0 after 3 usecs
[ 0.558269] calling register_kernel_offset_dumper+0x0/0x1b @ 1
[ 0.558273] initcall register_kernel_offset_dumper+0x0/0x1b returned 0 after 1 usecs
[ 0.558277] calling i8259A_init_ops+0x0/0x25 @ 1
[ 0.558281] initcall i8259A_init_ops+0x0/0x25 returned 0 after 0 usecs
[ 0.558285] calling init_tsc_clocksource+0x0/0xa4 @ 1
[ 0.558305] initcall init_tsc_clocksource+0x0/0xa4 returned 0 after 15 usecs
[ 0.558309] calling add_rtc_cmos+0x0/0xa6 @ 1
[ 0.558313] initcall add_rtc_cmos+0x0/0xa6 returned 0 after 0 usecs
[ 0.558318] calling i8237A_init_ops+0x0/0x3c @ 1
[ 0.558407] initcall i8237A_init_ops+0x0/0x3c returned 0 after 83 usecs
[ 0.558411] calling msr_init+0x0/0xc9 @ 1
[ 0.558777] initcall msr_init+0x0/0xc9 returned 0 after 352 usecs
[ 0.558781] calling cpuid_init+0x0/0xc9 @ 1
[ 0.558979] initcall cpuid_init+0x0/0xc9 returned 0 after 188 usecs
[ 0.558984] calling ioapic_init_ops+0x0/0x16 @ 1
[ 0.558988] initcall ioapic_init_ops+0x0/0x16 returned 0 after 0 usecs
[ 0.558992] calling add_pcspkr+0x0/0x61 @ 1
[ 0.559037] initcall add_pcspkr+0x0/0x61 returned 0 after 39 usecs
[ 0.559043] calling start_periodic_check_for_corruption+0x0/0x40 @ 1
[ 0.559045] Scanning for low memory corruption every 5 seconds
[ 0.559052] initcall start_periodic_check_for_corruption+0x0/0x40 returned 0 after 5 usecs
[ 0.559056] calling sysfb_init+0x0/0x83 @ 1
[ 0.559425] initcall sysfb_init+0x0/0x83 returned 0 after 350 usecs
[ 0.559433] calling pt_dump_init+0x0/0x57 @ 1
[ 0.559438] initcall pt_dump_init+0x0/0x57 returned 0 after 0 usecs
[ 0.559443] calling proc_execdomains_init+0x0/0x21 @ 1
[ 0.559453] initcall proc_execdomains_init+0x0/0x21 returned 0 after 6 usecs
[ 0.559458] calling register_warn_debugfs+0x0/0x24 @ 1
[ 0.559478] initcall register_warn_debugfs+0x0/0x24 returned 0 after 15 usecs
[ 0.559483] calling cpuhp_sysfs_init+0x0/0x79 @ 1
[ 0.559506] initcall cpuhp_sysfs_init+0x0/0x79 returned 0 after 18 usecs
[ 0.559509] calling ioresources_init+0x0/0x40 @ 1
[ 0.559516] initcall ioresources_init+0x0/0x40 returned 0 after 3 usecs
[ 0.559520] calling init_sched_debug_procfs+0x0/0x2f @ 1
[ 0.559525] initcall init_sched_debug_procfs+0x0/0x2f returned 0 after 1 usecs
[ 0.559529] calling irq_pm_init_ops+0x0/0x16 @ 1
[ 0.559532] initcall irq_pm_init_ops+0x0/0x16 returned 0 after 0 usecs
[ 0.559537] calling timekeeping_init_ops+0x0/0x16 @ 1
[ 0.559541] initcall timekeeping_init_ops+0x0/0x16 returned 0 after 0 usecs
[ 0.559545] calling init_clocksource_sysfs+0x0/0x24 @ 1
[ 0.559620] initcall init_clocksource_sysfs+0x0/0x24 returned 0 after 69 usecs
[ 0.559625] calling init_timer_list_procfs+0x0/0x2f @ 1
[ 0.559631] initcall init_timer_list_procfs+0x0/0x2f returned 0 after 2 usecs
[ 0.559635] calling alarmtimer_init+0x0/0x114 @ 1
[ 0.559704] probe of alarmtimer returned 1 after 21 usecs
[ 0.559711] initcall alarmtimer_init+0x0/0x114 returned 0 after 70 usecs
[ 0.559715] calling init_posix_timers+0x0/0x29 @ 1
[ 0.559747] initcall init_posix_timers+0x0/0x29 returned 0 after 27 usecs
[ 0.559752] calling clockevents_init_sysfs+0x0/0x9e @ 1
[ 0.559901] initcall clockevents_init_sysfs+0x0/0x9e returned 0 after 140 usecs
[ 0.559906] calling proc_dma_init+0x0/0x21 @ 1
[ 0.559911] initcall proc_dma_init+0x0/0x21 returned 0 after 2 usecs
[ 0.559916] calling proc_modules_init+0x0/0x1f @ 1
[ 0.559921] initcall proc_modules_init+0x0/0x1f returned 0 after 1 usecs
[ 0.559925] calling kallsyms_init+0x0/0x22 @ 1
[ 0.559930] initcall kallsyms_init+0x0/0x22 returned 0 after 1 usecs
[ 0.559935] calling pid_namespaces_init+0x0/0x2c @ 1
[ 0.559942] initcall pid_namespaces_init+0x0/0x2c returned 0 after 3 usecs
[ 0.559947] calling audit_watch_init+0x0/0x38 @ 1
[ 0.559951] initcall audit_watch_init+0x0/0x38 returned 0 after 1 usecs
[ 0.559956] calling audit_fsnotify_init+0x0/0x38 @ 1
[ 0.559960] initcall audit_fsnotify_init+0x0/0x38 returned 0 after 0 usecs
[ 0.559964] calling audit_tree_init+0x0/0x40 @ 1
[ 0.559969] initcall audit_tree_init+0x0/0x40 returned 0 after 1 usecs
[ 0.559973] calling init_kprobes+0x0/0x172 @ 1
[ 0.560115] initcall init_kprobes+0x0/0x172 returned 0 after 134 usecs
[ 0.560120] calling seccomp_sysctl_init+0x0/0x31 @ 1
[ 0.560135] initcall seccomp_sysctl_init+0x0/0x31 returned 0 after 11 usecs
[ 0.560140] calling utsname_sysctl_init+0x0/0x16 @ 1
[ 0.560152] initcall utsname_sysctl_init+0x0/0x16 returned 0 after 8 usecs
[ 0.560157] calling init_tracepoints+0x0/0x2b @ 1
[ 0.560161] initcall init_tracepoints+0x0/0x2b returned 0 after 0 usecs
[ 0.560164] calling stack_trace_init+0x0/0x9e @ 1
[ 0.560179] initcall stack_trace_init+0x0/0x9e returned 0 after 11 usecs
[ 0.560182] calling init_mmio_trace+0x0/0xf @ 1
[ 0.560189] initcall init_mmio_trace+0x0/0xf returned 0 after 3 usecs
[ 0.560192] calling init_blk_tracer+0x0/0x4d @ 1
[ 0.560208] initcall init_blk_tracer+0x0/0x4d returned 0 after 12 usecs
[ 0.560212] calling perf_event_sysfs_init+0x0/0x78 @ 1
[ 0.560471] initcall perf_event_sysfs_init+0x0/0x78 returned 0 after 249 usecs
[ 0.560475] calling init_uprobes+0x0/0x56 @ 1
[ 0.560482] initcall init_uprobes+0x0/0x56 returned 0 after 3 usecs
[ 0.560485] calling padata_driver_init+0x0/0x35 @ 1
[ 0.560490] initcall padata_driver_init+0x0/0x35 returned 0 after 2 usecs
[ 0.560495] calling system_trusted_keyring_init+0x0/0x55 @ 1
[ 0.560496] Initialise system trusted keyrings
[ 0.560511] initcall system_trusted_keyring_init+0x0/0x55 returned 0 after 12 usecs
[ 0.560515] calling kswapd_init+0x0/0x3b @ 1
[ 0.560697] initcall kswapd_init+0x0/0x3b returned 0 after 165 usecs
[ 0.560706] calling extfrag_debug_init+0x0/0x71 @ 1
[ 0.560723] initcall extfrag_debug_init+0x0/0x71 returned 0 after 12 usecs
[ 0.560728] calling mm_compute_batch_init+0x0/0x3e @ 1
[ 0.560732] initcall mm_compute_batch_init+0x0/0x3e returned 0 after 0 usecs
[ 0.560736] calling slab_proc_init+0x0/0x22 @ 1
[ 0.560746] initcall slab_proc_init+0x0/0x22 returned 0 after 6 usecs
[ 0.560750] calling workingset_init+0x0/0x88 @ 1
[ 0.560753] workingset: timestamp_bits=14 max_order=20 bucket_order=6
[ 0.560763] initcall workingset_init+0x0/0x88 returned 0 after 8 usecs
[ 0.560767] calling proc_vmalloc_init+0x0/0x26 @ 1
[ 0.560773] initcall proc_vmalloc_init+0x0/0x26 returned 0 after 2 usecs
[ 0.560778] calling procswaps_init+0x0/0x1f @ 1
[ 0.560783] initcall procswaps_init+0x0/0x1f returned 0 after 2 usecs
[ 0.560788] calling init_frontswap+0x0/0x82 @ 1
[ 0.560804] initcall init_frontswap+0x0/0x82 returned 0 after 11 usecs
[ 0.560809] calling slab_sysfs_init+0x0/0xd0 @ 1
[ 0.563947] initcall slab_sysfs_init+0x0/0xd0 returned 0 after 3057 usecs
[ 0.563952] calling init_cleancache+0x0/0x82 @ 1
[ 0.563979] initcall init_cleancache+0x0/0x82 returned 0 after 22 usecs
[ 0.563982] calling init_zbud+0x0/0x20 @ 1
[ 0.563983] zbud: loaded
[ 0.563986] initcall init_zbud+0x0/0x20 returned 0 after 1 usecs
[ 0.563989] calling zs_init+0x0/0x6d @ 1
[ 0.564020] initcall zs_init+0x0/0x6d returned 0 after 27 usecs
[ 0.564023] calling init_z3fold+0x0/0x16 @ 1
[ 0.564026] initcall init_z3fold+0x0/0x16 returned 0 after 0 usecs
[ 0.564030] calling fcntl_init+0x0/0x29 @ 1
[ 0.564043] initcall fcntl_init+0x0/0x29 returned 0 after 9 usecs
[ 0.564047] calling proc_filesystems_init+0x0/0x21 @ 1
[ 0.564053] initcall proc_filesystems_init+0x0/0x21 returned 0 after 3 usecs
[ 0.564057] calling start_dirtytime_writeback+0x0/0x2c @ 1
[ 0.564063] initcall start_dirtytime_writeback+0x0/0x2c returned 0 after 3 usecs
[ 0.564066] calling blkdev_init+0x0/0x20 @ 1
[ 0.564084] initcall blkdev_init+0x0/0x20 returned 0 after 13 usecs
[ 0.564087] calling dio_init+0x0/0x2c @ 1
[ 0.564141] initcall dio_init+0x0/0x2c returned 0 after 48 usecs
[ 0.564144] calling dnotify_init+0x0/0x6f @ 1
[ 0.564158] initcall dnotify_init+0x0/0x6f returned 0 after 9 usecs
[ 0.564161] calling fanotify_user_setup+0x0/0x6c @ 1
[ 0.564224] initcall fanotify_user_setup+0x0/0x6c returned 0 after 56 usecs
[ 0.564227] calling userfaultfd_init+0x0/0x2c @ 1
[ 0.564270] initcall userfaultfd_init+0x0/0x2c returned 0 after 38 usecs
[ 0.564273] calling aio_setup+0x0/0x6e @ 1
[ 0.564300] initcall aio_setup+0x0/0x6e returned 0 after 21 usecs
[ 0.564304] calling mbcache_init+0x0/0x31 @ 1
[ 0.564356] initcall mbcache_init+0x0/0x31 returned 0 after 47 usecs
[ 0.564360] calling init_v2_quota_format+0x0/0x22 @ 1
[ 0.564364] initcall init_v2_quota_format+0x0/0x22 returned 0 after 0 usecs
[ 0.564368] calling init_devpts_fs+0x0/0x28 @ 1
[ 0.564389] initcall init_devpts_fs+0x0/0x28 returned 0 after 17 usecs
[ 0.564395] calling ext4_init_fs+0x0/0x166 @ 1
[ 0.564613] initcall ext4_init_fs+0x0/0x166 returned 0 after 208 usecs
[ 0.564618] calling journal_init+0x0/0xfc @ 1
[ 0.564739] initcall journal_init+0x0/0xfc returned 0 after 113 usecs
[ 0.564744] calling init_nls_cp437+0x0/0x16 @ 1
[ 0.564748] initcall init_nls_cp437+0x0/0x16 returned 0 after 0 usecs
[ 0.564753] calling init_nls_ascii+0x0/0x16 @ 1
[ 0.564757] initcall init_nls_ascii+0x0/0x16 returned 0 after 0 usecs
[ 0.564761] calling init_autofs_fs+0x0/0x29 @ 1
[ 0.564896] initcall init_autofs_fs+0x0/0x29 returned 0 after 125 usecs
[ 0.564902] calling init_pstore_fs+0x0/0x47 @ 1
[ 0.564904] pstore: using deflate compression
[ 0.564913] initcall init_pstore_fs+0x0/0x47 returned 0 after 6 usecs
[ 0.564918] calling ipc_init+0x0/0x27 @ 1
[ 0.564934] initcall ipc_init+0x0/0x27 returned 0 after 11 usecs
[ 0.564937] calling ipc_sysctl_init+0x0/0x16 @ 1
[ 0.564952] initcall ipc_sysctl_init+0x0/0x16 returned 0 after 11 usecs
[ 0.564955] calling init_mqueue_fs+0x0/0xee @ 1
[ 0.565041] initcall init_mqueue_fs+0x0/0xee returned 0 after 80 usecs
[ 0.565045] calling key_proc_init+0x0/0x5c @ 1
[ 0.565052] initcall key_proc_init+0x0/0x5c returned 0 after 3 usecs
[ 0.565055] calling selinux_nf_ip_init+0x0/0x49 @ 1
[ 0.565058] initcall selinux_nf_ip_init+0x0/0x49 returned 0 after 1 usecs
[ 0.565061] calling init_sel_fs+0x0/0xfa @ 1
[ 0.565065] initcall init_sel_fs+0x0/0xfa returned 0 after 0 usecs
[ 0.565067] calling selnl_init+0x0/0x6e @ 1
[ 0.565084] initcall selnl_init+0x0/0x6e returned 0 after 13 usecs
[ 0.565087] calling sel_netif_init+0x0/0x36 @ 1
[ 0.565090] initcall sel_netif_init+0x0/0x36 returned 0 after 0 usecs
[ 0.565093] calling sel_netnode_init+0x0/0x30 @ 1
[ 0.565096] initcall sel_netnode_init+0x0/0x30 returned 0 after 0 usecs
[ 0.565099] calling sel_netport_init+0x0/0x30 @ 1
[ 0.565101] initcall sel_netport_init+0x0/0x30 returned 0 after 0 usecs
[ 0.565104] calling aurule_init+0x0/0x2a @ 1
[ 0.565107] initcall aurule_init+0x0/0x2a returned 0 after 0 usecs
[ 0.565111] calling crypto_algapi_init+0x0/0x11 @ 1
[ 0.565116] initcall crypto_algapi_init+0x0/0x11 returned 0 after 1 usecs
[ 0.565119] calling seqiv_module_init+0x0/0x14 @ 1
[ 0.565123] initcall seqiv_module_init+0x0/0x14 returned 0 after 0 usecs
[ 0.565129] calling dh_init+0x0/0x20 @ 1
[ 0.565228] alg: self-tests disabled
[ 0.565245] initcall dh_init+0x0/0x20 returned 0 after 109 usecs
[ 0.565250] calling rsa_init+0x0/0x40 @ 1
[ 0.565483] initcall rsa_init+0x0/0x40 returned 0 after 210 usecs
[ 0.565495] calling hmac_module_init+0x0/0x14 @ 1
[ 0.565499] initcall hmac_module_init+0x0/0x14 returned 0 after 0 usecs
[ 0.565502] calling crypto_null_mod_init+0x0/0x46 @ 1
[ 0.565816] initcall crypto_null_mod_init+0x0/0x46 returned 0 after 301 usecs
[ 0.565839] calling md5_mod_init+0x0/0x14 @ 1
[ 0.565937] initcall md5_mod_init+0x0/0x14 returned 0 after 92 usecs
[ 0.565941] calling sha1_generic_mod_init+0x0/0x14 @ 1
[ 0.566005] initcall sha1_generic_mod_init+0x0/0x14 returned 0 after 58 usecs
[ 0.566009] calling sha256_generic_mod_init+0x0/0x19 @ 1
[ 0.566127] initcall sha256_generic_mod_init+0x0/0x19 returned 0 after 111 usecs
[ 0.566131] calling crypto_ecb_module_init+0x0/0x14 @ 1
[ 0.566135] initcall crypto_ecb_module_init+0x0/0x14 returned 0 after 0 usecs
[ 0.566138] calling crypto_cbc_module_init+0x0/0x14 @ 1
[ 0.566141] initcall crypto_cbc_module_init+0x0/0x14 returned 0 after 0 usecs
[ 0.566144] calling crypto_module_init+0x0/0x14 @ 1
[ 0.566147] initcall crypto_module_init+0x0/0x14 returned 0 after 0 usecs
[ 0.566150] calling crypto_module_init+0x0/0x14 @ 1
[ 0.566153] initcall crypto_module_init+0x0/0x14 returned 0 after 0 usecs
[ 0.566157] calling crypto_ctr_module_init+0x0/0x38 @ 1
[ 0.566161] initcall crypto_ctr_module_init+0x0/0x38 returned 0 after 0 usecs
[ 0.566164] calling crypto_gcm_module_init+0x0/0xa7 @ 1
[ 0.566169] initcall crypto_gcm_module_init+0x0/0xa7 returned 0 after 1 usecs
[ 0.566172] calling aes_init+0x0/0x14 @ 1
[ 0.566233] initcall aes_init+0x0/0x14 returned 0 after 56 usecs
[ 0.566236] calling deflate_mod_init+0x0/0x3d @ 1
[ 0.566407] initcall deflate_mod_init+0x0/0x3d returned 0 after 163 usecs
[ 0.566411] calling crc32c_mod_init+0x0/0x14 @ 1
[ 0.566511] initcall crc32c_mod_init+0x0/0x14 returned 0 after 79 usecs
[ 0.566519] calling crct10dif_mod_init+0x0/0x14 @ 1
[ 0.566771] initcall crct10dif_mod_init+0x0/0x14 returned 0 after 229 usecs
[ 0.566781] calling lzo_mod_init+0x0/0x38 @ 1
[ 0.566999] initcall lzo_mod_init+0x0/0x38 returned 0 after 207 usecs
[ 0.567002] calling drbg_init+0x0/0x71 @ 1
[ 0.568555] initcall drbg_init+0x0/0x71 returned 0 after 1501 usecs
[ 0.568565] calling jent_mod_init+0x0/0x31 @ 1
[ 0.569658] initcall jent_mod_init+0x0/0x31 returned 0 after 1051 usecs
[ 0.569668] calling ghash_mod_init+0x0/0x14 @ 1
[ 0.569741] initcall ghash_mod_init+0x0/0x14 returned 0 after 67 usecs
[ 0.569745] calling af_alg_init+0x0/0x3a @ 1
[ 0.569749] NET: Registered protocol family 38
[ 0.569751] initcall af_alg_init+0x0/0x3a returned 0 after 3 usecs
[ 0.569755] calling algif_hash_init+0x0/0x14 @ 1
[ 0.569759] initcall algif_hash_init+0x0/0x14 returned 0 after 1 usecs
[ 0.569762] calling algif_skcipher_init+0x0/0x14 @ 1
[ 0.569766] initcall algif_skcipher_init+0x0/0x14 returned 0 after 0 usecs
[ 0.569769] calling rng_init+0x0/0x14 @ 1
[ 0.569772] initcall rng_init+0x0/0x14 returned 0 after 0 usecs
[ 0.569776] calling algif_aead_init+0x0/0x14 @ 1
[ 0.569780] initcall algif_aead_init+0x0/0x14 returned 0 after 1 usecs
[ 0.569783] calling asymmetric_key_init+0x0/0x14 @ 1
[ 0.569786] Key type asymmetric registered
[ 0.569789] initcall asymmetric_key_init+0x0/0x14 returned 0 after 2 usecs
[ 0.569792] calling x509_key_init+0x0/0x14 @ 1
[ 0.569795] Asymmetric key parser 'x509' registered
[ 0.569798] initcall x509_key_init+0x0/0x14 returned 0 after 2 usecs
[ 0.569801] calling proc_genhd_init+0x0/0x3a @ 1
[ 0.569815] initcall proc_genhd_init+0x0/0x3a returned 0 after 9 usecs
[ 0.569846] calling init_emergency_pool+0x0/0x9a @ 1
[ 0.569869] bounce: pool size: 64 pages
[ 0.569884] initcall init_emergency_pool+0x0/0x9a returned 0 after 33 usecs
[ 0.569887] calling bsg_init+0x0/0x12c @ 1
[ 0.569918] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.569921] initcall bsg_init+0x0/0x12c returned 0 after 30 usecs
[ 0.569925] calling throtl_init+0x0/0x3c @ 1
[ 0.570011] initcall throtl_init+0x0/0x3c returned 0 after 79 usecs
[ 0.570015] calling noop_init+0x0/0x14 @ 1
[ 0.570018] io scheduler noop registered
[ 0.570021] initcall noop_init+0x0/0x14 returned 0 after 2 usecs
[ 0.570024] calling deadline_init+0x0/0x14 @ 1
[ 0.570026] io scheduler deadline registered
[ 0.570029] initcall deadline_init+0x0/0x14 returned 0 after 1 usecs
[ 0.570033] calling cfq_init+0x0/0x6e @ 1
[ 0.570166] io scheduler cfq registered (default)
[ 0.570170] initcall cfq_init+0x0/0x6e returned 0 after 130 usecs
[ 0.570174] calling deadline_init+0x0/0x14 @ 1
[ 0.570176] io scheduler mq-deadline registered
[ 0.570179] initcall deadline_init+0x0/0x14 returned 0 after 2 usecs
[ 0.570183] calling kyber_init+0x0/0x14 @ 1
[ 0.570184] io scheduler kyber registered
[ 0.570187] initcall kyber_init+0x0/0x14 returned 0 after 1 usecs
[ 0.570191] calling crc_t10dif_mod_init+0x0/0x35 @ 1
[ 0.570198] initcall crc_t10dif_mod_init+0x0/0x35 returned 0 after 4 usecs
[ 0.570202] calling libcrc32c_mod_init+0x0/0x25 @ 1
[ 0.570207] initcall libcrc32c_mod_init+0x0/0x25 returned 0 after 2 usecs
[ 0.570212] calling percpu_counter_startup+0x0/0x50 @ 1
[ 0.570278] initcall percpu_counter_startup+0x0/0x50 returned 0 after 53 usecs
[ 0.570286] calling audit_classes_init+0x0/0x4f @ 1
[ 0.570293] initcall audit_classes_init+0x0/0x4f returned 0 after 4 usecs
[ 0.570298] calling sg_pool_init+0x0/0xab @ 1
[ 0.570342] initcall sg_pool_init+0x0/0xab returned 0 after 38 usecs
[ 0.570346] calling phy_core_init+0x0/0x44 @ 1
[ 0.570359] initcall phy_core_init+0x0/0x44 returned 0 after 9 usecs
[ 0.570363] calling pci_proc_init+0x0/0x63 @ 1
[ 0.570428] initcall pci_proc_init+0x0/0x63 returned 0 after 59 usecs
[ 0.570432] calling pcie_portdrv_init+0x0/0x34 @ 1
[ 0.571230] probe of 0000:00:15.0 returned 1 after 778 usecs
[ 0.571711] probe of 0000:00:15.1 returned 1 after 470 usecs
[ 0.571738] initcall pcie_portdrv_init+0x0/0x34 returned 0 after 1270 usecs
[ 0.571743] calling aer_service_init+0x0/0x33 @ 1
[ 0.571758] initcall aer_service_init+0x0/0x33 returned 0 after 10 usecs
[ 0.571762] calling pcie_pme_service_init+0x0/0x14 @ 1
[ 0.571896] pcieport 0000:00:15.0: Signaling PME with IRQ 24
[ 0.571908] probe of 0000:00:15.0:pcie001 returned 1 after 140 usecs
[ 0.571957] pcieport 0000:00:15.1: Signaling PME with IRQ 25
[ 0.571968] probe of 0000:00:15.1:pcie001 returned 1 after 46 usecs
[ 0.571980] initcall pcie_pme_service_init+0x0/0x14 returned 0 after 208 usecs
[ 0.571984] calling dpc_service_init+0x0/0x14 @ 1
[ 0.571998] initcall dpc_service_init+0x0/0x14 returned 0 after 9 usecs
[ 0.572002] calling pci_stub_init+0x0/0x133 @ 1
[ 0.572027] initcall pci_stub_init+0x0/0x133 returned 0 after 20 usecs
[ 0.572033] calling acpi_button_driver_init+0x0/0x20 @ 1
[ 0.572154] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.572187] ACPI: Power Button [PWRB]
[ 0.572203] probe of PNP0C0C:00 returned 1 after 129 usecs
[ 0.572278] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.572294] ACPI: Power Button [PWRF]
[ 0.572386] probe of LNXPWRBN:00 returned 1 after 175 usecs
[ 0.572399] initcall acpi_button_driver_init+0x0/0x20 returned 0 after 352 usecs
[ 0.572405] calling acpi_fan_driver_init+0x0/0x16 @ 1
[ 0.572427] initcall acpi_fan_driver_init+0x0/0x16 returned 0 after 17 usecs
[ 0.572432] calling acpi_processor_driver_init+0x0/0x8d @ 1
[ 0.572813] probe of cpu0 returned 1 after 369 usecs
[ 0.573137] probe of cpu1 returned 1 after 279 usecs
[ 0.573162] initcall acpi_processor_driver_init+0x0/0x8d returned 0 after 703 usecs
[ 0.573170] calling acpi_thermal_init+0x0/0x78 @ 1
[ 0.574176] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.574181] ACPI: Thermal Zone [TZ00] (52 C)
[ 0.574199] probe of LNXTHERM:00 returned 1 after 902 usecs
[ 0.574244] initcall acpi_thermal_init+0x0/0x78 returned 0 after 1038 usecs
[ 0.574252] calling acpi_hed_driver_init+0x0/0x14 @ 1
[ 0.574283] initcall acpi_hed_driver_init+0x0/0x14 returned 0 after 25 usecs
[ 0.574287] calling gpio_clk_driver_init+0x0/0x16 @ 1
[ 0.574305] initcall gpio_clk_driver_init+0x0/0x16 returned 0 after 15 usecs
[ 0.574309] calling plt_clk_driver_init+0x0/0x16 @ 1
[ 0.574322] initcall plt_clk_driver_init+0x0/0x16 returned 0 after 9 usecs
[ 0.574325] calling dw_pci_driver_init+0x0/0x1b @ 1
[ 0.574360] initcall dw_pci_driver_init+0x0/0x1b returned 0 after 30 usecs
[ 0.574363] calling n_null_init+0x0/0x21 @ 1
[ 0.574367] initcall n_null_init+0x0/0x21 returned 0 after 0 usecs
[ 0.574369] calling pty_init+0x0/0x1d6 @ 1
[ 0.574475] initcall pty_init+0x0/0x1d6 returned 0 after 100 usecs
[ 0.574479] calling sysrq_init+0x0/0x68 @ 1
[ 0.574488] initcall sysrq_init+0x0/0x68 returned 0 after 6 usecs
[ 0.574492] initcall serial8250_init blacklisted
[ 0.574495] calling serial_pci_driver_init+0x0/0x1b @ 1
[ 0.574558] initcall serial_pci_driver_init+0x0/0x1b returned 0 after 58 usecs
[ 0.574562] calling dw8250_platform_driver_init+0x0/0x16 @ 1
[ 0.574580] initcall dw8250_platform_driver_init+0x0/0x16 returned 0 after 14 usecs
[ 0.574584] calling lpss8250_pci_driver_init+0x0/0x1b @ 1
[ 0.574604] initcall lpss8250_pci_driver_init+0x0/0x1b returned 0 after 16 usecs
[ 0.574608] calling mid8250_pci_driver_init+0x0/0x1b @ 1
[ 0.574631] initcall mid8250_pci_driver_init+0x0/0x1b returned 0 after 19 usecs
[ 0.574635] calling raw_init+0x0/0x12d @ 1
[ 0.574770] initcall raw_init+0x0/0x12d returned 0 after 128 usecs
[ 0.574774] calling hpet_init+0x0/0x5c @ 1
[ 0.575033] initcall hpet_init+0x0/0x5c returned 0 after 242 usecs
[ 0.575040] calling nvram_init+0x0/0x75 @ 1
[ 0.575281] Non-volatile memory driver v1.3
[ 0.575285] initcall nvram_init+0x0/0x75 returned 0 after 235 usecs
[ 0.575289] calling hwrng_modinit+0x0/0x71 @ 1
[ 0.575419] initcall hwrng_modinit+0x0/0x71 returned 0 after 124 usecs
[ 0.575423] calling mod_init+0x0/0x94 @ 1
[ 0.575441] initcall mod_init+0x0/0x94 returned -19 after 14 usecs
[ 0.575444] calling agp_init+0x0/0x29 @ 1
[ 0.575445] Linux agpgart interface v0.103
[ 0.575448] initcall agp_init+0x0/0x29 returned 0 after 1 usecs
[ 0.575452] calling agp_amd64_mod_init+0x0/0xf @ 1
[ 0.575541] probe of 0000:00:00.0 returned 0 after 28 usecs
[ 0.575559] probe of 0000:00:01.0 returned 0 after 14 usecs
[ 0.575643] probe of 0000:00:01.1 returned 0 after 79 usecs
[ 0.575730] probe of 0000:00:11.0 returned 0 after 83 usecs
[ 0.575743] probe of 0000:00:12.0 returned 0 after 9 usecs
[ 0.575761] probe of 0000:00:12.2 returned 0 after 14 usecs
[ 0.575774] probe of 0000:00:13.0 returned 0 after 9 usecs
[ 0.575792] probe of 0000:00:13.2 returned 0 after 14 usecs
[ 0.575805] probe of 0000:00:14.0 returned 0 after 9 usecs
[ 0.575821] probe of 0000:00:14.2 returned 0 after 13 usecs
[ 0.575835] probe of 0000:00:14.3 returned 0 after 10 usecs
[ 0.575874] probe of 0000:00:14.4 returned 0 after 36 usecs
[ 0.575888] probe of 0000:00:14.5 returned 0 after 9 usecs
[ 0.575901] probe of 0000:00:18.0 returned 0 after 9 usecs
[ 0.575913] probe of 0000:00:18.1 returned 0 after 9 usecs
[ 0.575925] probe of 0000:00:18.2 returned 0 after 8 usecs
[ 0.575939] probe of 0000:00:18.3 returned 0 after 10 usecs
[ 0.575951] probe of 0000:00:18.4 returned 0 after 8 usecs
[ 0.575963] probe of 0000:00:18.5 returned 0 after 8 usecs
[ 0.575975] probe of 0000:00:18.6 returned 0 after 8 usecs
[ 0.575987] probe of 0000:00:18.7 returned 0 after 8 usecs
[ 0.576081] probe of 0000:03:00.0 returned 0 after 91 usecs
[ 0.576100] initcall agp_amd64_mod_init+0x0/0xf returned -19 after 629 usecs
[ 0.576104] calling agp_intel_init+0x0/0x2a @ 1
[ 0.576134] initcall agp_intel_init+0x0/0x2a returned 0 after 25 usecs
[ 0.576138] calling agp_sis_init+0x0/0x2a @ 1
[ 0.576162] initcall agp_sis_init+0x0/0x2a returned 0 after 20 usecs
[ 0.576165] calling agp_via_init+0x0/0x2a @ 1
[ 0.576190] initcall agp_via_init+0x0/0x2a returned 0 after 21 usecs
[ 0.576194] calling drm_kms_helper_init+0x0/0x18 @ 1
[ 0.576209] initcall drm_kms_helper_init+0x0/0x18 returned 0 after 11 usecs
[ 0.576212] calling drm_core_init+0x0/0xd1 @ 1
[ 0.576242] initcall drm_core_init+0x0/0xd1 returned 0 after 25 usecs
[ 0.576245] calling ttm_init+0x0/0x5f @ 1
[ 0.576275] initcall ttm_init+0x0/0x5f returned 0 after 26 usecs
[ 0.576279] calling radeon_init+0x0/0x9b @ 1
[ 0.576281] [drm] radeon kernel modesetting enabled.
[ 0.577200] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x1002:0x9802 0x00).
[ 0.577315] ATOM BIOS: AMD
[ 0.577390] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
[ 0.577394] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF
[ 0.577401] [drm] Detected VRAM RAM=384M, BAR=256M
[ 0.577403] [drm] RAM width 32bits DDR
[ 0.577604] [TTM] Zone kernel: Available graphics memory: 418792 kiB
[ 0.577608] [TTM] Zone highmem: Available graphics memory: 1856104 kiB
[ 0.577610] [TTM] Initializing pool allocator
[ 0.577620] [TTM] Initializing DMA pool allocator
[ 0.577664] [drm] radeon: 384M of VRAM memory ready
[ 0.577673] [drm] radeon: 1024M of GTT memory ready.
[ 0.577702] [drm] Loading PALM Microcode
[ 0.577711] [drm] Internal thermal controller without fan control
[ 0.577799] [drm] Found smc ucode version: 0x00010601
[ 0.577988] [drm] radeon: dpm initialized
[ 0.578028] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 0.591490] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
[ 0.591678] radeon 0000:00:01.0: WB enabled
[ 0.591685] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0x(ptrval)
[ 0.591688] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0x(ptrval)
[ 0.592575] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x(ptrval)
[ 0.592579] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.592580] [drm] Driver supports precise vblank timestamp query.
[ 0.592583] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
[ 0.592669] radeon 0000:00:01.0: radeon: using MSI.
[ 0.592707] [drm] radeon: irq initialized.
[ 0.609363] [drm] ring test on 0 succeeded in 1 usecs
[ 0.609372] [drm] ring test on 3 succeeded in 3 usecs
[ 0.655438] [drm] ring test on 5 succeeded in 1 usecs
[ 0.675463] [drm] UVD initialized successfully.
[ 0.675693] [drm] ib test on ring 0 succeeded in 0 usecs
[ 0.675751] [drm] ib test on ring 3 succeeded in 0 usecs
[ 1.197952] [drm] ib test on ring 5 succeeded
[ 1.218697] [drm] Radeon Display Connectors
[ 1.218699] [drm] Connector 0:
[ 1.218700] [drm] HDMI-A-1
[ 1.218701] [drm] HPD1
[ 1.218704] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 1.218705] [drm] Encoders:
[ 1.218707] [drm] DFP1: INTERNAL_UNIPHY
[ 1.218709] [drm] Connector 1:
[ 1.218710] [drm] HDMI-A-2
[ 1.218710] [drm] HPD2
[ 1.218713] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 1.218714] [drm] Encoders:
[ 1.218722] [drm] DFP2: INTERNAL_UNIPHY
[ 1.218724] [drm] Connector 2:
[ 1.218725] [drm] VGA-1
[ 1.218727] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[ 1.218728] [drm] Encoders:
[ 1.218730] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 1.259787] [drm] fb mappable at 0xE0366000
[ 1.259790] [drm] vram apper at 0xE0000000
[ 1.259791] [drm] size 5242880
[ 1.259792] [drm] fb depth is 24
[ 1.259793] [drm] pitch is 5120
[ 1.260018] fbcon: radeondrmfb (fb0) is primary device
[ 1.305094] Console: switching to colour frame buffer device 160x64
[ 1.315866] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 1.315974] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0
[ 1.315996] probe of 0000:00:01.0 returned 1 after 739693 usecs
[ 1.316132] initcall radeon_init+0x0/0x9b returned 0 after 722502 usecs
[ 1.316139] calling cn_proc_init+0x0/0x35 @ 1
[ 1.316145] initcall cn_proc_init+0x0/0x35 returned 0 after 2 usecs
[ 1.316150] calling topology_sysfs_init+0x0/0x40 @ 1
[ 1.316180] initcall topology_sysfs_init+0x0/0x40 returned 0 after 25 usecs
[ 1.316184] calling cacheinfo_sysfs_init+0x0/0x2a @ 1
[ 1.316642] initcall cacheinfo_sysfs_init+0x0/0x2a returned 173 after 441 usecs
[ 1.316646] calling init_sd+0x0/0x136 @ 1
[ 1.316693] initcall init_sd+0x0/0x136 returned 0 after 41 usecs
[ 1.316697] calling init_sr+0x0/0x42 @ 1
[ 1.316722] initcall init_sr+0x0/0x42 returned 0 after 20 usecs
[ 1.316725] calling init_sg+0x0/0x18d @ 1
[ 1.316752] initcall init_sg+0x0/0x18d returned 0 after 22 usecs
[ 1.316756] calling ahci_pci_driver_init+0x0/0x1b @ 1
[ 1.316799] ahci 0000:00:11.0: version 3.0
[ 1.317476] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 1.317483] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part
[ 1.320026] scsi host0: ahci
[ 1.320661] scsi host1: ahci
[ 1.321104] scsi host2: ahci
[ 1.321535] scsi host3: ahci
[ 1.322055] scsi host4: ahci
[ 1.322465] scsi host5: ahci
[ 1.322667] ata1: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b100 irq 19
[ 1.322671] ata2: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b180 irq 19
[ 1.322675] ata3: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b200 irq 19
[ 1.322678] ata4: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b280 irq 19
[ 1.322682] ata5: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b300 irq 19
[ 1.322685] ata6: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b380 irq 19
[ 1.322716] probe of 0000:00:11.0 returned 1 after 5935 usecs
[ 1.322920] initcall ahci_pci_driver_init+0x0/0x1b returned 0 after 6008 usecs
[ 1.322928] calling net_olddevs_init+0x0/0x53 @ 1
[ 1.322939] initcall net_olddevs_init+0x0/0x53 returned 0 after 7 usecs
[ 1.322943] calling fixed_mdio_bus_init+0x0/0xd8 @ 1
[ 1.323024] libphy: Fixed MDIO Bus: probed
[ 1.323029] initcall fixed_mdio_bus_init+0x0/0xd8 returned 0 after 79 usecs
[ 1.323033] calling cdrom_init+0x0/0x1d @ 1
[ 1.323048] initcall cdrom_init+0x0/0x1d returned 0 after 11 usecs
[ 1.323053] calling usb_serial_init+0x0/0x143 @ 1
[ 1.323230] usbcore: registered new interface driver usbserial_generic
[ 1.323244] usbserial: USB Serial support registered for generic
[ 1.323250] initcall usb_serial_init+0x0/0x143 returned 0 after 187 usecs
[ 1.323254] calling i8042_init+0x0/0x41a @ 1
[ 1.323289] probe of 00:01 returned 1 after 20 usecs
[ 1.323305] probe of 00:03 returned 1 after 10 usecs
[ 1.323330] probe of 00:02 returned 1 after 10 usecs
[ 1.323344] probe of 00:04 returned 1 after 9 usecs
[ 1.323353] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.327632] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.327653] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.327849] probe of i8042 returned 1 after 4342 usecs
[ 1.327873] initcall i8042_init+0x0/0x41a returned 0 after 4500 usecs
[ 1.327881] calling serport_init+0x0/0x30 @ 1
[ 1.327885] initcall serport_init+0x0/0x30 returned 0 after 0 usecs
[ 1.327889] calling input_leds_init+0x0/0x14 @ 1
[ 1.327895] initcall input_leds_init+0x0/0x14 returned 0 after 2 usecs
[ 1.327900] calling mousedev_init+0x0/0x56 @ 1
[ 1.328209] mousedev: PS/2 mouse device common for all mice
[ 1.328213] initcall mousedev_init+0x0/0x56 returned 0 after 302 usecs
[ 1.328218] calling evdev_init+0x0/0x14 @ 1
[ 1.328494] initcall evdev_init+0x0/0x14 returned 0 after 265 usecs
[ 1.328498] calling atkbd_init+0x0/0x25 @ 1
[ 1.328535] initcall atkbd_init+0x0/0x25 returned 0 after 32 usecs
[ 1.328540] calling psmouse_init+0x0/0x7e @ 1
[ 1.328693] initcall psmouse_init+0x0/0x7e returned 0 after 144 usecs
[ 1.328697] calling cmos_init+0x0/0x65 @ 1
[ 1.328846] rtc_cmos 00:00: RTC can wake from S4
[ 1.329206] rtc_cmos 00:00: registered as rtc0
[ 1.329246] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
[ 1.329252] probe of 00:00 returned 1 after 515 usecs
[ 1.329268] initcall cmos_init+0x0/0x65 returned 0 after 552 usecs
[ 1.329273] calling sensors_w83627ehf_init+0x0/0x16f @ 1
[ 1.329376] w83627ehf: Found NCT6775F chip at 0x290
[ 1.329949] w83627ehf w83627ehf.656: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 1.329988] probe of w83627ehf.656 returned 1 after 553 usecs
[ 1.329994] initcall sensors_w83627ehf_init+0x0/0x16f returned 0 after 699 usecs
[ 1.329999] calling dm_init+0x0/0x3c @ 1
[ 1.330082] device-mapper: uevent: version 1.0.3
[ 1.330316] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[ 1.330321] initcall dm_init+0x0/0x3c returned 0 after 310 usecs
[ 1.330326] calling dm_crypt_init+0x0/0x2d @ 1
[ 1.330330] initcall dm_crypt_init+0x0/0x2d returned 0 after 0 usecs
[ 1.330336] calling cpufreq_gov_powersave_init+0x0/0x14 @ 1
[ 1.330342] initcall cpufreq_gov_powersave_init+0x0/0x14 returned 0 after 2 usecs
[ 1.330346] calling cpufreq_gov_userspace_init+0x0/0x14 @ 1
[ 1.330351] initcall cpufreq_gov_userspace_init+0x0/0x14 returned 0 after 0 usecs
[ 1.330355] calling cpufreq_gov_dbs_init+0x0/0x14 @ 1
[ 1.330360] initcall cpufreq_gov_dbs_init+0x0/0x14 returned 0 after 0 usecs
[ 1.330364] calling intel_pstate_init+0x0/0x340 @ 1
[ 1.330370] initcall intel_pstate_init+0x0/0x340 returned -19 after 1 usecs
[ 1.330375] calling ledtrig_disk_init+0x0/0x48 @ 1
[ 1.330382] initcall ledtrig_disk_init+0x0/0x48 returned 0 after 3 usecs
[ 1.330387] calling ledtrig_panic_init+0x0/0x34 @ 1
[ 1.330392] initcall ledtrig_panic_init+0x0/0x34 returned 0 after 1 usecs
[ 1.330397] calling dmi_sysfs_init+0x0/0xc1 @ 1
[ 1.330503] initcall dmi_sysfs_init+0x0/0xc1 returned 0 after 98 usecs
[ 1.330506] calling hid_init+0x0/0x5d @ 1
[ 1.330535] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.330557] initcall hid_init+0x0/0x5d returned 0 after 46 usecs
[ 1.330561] calling hid_generic_init+0x0/0x1b @ 1
[ 1.330580] initcall hid_generic_init+0x0/0x1b returned 0 after 15 usecs
[ 1.330583] calling ite_driver_init+0x0/0x1b @ 1
[ 1.330597] initcall ite_driver_init+0x0/0x1b returned 0 after 10 usecs
[ 1.330600] calling magicmouse_driver_init+0x0/0x1b @ 1
[ 1.330620] initcall magicmouse_driver_init+0x0/0x1b returned 0 after 16 usecs
[ 1.330623] calling ntrig_driver_init+0x0/0x1b @ 1
[ 1.330643] initcall ntrig_driver_init+0x0/0x1b returned 0 after 15 usecs
[ 1.330645] calling hid_init+0x0/0x58 @ 1
[ 1.330668] usbcore: registered new interface driver usbhid
[ 1.330669] usbhid: USB HID core driver
[ 1.330672] initcall hid_init+0x0/0x58 returned 0 after 23 usecs
[ 1.330675] calling pmc_atom_init+0x0/0x226 @ 1
[ 1.330695] initcall pmc_atom_init+0x0/0x226 returned -19 after 16 usecs
[ 1.330698] calling extcon_class_init+0x0/0x1b @ 1
[ 1.330708] initcall extcon_class_init+0x0/0x1b returned 0 after 6 usecs
[ 1.330711] calling powercap_init+0x0/0x1fa @ 1
[ 1.330814] initcall powercap_init+0x0/0x1fa returned 0 after 97 usecs
[ 1.330821] calling pm_check_save_msr+0x0/0x20 @ 1
[ 1.330826] initcall pm_check_save_msr+0x0/0x20 returned 0 after 1 usecs
[ 1.330830] calling sock_diag_init+0x0/0x34 @ 1
[ 1.330864] initcall sock_diag_init+0x0/0x34 returned 0 after 29 usecs
[ 1.330869] calling blackhole_init+0x0/0x14 @ 1
[ 1.330874] initcall blackhole_init+0x0/0x14 returned 0 after 1 usecs
[ 1.330878] calling fq_codel_module_init+0x0/0x14 @ 1
[ 1.330882] initcall fq_codel_module_init+0x0/0x14 returned 0 after 0 usecs
[ 1.330886] calling init_cgroup_cls+0x0/0x14 @ 1
[ 1.330889] initcall init_cgroup_cls+0x0/0x14 returned 0 after 0 usecs
[ 1.330893] calling xt_init+0x0/0xb2 @ 1
[ 1.330898] initcall xt_init+0x0/0xb2 returned 0 after 2 usecs
[ 1.330902] calling tcpudp_mt_init+0x0/0x19 @ 1
[ 1.330907] initcall tcpudp_mt_init+0x0/0x19 returned 0 after 1 usecs
[ 1.330912] calling gre_offload_init+0x0/0x47 @ 1
[ 1.330916] initcall gre_offload_init+0x0/0x47 returned 0 after 0 usecs
[ 1.330920] calling sysctl_ipv4_init+0x0/0x45 @ 1
[ 1.331015] initcall sysctl_ipv4_init+0x0/0x45 returned 0 after 88 usecs
[ 1.331019] calling ip_tables_init+0x0/0x84 @ 1
[ 1.331034] initcall ip_tables_init+0x0/0x84 returned 0 after 10 usecs
[ 1.331038] calling iptable_filter_init+0x0/0x45 @ 1
[ 1.331283] initcall iptable_filter_init+0x0/0x45 returned 0 after 235 usecs
[ 1.331288] calling reject_tg_init+0x0/0x14 @ 1
[ 1.331292] initcall reject_tg_init+0x0/0x14 returned 0 after 0 usecs
[ 1.331296] calling cubictcp_register+0x0/0x71 @ 1
[ 1.331301] initcall cubictcp_register+0x0/0x71 returned 0 after 1 usecs
[ 1.331305] calling xfrm_user_init+0x0/0x45 @ 1
[ 1.331306] Initializing XFRM netlink socket
[ 1.331315] initcall xfrm_user_init+0x0/0x45 returned 0 after 6 usecs
[ 1.331319] calling inet6_init+0x0/0x32d @ 1
[ 1.331595] NET: Registered protocol family 10
[ 1.332296] Segment Routing with IPv6
[ 1.332340] initcall inet6_init+0x0/0x32d returned 0 after 989 usecs
[ 1.332345] calling mip6_init+0x0/0xac @ 1
[ 1.332347] mip6: Mobile IPv6
[ 1.332351] initcall mip6_init+0x0/0xac returned 0 after 2 usecs
[ 1.332355] calling packet_init+0x0/0x3e @ 1
[ 1.332358] NET: Registered protocol family 17
[ 1.332365] initcall packet_init+0x0/0x3e returned 0 after 5 usecs
[ 1.332371] calling mcheck_init_device+0x0/0x105 @ 1
[ 1.332864] initcall mcheck_init_device+0x0/0x105 returned 0 after 462 usecs
[ 1.333108] calling mcheck_late_init+0x0/0x69 @ 1
[ 1.333137] initcall mcheck_late_init+0x0/0x69 returned 0 after 24 usecs
[ 1.333143] calling severities_debugfs_init+0x0/0x3a @ 1
[ 1.333150] initcall severities_debugfs_init+0x0/0x3a returned 0 after 2 usecs
[ 1.333155] calling threshold_init_device+0x0/0x47 @ 1
[ 1.333160] initcall threshold_init_device+0x0/0x47 returned 0 after 0 usecs
[ 1.333163] calling hpet_insert_resource+0x0/0x24 @ 1
[ 1.333170] initcall hpet_insert_resource+0x0/0x24 returned 0 after 4 usecs
[ 1.333174] calling lapic_insert_resource+0x0/0x4b @ 1
[ 1.333178] initcall lapic_insert_resource+0x0/0x4b returned 0 after 0 usecs
[ 1.333183] calling print_ICs+0x0/0x17b @ 1
[ 1.333186] initcall print_ICs+0x0/0x17b returned 0 after 0 usecs
[ 1.333190] calling print_ipi_mode+0x0/0x2b @ 1
[ 1.333192] Using IPI No-Shortcut mode
[ 1.333195] initcall print_ipi_mode+0x0/0x2b returned 0 after 1 usecs
[ 1.333200] calling pat_memtype_list_init+0x0/0x36 @ 1
[ 1.333208] initcall pat_memtype_list_init+0x0/0x36 returned 0 after 3 usecs
[ 1.333213] calling create_tlb_single_page_flush_ceiling+0x0/0x28 @ 1
[ 1.333220] initcall create_tlb_single_page_flush_ceiling+0x0/0x28 returned 0 after 2 usecs
[ 1.333226] calling init_oops_id+0x0/0x50 @ 1
[ 1.333234] initcall init_oops_id+0x0/0x50 returned 0 after 4 usecs
[ 1.333238] calling sched_clock_init_late+0x0/0x89 @ 1
[ 1.333243] sched_clock: Marking stable (1329713712, 3073265)->(1437284423, -104497446)
[ 1.333368] initcall sched_clock_init_late+0x0/0x89 returned 0 after 122 usecs
[ 1.333371] calling sched_init_debug+0x0/0x3a @ 1
[ 1.333381] initcall sched_init_debug+0x0/0x3a returned 0 after 6 usecs
[ 1.333385] calling pm_qos_power_init+0x0/0x9a @ 1
[ 1.334103] initcall pm_qos_power_init+0x0/0x9a returned 0 after 687 usecs
[ 1.334112] calling pm_debugfs_init+0x0/0x24 @ 1
[ 1.334120] initcall pm_debugfs_init+0x0/0x24 returned 0 after 4 usecs
[ 1.334124] calling printk_late_init+0x0/0x106 @ 1
[ 1.334130] initcall printk_late_init+0x0/0x106 returned 0 after 2 usecs
[ 1.334135] calling tk_debug_sleep_time_init+0x0/0x3c @ 1
[ 1.334142] initcall tk_debug_sleep_time_init+0x0/0x3c returned 0 after 2 usecs
[ 1.334147] calling debugfs_kprobe_init+0x0/0xb7 @ 1
[ 1.334174] initcall debugfs_kprobe_init+0x0/0xb7 returned 0 after 22 usecs
[ 1.334179] calling taskstats_init+0x0/0x38 @ 1
[ 1.334200] registered taskstats version 1
[ 1.334204] initcall taskstats_init+0x0/0x38 returned 0 after 21 usecs
[ 1.334209] calling load_system_certificate_list+0x0/0xc4 @ 1
[ 1.334210] Loading compiled-in X.509 certificates
[ 1.334214] initcall load_system_certificate_list+0x0/0xc4 returned 0 after 1 usecs
[ 1.334219] calling fault_around_debugfs+0x0/0x35 @ 1
[ 1.334226] initcall fault_around_debugfs+0x0/0x35 returned 0 after 3 usecs
[ 1.334231] calling max_swapfiles_check+0x0/0xc @ 1
[ 1.334235] initcall max_swapfiles_check+0x0/0xc returned 0 after 0 usecs
[ 1.334239] calling init_zswap+0x0/0x3a7 @ 1
[ 1.334291] zswap: loaded using pool lzo/zbud
[ 1.334460] initcall init_zswap+0x0/0x3a7 returned 0 after 211 usecs
[ 1.334464] calling split_huge_pages_debugfs+0x0/0x35 @ 1
[ 1.334470] initcall split_huge_pages_debugfs+0x0/0x35 returned 0 after 2 usecs
[ 1.334473] calling kmemleak_late_init+0x0/0x8d @ 1
[ 1.334487] initcall kmemleak_late_init+0x0/0x8d returned -12 after 10 usecs
[ 1.334490] calling check_early_ioremap_leak+0x0/0x38 @ 1
[ 1.334494] initcall check_early_ioremap_leak+0x0/0x38 returned 0 after 0 usecs
[ 1.334497] calling set_hardened_usercopy+0x0/0x28 @ 1
[ 1.334500] initcall set_hardened_usercopy+0x0/0x28 returned 1 after 0 usecs
[ 1.334504] calling init_root_keyring+0x0/0xf @ 1
[ 1.334540] initcall init_root_keyring+0x0/0xf returned 0 after 32 usecs
[ 1.334543] calling big_key_init+0x0/0xa8 @ 1
[ 1.336098] Key type big_key registered
[ 1.336112] initcall big_key_init+0x0/0xa8 returned 0 after 1521 usecs
[ 1.336119] calling prandom_reseed+0x0/0x27 @ 1
[ 1.336132] initcall prandom_reseed+0x0/0x27 returned 0 after 9 usecs
[ 1.336136] calling init_error_injection+0x0/0x61 @ 1
[ 1.336288] initcall init_error_injection+0x0/0x61 returned 0 after 144 usecs
[ 1.336293] calling pci_resource_alignment_sysfs_init+0x0/0x23 @ 1
[ 1.336307] initcall pci_resource_alignment_sysfs_init+0x0/0x23 returned 0 after 9 usecs
[ 1.336310] calling pci_sysfs_init+0x0/0x47 @ 1
[ 1.336622] initcall pci_sysfs_init+0x0/0x47 returned 0 after 299 usecs
[ 1.336626] calling clk_debug_init+0x0/0xe7 @ 1
[ 1.336654] initcall clk_debug_init+0x0/0xe7 returned 0 after 24 usecs
[ 1.336659] calling deferred_probe_initcall+0x0/0x90 @ 1
[ 1.336718] initcall deferred_probe_initcall+0x0/0x90 returned 0 after 52 usecs
[ 1.336724] calling late_resume_init+0x0/0xf9 @ 1
[ 1.336727] Magic number: 2:696:165
[ 1.336847] initcall late_resume_init+0x0/0xf9 returned 0 after 116 usecs
[ 1.336852] calling sync_debugfs_init+0x0/0x51 @ 1
[ 1.336864] initcall sync_debugfs_init+0x0/0x51 returned 0 after 8 usecs
[ 1.336869] calling rtc_hctosys+0x0/0xee @ 1
[ 1.336989] rtc_cmos 00:00: setting system clock to 2018-09-19 06:09:46 UTC (1537337386)
[ 1.336994] initcall rtc_hctosys+0x0/0xee returned 0 after 118 usecs
[ 1.336999] calling firmware_memmap_init+0x0/0x2d @ 1
[ 1.337046] initcall firmware_memmap_init+0x0/0x2d returned 0 after 41 usecs
[ 1.337050] calling pci_mmcfg_late_insert_resources+0x0/0x49 @ 1
[ 1.337054] initcall pci_mmcfg_late_insert_resources+0x0/0x49 returned 0 after 0 usecs
[ 1.337059] calling tcp_congestion_default+0x0/0x19 @ 1
[ 1.337064] initcall tcp_congestion_default+0x0/0x19 returned 0 after 1 usecs
[ 1.337070] calling clear_boot_tracer+0x0/0x2a @ 1
[ 1.337075] initcall clear_boot_tracer+0x0/0x2a returned 0 after 0 usecs
[ 1.337080] calling tracing_set_default_clock+0x0/0x36 @ 1
[ 1.337084] initcall tracing_set_default_clock+0x0/0x36 returned 0 after 0 usecs
[ 1.337090] calling acpi_gpio_handle_deferred_request_interrupts+0x0/0xb0 @ 1
[ 1.337094] initcall acpi_gpio_handle_deferred_request_interrupts+0x0/0xb0 returned 0 after 0 usecs
[ 1.337099] calling clk_disable_unused+0x0/0x100 @ 1
[ 1.337104] initcall clk_disable_unused+0x0/0x100 returned 0 after 1 usecs
[ 1.356621] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.357199] probe of serio0 returned 1 after 28640 usecs
[ 1.401553] probe of serio1 returned 0 after 44333 usecs
[ 1.413238] probe of serio1 returned 0 after 11659 usecs
[ 1.574657] tsc: Refined TSC clocksource calibration: 1600.003 MHz
[ 1.574675] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x171027d5f29, max_idle_ns: 440795236168 ns
[ 1.574713] clocksource: Switched to clocksource tsc
[ 1.627719] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.635898] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.635953] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.636021] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.636052] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.790593] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.791780] ata1.00: ATA-9: SanDisk SDSSDP064G, 2.0.0, max UDMA/133
[ 1.791787] ata1.00: 125045424 sectors, multi 1: LBA48 NCQ (depth 32)
[ 1.792546] ata1.00: configured for UDMA/133
[ 1.793432] scsi 0:0:0:0: Direct-Access ATA SanDisk SDSSDP06 0 PQ: 0 ANSI: 5
[ 1.794097] probe of 0:0:0:0 returned 1 after 95 usecs
[ 1.794260] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.794356] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[ 1.794410] sd 0:0:0:0: [sda] Write Protect is off
[ 1.794415] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.794568] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.796518] sda: sda1
[ 1.797538] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.808611] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.808641] VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
[ 1.809668] random: fast init done
[ 1.810826] devtmpfs: mounted
[ 1.813378] Freeing unused kernel image memory: 1112K
[ 1.818662] Write protecting the kernel text: 8708k
[ 1.818987] Write protecting the kernel read-only data: 2864k
[ 1.818989] NX-protecting the kernel data: 5628k
[ 1.819265] ------------[ cut here ]------------
[ 1.819272] x86/mm: Found insecure W+X mapping at address (ptrval)/0xc00a0000
[ 1.819290] WARNING: CPU: 1 PID: 1 at arch/x86/mm/dump_pagetables.c:283 note_page+0x6c9/0x6f0
[ 1.819291] Modules linked in:
[ 1.819300] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.19.0-rc4-00081-geba2d6b34a32 #204
[ 1.819301] Hardware name: ASROCK E350M1/E350M1, BIOS 4.8-1533-gfcc2950a60 09/18/2018
[ 1.819306] EIP: note_page+0x6c9/0x6f0
[ 1.819310] Code: 89 45 d8 eb c6 b9 90 cb 88 c8 e9 e4 fa ff ff 89 54 24 08 89 54 24 04 c7 04 24 0c ce a4 c8 c6 05 66 6e be c8 01 e8 37 64 00 00 <0f> 0b 8b 56 14 e9 15 fa ff ff 8b 46 18 e9 3e fb ff ff 8d 74 26 00
[ 1.819313] EAX: 00000041 EBX: 80000000 ECX: 00000001 EDX: c8d51008
[ 1.819315] ESI: f7127f3c EDI: 00000000 EBP: f7127eec ESP: f7127ea8
[ 1.819318] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00210296
[ 1.819320] CR0: 80050033 CR2: 00000000 CR3: 08d40000 CR4: 000006f0
[ 1.819321] Call Trace:
[ 1.819334] ? set_memory_decrypted+0x10/0x10
[ 1.819337] ? set_memory_decrypted+0x10/0x10
[ 1.819341] ptdump_walk_pgd_level_core+0x2b6/0x310
[ 1.819348] ptdump_walk_pgd_level_checkwx+0x20/0x22
[ 1.819352] mark_rodata_ro+0x105/0x10d
[ 1.819357] ? rest_init+0x8a/0x8a
[ 1.819359] kernel_init+0x34/0xe5
[ 1.819363] ret_from_fork+0x1c/0x38
[ 1.819367] ---[ end trace 4e9dc382e734b1d8 ]---
[ 1.819834] x86/mm: Checked W+X mappings: FAILED, 96 W+X pages found.
[ 1.819843] Run /lib/systemd/systemd-bootchart as init process
[ 1.929033] random: systemd-bootcha: uninitialized urandom read (16 bytes read)
[ 2.096067] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 2.107854] systemd[1]: Detected architecture x86.
[ 2.112638] systemd[1]: Set hostname to <kodi>.
[ 2.526976] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.527451] systemd[1]: Listening on Journal Socket.
[ 2.527904] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.531144] systemd[1]: Mounting Huge Pages File System...
[ 2.531842] systemd[1]: Listening on Journal Audit Socket.
[ 2.543416] systemd[1]: Listening on Process Core Dump Socket.
[ 2.543726] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.545180] systemd[1]: Attaching egress BPF program to cgroup /sys/fs/cgroup/unified/system.slice/systemd-journald.service failed: Invalid argument
[ 2.546963] systemd[1]: Starting Journal Service...
[ 2.752555] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 2.896470] systemd-journald[127]: Received request to flush runtime journal from PID 1
[ 3.297117] calling coreboot_bus_init+0x0/0x1000 [coreboot_table] @ 154
[ 3.297152] initcall coreboot_bus_init+0x0/0x1000 [coreboot_table] returned 0 after 24 usecs
[ 3.303862] calling coreboot_table_acpi_init+0x0/0x1000 [coreboot_table_acpi] @ 154
[ 3.305352] probe of BOOT0000:00 returned 1 after 1456 usecs
[ 3.305576] initcall coreboot_table_acpi_init+0x0/0x1000 [coreboot_table_acpi] returned 0 after 1661 usecs
[ 3.317814] calling acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] @ 163
[ 3.320784] acpi_cpufreq: overriding BIOS provided _PSD data
[ 3.320976] initcall acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] returned 0 after 3071 usecs
[ 3.323352] calling pcc_cpufreq_init+0x0/0xebc [pcc_cpufreq] @ 163
[ 3.323363] initcall pcc_cpufreq_init+0x0/0xebc [pcc_cpufreq] returned 0 after 1 usecs
[ 3.458537] calling init_soundcore+0x0/0x1000 [soundcore] @ 159
[ 3.458562] initcall init_soundcore+0x0/0x1000 [soundcore] returned 0 after 16 usecs
[ 3.463602] calling alsa_sound_init+0x0/0x82 [snd] @ 159
[ 3.463644] initcall alsa_sound_init+0x0/0x82 [snd] returned 0 after 27 usecs
[ 3.466081] calling alsa_timer_init+0x0/0x1000 [snd_timer] @ 159
[ 3.466701] initcall alsa_timer_init+0x0/0x1000 [snd_timer] returned 0 after 593 usecs
[ 3.475817] calling alsa_pcm_init+0x0/0x1000 [snd_pcm] @ 159
[ 3.475842] initcall alsa_pcm_init+0x0/0x1000 [snd_pcm] returned 0 after 10 usecs
[ 3.498278] calling hda_bus_init+0x0/0x14 [snd_hda_core] @ 159
[ 3.498319] initcall hda_bus_init+0x0/0x14 [snd_hda_core] returned 0 after 26 usecs
[ 3.538712] calling azx_driver_init+0x0/0xfe4 [snd_hda_intel] @ 159
[ 3.540816] probe of 0000:00:01.1 returned 1 after 2071 usecs
[ 3.541302] probe of 0000:00:14.2 returned 1 after 466 usecs
[ 3.541371] initcall azx_driver_init+0x0/0xfe4 [snd_hda_intel] returned 0 after 2575 usecs
[ 3.570776] calling hdmi_driver_init+0x0/0x1000 [snd_hda_codec_hdmi] @ 185
[ 3.574927] probe of hdaudioC0D0 returned 1 after 4122 usecs
[ 3.575018] initcall hdmi_driver_init+0x0/0x1000 [snd_hda_codec_hdmi] returned 0 after 4120 usecs
[ 3.576031] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input5
[ 3.577587] calling ehci_hcd_init+0x0/0x1000 [ehci_hcd] @ 163
[ 3.577592] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.577620] initcall ehci_hcd_init+0x0/0x1000 [ehci_hcd] returned 0 after 21 usecs
[ 3.579287] calling ehci_pci_init+0x0/0x1000 [ehci_pci] @ 163
[ 3.579293] ehci-pci: EHCI PCI platform driver
[ 3.579419] calling generic_driver_init+0x0/0x1000 [snd_hda_codec_generic] @ 186
[ 3.579488] initcall generic_driver_init+0x0/0x1000 [snd_hda_codec_generic] returned 0 after 37 usecs
[ 3.580236] QUIRK: Enable AMD PLL fix
[ 3.580288] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 3.580305] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 3.580320] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 3.580421] ehci-pci 0000:00:12.2: debug port 1
[ 3.583533] ehci-pci 0000:00:12.2: irq 17, io mem 0xf014c000
[ 3.586598] calling realtek_driver_init+0x0/0x1000 [snd_hda_codec_realtek] @ 186
[ 3.588179] snd_hda_codec_realtek hdaudioC1D0: ALC892: SKU not ready 0x00000100
[ 3.588799] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line
[ 3.588804] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.588807] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 3.588810] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 3.588812] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0
[ 3.588815] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 3.588819] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 3.588823] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 3.588825] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 3.588828] snd_hda_codec_realtek hdaudioC1D0: CD=0x1c
[ 3.595715] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 3.597548] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 3.597554] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.597558] usb usb1: Product: EHCI Host Controller
[ 3.597561] usb usb1: Manufacturer: Linux 4.19.0-rc4-00081-geba2d6b34a32 ehci_hcd
[ 3.597563] usb usb1: SerialNumber: 0000:00:12.2
[ 3.597941] hub 1-0:1.0: USB hub found
[ 3.597969] hub 1-0:1.0: 5 ports detected
[ 3.599880] calling ohci_hcd_mod_init+0x0/0x1000 [ohci_hcd] @ 161
[ 3.599885] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.599907] initcall ohci_hcd_mod_init+0x0/0x1000 [ohci_hcd] returned 0 after 17 usecs
[ 3.602474] probe of 1-0:1.0 returned 1 after 4549 usecs
[ 3.604212] probe of usb1 returned 1 after 6407 usecs
[ 3.604351] probe of 0000:00:12.2 returned 1 after 25031 usecs
[ 3.604939] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 3.604958] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 3.604970] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 3.605054] ehci-pci 0000:00:13.2: debug port 1
[ 3.605125] ehci-pci 0000:00:13.2: irq 17, io mem 0xf014d000
[ 3.611523] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 3.611663] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 3.611666] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.611669] usb usb2: Product: EHCI Host Controller
[ 3.611672] usb usb2: Manufacturer: Linux 4.19.0-rc4-00081-geba2d6b34a32 ehci_hcd
[ 3.611675] usb usb2: SerialNumber: 0000:00:13.2
[ 3.616071] hub 2-0:1.0: USB hub found
[ 3.616096] hub 2-0:1.0: 5 ports detected
[ 3.617697] probe of 2-0:1.0 returned 1 after 1648 usecs
[ 3.617783] probe of usb2 returned 1 after 1867 usecs
[ 3.617871] probe of 0000:00:13.2 returned 1 after 13510 usecs
[ 3.617927] initcall ehci_pci_init+0x0/0x1000 [ehci_pci] returned 0 after 17610 usecs
[ 3.620057] calling ohci_pci_init+0x0/0x1000 [ohci_pci] @ 161
[ 3.620064] ohci-pci: OHCI PCI platform driver
[ 3.621252] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 3.621281] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 3.623005] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0148000
[ 3.644889] calling piix4_driver_init+0x0/0x1000 [i2c_piix4] @ 159
[ 3.645036] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 3.645047] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection
[ 3.645364] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0x8060
[ 3.650423] probe of 0000:00:14.0 returned 1 after 5503 usecs
[ 3.650482] initcall piix4_driver_init+0x0/0x1000 [i2c_piix4] returned 0 after 5449 usecs
[ 3.658636] probe of hdaudioC1D0 returned 1 after 72011 usecs
[ 3.658726] initcall realtek_driver_init+0x0/0x1000 [snd_hda_codec_realtek] returned 0 after 13489 usecs
[ 3.659947] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input6
[ 3.660113] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
[ 3.660242] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
[ 3.660422] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
[ 3.660574] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[ 3.660708] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[ 3.660852] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[ 3.660978] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
[ 3.676592] calling k10temp_driver_init+0x0/0x1000 [k10temp] @ 157
[ 3.676768] probe of 0000:00:18.3 returned 1 after 141 usecs
[ 3.676804] initcall k10temp_driver_init+0x0/0x1000 [k10temp] returned 0 after 199 usecs
[ 3.677022] calling rtl8169_pci_driver_init+0x0/0x1000 [r8169] @ 160
[ 3.682568] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 3.682574] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.682578] usb usb3: Product: OHCI PCI host controller
[ 3.682580] usb usb3: Manufacturer: Linux 4.19.0-rc4-00081-geba2d6b34a32 ohci_hcd
[ 3.682583] usb usb3: SerialNumber: 0000:00:12.0
[ 3.683168] hub 3-0:1.0: USB hub found
[ 3.683260] hub 3-0:1.0: 5 ports detected
[ 3.688957] calling phy_module_init+0x0/0x1000 [realtek] @ 189
[ 3.689153] initcall phy_module_init+0x0/0x1000 [realtek] returned 0 after 182 usecs
[ 3.690332] probe of r8169-300:00 returned 1 after 46 usecs
[ 3.690348] libphy: r8169: probed
[ 3.693078] r8169 0000:03:00.0 eth0: RTL8168e/8111e, bc:5f:f4:c8:d3:98, XID 2c200000, IRQ 28
[ 3.693085] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 3.697908] probe of 0000:03:00.0 returned 1 after 20865 usecs
[ 3.697968] initcall rtl8169_pci_driver_init+0x0/0x1000 [r8169] returned 0 after 8780 usecs
[ 3.698194] probe of 3-0:1.0 returned 1 after 15050 usecs
[ 3.698265] probe of usb3 returned 1 after 15218 usecs
[ 3.701035] probe of 0000:00:12.0 returned 1 after 80939 usecs
[ 3.701837] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 3.701867] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
[ 3.702019] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0149000
[ 3.776905] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 3.776911] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.776915] usb usb4: Product: OHCI PCI host controller
[ 3.776918] usb usb4: Manufacturer: Linux 4.19.0-rc4-00081-geba2d6b34a32 ohci_hcd
[ 3.776920] usb usb4: SerialNumber: 0000:00:13.0
[ 3.789688] hub 4-0:1.0: USB hub found
[ 3.793567] hub 4-0:1.0: 5 ports detected
[ 3.798036] probe of 4-0:1.0 returned 1 after 8367 usecs
[ 3.798111] probe of usb4 returned 1 after 8586 usecs
[ 3.798246] probe of 0000:00:13.0 returned 1 after 97197 usecs
[ 3.807216] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 3.807238] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5
[ 3.807365] ohci-pci 0000:00:14.5: irq 18, io mem 0xf014a000
[ 3.862946] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 3.862959] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.862963] usb usb5: Product: OHCI PCI host controller
[ 3.862966] usb usb5: Manufacturer: Linux 4.19.0-rc4-00081-geba2d6b34a32 ohci_hcd
[ 3.862969] usb usb5: SerialNumber: 0000:00:14.5
[ 3.866537] hub 5-0:1.0: USB hub found
[ 3.866563] hub 5-0:1.0: 2 ports detected
[ 3.866728] probe of 5-0:1.0 returned 1 after 212 usecs
[ 3.866790] probe of usb5 returned 1 after 371 usecs
[ 3.866953] probe of 0000:00:14.5 returned 1 after 68696 usecs
[ 3.867006] initcall ohci_pci_init+0x0/0x1000 [ohci_pci] returned 0 after 173860 usecs
[ 4.117481] usb 3-2: new low-speed USB device number 2 using ohci-pci
[ 4.284618] usb 3-2: New USB device found, idVendor=1241, idProduct=1122, bcdDevice= 1.00
[ 4.284624] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.295228] input: HID 1241:1122 as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:1241:1122.0001/input/input14
[ 4.295799] hid-generic 0003:1241:1122.0001: input,hidraw0: USB HID v1.00 Mouse [HID 1241:1122] on usb-0000:00:12.0-2/input0
[ 4.295823] probe of 0003:1241:1122.0001 returned 1 after 919 usecs
[ 4.295851] probe of 3-2:1.0 returned 1 after 8163 usecs
[ 4.295914] probe of 3-2 returned 1 after 9340 usecs
[ 4.303497] r8169 0000:03:00.0 enp3s0: renamed from eth0
[ 4.362955] r8169 0000:03:00.0: Direct firmware load for rtl_nic/rtl8168e-2.fw failed with error -2
[ 4.362965] r8169 0000:03:00.0 enp3s0: unable to load firmware patch rtl_nic/rtl8168e-2.fw (-2)
[ 4.363482] RTL8211DN Gigabit Ethernet r8169-300:00: attached PHY driver [RTL8211DN Gigabit Ethernet] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
[ 4.483824] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 4.491642] r8169 0000:03:00.0 enp3s0: Link is Down
[ 5.731905] random: crng init done
[ 5.731912] random: 7 urandom warning(s) missed due to ratelimiting
[ 6.970155] r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 6.970178] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: x86/mm: Found insecure W+X mapping at address (ptrval)/0xc00a0000
2018-09-19 6:55 x86/mm: Found insecure W+X mapping at address (ptrval)/0xc00a0000 Paul Menzel
@ 2018-09-19 8:09 ` Thomas Gleixner
2018-09-20 7:07 ` Paul Menzel
0 siblings, 1 reply; 23+ messages in thread
From: Thomas Gleixner @ 2018-09-19 8:09 UTC (permalink / raw)
To: Paul Menzel; +Cc: linux-mm, x86
Paul,
On Wed, 19 Sep 2018, Paul Menzel wrote:
>
> With Linux 4.19-rc4+ and `CONFIG_DEBUG_WX=y`, I see the message below on
> the ASRock E350M1.
>
> > [ 1.813378] Freeing unused kernel image memory: 1112K
> > [ 1.818662] Write protecting the kernel text: 8708k
> > [ 1.818987] Write protecting the kernel read-only data: 2864k
> > [ 1.818989] NX-protecting the kernel data: 5628k
> > [ 1.819265] ------------[ cut here ]------------
> > [ 1.819272] x86/mm: Found insecure W+X mapping at address
> > (ptrval)/0xc00a0000
>
> I do not notice any problems with the system, but maybe something can be done
> to get rid of these.
Can you please enable CONFIG_X86_PTDUMP and provide the output of the files
in /sys/kernel/debug/page_tables/ ?
Thanks,
tglx
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: x86/mm: Found insecure W+X mapping at address (ptrval)/0xc00a0000
2018-09-19 8:09 ` Thomas Gleixner
@ 2018-09-20 7:07 ` Paul Menzel
2018-09-20 22:51 ` Thomas Gleixner
0 siblings, 1 reply; 23+ messages in thread
From: Paul Menzel @ 2018-09-20 7:07 UTC (permalink / raw)
To: Thomas Gleixner; +Cc: linux-mm, x86
[-- Attachment #1: Type: text/plain, Size: 1168 bytes --]
Dear Thomas,
As always, thank you for the quick response.
Am 19.09.2018 um 10:09 schrieb Thomas Gleixner:
> On Wed, 19 Sep 2018, Paul Menzel wrote:
>>
>> With Linux 4.19-rc4+ and `CONFIG_DEBUG_WX=y`, I see the message below on
>> the ASRock E350M1.
>>
>>> [ 1.813378] Freeing unused kernel image memory: 1112K
>>> [ 1.818662] Write protecting the kernel text: 8708k
>>> [ 1.818987] Write protecting the kernel read-only data: 2864k
>>> [ 1.818989] NX-protecting the kernel data: 5628k
>>> [ 1.819265] ------------[ cut here ]------------
>>> [ 1.819272] x86/mm: Found insecure W+X mapping at address
>>> (ptrval)/0xc00a0000
>>
>> I do not notice any problems with the system, but maybe something can be done
>> to get rid of these.
>
> Can you please enable CONFIG_X86_PTDUMP and provide the output of the files
> in /sys/kernel/debug/page_tables/ ?
By accident, I noticed that this issue does not happen with GRUB as
coreboot payload, and only with SeaBIOS. (I only tested on the ASRock
E350M1.) A coreboot developer said, that SeaBIOS does not do mapping though.
Please find attached the files from SeaBIOS and GRUB.
Kind regards,
Paul
[-- Attachment #2: kernel --]
[-- Type: text/plain, Size: 22807 bytes --]
---[ User Space ]---
0x00000000-0xc0000000 3G pgd
---[ Kernel Mapping ]---
0xc0000000-0xc009b000 620K RW GLB NX pte
0xc009b000-0xc009c000 4K ro GLB NX pte
0xc009c000-0xc009d000 4K ro GLB x pte
0xc009d000-0xc00a0000 12K RW GLB NX pte
0xc00a0000-0xc0100000 384K RW GLB x pte
0xc0100000-0xc0200000 1M RW GLB NX pte
0xc0200000-0xd2000000 286M RW PSE GLB NX pmd
0xd2000000-0xd2800000 8M ro PSE GLB x pmd
0xd2800000-0xd2881000 516K ro GLB x pte
0xd2881000-0xd2b4d000 2864K ro GLB NX pte
0xd2b4d000-0xd2e00000 2764K RW GLB NX pte
0xd2e00000-0xf7400000 582M RW PSE GLB NX pmd
0xf7400000-0xf75fe000 2040K RW GLB NX pte
0xf75fe000-0xf7600000 8K pte
0xf7600000-0xf7c00000 6M pmd
0xf7c00000-0xf7dfe000 2040K pte
---[ vmalloc() Area ]---
0xf7dfe000-0xf7dff000 4K RW GLB NX pte
0xf7dff000-0xf7e00000 4K pte
0xf7e00000-0xf7e03000 12K RW GLB NX pte
0xf7e03000-0xf7e04000 4K pte
0xf7e04000-0xf7e07000 12K RW GLB NX pte
0xf7e07000-0xf7e08000 4K pte
0xf7e08000-0xf7e09000 4K RW PCD GLB NX pte
0xf7e09000-0xf7e0a000 4K pte
0xf7e0a000-0xf7e0b000 4K ro GLB NX pte
0xf7e0b000-0xf7e0c000 4K pte
0xf7e0c000-0xf7e0d000 4K RW PCD GLB NX pte
0xf7e0d000-0xf7e0e000 4K pte
0xf7e0e000-0xf7e0f000 4K ro GLB NX pte
0xf7e0f000-0xf7e10000 4K pte
0xf7e10000-0xf7e1f000 60K RW GLB NX pte
0xf7e1f000-0xf7e20000 4K pte
0xf7e20000-0xf7e21000 4K RW PCD GLB NX pte
0xf7e21000-0xf7e22000 4K pte
0xf7e22000-0xf7e23000 4K RW GLB NX pte
0xf7e23000-0xf7e24000 4K pte
0xf7e24000-0xf7e25000 4K ro GLB NX pte
0xf7e25000-0xf7e26000 4K pte
0xf7e26000-0xf7e27000 4K ro GLB NX pte
0xf7e27000-0xf7e28000 4K pte
0xf7e28000-0xf7e29000 4K ro GLB NX pte
0xf7e29000-0xf7e2a000 4K pte
0xf7e2a000-0xf7e2b000 4K ro GLB NX pte
0xf7e2b000-0xf7e2c000 4K pte
0xf7e2c000-0xf7e2d000 4K ro GLB NX pte
0xf7e2d000-0xf7e2e000 4K pte
0xf7e2e000-0xf7e3e000 64K RW GLB NX pte
0xf7e3e000-0xf7e3f000 4K pte
0xf7e3f000-0xf7e43000 16K RW GLB NX pte
0xf7e43000-0xf7e44000 4K pte
0xf7e44000-0xf7e45000 4K RW PWT GLB NX pte
0xf7e45000-0xf7e46000 4K pte
0xf7e46000-0xf7e47000 4K ro GLB NX pte
0xf7e47000-0xf7e48000 4K pte
0xf7e48000-0xf7e49000 4K ro GLB NX pte
0xf7e49000-0xf7e4b000 8K pte
0xf7e4b000-0xf7e5b000 64K RW GLB NX pte
0xf7e5b000-0xf7e5c000 4K pte
0xf7e5c000-0xf7e6c000 64K RW GLB NX pte
0xf7e6c000-0xf7e6d000 4K pte
0xf7e6d000-0xf7e6e000 4K RW PCD GLB NX pte
0xf7e6e000-0xf7e6f000 4K pte
0xf7e6f000-0xf7e70000 4K ro GLB NX pte
0xf7e70000-0xf7e71000 4K pte
0xf7e71000-0xf7e72000 4K RW PCD GLB NX pte
0xf7e72000-0xf7e73000 4K pte
0xf7e73000-0xf7e74000 4K RW PCD GLB NX pte
0xf7e74000-0xf7e75000 4K pte
0xf7e75000-0xf7e76000 4K ro GLB NX pte
0xf7e76000-0xf7e77000 4K pte
0xf7e77000-0xf7e78000 4K ro GLB NX pte
0xf7e78000-0xf7e79000 4K pte
0xf7e79000-0xf7e7a000 4K ro GLB NX pte
0xf7e7a000-0xf7e7b000 4K pte
0xf7e7b000-0xf7e7c000 4K ro GLB NX pte
0xf7e7c000-0xf7e7d000 4K pte
0xf7e7d000-0xf7e7e000 4K ro GLB NX pte
0xf7e7e000-0xf7e80000 8K pte
0xf7e80000-0xf7ec0000 256K RW PCD GLB NX pte
0xf7ec0000-0xf7ec1000 4K pte
0xf7ec1000-0xf7fc1000 1M RW GLB NX pte
0xf7fc1000-0xf7fc2000 4K pte
0xf7fc2000-0xf7fc3000 4K ro GLB NX pte
0xf7fc3000-0xf7fc4000 4K pte
0xf7fc4000-0xf7fc5000 4K ro GLB NX pte
0xf7fc5000-0xf7fc6000 4K pte
0xf7fc6000-0xf7fc7000 4K ro GLB NX pte
0xf7fc7000-0xf7fc8000 4K pte
0xf7fc8000-0xf7fc9000 4K ro GLB NX pte
0xf7fc9000-0xf7fca000 4K pte
0xf7fca000-0xf7fcb000 4K ro GLB NX pte
0xf7fcb000-0xf7fcc000 4K pte
0xf7fcc000-0xf7fcd000 4K ro GLB NX pte
0xf7fcd000-0xf7fce000 4K pte
0xf7fce000-0xf7fcf000 4K ro GLB NX pte
0xf7fcf000-0xf7fd0000 4K pte
0xf7fd0000-0xf7fd1000 4K ro GLB NX pte
0xf7fd1000-0xf7fd2000 4K pte
0xf7fd2000-0xf7fd3000 4K ro GLB NX pte
0xf7fd3000-0xf7fd4000 4K pte
0xf7fd4000-0xf7fd5000 4K ro GLB NX pte
0xf7fd5000-0xf7fd6000 4K pte
0xf7fd6000-0xf7fd7000 4K ro GLB NX pte
0xf7fd7000-0xf7fd8000 4K pte
0xf7fd8000-0xf7fd9000 4K ro GLB NX pte
0xf7fd9000-0xf7fda000 4K pte
0xf7fda000-0xf7fdb000 4K ro GLB NX pte
0xf7fdb000-0xf7fdc000 4K pte
0xf7fdc000-0xf7fdd000 4K ro GLB NX pte
0xf7fdd000-0xf7fde000 4K pte
0xf7fde000-0xf7fdf000 4K ro GLB NX pte
0xf7fdf000-0xf7fe0000 4K pte
0xf7fe0000-0xf7fe1000 4K ro GLB NX pte
0xf7fe1000-0xf7fe2000 4K pte
0xf7fe2000-0xf7fe3000 4K ro GLB NX pte
0xf7fe3000-0xf7fe4000 4K pte
0xf7fe4000-0xf7fe5000 4K ro GLB NX pte
0xf7fe5000-0xf7fe6000 4K pte
0xf7fe6000-0xf7fe7000 4K ro GLB NX pte
0xf7fe7000-0xf7fe8000 4K pte
0xf7fe8000-0xf7fe9000 4K ro GLB NX pte
0xf7fe9000-0xf7fea000 4K pte
0xf7fea000-0xf7feb000 4K ro GLB NX pte
0xf7feb000-0xf7fec000 4K pte
0xf7fec000-0xf7fed000 4K ro GLB NX pte
0xf7fed000-0xf7fee000 4K pte
0xf7fee000-0xf7fef000 4K ro GLB NX pte
0xf7fef000-0xf7ff0000 4K pte
0xf7ff0000-0xf7ff1000 4K ro GLB NX pte
0xf7ff1000-0xf7ff2000 4K pte
0xf7ff2000-0xf7ff3000 4K ro GLB NX pte
0xf7ff3000-0xf7ff4000 4K pte
0xf7ff4000-0xf7ff5000 4K ro GLB NX pte
0xf7ff5000-0xf7ff6000 4K pte
0xf7ff6000-0xf7ff7000 4K ro GLB NX pte
0xf7ff7000-0xf7ff8000 4K pte
0xf7ff8000-0xf7ffb000 12K RW GLB NX pte
0xf7ffb000-0xf7ffc000 4K pte
0xf7ffc000-0xf7ffd000 4K ro GLB NX pte
0xf7ffd000-0xf7ffe000 4K pte
0xf7ffe000-0xf7fff000 4K ro GLB NX pte
0xf7fff000-0xf8000000 4K pte
0xf8000000-0xf8122000 1160K RW PWT GLB NX pte
0xf8122000-0xf8123000 4K pte
0xf8123000-0xf8323000 2M RW GLB NX pte
0xf8323000-0xf8324000 4K pte
0xf8324000-0xf8325000 4K ro GLB NX pte
0xf8325000-0xf8326000 4K pte
0xf8326000-0xf8327000 4K ro GLB NX pte
0xf8327000-0xf8328000 4K pte
0xf8328000-0xf8329000 4K ro GLB NX pte
0xf8329000-0xf832a000 4K pte
0xf832a000-0xf832b000 4K ro GLB NX pte
0xf832b000-0xf832c000 4K pte
0xf832c000-0xf832d000 4K ro GLB NX pte
0xf832d000-0xf832e000 4K pte
0xf832e000-0xf832f000 4K ro GLB NX pte
0xf832f000-0xf8330000 4K pte
0xf8330000-0xf8333000 12K RW GLB NX pte
0xf8333000-0xf8334000 4K pte
0xf8334000-0xf8335000 4K ro GLB NX pte
0xf8335000-0xf8336000 4K pte
0xf8336000-0xf8337000 4K ro GLB NX pte
0xf8337000-0xf833a000 12K pte
0xf833a000-0xf833b000 4K ro GLB x pte
0xf833b000-0xf833c000 4K ro GLB NX pte
0xf833c000-0xf833e000 8K RW GLB NX pte
0xf833e000-0xf833f000 4K pte
0xf833f000-0xf8340000 4K RW PCD GLB NX pte
0xf8340000-0xf8342000 8K pte
0xf8342000-0xf8344000 8K ro GLB x pte
0xf8344000-0xf8345000 4K ro GLB NX pte
0xf8345000-0xf8347000 8K RW GLB NX pte
0xf8347000-0xf8348000 4K pte
0xf8348000-0xf8349000 4K RW GLB NX pte
0xf8349000-0xf834a000 4K pte
0xf834a000-0xf834b000 4K ro GLB NX pte
0xf834b000-0xf834c000 4K pte
0xf834c000-0xf834d000 4K ro GLB x pte
0xf834d000-0xf834e000 4K ro GLB NX pte
0xf834e000-0xf8350000 8K RW GLB NX pte
0xf8350000-0xf8351000 4K pte
0xf8351000-0xf8352000 4K ro GLB x pte
0xf8352000-0xf8353000 4K ro GLB NX pte
0xf8353000-0xf8355000 8K RW GLB NX pte
0xf8355000-0xf8356000 4K pte
0xf8356000-0xf8357000 4K ro GLB x pte
0xf8357000-0xf8358000 4K ro GLB NX pte
0xf8358000-0xf835a000 8K RW GLB NX pte
0xf835a000-0xf835b000 4K pte
0xf835b000-0xf835e000 12K RW GLB NX pte
0xf835e000-0xf835f000 4K pte
0xf835f000-0xf8366000 28K ro GLB x pte
0xf8366000-0xf8368000 8K ro GLB NX pte
0xf8368000-0xf836a000 8K RW GLB NX pte
0xf836a000-0xf836b000 4K pte
0xf836b000-0xf836e000 12K RW GLB NX pte
0xf836e000-0xf8370000 8K pte
0xf8370000-0xf8371000 4K ro GLB x pte
0xf8371000-0xf8372000 4K ro GLB NX pte
0xf8372000-0xf8374000 8K RW GLB NX pte
0xf8374000-0xf8377000 12K pte
0xf8377000-0xf837a000 12K RW GLB NX pte
0xf837a000-0xf837e000 16K pte
0xf837e000-0xf8382000 16K ro GLB x pte
0xf8382000-0xf8383000 4K ro GLB NX pte
0xf8383000-0xf8385000 8K RW GLB NX pte
0xf8385000-0xf8386000 4K pte
0xf8386000-0xf8387000 4K RW PCD GLB NX pte
0xf8387000-0xf8388000 4K pte
0xf8388000-0xf8389000 4K RW PCD GLB NX pte
0xf8389000-0xf838a000 4K pte
0xf838a000-0xf8392000 32K ro GLB x pte
0xf8392000-0xf8394000 8K ro GLB NX pte
0xf8394000-0xf8397000 12K RW GLB NX pte
0xf8397000-0xf8398000 4K pte
0xf8398000-0xf83a3000 44K ro GLB x pte
0xf83a3000-0xf83a5000 8K ro GLB NX pte
0xf83a5000-0xf83a7000 8K RW GLB NX pte
0xf83a7000-0xf83a8000 4K pte
0xf83a8000-0xf83ac000 16K RW PCD GLB NX pte
0xf83ac000-0xf83ad000 4K pte
0xf83ad000-0xf83b0000 12K RW GLB NX pte
0xf83b0000-0xf83b1000 4K pte
0xf83b1000-0xf83b4000 12K RW GLB NX pte
0xf83b4000-0xf83b6000 8K pte
0xf83b6000-0xf83b7000 4K RW PCD GLB NX pte
0xf83b7000-0xf83b8000 4K pte
0xf83b8000-0xf83bc000 16K RW PCD GLB NX pte
0xf83bc000-0xf83bd000 4K pte
0xf83bd000-0xf83be000 4K RW PCD GLB NX pte
0xf83be000-0xf83bf000 4K pte
0xf83bf000-0xf83c2000 12K ro GLB x pte
0xf83c2000-0xf83c4000 8K ro GLB NX pte
0xf83c4000-0xf83c6000 8K RW GLB NX pte
0xf83c6000-0xf83c7000 4K pte
0xf83c7000-0xf83c8000 4K ro GLB NX pte
0xf83c8000-0xf83ca000 8K pte
0xf83ca000-0xf83cd000 12K RW GLB NX pte
0xf83cd000-0xf83ce000 4K pte
0xf83ce000-0xf83cf000 4K ro GLB NX pte
0xf83cf000-0xf83d1000 8K pte
0xf83d1000-0xf83d3000 8K ro GLB x pte
0xf83d3000-0xf83d5000 8K ro GLB NX pte
0xf83d5000-0xf83d7000 8K RW GLB NX pte
0xf83d7000-0xf83d8000 4K pte
0xf83d8000-0xf83db000 12K RW GLB NX pte
0xf83db000-0xf83dc000 4K pte
0xf83dc000-0xf83dd000 4K ro GLB x pte
0xf83dd000-0xf83de000 4K ro GLB NX pte
0xf83de000-0xf83e0000 8K RW GLB NX pte
0xf83e0000-0xf83e2000 8K pte
0xf83e2000-0xf83e3000 4K ro GLB x pte
0xf83e3000-0xf83e4000 4K ro GLB NX pte
0xf83e4000-0xf83e6000 8K RW GLB NX pte
0xf83e6000-0xf83ed000 28K pte
0xf83ed000-0xf83ee000 4K ro GLB x pte
0xf83ee000-0xf83ef000 4K ro GLB NX pte
0xf83ef000-0xf83f1000 8K RW GLB NX pte
0xf83f1000-0xf83f4000 12K pte
0xf83f4000-0xf83fa000 24K ro GLB x pte
0xf83fa000-0xf83fc000 8K ro GLB NX pte
0xf83fc000-0xf83fe000 8K RW GLB NX pte
0xf83fe000-0xf8400000 8K pte
0xf8400000-0xf8600000 2M RW PWT GLB NX pte
0xf8600000-0xf8601000 4K pte
0xf8601000-0xf8701000 1M RW GLB NX pte
0xf8701000-0xf8702000 4K pte
0xf8702000-0xf8802000 1M RW GLB NX pte
0xf8802000-0xf8803000 4K pte
0xf8803000-0xf8810000 52K ro GLB x pte
0xf8810000-0xf8814000 16K ro GLB NX pte
0xf8814000-0xf8818000 16K RW GLB NX pte
0xf8818000-0xf881b000 12K pte
0xf881b000-0xf8827000 48K ro GLB x pte
0xf8827000-0xf8829000 8K ro GLB NX pte
0xf8829000-0xf882d000 16K RW GLB NX pte
0xf882d000-0xf882e000 4K pte
0xf882e000-0xf883a000 48K ro GLB x pte
0xf883a000-0xf883d000 12K ro GLB NX pte
0xf883d000-0xf8840000 12K RW GLB NX pte
0xf8840000-0xf884a000 40K pte
0xf884a000-0xf8851000 28K ro GLB x pte
0xf8851000-0xf8859000 32K ro GLB NX pte
0xf8859000-0xf885d000 16K RW GLB NX pte
0xf885d000-0xf8862000 20K pte
0xf8862000-0xf8869000 28K ro GLB x pte
0xf8869000-0xf886b000 8K ro GLB NX pte
0xf886b000-0xf886f000 16K RW GLB NX pte
0xf886f000-0xf8870000 4K pte
0xf8870000-0xf887b000 44K ro GLB x pte
0xf887b000-0xf887d000 8K ro GLB NX pte
0xf887d000-0xf8880000 12K RW GLB NX pte
0xf8880000-0xf8a00000 1536K pte
0xf8a00000-0xf8f00000 5M RW PWT GLB NX pte
0xf8f00000-0xf8f01000 4K pte
0xf8f01000-0xf9301000 4M RW GLB NX pte
0xf9301000-0xf9302000 4K pte
0xf9302000-0xf9702000 4M RW GLB NX pte
0xf9702000-0xf9703000 4K pte
0xf9703000-0xf9b03000 4M RW GLB NX pte
0xf9b03000-0xf9b04000 4K pte
0xf9b04000-0xf9f04000 4M RW GLB NX pte
0xf9f04000-0xf9f05000 4K pte
0xf9f05000-0xfa305000 4M RW GLB NX pte
0xfa305000-0xfa400000 1004K pte
0xfa400000-0xff400000 80M pmd
0xff400000-0xff5c4000 1808K pte
0xff5c4000-0xff5d0000 48K RW GLB NX pte
0xff5d0000-0xff5e1000 68K pte
0xff5e1000-0xff5ed000 48K RW GLB NX pte
0xff5ed000-0xff5fe000 68K pte
---[ vmalloc() End ]---
0xff5fe000-0xff600000 8K pte
---[ Persistent kmap() Area ]---
0xff600000-0xff601000 4K pte
0xff601000-0xff603000 8K RW GLB NX pte
0xff603000-0xff6e7000 912K pte
0xff6e7000-0xff6ff000 96K RW GLB NX pte
0xff6ff000-0xff800000 1028K pte
0xff800000-0xffa00000 2M pmd
---[ CPU entry area ]---
0xffa00000-0xffa01000 4K ro GLB NX pte
0xffa01000-0xffa06000 20K RW GLB NX pte
0xffa06000-0xffa28000 136K pte
0xffa28000-0xffa2d000 20K RW GLB NX pte
0xffa2d000-0xfff8f000 5512K pte
---[ Fixmap area ]---
0xfff8f000-0xffffa000 428K pte
0xffffa000-0xffffc000 8K RW PWT PCD GLB NX pte
0xffffc000-0x00000000 16K pte
[-- Attachment #3: current_kernel --]
[-- Type: text/plain, Size: 30052 bytes --]
---[ User Space ]---
0x00000000-0x00400000 4M pmd
0x00400000-0x00456000 344K pte
0x00456000-0x00458000 8K USR ro NX pte
0x00458000-0x00470000 96K USR ro x pte
0x00470000-0x0047b000 44K USR ro NX pte
0x0047b000-0x0047c000 4K USR ro NX pte
0x0047c000-0x0047d000 4K USR RW NX pte
0x0047d000-0x00600000 1548K pte
0x00600000-0x02000000 26M pmd
0x02000000-0x0204e000 312K pte
0x0204e000-0x02050000 8K USR RW NX pte
0x02050000-0x02057000 28K pte
0x02057000-0x02058000 4K USR RW NX pte
0x02058000-0x02078000 128K pte
0x02078000-0x02079000 4K USR RW NX pte
0x02079000-0x02200000 1564K pte
0x02200000-0xb7a00000 2904M pmd
0xb7a00000-0xb7aff000 1020K pte
0xb7aff000-0xb7b0f000 64K USR ro NX pte
0xb7b0f000-0xb7b10000 4K pte
0xb7b10000-0xb7b17000 28K USR ro NX pte
0xb7b17000-0xb7b18000 4K pte
0xb7b18000-0xb7b2a000 72K USR ro NX pte
0xb7b2a000-0xb7b2b000 4K pte
0xb7b2b000-0xb7b30000 20K USR ro NX pte
0xb7b30000-0xb7b40000 64K pte
0xb7b40000-0xb7b50000 64K USR ro NX pte
0xb7b50000-0xb7b60000 64K pte
0xb7b60000-0xb7b70000 64K USR ro NX pte
0xb7b70000-0xb7c60000 960K pte
0xb7c60000-0xb7c69000 36K USR ro NX pte
0xb7c69000-0xb7c6a000 4K pte
0xb7c6a000-0xb7c70000 24K USR ro NX pte
0xb7c70000-0xb7c90000 128K pte
0xb7c90000-0xb7c9a000 40K USR ro NX pte
0xb7c9a000-0xb7c9b000 4K USR RW NX pte
0xb7c9b000-0xb7c9c000 4K pte
0xb7c9c000-0xb7ca1000 20K USR ro NX pte
0xb7ca1000-0xb7cb1000 64K USR ro x pte
0xb7cb1000-0xb7cb8000 28K USR ro NX pte
0xb7cb8000-0xb7cb9000 4K USR ro NX pte
0xb7cb9000-0xb7cba000 4K USR RW NX pte
0xb7cba000-0xb7cbb000 4K pte
0xb7cbb000-0xb7cbc000 4K USR RW NX pte
0xb7cbc000-0xb7cbd000 4K USR ro NX pte
0xb7cbd000-0xb7cbf000 8K USR ro x pte
0xb7cbf000-0xb7cc0000 4K pte
0xb7cc0000-0xb7cc1000 4K USR ro NX pte
0xb7cc1000-0xb7cc2000 4K USR RW NX pte
0xb7cc2000-0xb7cc3000 4K USR ro NX pte
0xb7cc3000-0xb7cc6000 12K USR ro x pte
0xb7cc6000-0xb7cc7000 4K pte
0xb7cc7000-0xb7cd3000 48K USR ro x pte
0xb7cd3000-0xb7d39000 408K pte
0xb7d39000-0xb7d3a000 4K USR ro NX pte
0xb7d3a000-0xb7d3b000 4K USR RW NX pte
0xb7d3b000-0xb7d54000 100K USR ro NX pte
0xb7d54000-0xb7d70000 112K USR ro x pte
0xb7d70000-0xb7da0000 192K pte
0xb7da0000-0xb7ddc000 240K USR ro x pte
0xb7ddc000-0xb7ddd000 4K pte
0xb7ddd000-0xb7de0000 12K USR ro x pte
0xb7de0000-0xb7df0000 64K pte
0xb7df0000-0xb7e00000 64K USR ro x pte
0xb7e00000-0xb7e10000 64K pte
0xb7e10000-0xb7e49000 228K USR ro x pte
0xb7e49000-0xb7e4a000 4K pte
0xb7e4a000-0xb7e50000 24K USR ro x pte
0xb7e50000-0xb7e60000 64K pte
0xb7e60000-0xb7e78000 96K USR ro x pte
0xb7e78000-0xb7e79000 4K pte
0xb7e79000-0xb7e80000 28K USR ro x pte
0xb7e80000-0xb7ea0000 128K pte
0xb7ea0000-0xb7ec7000 156K USR ro NX pte
0xb7ec7000-0xb7ec8000 4K pte
0xb7ec8000-0xb7ed0000 32K USR ro NX pte
0xb7ed0000-0xb7f0f000 252K pte
0xb7f0f000-0xb7f11000 8K USR ro NX pte
0xb7f11000-0xb7f15000 16K USR RW NX pte
0xb7f15000-0xb7f19000 16K USR ro x pte
0xb7f19000-0xb7f1a000 4K USR ro NX pte
0xb7f1a000-0xb7f1b000 4K USR RW NX pte
0xb7f1b000-0xb7f23000 32K USR ro x pte
0xb7f23000-0xb7f24000 4K USR ro NX pte
0xb7f24000-0xb7f25000 4K USR RW NX pte
0xb7f25000-0xb7f35000 64K USR ro x pte
0xb7f35000-0xb7f40000 44K pte
0xb7f40000-0xb7f4f000 60K USR ro x pte
0xb7f4f000-0xb7f50000 4K USR ro NX pte
0xb7f50000-0xb7f51000 4K USR RW NX pte
0xb7f51000-0xb7f64000 76K pte
0xb7f64000-0xb7f66000 8K USR RW NX pte
0xb7f66000-0xb7f69000 12K pte
0xb7f69000-0xb7f6a000 4K USR ro x pte
0xb7f6a000-0xb7f6b000 4K USR ro NX pte
0xb7f6b000-0xb7f86000 108K USR ro x pte
0xb7f86000-0xb7f90000 40K USR ro NX pte
0xb7f90000-0xb7f91000 4K pte
0xb7f91000-0xb7f92000 4K USR ro NX pte
0xb7f92000-0xb7f93000 4K USR RW NX pte
0xb7f93000-0xb8000000 436K pte
0xb8000000-0xbf800000 120M pmd
0xbf800000-0xbf977000 1500K pte
0xbf977000-0xbf97a000 12K USR RW NX pte
0xbf97a000-0xbfa00000 536K pte
0xbfa00000-0xc0000000 6M pmd
---[ Kernel Mapping ]---
0xc0000000-0xc009b000 620K RW GLB NX pte
0xc009b000-0xc009c000 4K ro GLB NX pte
0xc009c000-0xc009d000 4K ro GLB x pte
0xc009d000-0xc00a0000 12K RW GLB NX pte
0xc00a0000-0xc0100000 384K RW GLB x pte
0xc0100000-0xc0200000 1M RW GLB NX pte
0xc0200000-0xd2000000 286M RW PSE GLB NX pmd
0xd2000000-0xd2800000 8M ro PSE GLB x pmd
0xd2800000-0xd2881000 516K ro GLB x pte
0xd2881000-0xd2b4d000 2864K ro GLB NX pte
0xd2b4d000-0xd2e00000 2764K RW GLB NX pte
0xd2e00000-0xf7400000 582M RW PSE GLB NX pmd
0xf7400000-0xf75fe000 2040K RW GLB NX pte
0xf75fe000-0xf7600000 8K pte
0xf7600000-0xf7c00000 6M pmd
0xf7c00000-0xf7dfe000 2040K pte
---[ vmalloc() Area ]---
0xf7dfe000-0xf7dff000 4K RW GLB NX pte
0xf7dff000-0xf7e00000 4K pte
0xf7e00000-0xf7e03000 12K RW GLB NX pte
0xf7e03000-0xf7e04000 4K pte
0xf7e04000-0xf7e07000 12K RW GLB NX pte
0xf7e07000-0xf7e08000 4K pte
0xf7e08000-0xf7e09000 4K RW PCD GLB NX pte
0xf7e09000-0xf7e0a000 4K pte
0xf7e0a000-0xf7e0b000 4K ro GLB NX pte
0xf7e0b000-0xf7e0c000 4K pte
0xf7e0c000-0xf7e0d000 4K RW PCD GLB NX pte
0xf7e0d000-0xf7e0e000 4K pte
0xf7e0e000-0xf7e0f000 4K ro GLB NX pte
0xf7e0f000-0xf7e10000 4K pte
0xf7e10000-0xf7e1f000 60K RW GLB NX pte
0xf7e1f000-0xf7e20000 4K pte
0xf7e20000-0xf7e21000 4K RW PCD GLB NX pte
0xf7e21000-0xf7e22000 4K pte
0xf7e22000-0xf7e23000 4K RW GLB NX pte
0xf7e23000-0xf7e24000 4K pte
0xf7e24000-0xf7e25000 4K ro GLB NX pte
0xf7e25000-0xf7e26000 4K pte
0xf7e26000-0xf7e27000 4K ro GLB NX pte
0xf7e27000-0xf7e28000 4K pte
0xf7e28000-0xf7e29000 4K ro GLB NX pte
0xf7e29000-0xf7e2a000 4K pte
0xf7e2a000-0xf7e2b000 4K ro GLB NX pte
0xf7e2b000-0xf7e2c000 4K pte
0xf7e2c000-0xf7e2d000 4K ro GLB NX pte
0xf7e2d000-0xf7e2e000 4K pte
0xf7e2e000-0xf7e3e000 64K RW GLB NX pte
0xf7e3e000-0xf7e3f000 4K pte
0xf7e3f000-0xf7e43000 16K RW GLB NX pte
0xf7e43000-0xf7e44000 4K pte
0xf7e44000-0xf7e45000 4K RW PWT GLB NX pte
0xf7e45000-0xf7e46000 4K pte
0xf7e46000-0xf7e47000 4K ro GLB NX pte
0xf7e47000-0xf7e48000 4K pte
0xf7e48000-0xf7e49000 4K ro GLB NX pte
0xf7e49000-0xf7e4b000 8K pte
0xf7e4b000-0xf7e5b000 64K RW GLB NX pte
0xf7e5b000-0xf7e5c000 4K pte
0xf7e5c000-0xf7e6c000 64K RW GLB NX pte
0xf7e6c000-0xf7e6d000 4K pte
0xf7e6d000-0xf7e6e000 4K RW PCD GLB NX pte
0xf7e6e000-0xf7e6f000 4K pte
0xf7e6f000-0xf7e70000 4K ro GLB NX pte
0xf7e70000-0xf7e71000 4K pte
0xf7e71000-0xf7e72000 4K RW PCD GLB NX pte
0xf7e72000-0xf7e73000 4K pte
0xf7e73000-0xf7e74000 4K RW PCD GLB NX pte
0xf7e74000-0xf7e75000 4K pte
0xf7e75000-0xf7e76000 4K ro GLB NX pte
0xf7e76000-0xf7e77000 4K pte
0xf7e77000-0xf7e78000 4K ro GLB NX pte
0xf7e78000-0xf7e79000 4K pte
0xf7e79000-0xf7e7a000 4K ro GLB NX pte
0xf7e7a000-0xf7e7b000 4K pte
0xf7e7b000-0xf7e7c000 4K ro GLB NX pte
0xf7e7c000-0xf7e7d000 4K pte
0xf7e7d000-0xf7e7e000 4K ro GLB NX pte
0xf7e7e000-0xf7e80000 8K pte
0xf7e80000-0xf7ec0000 256K RW PCD GLB NX pte
0xf7ec0000-0xf7ec1000 4K pte
0xf7ec1000-0xf7fc1000 1M RW GLB NX pte
0xf7fc1000-0xf7fc2000 4K pte
0xf7fc2000-0xf7fc3000 4K ro GLB NX pte
0xf7fc3000-0xf7fc4000 4K pte
0xf7fc4000-0xf7fc5000 4K ro GLB NX pte
0xf7fc5000-0xf7fc6000 4K pte
0xf7fc6000-0xf7fc7000 4K ro GLB NX pte
0xf7fc7000-0xf7fc8000 4K pte
0xf7fc8000-0xf7fc9000 4K ro GLB NX pte
0xf7fc9000-0xf7fca000 4K pte
0xf7fca000-0xf7fcb000 4K ro GLB NX pte
0xf7fcb000-0xf7fcc000 4K pte
0xf7fcc000-0xf7fcd000 4K ro GLB NX pte
0xf7fcd000-0xf7fce000 4K pte
0xf7fce000-0xf7fcf000 4K ro GLB NX pte
0xf7fcf000-0xf7fd0000 4K pte
0xf7fd0000-0xf7fd1000 4K ro GLB NX pte
0xf7fd1000-0xf7fd2000 4K pte
0xf7fd2000-0xf7fd3000 4K ro GLB NX pte
0xf7fd3000-0xf7fd4000 4K pte
0xf7fd4000-0xf7fd5000 4K ro GLB NX pte
0xf7fd5000-0xf7fd6000 4K pte
0xf7fd6000-0xf7fd7000 4K ro GLB NX pte
0xf7fd7000-0xf7fd8000 4K pte
0xf7fd8000-0xf7fd9000 4K ro GLB NX pte
0xf7fd9000-0xf7fda000 4K pte
0xf7fda000-0xf7fdb000 4K ro GLB NX pte
0xf7fdb000-0xf7fdc000 4K pte
0xf7fdc000-0xf7fdd000 4K ro GLB NX pte
0xf7fdd000-0xf7fde000 4K pte
0xf7fde000-0xf7fdf000 4K ro GLB NX pte
0xf7fdf000-0xf7fe0000 4K pte
0xf7fe0000-0xf7fe1000 4K ro GLB NX pte
0xf7fe1000-0xf7fe2000 4K pte
0xf7fe2000-0xf7fe3000 4K ro GLB NX pte
0xf7fe3000-0xf7fe4000 4K pte
0xf7fe4000-0xf7fe5000 4K ro GLB NX pte
0xf7fe5000-0xf7fe6000 4K pte
0xf7fe6000-0xf7fe7000 4K ro GLB NX pte
0xf7fe7000-0xf7fe8000 4K pte
0xf7fe8000-0xf7fe9000 4K ro GLB NX pte
0xf7fe9000-0xf7fea000 4K pte
0xf7fea000-0xf7feb000 4K ro GLB NX pte
0xf7feb000-0xf7fec000 4K pte
0xf7fec000-0xf7fed000 4K ro GLB NX pte
0xf7fed000-0xf7fee000 4K pte
0xf7fee000-0xf7fef000 4K ro GLB NX pte
0xf7fef000-0xf7ff0000 4K pte
0xf7ff0000-0xf7ff1000 4K ro GLB NX pte
0xf7ff1000-0xf7ff2000 4K pte
0xf7ff2000-0xf7ff3000 4K ro GLB NX pte
0xf7ff3000-0xf7ff4000 4K pte
0xf7ff4000-0xf7ff5000 4K ro GLB NX pte
0xf7ff5000-0xf7ff6000 4K pte
0xf7ff6000-0xf7ff7000 4K ro GLB NX pte
0xf7ff7000-0xf7ff8000 4K pte
0xf7ff8000-0xf7ffb000 12K RW GLB NX pte
0xf7ffb000-0xf7ffc000 4K pte
0xf7ffc000-0xf7ffd000 4K ro GLB NX pte
0xf7ffd000-0xf7ffe000 4K pte
0xf7ffe000-0xf7fff000 4K ro GLB NX pte
0xf7fff000-0xf8000000 4K pte
0xf8000000-0xf8122000 1160K RW PWT GLB NX pte
0xf8122000-0xf8123000 4K pte
0xf8123000-0xf8323000 2M RW GLB NX pte
0xf8323000-0xf8324000 4K pte
0xf8324000-0xf8325000 4K ro GLB NX pte
0xf8325000-0xf8326000 4K pte
0xf8326000-0xf8327000 4K ro GLB NX pte
0xf8327000-0xf8328000 4K pte
0xf8328000-0xf8329000 4K ro GLB NX pte
0xf8329000-0xf832a000 4K pte
0xf832a000-0xf832b000 4K ro GLB NX pte
0xf832b000-0xf832c000 4K pte
0xf832c000-0xf832d000 4K ro GLB NX pte
0xf832d000-0xf832e000 4K pte
0xf832e000-0xf832f000 4K ro GLB NX pte
0xf832f000-0xf8330000 4K pte
0xf8330000-0xf8333000 12K RW GLB NX pte
0xf8333000-0xf8334000 4K pte
0xf8334000-0xf8335000 4K ro GLB NX pte
0xf8335000-0xf8336000 4K pte
0xf8336000-0xf8337000 4K ro GLB NX pte
0xf8337000-0xf833a000 12K pte
0xf833a000-0xf833b000 4K ro GLB x pte
0xf833b000-0xf833c000 4K ro GLB NX pte
0xf833c000-0xf833e000 8K RW GLB NX pte
0xf833e000-0xf833f000 4K pte
0xf833f000-0xf8340000 4K RW PCD GLB NX pte
0xf8340000-0xf8342000 8K pte
0xf8342000-0xf8344000 8K ro GLB x pte
0xf8344000-0xf8345000 4K ro GLB NX pte
0xf8345000-0xf8347000 8K RW GLB NX pte
0xf8347000-0xf8348000 4K pte
0xf8348000-0xf8349000 4K RW GLB NX pte
0xf8349000-0xf834a000 4K pte
0xf834a000-0xf834b000 4K ro GLB NX pte
0xf834b000-0xf834c000 4K pte
0xf834c000-0xf834d000 4K ro GLB x pte
0xf834d000-0xf834e000 4K ro GLB NX pte
0xf834e000-0xf8350000 8K RW GLB NX pte
0xf8350000-0xf8351000 4K pte
0xf8351000-0xf8352000 4K ro GLB x pte
0xf8352000-0xf8353000 4K ro GLB NX pte
0xf8353000-0xf8355000 8K RW GLB NX pte
0xf8355000-0xf8356000 4K pte
0xf8356000-0xf8357000 4K ro GLB x pte
0xf8357000-0xf8358000 4K ro GLB NX pte
0xf8358000-0xf835a000 8K RW GLB NX pte
0xf835a000-0xf835b000 4K pte
0xf835b000-0xf835e000 12K RW GLB NX pte
0xf835e000-0xf835f000 4K pte
0xf835f000-0xf8366000 28K ro GLB x pte
0xf8366000-0xf8368000 8K ro GLB NX pte
0xf8368000-0xf836a000 8K RW GLB NX pte
0xf836a000-0xf836b000 4K pte
0xf836b000-0xf836e000 12K RW GLB NX pte
0xf836e000-0xf8370000 8K pte
0xf8370000-0xf8371000 4K ro GLB x pte
0xf8371000-0xf8372000 4K ro GLB NX pte
0xf8372000-0xf8374000 8K RW GLB NX pte
0xf8374000-0xf8377000 12K pte
0xf8377000-0xf837a000 12K RW GLB NX pte
0xf837a000-0xf837e000 16K pte
0xf837e000-0xf8382000 16K ro GLB x pte
0xf8382000-0xf8383000 4K ro GLB NX pte
0xf8383000-0xf8385000 8K RW GLB NX pte
0xf8385000-0xf8386000 4K pte
0xf8386000-0xf8387000 4K RW PCD GLB NX pte
0xf8387000-0xf8388000 4K pte
0xf8388000-0xf8389000 4K RW PCD GLB NX pte
0xf8389000-0xf838a000 4K pte
0xf838a000-0xf8392000 32K ro GLB x pte
0xf8392000-0xf8394000 8K ro GLB NX pte
0xf8394000-0xf8397000 12K RW GLB NX pte
0xf8397000-0xf8398000 4K pte
0xf8398000-0xf83a3000 44K ro GLB x pte
0xf83a3000-0xf83a5000 8K ro GLB NX pte
0xf83a5000-0xf83a7000 8K RW GLB NX pte
0xf83a7000-0xf83a8000 4K pte
0xf83a8000-0xf83ac000 16K RW PCD GLB NX pte
0xf83ac000-0xf83ad000 4K pte
0xf83ad000-0xf83b0000 12K RW GLB NX pte
0xf83b0000-0xf83b1000 4K pte
0xf83b1000-0xf83b4000 12K RW GLB NX pte
0xf83b4000-0xf83b6000 8K pte
0xf83b6000-0xf83b7000 4K RW PCD GLB NX pte
0xf83b7000-0xf83b8000 4K pte
0xf83b8000-0xf83bc000 16K RW PCD GLB NX pte
0xf83bc000-0xf83bd000 4K pte
0xf83bd000-0xf83be000 4K RW PCD GLB NX pte
0xf83be000-0xf83bf000 4K pte
0xf83bf000-0xf83c2000 12K ro GLB x pte
0xf83c2000-0xf83c4000 8K ro GLB NX pte
0xf83c4000-0xf83c6000 8K RW GLB NX pte
0xf83c6000-0xf83c7000 4K pte
0xf83c7000-0xf83c8000 4K ro GLB NX pte
0xf83c8000-0xf83ca000 8K pte
0xf83ca000-0xf83cd000 12K RW GLB NX pte
0xf83cd000-0xf83ce000 4K pte
0xf83ce000-0xf83cf000 4K ro GLB NX pte
0xf83cf000-0xf83d1000 8K pte
0xf83d1000-0xf83d3000 8K ro GLB x pte
0xf83d3000-0xf83d5000 8K ro GLB NX pte
0xf83d5000-0xf83d7000 8K RW GLB NX pte
0xf83d7000-0xf83d8000 4K pte
0xf83d8000-0xf83db000 12K RW GLB NX pte
0xf83db000-0xf83dc000 4K pte
0xf83dc000-0xf83dd000 4K ro GLB x pte
0xf83dd000-0xf83de000 4K ro GLB NX pte
0xf83de000-0xf83e0000 8K RW GLB NX pte
0xf83e0000-0xf83e2000 8K pte
0xf83e2000-0xf83e3000 4K ro GLB x pte
0xf83e3000-0xf83e4000 4K ro GLB NX pte
0xf83e4000-0xf83e6000 8K RW GLB NX pte
0xf83e6000-0xf83ed000 28K pte
0xf83ed000-0xf83ee000 4K ro GLB x pte
0xf83ee000-0xf83ef000 4K ro GLB NX pte
0xf83ef000-0xf83f1000 8K RW GLB NX pte
0xf83f1000-0xf83f4000 12K pte
0xf83f4000-0xf83fa000 24K ro GLB x pte
0xf83fa000-0xf83fc000 8K ro GLB NX pte
0xf83fc000-0xf83fe000 8K RW GLB NX pte
0xf83fe000-0xf8400000 8K pte
0xf8400000-0xf8600000 2M RW PWT GLB NX pte
0xf8600000-0xf8601000 4K pte
0xf8601000-0xf8701000 1M RW GLB NX pte
0xf8701000-0xf8702000 4K pte
0xf8702000-0xf8802000 1M RW GLB NX pte
0xf8802000-0xf8803000 4K pte
0xf8803000-0xf8810000 52K ro GLB x pte
0xf8810000-0xf8814000 16K ro GLB NX pte
0xf8814000-0xf8818000 16K RW GLB NX pte
0xf8818000-0xf881b000 12K pte
0xf881b000-0xf8827000 48K ro GLB x pte
0xf8827000-0xf8829000 8K ro GLB NX pte
0xf8829000-0xf882d000 16K RW GLB NX pte
0xf882d000-0xf882e000 4K pte
0xf882e000-0xf883a000 48K ro GLB x pte
0xf883a000-0xf883d000 12K ro GLB NX pte
0xf883d000-0xf8840000 12K RW GLB NX pte
0xf8840000-0xf884a000 40K pte
0xf884a000-0xf8851000 28K ro GLB x pte
0xf8851000-0xf8859000 32K ro GLB NX pte
0xf8859000-0xf885d000 16K RW GLB NX pte
0xf885d000-0xf8862000 20K pte
0xf8862000-0xf8869000 28K ro GLB x pte
0xf8869000-0xf886b000 8K ro GLB NX pte
0xf886b000-0xf886f000 16K RW GLB NX pte
0xf886f000-0xf8870000 4K pte
0xf8870000-0xf887b000 44K ro GLB x pte
0xf887b000-0xf887d000 8K ro GLB NX pte
0xf887d000-0xf8880000 12K RW GLB NX pte
0xf8880000-0xf8a00000 1536K pte
0xf8a00000-0xf8f00000 5M RW PWT GLB NX pte
0xf8f00000-0xf8f01000 4K pte
0xf8f01000-0xf9301000 4M RW GLB NX pte
0xf9301000-0xf9302000 4K pte
0xf9302000-0xf9702000 4M RW GLB NX pte
0xf9702000-0xf9703000 4K pte
0xf9703000-0xf9b03000 4M RW GLB NX pte
0xf9b03000-0xf9b04000 4K pte
0xf9b04000-0xf9f04000 4M RW GLB NX pte
0xf9f04000-0xf9f05000 4K pte
0xf9f05000-0xfa305000 4M RW GLB NX pte
0xfa305000-0xfa400000 1004K pte
0xfa400000-0xff400000 80M pmd
0xff400000-0xff5c4000 1808K pte
0xff5c4000-0xff5d0000 48K RW GLB NX pte
0xff5d0000-0xff5e1000 68K pte
0xff5e1000-0xff5ed000 48K RW GLB NX pte
0xff5ed000-0xff5fe000 68K pte
---[ vmalloc() End ]---
0xff5fe000-0xff600000 8K pte
---[ Persistent kmap() Area ]---
0xff600000-0xff601000 4K pte
0xff601000-0xff603000 8K RW GLB NX pte
0xff603000-0xff6e7000 912K pte
0xff6e7000-0xff6ff000 96K RW GLB NX pte
0xff6ff000-0xff800000 1028K pte
0xff800000-0xffa00000 2M pmd
---[ CPU entry area ]---
0xffa00000-0xffa01000 4K ro GLB NX pte
0xffa01000-0xffa06000 20K RW GLB NX pte
0xffa06000-0xffa28000 136K pte
0xffa28000-0xffa2d000 20K RW GLB NX pte
0xffa2d000-0xfff8f000 5512K pte
---[ Fixmap area ]---
0xfff8f000-0xffffa000 428K pte
0xffffa000-0xffffc000 8K RW PWT PCD GLB NX pte
0xffffc000-0x00000000 16K pte
[-- Attachment #4: current_user --]
[-- Type: text/plain, Size: 30052 bytes --]
---[ User Space ]---
0x00000000-0x00400000 4M pmd
0x00400000-0x00456000 344K pte
0x00456000-0x00458000 8K USR ro NX pte
0x00458000-0x00470000 96K USR ro x pte
0x00470000-0x0047b000 44K USR ro NX pte
0x0047b000-0x0047c000 4K USR ro NX pte
0x0047c000-0x0047d000 4K USR RW NX pte
0x0047d000-0x00600000 1548K pte
0x00600000-0x02000000 26M pmd
0x02000000-0x0204e000 312K pte
0x0204e000-0x02050000 8K USR RW NX pte
0x02050000-0x02057000 28K pte
0x02057000-0x02060000 36K USR RW NX pte
0x02060000-0x02078000 96K pte
0x02078000-0x02079000 4K USR RW NX pte
0x02079000-0x02200000 1564K pte
0x02200000-0xb7a00000 2904M pmd
0xb7a00000-0xb7aff000 1020K pte
0xb7aff000-0xb7b0f000 64K USR ro NX pte
0xb7b0f000-0xb7b10000 4K pte
0xb7b10000-0xb7b17000 28K USR ro NX pte
0xb7b17000-0xb7b18000 4K pte
0xb7b18000-0xb7b2a000 72K USR ro NX pte
0xb7b2a000-0xb7b2b000 4K pte
0xb7b2b000-0xb7b30000 20K USR ro NX pte
0xb7b30000-0xb7b40000 64K pte
0xb7b40000-0xb7b50000 64K USR ro NX pte
0xb7b50000-0xb7b60000 64K pte
0xb7b60000-0xb7b70000 64K USR ro NX pte
0xb7b70000-0xb7c60000 960K pte
0xb7c60000-0xb7c69000 36K USR ro NX pte
0xb7c69000-0xb7c6a000 4K pte
0xb7c6a000-0xb7c70000 24K USR ro NX pte
0xb7c70000-0xb7c90000 128K pte
0xb7c90000-0xb7c9a000 40K USR ro NX pte
0xb7c9a000-0xb7c9b000 4K USR RW NX pte
0xb7c9b000-0xb7c9c000 4K pte
0xb7c9c000-0xb7ca1000 20K USR ro NX pte
0xb7ca1000-0xb7cb1000 64K USR ro x pte
0xb7cb1000-0xb7cb8000 28K USR ro NX pte
0xb7cb8000-0xb7cb9000 4K USR ro NX pte
0xb7cb9000-0xb7cba000 4K USR RW NX pte
0xb7cba000-0xb7cbb000 4K pte
0xb7cbb000-0xb7cbc000 4K USR RW NX pte
0xb7cbc000-0xb7cbd000 4K USR ro NX pte
0xb7cbd000-0xb7cbf000 8K USR ro x pte
0xb7cbf000-0xb7cc0000 4K pte
0xb7cc0000-0xb7cc1000 4K USR ro NX pte
0xb7cc1000-0xb7cc2000 4K USR RW NX pte
0xb7cc2000-0xb7cc3000 4K USR ro NX pte
0xb7cc3000-0xb7cc6000 12K USR ro x pte
0xb7cc6000-0xb7cc7000 4K pte
0xb7cc7000-0xb7cd3000 48K USR ro x pte
0xb7cd3000-0xb7d39000 408K pte
0xb7d39000-0xb7d3a000 4K USR ro NX pte
0xb7d3a000-0xb7d3b000 4K USR RW NX pte
0xb7d3b000-0xb7d54000 100K USR ro NX pte
0xb7d54000-0xb7d70000 112K USR ro x pte
0xb7d70000-0xb7da0000 192K pte
0xb7da0000-0xb7ddc000 240K USR ro x pte
0xb7ddc000-0xb7ddd000 4K pte
0xb7ddd000-0xb7de0000 12K USR ro x pte
0xb7de0000-0xb7df0000 64K pte
0xb7df0000-0xb7e00000 64K USR ro x pte
0xb7e00000-0xb7e10000 64K pte
0xb7e10000-0xb7e49000 228K USR ro x pte
0xb7e49000-0xb7e4a000 4K pte
0xb7e4a000-0xb7e50000 24K USR ro x pte
0xb7e50000-0xb7e60000 64K pte
0xb7e60000-0xb7e78000 96K USR ro x pte
0xb7e78000-0xb7e79000 4K pte
0xb7e79000-0xb7e80000 28K USR ro x pte
0xb7e80000-0xb7ea0000 128K pte
0xb7ea0000-0xb7ec7000 156K USR ro NX pte
0xb7ec7000-0xb7ec8000 4K pte
0xb7ec8000-0xb7ed0000 32K USR ro NX pte
0xb7ed0000-0xb7f0f000 252K pte
0xb7f0f000-0xb7f11000 8K USR ro NX pte
0xb7f11000-0xb7f15000 16K USR RW NX pte
0xb7f15000-0xb7f19000 16K USR ro x pte
0xb7f19000-0xb7f1a000 4K USR ro NX pte
0xb7f1a000-0xb7f1b000 4K USR RW NX pte
0xb7f1b000-0xb7f23000 32K USR ro x pte
0xb7f23000-0xb7f24000 4K USR ro NX pte
0xb7f24000-0xb7f25000 4K USR RW NX pte
0xb7f25000-0xb7f35000 64K USR ro x pte
0xb7f35000-0xb7f40000 44K pte
0xb7f40000-0xb7f4f000 60K USR ro x pte
0xb7f4f000-0xb7f50000 4K USR ro NX pte
0xb7f50000-0xb7f51000 4K USR RW NX pte
0xb7f51000-0xb7f64000 76K pte
0xb7f64000-0xb7f66000 8K USR RW NX pte
0xb7f66000-0xb7f69000 12K pte
0xb7f69000-0xb7f6a000 4K USR ro x pte
0xb7f6a000-0xb7f6b000 4K USR ro NX pte
0xb7f6b000-0xb7f86000 108K USR ro x pte
0xb7f86000-0xb7f90000 40K USR ro NX pte
0xb7f90000-0xb7f91000 4K pte
0xb7f91000-0xb7f92000 4K USR ro NX pte
0xb7f92000-0xb7f93000 4K USR RW NX pte
0xb7f93000-0xb8000000 436K pte
0xb8000000-0xbf800000 120M pmd
0xbf800000-0xbf977000 1500K pte
0xbf977000-0xbf97a000 12K USR RW NX pte
0xbf97a000-0xbfa00000 536K pte
0xbfa00000-0xc0000000 6M pmd
---[ Kernel Mapping ]---
0xc0000000-0xc009b000 620K RW GLB NX pte
0xc009b000-0xc009c000 4K ro GLB NX pte
0xc009c000-0xc009d000 4K ro GLB x pte
0xc009d000-0xc00a0000 12K RW GLB NX pte
0xc00a0000-0xc0100000 384K RW GLB x pte
0xc0100000-0xc0200000 1M RW GLB NX pte
0xc0200000-0xd2000000 286M RW PSE GLB NX pmd
0xd2000000-0xd2800000 8M ro PSE GLB x pmd
0xd2800000-0xd2881000 516K ro GLB x pte
0xd2881000-0xd2b4d000 2864K ro GLB NX pte
0xd2b4d000-0xd2e00000 2764K RW GLB NX pte
0xd2e00000-0xf7400000 582M RW PSE GLB NX pmd
0xf7400000-0xf75fe000 2040K RW GLB NX pte
0xf75fe000-0xf7600000 8K pte
0xf7600000-0xf7c00000 6M pmd
0xf7c00000-0xf7dfe000 2040K pte
---[ vmalloc() Area ]---
0xf7dfe000-0xf7dff000 4K RW GLB NX pte
0xf7dff000-0xf7e00000 4K pte
0xf7e00000-0xf7e03000 12K RW GLB NX pte
0xf7e03000-0xf7e04000 4K pte
0xf7e04000-0xf7e07000 12K RW GLB NX pte
0xf7e07000-0xf7e08000 4K pte
0xf7e08000-0xf7e09000 4K RW PCD GLB NX pte
0xf7e09000-0xf7e0a000 4K pte
0xf7e0a000-0xf7e0b000 4K ro GLB NX pte
0xf7e0b000-0xf7e0c000 4K pte
0xf7e0c000-0xf7e0d000 4K RW PCD GLB NX pte
0xf7e0d000-0xf7e0e000 4K pte
0xf7e0e000-0xf7e0f000 4K ro GLB NX pte
0xf7e0f000-0xf7e10000 4K pte
0xf7e10000-0xf7e1f000 60K RW GLB NX pte
0xf7e1f000-0xf7e20000 4K pte
0xf7e20000-0xf7e21000 4K RW PCD GLB NX pte
0xf7e21000-0xf7e22000 4K pte
0xf7e22000-0xf7e23000 4K RW GLB NX pte
0xf7e23000-0xf7e24000 4K pte
0xf7e24000-0xf7e25000 4K ro GLB NX pte
0xf7e25000-0xf7e26000 4K pte
0xf7e26000-0xf7e27000 4K ro GLB NX pte
0xf7e27000-0xf7e28000 4K pte
0xf7e28000-0xf7e29000 4K ro GLB NX pte
0xf7e29000-0xf7e2a000 4K pte
0xf7e2a000-0xf7e2b000 4K ro GLB NX pte
0xf7e2b000-0xf7e2c000 4K pte
0xf7e2c000-0xf7e2d000 4K ro GLB NX pte
0xf7e2d000-0xf7e2e000 4K pte
0xf7e2e000-0xf7e3e000 64K RW GLB NX pte
0xf7e3e000-0xf7e3f000 4K pte
0xf7e3f000-0xf7e43000 16K RW GLB NX pte
0xf7e43000-0xf7e44000 4K pte
0xf7e44000-0xf7e45000 4K RW PWT GLB NX pte
0xf7e45000-0xf7e46000 4K pte
0xf7e46000-0xf7e47000 4K ro GLB NX pte
0xf7e47000-0xf7e48000 4K pte
0xf7e48000-0xf7e49000 4K ro GLB NX pte
0xf7e49000-0xf7e4b000 8K pte
0xf7e4b000-0xf7e5b000 64K RW GLB NX pte
0xf7e5b000-0xf7e5c000 4K pte
0xf7e5c000-0xf7e6c000 64K RW GLB NX pte
0xf7e6c000-0xf7e6d000 4K pte
0xf7e6d000-0xf7e6e000 4K RW PCD GLB NX pte
0xf7e6e000-0xf7e6f000 4K pte
0xf7e6f000-0xf7e70000 4K ro GLB NX pte
0xf7e70000-0xf7e71000 4K pte
0xf7e71000-0xf7e72000 4K RW PCD GLB NX pte
0xf7e72000-0xf7e73000 4K pte
0xf7e73000-0xf7e74000 4K RW PCD GLB NX pte
0xf7e74000-0xf7e75000 4K pte
0xf7e75000-0xf7e76000 4K ro GLB NX pte
0xf7e76000-0xf7e77000 4K pte
0xf7e77000-0xf7e78000 4K ro GLB NX pte
0xf7e78000-0xf7e79000 4K pte
0xf7e79000-0xf7e7a000 4K ro GLB NX pte
0xf7e7a000-0xf7e7b000 4K pte
0xf7e7b000-0xf7e7c000 4K ro GLB NX pte
0xf7e7c000-0xf7e7d000 4K pte
0xf7e7d000-0xf7e7e000 4K ro GLB NX pte
0xf7e7e000-0xf7e80000 8K pte
0xf7e80000-0xf7ec0000 256K RW PCD GLB NX pte
0xf7ec0000-0xf7ec1000 4K pte
0xf7ec1000-0xf7fc1000 1M RW GLB NX pte
0xf7fc1000-0xf7fc2000 4K pte
0xf7fc2000-0xf7fc3000 4K ro GLB NX pte
0xf7fc3000-0xf7fc4000 4K pte
0xf7fc4000-0xf7fc5000 4K ro GLB NX pte
0xf7fc5000-0xf7fc6000 4K pte
0xf7fc6000-0xf7fc7000 4K ro GLB NX pte
0xf7fc7000-0xf7fc8000 4K pte
0xf7fc8000-0xf7fc9000 4K ro GLB NX pte
0xf7fc9000-0xf7fca000 4K pte
0xf7fca000-0xf7fcb000 4K ro GLB NX pte
0xf7fcb000-0xf7fcc000 4K pte
0xf7fcc000-0xf7fcd000 4K ro GLB NX pte
0xf7fcd000-0xf7fce000 4K pte
0xf7fce000-0xf7fcf000 4K ro GLB NX pte
0xf7fcf000-0xf7fd0000 4K pte
0xf7fd0000-0xf7fd1000 4K ro GLB NX pte
0xf7fd1000-0xf7fd2000 4K pte
0xf7fd2000-0xf7fd3000 4K ro GLB NX pte
0xf7fd3000-0xf7fd4000 4K pte
0xf7fd4000-0xf7fd5000 4K ro GLB NX pte
0xf7fd5000-0xf7fd6000 4K pte
0xf7fd6000-0xf7fd7000 4K ro GLB NX pte
0xf7fd7000-0xf7fd8000 4K pte
0xf7fd8000-0xf7fd9000 4K ro GLB NX pte
0xf7fd9000-0xf7fda000 4K pte
0xf7fda000-0xf7fdb000 4K ro GLB NX pte
0xf7fdb000-0xf7fdc000 4K pte
0xf7fdc000-0xf7fdd000 4K ro GLB NX pte
0xf7fdd000-0xf7fde000 4K pte
0xf7fde000-0xf7fdf000 4K ro GLB NX pte
0xf7fdf000-0xf7fe0000 4K pte
0xf7fe0000-0xf7fe1000 4K ro GLB NX pte
0xf7fe1000-0xf7fe2000 4K pte
0xf7fe2000-0xf7fe3000 4K ro GLB NX pte
0xf7fe3000-0xf7fe4000 4K pte
0xf7fe4000-0xf7fe5000 4K ro GLB NX pte
0xf7fe5000-0xf7fe6000 4K pte
0xf7fe6000-0xf7fe7000 4K ro GLB NX pte
0xf7fe7000-0xf7fe8000 4K pte
0xf7fe8000-0xf7fe9000 4K ro GLB NX pte
0xf7fe9000-0xf7fea000 4K pte
0xf7fea000-0xf7feb000 4K ro GLB NX pte
0xf7feb000-0xf7fec000 4K pte
0xf7fec000-0xf7fed000 4K ro GLB NX pte
0xf7fed000-0xf7fee000 4K pte
0xf7fee000-0xf7fef000 4K ro GLB NX pte
0xf7fef000-0xf7ff0000 4K pte
0xf7ff0000-0xf7ff1000 4K ro GLB NX pte
0xf7ff1000-0xf7ff2000 4K pte
0xf7ff2000-0xf7ff3000 4K ro GLB NX pte
0xf7ff3000-0xf7ff4000 4K pte
0xf7ff4000-0xf7ff5000 4K ro GLB NX pte
0xf7ff5000-0xf7ff6000 4K pte
0xf7ff6000-0xf7ff7000 4K ro GLB NX pte
0xf7ff7000-0xf7ff8000 4K pte
0xf7ff8000-0xf7ffb000 12K RW GLB NX pte
0xf7ffb000-0xf7ffc000 4K pte
0xf7ffc000-0xf7ffd000 4K ro GLB NX pte
0xf7ffd000-0xf7ffe000 4K pte
0xf7ffe000-0xf7fff000 4K ro GLB NX pte
0xf7fff000-0xf8000000 4K pte
0xf8000000-0xf8122000 1160K RW PWT GLB NX pte
0xf8122000-0xf8123000 4K pte
0xf8123000-0xf8323000 2M RW GLB NX pte
0xf8323000-0xf8324000 4K pte
0xf8324000-0xf8325000 4K ro GLB NX pte
0xf8325000-0xf8326000 4K pte
0xf8326000-0xf8327000 4K ro GLB NX pte
0xf8327000-0xf8328000 4K pte
0xf8328000-0xf8329000 4K ro GLB NX pte
0xf8329000-0xf832a000 4K pte
0xf832a000-0xf832b000 4K ro GLB NX pte
0xf832b000-0xf832c000 4K pte
0xf832c000-0xf832d000 4K ro GLB NX pte
0xf832d000-0xf832e000 4K pte
0xf832e000-0xf832f000 4K ro GLB NX pte
0xf832f000-0xf8330000 4K pte
0xf8330000-0xf8333000 12K RW GLB NX pte
0xf8333000-0xf8334000 4K pte
0xf8334000-0xf8335000 4K ro GLB NX pte
0xf8335000-0xf8336000 4K pte
0xf8336000-0xf8337000 4K ro GLB NX pte
0xf8337000-0xf833a000 12K pte
0xf833a000-0xf833b000 4K ro GLB x pte
0xf833b000-0xf833c000 4K ro GLB NX pte
0xf833c000-0xf833e000 8K RW GLB NX pte
0xf833e000-0xf833f000 4K pte
0xf833f000-0xf8340000 4K RW PCD GLB NX pte
0xf8340000-0xf8342000 8K pte
0xf8342000-0xf8344000 8K ro GLB x pte
0xf8344000-0xf8345000 4K ro GLB NX pte
0xf8345000-0xf8347000 8K RW GLB NX pte
0xf8347000-0xf8348000 4K pte
0xf8348000-0xf8349000 4K RW GLB NX pte
0xf8349000-0xf834a000 4K pte
0xf834a000-0xf834b000 4K ro GLB NX pte
0xf834b000-0xf834c000 4K pte
0xf834c000-0xf834d000 4K ro GLB x pte
0xf834d000-0xf834e000 4K ro GLB NX pte
0xf834e000-0xf8350000 8K RW GLB NX pte
0xf8350000-0xf8351000 4K pte
0xf8351000-0xf8352000 4K ro GLB x pte
0xf8352000-0xf8353000 4K ro GLB NX pte
0xf8353000-0xf8355000 8K RW GLB NX pte
0xf8355000-0xf8356000 4K pte
0xf8356000-0xf8357000 4K ro GLB x pte
0xf8357000-0xf8358000 4K ro GLB NX pte
0xf8358000-0xf835a000 8K RW GLB NX pte
0xf835a000-0xf835b000 4K pte
0xf835b000-0xf835e000 12K RW GLB NX pte
0xf835e000-0xf835f000 4K pte
0xf835f000-0xf8366000 28K ro GLB x pte
0xf8366000-0xf8368000 8K ro GLB NX pte
0xf8368000-0xf836a000 8K RW GLB NX pte
0xf836a000-0xf836b000 4K pte
0xf836b000-0xf836e000 12K RW GLB NX pte
0xf836e000-0xf8370000 8K pte
0xf8370000-0xf8371000 4K ro GLB x pte
0xf8371000-0xf8372000 4K ro GLB NX pte
0xf8372000-0xf8374000 8K RW GLB NX pte
0xf8374000-0xf8377000 12K pte
0xf8377000-0xf837a000 12K RW GLB NX pte
0xf837a000-0xf837e000 16K pte
0xf837e000-0xf8382000 16K ro GLB x pte
0xf8382000-0xf8383000 4K ro GLB NX pte
0xf8383000-0xf8385000 8K RW GLB NX pte
0xf8385000-0xf8386000 4K pte
0xf8386000-0xf8387000 4K RW PCD GLB NX pte
0xf8387000-0xf8388000 4K pte
0xf8388000-0xf8389000 4K RW PCD GLB NX pte
0xf8389000-0xf838a000 4K pte
0xf838a000-0xf8392000 32K ro GLB x pte
0xf8392000-0xf8394000 8K ro GLB NX pte
0xf8394000-0xf8397000 12K RW GLB NX pte
0xf8397000-0xf8398000 4K pte
0xf8398000-0xf83a3000 44K ro GLB x pte
0xf83a3000-0xf83a5000 8K ro GLB NX pte
0xf83a5000-0xf83a7000 8K RW GLB NX pte
0xf83a7000-0xf83a8000 4K pte
0xf83a8000-0xf83ac000 16K RW PCD GLB NX pte
0xf83ac000-0xf83ad000 4K pte
0xf83ad000-0xf83b0000 12K RW GLB NX pte
0xf83b0000-0xf83b1000 4K pte
0xf83b1000-0xf83b4000 12K RW GLB NX pte
0xf83b4000-0xf83b6000 8K pte
0xf83b6000-0xf83b7000 4K RW PCD GLB NX pte
0xf83b7000-0xf83b8000 4K pte
0xf83b8000-0xf83bc000 16K RW PCD GLB NX pte
0xf83bc000-0xf83bd000 4K pte
0xf83bd000-0xf83be000 4K RW PCD GLB NX pte
0xf83be000-0xf83bf000 4K pte
0xf83bf000-0xf83c2000 12K ro GLB x pte
0xf83c2000-0xf83c4000 8K ro GLB NX pte
0xf83c4000-0xf83c6000 8K RW GLB NX pte
0xf83c6000-0xf83c7000 4K pte
0xf83c7000-0xf83c8000 4K ro GLB NX pte
0xf83c8000-0xf83ca000 8K pte
0xf83ca000-0xf83cd000 12K RW GLB NX pte
0xf83cd000-0xf83ce000 4K pte
0xf83ce000-0xf83cf000 4K ro GLB NX pte
0xf83cf000-0xf83d1000 8K pte
0xf83d1000-0xf83d3000 8K ro GLB x pte
0xf83d3000-0xf83d5000 8K ro GLB NX pte
0xf83d5000-0xf83d7000 8K RW GLB NX pte
0xf83d7000-0xf83d8000 4K pte
0xf83d8000-0xf83db000 12K RW GLB NX pte
0xf83db000-0xf83dc000 4K pte
0xf83dc000-0xf83dd000 4K ro GLB x pte
0xf83dd000-0xf83de000 4K ro GLB NX pte
0xf83de000-0xf83e0000 8K RW GLB NX pte
0xf83e0000-0xf83e2000 8K pte
0xf83e2000-0xf83e3000 4K ro GLB x pte
0xf83e3000-0xf83e4000 4K ro GLB NX pte
0xf83e4000-0xf83e6000 8K RW GLB NX pte
0xf83e6000-0xf83ed000 28K pte
0xf83ed000-0xf83ee000 4K ro GLB x pte
0xf83ee000-0xf83ef000 4K ro GLB NX pte
0xf83ef000-0xf83f1000 8K RW GLB NX pte
0xf83f1000-0xf83f4000 12K pte
0xf83f4000-0xf83fa000 24K ro GLB x pte
0xf83fa000-0xf83fc000 8K ro GLB NX pte
0xf83fc000-0xf83fe000 8K RW GLB NX pte
0xf83fe000-0xf8400000 8K pte
0xf8400000-0xf8600000 2M RW PWT GLB NX pte
0xf8600000-0xf8601000 4K pte
0xf8601000-0xf8701000 1M RW GLB NX pte
0xf8701000-0xf8702000 4K pte
0xf8702000-0xf8802000 1M RW GLB NX pte
0xf8802000-0xf8803000 4K pte
0xf8803000-0xf8810000 52K ro GLB x pte
0xf8810000-0xf8814000 16K ro GLB NX pte
0xf8814000-0xf8818000 16K RW GLB NX pte
0xf8818000-0xf881b000 12K pte
0xf881b000-0xf8827000 48K ro GLB x pte
0xf8827000-0xf8829000 8K ro GLB NX pte
0xf8829000-0xf882d000 16K RW GLB NX pte
0xf882d000-0xf882e000 4K pte
0xf882e000-0xf883a000 48K ro GLB x pte
0xf883a000-0xf883d000 12K ro GLB NX pte
0xf883d000-0xf8840000 12K RW GLB NX pte
0xf8840000-0xf884a000 40K pte
0xf884a000-0xf8851000 28K ro GLB x pte
0xf8851000-0xf8859000 32K ro GLB NX pte
0xf8859000-0xf885d000 16K RW GLB NX pte
0xf885d000-0xf8862000 20K pte
0xf8862000-0xf8869000 28K ro GLB x pte
0xf8869000-0xf886b000 8K ro GLB NX pte
0xf886b000-0xf886f000 16K RW GLB NX pte
0xf886f000-0xf8870000 4K pte
0xf8870000-0xf887b000 44K ro GLB x pte
0xf887b000-0xf887d000 8K ro GLB NX pte
0xf887d000-0xf8880000 12K RW GLB NX pte
0xf8880000-0xf8a00000 1536K pte
0xf8a00000-0xf8f00000 5M RW PWT GLB NX pte
0xf8f00000-0xf8f01000 4K pte
0xf8f01000-0xf9301000 4M RW GLB NX pte
0xf9301000-0xf9302000 4K pte
0xf9302000-0xf9702000 4M RW GLB NX pte
0xf9702000-0xf9703000 4K pte
0xf9703000-0xf9b03000 4M RW GLB NX pte
0xf9b03000-0xf9b04000 4K pte
0xf9b04000-0xf9f04000 4M RW GLB NX pte
0xf9f04000-0xf9f05000 4K pte
0xf9f05000-0xfa305000 4M RW GLB NX pte
0xfa305000-0xfa400000 1004K pte
0xfa400000-0xff400000 80M pmd
0xff400000-0xff5c4000 1808K pte
0xff5c4000-0xff5d0000 48K RW GLB NX pte
0xff5d0000-0xff5e1000 68K pte
0xff5e1000-0xff5ed000 48K RW GLB NX pte
0xff5ed000-0xff5fe000 68K pte
---[ vmalloc() End ]---
0xff5fe000-0xff600000 8K pte
---[ Persistent kmap() Area ]---
0xff600000-0xff601000 4K pte
0xff601000-0xff603000 8K RW GLB NX pte
0xff603000-0xff6e7000 912K pte
0xff6e7000-0xff6ff000 96K RW GLB NX pte
0xff6ff000-0xff800000 1028K pte
0xff800000-0xffa00000 2M pmd
---[ CPU entry area ]---
0xffa00000-0xffa01000 4K ro GLB NX pte
0xffa01000-0xffa06000 20K RW GLB NX pte
0xffa06000-0xffa28000 136K pte
0xffa28000-0xffa2d000 20K RW GLB NX pte
0xffa2d000-0xfff8f000 5512K pte
---[ Fixmap area ]---
0xfff8f000-0xffffa000 428K pte
0xffffa000-0xffffc000 8K RW PWT PCD GLB NX pte
0xffffc000-0x00000000 16K pte
[-- Attachment #5: page_tables_grub.7z --]
[-- Type: application/x-7z-compressed, Size: 2508 bytes --]
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: x86/mm: Found insecure W+X mapping at address (ptrval)/0xc00a0000
2018-09-20 7:07 ` Paul Menzel
@ 2018-09-20 22:51 ` Thomas Gleixner
2018-09-24 21:47 ` Paul Menzel
0 siblings, 1 reply; 23+ messages in thread
From: Thomas Gleixner @ 2018-09-20 22:51 UTC (permalink / raw)
To: Paul Menzel; +Cc: linux-mm, x86
Paul,
On Thu, 20 Sep 2018, Paul Menzel wrote:
> As always, thank you for the quick response.
Thank you for providing the info!
> Am 19.09.2018 um 10:09 schrieb Thomas Gleixner:
> > On Wed, 19 Sep 2018, Paul Menzel wrote:
> > >
> > > With Linux 4.19-rc4+ and `CONFIG_DEBUG_WX=y`, I see the message below on
> > > the ASRock E350M1.
> > >
> > > > [ 1.813378] Freeing unused kernel image memory: 1112K
> > > > [ 1.818662] Write protecting the kernel text: 8708k
> > > > [ 1.818987] Write protecting the kernel read-only data: 2864k
> > > > [ 1.818989] NX-protecting the kernel data: 5628k
> > > > [ 1.819265] ------------[ cut here ]------------
> > > > [ 1.819272] x86/mm: Found insecure W+X mapping at address
> > > > (ptrval)/0xc00a0000
> > >
> > > I do not notice any problems with the system, but maybe something can be
> > > done
> > > to get rid of these.
> >
> > Can you please enable CONFIG_X86_PTDUMP and provide the output of the files
> > in /sys/kernel/debug/page_tables/ ?
>
> By accident, I noticed that this issue does not happen with GRUB as coreboot
> payload, and only with SeaBIOS. (I only tested on the ASRock E350M1.) A
> coreboot developer said, that SeaBIOS does not do mapping though.
Interesting, but I can't spot what causes that.
Can you please apply the patch below, and provide full dmesg of a seabios
and a grub boot along with the page table files for each?
Thanks,
tglx
8<------------------
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index faca978ebf9d..2190d40d99a5 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -794,6 +794,7 @@ void free_kernel_image_pages(void *begin, void *end)
unsigned long len_pages = (end_ul - begin_ul) >> PAGE_SHIFT;
+ pr_info("Freeing init [mem %#010lx-%#010lx]\n", begin_ul, end_ul - 1);
free_init_pages("unused kernel image", begin_ul, end_ul);
/*
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index 979e0a02cbe1..651447261798 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -915,6 +915,7 @@ static void mark_nxdata_nx(void)
*/
unsigned long size = (((unsigned long)__init_end + HPAGE_SIZE) & HPAGE_MASK) - start;
+ pr_info("NX data: 0x%08lx - 0x%08lx\n", start, start + size - 1);
if (__supported_pte_mask & _PAGE_NX)
printk(KERN_INFO "NX-protecting the kernel data: %luk\n", size >> 10);
set_pages_nx(virt_to_page(start), size >> PAGE_SHIFT);
@@ -925,6 +926,7 @@ void mark_rodata_ro(void)
unsigned long start = PFN_ALIGN(_text);
unsigned long size = PFN_ALIGN(_etext) - start;
+ pr_info("RO text: 0x%08lx - 0x%08lx\n", start, start + size - 1);
set_pages_ro(virt_to_page(start), size >> PAGE_SHIFT);
printk(KERN_INFO "Write protecting the kernel text: %luk\n",
size >> 10);
@@ -942,6 +944,7 @@ void mark_rodata_ro(void)
start += size;
size = (unsigned long)__end_rodata - start;
+ pr_info("RO data: 0x%08lx - 0x%08lx\n", start, start + size - 1);
set_pages_ro(virt_to_page(start), size >> PAGE_SHIFT);
printk(KERN_INFO "Write protecting the kernel read-only data: %luk\n",
size >> 10);
^ permalink raw reply related [flat|nested] 23+ messages in thread
* Re: x86/mm: Found insecure W+X mapping at address (ptrval)/0xc00a0000
2018-09-20 22:51 ` Thomas Gleixner
@ 2018-09-24 21:47 ` Paul Menzel
2018-09-28 14:55 ` Thomas Gleixner
0 siblings, 1 reply; 23+ messages in thread
From: Paul Menzel @ 2018-09-24 21:47 UTC (permalink / raw)
To: Thomas Gleixner; +Cc: linux-mm, x86
[-- Attachment #1: Type: text/plain, Size: 1479 bytes --]
Dear Thomas,
Am 21.09.2018 um 00:51 schrieb Thomas Gleixner:
> On Thu, 20 Sep 2018, Paul Menzel wrote:
>> Am 19.09.2018 um 10:09 schrieb Thomas Gleixner:
>>> On Wed, 19 Sep 2018, Paul Menzel wrote:
>>>>
>>>> With Linux 4.19-rc4+ and `CONFIG_DEBUG_WX=y`, I see the message below on
>>>> the ASRock E350M1.
>>>>
>>>>> [ 1.813378] Freeing unused kernel image memory: 1112K
>>>>> [ 1.818662] Write protecting the kernel text: 8708k
>>>>> [ 1.818987] Write protecting the kernel read-only data: 2864k
>>>>> [ 1.818989] NX-protecting the kernel data: 5628k
>>>>> [ 1.819265] ------------[ cut here ]------------
>>>>> [ 1.819272] x86/mm: Found insecure W+X mapping at address
>>>>> (ptrval)/0xc00a0000
>>>>
>>>> I do not notice any problems with the system, but maybe something can be
>>>> done
>>>> to get rid of these.
>>>
>>> Can you please enable CONFIG_X86_PTDUMP and provide the output of the files
>>> in /sys/kernel/debug/page_tables/ ?
>>
>> By accident, I noticed that this issue does not happen with GRUB as coreboot
>> payload, and only with SeaBIOS. (I only tested on the ASRock E350M1.) A
>> coreboot developer said, that SeaBIOS does not do mapping though.
>
> Interesting, but I can't spot what causes that.
>
> Can you please apply the patch below, and provide full dmesg of a seabios
> and a grub boot along with the page table files for each?
I applied the patch on top of 4.19-rc5. Please find all the files attached.
Kind regards,
Paul
[-- Attachment #2: seabios-nx-issue.7z --]
[-- Type: application/x-7z-compressed, Size: 2524 bytes --]
[-- Attachment #3: 20180924–linux_4.19-rc5–seabios-nx-issue.txt --]
[-- Type: text/plain, Size: 119969 bytes --]
[ 0.000000] Linux version 4.19.0-rc5-00001-g59d53fa4dfcf (root@4ed78d5cbcf5) (gcc version 8.1.0 (Debian 8.1.0-11)) #210 SMP Mon Sep 24 06:22:17 UTC 2018
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7d39fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c7d3a000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable
[ 0.000000] kmemleak: Kernel memory leak detector disabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASROCK E350M1/E350M1, BIOS 4.8-1577-ge072247e6e 09/22/2018
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1600.029 MHz processor
[ 0.007195] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.007201] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.007211] last_pfn = 0x11f000 max_arch_pfn = 0x1000000
[ 0.007221] MTRR default type: uncachable
[ 0.007223] MTRR fixed ranges enabled:
[ 0.007226] 00000-9FFFF write-back
[ 0.007228] A0000-BFFFF uncachable
[ 0.007230] C0000-FFFFF write-back
[ 0.007232] MTRR variable ranges enabled:
[ 0.007235] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.007238] 1 base 0C0000000 mask FF8000000 write-back
[ 0.007241] 2 base 080000000 mask FC0000000 write-back
[ 0.007243] 3 base 000000000 mask F80000000 write-back
[ 0.007244] 4 disabled
[ 0.007246] 5 disabled
[ 0.007247] 6 disabled
[ 0.007248] 7 disabled
[ 0.007251] TOM2: 000000011f000000 aka 4592M
[ 0.007440] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.007730] Scanning 1 areas for low memory corruption
[ 0.007737] initial memory mapped: [mem 0x00000000-0x133fffff]
[ 0.007745] Base memory trampoline at [(ptrval)] 9b000 size 16384
[ 0.007870] BRK [0x12e78000, 0x12e78fff] PGTABLE
[ 0.007893] BRK [0x12e79000, 0x12e79fff] PGTABLE
[ 0.007907] ACPI: Early table checksum verification disabled
[ 0.008055] ACPI: RSDP 0x00000000000F4110 000024 (v02 CORE )
[ 0.008062] ACPI: XSDT 0x00000000C7D4D0E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.008076] ACPI: FACP 0x00000000C7D4F840 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
[ 0.008089] ACPI: DSDT 0x00000000C7D4D280 0025B6 (v02 ASROCK COREBOOT 00010001 INTL 20180810)
[ 0.008097] ACPI: FACS 0x00000000C7D4D240 000040
[ 0.008104] ACPI: FACS 0x00000000C7D4D240 000040
[ 0.008110] ACPI: SSDT 0x00000000C7D4F940 00008A (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.008117] ACPI: TCPA 0x00000000C7D4F9D0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.008124] ACPI: APIC 0x00000000C7D4FA10 00005C (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.008131] ACPI: HEST 0x00000000C7D4FA70 000028 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.008139] ACPI: SSDT 0x00000000C7D4FAA0 00168E (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.008147] ACPI: SSDT 0x00000000C7D51130 0003DE (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.008154] ACPI: VFCT 0x00000000C7D51510 00E269 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.008161] ACPI: HPET 0x00000000C7D5F780 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.008181] ACPI: Local APIC address 0xfee00000
[ 0.008189] 3706MB HIGHMEM available.
[ 0.008193] 885MB LOWMEM available.
[ 0.008194] mapped low ram: 0 - 375fe000
[ 0.008196] low ram: 0 - 375fe000
[ 0.008212] BRK [0x12e7a000, 0x12e7afff] PGTABLE
[ 0.019023] Zone ranges:
[ 0.019026] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.019030] Normal [mem 0x0000000001000000-0x00000000375fdfff]
[ 0.019033] HighMem [mem 0x00000000375fe000-0x000000011effffff]
[ 0.019035] Movable zone start for each node
[ 0.019036] Early memory node ranges
[ 0.019038] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.019040] node 0: [mem 0x0000000000100000-0x00000000c7d39fff]
[ 0.019042] node 0: [mem 0x0000000100000000-0x000000011effffff]
[ 0.023058] Reserved but unavailable: 99112 pages
[ 0.023064] Initmem setup node 0 [mem 0x0000000000001000-0x000000011effffff]
[ 0.023068] On node 0 totalpages: 945368
[ 0.023071] DMA zone: 40 pages used for memmap
[ 0.023073] DMA zone: 0 pages reserved
[ 0.023075] DMA zone: 3998 pages, LIFO batch:0
[ 0.023290] Normal zone: 2175 pages used for memmap
[ 0.023292] Normal zone: 222718 pages, LIFO batch:63
[ 0.034830] HighMem zone: 718652 pages, LIFO batch:63
[ 0.078268] Using APIC driver default
[ 0.078546] ACPI: Local APIC address 0xfee00000
[ 0.078570] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.078576] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.078580] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.078583] ACPI: IRQ0 used by override.
[ 0.078585] ACPI: IRQ9 used by override.
[ 0.078590] Using ACPI (MADT) for SMP configuration information
[ 0.078593] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.078605] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.078630] [mem 0xe0000000-0xf7ffffff] available for PCI devices
[ 0.078638] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.078674] random: get_random_bytes called from start_kernel+0x7d/0x44e with crng_init=0
[ 0.078691] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.078925] percpu: Embedded 29 pages/cpu @(ptrval) s89996 r0 d28788 u118784
[ 0.078937] pcpu-alloc: s89996 r0 d28788 u118784 alloc=29*4096
[ 0.078940] pcpu-alloc: [0] 0 [0] 1
[ 0.078972] Built 1 zonelists, mobility grouping on. Total pages: 943153
[ 0.078977] Kernel command line: BOOT_IMAGE=(hd0,msdos1)/boot/vmlinuz-4.19.0-rc5-00001-g59d53fa4dfcf root=/dev/sda1 ro noisapnp cryptomgr.notests quiet initcall_debug init=/lib/systemd/systemd-bootchart memory_corruption_check=1 memory_corruption_check_size=512k memory_corruption_check_period=5 iomem=relaxed apparmor=0 selinux=0 kmemleak=off initcall_blacklist=tracer_init_tracefs,serial8250_init
[ 0.079363] blacklisting initcall tracer_init_tracefs
[ 0.079372] blacklisting initcall serial8250_init
[ 0.079652] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.079837] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.079849] Initializing CPU#0
[ 0.079860] Initializing HighMem for node 0 (000375fe:0011f000)
[ 0.278162] Initializing Movable for node 0 (00000000:00000000)
[ 0.287455] Memory: 3711840K/3781472K available (8705K kernel code, 756K rwdata, 2840K rodata, 1112K init, 644K bss, 69632K reserved, 0K cma-reserved, 2874608K highmem)
[ 0.287465] virtual kernel memory layout:
fixmap : 0xfff8f000 - 0xfffff000 ( 448 kB)
cpu_entry : 0xffa00000 - 0xffa4f000 ( 316 kB)
pkmap : 0xff600000 - 0xff800000 (2048 kB)
vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
.init : 0xd2c1d000 - 0xd2d33000 (1112 kB)
.data : 0xd28807dc - 0xd2c0b100 (3626 kB)
.text : 0xd2000000 - 0xd28807dc (8705 kB)
[ 0.287467] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.287777] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.287782] ftrace: allocating 33660 entries in 66 pages
[ 0.317108] rcu: Hierarchical RCU implementation.
[ 0.317111] rcu: RCU event tracing is enabled.
[ 0.323088] NR_IRQS: 2304, nr_irqs: 440, preallocated irqs: 16
[ 0.323548] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval)
[ 0.323612] spurious 8259A interrupt: IRQ7.
[ 0.323626] calling con_init+0x0/0x1e3 @ 0
[ 0.326020] Console: colour VGA+ 80x25
[ 0.326029] console [tty0] enabled
[ 0.326033] initcall con_init+0x0/0x1e3 returned 0 after 0 usecs
[ 0.326037] calling univ8250_console_init+0x0/0x2a @ 0
[ 0.326047] initcall univ8250_console_init+0x0/0x2a returned 0 after 0 usecs
[ 0.326088] ACPI: Core revision 20180810
[ 0.326634] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.326654] hpet clockevent registered
[ 0.326663] APIC: Switch to symmetric I/O mode setup
[ 0.326666] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.327173] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.331733] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x17104061335, max_idle_ns: 440795261700 ns
[ 0.331751] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.05 BogoMIPS (lpj=1600029)
[ 0.331757] pid_max: default: 32768 minimum: 301
[ 0.331848] Security Framework initialized
[ 0.331851] Yama: becoming mindful.
[ 0.331864] calling selinux_init+0x0/0x1c3 @ 0
[ 0.331867] SELinux: Disabled at boot.
[ 0.331870] initcall selinux_init+0x0/0x1c3 returned 0 after 0 usecs
[ 0.331901] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.331907] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.332341] mce: CPU supports 6 MCE banks
[ 0.332360] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.332362] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[ 0.332369] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.332371] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.332372] Speculative Store Bypass: Vulnerable
[ 0.332607] Freeing SMP alternatives memory: 32K
[ 0.434736] smpboot: CPU0: AMD E-350D APU with Radeon(tm) HD Graphics (family: 0x14, model: 0x2, stepping: 0x0)
[ 0.434736] calling trace_init_flags_sys_enter+0x0/0x13 @ 1
[ 0.434736] initcall trace_init_flags_sys_enter+0x0/0x13 returned 0 after 0 usecs
[ 0.434736] calling trace_init_flags_sys_exit+0x0/0x13 @ 1
[ 0.434736] initcall trace_init_flags_sys_exit+0x0/0x13 returned 0 after 0 usecs
[ 0.434736] calling init_hw_perf_events+0x0/0x5bd @ 1
[ 0.434736] Performance Events: AMD PMU driver.
[ 0.434736] ... version: 0
[ 0.434736] ... bit width: 48
[ 0.434736] ... generic registers: 4
[ 0.434736] ... value mask: 0000ffffffffffff
[ 0.434736] ... max period: 00007fffffffffff
[ 0.434736] ... fixed-purpose events: 0
[ 0.434736] ... event mask: 000000000000000f
[ 0.434736] initcall init_hw_perf_events+0x0/0x5bd returned 0 after 0 usecs
[ 0.434736] calling init_real_mode+0x0/0x108 @ 1
[ 0.434736] initcall init_real_mode+0x0/0x108 returned 0 after 0 usecs
[ 0.434736] calling trace_init_perf_perm_irq_work_exit+0x0/0x16 @ 1
[ 0.434736] initcall trace_init_perf_perm_irq_work_exit+0x0/0x16 returned 0 after 0 usecs
[ 0.434736] calling validate_x2apic+0x0/0x49 @ 1
[ 0.434736] initcall validate_x2apic+0x0/0x49 returned 0 after 0 usecs
[ 0.434736] calling register_nmi_cpu_backtrace_handler+0x0/0x18 @ 1
[ 0.434736] initcall register_nmi_cpu_backtrace_handler+0x0/0x18 returned 0 after 0 usecs
[ 0.434736] calling spawn_ksoftirqd+0x0/0x39 @ 1
[ 0.434736] initcall spawn_ksoftirqd+0x0/0x39 returned 0 after 0 usecs
[ 0.434736] calling migration_init+0x0/0x31 @ 1
[ 0.434736] initcall migration_init+0x0/0x31 returned 0 after 0 usecs
[ 0.434736] calling check_cpu_stall_init+0x0/0x1b @ 1
[ 0.434736] initcall check_cpu_stall_init+0x0/0x1b returned 0 after 0 usecs
[ 0.434736] calling srcu_bootup_announce+0x0/0x30 @ 1
[ 0.434736] rcu: Hierarchical SRCU implementation.
[ 0.434736] initcall srcu_bootup_announce+0x0/0x30 returned 0 after 0 usecs
[ 0.434736] calling rcu_spawn_gp_kthread+0x0/0xfc @ 1
[ 0.434736] initcall rcu_spawn_gp_kthread+0x0/0xfc returned 0 after 0 usecs
[ 0.434736] calling cpu_stop_init+0x0/0x78 @ 1
[ 0.434736] initcall cpu_stop_init+0x0/0x78 returned 0 after 0 usecs
[ 0.434736] calling init_events+0x0/0x3a @ 1
[ 0.434736] initcall init_events+0x0/0x3a returned 0 after 0 usecs
[ 0.434736] calling init_trace_printk+0x0/0xf @ 1
[ 0.434736] initcall init_trace_printk+0x0/0xf returned 0 after 0 usecs
[ 0.434736] calling event_trace_enable_again+0x0/0x21 @ 1
[ 0.434736] initcall event_trace_enable_again+0x0/0x21 returned 0 after 0 usecs
[ 0.434736] calling jump_label_init_module+0x0/0x14 @ 1
[ 0.434736] initcall jump_label_init_module+0x0/0x14 returned 0 after 0 usecs
[ 0.434736] calling dynamic_debug_init+0x0/0x211 @ 1
[ 0.434929] initcall dynamic_debug_init+0x0/0x211 returned 0 after 976 usecs
[ 0.434935] calling rand_initialize+0x0/0x110 @ 1
[ 0.435014] initcall rand_initialize+0x0/0x110 returned 0 after 0 usecs
[ 0.435018] calling initialize_ptr_random+0x0/0x47 @ 1
[ 0.435022] initcall initialize_ptr_random+0x0/0x47 returned 0 after 0 usecs
[ 0.435119] smp: Bringing up secondary CPUs ...
[ 0.435356] CPU 1 irqstacks, hard=(ptrval) soft=(ptrval)
[ 0.435358] x86: Booting SMP configuration:
[ 0.435361] .... node #0, CPUs: #1
[ 0.004167] Initializing CPU#1
[ 0.004167] do_IRQ: 1.55 No irq handler for vector
[ 0.436822] smp: Brought up 1 node, 2 CPUs
[ 0.436822] smpboot: Max logical packages: 1
[ 0.436822] smpboot: Total of 2 processors activated (6400.11 BogoMIPS)
[ 0.437922] devtmpfs: initialized
[ 0.438285] calling ipc_ns_init+0x0/0x48 @ 1
[ 0.438304] initcall ipc_ns_init+0x0/0x48 returned 0 after 0 usecs
[ 0.438308] calling init_mmap_min_addr+0x0/0x27 @ 1
[ 0.438311] initcall init_mmap_min_addr+0x0/0x27 returned 0 after 0 usecs
[ 0.438315] calling net_ns_init+0x0/0xdc @ 1
[ 0.438405] initcall net_ns_init+0x0/0xdc returned 0 after 0 usecs
[ 0.438868] calling e820__register_nvs_regions+0x0/0x3e @ 1
[ 0.438873] initcall e820__register_nvs_regions+0x0/0x3e returned 0 after 0 usecs
[ 0.438878] calling cpufreq_register_tsc_scaling+0x0/0x2a @ 1
[ 0.438882] initcall cpufreq_register_tsc_scaling+0x0/0x2a returned 0 after 0 usecs
[ 0.438887] calling init_cpu_syscore+0x0/0x11 @ 1
[ 0.438891] initcall init_cpu_syscore+0x0/0x11 returned 0 after 0 usecs
[ 0.438895] calling reboot_init+0x0/0x22 @ 1
[ 0.438911] initcall reboot_init+0x0/0x22 returned 0 after 0 usecs
[ 0.438915] calling init_lapic_sysfs+0x0/0x24 @ 1
[ 0.438918] initcall init_lapic_sysfs+0x0/0x24 returned 0 after 0 usecs
[ 0.438923] calling pgd_cache_init+0x0/0x35 @ 1
[ 0.438929] initcall pgd_cache_init+0x0/0x35 returned 0 after 0 usecs
[ 0.438934] calling alloc_frozen_cpus+0x0/0xc @ 1
[ 0.438937] initcall alloc_frozen_cpus+0x0/0xc returned 0 after 0 usecs
[ 0.438942] calling cpu_hotplug_pm_sync_init+0x0/0x16 @ 1
[ 0.438947] initcall cpu_hotplug_pm_sync_init+0x0/0x16 returned 0 after 0 usecs
[ 0.438950] calling wq_sysfs_init+0x0/0x29 @ 1
[ 0.438985] initcall wq_sysfs_init+0x0/0x29 returned 0 after 0 usecs
[ 0.438988] calling ksysfs_init+0x0/0x7d @ 1
[ 0.439007] initcall ksysfs_init+0x0/0x7d returned 0 after 0 usecs
[ 0.439010] calling pm_init+0x0/0x63 @ 1
[ 0.439039] initcall pm_init+0x0/0x63 returned 0 after 0 usecs
[ 0.439043] calling rcu_set_runtime_mode+0x0/0x16 @ 1
[ 0.439047] initcall rcu_set_runtime_mode+0x0/0x16 returned 0 after 0 usecs
[ 0.439051] calling init_jiffies_clocksource+0x0/0x1b @ 1
[ 0.439056] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.439061] initcall init_jiffies_clocksource+0x0/0x1b returned 0 after 0 usecs
[ 0.439065] calling futex_init+0x0/0xd5 @ 1
[ 0.439071] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.439089] initcall futex_init+0x0/0xd5 returned 0 after 0 usecs
[ 0.439094] calling cgroup_wq_init+0x0/0x2c @ 1
[ 0.439105] initcall cgroup_wq_init+0x0/0x2c returned 0 after 0 usecs
[ 0.439110] calling cgroup1_wq_init+0x0/0x2c @ 1
[ 0.439120] initcall cgroup1_wq_init+0x0/0x2c returned 0 after 0 usecs
[ 0.439125] calling ftrace_mod_cmd_init+0x0/0xf @ 1
[ 0.439129] initcall ftrace_mod_cmd_init+0x0/0xf returned 0 after 0 usecs
[ 0.439133] calling init_wakeup_tracer+0x0/0x2b @ 1
[ 0.439138] initcall init_wakeup_tracer+0x0/0x2b returned 0 after 0 usecs
[ 0.439141] calling init_graph_trace+0x0/0x5a @ 1
[ 0.439149] initcall init_graph_trace+0x0/0x5a returned 0 after 0 usecs
[ 0.439152] calling init_per_zone_wmark_min+0x0/0x66 @ 1
[ 0.439161] initcall init_per_zone_wmark_min+0x0/0x66 returned 0 after 0 usecs
[ 0.439166] calling init_zero_pfn+0x0/0x47 @ 1
[ 0.439170] initcall init_zero_pfn+0x0/0x47 returned 0 after 0 usecs
[ 0.439174] calling cma_init_reserved_areas+0x0/0x170 @ 1
[ 0.439177] initcall cma_init_reserved_areas+0x0/0x170 returned 0 after 0 usecs
[ 0.439180] calling fsnotify_init+0x0/0x44 @ 1
[ 0.439211] initcall fsnotify_init+0x0/0x44 returned 0 after 0 usecs
[ 0.439215] calling filelock_init+0x0/0x7f @ 1
[ 0.439230] initcall filelock_init+0x0/0x7f returned 0 after 0 usecs
[ 0.439234] calling init_script_binfmt+0x0/0x18 @ 1
[ 0.439238] initcall init_script_binfmt+0x0/0x18 returned 0 after 0 usecs
[ 0.439241] calling init_elf_binfmt+0x0/0x18 @ 1
[ 0.439245] initcall init_elf_binfmt+0x0/0x18 returned 0 after 0 usecs
[ 0.439249] calling configfs_init+0x0/0x88 @ 1
[ 0.439258] initcall configfs_init+0x0/0x88 returned 0 after 0 usecs
[ 0.439261] calling debugfs_init+0x0/0x4b @ 1
[ 0.439265] initcall debugfs_init+0x0/0x4b returned 0 after 0 usecs
[ 0.439268] calling tracefs_init+0x0/0x39 @ 1
[ 0.439272] initcall tracefs_init+0x0/0x39 returned 0 after 0 usecs
[ 0.439275] calling securityfs_init+0x0/0x63 @ 1
[ 0.439324] initcall securityfs_init+0x0/0x63 returned 0 after 0 usecs
[ 0.439329] calling prandom_init+0x0/0xb1 @ 1
[ 0.439333] initcall prandom_init+0x0/0xb1 returned 0 after 0 usecs
[ 0.439337] calling pinctrl_init+0x0/0x9d @ 1
[ 0.439339] pinctrl core: initialized pinctrl subsystem
[ 0.439363] initcall pinctrl_init+0x0/0x9d returned 0 after 0 usecs
[ 0.439367] calling gpiolib_dev_init+0x0/0xb3 @ 1
[ 0.439390] initcall gpiolib_dev_init+0x0/0xb3 returned 0 after 0 usecs
[ 0.439395] calling component_debug_init+0x0/0x1d @ 1
[ 0.439401] initcall component_debug_init+0x0/0x1d returned 0 after 0 usecs
[ 0.439407] calling early_resume_init+0x0/0xf0 @ 1
[ 0.439498] RTC time: 7:13:23, date: 09/24/18
[ 0.439502] initcall early_resume_init+0x0/0xf0 returned 0 after 0 usecs
[ 0.439507] calling opp_debug_init+0x0/0x39 @ 1
[ 0.439513] initcall opp_debug_init+0x0/0x39 returned 0 after 0 usecs
[ 0.439517] calling cpufreq_core_init+0x0/0x46 @ 1
[ 0.439524] initcall cpufreq_core_init+0x0/0x46 returned 0 after 0 usecs
[ 0.439528] calling cpuidle_init+0x0/0x3b @ 1
[ 0.439537] initcall cpuidle_init+0x0/0x3b returned 0 after 0 usecs
[ 0.439540] calling bsp_pm_check_init+0x0/0x16 @ 1
[ 0.439544] initcall bsp_pm_check_init+0x0/0x16 returned 0 after 0 usecs
[ 0.439547] calling sock_init+0x0/0x8e @ 1
[ 0.439685] initcall sock_init+0x0/0x8e returned 0 after 0 usecs
[ 0.439689] calling net_inuse_init+0x0/0x24 @ 1
[ 0.439696] initcall net_inuse_init+0x0/0x24 returned 0 after 0 usecs
[ 0.439699] calling net_defaults_init+0x0/0x24 @ 1
[ 0.439703] initcall net_defaults_init+0x0/0x24 returned 0 after 0 usecs
[ 0.439707] calling init_default_flow_dissectors+0x0/0x48 @ 1
[ 0.439712] initcall init_default_flow_dissectors+0x0/0x48 returned 0 after 0 usecs
[ 0.439743] calling netpoll_init+0x0/0x34 @ 1
[ 0.439743] initcall netpoll_init+0x0/0x34 returned 0 after 0 usecs
[ 0.439743] calling netlink_proto_init+0x0/0x123 @ 1
[ 0.439777] NET: Registered protocol family 16
[ 0.439802] initcall netlink_proto_init+0x0/0x123 returned 0 after 0 usecs
[ 0.440027] calling irq_sysfs_init+0x0/0x7e @ 1
[ 0.440174] initcall irq_sysfs_init+0x0/0x7e returned 0 after 0 usecs
[ 0.440180] calling audit_init+0x0/0x164 @ 1
[ 0.440186] audit: initializing netlink subsys (disabled)
[ 0.440224] initcall audit_init+0x0/0x164 returned 0 after 0 usecs
[ 0.440224] audit: type=2000 audit(1537773203.113:1): state=initialized audit_enabled=0 res=1
[ 0.440224] calling release_early_probes+0x0/0x36 @ 1
[ 0.440224] initcall release_early_probes+0x0/0x36 returned 0 after 0 usecs
[ 0.440224] calling bdi_class_init+0x0/0x41 @ 1
[ 0.440224] initcall bdi_class_init+0x0/0x41 returned 0 after 0 usecs
[ 0.440224] calling mm_sysfs_init+0x0/0x27 @ 1
[ 0.440224] initcall mm_sysfs_init+0x0/0x27 returned 0 after 0 usecs
[ 0.440224] calling gpiolib_sysfs_init+0x0/0x85 @ 1
[ 0.440224] initcall gpiolib_sysfs_init+0x0/0x85 returned 0 after 0 usecs
[ 0.440224] calling pcibus_class_init+0x0/0x19 @ 1
[ 0.440224] initcall pcibus_class_init+0x0/0x19 returned 0 after 0 usecs
[ 0.440224] calling pci_driver_init+0x0/0x22 @ 1
[ 0.440224] initcall pci_driver_init+0x0/0x22 returned 0 after 0 usecs
[ 0.440224] calling backlight_class_init+0x0/0x91 @ 1
[ 0.440224] initcall backlight_class_init+0x0/0x91 returned 0 after 0 usecs
[ 0.440224] calling tty_class_init+0x0/0x30 @ 1
[ 0.440224] initcall tty_class_init+0x0/0x30 returned 0 after 0 usecs
[ 0.440224] calling vtconsole_class_init+0x0/0xc0 @ 1
[ 0.440224] initcall vtconsole_class_init+0x0/0xc0 returned 0 after 0 usecs
[ 0.440224] calling wakeup_sources_debugfs_init+0x0/0x24 @ 1
[ 0.440224] initcall wakeup_sources_debugfs_init+0x0/0x24 returned 0 after 0 usecs
[ 0.440224] calling regmap_initcall+0x0/0x11 @ 1
[ 0.440224] initcall regmap_initcall+0x0/0x11 returned 0 after 0 usecs
[ 0.440224] calling i2c_init+0x0/0xa5 @ 1
[ 0.440224] initcall i2c_init+0x0/0xa5 returned 0 after 0 usecs
[ 0.440224] calling init_menu+0x0/0x14 @ 1
[ 0.440786] cpuidle: using governor menu
[ 0.440786] initcall init_menu+0x0/0x14 returned 0 after 976 usecs
[ 0.440786] calling pcc_init+0x0/0x2e4 @ 1
[ 0.440786] initcall pcc_init+0x0/0x2e4 returned -19 after 0 usecs
[ 0.440786] calling amd_postcore_init+0x0/0xf2 @ 1
[ 0.440799] initcall amd_postcore_init+0x0/0xf2 returned 0 after 0 usecs
[ 0.440799] calling kobject_uevent_init+0x0/0xf @ 1
[ 0.440799] initcall kobject_uevent_init+0x0/0xf returned 0 after 0 usecs
[ 0.440991] calling bts_init+0x0/0xae @ 1
[ 0.440994] initcall bts_init+0x0/0xae returned -19 after 0 usecs
[ 0.440998] calling pt_init+0x0/0x2f9 @ 1
[ 0.441001] initcall pt_init+0x0/0x2f9 returned -19 after 0 usecs
[ 0.441005] calling boot_params_ksysfs_init+0x0/0x216 @ 1
[ 0.441016] initcall boot_params_ksysfs_init+0x0/0x216 returned 0 after 0 usecs
[ 0.441020] calling sbf_init+0x0/0xc8 @ 1
[ 0.441024] initcall sbf_init+0x0/0xc8 returned 0 after 0 usecs
[ 0.441028] calling arch_kdebugfs_init+0x0/0x23 @ 1
[ 0.441039] initcall arch_kdebugfs_init+0x0/0x23 returned 0 after 0 usecs
[ 0.441043] calling init_pit_clocksource+0x0/0x37 @ 1
[ 0.441047] initcall init_pit_clocksource+0x0/0x37 returned 0 after 0 usecs
[ 0.441051] calling intel_pconfig_init+0x0/0xbb @ 1
[ 0.441055] initcall intel_pconfig_init+0x0/0xbb returned 0 after 0 usecs
[ 0.441060] calling mtrr_if_init+0x0/0x51 @ 1
[ 0.441066] initcall mtrr_if_init+0x0/0x51 returned 0 after 0 usecs
[ 0.441069] calling ffh_cstate_init+0x0/0x2d @ 1
[ 0.441076] initcall ffh_cstate_init+0x0/0x2d returned 0 after 0 usecs
[ 0.441080] calling kdump_buf_page_init+0x0/0x3b @ 1
[ 0.441084] initcall kdump_buf_page_init+0x0/0x3b returned 0 after 0 usecs
[ 0.441088] calling acpi_pci_init+0x0/0x5b @ 1
[ 0.441091] ACPI: bus type PCI registered
[ 0.441095] initcall acpi_pci_init+0x0/0x5b returned 0 after 0 usecs
[ 0.441099] calling dma_channel_table_init+0x0/0xc2 @ 1
[ 0.441109] initcall dma_channel_table_init+0x0/0xc2 returned 0 after 0 usecs
[ 0.441112] calling dma_bus_init+0x0/0x91 @ 1
[ 0.441137] initcall dma_bus_init+0x0/0x91 returned 0 after 0 usecs
[ 0.441140] calling dmi_id_init+0x0/0x2b8 @ 1
[ 0.441206] initcall dmi_id_init+0x0/0x2b8 returned 0 after 0 usecs
[ 0.441209] calling pci_arch_init+0x0/0x6b @ 1
[ 0.442258] PCI: PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[ 0.442260] bios32_service(0x49435024): not present
[ 0.442262] PCI: Using configuration type 1 for base access
[ 0.442263] PCI: Using configuration type 1 for extended access
[ 0.442276] initcall pci_arch_init+0x0/0x6b returned 0 after 976 usecs
[ 0.442498] calling fixup_ht_bug+0x0/0x8e @ 1
[ 0.442502] initcall fixup_ht_bug+0x0/0x8e returned 0 after 0 usecs
[ 0.442506] calling topology_init+0x0/0x30 @ 1
[ 0.442640] initcall topology_init+0x0/0x30 returned 0 after 0 usecs
[ 0.442646] calling mtrr_init_finialize+0x0/0x41 @ 1
[ 0.442649] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.442650] mtrr: probably your BIOS does not setup all CPUs.
[ 0.442651] mtrr: corrected configuration.
[ 0.442654] initcall mtrr_init_finialize+0x0/0x41 returned 0 after 0 usecs
[ 0.442657] calling uid_cache_init+0x0/0x7b @ 1
[ 0.442665] initcall uid_cache_init+0x0/0x7b returned 0 after 0 usecs
[ 0.442668] calling param_sysfs_init+0x0/0x196 @ 1
[ 0.446334] initcall param_sysfs_init+0x0/0x196 returned 0 after 3906 usecs
[ 0.446338] calling user_namespace_sysctl_init+0x0/0x40 @ 1
[ 0.446361] initcall user_namespace_sysctl_init+0x0/0x40 returned 0 after 0 usecs
[ 0.446365] calling proc_schedstat_init+0x0/0x23 @ 1
[ 0.446372] initcall proc_schedstat_init+0x0/0x23 returned 0 after 0 usecs
[ 0.446375] calling pm_sysrq_init+0x0/0x1b @ 1
[ 0.446411] initcall pm_sysrq_init+0x0/0x1b returned 0 after 0 usecs
[ 0.446411] calling create_proc_profile+0x0/0x100 @ 1
[ 0.446411] initcall create_proc_profile+0x0/0x100 returned 0 after 0 usecs
[ 0.446411] calling crash_save_vmcoreinfo_init+0x0/0x4e1 @ 1
[ 0.446411] initcall crash_save_vmcoreinfo_init+0x0/0x4e1 returned 0 after 0 usecs
[ 0.446411] calling crash_notes_memory_init+0x0/0x36 @ 1
[ 0.446411] initcall crash_notes_memory_init+0x0/0x36 returned 0 after 0 usecs
[ 0.446411] calling cgroup_sysfs_init+0x0/0x19 @ 1
[ 0.446746] initcall cgroup_sysfs_init+0x0/0x19 returned 0 after 976 usecs
[ 0.446751] calling cgroup_namespaces_init+0x0/0xc @ 1
[ 0.446755] initcall cgroup_namespaces_init+0x0/0xc returned 0 after 0 usecs
[ 0.446759] calling user_namespaces_init+0x0/0x2c @ 1
[ 0.446792] initcall user_namespaces_init+0x0/0x2c returned 0 after 0 usecs
[ 0.446796] calling dev_map_init+0x0/0x16 @ 1
[ 0.446801] initcall dev_map_init+0x0/0x16 returned 0 after 0 usecs
[ 0.446805] calling stack_map_init+0x0/0x40 @ 1
[ 0.446808] initcall stack_map_init+0x0/0x40 returned 0 after 0 usecs
[ 0.446811] calling oom_init+0x0/0x2e @ 1
[ 0.446820] initcall oom_init+0x0/0x2e returned 0 after 0 usecs
[ 0.446820] calling default_bdi_init+0x0/0xa7 @ 1
[ 0.446839] initcall default_bdi_init+0x0/0xa7 returned 0 after 0 usecs
[ 0.446844] calling cgwb_init+0x0/0x2c @ 1
[ 0.446856] initcall cgwb_init+0x0/0x2c returned 0 after 0 usecs
[ 0.446861] calling percpu_enable_async+0x0/0x13 @ 1
[ 0.446865] initcall percpu_enable_async+0x0/0x13 returned 0 after 0 usecs
[ 0.446869] calling kcompactd_init+0x0/0x49 @ 1
[ 0.446881] initcall kcompactd_init+0x0/0x49 returned 0 after 0 usecs
[ 0.446881] calling init_user_reserve+0x0/0x40 @ 1
[ 0.446881] initcall init_user_reserve+0x0/0x40 returned 0 after 0 usecs
[ 0.446881] calling init_admin_reserve+0x0/0x40 @ 1
[ 0.446881] initcall init_admin_reserve+0x0/0x40 returned 0 after 0 usecs
[ 0.446881] calling init_reserve_notifier+0x0/0x3 @ 1
[ 0.446881] initcall init_reserve_notifier+0x0/0x3 returned 0 after 0 usecs
[ 0.446881] calling swap_init_sysfs+0x0/0x5d @ 1
[ 0.446881] initcall swap_init_sysfs+0x0/0x5d returned 0 after 0 usecs
[ 0.446881] calling swapfile_init+0x0/0x40 @ 1
[ 0.446881] initcall swapfile_init+0x0/0x40 returned 0 after 0 usecs
[ 0.446881] calling hugetlb_init+0x0/0x3ba @ 1
[ 0.446881] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.446881] initcall hugetlb_init+0x0/0x3ba returned 0 after 0 usecs
[ 0.446881] calling ksm_init+0x0/0x154 @ 1
[ 0.446881] initcall ksm_init+0x0/0x154 returned 0 after 0 usecs
[ 0.446881] calling hugepage_init+0x0/0x12e @ 1
[ 0.446881] initcall hugepage_init+0x0/0x12e returned 0 after 0 usecs
[ 0.446881] calling mem_cgroup_init+0x0/0xc0 @ 1
[ 0.446881] initcall mem_cgroup_init+0x0/0xc0 returned 0 after 0 usecs
[ 0.446881] calling mem_cgroup_swap_init+0x0/0x4e @ 1
[ 0.446881] initcall mem_cgroup_swap_init+0x0/0x4e returned 0 after 0 usecs
[ 0.446881] calling sel_ib_pkey_init+0x0/0x30 @ 1
[ 0.446881] initcall sel_ib_pkey_init+0x0/0x30 returned 0 after 0 usecs
[ 0.446881] calling crypto_wq_init+0x0/0x2c @ 1
[ 0.446881] initcall crypto_wq_init+0x0/0x2c returned 0 after 0 usecs
[ 0.446881] calling cryptomgr_init+0x0/0x14 @ 1
[ 0.446881] initcall cryptomgr_init+0x0/0x14 returned 0 after 0 usecs
[ 0.446881] calling cryptd_init+0x0/0xa2 @ 1
[ 0.446881] cryptd: max_cpu_qlen set to 1000
[ 0.446881] initcall cryptd_init+0x0/0xa2 returned 0 after 0 usecs
[ 0.446881] calling init_bio+0x0/0xbe @ 1
[ 0.446881] initcall init_bio+0x0/0xbe returned 0 after 0 usecs
[ 0.446881] calling blk_settings_init+0x0/0x22 @ 1
[ 0.446881] initcall blk_settings_init+0x0/0x22 returned 0 after 0 usecs
[ 0.446881] calling blk_ioc_init+0x0/0x29 @ 1
[ 0.446881] initcall blk_ioc_init+0x0/0x29 returned 0 after 0 usecs
[ 0.446881] calling blk_softirq_init+0x0/0x63 @ 1
[ 0.446881] initcall blk_softirq_init+0x0/0x63 returned 0 after 0 usecs
[ 0.446881] calling blk_mq_init+0x0/0x26 @ 1
[ 0.446881] initcall blk_mq_init+0x0/0x26 returned 0 after 0 usecs
[ 0.446881] calling genhd_device_init+0x0/0x66 @ 1
[ 0.447796] initcall genhd_device_init+0x0/0x66 returned 0 after 976 usecs
[ 0.447801] calling irq_poll_setup+0x0/0x5e @ 1
[ 0.447805] initcall irq_poll_setup+0x0/0x5e returned 0 after 0 usecs
[ 0.447809] calling byt_gpio_init+0x0/0x16 @ 1
[ 0.447826] initcall byt_gpio_init+0x0/0x16 returned 0 after 0 usecs
[ 0.447830] calling gpiolib_debugfs_init+0x0/0x24 @ 1
[ 0.447837] initcall gpiolib_debugfs_init+0x0/0x24 returned 0 after 0 usecs
[ 0.447841] calling pwm_debugfs_init+0x0/0x24 @ 1
[ 0.447846] initcall pwm_debugfs_init+0x0/0x24 returned 0 after 0 usecs
[ 0.447850] calling pwm_sysfs_init+0x0/0x19 @ 1
[ 0.447860] initcall pwm_sysfs_init+0x0/0x19 returned 0 after 0 usecs
[ 0.447865] calling pci_slot_init+0x0/0x40 @ 1
[ 0.447873] initcall pci_slot_init+0x0/0x40 returned 0 after 0 usecs
[ 0.447877] calling fbmem_init+0x0/0xcc @ 1
[ 0.447936] initcall fbmem_init+0x0/0xcc returned 0 after 0 usecs
[ 0.447940] calling scan_for_dmi_ipmi+0x0/0x10f @ 1
[ 0.447945] initcall scan_for_dmi_ipmi+0x0/0x10f returned 0 after 0 usecs
[ 0.447949] calling acpi_init+0x0/0x2e2 @ 1
[ 0.447979] ACPI: Added _OSI(Module Device)
[ 0.447981] ACPI: Added _OSI(Processor Device)
[ 0.447983] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.447985] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.447987] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.447990] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.460519] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.464473] ACPI: Interpreter enabled
[ 0.464519] ACPI: (supports S0 S1 S3 S5)
[ 0.464522] ACPI: Using IOAPIC for interrupt routing
[ 0.464561] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.464980] ACPI: Enabled 19 GPEs in block 00 to 1F
[ 0.474793] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.474807] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.474973] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability LTR]
[ 0.475425] PCI host bridge to bus 0000:00
[ 0.475431] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.475435] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.475438] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.475441] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
[ 0.475445] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.475464] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
[ 0.475477] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x10 @ 1
[ 0.475482] pci 0000:00:00.0: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[ 0.475771] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000
[ 0.475795] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
[ 0.475805] pci 0000:00:01.0: reg 0x14: [io 0x2000-0x20ff]
[ 0.475815] pci 0000:00:01.0: reg 0x18: [mem 0xf0100000-0xf013ffff]
[ 0.475847] pci 0000:00:01.0: enabling Extended Tags
[ 0.475868] pci 0000:00:01.0: calling quirk_no_pm_reset+0x0/0x20 @ 1
[ 0.475873] pci 0000:00:01.0: quirk_no_pm_reset+0x0/0x20 took 0 usecs
[ 0.475908] pci 0000:00:01.0: supports D1 D2
[ 0.476145] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300
[ 0.476168] pci 0000:00:01.1: reg 0x10: [mem 0xf0140000-0xf0143fff]
[ 0.476210] pci 0000:00:01.1: enabling Extended Tags
[ 0.476257] pci 0000:00:01.1: supports D1 D2
[ 0.476592] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.476622] pci 0000:00:11.0: reg 0x10: [io 0x2410-0x2417]
[ 0.476636] pci 0000:00:11.0: reg 0x14: [io 0x2420-0x2423]
[ 0.476649] pci 0000:00:11.0: reg 0x18: [io 0x2418-0x241f]
[ 0.476663] pci 0000:00:11.0: reg 0x1c: [io 0x2424-0x2427]
[ 0.476677] pci 0000:00:11.0: reg 0x20: [io 0x2400-0x240f]
[ 0.476691] pci 0000:00:11.0: reg 0x24: [mem 0xf014b000-0xf014b3ff]
[ 0.477049] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.477075] pci 0000:00:12.0: reg 0x10: [mem 0xf0148000-0xf0148fff]
[ 0.477450] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.477479] pci 0000:00:12.2: reg 0x10: [mem 0xf014c000-0xf014c0ff]
[ 0.477590] pci 0000:00:12.2: supports D1 D2
[ 0.477593] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.477844] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.477870] pci 0000:00:13.0: reg 0x10: [mem 0xf0149000-0xf0149fff]
[ 0.478240] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.478270] pci 0000:00:13.2: reg 0x10: [mem 0xf014d000-0xf014d0ff]
[ 0.478381] pci 0000:00:13.2: supports D1 D2
[ 0.478384] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.478691] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.478700] pci 0000:00:14.0: calling sb600_disable_hpet_bar+0x0/0x80 @ 1
[ 0.478706] pci 0000:00:14.0: sb600_disable_hpet_bar+0x0/0x80 took 0 usecs
[ 0.478808] pci 0000:00:14.0: calling force_disable_hpet_msi+0x0/0x20 @ 1
[ 0.478813] pci 0000:00:14.0: force_disable_hpet_msi+0x0/0x20 took 0 usecs
[ 0.478819] pci 0000:00:14.0: calling sb600_hpet_quirk+0x0/0x80 @ 1
[ 0.478823] pci 0000:00:14.0: sb600_hpet_quirk+0x0/0x80 took 0 usecs
[ 0.479114] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.479148] pci 0000:00:14.2: reg 0x10: [mem 0xf0144000-0xf0147fff 64bit]
[ 0.479242] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.479538] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.479930] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.480285] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.480311] pci 0000:00:14.5: reg 0x10: [mem 0xf014a000-0xf014afff]
[ 0.480692] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[ 0.480753] pci 0000:00:15.0: enabling Extended Tags
[ 0.480825] pci 0000:00:15.0: supports D1 D2
[ 0.481146] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
[ 0.481206] pci 0000:00:15.1: enabling Extended Tags
[ 0.481276] pci 0000:00:15.1: supports D1 D2
[ 0.481604] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
[ 0.481615] pci 0000:00:18.0: calling quirk_mmio_always_on+0x0/0x10 @ 1
[ 0.481620] pci 0000:00:18.0: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[ 0.481878] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
[ 0.481887] pci 0000:00:18.1: calling quirk_mmio_always_on+0x0/0x10 @ 1
[ 0.481892] pci 0000:00:18.1: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[ 0.482137] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
[ 0.482146] pci 0000:00:18.2: calling quirk_mmio_always_on+0x0/0x10 @ 1
[ 0.482150] pci 0000:00:18.2: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[ 0.482393] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
[ 0.482402] pci 0000:00:18.3: calling quirk_mmio_always_on+0x0/0x10 @ 1
[ 0.482407] pci 0000:00:18.3: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[ 0.482669] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
[ 0.482678] pci 0000:00:18.4: calling quirk_mmio_always_on+0x0/0x10 @ 1
[ 0.482683] pci 0000:00:18.4: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[ 0.482932] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
[ 0.482941] pci 0000:00:18.5: calling quirk_mmio_always_on+0x0/0x10 @ 1
[ 0.482946] pci 0000:00:18.5: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[ 0.483185] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
[ 0.483194] pci 0000:00:18.6: calling quirk_mmio_always_on+0x0/0x10 @ 1
[ 0.483199] pci 0000:00:18.6: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[ 0.483436] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
[ 0.483445] pci 0000:00:18.7: calling quirk_mmio_always_on+0x0/0x10 @ 1
[ 0.483449] pci 0000:00:18.7: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[ 0.483776] pci_bus 0000:01: extended config space not accessible
[ 0.483877] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
[ 0.483890] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.483894] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.483897] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.483900] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
[ 0.483979] pci 0000:00:15.0: PCI bridge to [bus 02]
[ 0.484092] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.484134] pci 0000:03:00.0: reg 0x10: [io 0x1000-0x10ff]
[ 0.484174] pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
[ 0.484198] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.484343] pci 0000:03:00.0: supports D1 D2
[ 0.484346] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.484407] pci 0000:03:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:15.1 (capable of 7.876 Gb/s with 8 GT/s x1 link)
[ 0.486797] pci 0000:00:15.1: PCI bridge to [bus 03]
[ 0.486811] pci 0000:00:15.1: bridge window [io 0x1000-0x1fff]
[ 0.486827] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.486871] pci_bus 0000:00: on NUMA node 0
[ 0.488386] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.488722] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.489068] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.489398] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.489728] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.490071] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0, disabled.
[ 0.490396] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.490725] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.491219] initcall acpi_init+0x0/0x2e2 returned 0 after 41992 usecs
[ 0.491225] calling pnp_init+0x0/0x14 @ 1
[ 0.491247] initcall pnp_init+0x0/0x14 returned 0 after 0 usecs
[ 0.491252] calling misc_init+0x0/0xae @ 1
[ 0.491270] initcall misc_init+0x0/0xae returned 0 after 0 usecs
[ 0.491274] calling vga_arb_device_init+0x0/0x231 @ 1
[ 0.491323] pci 0000:00:01.0: vgaarb: setting as boot VGA device
[ 0.491323] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.491323] pci 0000:00:01.0: vgaarb: bridge control possible
[ 0.491323] vgaarb: loaded
[ 0.491323] initcall vga_arb_device_init+0x0/0x231 returned 0 after 0 usecs
[ 0.491323] calling cn_init+0x0/0xd0 @ 1
[ 0.491323] initcall cn_init+0x0/0xd0 returned 0 after 0 usecs
[ 0.491323] calling dax_fs_init+0x0/0xab @ 1
[ 0.491323] initcall dax_fs_init+0x0/0xab returned 0 after 0 usecs
[ 0.491323] calling dma_buf_init+0x0/0x99 @ 1
[ 0.491323] initcall dma_buf_init+0x0/0x99 returned 0 after 0 usecs
[ 0.491323] calling init_scsi+0x0/0x90 @ 1
[ 0.491780] SCSI subsystem initialized
[ 0.491784] initcall init_scsi+0x0/0x90 returned 0 after 976 usecs
[ 0.491788] calling ata_init+0x0/0x2a7 @ 1
[ 0.491865] libata version 3.00 loaded.
[ 0.491865] initcall ata_init+0x0/0x2a7 returned 0 after 0 usecs
[ 0.491865] calling phy_init+0x0/0x4c @ 1
[ 0.491865] initcall phy_init+0x0/0x4c returned 0 after 0 usecs
[ 0.491865] calling usb_init+0x0/0x11b @ 1
[ 0.491865] ACPI: bus type USB registered
[ 0.491877] usbcore: registered new interface driver usbfs
[ 0.491895] usbcore: registered new interface driver hub
[ 0.491916] usbcore: registered new device driver usb
[ 0.491921] initcall usb_init+0x0/0x11b returned 0 after 0 usecs
[ 0.491925] calling serio_init+0x0/0x2d @ 1
[ 0.491943] initcall serio_init+0x0/0x2d returned 0 after 0 usecs
[ 0.491948] calling input_init+0x0/0xe3 @ 1
[ 0.491961] initcall input_init+0x0/0xe3 returned 0 after 0 usecs
[ 0.491966] calling rtc_init+0x0/0x47 @ 1
[ 0.491976] initcall rtc_init+0x0/0x47 returned 0 after 0 usecs
[ 0.491981] calling power_supply_class_init+0x0/0x3a @ 1
[ 0.491990] initcall power_supply_class_init+0x0/0x3a returned 0 after 0 usecs
[ 0.491995] calling hwmon_init+0x0/0xd5 @ 1
[ 0.492007] initcall hwmon_init+0x0/0xd5 returned 0 after 0 usecs
[ 0.492012] calling leds_init+0x0/0x37 @ 1
[ 0.492021] initcall leds_init+0x0/0x37 returned 0 after 0 usecs
[ 0.492025] calling dmi_init+0x0/0xf8 @ 1
[ 0.492049] initcall dmi_init+0x0/0xf8 returned 0 after 0 usecs
[ 0.492053] calling devfreq_init+0x0/0x90 @ 1
[ 0.492104] initcall devfreq_init+0x0/0x90 returned 0 after 0 usecs
[ 0.492104] calling ras_init+0x0/0x14 @ 1
[ 0.492104] initcall ras_init+0x0/0x14 returned 0 after 0 usecs
[ 0.492104] calling nvmem_init+0x0/0x14 @ 1
[ 0.492104] initcall nvmem_init+0x0/0x14 returned 0 after 0 usecs
[ 0.492104] calling pci_subsys_init+0x0/0x65 @ 1
[ 0.492104] PCI: Using ACPI for IRQ routing
[ 0.492104] PCI: pci_cache_line_size set to 64 bytes
[ 0.492104] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.492104] e820: reserve RAM buffer [mem 0xc7d3a000-0xc7ffffff]
[ 0.492104] e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff]
[ 0.492104] initcall pci_subsys_init+0x0/0x65 returned 0 after 0 usecs
[ 0.492104] calling proto_init+0x0/0x14 @ 1
[ 0.492104] initcall proto_init+0x0/0x14 returned 0 after 0 usecs
[ 0.492104] calling net_dev_init+0x0/0x1e9 @ 1
[ 0.492186] initcall net_dev_init+0x0/0x1e9 returned 0 after 976 usecs
[ 0.492190] calling neigh_init+0x0/0x78 @ 1
[ 0.492195] initcall neigh_init+0x0/0x78 returned 0 after 0 usecs
[ 0.492747] calling fib_notifier_init+0x0/0x14 @ 1
[ 0.492751] initcall fib_notifier_init+0x0/0x14 returned 0 after 0 usecs
[ 0.492755] calling fib_rules_init+0x0/0xa6 @ 1
[ 0.492761] initcall fib_rules_init+0x0/0xa6 returned 0 after 0 usecs
[ 0.492765] calling init_cgroup_netprio+0x0/0x16 @ 1
[ 0.492769] initcall init_cgroup_netprio+0x0/0x16 returned 0 after 0 usecs
[ 0.492773] calling bpf_lwt_init+0x0/0x19 @ 1
[ 0.492776] initcall bpf_lwt_init+0x0/0x19 returned 0 after 0 usecs
[ 0.492780] calling pktsched_init+0x0/0xf6 @ 1
[ 0.492789] initcall pktsched_init+0x0/0xf6 returned 0 after 0 usecs
[ 0.492793] calling tc_filter_init+0x0/0xe3 @ 1
[ 0.492812] initcall tc_filter_init+0x0/0xe3 returned 0 after 0 usecs
[ 0.492817] calling tc_action_init+0x0/0x65 @ 1
[ 0.492824] initcall tc_action_init+0x0/0x65 returned 0 after 0 usecs
[ 0.492828] calling genl_init+0x0/0x33 @ 1
[ 0.492848] initcall genl_init+0x0/0x33 returned 0 after 0 usecs
[ 0.493085] calling nmi_warning_debugfs+0x0/0x26 @ 1
[ 0.493093] initcall nmi_warning_debugfs+0x0/0x26 returned 0 after 0 usecs
[ 0.493099] calling hpet_late_init+0x0/0xf6 @ 1
[ 0.493177] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.493184] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.494744] initcall hpet_late_init+0x0/0xf6 returned 0 after 1953 usecs
[ 0.494748] calling init_amd_nbs+0x0/0x103 @ 1
[ 0.494796] initcall init_amd_nbs+0x0/0x103 returned 0 after 0 usecs
[ 0.494801] calling sugov_register+0x0/0x14 @ 1
[ 0.494805] initcall sugov_register+0x0/0x14 returned 0 after 0 usecs
[ 0.494810] calling clocksource_done_booting+0x0/0x40 @ 1
[ 0.494835] clocksource: Switched to clocksource tsc-early
[ 0.494839] initcall clocksource_done_booting+0x0/0x40 returned 0 after 10 usecs
[ 0.494844] initcall tracer_init_tracefs blacklisted
[ 0.494848] calling init_trace_printk_function_export+0x0/0x2d @ 1
[ 0.494885] initcall init_trace_printk_function_export+0x0/0x2d returned 0 after 31 usecs
[ 0.494888] calling init_graph_tracefs+0x0/0x2d @ 1
[ 0.494894] initcall init_graph_tracefs+0x0/0x2d returned 0 after 2 usecs
[ 0.494897] calling init_kprobe_trace+0x0/0x83 @ 1
[ 0.494906] initcall init_kprobe_trace+0x0/0x83 returned 0 after 5 usecs
[ 0.494910] calling init_uprobe_trace+0x0/0x4c @ 1
[ 0.494927] initcall init_uprobe_trace+0x0/0x4c returned 0 after 13 usecs
[ 0.494930] calling bpf_init+0x0/0x42 @ 1
[ 0.494940] initcall bpf_init+0x0/0x42 returned 0 after 7 usecs
[ 0.494944] calling init_pipe_fs+0x0/0x42 @ 1
[ 0.494959] initcall init_pipe_fs+0x0/0x42 returned 0 after 11 usecs
[ 0.494963] calling cgroup_writeback_init+0x0/0x2c @ 1
[ 0.494985] initcall cgroup_writeback_init+0x0/0x2c returned 0 after 18 usecs
[ 0.494989] calling inotify_user_setup+0x0/0x4a @ 1
[ 0.495015] initcall inotify_user_setup+0x0/0x4a returned 0 after 22 usecs
[ 0.495019] calling eventpoll_init+0x0/0xab @ 1
[ 0.495037] initcall eventpoll_init+0x0/0xab returned 0 after 14 usecs
[ 0.495041] calling anon_inode_init+0x0/0x4e @ 1
[ 0.495055] initcall anon_inode_init+0x0/0x4e returned 0 after 10 usecs
[ 0.495059] calling init_dax_wait_table+0x0/0x2f @ 1
[ 0.495093] initcall init_dax_wait_table+0x0/0x2f returned 0 after 29 usecs
[ 0.495097] calling proc_locks_init+0x0/0x23 @ 1
[ 0.495104] initcall proc_locks_init+0x0/0x23 returned 0 after 3 usecs
[ 0.495107] calling dquot_init+0x0/0xfa @ 1
[ 0.495109] VFS: Disk quotas dquot_6.6.0
[ 0.495145] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.495149] initcall dquot_init+0x0/0xfa returned 0 after 37 usecs
[ 0.495153] calling quota_init+0x0/0x25 @ 1
[ 0.495171] initcall quota_init+0x0/0x25 returned 0 after 14 usecs
[ 0.495175] calling proc_cmdline_init+0x0/0x21 @ 1
[ 0.495181] initcall proc_cmdline_init+0x0/0x21 returned 0 after 2 usecs
[ 0.495184] calling proc_consoles_init+0x0/0x23 @ 1
[ 0.495189] initcall proc_consoles_init+0x0/0x23 returned 0 after 1 usecs
[ 0.495193] calling proc_cpuinfo_init+0x0/0x1f @ 1
[ 0.495198] initcall proc_cpuinfo_init+0x0/0x1f returned 0 after 1 usecs
[ 0.495201] calling proc_devices_init+0x0/0x23 @ 1
[ 0.495206] initcall proc_devices_init+0x0/0x23 returned 0 after 1 usecs
[ 0.495209] calling proc_interrupts_init+0x0/0x23 @ 1
[ 0.495214] initcall proc_interrupts_init+0x0/0x23 returned 0 after 1 usecs
[ 0.495218] calling proc_loadavg_init+0x0/0x21 @ 1
[ 0.495222] initcall proc_loadavg_init+0x0/0x21 returned 0 after 1 usecs
[ 0.495226] calling proc_meminfo_init+0x0/0x21 @ 1
[ 0.495230] initcall proc_meminfo_init+0x0/0x21 returned 0 after 1 usecs
[ 0.495234] calling proc_stat_init+0x0/0x1f @ 1
[ 0.495239] initcall proc_stat_init+0x0/0x1f returned 0 after 1 usecs
[ 0.495242] calling proc_uptime_init+0x0/0x21 @ 1
[ 0.495247] initcall proc_uptime_init+0x0/0x21 returned 0 after 1 usecs
[ 0.495251] calling proc_version_init+0x0/0x21 @ 1
[ 0.495255] initcall proc_version_init+0x0/0x21 returned 0 after 1 usecs
[ 0.495259] calling proc_softirqs_init+0x0/0x21 @ 1
[ 0.495260] initcall proc_softirqs_init+0x0/0x21 returned 0 after 1 usecs
[ 0.495260] calling proc_kcore_init+0x0/0x6e @ 1
[ 0.495260] initcall proc_kcore_init+0x0/0x6e returned 0 after 7 usecs
[ 0.495260] calling vmcore_init+0x0/0x679 @ 1
[ 0.495260] initcall vmcore_init+0x0/0x679 returned 0 after 0 usecs
[ 0.495260] calling proc_kmsg_init+0x0/0x22 @ 1
[ 0.495260] initcall proc_kmsg_init+0x0/0x22 returned 0 after 3 usecs
[ 0.495260] calling proc_page_init+0x0/0x4e @ 1
[ 0.495260] initcall proc_page_init+0x0/0x4e returned 0 after 3 usecs
[ 0.495260] calling init_ramfs_fs+0x0/0x23 @ 1
[ 0.495260] initcall init_ramfs_fs+0x0/0x23 returned 0 after 0 usecs
[ 0.495260] calling init_hugetlbfs_fs+0x0/0x142 @ 1
[ 0.495289] initcall init_hugetlbfs_fs+0x0/0x142 returned 0 after 38 usecs
[ 0.495294] calling blk_scsi_ioctl_init+0x0/0x352 @ 1
[ 0.495298] initcall blk_scsi_ioctl_init+0x0/0x352 returned 0 after 1 usecs
[ 0.495302] calling dynamic_debug_init_debugfs+0x0/0x5f @ 1
[ 0.495312] initcall dynamic_debug_init_debugfs+0x0/0x5f returned 0 after 6 usecs
[ 0.495318] calling acpi_event_init+0x0/0x31 @ 1
[ 0.495330] initcall acpi_event_init+0x0/0x31 returned 0 after 7 usecs
[ 0.495333] calling pnp_system_init+0x0/0x14 @ 1
[ 0.495355] initcall pnp_system_init+0x0/0x14 returned 0 after 18 usecs
[ 0.495358] calling pnpacpi_init+0x0/0x67 @ 1
[ 0.495360] pnp: PnP ACPI init
[ 0.496132] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.496251] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.496333] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.497010] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.497089] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.497120] pnp: PnP ACPI: found 5 devices
[ 0.497124] initcall pnpacpi_init+0x0/0x67 returned 0 after 1720 usecs
[ 0.497128] calling chr_dev_init+0x0/0x9b @ 1
[ 0.501716] initcall chr_dev_init+0x0/0x9b returned 0 after 4471 usecs
[ 0.501725] calling firmware_class_init+0x0/0xe0 @ 1
[ 0.501731] initcall firmware_class_init+0x0/0xe0 returned 0 after 2 usecs
[ 0.501735] calling thermal_init+0x0/0xce @ 1
[ 0.501769] initcall thermal_init+0x0/0xce returned 0 after 29 usecs
[ 0.501775] calling cpufreq_gov_performance_init+0x0/0x14 @ 1
[ 0.501779] initcall cpufreq_gov_performance_init+0x0/0x14 returned 0 after 0 usecs
[ 0.501784] calling cpufreq_gov_dbs_init+0x0/0x14 @ 1
[ 0.501788] initcall cpufreq_gov_dbs_init+0x0/0x14 returned 0 after 0 usecs
[ 0.501792] calling pcibios_assign_resources+0x0/0x96 @ 1
[ 0.501909] pci 0000:00:14.4: PCI bridge to [bus 01]
[ 0.501928] pci 0000:00:15.0: PCI bridge to [bus 02]
[ 0.501943] pci 0000:00:15.1: PCI bridge to [bus 03]
[ 0.501948] pci 0000:00:15.1: bridge window [io 0x1000-0x1fff]
[ 0.501958] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.501971] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.501974] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.501978] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.501981] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff]
[ 0.501985] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window]
[ 0.501988] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window]
[ 0.501991] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.501994] pci_bus 0000:01: resource 7 [mem 0xe0000000-0xffffffff]
[ 0.501997] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.502001] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.502090] initcall pcibios_assign_resources+0x0/0x96 returned 0 after 286 usecs
[ 0.502094] calling sysctl_core_init+0x0/0x28 @ 1
[ 0.502123] initcall sysctl_core_init+0x0/0x28 returned 0 after 24 usecs
[ 0.502127] calling eth_offload_init+0x0/0x16 @ 1
[ 0.502131] initcall eth_offload_init+0x0/0x16 returned 0 after 0 usecs
[ 0.502135] calling ipv4_offload_init+0x0/0x6e @ 1
[ 0.502140] initcall ipv4_offload_init+0x0/0x6e returned 0 after 1 usecs
[ 0.502144] calling inet_init+0x0/0x240 @ 1
[ 0.502207] NET: Registered protocol family 2
[ 0.502531] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[ 0.502542] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.502569] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.502608] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.502670] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.502683] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.502762] initcall inet_init+0x0/0x240 returned 0 after 580 usecs
[ 0.502768] calling af_unix_init+0x0/0x4c @ 1
[ 0.502780] NET: Registered protocol family 1
[ 0.502792] initcall af_unix_init+0x0/0x4c returned 0 after 19 usecs
[ 0.502797] calling ipv6_offload_init+0x0/0x77 @ 1
[ 0.502802] initcall ipv6_offload_init+0x0/0x77 returned 0 after 1 usecs
[ 0.502807] calling pci_apply_final_quirks+0x0/0x118 @ 1
[ 0.502827] pci 0000:00:01.0: calling pci_fixup_video+0x0/0x110 @ 1
[ 0.502835] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.502840] pci 0000:00:01.0: pci_fixup_video+0x0/0x110 took 8 usecs
[ 0.502849] pci 0000:00:01.1: calling quirk_gpu_hda+0x0/0xb0 @ 1
[ 0.502856] pci 0000:00:01.1: Linked as a consumer to 0000:00:01.0
[ 0.502871] pci 0000:00:01.1: quirk_gpu_hda+0x0/0xb0 took 17 usecs
[ 0.502879] pci 0000:00:11.0: calling quirk_msi_intx_disable_ati_bug+0x0/0x50 @ 1
[ 0.502885] pci 0000:00:11.0: quirk_msi_intx_disable_ati_bug+0x0/0x50 took 2 usecs
[ 0.502966] pci 0000:00:12.0: calling quirk_usb_early_handoff+0x0/0x6f7 @ 1
[ 0.555582] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6f7 took 51361 usecs
[ 0.555668] pci 0000:00:12.2: calling quirk_usb_early_handoff+0x0/0x6f7 @ 1
[ 0.556205] pci 0000:00:12.2: quirk_usb_early_handoff+0x0/0x6f7 took 516 usecs
[ 0.556284] pci 0000:00:13.0: calling quirk_usb_early_handoff+0x0/0x6f7 @ 1
[ 0.556760] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x6f7 took 457 usecs
[ 0.556839] pci 0000:00:13.2: calling quirk_usb_early_handoff+0x0/0x6f7 @ 1
[ 0.557325] pci 0000:00:13.2: quirk_usb_early_handoff+0x0/0x6f7 took 468 usecs
[ 0.557410] pci 0000:00:14.2: calling quirk_gpu_hda+0x0/0xb0 @ 1
[ 0.557414] pci 0000:00:14.2: quirk_gpu_hda+0x0/0xb0 took 0 usecs
[ 0.557433] pci 0000:00:14.5: calling quirk_usb_early_handoff+0x0/0x6f7 @ 1
[ 0.557903] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x6f7 took 453 usecs
[ 0.558024] PCI: CLS 64 bytes, default 64
[ 0.558030] initcall pci_apply_final_quirks+0x0/0x118 returned 0 after 53924 usecs
[ 0.558037] calling acpi_reserve_resources+0x0/0xcd @ 1
[ 0.558046] initcall acpi_reserve_resources+0x0/0xcd returned 0 after 5 usecs
[ 0.558050] calling populate_rootfs+0x0/0xf9 @ 1
[ 0.558167] initcall populate_rootfs+0x0/0xf9 returned 0 after 108 usecs
[ 0.558172] calling pci_iommu_init+0x0/0x3a @ 1
[ 0.558176] initcall pci_iommu_init+0x0/0x3a returned 0 after 0 usecs
[ 0.558411] calling amd_uncore_init+0x0/0x247 @ 1
[ 0.558415] initcall amd_uncore_init+0x0/0x247 returned -19 after 0 usecs
[ 0.558418] calling amd_ibs_init+0x0/0x196 @ 1
[ 0.558422] LVT offset 0 assigned for vector 0x400
[ 0.558483] perf: AMD IBS detected (0x000000ff)
[ 0.558487] initcall amd_ibs_init+0x0/0x196 returned 0 after 63 usecs
[ 0.558491] calling msr_init+0x0/0xb9 @ 1
[ 0.558498] initcall msr_init+0x0/0xb9 returned 0 after 3 usecs
[ 0.558502] calling register_kernel_offset_dumper+0x0/0x1b @ 1
[ 0.558507] initcall register_kernel_offset_dumper+0x0/0x1b returned 0 after 0 usecs
[ 0.558511] calling i8259A_init_ops+0x0/0x25 @ 1
[ 0.558514] initcall i8259A_init_ops+0x0/0x25 returned 0 after 0 usecs
[ 0.558519] calling init_tsc_clocksource+0x0/0xa4 @ 1
[ 0.558528] initcall init_tsc_clocksource+0x0/0xa4 returned 0 after 5 usecs
[ 0.558532] calling add_rtc_cmos+0x0/0xa6 @ 1
[ 0.558537] initcall add_rtc_cmos+0x0/0xa6 returned 0 after 1 usecs
[ 0.558542] calling i8237A_init_ops+0x0/0x3c @ 1
[ 0.558628] initcall i8237A_init_ops+0x0/0x3c returned 0 after 80 usecs
[ 0.558632] calling msr_init+0x0/0xc9 @ 1
[ 0.559062] initcall msr_init+0x0/0xc9 returned 0 after 407 usecs
[ 0.559071] calling cpuid_init+0x0/0xc9 @ 1
[ 0.559331] initcall cpuid_init+0x0/0xc9 returned 0 after 248 usecs
[ 0.559336] calling ioapic_init_ops+0x0/0x16 @ 1
[ 0.559340] initcall ioapic_init_ops+0x0/0x16 returned 0 after 0 usecs
[ 0.559344] calling add_pcspkr+0x0/0x61 @ 1
[ 0.559397] initcall add_pcspkr+0x0/0x61 returned 0 after 47 usecs
[ 0.559404] calling start_periodic_check_for_corruption+0x0/0x40 @ 1
[ 0.559406] Scanning for low memory corruption every 5 seconds
[ 0.559416] initcall start_periodic_check_for_corruption+0x0/0x40 returned 0 after 8 usecs
[ 0.559420] calling sysfb_init+0x0/0x83 @ 1
[ 0.559774] initcall sysfb_init+0x0/0x83 returned 0 after 338 usecs
[ 0.559781] calling pt_dump_init+0x0/0x57 @ 1
[ 0.559785] initcall pt_dump_init+0x0/0x57 returned 0 after 0 usecs
[ 0.559790] calling pt_dump_debug_init+0x0/0x9b @ 1
[ 0.559816] initcall pt_dump_debug_init+0x0/0x9b returned 0 after 20 usecs
[ 0.559821] calling proc_execdomains_init+0x0/0x21 @ 1
[ 0.559832] initcall proc_execdomains_init+0x0/0x21 returned 0 after 6 usecs
[ 0.559837] calling register_warn_debugfs+0x0/0x24 @ 1
[ 0.559850] initcall register_warn_debugfs+0x0/0x24 returned 0 after 8 usecs
[ 0.559855] calling cpuhp_sysfs_init+0x0/0x79 @ 1
[ 0.559877] initcall cpuhp_sysfs_init+0x0/0x79 returned 0 after 17 usecs
[ 0.559880] calling ioresources_init+0x0/0x40 @ 1
[ 0.559887] initcall ioresources_init+0x0/0x40 returned 0 after 3 usecs
[ 0.559891] calling init_sched_debug_procfs+0x0/0x2f @ 1
[ 0.559896] initcall init_sched_debug_procfs+0x0/0x2f returned 0 after 1 usecs
[ 0.559900] calling irq_pm_init_ops+0x0/0x16 @ 1
[ 0.559904] initcall irq_pm_init_ops+0x0/0x16 returned 0 after 0 usecs
[ 0.559908] calling timekeeping_init_ops+0x0/0x16 @ 1
[ 0.559912] initcall timekeeping_init_ops+0x0/0x16 returned 0 after 0 usecs
[ 0.559916] calling init_clocksource_sysfs+0x0/0x24 @ 1
[ 0.559981] initcall init_clocksource_sysfs+0x0/0x24 returned 0 after 59 usecs
[ 0.559985] calling init_timer_list_procfs+0x0/0x2f @ 1
[ 0.559991] initcall init_timer_list_procfs+0x0/0x2f returned 0 after 2 usecs
[ 0.559995] calling alarmtimer_init+0x0/0x114 @ 1
[ 0.560059] probe of alarmtimer returned 1 after 16 usecs
[ 0.560065] initcall alarmtimer_init+0x0/0x114 returned 0 after 64 usecs
[ 0.560069] calling init_posix_timers+0x0/0x29 @ 1
[ 0.560102] initcall init_posix_timers+0x0/0x29 returned 0 after 27 usecs
[ 0.560106] calling clockevents_init_sysfs+0x0/0x9e @ 1
[ 0.560265] initcall clockevents_init_sysfs+0x0/0x9e returned 0 after 150 usecs
[ 0.560270] calling proc_dma_init+0x0/0x21 @ 1
[ 0.560276] initcall proc_dma_init+0x0/0x21 returned 0 after 2 usecs
[ 0.560280] calling proc_modules_init+0x0/0x1f @ 1
[ 0.560285] initcall proc_modules_init+0x0/0x1f returned 0 after 1 usecs
[ 0.560289] calling kallsyms_init+0x0/0x22 @ 1
[ 0.560294] initcall kallsyms_init+0x0/0x22 returned 0 after 1 usecs
[ 0.560299] calling pid_namespaces_init+0x0/0x2c @ 1
[ 0.560307] initcall pid_namespaces_init+0x0/0x2c returned 0 after 4 usecs
[ 0.560311] calling audit_watch_init+0x0/0x38 @ 1
[ 0.560316] initcall audit_watch_init+0x0/0x38 returned 0 after 1 usecs
[ 0.560321] calling audit_fsnotify_init+0x0/0x38 @ 1
[ 0.560325] initcall audit_fsnotify_init+0x0/0x38 returned 0 after 0 usecs
[ 0.560329] calling audit_tree_init+0x0/0x40 @ 1
[ 0.560334] initcall audit_tree_init+0x0/0x40 returned 0 after 1 usecs
[ 0.560338] calling init_kprobes+0x0/0x172 @ 1
[ 0.560486] initcall init_kprobes+0x0/0x172 returned 0 after 140 usecs
[ 0.560490] calling seccomp_sysctl_init+0x0/0x31 @ 1
[ 0.560504] initcall seccomp_sysctl_init+0x0/0x31 returned 0 after 10 usecs
[ 0.560509] calling utsname_sysctl_init+0x0/0x16 @ 1
[ 0.560521] initcall utsname_sysctl_init+0x0/0x16 returned 0 after 8 usecs
[ 0.560526] calling init_tracepoints+0x0/0x2b @ 1
[ 0.560530] initcall init_tracepoints+0x0/0x2b returned 0 after 0 usecs
[ 0.560533] calling stack_trace_init+0x0/0x9e @ 1
[ 0.560558] initcall stack_trace_init+0x0/0x9e returned 0 after 20 usecs
[ 0.560561] calling init_mmio_trace+0x0/0xf @ 1
[ 0.560567] initcall init_mmio_trace+0x0/0xf returned 0 after 3 usecs
[ 0.560570] calling init_blk_tracer+0x0/0x4d @ 1
[ 0.560585] initcall init_blk_tracer+0x0/0x4d returned 0 after 11 usecs
[ 0.560589] calling perf_event_sysfs_init+0x0/0x78 @ 1
[ 0.560834] initcall perf_event_sysfs_init+0x0/0x78 returned 0 after 236 usecs
[ 0.560838] calling init_uprobes+0x0/0x56 @ 1
[ 0.560845] initcall init_uprobes+0x0/0x56 returned 0 after 4 usecs
[ 0.560849] calling padata_driver_init+0x0/0x35 @ 1
[ 0.560854] initcall padata_driver_init+0x0/0x35 returned 0 after 1 usecs
[ 0.560858] calling system_trusted_keyring_init+0x0/0x55 @ 1
[ 0.560859] Initialise system trusted keyrings
[ 0.560871] initcall system_trusted_keyring_init+0x0/0x55 returned 0 after 9 usecs
[ 0.560875] calling kswapd_init+0x0/0x3b @ 1
[ 0.560990] initcall kswapd_init+0x0/0x3b returned 0 after 99 usecs
[ 0.560999] calling extfrag_debug_init+0x0/0x71 @ 1
[ 0.561015] initcall extfrag_debug_init+0x0/0x71 returned 0 after 12 usecs
[ 0.561020] calling mm_compute_batch_init+0x0/0x3e @ 1
[ 0.561023] initcall mm_compute_batch_init+0x0/0x3e returned 0 after 0 usecs
[ 0.561028] calling slab_proc_init+0x0/0x22 @ 1
[ 0.561038] initcall slab_proc_init+0x0/0x22 returned 0 after 6 usecs
[ 0.561042] calling workingset_init+0x0/0x88 @ 1
[ 0.561045] workingset: timestamp_bits=14 max_order=20 bucket_order=6
[ 0.561054] initcall workingset_init+0x0/0x88 returned 0 after 8 usecs
[ 0.561059] calling proc_vmalloc_init+0x0/0x26 @ 1
[ 0.561064] initcall proc_vmalloc_init+0x0/0x26 returned 0 after 2 usecs
[ 0.561069] calling procswaps_init+0x0/0x1f @ 1
[ 0.561075] initcall procswaps_init+0x0/0x1f returned 0 after 1 usecs
[ 0.561080] calling init_frontswap+0x0/0x82 @ 1
[ 0.561095] initcall init_frontswap+0x0/0x82 returned 0 after 11 usecs
[ 0.561098] calling slab_sysfs_init+0x0/0xd0 @ 1
[ 0.564182] initcall slab_sysfs_init+0x0/0xd0 returned 0 after 3005 usecs
[ 0.564187] calling init_cleancache+0x0/0x82 @ 1
[ 0.564203] initcall init_cleancache+0x0/0x82 returned 0 after 13 usecs
[ 0.564206] calling init_zbud+0x0/0x20 @ 1
[ 0.564208] zbud: loaded
[ 0.564211] initcall init_zbud+0x0/0x20 returned 0 after 1 usecs
[ 0.564214] calling zs_init+0x0/0x6d @ 1
[ 0.564246] initcall zs_init+0x0/0x6d returned 0 after 27 usecs
[ 0.564249] calling init_z3fold+0x0/0x16 @ 1
[ 0.564252] initcall init_z3fold+0x0/0x16 returned 0 after 0 usecs
[ 0.564255] calling fcntl_init+0x0/0x29 @ 1
[ 0.564264] initcall fcntl_init+0x0/0x29 returned 0 after 6 usecs
[ 0.564268] calling proc_filesystems_init+0x0/0x21 @ 1
[ 0.564275] initcall proc_filesystems_init+0x0/0x21 returned 0 after 3 usecs
[ 0.564279] calling start_dirtytime_writeback+0x0/0x2c @ 1
[ 0.564285] initcall start_dirtytime_writeback+0x0/0x2c returned 0 after 2 usecs
[ 0.564288] calling blkdev_init+0x0/0x20 @ 1
[ 0.564305] initcall blkdev_init+0x0/0x20 returned 0 after 13 usecs
[ 0.564309] calling dio_init+0x0/0x2c @ 1
[ 0.564362] initcall dio_init+0x0/0x2c returned 0 after 48 usecs
[ 0.564366] calling dnotify_init+0x0/0x6f @ 1
[ 0.564378] initcall dnotify_init+0x0/0x6f returned 0 after 9 usecs
[ 0.564382] calling fanotify_user_setup+0x0/0x6c @ 1
[ 0.564442] initcall fanotify_user_setup+0x0/0x6c returned 0 after 55 usecs
[ 0.564446] calling userfaultfd_init+0x0/0x2c @ 1
[ 0.564492] initcall userfaultfd_init+0x0/0x2c returned 0 after 41 usecs
[ 0.564495] calling aio_setup+0x0/0x6e @ 1
[ 0.564518] initcall aio_setup+0x0/0x6e returned 0 after 18 usecs
[ 0.564522] calling mbcache_init+0x0/0x31 @ 1
[ 0.564573] initcall mbcache_init+0x0/0x31 returned 0 after 47 usecs
[ 0.564578] calling init_v2_quota_format+0x0/0x22 @ 1
[ 0.564581] initcall init_v2_quota_format+0x0/0x22 returned 0 after 0 usecs
[ 0.564586] calling init_devpts_fs+0x0/0x28 @ 1
[ 0.564606] initcall init_devpts_fs+0x0/0x28 returned 0 after 16 usecs
[ 0.564612] calling ext4_init_fs+0x0/0x166 @ 1
[ 0.564823] initcall ext4_init_fs+0x0/0x166 returned 0 after 202 usecs
[ 0.564828] calling journal_init+0x0/0xfc @ 1
[ 0.564948] initcall journal_init+0x0/0xfc returned 0 after 111 usecs
[ 0.564953] calling init_nls_cp437+0x0/0x16 @ 1
[ 0.564957] initcall init_nls_cp437+0x0/0x16 returned 0 after 0 usecs
[ 0.564961] calling init_nls_ascii+0x0/0x16 @ 1
[ 0.564965] initcall init_nls_ascii+0x0/0x16 returned 0 after 0 usecs
[ 0.564970] calling init_autofs_fs+0x0/0x29 @ 1
[ 0.565146] initcall init_autofs_fs+0x0/0x29 returned 0 after 158 usecs
[ 0.565154] calling init_pstore_fs+0x0/0x47 @ 1
[ 0.565156] pstore: using deflate compression
[ 0.565214] initcall init_pstore_fs+0x0/0x47 returned 0 after 54 usecs
[ 0.565217] calling ipc_init+0x0/0x27 @ 1
[ 0.565238] initcall ipc_init+0x0/0x27 returned 0 after 17 usecs
[ 0.565241] calling ipc_sysctl_init+0x0/0x16 @ 1
[ 0.565259] initcall ipc_sysctl_init+0x0/0x16 returned 0 after 14 usecs
[ 0.565262] calling init_mqueue_fs+0x0/0xee @ 1
[ 0.565379] initcall init_mqueue_fs+0x0/0xee returned 0 after 110 usecs
[ 0.565383] calling key_proc_init+0x0/0x5c @ 1
[ 0.565391] initcall key_proc_init+0x0/0x5c returned 0 after 4 usecs
[ 0.565394] calling selinux_nf_ip_init+0x0/0x49 @ 1
[ 0.565397] initcall selinux_nf_ip_init+0x0/0x49 returned 0 after 0 usecs
[ 0.565400] calling init_sel_fs+0x0/0xfa @ 1
[ 0.565403] initcall init_sel_fs+0x0/0xfa returned 0 after 0 usecs
[ 0.565406] calling selnl_init+0x0/0x6e @ 1
[ 0.565422] initcall selnl_init+0x0/0x6e returned 0 after 12 usecs
[ 0.565425] calling sel_netif_init+0x0/0x36 @ 1
[ 0.565428] initcall sel_netif_init+0x0/0x36 returned 0 after 0 usecs
[ 0.565431] calling sel_netnode_init+0x0/0x30 @ 1
[ 0.565434] initcall sel_netnode_init+0x0/0x30 returned 0 after 0 usecs
[ 0.565437] calling sel_netport_init+0x0/0x30 @ 1
[ 0.565440] initcall sel_netport_init+0x0/0x30 returned 0 after 0 usecs
[ 0.565443] calling aurule_init+0x0/0x2a @ 1
[ 0.565447] initcall aurule_init+0x0/0x2a returned 0 after 1 usecs
[ 0.565450] calling crypto_algapi_init+0x0/0x11 @ 1
[ 0.565455] initcall crypto_algapi_init+0x0/0x11 returned 0 after 2 usecs
[ 0.565458] calling seqiv_module_init+0x0/0x14 @ 1
[ 0.565462] initcall seqiv_module_init+0x0/0x14 returned 0 after 0 usecs
[ 0.565467] calling dh_init+0x0/0x20 @ 1
[ 0.565564] alg: self-tests disabled
[ 0.565582] initcall dh_init+0x0/0x20 returned 0 after 104 usecs
[ 0.565588] calling rsa_init+0x0/0x40 @ 1
[ 0.565657] initcall rsa_init+0x0/0x40 returned 0 after 62 usecs
[ 0.565662] calling hmac_module_init+0x0/0x14 @ 1
[ 0.565665] initcall hmac_module_init+0x0/0x14 returned 0 after 0 usecs
[ 0.565668] calling crypto_null_mod_init+0x0/0x46 @ 1
[ 0.566005] initcall crypto_null_mod_init+0x0/0x46 returned 0 after 321 usecs
[ 0.566010] calling md5_mod_init+0x0/0x14 @ 1
[ 0.566073] initcall md5_mod_init+0x0/0x14 returned 0 after 57 usecs
[ 0.566077] calling sha1_generic_mod_init+0x0/0x14 @ 1
[ 0.566205] initcall sha1_generic_mod_init+0x0/0x14 returned 0 after 121 usecs
[ 0.566209] calling sha256_generic_mod_init+0x0/0x19 @ 1
[ 0.566330] initcall sha256_generic_mod_init+0x0/0x19 returned 0 after 113 usecs
[ 0.566334] calling crypto_ecb_module_init+0x0/0x14 @ 1
[ 0.566337] initcall crypto_ecb_module_init+0x0/0x14 returned 0 after 0 usecs
[ 0.566340] calling crypto_cbc_module_init+0x0/0x14 @ 1
[ 0.566344] initcall crypto_cbc_module_init+0x0/0x14 returned 0 after 0 usecs
[ 0.566347] calling crypto_module_init+0x0/0x14 @ 1
[ 0.566350] initcall crypto_module_init+0x0/0x14 returned 0 after 0 usecs
[ 0.566353] calling crypto_module_init+0x0/0x14 @ 1
[ 0.566356] initcall crypto_module_init+0x0/0x14 returned 0 after 0 usecs
[ 0.566359] calling crypto_ctr_module_init+0x0/0x38 @ 1
[ 0.566363] initcall crypto_ctr_module_init+0x0/0x38 returned 0 after 0 usecs
[ 0.566366] calling crypto_gcm_module_init+0x0/0xa7 @ 1
[ 0.566370] initcall crypto_gcm_module_init+0x0/0xa7 returned 0 after 1 usecs
[ 0.566373] calling aes_init+0x0/0x14 @ 1
[ 0.566436] initcall aes_init+0x0/0x14 returned 0 after 57 usecs
[ 0.566440] calling deflate_mod_init+0x0/0x3d @ 1
[ 0.566610] initcall deflate_mod_init+0x0/0x3d returned 0 after 162 usecs
[ 0.566614] calling crc32c_mod_init+0x0/0x14 @ 1
[ 0.566679] initcall crc32c_mod_init+0x0/0x14 returned 0 after 59 usecs
[ 0.566682] calling crct10dif_mod_init+0x0/0x14 @ 1
[ 0.566745] initcall crct10dif_mod_init+0x0/0x14 returned 0 after 57 usecs
[ 0.566748] calling lzo_mod_init+0x0/0x38 @ 1
[ 0.566864] initcall lzo_mod_init+0x0/0x38 returned 0 after 108 usecs
[ 0.566867] calling drbg_init+0x0/0x71 @ 1
[ 0.568545] initcall drbg_init+0x0/0x71 returned 0 after 1622 usecs
[ 0.568555] calling jent_mod_init+0x0/0x31 @ 1
[ 0.569544] initcall jent_mod_init+0x0/0x31 returned 0 after 949 usecs
[ 0.569552] calling ghash_mod_init+0x0/0x14 @ 1
[ 0.569621] initcall ghash_mod_init+0x0/0x14 returned 0 after 63 usecs
[ 0.569625] calling af_alg_init+0x0/0x3a @ 1
[ 0.569628] NET: Registered protocol family 38
[ 0.569631] initcall af_alg_init+0x0/0x3a returned 0 after 3 usecs
[ 0.569635] calling algif_hash_init+0x0/0x14 @ 1
[ 0.569639] initcall algif_hash_init+0x0/0x14 returned 0 after 1 usecs
[ 0.569642] calling algif_skcipher_init+0x0/0x14 @ 1
[ 0.569645] initcall algif_skcipher_init+0x0/0x14 returned 0 after 0 usecs
[ 0.569648] calling rng_init+0x0/0x14 @ 1
[ 0.569652] initcall rng_init+0x0/0x14 returned 0 after 0 usecs
[ 0.569655] calling algif_aead_init+0x0/0x14 @ 1
[ 0.569658] initcall algif_aead_init+0x0/0x14 returned 0 after 0 usecs
[ 0.569662] calling asymmetric_key_init+0x0/0x14 @ 1
[ 0.569664] Key type asymmetric registered
[ 0.569667] initcall asymmetric_key_init+0x0/0x14 returned 0 after 2 usecs
[ 0.569670] calling x509_key_init+0x0/0x14 @ 1
[ 0.569673] Asymmetric key parser 'x509' registered
[ 0.569676] initcall x509_key_init+0x0/0x14 returned 0 after 2 usecs
[ 0.569679] calling proc_genhd_init+0x0/0x3a @ 1
[ 0.569692] initcall proc_genhd_init+0x0/0x3a returned 0 after 9 usecs
[ 0.569696] calling init_emergency_pool+0x0/0x9a @ 1
[ 0.569717] bounce: pool size: 64 pages
[ 0.569726] initcall init_emergency_pool+0x0/0x9a returned 0 after 26 usecs
[ 0.569729] calling bsg_init+0x0/0x12c @ 1
[ 0.569757] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.569760] initcall bsg_init+0x0/0x12c returned 0 after 27 usecs
[ 0.569764] calling throtl_init+0x0/0x3c @ 1
[ 0.569845] initcall throtl_init+0x0/0x3c returned 0 after 74 usecs
[ 0.569848] calling noop_init+0x0/0x14 @ 1
[ 0.569851] io scheduler noop registered
[ 0.569854] initcall noop_init+0x0/0x14 returned 0 after 2 usecs
[ 0.569858] calling deadline_init+0x0/0x14 @ 1
[ 0.569859] io scheduler deadline registered
[ 0.569862] initcall deadline_init+0x0/0x14 returned 0 after 1 usecs
[ 0.569866] calling cfq_init+0x0/0x6e @ 1
[ 0.569994] io scheduler cfq registered (default)
[ 0.569999] initcall cfq_init+0x0/0x6e returned 0 after 126 usecs
[ 0.570003] calling deadline_init+0x0/0x14 @ 1
[ 0.570005] io scheduler mq-deadline registered
[ 0.570008] initcall deadline_init+0x0/0x14 returned 0 after 1 usecs
[ 0.570011] calling kyber_init+0x0/0x14 @ 1
[ 0.570013] io scheduler kyber registered
[ 0.570016] initcall kyber_init+0x0/0x14 returned 0 after 1 usecs
[ 0.570020] calling crc_t10dif_mod_init+0x0/0x35 @ 1
[ 0.570027] initcall crc_t10dif_mod_init+0x0/0x35 returned 0 after 4 usecs
[ 0.570031] calling libcrc32c_mod_init+0x0/0x25 @ 1
[ 0.570035] initcall libcrc32c_mod_init+0x0/0x25 returned 0 after 1 usecs
[ 0.570039] calling percpu_counter_startup+0x0/0x50 @ 1
[ 0.570084] initcall percpu_counter_startup+0x0/0x50 returned 0 after 39 usecs
[ 0.570088] calling audit_classes_init+0x0/0x4f @ 1
[ 0.570095] initcall audit_classes_init+0x0/0x4f returned 0 after 3 usecs
[ 0.570099] calling sg_pool_init+0x0/0xab @ 1
[ 0.570171] initcall sg_pool_init+0x0/0xab returned 0 after 66 usecs
[ 0.570175] calling phy_core_init+0x0/0x44 @ 1
[ 0.570185] initcall phy_core_init+0x0/0x44 returned 0 after 6 usecs
[ 0.570189] calling pci_proc_init+0x0/0x63 @ 1
[ 0.570252] initcall pci_proc_init+0x0/0x63 returned 0 after 57 usecs
[ 0.570256] calling pcie_portdrv_init+0x0/0x34 @ 1
[ 0.571008] probe of 0000:00:15.0 returned 1 after 734 usecs
[ 0.571521] probe of 0000:00:15.1 returned 1 after 500 usecs
[ 0.571546] initcall pcie_portdrv_init+0x0/0x34 returned 0 after 1255 usecs
[ 0.571551] calling aer_service_init+0x0/0x33 @ 1
[ 0.571564] initcall aer_service_init+0x0/0x33 returned 0 after 9 usecs
[ 0.571569] calling pcie_pme_service_init+0x0/0x14 @ 1
[ 0.571684] pcieport 0000:00:15.0: Signaling PME with IRQ 24
[ 0.571696] probe of 0000:00:15.0:pcie001 returned 1 after 121 usecs
[ 0.571742] pcieport 0000:00:15.1: Signaling PME with IRQ 25
[ 0.571753] probe of 0000:00:15.1:pcie001 returned 1 after 44 usecs
[ 0.571765] initcall pcie_pme_service_init+0x0/0x14 returned 0 after 187 usecs
[ 0.571769] calling dpc_service_init+0x0/0x14 @ 1
[ 0.571781] initcall dpc_service_init+0x0/0x14 returned 0 after 8 usecs
[ 0.571786] calling pci_stub_init+0x0/0x133 @ 1
[ 0.571807] initcall pci_stub_init+0x0/0x133 returned 0 after 17 usecs
[ 0.571813] calling acpi_button_driver_init+0x0/0x20 @ 1
[ 0.571930] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.571964] ACPI: Power Button [PWRB]
[ 0.571980] probe of PNP0C0C:00 returned 1 after 127 usecs
[ 0.572053] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.572069] ACPI: Power Button [PWRF]
[ 0.572182] probe of LNXPWRBN:00 returned 1 after 193 usecs
[ 0.572195] initcall acpi_button_driver_init+0x0/0x20 returned 0 after 368 usecs
[ 0.572201] calling acpi_fan_driver_init+0x0/0x16 @ 1
[ 0.572222] initcall acpi_fan_driver_init+0x0/0x16 returned 0 after 16 usecs
[ 0.572225] calling acpi_processor_driver_init+0x0/0x8d @ 1
[ 0.572481] probe of cpu0 returned 1 after 248 usecs
[ 0.572723] probe of cpu1 returned 1 after 237 usecs
[ 0.572738] initcall acpi_processor_driver_init+0x0/0x8d returned 0 after 496 usecs
[ 0.572742] calling acpi_thermal_init+0x0/0x78 @ 1
[ 0.573674] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.573677] ACPI: Thermal Zone [TZ00] (47 C)
[ 0.573689] probe of LNXTHERM:00 returned 1 after 832 usecs
[ 0.573718] initcall acpi_thermal_init+0x0/0x78 returned 0 after 948 usecs
[ 0.573722] calling acpi_hed_driver_init+0x0/0x14 @ 1
[ 0.573747] initcall acpi_hed_driver_init+0x0/0x14 returned 0 after 21 usecs
[ 0.573751] calling gpio_clk_driver_init+0x0/0x16 @ 1
[ 0.573766] initcall gpio_clk_driver_init+0x0/0x16 returned 0 after 12 usecs
[ 0.573770] calling plt_clk_driver_init+0x0/0x16 @ 1
[ 0.573782] initcall plt_clk_driver_init+0x0/0x16 returned 0 after 9 usecs
[ 0.573786] calling dw_pci_driver_init+0x0/0x1b @ 1
[ 0.573819] initcall dw_pci_driver_init+0x0/0x1b returned 0 after 29 usecs
[ 0.573822] calling n_null_init+0x0/0x21 @ 1
[ 0.573825] initcall n_null_init+0x0/0x21 returned 0 after 0 usecs
[ 0.573828] calling pty_init+0x0/0x1d6 @ 1
[ 0.573934] initcall pty_init+0x0/0x1d6 returned 0 after 100 usecs
[ 0.573938] calling sysrq_init+0x0/0x68 @ 1
[ 0.573945] initcall sysrq_init+0x0/0x68 returned 0 after 4 usecs
[ 0.573949] initcall serial8250_init blacklisted
[ 0.573953] calling serial_pci_driver_init+0x0/0x1b @ 1
[ 0.574032] initcall serial_pci_driver_init+0x0/0x1b returned 0 after 73 usecs
[ 0.574036] calling dw8250_platform_driver_init+0x0/0x16 @ 1
[ 0.574052] initcall dw8250_platform_driver_init+0x0/0x16 returned 0 after 12 usecs
[ 0.574056] calling lpss8250_pci_driver_init+0x0/0x1b @ 1
[ 0.574076] initcall lpss8250_pci_driver_init+0x0/0x1b returned 0 after 16 usecs
[ 0.574080] calling mid8250_pci_driver_init+0x0/0x1b @ 1
[ 0.574099] initcall mid8250_pci_driver_init+0x0/0x1b returned 0 after 15 usecs
[ 0.574102] calling raw_init+0x0/0x12d @ 1
[ 0.574371] initcall raw_init+0x0/0x12d returned 0 after 250 usecs
[ 0.574380] calling hpet_init+0x0/0x5c @ 1
[ 0.574685] initcall hpet_init+0x0/0x5c returned 0 after 293 usecs
[ 0.574689] calling nvram_init+0x0/0x75 @ 1
[ 0.574827] Non-volatile memory driver v1.3
[ 0.574832] initcall nvram_init+0x0/0x75 returned 0 after 135 usecs
[ 0.574835] calling hwrng_modinit+0x0/0x71 @ 1
[ 0.574969] initcall hwrng_modinit+0x0/0x71 returned 0 after 126 usecs
[ 0.574972] calling mod_init+0x0/0x94 @ 1
[ 0.574991] initcall mod_init+0x0/0x94 returned -19 after 15 usecs
[ 0.574994] calling agp_init+0x0/0x29 @ 1
[ 0.574996] Linux agpgart interface v0.103
[ 0.574999] initcall agp_init+0x0/0x29 returned 0 after 1 usecs
[ 0.575002] calling agp_amd64_mod_init+0x0/0xf @ 1
[ 0.575093] probe of 0000:00:00.0 returned 0 after 28 usecs
[ 0.575112] probe of 0000:00:01.0 returned 0 after 14 usecs
[ 0.575295] probe of 0000:00:01.1 returned 0 after 179 usecs
[ 0.575384] probe of 0000:00:11.0 returned 0 after 84 usecs
[ 0.575397] probe of 0000:00:12.0 returned 0 after 9 usecs
[ 0.575414] probe of 0000:00:12.2 returned 0 after 14 usecs
[ 0.575427] probe of 0000:00:13.0 returned 0 after 9 usecs
[ 0.575445] probe of 0000:00:13.2 returned 0 after 14 usecs
[ 0.575457] probe of 0000:00:14.0 returned 0 after 9 usecs
[ 0.575473] probe of 0000:00:14.2 returned 0 after 12 usecs
[ 0.575486] probe of 0000:00:14.3 returned 0 after 9 usecs
[ 0.575499] probe of 0000:00:14.4 returned 0 after 10 usecs
[ 0.575512] probe of 0000:00:14.5 returned 0 after 9 usecs
[ 0.575526] probe of 0000:00:18.0 returned 0 after 9 usecs
[ 0.575538] probe of 0000:00:18.1 returned 0 after 8 usecs
[ 0.575549] probe of 0000:00:18.2 returned 0 after 8 usecs
[ 0.575563] probe of 0000:00:18.3 returned 0 after 10 usecs
[ 0.575575] probe of 0000:00:18.4 returned 0 after 8 usecs
[ 0.575586] probe of 0000:00:18.5 returned 0 after 8 usecs
[ 0.575598] probe of 0000:00:18.6 returned 0 after 8 usecs
[ 0.575610] probe of 0000:00:18.7 returned 0 after 8 usecs
[ 0.575704] probe of 0000:03:00.0 returned 0 after 91 usecs
[ 0.575724] initcall agp_amd64_mod_init+0x0/0xf returned -19 after 701 usecs
[ 0.575728] calling agp_intel_init+0x0/0x2a @ 1
[ 0.575757] initcall agp_intel_init+0x0/0x2a returned 0 after 25 usecs
[ 0.575761] calling agp_sis_init+0x0/0x2a @ 1
[ 0.575783] initcall agp_sis_init+0x0/0x2a returned 0 after 18 usecs
[ 0.575787] calling agp_via_init+0x0/0x2a @ 1
[ 0.575810] initcall agp_via_init+0x0/0x2a returned 0 after 19 usecs
[ 0.575814] calling drm_kms_helper_init+0x0/0x18 @ 1
[ 0.575829] initcall drm_kms_helper_init+0x0/0x18 returned 0 after 11 usecs
[ 0.575833] calling drm_core_init+0x0/0xd1 @ 1
[ 0.575861] initcall drm_core_init+0x0/0xd1 returned 0 after 24 usecs
[ 0.575865] calling ttm_init+0x0/0x5f @ 1
[ 0.575892] initcall ttm_init+0x0/0x5f returned 0 after 23 usecs
[ 0.575896] calling radeon_init+0x0/0x9b @ 1
[ 0.575898] [drm] radeon kernel modesetting enabled.
[ 0.576654] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x1002:0x9802 0x00).
[ 0.576725] ATOM BIOS: AMD
[ 0.576808] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
[ 0.576812] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF
[ 0.576819] [drm] Detected VRAM RAM=384M, BAR=256M
[ 0.576821] [drm] RAM width 32bits DDR
[ 0.577020] [TTM] Zone kernel: Available graphics memory: 418632 kiB
[ 0.577024] [TTM] Zone highmem: Available graphics memory: 1855936 kiB
[ 0.577026] [TTM] Initializing pool allocator
[ 0.577034] [TTM] Initializing DMA pool allocator
[ 0.577076] [drm] radeon: 384M of VRAM memory ready
[ 0.577078] [drm] radeon: 1024M of GTT memory ready.
[ 0.577101] [drm] Loading PALM Microcode
[ 0.577109] [drm] Internal thermal controller without fan control
[ 0.577237] [drm] Found smc ucode version: 0x00010601
[ 0.577315] [drm] radeon: dpm initialized
[ 0.577351] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 0.590277] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
[ 0.590466] radeon 0000:00:01.0: WB enabled
[ 0.590473] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0x(ptrval)
[ 0.590476] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0x(ptrval)
[ 0.591353] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x(ptrval)
[ 0.591357] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.591358] [drm] Driver supports precise vblank timestamp query.
[ 0.591361] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
[ 0.591441] radeon 0000:00:01.0: radeon: using MSI.
[ 0.591478] [drm] radeon: irq initialized.
[ 0.608097] [drm] ring test on 0 succeeded in 1 usecs
[ 0.608105] [drm] ring test on 3 succeeded in 3 usecs
[ 0.654250] [drm] ring test on 5 succeeded in 1 usecs
[ 0.674274] [drm] UVD initialized successfully.
[ 0.674504] [drm] ib test on ring 0 succeeded in 0 usecs
[ 0.674561] [drm] ib test on ring 3 succeeded in 0 usecs
[ 1.198446] [drm] ib test on ring 5 succeeded
[ 1.219188] [drm] Radeon Display Connectors
[ 1.219189] [drm] Connector 0:
[ 1.219190] [drm] HDMI-A-1
[ 1.219192] [drm] HPD1
[ 1.219194] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 1.219195] [drm] Encoders:
[ 1.219197] [drm] DFP1: INTERNAL_UNIPHY
[ 1.219199] [drm] Connector 1:
[ 1.219200] [drm] HDMI-A-2
[ 1.219201] [drm] HPD2
[ 1.219203] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 1.219204] [drm] Encoders:
[ 1.219205] [drm] DFP2: INTERNAL_UNIPHY
[ 1.219206] [drm] Connector 2:
[ 1.219208] [drm] VGA-1
[ 1.219210] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[ 1.219211] [drm] Encoders:
[ 1.219213] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 1.260307] [drm] fb mappable at 0xE0366000
[ 1.260309] [drm] vram apper at 0xE0000000
[ 1.260310] [drm] size 5242880
[ 1.260311] [drm] fb depth is 24
[ 1.260312] [drm] pitch is 5120
[ 1.260611] fbcon: radeondrmfb (fb0) is primary device
[ 1.303446] Console: switching to colour frame buffer device 160x64
[ 1.314222] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 1.314350] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0
[ 1.314377] probe of 0000:00:01.0 returned 1 after 738458 usecs
[ 1.314516] initcall radeon_init+0x0/0x9b returned 0 after 721299 usecs
[ 1.314523] calling cn_proc_init+0x0/0x35 @ 1
[ 1.314529] initcall cn_proc_init+0x0/0x35 returned 0 after 2 usecs
[ 1.314534] calling topology_sysfs_init+0x0/0x40 @ 1
[ 1.314558] initcall topology_sysfs_init+0x0/0x40 returned 0 after 20 usecs
[ 1.314563] calling cacheinfo_sysfs_init+0x0/0x2a @ 1
[ 1.315159] initcall cacheinfo_sysfs_init+0x0/0x2a returned 173 after 562 usecs
[ 1.315169] calling init_sd+0x0/0x136 @ 1
[ 1.315247] initcall init_sd+0x0/0x136 returned 0 after 71 usecs
[ 1.315251] calling init_sr+0x0/0x42 @ 1
[ 1.315264] initcall init_sr+0x0/0x42 returned 0 after 8 usecs
[ 1.315268] calling init_sg+0x0/0x18d @ 1
[ 1.315295] initcall init_sg+0x0/0x18d returned 0 after 22 usecs
[ 1.315299] calling ahci_pci_driver_init+0x0/0x1b @ 1
[ 1.315348] ahci 0000:00:11.0: version 3.0
[ 1.316112] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 1.316118] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part
[ 1.318414] scsi host0: ahci
[ 1.318920] scsi host1: ahci
[ 1.319243] scsi host2: ahci
[ 1.319610] scsi host3: ahci
[ 1.319923] scsi host4: ahci
[ 1.320148] scsi host5: ahci
[ 1.320307] ata1: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b100 irq 19
[ 1.320311] ata2: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b180 irq 19
[ 1.320314] ata3: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b200 irq 19
[ 1.320318] ata4: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b280 irq 19
[ 1.320321] ata5: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b300 irq 19
[ 1.320324] ata6: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b380 irq 19
[ 1.320356] probe of 0000:00:11.0 returned 1 after 5030 usecs
[ 1.320446] initcall ahci_pci_driver_init+0x0/0x1b returned 0 after 5015 usecs
[ 1.320453] calling net_olddevs_init+0x0/0x53 @ 1
[ 1.320463] initcall net_olddevs_init+0x0/0x53 returned 0 after 7 usecs
[ 1.320468] calling fixed_mdio_bus_init+0x0/0xd8 @ 1
[ 1.320550] libphy: Fixed MDIO Bus: probed
[ 1.320555] initcall fixed_mdio_bus_init+0x0/0xd8 returned 0 after 80 usecs
[ 1.320560] calling cdrom_init+0x0/0x1d @ 1
[ 1.320576] initcall cdrom_init+0x0/0x1d returned 0 after 12 usecs
[ 1.320580] calling usb_serial_init+0x0/0x143 @ 1
[ 1.320635] usbcore: registered new interface driver usbserial_generic
[ 1.320648] usbserial: USB Serial support registered for generic
[ 1.320653] initcall usb_serial_init+0x0/0x143 returned 0 after 67 usecs
[ 1.320658] calling i8042_init+0x0/0x41a @ 1
[ 1.320695] probe of 00:01 returned 1 after 22 usecs
[ 1.320710] probe of 00:03 returned 1 after 9 usecs
[ 1.320734] probe of 00:02 returned 1 after 9 usecs
[ 1.320748] probe of 00:04 returned 1 after 9 usecs
[ 1.320757] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.324737] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.324749] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.324866] probe of i8042 returned 1 after 3882 usecs
[ 1.324878] initcall i8042_init+0x0/0x41a returned 0 after 4116 usecs
[ 1.324883] calling serport_init+0x0/0x30 @ 1
[ 1.324887] initcall serport_init+0x0/0x30 returned 0 after 0 usecs
[ 1.324892] calling input_leds_init+0x0/0x14 @ 1
[ 1.324898] initcall input_leds_init+0x0/0x14 returned 0 after 2 usecs
[ 1.324902] calling mousedev_init+0x0/0x56 @ 1
[ 1.325183] mousedev: PS/2 mouse device common for all mice
[ 1.325196] initcall mousedev_init+0x0/0x56 returned 0 after 277 usecs
[ 1.325203] calling evdev_init+0x0/0x14 @ 1
[ 1.325526] initcall evdev_init+0x0/0x14 returned 0 after 310 usecs
[ 1.325531] calling atkbd_init+0x0/0x25 @ 1
[ 1.325579] initcall atkbd_init+0x0/0x25 returned 0 after 42 usecs
[ 1.325583] calling psmouse_init+0x0/0x7e @ 1
[ 1.325744] initcall psmouse_init+0x0/0x7e returned 0 after 152 usecs
[ 1.325749] calling cmos_init+0x0/0x65 @ 1
[ 1.325876] rtc_cmos 00:00: RTC can wake from S4
[ 1.326225] rtc_cmos 00:00: registered as rtc0
[ 1.326270] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
[ 1.326278] probe of 00:00 returned 1 after 438 usecs
[ 1.326294] initcall cmos_init+0x0/0x65 returned 0 after 527 usecs
[ 1.326299] calling sensors_w83627ehf_init+0x0/0x16f @ 1
[ 1.326402] w83627ehf: Found NCT6775F chip at 0x290
[ 1.326958] w83627ehf w83627ehf.656: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 1.326993] probe of w83627ehf.656 returned 1 after 533 usecs
[ 1.327000] initcall sensors_w83627ehf_init+0x0/0x16f returned 0 after 680 usecs
[ 1.327023] calling dm_init+0x0/0x3c @ 1
[ 1.327110] device-mapper: uevent: version 1.0.3
[ 1.327325] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[ 1.327329] initcall dm_init+0x0/0x3c returned 0 after 295 usecs
[ 1.327334] calling dm_crypt_init+0x0/0x2d @ 1
[ 1.327339] initcall dm_crypt_init+0x0/0x2d returned 0 after 0 usecs
[ 1.327344] calling cpufreq_gov_powersave_init+0x0/0x14 @ 1
[ 1.327350] initcall cpufreq_gov_powersave_init+0x0/0x14 returned 0 after 1 usecs
[ 1.327355] calling cpufreq_gov_userspace_init+0x0/0x14 @ 1
[ 1.327359] initcall cpufreq_gov_userspace_init+0x0/0x14 returned 0 after 0 usecs
[ 1.327363] calling cpufreq_gov_dbs_init+0x0/0x14 @ 1
[ 1.327367] initcall cpufreq_gov_dbs_init+0x0/0x14 returned 0 after 0 usecs
[ 1.327372] calling intel_pstate_init+0x0/0x340 @ 1
[ 1.327378] initcall intel_pstate_init+0x0/0x340 returned -19 after 1 usecs
[ 1.327382] calling ledtrig_disk_init+0x0/0x48 @ 1
[ 1.327390] initcall ledtrig_disk_init+0x0/0x48 returned 0 after 3 usecs
[ 1.327394] calling ledtrig_panic_init+0x0/0x34 @ 1
[ 1.327400] initcall ledtrig_panic_init+0x0/0x34 returned 0 after 1 usecs
[ 1.327403] calling dmi_sysfs_init+0x0/0xc1 @ 1
[ 1.327507] initcall dmi_sysfs_init+0x0/0xc1 returned 0 after 97 usecs
[ 1.327510] calling hid_init+0x0/0x5d @ 1
[ 1.327535] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.327557] initcall hid_init+0x0/0x5d returned 0 after 42 usecs
[ 1.327560] calling hid_generic_init+0x0/0x1b @ 1
[ 1.327579] initcall hid_generic_init+0x0/0x1b returned 0 after 15 usecs
[ 1.327582] calling ite_driver_init+0x0/0x1b @ 1
[ 1.327597] initcall ite_driver_init+0x0/0x1b returned 0 after 11 usecs
[ 1.327600] calling magicmouse_driver_init+0x0/0x1b @ 1
[ 1.327620] initcall magicmouse_driver_init+0x0/0x1b returned 0 after 16 usecs
[ 1.327623] calling ntrig_driver_init+0x0/0x1b @ 1
[ 1.327646] initcall ntrig_driver_init+0x0/0x1b returned 0 after 19 usecs
[ 1.327649] calling hid_init+0x0/0x58 @ 1
[ 1.327670] usbcore: registered new interface driver usbhid
[ 1.327672] usbhid: USB HID core driver
[ 1.327675] initcall hid_init+0x0/0x58 returned 0 after 22 usecs
[ 1.327678] calling pmc_atom_init+0x0/0x226 @ 1
[ 1.327699] initcall pmc_atom_init+0x0/0x226 returned -19 after 18 usecs
[ 1.327702] calling extcon_class_init+0x0/0x1b @ 1
[ 1.327712] initcall extcon_class_init+0x0/0x1b returned 0 after 6 usecs
[ 1.327715] calling powercap_init+0x0/0x1fa @ 1
[ 1.327798] initcall powercap_init+0x0/0x1fa returned 0 after 77 usecs
[ 1.327805] calling pm_check_save_msr+0x0/0x20 @ 1
[ 1.327810] initcall pm_check_save_msr+0x0/0x20 returned 0 after 1 usecs
[ 1.327814] calling sock_diag_init+0x0/0x34 @ 1
[ 1.327847] initcall sock_diag_init+0x0/0x34 returned 0 after 29 usecs
[ 1.327852] calling blackhole_init+0x0/0x14 @ 1
[ 1.327856] initcall blackhole_init+0x0/0x14 returned 0 after 1 usecs
[ 1.327860] calling fq_codel_module_init+0x0/0x14 @ 1
[ 1.327864] initcall fq_codel_module_init+0x0/0x14 returned 0 after 0 usecs
[ 1.327868] calling init_cgroup_cls+0x0/0x14 @ 1
[ 1.327872] initcall init_cgroup_cls+0x0/0x14 returned 0 after 0 usecs
[ 1.327875] calling xt_init+0x0/0xb2 @ 1
[ 1.327885] initcall xt_init+0x0/0xb2 returned 0 after 5 usecs
[ 1.327888] calling tcpudp_mt_init+0x0/0x19 @ 1
[ 1.327893] initcall tcpudp_mt_init+0x0/0x19 returned 0 after 1 usecs
[ 1.327898] calling gre_offload_init+0x0/0x47 @ 1
[ 1.327902] initcall gre_offload_init+0x0/0x47 returned 0 after 1 usecs
[ 1.327907] calling sysctl_ipv4_init+0x0/0x45 @ 1
[ 1.328029] initcall sysctl_ipv4_init+0x0/0x45 returned 0 after 114 usecs
[ 1.328033] calling ip_tables_init+0x0/0x84 @ 1
[ 1.328048] initcall ip_tables_init+0x0/0x84 returned 0 after 11 usecs
[ 1.328052] calling iptable_filter_init+0x0/0x45 @ 1
[ 1.328330] initcall iptable_filter_init+0x0/0x45 returned 0 after 266 usecs
[ 1.328335] calling reject_tg_init+0x0/0x14 @ 1
[ 1.328338] initcall reject_tg_init+0x0/0x14 returned 0 after 0 usecs
[ 1.328342] calling cubictcp_register+0x0/0x71 @ 1
[ 1.328347] initcall cubictcp_register+0x0/0x71 returned 0 after 1 usecs
[ 1.328351] calling xfrm_user_init+0x0/0x45 @ 1
[ 1.328352] Initializing XFRM netlink socket
[ 1.328361] initcall xfrm_user_init+0x0/0x45 returned 0 after 6 usecs
[ 1.328366] calling inet6_init+0x0/0x32d @ 1
[ 1.328632] NET: Registered protocol family 10
[ 1.329205] Segment Routing with IPv6
[ 1.329248] initcall inet6_init+0x0/0x32d returned 0 after 854 usecs
[ 1.329254] calling mip6_init+0x0/0xac @ 1
[ 1.329256] mip6: Mobile IPv6
[ 1.329260] initcall mip6_init+0x0/0xac returned 0 after 2 usecs
[ 1.329265] calling packet_init+0x0/0x3e @ 1
[ 1.329267] NET: Registered protocol family 17
[ 1.329274] initcall packet_init+0x0/0x3e returned 0 after 5 usecs
[ 1.329281] calling mcheck_init_device+0x0/0x105 @ 1
[ 1.329742] initcall mcheck_init_device+0x0/0x105 returned 0 after 430 usecs
[ 1.329987] calling mcheck_late_init+0x0/0x69 @ 1
[ 1.330078] initcall mcheck_late_init+0x0/0x69 returned 0 after 83 usecs
[ 1.330084] calling severities_debugfs_init+0x0/0x3a @ 1
[ 1.330091] initcall severities_debugfs_init+0x0/0x3a returned 0 after 3 usecs
[ 1.330096] calling threshold_init_device+0x0/0x47 @ 1
[ 1.330101] initcall threshold_init_device+0x0/0x47 returned 0 after 0 usecs
[ 1.330104] calling hpet_insert_resource+0x0/0x24 @ 1
[ 1.330112] initcall hpet_insert_resource+0x0/0x24 returned 0 after 4 usecs
[ 1.330117] calling lapic_insert_resource+0x0/0x4b @ 1
[ 1.330120] initcall lapic_insert_resource+0x0/0x4b returned 0 after 0 usecs
[ 1.330124] calling print_ICs+0x0/0x17b @ 1
[ 1.330128] initcall print_ICs+0x0/0x17b returned 0 after 0 usecs
[ 1.330132] calling print_ipi_mode+0x0/0x2b @ 1
[ 1.330134] Using IPI No-Shortcut mode
[ 1.330137] initcall print_ipi_mode+0x0/0x2b returned 0 after 1 usecs
[ 1.330142] calling pat_memtype_list_init+0x0/0x36 @ 1
[ 1.330150] initcall pat_memtype_list_init+0x0/0x36 returned 0 after 3 usecs
[ 1.330155] calling create_tlb_single_page_flush_ceiling+0x0/0x28 @ 1
[ 1.330162] initcall create_tlb_single_page_flush_ceiling+0x0/0x28 returned 0 after 3 usecs
[ 1.330169] calling init_oops_id+0x0/0x50 @ 1
[ 1.330177] initcall init_oops_id+0x0/0x50 returned 0 after 4 usecs
[ 1.330182] calling sched_clock_init_late+0x0/0x89 @ 1
[ 1.330186] sched_clock: Marking stable (1326848444, 3167839)->(1434587381, -104571098)
[ 1.330394] initcall sched_clock_init_late+0x0/0x89 returned 0 after 203 usecs
[ 1.330398] calling sched_init_debug+0x0/0x3a @ 1
[ 1.330407] initcall sched_init_debug+0x0/0x3a returned 0 after 5 usecs
[ 1.330410] calling pm_qos_power_init+0x0/0x9a @ 1
[ 1.330956] initcall pm_qos_power_init+0x0/0x9a returned 0 after 528 usecs
[ 1.330959] calling pm_debugfs_init+0x0/0x24 @ 1
[ 1.330966] initcall pm_debugfs_init+0x0/0x24 returned 0 after 3 usecs
[ 1.330970] calling printk_late_init+0x0/0x106 @ 1
[ 1.330975] initcall printk_late_init+0x0/0x106 returned 0 after 1 usecs
[ 1.330980] calling tk_debug_sleep_time_init+0x0/0x3c @ 1
[ 1.330986] initcall tk_debug_sleep_time_init+0x0/0x3c returned 0 after 2 usecs
[ 1.330991] calling debugfs_kprobe_init+0x0/0xb7 @ 1
[ 1.331029] initcall debugfs_kprobe_init+0x0/0xb7 returned 0 after 32 usecs
[ 1.331034] calling taskstats_init+0x0/0x38 @ 1
[ 1.331055] registered taskstats version 1
[ 1.331058] initcall taskstats_init+0x0/0x38 returned 0 after 20 usecs
[ 1.331063] calling load_system_certificate_list+0x0/0xc4 @ 1
[ 1.331065] Loading compiled-in X.509 certificates
[ 1.331068] initcall load_system_certificate_list+0x0/0xc4 returned 0 after 2 usecs
[ 1.331073] calling fault_around_debugfs+0x0/0x35 @ 1
[ 1.331083] initcall fault_around_debugfs+0x0/0x35 returned 0 after 6 usecs
[ 1.331088] calling max_swapfiles_check+0x0/0xc @ 1
[ 1.331092] initcall max_swapfiles_check+0x0/0xc returned 0 after 0 usecs
[ 1.331097] calling init_zswap+0x0/0x3a7 @ 1
[ 1.331147] zswap: loaded using pool lzo/zbud
[ 1.331308] initcall init_zswap+0x0/0x3a7 returned 0 after 201 usecs
[ 1.331312] calling split_huge_pages_debugfs+0x0/0x35 @ 1
[ 1.331318] initcall split_huge_pages_debugfs+0x0/0x35 returned 0 after 2 usecs
[ 1.331321] calling kmemleak_late_init+0x0/0x8d @ 1
[ 1.331334] initcall kmemleak_late_init+0x0/0x8d returned -12 after 9 usecs
[ 1.331337] calling check_early_ioremap_leak+0x0/0x38 @ 1
[ 1.331341] initcall check_early_ioremap_leak+0x0/0x38 returned 0 after 0 usecs
[ 1.331344] calling set_hardened_usercopy+0x0/0x28 @ 1
[ 1.331348] initcall set_hardened_usercopy+0x0/0x28 returned 1 after 0 usecs
[ 1.331351] calling init_root_keyring+0x0/0xf @ 1
[ 1.331379] initcall init_root_keyring+0x0/0xf returned 0 after 24 usecs
[ 1.331382] calling big_key_init+0x0/0xa8 @ 1
[ 1.332677] Key type big_key registered
[ 1.332691] initcall big_key_init+0x0/0xa8 returned 0 after 1268 usecs
[ 1.332699] calling prandom_reseed+0x0/0x27 @ 1
[ 1.332710] initcall prandom_reseed+0x0/0x27 returned 0 after 7 usecs
[ 1.332714] calling init_error_injection+0x0/0x61 @ 1
[ 1.332866] initcall init_error_injection+0x0/0x61 returned 0 after 143 usecs
[ 1.332871] calling pci_resource_alignment_sysfs_init+0x0/0x23 @ 1
[ 1.332884] initcall pci_resource_alignment_sysfs_init+0x0/0x23 returned 0 after 9 usecs
[ 1.332889] calling pci_sysfs_init+0x0/0x47 @ 1
[ 1.333179] initcall pci_sysfs_init+0x0/0x47 returned 0 after 278 usecs
[ 1.333183] calling clk_debug_init+0x0/0xe7 @ 1
[ 1.333198] initcall clk_debug_init+0x0/0xe7 returned 0 after 11 usecs
[ 1.333204] calling deferred_probe_initcall+0x0/0x90 @ 1
[ 1.333257] initcall deferred_probe_initcall+0x0/0x90 returned 0 after 46 usecs
[ 1.333263] calling late_resume_init+0x0/0xf9 @ 1
[ 1.333265] Magic number: 2:730:218
[ 1.333390] initcall late_resume_init+0x0/0xf9 returned 0 after 120 usecs
[ 1.333394] calling sync_debugfs_init+0x0/0x51 @ 1
[ 1.333409] initcall sync_debugfs_init+0x0/0x51 returned 0 after 11 usecs
[ 1.333414] calling rtc_hctosys+0x0/0xee @ 1
[ 1.333529] rtc_cmos 00:00: setting system clock to 2018-09-24 07:13:24 UTC (1537773204)
[ 1.333534] initcall rtc_hctosys+0x0/0xee returned 0 after 113 usecs
[ 1.333537] calling firmware_memmap_init+0x0/0x2d @ 1
[ 1.333589] initcall firmware_memmap_init+0x0/0x2d returned 0 after 46 usecs
[ 1.333593] calling pci_mmcfg_late_insert_resources+0x0/0x49 @ 1
[ 1.333596] initcall pci_mmcfg_late_insert_resources+0x0/0x49 returned 0 after 0 usecs
[ 1.333602] calling tcp_congestion_default+0x0/0x19 @ 1
[ 1.333607] initcall tcp_congestion_default+0x0/0x19 returned 0 after 1 usecs
[ 1.333613] calling clear_boot_tracer+0x0/0x2a @ 1
[ 1.333617] initcall clear_boot_tracer+0x0/0x2a returned 0 after 0 usecs
[ 1.333622] calling tracing_set_default_clock+0x0/0x36 @ 1
[ 1.333627] initcall tracing_set_default_clock+0x0/0x36 returned 0 after 0 usecs
[ 1.333633] calling acpi_gpio_handle_deferred_request_interrupts+0x0/0xb0 @ 1
[ 1.333637] initcall acpi_gpio_handle_deferred_request_interrupts+0x0/0xb0 returned 0 after 0 usecs
[ 1.333642] calling clk_disable_unused+0x0/0x100 @ 1
[ 1.333647] initcall clk_disable_unused+0x0/0x100 returned 0 after 1 usecs
[ 1.353531] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.354129] probe of serio0 returned 1 after 28522 usecs
[ 1.398973] probe of serio1 returned 0 after 44823 usecs
[ 1.410540] probe of serio1 returned 0 after 11540 usecs
[ 1.575148] tsc: Refined TSC clocksource calibration: 1600.003 MHz
[ 1.575165] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x171027d5f29, max_idle_ns: 440795236168 ns
[ 1.575314] clocksource: Switched to clocksource tsc
[ 1.630345] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.630398] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.630437] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.630479] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.630510] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.791167] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.792365] ata1.00: ATA-9: SanDisk SDSSDP064G, 2.0.0, max UDMA/133
[ 1.792372] ata1.00: 125045424 sectors, multi 1: LBA48 NCQ (depth 32)
[ 1.793051] ata1.00: configured for UDMA/133
[ 1.793786] scsi 0:0:0:0: Direct-Access ATA SanDisk SDSSDP06 0 PQ: 0 ANSI: 5
[ 1.794443] probe of 0:0:0:0 returned 1 after 93 usecs
[ 1.794665] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.794711] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[ 1.794799] sd 0:0:0:0: [sda] Write Protect is off
[ 1.794803] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.794843] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.796260] sda: sda1
[ 1.796929] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.807430] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.807466] VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
[ 1.808454] random: fast init done
[ 1.809579] devtmpfs: mounted
[ 1.811142] Freeing init [mem 0xd2c1d000-0xd2d32fff]
[ 1.812263] Freeing unused kernel image memory: 1112K
[ 1.816802] RO text: 0xd2000000 - 0xd2880fff
[ 1.817038] Write protecting the kernel text: 8708k
[ 1.817040] RO data: 0xd2881000 - 0xd2b4cfff
[ 1.817363] Write protecting the kernel read-only data: 2864k
[ 1.817364] NX data: 0xd2881000 - 0xd2dfffff
[ 1.817366] NX-protecting the kernel data: 5628k
[ 1.817641] ------------[ cut here ]------------
[ 1.817648] x86/mm: Found insecure W+X mapping at address (ptrval)/0xc00a0000
[ 1.817664] WARNING: CPU: 1 PID: 1 at arch/x86/mm/dump_pagetables.c:283 note_page+0x6c9/0x6f0
[ 1.817666] Modules linked in:
[ 1.817675] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.19.0-rc5-00001-g59d53fa4dfcf #210
[ 1.817677] Hardware name: ASROCK E350M1/E350M1, BIOS 4.8-1577-ge072247e6e 09/22/2018
[ 1.817681] EIP: note_page+0x6c9/0x6f0
[ 1.817685] Code: 89 45 d8 eb c6 b9 90 cb 88 d2 e9 e4 fa ff ff 89 54 24 08 89 54 24 04 c7 04 24 64 d0 a4 d2 c6 05 66 6e be d2 01 e8 77 65 00 00 <0f> 0b 8b 56 14 e9 15 fa ff ff 8b 46 18 e9 3e fb ff ff 8d 74 26 00
[ 1.817688] EAX: 00000041 EBX: 80000000 ECX: 00000001 EDX: d2d51008
[ 1.817690] ESI: f7127f44 EDI: 00000000 EBP: f7127ef4 ESP: f7127eb0
[ 1.817693] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00210292
[ 1.817695] CR0: 80050033 CR2: 00000000 CR3: 12d40000 CR4: 000006f0
[ 1.817696] Call Trace:
[ 1.817709] ? set_memory_decrypted+0x10/0x10
[ 1.817712] ? set_memory_decrypted+0x10/0x10
[ 1.817717] ptdump_walk_pgd_level_core+0x2b6/0x310
[ 1.817723] ptdump_walk_pgd_level_checkwx+0x20/0x22
[ 1.817728] mark_rodata_ro+0x12c/0x13d
[ 1.817732] ? rest_init+0x8a/0x8a
[ 1.817734] kernel_init+0x34/0xe5
[ 1.817738] ret_from_fork+0x1c/0x38
[ 1.817742] ---[ end trace 1619df0416d868fd ]---
[ 1.818211] x86/mm: Checked W+X mappings: FAILED, 96 W+X pages found.
[ 1.818219] Run /lib/systemd/systemd-bootchart as init process
[ 1.930645] random: systemd-bootcha: uninitialized urandom read (16 bytes read)
[ 2.105029] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 2.117120] systemd[1]: Detected architecture x86.
[ 2.122129] systemd[1]: Set hostname to <kodi>.
[ 2.499417] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.499708] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.499849] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.499872] systemd[1]: Reached target Network.
[ 2.501194] systemd[1]: Created slice User and Session Slice.
[ 2.501370] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 2.501543] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 2.501969] systemd[1]: Listening on Journal Socket.
[ 2.516198] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 2.574989] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 3.225065] calling coreboot_bus_init+0x0/0x1000 [coreboot_table] @ 151
[ 3.225099] initcall coreboot_bus_init+0x0/0x1000 [coreboot_table] returned 0 after 24 usecs
[ 3.226432] calling coreboot_table_acpi_init+0x0/0x1000 [coreboot_table_acpi] @ 151
[ 3.229803] probe of BOOT0000:00 returned 1 after 3340 usecs
[ 3.229866] initcall coreboot_table_acpi_init+0x0/0x1000 [coreboot_table_acpi] returned 0 after 3342 usecs
[ 3.234062] calling acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] @ 152
[ 3.234233] acpi_cpufreq: overriding BIOS provided _PSD data
[ 3.234387] initcall acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] returned 0 after 307 usecs
[ 3.235874] calling pcc_cpufreq_init+0x0/0xebc [pcc_cpufreq] @ 153
[ 3.235883] initcall pcc_cpufreq_init+0x0/0xebc [pcc_cpufreq] returned 0 after 1 usecs
[ 3.347425] calling ehci_hcd_init+0x0/0x1000 [ehci_hcd] @ 160
[ 3.347431] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.347455] initcall ehci_hcd_init+0x0/0x1000 [ehci_hcd] returned 0 after 18 usecs
[ 3.351112] calling ehci_pci_init+0x0/0x1000 [ehci_pci] @ 160
[ 3.351117] ehci-pci: EHCI PCI platform driver
[ 3.351684] QUIRK: Enable AMD PLL fix
[ 3.352270] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 3.352290] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 3.352303] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 3.352350] ehci-pci 0000:00:12.2: debug port 1
[ 3.352454] ehci-pci 0000:00:12.2: irq 17, io mem 0xf014c000
[ 3.358301] calling init_soundcore+0x0/0x1000 [soundcore] @ 157
[ 3.358333] initcall init_soundcore+0x0/0x1000 [soundcore] returned 0 after 23 usecs
[ 3.359689] calling ohci_hcd_mod_init+0x0/0x1000 [ohci_hcd] @ 150
[ 3.359694] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.359721] initcall ohci_hcd_mod_init+0x0/0x1000 [ohci_hcd] returned 0 after 21 usecs
[ 3.360980] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 3.365045] calling alsa_sound_init+0x0/0x82 [snd] @ 157
[ 3.365092] initcall alsa_sound_init+0x0/0x82 [snd] returned 0 after 31 usecs
[ 3.365499] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 3.365503] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.365506] usb usb1: Product: EHCI Host Controller
[ 3.365509] usb usb1: Manufacturer: Linux 4.19.0-rc5-00001-g59d53fa4dfcf ehci_hcd
[ 3.365512] usb usb1: SerialNumber: 0000:00:12.2
[ 3.369477] hub 1-0:1.0: USB hub found
[ 3.369500] hub 1-0:1.0: 5 ports detected
[ 3.372084] calling alsa_timer_init+0x0/0x1000 [snd_timer] @ 157
[ 3.372262] probe of 1-0:1.0 returned 1 after 2806 usecs
[ 3.372329] probe of usb1 returned 1 after 3003 usecs
[ 3.372412] probe of 0000:00:12.2 returned 1 after 21274 usecs
[ 3.373553] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 3.373577] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 3.373598] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 3.373665] ehci-pci 0000:00:13.2: debug port 1
[ 3.377802] initcall alsa_timer_init+0x0/0x1000 [snd_timer] returned 0 after 5565 usecs
[ 3.378076] ehci-pci 0000:00:13.2: irq 17, io mem 0xf014d000
[ 3.385736] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 3.385923] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 3.385926] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.385929] usb usb2: Product: EHCI Host Controller
[ 3.385932] usb usb2: Manufacturer: Linux 4.19.0-rc5-00001-g59d53fa4dfcf ehci_hcd
[ 3.385935] usb usb2: SerialNumber: 0000:00:13.2
[ 3.391989] hub 2-0:1.0: USB hub found
[ 3.392270] hub 2-0:1.0: 5 ports detected
[ 3.395256] probe of 2-0:1.0 returned 1 after 3288 usecs
[ 3.395571] calling alsa_pcm_init+0x0/0x1000 [snd_pcm] @ 157
[ 3.395592] initcall alsa_pcm_init+0x0/0x1000 [snd_pcm] returned 0 after 9 usecs
[ 3.395686] probe of usb2 returned 1 after 3842 usecs
[ 3.398081] probe of 0000:00:13.2 returned 1 after 25655 usecs
[ 3.398153] initcall ehci_pci_init+0x0/0x1000 [ehci_pci] returned 0 after 2510 usecs
[ 3.406093] calling ohci_pci_init+0x0/0x1000 [ohci_pci] @ 150
[ 3.406099] ohci-pci: OHCI PCI platform driver
[ 3.420549] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 3.420578] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 3.425310] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0148000
[ 3.438309] calling hda_bus_init+0x0/0x14 [snd_hda_core] @ 157
[ 3.438351] initcall hda_bus_init+0x0/0x14 [snd_hda_core] returned 0 after 25 usecs
[ 3.481121] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 3.481128] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.481131] usb usb3: Product: OHCI PCI host controller
[ 3.481134] usb usb3: Manufacturer: Linux 4.19.0-rc5-00001-g59d53fa4dfcf ohci_hcd
[ 3.481137] usb usb3: SerialNumber: 0000:00:12.0
[ 3.486697] hub 3-0:1.0: USB hub found
[ 3.487987] hub 3-0:1.0: 5 ports detected
[ 3.490130] probe of 3-0:1.0 returned 1 after 3453 usecs
[ 3.490237] probe of usb3 returned 1 after 3677 usecs
[ 3.490410] probe of 0000:00:12.0 returned 1 after 84288 usecs
[ 3.492430] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 3.492460] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
[ 3.492531] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0149000
[ 3.501191] calling piix4_driver_init+0x0/0x1000 [i2c_piix4] @ 154
[ 3.501272] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 3.501283] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection
[ 3.501549] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0x8060
[ 3.501648] probe of 0000:00:14.0 returned 1 after 427 usecs
[ 3.501690] initcall piix4_driver_init+0x0/0x1000 [i2c_piix4] returned 0 after 476 usecs
[ 3.522520] calling azx_driver_init+0x0/0xfe4 [snd_hda_intel] @ 149
[ 3.525807] probe of 0000:00:01.1 returned 1 after 3250 usecs
[ 3.528947] calling rtl8169_pci_driver_init+0x0/0x1000 [r8169] @ 154
[ 3.532689] probe of 0000:00:14.2 returned 1 after 6857 usecs
[ 3.533733] initcall azx_driver_init+0x0/0xfe4 [snd_hda_intel] returned 0 after 4647 usecs
[ 3.549945] calling hdmi_driver_init+0x0/0x1000 [snd_hda_codec_hdmi] @ 179
[ 3.556519] probe of hdaudioC0D0 returned 1 after 6549 usecs
[ 3.556588] initcall hdmi_driver_init+0x0/0x1000 [snd_hda_codec_hdmi] returned 0 after 6467 usecs
[ 3.557696] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input5
[ 3.566049] calling generic_driver_init+0x0/0x1000 [snd_hda_codec_generic] @ 181
[ 3.566096] initcall generic_driver_init+0x0/0x1000 [snd_hda_codec_generic] returned 0 after 33 usecs
[ 3.567245] calling k10temp_driver_init+0x0/0x1000 [k10temp] @ 162
[ 3.567921] calling phy_module_init+0x0/0x1000 [realtek] @ 182
[ 3.568118] initcall phy_module_init+0x0/0x1000 [realtek] returned 0 after 183 usecs
[ 3.568715] probe of r8169-300:00 returned 1 after 39 usecs
[ 3.568730] libphy: r8169: probed
[ 3.570312] r8169 0000:03:00.0 eth0: RTL8168e/8111e, bc:5f:f4:c8:d3:98, XID 2c200000, IRQ 28
[ 3.570318] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 3.571449] calling realtek_driver_init+0x0/0x1000 [snd_hda_codec_realtek] @ 181
[ 3.571829] snd_hda_codec_realtek hdaudioC1D0: ALC892: SKU not ready 0x00000100
[ 3.572850] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line
[ 3.572854] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.572858] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 3.572861] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 3.572864] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0
[ 3.572866] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 3.572871] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 3.572874] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 3.572877] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 3.572879] snd_hda_codec_realtek hdaudioC1D0: CD=0x1c
[ 3.583860] probe of 0000:03:00.0 returned 1 after 54866 usecs
[ 3.583926] initcall rtl8169_pci_driver_init+0x0/0x1000 [r8169] returned 0 after 12165 usecs
[ 3.587150] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 3.587156] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.587160] usb usb4: Product: OHCI PCI host controller
[ 3.587163] usb usb4: Manufacturer: Linux 4.19.0-rc5-00001-g59d53fa4dfcf ohci_hcd
[ 3.587166] usb usb4: SerialNumber: 0000:00:13.0
[ 3.587731] hub 4-0:1.0: USB hub found
[ 3.589969] hub 4-0:1.0: 5 ports detected
[ 3.590202] probe of 0000:00:18.3 returned 1 after 22920 usecs
[ 3.590249] initcall k10temp_driver_init+0x0/0x1000 [k10temp] returned 0 after 18345 usecs
[ 3.591969] probe of 4-0:1.0 returned 1 after 4251 usecs
[ 3.595822] probe of usb4 returned 1 after 8385 usecs
[ 3.595980] probe of 0000:00:13.0 returned 1 after 105560 usecs
[ 3.596657] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 3.596673] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5
[ 3.598518] ohci-pci 0000:00:14.5: irq 18, io mem 0xf014a000
[ 3.642832] probe of hdaudioC1D0 returned 1 after 71356 usecs
[ 3.642899] initcall realtek_driver_init+0x0/0x1000 [snd_hda_codec_realtek] returned 0 after 69751 usecs
[ 3.644282] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input6
[ 3.644430] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
[ 3.644566] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
[ 3.644699] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
[ 3.644941] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[ 3.645339] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[ 3.645480] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[ 3.645618] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
[ 3.654028] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 3.654035] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.654038] usb usb5: Product: OHCI PCI host controller
[ 3.654041] usb usb5: Manufacturer: Linux 4.19.0-rc5-00001-g59d53fa4dfcf ohci_hcd
[ 3.654044] usb usb5: SerialNumber: 0000:00:14.5
[ 3.662537] hub 5-0:1.0: USB hub found
[ 3.662562] hub 5-0:1.0: 2 ports detected
[ 3.662708] probe of 5-0:1.0 returned 1 after 193 usecs
[ 3.664403] probe of usb5 returned 1 after 2008 usecs
[ 3.664574] probe of 0000:00:14.5 returned 1 after 68583 usecs
[ 3.664618] initcall ohci_pci_init+0x0/0x1000 [ohci_pci] returned 0 after 90971 usecs
[ 3.838927] usb 3-2: new low-speed USB device number 2 using ohci-pci
[ 3.953582] r8169 0000:03:00.0 enp3s0: renamed from eth0
[ 4.010882] usb 3-2: New USB device found, idVendor=1241, idProduct=1122, bcdDevice= 1.00
[ 4.010889] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.020635] input: HID 1241:1122 as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:1241:1122.0001/input/input14
[ 4.022690] hid-generic 0003:1241:1122.0001: input,hidraw0: USB HID v1.00 Mouse [HID 1241:1122] on usb-0000:00:12.0-2/input0
[ 4.022729] probe of 0003:1241:1122.0001 returned 1 after 2420 usecs
[ 4.022804] probe of 3-2:1.0 returned 1 after 8864 usecs
[ 4.022869] probe of 3-2 returned 1 after 11707 usecs
[ 4.077952] r8169 0000:03:00.0: Direct firmware load for rtl_nic/rtl8168e-2.fw failed with error -2
[ 4.077963] r8169 0000:03:00.0 enp3s0: unable to load firmware patch rtl_nic/rtl8168e-2.fw (-2)
[ 4.078430] RTL8211DN Gigabit Ethernet r8169-300:00: attached PHY driver [RTL8211DN Gigabit Ethernet] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
[ 4.169028] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 5.688000] random: crng init done
[ 5.688008] random: 7 urandom warning(s) missed due to ratelimiting
[ 6.649287] r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 6.649323] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[-- Attachment #4: grub-no-issue.7z --]
[-- Type: application/x-7z-compressed, Size: 2320 bytes --]
[-- Attachment #5: 20180924–linux_4.19-rc5–master–grub-no-issue.txt --]
[-- Type: text/plain, Size: 118218 bytes --]
[ 0.000000] Linux version 4.19.0-rc5-00001-g59d53fa4dfcf (root@4ed78d5cbcf5) (gcc version 8.1.0 (Debian 8.1.0-11)) #210 SMP Mon Sep 24 06:22:17 UTC 2018
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000c0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7d3bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c7d3c000-0x00000000c7ffffff] type 16
[ 0.000000] BIOS-e820: [mem 0x00000000c8000000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable
[ 0.000000] kmemleak: Kernel memory leak detector disabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASROCK E350M1/E350M1, BIOS 4.8-1577-ge072247e6e 09/22/2018
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1599.976 MHz processor
[ 0.006508] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.006513] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.006524] last_pfn = 0x11f000 max_arch_pfn = 0x1000000
[ 0.006534] MTRR default type: uncachable
[ 0.006536] MTRR fixed ranges enabled:
[ 0.006539] 00000-9FFFF write-back
[ 0.006541] A0000-BFFFF uncachable
[ 0.006544] C0000-FFFFF write-back
[ 0.006545] MTRR variable ranges enabled:
[ 0.006549] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.006551] 1 base 0C0000000 mask FF8000000 write-back
[ 0.006554] 2 base 080000000 mask FC0000000 write-back
[ 0.006556] 3 base 000000000 mask F80000000 write-back
[ 0.006558] 4 disabled
[ 0.006559] 5 disabled
[ 0.006560] 6 disabled
[ 0.006561] 7 disabled
[ 0.006564] TOM2: 000000011f000000 aka 4592M
[ 0.006757] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.007046] Scanning 1 areas for low memory corruption
[ 0.007053] initial memory mapped: [mem 0x00000000-0x1f3fffff]
[ 0.007061] Base memory trampoline at [(ptrval)] 9b000 size 16384
[ 0.007217] BRK [0x1eed8000, 0x1eed8fff] PGTABLE
[ 0.007240] BRK [0x1eed9000, 0x1eed9fff] PGTABLE
[ 0.007253] ACPI: Early table checksum verification disabled
[ 0.007380] ACPI: RSDP 0x00000000000F0800 000024 (v02 CORE )
[ 0.007388] ACPI: XSDT 0x00000000C7D4D0E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.007402] ACPI: FACP 0x00000000C7D4F840 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
[ 0.007416] ACPI: DSDT 0x00000000C7D4D280 0025B6 (v02 ASROCK COREBOOT 00010001 INTL 20180810)
[ 0.007424] ACPI: FACS 0x00000000C7D4D240 000040
[ 0.007430] ACPI: FACS 0x00000000C7D4D240 000040
[ 0.007436] ACPI: SSDT 0x00000000C7D4F940 00008A (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.007444] ACPI: TCPA 0x00000000C7D4F9D0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.007451] ACPI: APIC 0x00000000C7D4FA10 00005C (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.007458] ACPI: HEST 0x00000000C7D4FA70 000028 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.007465] ACPI: SSDT 0x00000000C7D4FAA0 00168E (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.007473] ACPI: SSDT 0x00000000C7D51130 0003DE (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.007481] ACPI: VFCT 0x00000000C7D51510 00E269 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.007488] ACPI: HPET 0x00000000C7D5F780 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.007507] ACPI: Local APIC address 0xfee00000
[ 0.007515] 3706MB HIGHMEM available.
[ 0.007519] 885MB LOWMEM available.
[ 0.007520] mapped low ram: 0 - 375fe000
[ 0.007522] low ram: 0 - 375fe000
[ 0.007538] BRK [0x1eeda000, 0x1eedafff] PGTABLE
[ 0.018292] Zone ranges:
[ 0.018295] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.018299] Normal [mem 0x0000000001000000-0x00000000375fdfff]
[ 0.018301] HighMem [mem 0x00000000375fe000-0x000000011effffff]
[ 0.018304] Movable zone start for each node
[ 0.018305] Early memory node ranges
[ 0.018307] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.018309] node 0: [mem 0x0000000000100000-0x00000000c7d3bfff]
[ 0.018310] node 0: [mem 0x0000000100000000-0x000000011effffff]
[ 0.022290] Reserved but unavailable: 99109 pages
[ 0.022296] Initmem setup node 0 [mem 0x0000000000001000-0x000000011effffff]
[ 0.022300] On node 0 totalpages: 945371
[ 0.022303] DMA zone: 40 pages used for memmap
[ 0.022304] DMA zone: 0 pages reserved
[ 0.022306] DMA zone: 3999 pages, LIFO batch:0
[ 0.022522] Normal zone: 2175 pages used for memmap
[ 0.022524] Normal zone: 222718 pages, LIFO batch:63
[ 0.034057] HighMem zone: 718654 pages, LIFO batch:63
[ 0.077498] Using APIC driver default
[ 0.077777] ACPI: Local APIC address 0xfee00000
[ 0.077801] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.077807] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.077811] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.077814] ACPI: IRQ0 used by override.
[ 0.077816] ACPI: IRQ9 used by override.
[ 0.077820] Using ACPI (MADT) for SMP configuration information
[ 0.077824] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.077835] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.077862] [mem 0xe0000000-0xf7ffffff] available for PCI devices
[ 0.077869] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.077906] random: get_random_bytes called from start_kernel+0x7d/0x44e with crng_init=0
[ 0.077924] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.078161] percpu: Embedded 29 pages/cpu @(ptrval) s89996 r0 d28788 u118784
[ 0.078173] pcpu-alloc: s89996 r0 d28788 u118784 alloc=29*4096
[ 0.078176] pcpu-alloc: [0] 0 [0] 1
[ 0.078208] Built 1 zonelists, mobility grouping on. Total pages: 943156
[ 0.078213] Kernel command line: BOOT_IMAGE=(ahci0,msdos1)/boot/vmlinuz-4.19.0-rc5-00001-g59d53fa4dfcf root=/dev/sda1 ro noisapnp cryptomgr.notests quiet initcall_debug init=/lib/systemd/systemd-bootchart memory_corruption_check=1 memory_corruption_check_size=512k memory_corruption_check_period=5 iomem=relaxed apparmor=0 selinux=0 kmemleak=off initcall_blacklist=tracer_init_tracefs,serial8250_init
[ 0.078599] blacklisting initcall tracer_init_tracefs
[ 0.078608] blacklisting initcall serial8250_init
[ 0.078887] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.079075] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.079086] Initializing CPU#0
[ 0.079097] Initializing HighMem for node 0 (000375fe:0011f000)
[ 0.276993] Initializing Movable for node 0 (00000000:00000000)
[ 0.286300] Memory: 3711464K/3781484K available (8705K kernel code, 756K rwdata, 2840K rodata, 1112K init, 644K bss, 70020K reserved, 0K cma-reserved, 2874616K highmem)
[ 0.286310] virtual kernel memory layout:
fixmap : 0xfff8f000 - 0xfffff000 ( 448 kB)
cpu_entry : 0xffa00000 - 0xffa4f000 ( 316 kB)
pkmap : 0xff600000 - 0xff800000 (2048 kB)
vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
.init : 0xdec1d000 - 0xded33000 (1112 kB)
.data : 0xde8807dc - 0xdec0b100 (3626 kB)
.text : 0xde000000 - 0xde8807dc (8705 kB)
[ 0.286312] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.286620] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.286626] ftrace: allocating 33660 entries in 66 pages
[ 0.316114] rcu: Hierarchical RCU implementation.
[ 0.316117] rcu: RCU event tracing is enabled.
[ 0.322102] NR_IRQS: 2304, nr_irqs: 440, preallocated irqs: 16
[ 0.322563] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval)
[ 0.322626] calling con_init+0x0/0x1e3 @ 0
[ 0.325010] Console: colour VGA+ 80x25
[ 0.325019] console [tty0] enabled
[ 0.325024] initcall con_init+0x0/0x1e3 returned 0 after 0 usecs
[ 0.325027] calling univ8250_console_init+0x0/0x2a @ 0
[ 0.325038] initcall univ8250_console_init+0x0/0x2a returned 0 after 0 usecs
[ 0.325079] ACPI: Core revision 20180810
[ 0.325631] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.325651] hpet clockevent registered
[ 0.325661] APIC: Switch to symmetric I/O mode setup
[ 0.325663] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.326175] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.330734] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x17100e62328, max_idle_ns: 440795276166 ns
[ 0.330753] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.95 BogoMIPS (lpj=1599976)
[ 0.330759] pid_max: default: 32768 minimum: 301
[ 0.330849] Security Framework initialized
[ 0.330851] Yama: becoming mindful.
[ 0.330866] calling selinux_init+0x0/0x1c3 @ 0
[ 0.330868] SELinux: Disabled at boot.
[ 0.330871] initcall selinux_init+0x0/0x1c3 returned 0 after 0 usecs
[ 0.330901] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.330909] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.331339] mce: CPU supports 6 MCE banks
[ 0.331357] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.331359] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[ 0.331366] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.331367] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.331369] Speculative Store Bypass: Vulnerable
[ 0.331598] Freeing SMP alternatives memory: 32K
[ 0.433737] smpboot: CPU0: AMD E-350D APU with Radeon(tm) HD Graphics (family: 0x14, model: 0x2, stepping: 0x0)
[ 0.433737] calling trace_init_flags_sys_enter+0x0/0x13 @ 1
[ 0.433737] initcall trace_init_flags_sys_enter+0x0/0x13 returned 0 after 0 usecs
[ 0.433737] calling trace_init_flags_sys_exit+0x0/0x13 @ 1
[ 0.433737] initcall trace_init_flags_sys_exit+0x0/0x13 returned 0 after 0 usecs
[ 0.433737] calling init_hw_perf_events+0x0/0x5bd @ 1
[ 0.433737] Performance Events: AMD PMU driver.
[ 0.433737] ... version: 0
[ 0.433737] ... bit width: 48
[ 0.433737] ... generic registers: 4
[ 0.433737] ... value mask: 0000ffffffffffff
[ 0.433737] ... max period: 00007fffffffffff
[ 0.433737] ... fixed-purpose events: 0
[ 0.433737] ... event mask: 000000000000000f
[ 0.433737] initcall init_hw_perf_events+0x0/0x5bd returned 0 after 0 usecs
[ 0.433737] calling init_real_mode+0x0/0x108 @ 1
[ 0.433737] initcall init_real_mode+0x0/0x108 returned 0 after 0 usecs
[ 0.433737] calling trace_init_perf_perm_irq_work_exit+0x0/0x16 @ 1
[ 0.433737] initcall trace_init_perf_perm_irq_work_exit+0x0/0x16 returned 0 after 0 usecs
[ 0.433737] calling validate_x2apic+0x0/0x49 @ 1
[ 0.433737] initcall validate_x2apic+0x0/0x49 returned 0 after 0 usecs
[ 0.433737] calling register_nmi_cpu_backtrace_handler+0x0/0x18 @ 1
[ 0.433737] initcall register_nmi_cpu_backtrace_handler+0x0/0x18 returned 0 after 0 usecs
[ 0.433737] calling spawn_ksoftirqd+0x0/0x39 @ 1
[ 0.433737] initcall spawn_ksoftirqd+0x0/0x39 returned 0 after 0 usecs
[ 0.433737] calling migration_init+0x0/0x31 @ 1
[ 0.433737] initcall migration_init+0x0/0x31 returned 0 after 0 usecs
[ 0.433737] calling check_cpu_stall_init+0x0/0x1b @ 1
[ 0.433737] initcall check_cpu_stall_init+0x0/0x1b returned 0 after 0 usecs
[ 0.433737] calling srcu_bootup_announce+0x0/0x30 @ 1
[ 0.433737] rcu: Hierarchical SRCU implementation.
[ 0.433737] initcall srcu_bootup_announce+0x0/0x30 returned 0 after 0 usecs
[ 0.433737] calling rcu_spawn_gp_kthread+0x0/0xfc @ 1
[ 0.433737] initcall rcu_spawn_gp_kthread+0x0/0xfc returned 0 after 0 usecs
[ 0.433737] calling cpu_stop_init+0x0/0x78 @ 1
[ 0.433737] initcall cpu_stop_init+0x0/0x78 returned 0 after 0 usecs
[ 0.433737] calling init_events+0x0/0x3a @ 1
[ 0.433737] initcall init_events+0x0/0x3a returned 0 after 0 usecs
[ 0.433737] calling init_trace_printk+0x0/0xf @ 1
[ 0.433737] initcall init_trace_printk+0x0/0xf returned 0 after 0 usecs
[ 0.433737] calling event_trace_enable_again+0x0/0x21 @ 1
[ 0.433737] initcall event_trace_enable_again+0x0/0x21 returned 0 after 0 usecs
[ 0.433737] calling jump_label_init_module+0x0/0x14 @ 1
[ 0.433737] initcall jump_label_init_module+0x0/0x14 returned 0 after 0 usecs
[ 0.433737] calling dynamic_debug_init+0x0/0x211 @ 1
[ 0.433924] initcall dynamic_debug_init+0x0/0x211 returned 0 after 976 usecs
[ 0.433930] calling rand_initialize+0x0/0x110 @ 1
[ 0.434009] initcall rand_initialize+0x0/0x110 returned 0 after 0 usecs
[ 0.434013] calling initialize_ptr_random+0x0/0x47 @ 1
[ 0.434017] initcall initialize_ptr_random+0x0/0x47 returned 0 after 0 usecs
[ 0.434116] smp: Bringing up secondary CPUs ...
[ 0.434352] CPU 1 irqstacks, hard=(ptrval) soft=(ptrval)
[ 0.434355] x86: Booting SMP configuration:
[ 0.434358] .... node #0, CPUs: #1
[ 0.004153] Initializing CPU#1
[ 0.434830] smp: Brought up 1 node, 2 CPUs
[ 0.434830] smpboot: Max logical packages: 1
[ 0.434830] smpboot: Total of 2 processors activated (6399.90 BogoMIPS)
[ 0.436795] devtmpfs: initialized
[ 0.437305] calling ipc_ns_init+0x0/0x48 @ 1
[ 0.437324] initcall ipc_ns_init+0x0/0x48 returned 0 after 0 usecs
[ 0.437328] calling init_mmap_min_addr+0x0/0x27 @ 1
[ 0.437332] initcall init_mmap_min_addr+0x0/0x27 returned 0 after 0 usecs
[ 0.437336] calling net_ns_init+0x0/0xdc @ 1
[ 0.437488] initcall net_ns_init+0x0/0xdc returned 0 after 0 usecs
[ 0.437488] calling e820__register_nvs_regions+0x0/0x3e @ 1
[ 0.437488] initcall e820__register_nvs_regions+0x0/0x3e returned 0 after 0 usecs
[ 0.437488] calling cpufreq_register_tsc_scaling+0x0/0x2a @ 1
[ 0.437488] initcall cpufreq_register_tsc_scaling+0x0/0x2a returned 0 after 0 usecs
[ 0.437488] calling init_cpu_syscore+0x0/0x11 @ 1
[ 0.437488] initcall init_cpu_syscore+0x0/0x11 returned 0 after 0 usecs
[ 0.437488] calling reboot_init+0x0/0x22 @ 1
[ 0.437488] initcall reboot_init+0x0/0x22 returned 0 after 0 usecs
[ 0.437488] calling init_lapic_sysfs+0x0/0x24 @ 1
[ 0.437488] initcall init_lapic_sysfs+0x0/0x24 returned 0 after 0 usecs
[ 0.437488] calling pgd_cache_init+0x0/0x35 @ 1
[ 0.437488] initcall pgd_cache_init+0x0/0x35 returned 0 after 0 usecs
[ 0.437488] calling alloc_frozen_cpus+0x0/0xc @ 1
[ 0.437488] initcall alloc_frozen_cpus+0x0/0xc returned 0 after 0 usecs
[ 0.437488] calling cpu_hotplug_pm_sync_init+0x0/0x16 @ 1
[ 0.437488] initcall cpu_hotplug_pm_sync_init+0x0/0x16 returned 0 after 0 usecs
[ 0.437488] calling wq_sysfs_init+0x0/0x29 @ 1
[ 0.437488] initcall wq_sysfs_init+0x0/0x29 returned 0 after 0 usecs
[ 0.437488] calling ksysfs_init+0x0/0x7d @ 1
[ 0.437488] initcall ksysfs_init+0x0/0x7d returned 0 after 0 usecs
[ 0.437488] calling pm_init+0x0/0x63 @ 1
[ 0.437751] initcall pm_init+0x0/0x63 returned 0 after 0 usecs
[ 0.437751] calling rcu_set_runtime_mode+0x0/0x16 @ 1
[ 0.437751] initcall rcu_set_runtime_mode+0x0/0x16 returned 0 after 0 usecs
[ 0.437751] calling init_jiffies_clocksource+0x0/0x1b @ 1
[ 0.437751] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.437751] initcall init_jiffies_clocksource+0x0/0x1b returned 0 after 0 usecs
[ 0.437751] calling futex_init+0x0/0xd5 @ 1
[ 0.437751] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.437751] initcall futex_init+0x0/0xd5 returned 0 after 0 usecs
[ 0.437751] calling cgroup_wq_init+0x0/0x2c @ 1
[ 0.437751] initcall cgroup_wq_init+0x0/0x2c returned 0 after 0 usecs
[ 0.437751] calling cgroup1_wq_init+0x0/0x2c @ 1
[ 0.437751] initcall cgroup1_wq_init+0x0/0x2c returned 0 after 0 usecs
[ 0.437751] calling ftrace_mod_cmd_init+0x0/0xf @ 1
[ 0.437751] initcall ftrace_mod_cmd_init+0x0/0xf returned 0 after 0 usecs
[ 0.437751] calling init_wakeup_tracer+0x0/0x2b @ 1
[ 0.437751] initcall init_wakeup_tracer+0x0/0x2b returned 0 after 0 usecs
[ 0.437751] calling init_graph_trace+0x0/0x5a @ 1
[ 0.437751] initcall init_graph_trace+0x0/0x5a returned 0 after 0 usecs
[ 0.437751] calling init_per_zone_wmark_min+0x0/0x66 @ 1
[ 0.437751] initcall init_per_zone_wmark_min+0x0/0x66 returned 0 after 0 usecs
[ 0.437751] calling init_zero_pfn+0x0/0x47 @ 1
[ 0.437751] initcall init_zero_pfn+0x0/0x47 returned 0 after 0 usecs
[ 0.437751] calling cma_init_reserved_areas+0x0/0x170 @ 1
[ 0.437751] initcall cma_init_reserved_areas+0x0/0x170 returned 0 after 0 usecs
[ 0.437751] calling fsnotify_init+0x0/0x44 @ 1
[ 0.437751] initcall fsnotify_init+0x0/0x44 returned 0 after 0 usecs
[ 0.437751] calling filelock_init+0x0/0x7f @ 1
[ 0.437751] initcall filelock_init+0x0/0x7f returned 0 after 0 usecs
[ 0.437751] calling init_script_binfmt+0x0/0x18 @ 1
[ 0.437751] initcall init_script_binfmt+0x0/0x18 returned 0 after 0 usecs
[ 0.437751] calling init_elf_binfmt+0x0/0x18 @ 1
[ 0.437751] initcall init_elf_binfmt+0x0/0x18 returned 0 after 0 usecs
[ 0.437751] calling configfs_init+0x0/0x88 @ 1
[ 0.437751] initcall configfs_init+0x0/0x88 returned 0 after 0 usecs
[ 0.437751] calling debugfs_init+0x0/0x4b @ 1
[ 0.437751] initcall debugfs_init+0x0/0x4b returned 0 after 0 usecs
[ 0.437751] calling tracefs_init+0x0/0x39 @ 1
[ 0.437751] initcall tracefs_init+0x0/0x39 returned 0 after 0 usecs
[ 0.437751] calling securityfs_init+0x0/0x63 @ 1
[ 0.437751] initcall securityfs_init+0x0/0x63 returned 0 after 0 usecs
[ 0.437751] calling prandom_init+0x0/0xb1 @ 1
[ 0.437751] initcall prandom_init+0x0/0xb1 returned 0 after 0 usecs
[ 0.437751] calling pinctrl_init+0x0/0x9d @ 1
[ 0.437751] pinctrl core: initialized pinctrl subsystem
[ 0.437751] initcall pinctrl_init+0x0/0x9d returned 0 after 0 usecs
[ 0.437751] calling gpiolib_dev_init+0x0/0xb3 @ 1
[ 0.437751] initcall gpiolib_dev_init+0x0/0xb3 returned 0 after 0 usecs
[ 0.437751] calling component_debug_init+0x0/0x1d @ 1
[ 0.437751] initcall component_debug_init+0x0/0x1d returned 0 after 0 usecs
[ 0.437751] calling early_resume_init+0x0/0xf0 @ 1
[ 0.437751] RTC time: 6:46:41, date: 09/24/18
[ 0.437751] initcall early_resume_init+0x0/0xf0 returned 0 after 0 usecs
[ 0.437751] calling opp_debug_init+0x0/0x39 @ 1
[ 0.437751] initcall opp_debug_init+0x0/0x39 returned 0 after 0 usecs
[ 0.437751] calling cpufreq_core_init+0x0/0x46 @ 1
[ 0.437751] initcall cpufreq_core_init+0x0/0x46 returned 0 after 0 usecs
[ 0.437751] calling cpuidle_init+0x0/0x3b @ 1
[ 0.437751] initcall cpuidle_init+0x0/0x3b returned 0 after 0 usecs
[ 0.437751] calling bsp_pm_check_init+0x0/0x16 @ 1
[ 0.437751] initcall bsp_pm_check_init+0x0/0x16 returned 0 after 0 usecs
[ 0.437751] calling sock_init+0x0/0x8e @ 1
[ 0.437833] initcall sock_init+0x0/0x8e returned 0 after 0 usecs
[ 0.437837] calling net_inuse_init+0x0/0x24 @ 1
[ 0.437844] initcall net_inuse_init+0x0/0x24 returned 0 after 0 usecs
[ 0.437848] calling net_defaults_init+0x0/0x24 @ 1
[ 0.437851] initcall net_defaults_init+0x0/0x24 returned 0 after 0 usecs
[ 0.437855] calling init_default_flow_dissectors+0x0/0x48 @ 1
[ 0.437860] initcall init_default_flow_dissectors+0x0/0x48 returned 0 after 0 usecs
[ 0.437863] calling netpoll_init+0x0/0x34 @ 1
[ 0.437866] initcall netpoll_init+0x0/0x34 returned 0 after 0 usecs
[ 0.437870] calling netlink_proto_init+0x0/0x123 @ 1
[ 0.437910] NET: Registered protocol family 16
[ 0.437935] initcall netlink_proto_init+0x0/0x123 returned 0 after 976 usecs
[ 0.438158] calling irq_sysfs_init+0x0/0x7e @ 1
[ 0.438305] initcall irq_sysfs_init+0x0/0x7e returned 0 after 0 usecs
[ 0.438310] calling audit_init+0x0/0x164 @ 1
[ 0.438316] audit: initializing netlink subsys (disabled)
[ 0.438826] initcall audit_init+0x0/0x164 returned 0 after 0 usecs
[ 0.438826] audit: type=2000 audit(1537771601.113:1): state=initialized audit_enabled=0 res=1
[ 0.438838] calling release_early_probes+0x0/0x36 @ 1
[ 0.438842] initcall release_early_probes+0x0/0x36 returned 0 after 0 usecs
[ 0.438848] calling bdi_class_init+0x0/0x41 @ 1
[ 0.438893] initcall bdi_class_init+0x0/0x41 returned 0 after 0 usecs
[ 0.438897] calling mm_sysfs_init+0x0/0x27 @ 1
[ 0.438904] initcall mm_sysfs_init+0x0/0x27 returned 0 after 0 usecs
[ 0.438909] calling gpiolib_sysfs_init+0x0/0x85 @ 1
[ 0.438921] initcall gpiolib_sysfs_init+0x0/0x85 returned 0 after 0 usecs
[ 0.438925] calling pcibus_class_init+0x0/0x19 @ 1
[ 0.438934] initcall pcibus_class_init+0x0/0x19 returned 0 after 0 usecs
[ 0.438938] calling pci_driver_init+0x0/0x22 @ 1
[ 0.438968] initcall pci_driver_init+0x0/0x22 returned 0 after 0 usecs
[ 0.438973] calling backlight_class_init+0x0/0x91 @ 1
[ 0.438982] initcall backlight_class_init+0x0/0x91 returned 0 after 0 usecs
[ 0.438986] calling tty_class_init+0x0/0x30 @ 1
[ 0.438993] initcall tty_class_init+0x0/0x30 returned 0 after 0 usecs
[ 0.438997] calling vtconsole_class_init+0x0/0xc0 @ 1
[ 0.439043] initcall vtconsole_class_init+0x0/0xc0 returned 0 after 0 usecs
[ 0.439048] calling wakeup_sources_debugfs_init+0x0/0x24 @ 1
[ 0.439056] initcall wakeup_sources_debugfs_init+0x0/0x24 returned 0 after 0 usecs
[ 0.439060] calling regmap_initcall+0x0/0x11 @ 1
[ 0.439067] initcall regmap_initcall+0x0/0x11 returned 0 after 0 usecs
[ 0.439071] calling i2c_init+0x0/0xa5 @ 1
[ 0.439767] initcall i2c_init+0x0/0xa5 returned 0 after 976 usecs
[ 0.439772] calling init_menu+0x0/0x14 @ 1
[ 0.439813] cpuidle: using governor menu
[ 0.439813] initcall init_menu+0x0/0x14 returned 0 after 0 usecs
[ 0.439813] calling pcc_init+0x0/0x2e4 @ 1
[ 0.439813] initcall pcc_init+0x0/0x2e4 returned -19 after 0 usecs
[ 0.439813] calling amd_postcore_init+0x0/0xf2 @ 1
[ 0.439871] initcall amd_postcore_init+0x0/0xf2 returned 0 after 0 usecs
[ 0.439871] calling kobject_uevent_init+0x0/0xf @ 1
[ 0.439871] initcall kobject_uevent_init+0x0/0xf returned 0 after 0 usecs
[ 0.440018] calling bts_init+0x0/0xae @ 1
[ 0.440021] initcall bts_init+0x0/0xae returned -19 after 0 usecs
[ 0.440025] calling pt_init+0x0/0x2f9 @ 1
[ 0.440028] initcall pt_init+0x0/0x2f9 returned -19 after 0 usecs
[ 0.440033] calling boot_params_ksysfs_init+0x0/0x216 @ 1
[ 0.440051] initcall boot_params_ksysfs_init+0x0/0x216 returned 0 after 0 usecs
[ 0.440055] calling sbf_init+0x0/0xc8 @ 1
[ 0.440058] initcall sbf_init+0x0/0xc8 returned 0 after 0 usecs
[ 0.440063] calling arch_kdebugfs_init+0x0/0x23 @ 1
[ 0.440080] initcall arch_kdebugfs_init+0x0/0x23 returned 0 after 0 usecs
[ 0.440084] calling init_pit_clocksource+0x0/0x37 @ 1
[ 0.440088] initcall init_pit_clocksource+0x0/0x37 returned 0 after 0 usecs
[ 0.440093] calling intel_pconfig_init+0x0/0xbb @ 1
[ 0.440097] initcall intel_pconfig_init+0x0/0xbb returned 0 after 0 usecs
[ 0.440101] calling mtrr_if_init+0x0/0x51 @ 1
[ 0.440110] initcall mtrr_if_init+0x0/0x51 returned 0 after 0 usecs
[ 0.440114] calling ffh_cstate_init+0x0/0x2d @ 1
[ 0.440125] initcall ffh_cstate_init+0x0/0x2d returned 0 after 0 usecs
[ 0.440130] calling kdump_buf_page_init+0x0/0x3b @ 1
[ 0.440134] initcall kdump_buf_page_init+0x0/0x3b returned 0 after 0 usecs
[ 0.440139] calling acpi_pci_init+0x0/0x5b @ 1
[ 0.440141] ACPI: bus type PCI registered
[ 0.440146] initcall acpi_pci_init+0x0/0x5b returned 0 after 0 usecs
[ 0.440150] calling dma_channel_table_init+0x0/0xc2 @ 1
[ 0.440160] initcall dma_channel_table_init+0x0/0xc2 returned 0 after 0 usecs
[ 0.440163] calling dma_bus_init+0x0/0x91 @ 1
[ 0.440197] initcall dma_bus_init+0x0/0x91 returned 0 after 0 usecs
[ 0.440200] calling dmi_id_init+0x0/0x2b8 @ 1
[ 0.440272] initcall dmi_id_init+0x0/0x2b8 returned 0 after 0 usecs
[ 0.440275] calling pci_arch_init+0x0/0x6b @ 1
[ 0.440876] PCI: Using configuration type 1 for base access
[ 0.440878] PCI: Using configuration type 1 for extended access
[ 0.440891] initcall pci_arch_init+0x0/0x6b returned 0 after 1953 usecs
[ 0.441113] calling fixup_ht_bug+0x0/0x8e @ 1
[ 0.441116] initcall fixup_ht_bug+0x0/0x8e returned 0 after 0 usecs
[ 0.441121] calling topology_init+0x0/0x30 @ 1
[ 0.441257] initcall topology_init+0x0/0x30 returned 0 after 0 usecs
[ 0.441263] calling mtrr_init_finialize+0x0/0x41 @ 1
[ 0.441265] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.441266] mtrr: probably your BIOS does not setup all CPUs.
[ 0.441267] mtrr: corrected configuration.
[ 0.441271] initcall mtrr_init_finialize+0x0/0x41 returned 0 after 0 usecs
[ 0.441274] calling uid_cache_init+0x0/0x7b @ 1
[ 0.441283] initcall uid_cache_init+0x0/0x7b returned 0 after 0 usecs
[ 0.441286] calling param_sysfs_init+0x0/0x196 @ 1
[ 0.444940] initcall param_sysfs_init+0x0/0x196 returned 0 after 3906 usecs
[ 0.444944] calling user_namespace_sysctl_init+0x0/0x40 @ 1
[ 0.444968] initcall user_namespace_sysctl_init+0x0/0x40 returned 0 after 0 usecs
[ 0.444971] calling proc_schedstat_init+0x0/0x23 @ 1
[ 0.444978] initcall proc_schedstat_init+0x0/0x23 returned 0 after 0 usecs
[ 0.444982] calling pm_sysrq_init+0x0/0x1b @ 1
[ 0.445794] initcall pm_sysrq_init+0x0/0x1b returned 0 after 0 usecs
[ 0.445794] calling create_proc_profile+0x0/0x100 @ 1
[ 0.445794] initcall create_proc_profile+0x0/0x100 returned 0 after 0 usecs
[ 0.445794] calling crash_save_vmcoreinfo_init+0x0/0x4e1 @ 1
[ 0.445815] initcall crash_save_vmcoreinfo_init+0x0/0x4e1 returned 0 after 0 usecs
[ 0.445819] calling crash_notes_memory_init+0x0/0x36 @ 1
[ 0.445831] initcall crash_notes_memory_init+0x0/0x36 returned 0 after 0 usecs
[ 0.445836] calling cgroup_sysfs_init+0x0/0x19 @ 1
[ 0.445846] initcall cgroup_sysfs_init+0x0/0x19 returned 0 after 0 usecs
[ 0.445850] calling cgroup_namespaces_init+0x0/0xc @ 1
[ 0.445854] initcall cgroup_namespaces_init+0x0/0xc returned 0 after 0 usecs
[ 0.445858] calling user_namespaces_init+0x0/0x2c @ 1
[ 0.445886] initcall user_namespaces_init+0x0/0x2c returned 0 after 0 usecs
[ 0.445889] calling dev_map_init+0x0/0x16 @ 1
[ 0.445894] initcall dev_map_init+0x0/0x16 returned 0 after 0 usecs
[ 0.445898] calling stack_map_init+0x0/0x40 @ 1
[ 0.445901] initcall stack_map_init+0x0/0x40 returned 0 after 0 usecs
[ 0.445904] calling oom_init+0x0/0x2e @ 1
[ 0.445915] initcall oom_init+0x0/0x2e returned 0 after 0 usecs
[ 0.445915] calling default_bdi_init+0x0/0xa7 @ 1
[ 0.445915] initcall default_bdi_init+0x0/0xa7 returned 0 after 0 usecs
[ 0.445915] calling cgwb_init+0x0/0x2c @ 1
[ 0.445915] initcall cgwb_init+0x0/0x2c returned 0 after 0 usecs
[ 0.445915] calling percpu_enable_async+0x0/0x13 @ 1
[ 0.445915] initcall percpu_enable_async+0x0/0x13 returned 0 after 0 usecs
[ 0.445915] calling kcompactd_init+0x0/0x49 @ 1
[ 0.445915] initcall kcompactd_init+0x0/0x49 returned 0 after 0 usecs
[ 0.445915] calling init_user_reserve+0x0/0x40 @ 1
[ 0.445915] initcall init_user_reserve+0x0/0x40 returned 0 after 0 usecs
[ 0.445915] calling init_admin_reserve+0x0/0x40 @ 1
[ 0.445915] initcall init_admin_reserve+0x0/0x40 returned 0 after 0 usecs
[ 0.445915] calling init_reserve_notifier+0x0/0x3 @ 1
[ 0.445915] initcall init_reserve_notifier+0x0/0x3 returned 0 after 0 usecs
[ 0.445915] calling swap_init_sysfs+0x0/0x5d @ 1
[ 0.445915] initcall swap_init_sysfs+0x0/0x5d returned 0 after 0 usecs
[ 0.445915] calling swapfile_init+0x0/0x40 @ 1
[ 0.445915] initcall swapfile_init+0x0/0x40 returned 0 after 0 usecs
[ 0.445915] calling hugetlb_init+0x0/0x3ba @ 1
[ 0.445915] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.445915] initcall hugetlb_init+0x0/0x3ba returned 0 after 0 usecs
[ 0.445915] calling ksm_init+0x0/0x154 @ 1
[ 0.445915] initcall ksm_init+0x0/0x154 returned 0 after 0 usecs
[ 0.445915] calling hugepage_init+0x0/0x12e @ 1
[ 0.446771] initcall hugepage_init+0x0/0x12e returned 0 after 976 usecs
[ 0.446779] calling mem_cgroup_init+0x0/0xc0 @ 1
[ 0.446804] initcall mem_cgroup_init+0x0/0xc0 returned 0 after 0 usecs
[ 0.446808] calling mem_cgroup_swap_init+0x0/0x4e @ 1
[ 0.446817] initcall mem_cgroup_swap_init+0x0/0x4e returned 0 after 0 usecs
[ 0.446821] calling sel_ib_pkey_init+0x0/0x30 @ 1
[ 0.446824] initcall sel_ib_pkey_init+0x0/0x30 returned 0 after 0 usecs
[ 0.446828] calling crypto_wq_init+0x0/0x2c @ 1
[ 0.446875] initcall crypto_wq_init+0x0/0x2c returned 0 after 0 usecs
[ 0.446875] calling cryptomgr_init+0x0/0x14 @ 1
[ 0.446875] initcall cryptomgr_init+0x0/0x14 returned 0 after 0 usecs
[ 0.446875] calling cryptd_init+0x0/0xa2 @ 1
[ 0.446875] cryptd: max_cpu_qlen set to 1000
[ 0.446875] initcall cryptd_init+0x0/0xa2 returned 0 after 0 usecs
[ 0.446875] calling init_bio+0x0/0xbe @ 1
[ 0.446875] initcall init_bio+0x0/0xbe returned 0 after 0 usecs
[ 0.446875] calling blk_settings_init+0x0/0x22 @ 1
[ 0.446875] initcall blk_settings_init+0x0/0x22 returned 0 after 0 usecs
[ 0.446875] calling blk_ioc_init+0x0/0x29 @ 1
[ 0.446875] initcall blk_ioc_init+0x0/0x29 returned 0 after 0 usecs
[ 0.446875] calling blk_softirq_init+0x0/0x63 @ 1
[ 0.446875] initcall blk_softirq_init+0x0/0x63 returned 0 after 0 usecs
[ 0.446875] calling blk_mq_init+0x0/0x26 @ 1
[ 0.446875] initcall blk_mq_init+0x0/0x26 returned 0 after 0 usecs
[ 0.446875] calling genhd_device_init+0x0/0x66 @ 1
[ 0.446907] initcall genhd_device_init+0x0/0x66 returned 0 after 0 usecs
[ 0.446907] calling irq_poll_setup+0x0/0x5e @ 1
[ 0.446907] initcall irq_poll_setup+0x0/0x5e returned 0 after 0 usecs
[ 0.446907] calling byt_gpio_init+0x0/0x16 @ 1
[ 0.446907] initcall byt_gpio_init+0x0/0x16 returned 0 after 0 usecs
[ 0.446907] calling gpiolib_debugfs_init+0x0/0x24 @ 1
[ 0.446907] initcall gpiolib_debugfs_init+0x0/0x24 returned 0 after 0 usecs
[ 0.446907] calling pwm_debugfs_init+0x0/0x24 @ 1
[ 0.446907] initcall pwm_debugfs_init+0x0/0x24 returned 0 after 0 usecs
[ 0.446907] calling pwm_sysfs_init+0x0/0x19 @ 1
[ 0.446907] initcall pwm_sysfs_init+0x0/0x19 returned 0 after 0 usecs
[ 0.446907] calling pci_slot_init+0x0/0x40 @ 1
[ 0.446907] initcall pci_slot_init+0x0/0x40 returned 0 after 0 usecs
[ 0.446907] calling fbmem_init+0x0/0xcc @ 1
[ 0.446922] initcall fbmem_init+0x0/0xcc returned 0 after 0 usecs
[ 0.446927] calling scan_for_dmi_ipmi+0x0/0x10f @ 1
[ 0.446931] initcall scan_for_dmi_ipmi+0x0/0x10f returned 0 after 0 usecs
[ 0.446936] calling acpi_init+0x0/0x2e2 @ 1
[ 0.446966] ACPI: Added _OSI(Module Device)
[ 0.446968] ACPI: Added _OSI(Processor Device)
[ 0.446970] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.446971] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.446974] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.446976] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.459112] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.463100] ACPI: Interpreter enabled
[ 0.463145] ACPI: (supports S0 S1 S3 S5)
[ 0.463147] ACPI: Using IOAPIC for interrupt routing
[ 0.463186] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.463591] ACPI: Enabled 19 GPEs in block 00 to 1F
[ 0.473708] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.473723] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.473902] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability LTR]
[ 0.474355] PCI host bridge to bus 0000:00
[ 0.474361] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.474364] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.474368] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.474371] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
[ 0.474375] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.474395] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
[ 0.474407] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x10 @ 1
[ 0.474413] pci 0000:00:00.0: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[ 0.474691] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000
[ 0.474715] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
[ 0.474725] pci 0000:00:01.0: reg 0x14: [io 0x2000-0x20ff]
[ 0.474735] pci 0000:00:01.0: reg 0x18: [mem 0xf0100000-0xf013ffff]
[ 0.474776] pci 0000:00:01.0: enabling Extended Tags
[ 0.474797] pci 0000:00:01.0: calling quirk_no_pm_reset+0x0/0x20 @ 1
[ 0.474802] pci 0000:00:01.0: quirk_no_pm_reset+0x0/0x20 took 0 usecs
[ 0.474838] pci 0000:00:01.0: supports D1 D2
[ 0.475076] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300
[ 0.475099] pci 0000:00:01.1: reg 0x10: [mem 0xf0140000-0xf0143fff]
[ 0.475141] pci 0000:00:01.1: enabling Extended Tags
[ 0.475190] pci 0000:00:01.1: supports D1 D2
[ 0.475523] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.475552] pci 0000:00:11.0: reg 0x10: [io 0x2410-0x2417]
[ 0.475566] pci 0000:00:11.0: reg 0x14: [io 0x2420-0x2423]
[ 0.475580] pci 0000:00:11.0: reg 0x18: [io 0x2418-0x241f]
[ 0.475594] pci 0000:00:11.0: reg 0x1c: [io 0x2424-0x2427]
[ 0.475607] pci 0000:00:11.0: reg 0x20: [io 0x2400-0x240f]
[ 0.475621] pci 0000:00:11.0: reg 0x24: [mem 0xf014b000-0xf014b3ff]
[ 0.475977] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.476003] pci 0000:00:12.0: reg 0x10: [mem 0xf0148000-0xf0148fff]
[ 0.476377] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.476407] pci 0000:00:12.2: reg 0x10: [mem 0xf014c000-0xf014c0ff]
[ 0.476517] pci 0000:00:12.2: supports D1 D2
[ 0.476520] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.476837] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.476863] pci 0000:00:13.0: reg 0x10: [mem 0xf0149000-0xf0149fff]
[ 0.477232] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.477262] pci 0000:00:13.2: reg 0x10: [mem 0xf014d000-0xf014d0ff]
[ 0.477372] pci 0000:00:13.2: supports D1 D2
[ 0.477375] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.477681] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.477690] pci 0000:00:14.0: calling sb600_disable_hpet_bar+0x0/0x80 @ 1
[ 0.477697] pci 0000:00:14.0: sb600_disable_hpet_bar+0x0/0x80 took 0 usecs
[ 0.477799] pci 0000:00:14.0: calling force_disable_hpet_msi+0x0/0x20 @ 1
[ 0.477803] pci 0000:00:14.0: force_disable_hpet_msi+0x0/0x20 took 0 usecs
[ 0.477809] pci 0000:00:14.0: calling sb600_hpet_quirk+0x0/0x80 @ 1
[ 0.477814] pci 0000:00:14.0: sb600_hpet_quirk+0x0/0x80 took 0 usecs
[ 0.478104] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.478139] pci 0000:00:14.2: reg 0x10: [mem 0xf0144000-0xf0147fff 64bit]
[ 0.478233] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.478529] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.478920] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.479277] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.479303] pci 0000:00:14.5: reg 0x10: [mem 0xf014a000-0xf014afff]
[ 0.479682] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[ 0.479744] pci 0000:00:15.0: enabling Extended Tags
[ 0.479820] pci 0000:00:15.0: supports D1 D2
[ 0.480140] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
[ 0.480200] pci 0000:00:15.1: enabling Extended Tags
[ 0.480272] pci 0000:00:15.1: supports D1 D2
[ 0.480600] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
[ 0.480609] pci 0000:00:18.0: calling quirk_mmio_always_on+0x0/0x10 @ 1
[ 0.480614] pci 0000:00:18.0: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[ 0.480872] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
[ 0.480881] pci 0000:00:18.1: calling quirk_mmio_always_on+0x0/0x10 @ 1
[ 0.480886] pci 0000:00:18.1: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[ 0.481127] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
[ 0.481136] pci 0000:00:18.2: calling quirk_mmio_always_on+0x0/0x10 @ 1
[ 0.481140] pci 0000:00:18.2: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[ 0.481383] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
[ 0.481392] pci 0000:00:18.3: calling quirk_mmio_always_on+0x0/0x10 @ 1
[ 0.481397] pci 0000:00:18.3: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[ 0.481659] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
[ 0.481667] pci 0000:00:18.4: calling quirk_mmio_always_on+0x0/0x10 @ 1
[ 0.481672] pci 0000:00:18.4: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[ 0.481921] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
[ 0.481930] pci 0000:00:18.5: calling quirk_mmio_always_on+0x0/0x10 @ 1
[ 0.481935] pci 0000:00:18.5: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[ 0.482176] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
[ 0.482184] pci 0000:00:18.6: calling quirk_mmio_always_on+0x0/0x10 @ 1
[ 0.482189] pci 0000:00:18.6: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[ 0.482426] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
[ 0.482435] pci 0000:00:18.7: calling quirk_mmio_always_on+0x0/0x10 @ 1
[ 0.482439] pci 0000:00:18.7: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[ 0.482778] pci_bus 0000:01: extended config space not accessible
[ 0.482953] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
[ 0.482967] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.482970] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.482974] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.482977] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
[ 0.483056] pci 0000:00:15.0: PCI bridge to [bus 02]
[ 0.483169] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.483212] pci 0000:03:00.0: reg 0x10: [io 0x1000-0x10ff]
[ 0.483252] pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
[ 0.483277] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.483423] pci 0000:03:00.0: supports D1 D2
[ 0.483426] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.483486] pci 0000:03:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:15.1 (capable of 7.876 Gb/s with 8 GT/s x1 link)
[ 0.486853] pci 0000:00:15.1: PCI bridge to [bus 03]
[ 0.486871] pci 0000:00:15.1: bridge window [io 0x1000-0x1fff]
[ 0.486889] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.486934] pci_bus 0000:00: on NUMA node 0
[ 0.488532] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.488873] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.489197] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.489521] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.489853] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.490181] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0, disabled.
[ 0.490500] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.490778] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.491742] initcall acpi_init+0x0/0x2e2 returned 0 after 43945 usecs
[ 0.491742] calling pnp_init+0x0/0x14 @ 1
[ 0.491742] initcall pnp_init+0x0/0x14 returned 0 after 0 usecs
[ 0.491742] calling misc_init+0x0/0xae @ 1
[ 0.491742] initcall misc_init+0x0/0xae returned 0 after 0 usecs
[ 0.491742] calling vga_arb_device_init+0x0/0x231 @ 1
[ 0.491808] pci 0000:00:01.0: vgaarb: setting as boot VGA device
[ 0.491808] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.491812] pci 0000:00:01.0: vgaarb: bridge control possible
[ 0.491815] vgaarb: loaded
[ 0.491825] initcall vga_arb_device_init+0x0/0x231 returned 0 after 0 usecs
[ 0.491833] calling cn_init+0x0/0xd0 @ 1
[ 0.491870] initcall cn_init+0x0/0xd0 returned 0 after 0 usecs
[ 0.491875] calling dax_fs_init+0x0/0xab @ 1
[ 0.491905] initcall dax_fs_init+0x0/0xab returned 0 after 0 usecs
[ 0.491905] calling dma_buf_init+0x0/0x99 @ 1
[ 0.491905] initcall dma_buf_init+0x0/0x99 returned 0 after 0 usecs
[ 0.491905] calling init_scsi+0x0/0x90 @ 1
[ 0.491946] SCSI subsystem initialized
[ 0.491951] initcall init_scsi+0x0/0x90 returned 0 after 976 usecs
[ 0.491955] calling ata_init+0x0/0x2a7 @ 1
[ 0.492788] libata version 3.00 loaded.
[ 0.492788] initcall ata_init+0x0/0x2a7 returned 0 after 0 usecs
[ 0.492788] calling phy_init+0x0/0x4c @ 1
[ 0.492819] initcall phy_init+0x0/0x4c returned 0 after 0 usecs
[ 0.492823] calling usb_init+0x0/0x11b @ 1
[ 0.492832] ACPI: bus type USB registered
[ 0.492875] usbcore: registered new interface driver usbfs
[ 0.492892] usbcore: registered new interface driver hub
[ 0.492926] usbcore: registered new device driver usb
[ 0.492930] initcall usb_init+0x0/0x11b returned 0 after 0 usecs
[ 0.492934] calling serio_init+0x0/0x2d @ 1
[ 0.492955] initcall serio_init+0x0/0x2d returned 0 after 0 usecs
[ 0.492959] calling input_init+0x0/0xe3 @ 1
[ 0.492973] initcall input_init+0x0/0xe3 returned 0 after 0 usecs
[ 0.492977] calling rtc_init+0x0/0x47 @ 1
[ 0.492987] initcall rtc_init+0x0/0x47 returned 0 after 0 usecs
[ 0.492992] calling power_supply_class_init+0x0/0x3a @ 1
[ 0.493001] initcall power_supply_class_init+0x0/0x3a returned 0 after 0 usecs
[ 0.493005] calling hwmon_init+0x0/0xd5 @ 1
[ 0.493017] initcall hwmon_init+0x0/0xd5 returned 0 after 0 usecs
[ 0.493022] calling leds_init+0x0/0x37 @ 1
[ 0.493030] initcall leds_init+0x0/0x37 returned 0 after 0 usecs
[ 0.493035] calling dmi_init+0x0/0xf8 @ 1
[ 0.493062] initcall dmi_init+0x0/0xf8 returned 0 after 0 usecs
[ 0.493065] calling devfreq_init+0x0/0x90 @ 1
[ 0.493123] initcall devfreq_init+0x0/0x90 returned 0 after 0 usecs
[ 0.493123] calling ras_init+0x0/0x14 @ 1
[ 0.493123] initcall ras_init+0x0/0x14 returned 0 after 0 usecs
[ 0.493123] calling nvmem_init+0x0/0x14 @ 1
[ 0.493123] initcall nvmem_init+0x0/0x14 returned 0 after 0 usecs
[ 0.493123] calling pci_subsys_init+0x0/0x65 @ 1
[ 0.493123] PCI: Using ACPI for IRQ routing
[ 0.493123] PCI: pci_cache_line_size set to 64 bytes
[ 0.493123] e820: reserve RAM buffer [mem 0xc7d3c000-0xc7ffffff]
[ 0.493123] e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff]
[ 0.493123] initcall pci_subsys_init+0x0/0x65 returned 0 after 0 usecs
[ 0.493123] calling proto_init+0x0/0x14 @ 1
[ 0.493123] initcall proto_init+0x0/0x14 returned 0 after 0 usecs
[ 0.493123] calling net_dev_init+0x0/0x1e9 @ 1
[ 0.493123] initcall net_dev_init+0x0/0x1e9 returned 0 after 976 usecs
[ 0.493123] calling neigh_init+0x0/0x78 @ 1
[ 0.493123] initcall neigh_init+0x0/0x78 returned 0 after 0 usecs
[ 0.493123] calling fib_notifier_init+0x0/0x14 @ 1
[ 0.493123] initcall fib_notifier_init+0x0/0x14 returned 0 after 0 usecs
[ 0.493123] calling fib_rules_init+0x0/0xa6 @ 1
[ 0.493123] initcall fib_rules_init+0x0/0xa6 returned 0 after 0 usecs
[ 0.493123] calling init_cgroup_netprio+0x0/0x16 @ 1
[ 0.493123] initcall init_cgroup_netprio+0x0/0x16 returned 0 after 0 usecs
[ 0.493123] calling bpf_lwt_init+0x0/0x19 @ 1
[ 0.493123] initcall bpf_lwt_init+0x0/0x19 returned 0 after 0 usecs
[ 0.493123] calling pktsched_init+0x0/0xf6 @ 1
[ 0.493123] initcall pktsched_init+0x0/0xf6 returned 0 after 0 usecs
[ 0.493123] calling tc_filter_init+0x0/0xe3 @ 1
[ 0.493745] initcall tc_filter_init+0x0/0xe3 returned 0 after 0 usecs
[ 0.493745] calling tc_action_init+0x0/0x65 @ 1
[ 0.493745] initcall tc_action_init+0x0/0x65 returned 0 after 0 usecs
[ 0.493745] calling genl_init+0x0/0x33 @ 1
[ 0.493745] initcall genl_init+0x0/0x33 returned 0 after 0 usecs
[ 0.493745] calling nmi_warning_debugfs+0x0/0x26 @ 1
[ 0.493745] initcall nmi_warning_debugfs+0x0/0x26 returned 0 after 0 usecs
[ 0.493745] calling hpet_late_init+0x0/0xf6 @ 1
[ 0.493745] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.493745] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.495744] initcall hpet_late_init+0x0/0xf6 returned 0 after 1953 usecs
[ 0.495749] calling init_amd_nbs+0x0/0x103 @ 1
[ 0.495790] initcall init_amd_nbs+0x0/0x103 returned 0 after 0 usecs
[ 0.495795] calling sugov_register+0x0/0x14 @ 1
[ 0.495799] initcall sugov_register+0x0/0x14 returned 0 after 0 usecs
[ 0.495804] calling clocksource_done_booting+0x0/0x40 @ 1
[ 0.495828] clocksource: Switched to clocksource tsc-early
[ 0.495832] initcall clocksource_done_booting+0x0/0x40 returned 0 after 10 usecs
[ 0.495837] initcall tracer_init_tracefs blacklisted
[ 0.495841] calling init_trace_printk_function_export+0x0/0x2d @ 1
[ 0.495873] initcall init_trace_printk_function_export+0x0/0x2d returned 0 after 27 usecs
[ 0.495877] calling init_graph_tracefs+0x0/0x2d @ 1
[ 0.495892] initcall init_graph_tracefs+0x0/0x2d returned 0 after 11 usecs
[ 0.495896] calling init_kprobe_trace+0x0/0x83 @ 1
[ 0.495904] initcall init_kprobe_trace+0x0/0x83 returned 0 after 5 usecs
[ 0.495907] calling init_uprobe_trace+0x0/0x4c @ 1
[ 0.495915] initcall init_uprobe_trace+0x0/0x4c returned 0 after 4 usecs
[ 0.495918] calling bpf_init+0x0/0x42 @ 1
[ 0.495925] initcall bpf_init+0x0/0x42 returned 0 after 4 usecs
[ 0.495929] calling init_pipe_fs+0x0/0x42 @ 1
[ 0.495943] initcall init_pipe_fs+0x0/0x42 returned 0 after 10 usecs
[ 0.495947] calling cgroup_writeback_init+0x0/0x2c @ 1
[ 0.495968] initcall cgroup_writeback_init+0x0/0x2c returned 0 after 16 usecs
[ 0.495972] calling inotify_user_setup+0x0/0x4a @ 1
[ 0.495994] initcall inotify_user_setup+0x0/0x4a returned 0 after 18 usecs
[ 0.495998] calling eventpoll_init+0x0/0xab @ 1
[ 0.496016] initcall eventpoll_init+0x0/0xab returned 0 after 14 usecs
[ 0.496019] calling anon_inode_init+0x0/0x4e @ 1
[ 0.496034] initcall anon_inode_init+0x0/0x4e returned 0 after 10 usecs
[ 0.496038] calling init_dax_wait_table+0x0/0x2f @ 1
[ 0.496048] initcall init_dax_wait_table+0x0/0x2f returned 0 after 35 usecs
[ 0.496048] calling proc_locks_init+0x0/0x23 @ 1
[ 0.496048] initcall proc_locks_init+0x0/0x23 returned 0 after 3 usecs
[ 0.496048] calling dquot_init+0x0/0xfa @ 1
[ 0.496048] VFS: Disk quotas dquot_6.6.0
[ 0.496048] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.496051] initcall dquot_init+0x0/0xfa returned 0 after 34 usecs
[ 0.496054] calling quota_init+0x0/0x25 @ 1
[ 0.496071] initcall quota_init+0x0/0x25 returned 0 after 13 usecs
[ 0.496075] calling proc_cmdline_init+0x0/0x21 @ 1
[ 0.496081] initcall proc_cmdline_init+0x0/0x21 returned 0 after 2 usecs
[ 0.496085] calling proc_consoles_init+0x0/0x23 @ 1
[ 0.496089] initcall proc_consoles_init+0x0/0x23 returned 0 after 1 usecs
[ 0.496093] calling proc_cpuinfo_init+0x0/0x1f @ 1
[ 0.496098] initcall proc_cpuinfo_init+0x0/0x1f returned 0 after 1 usecs
[ 0.496101] calling proc_devices_init+0x0/0x23 @ 1
[ 0.496106] initcall proc_devices_init+0x0/0x23 returned 0 after 1 usecs
[ 0.496109] calling proc_interrupts_init+0x0/0x23 @ 1
[ 0.496114] initcall proc_interrupts_init+0x0/0x23 returned 0 after 1 usecs
[ 0.496118] calling proc_loadavg_init+0x0/0x21 @ 1
[ 0.496127] initcall proc_loadavg_init+0x0/0x21 returned 0 after 5 usecs
[ 0.496131] calling proc_meminfo_init+0x0/0x21 @ 1
[ 0.496135] initcall proc_meminfo_init+0x0/0x21 returned 0 after 1 usecs
[ 0.496139] calling proc_stat_init+0x0/0x1f @ 1
[ 0.496143] initcall proc_stat_init+0x0/0x1f returned 0 after 1 usecs
[ 0.496147] calling proc_uptime_init+0x0/0x21 @ 1
[ 0.496152] initcall proc_uptime_init+0x0/0x21 returned 0 after 1 usecs
[ 0.496156] calling proc_version_init+0x0/0x21 @ 1
[ 0.496161] initcall proc_version_init+0x0/0x21 returned 0 after 1 usecs
[ 0.496164] calling proc_softirqs_init+0x0/0x21 @ 1
[ 0.496169] initcall proc_softirqs_init+0x0/0x21 returned 0 after 1 usecs
[ 0.496173] calling proc_kcore_init+0x0/0x6e @ 1
[ 0.496179] initcall proc_kcore_init+0x0/0x6e returned 0 after 2 usecs
[ 0.496183] calling vmcore_init+0x0/0x679 @ 1
[ 0.496187] initcall vmcore_init+0x0/0x679 returned 0 after 0 usecs
[ 0.496191] calling proc_kmsg_init+0x0/0x22 @ 1
[ 0.496195] initcall proc_kmsg_init+0x0/0x22 returned 0 after 1 usecs
[ 0.496199] calling proc_page_init+0x0/0x4e @ 1
[ 0.496206] initcall proc_page_init+0x0/0x4e returned 0 after 3 usecs
[ 0.496212] calling init_ramfs_fs+0x0/0x23 @ 1
[ 0.496216] initcall init_ramfs_fs+0x0/0x23 returned 0 after 0 usecs
[ 0.496220] calling init_hugetlbfs_fs+0x0/0x142 @ 1
[ 0.496264] initcall init_hugetlbfs_fs+0x0/0x142 returned 0 after 37 usecs
[ 0.496269] calling blk_scsi_ioctl_init+0x0/0x352 @ 1
[ 0.496273] initcall blk_scsi_ioctl_init+0x0/0x352 returned 0 after 1 usecs
[ 0.496277] calling dynamic_debug_init_debugfs+0x0/0x5f @ 1
[ 0.496290] initcall dynamic_debug_init_debugfs+0x0/0x5f returned 0 after 8 usecs
[ 0.496295] calling acpi_event_init+0x0/0x31 @ 1
[ 0.496307] initcall acpi_event_init+0x0/0x31 returned 0 after 7 usecs
[ 0.496310] calling pnp_system_init+0x0/0x14 @ 1
[ 0.496331] initcall pnp_system_init+0x0/0x14 returned 0 after 17 usecs
[ 0.496334] calling pnpacpi_init+0x0/0x67 @ 1
[ 0.496336] pnp: PnP ACPI init
[ 0.497134] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.497237] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.497317] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.498002] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.498080] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.498110] pnp: PnP ACPI: found 5 devices
[ 0.498115] initcall pnpacpi_init+0x0/0x67 returned 0 after 1734 usecs
[ 0.498119] calling chr_dev_init+0x0/0x9b @ 1
[ 0.502747] initcall chr_dev_init+0x0/0x9b returned 0 after 4507 usecs
[ 0.502757] calling firmware_class_init+0x0/0xe0 @ 1
[ 0.502763] initcall firmware_class_init+0x0/0xe0 returned 0 after 2 usecs
[ 0.502768] calling thermal_init+0x0/0xce @ 1
[ 0.502806] initcall thermal_init+0x0/0xce returned 0 after 32 usecs
[ 0.502812] calling cpufreq_gov_performance_init+0x0/0x14 @ 1
[ 0.502816] initcall cpufreq_gov_performance_init+0x0/0x14 returned 0 after 0 usecs
[ 0.502821] calling cpufreq_gov_dbs_init+0x0/0x14 @ 1
[ 0.502825] initcall cpufreq_gov_dbs_init+0x0/0x14 returned 0 after 0 usecs
[ 0.502829] calling pcibios_assign_resources+0x0/0x96 @ 1
[ 0.502947] pci 0000:00:14.4: PCI bridge to [bus 01]
[ 0.502987] pci 0000:00:15.0: PCI bridge to [bus 02]
[ 0.503003] pci 0000:00:15.1: PCI bridge to [bus 03]
[ 0.503007] pci 0000:00:15.1: bridge window [io 0x1000-0x1fff]
[ 0.503018] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.503031] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.503034] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.503037] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.503040] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff]
[ 0.503044] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window]
[ 0.503047] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window]
[ 0.503049] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.503052] pci_bus 0000:01: resource 7 [mem 0xe0000000-0xffffffff]
[ 0.503056] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.503059] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.503150] initcall pcibios_assign_resources+0x0/0x96 returned 0 after 309 usecs
[ 0.503154] calling sysctl_core_init+0x0/0x28 @ 1
[ 0.503183] initcall sysctl_core_init+0x0/0x28 returned 0 after 25 usecs
[ 0.503188] calling eth_offload_init+0x0/0x16 @ 1
[ 0.503192] initcall eth_offload_init+0x0/0x16 returned 0 after 0 usecs
[ 0.503196] calling ipv4_offload_init+0x0/0x6e @ 1
[ 0.503200] initcall ipv4_offload_init+0x0/0x6e returned 0 after 1 usecs
[ 0.503204] calling inet_init+0x0/0x240 @ 1
[ 0.503255] NET: Registered protocol family 2
[ 0.503572] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[ 0.503581] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.503609] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.503645] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.503705] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.503718] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.503798] initcall inet_init+0x0/0x240 returned 0 after 572 usecs
[ 0.503803] calling af_unix_init+0x0/0x4c @ 1
[ 0.503816] NET: Registered protocol family 1
[ 0.503834] initcall af_unix_init+0x0/0x4c returned 0 after 26 usecs
[ 0.503839] calling ipv6_offload_init+0x0/0x77 @ 1
[ 0.503845] initcall ipv6_offload_init+0x0/0x77 returned 0 after 1 usecs
[ 0.503850] calling pci_apply_final_quirks+0x0/0x118 @ 1
[ 0.503869] pci 0000:00:01.0: calling pci_fixup_video+0x0/0x110 @ 1
[ 0.503877] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.503881] pci 0000:00:01.0: pci_fixup_video+0x0/0x110 took 7 usecs
[ 0.503891] pci 0000:00:01.1: calling quirk_gpu_hda+0x0/0xb0 @ 1
[ 0.503898] pci 0000:00:01.1: Linked as a consumer to 0000:00:01.0
[ 0.503914] pci 0000:00:01.1: quirk_gpu_hda+0x0/0xb0 took 18 usecs
[ 0.503922] pci 0000:00:11.0: calling quirk_msi_intx_disable_ati_bug+0x0/0x50 @ 1
[ 0.503928] pci 0000:00:11.0: quirk_msi_intx_disable_ati_bug+0x0/0x50 took 2 usecs
[ 0.504039] pci 0000:00:12.0: calling quirk_usb_early_handoff+0x0/0x6f7 @ 1
[ 0.504798] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6f7 took 733 usecs
[ 0.504878] pci 0000:00:12.2: calling quirk_usb_early_handoff+0x0/0x6f7 @ 1
[ 0.505374] pci 0000:00:12.2: quirk_usb_early_handoff+0x0/0x6f7 took 478 usecs
[ 0.505453] pci 0000:00:13.0: calling quirk_usb_early_handoff+0x0/0x6f7 @ 1
[ 0.505930] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x6f7 took 459 usecs
[ 0.506017] pci 0000:00:13.2: calling quirk_usb_early_handoff+0x0/0x6f7 @ 1
[ 0.506496] pci 0000:00:13.2: quirk_usb_early_handoff+0x0/0x6f7 took 460 usecs
[ 0.506579] pci 0000:00:14.2: calling quirk_gpu_hda+0x0/0xb0 @ 1
[ 0.506583] pci 0000:00:14.2: quirk_gpu_hda+0x0/0xb0 took 0 usecs
[ 0.506601] pci 0000:00:14.5: calling quirk_usb_early_handoff+0x0/0x6f7 @ 1
[ 0.507094] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x6f7 took 474 usecs
[ 0.507216] PCI: CLS 64 bytes, default 64
[ 0.507220] initcall pci_apply_final_quirks+0x0/0x118 returned 0 after 3287 usecs
[ 0.507226] calling acpi_reserve_resources+0x0/0xcd @ 1
[ 0.507235] initcall acpi_reserve_resources+0x0/0xcd returned 0 after 5 usecs
[ 0.507239] calling populate_rootfs+0x0/0xf9 @ 1
[ 0.507343] initcall populate_rootfs+0x0/0xf9 returned 0 after 97 usecs
[ 0.507348] calling pci_iommu_init+0x0/0x3a @ 1
[ 0.507353] initcall pci_iommu_init+0x0/0x3a returned 0 after 1 usecs
[ 0.507589] calling amd_uncore_init+0x0/0x247 @ 1
[ 0.507593] initcall amd_uncore_init+0x0/0x247 returned -19 after 0 usecs
[ 0.507597] calling amd_ibs_init+0x0/0x196 @ 1
[ 0.507600] LVT offset 0 assigned for vector 0x400
[ 0.507654] perf: AMD IBS detected (0x000000ff)
[ 0.507658] initcall amd_ibs_init+0x0/0x196 returned 0 after 56 usecs
[ 0.507661] calling msr_init+0x0/0xb9 @ 1
[ 0.507668] initcall msr_init+0x0/0xb9 returned 0 after 3 usecs
[ 0.507673] calling register_kernel_offset_dumper+0x0/0x1b @ 1
[ 0.507677] initcall register_kernel_offset_dumper+0x0/0x1b returned 0 after 1 usecs
[ 0.507681] calling i8259A_init_ops+0x0/0x25 @ 1
[ 0.507684] initcall i8259A_init_ops+0x0/0x25 returned 0 after 0 usecs
[ 0.507689] calling init_tsc_clocksource+0x0/0xa4 @ 1
[ 0.507697] initcall init_tsc_clocksource+0x0/0xa4 returned 0 after 4 usecs
[ 0.507702] calling add_rtc_cmos+0x0/0xa6 @ 1
[ 0.507707] initcall add_rtc_cmos+0x0/0xa6 returned 0 after 1 usecs
[ 0.507712] calling i8237A_init_ops+0x0/0x3c @ 1
[ 0.507796] initcall i8237A_init_ops+0x0/0x3c returned 0 after 78 usecs
[ 0.507800] calling msr_init+0x0/0xc9 @ 1
[ 0.508290] initcall msr_init+0x0/0xc9 returned 0 after 465 usecs
[ 0.508300] calling cpuid_init+0x0/0xc9 @ 1
[ 0.508710] initcall cpuid_init+0x0/0xc9 returned 0 after 388 usecs
[ 0.508721] calling ioapic_init_ops+0x0/0x16 @ 1
[ 0.508725] initcall ioapic_init_ops+0x0/0x16 returned 0 after 0 usecs
[ 0.508729] calling add_pcspkr+0x0/0x61 @ 1
[ 0.508794] initcall add_pcspkr+0x0/0x61 returned 0 after 59 usecs
[ 0.508800] calling start_periodic_check_for_corruption+0x0/0x40 @ 1
[ 0.508802] Scanning for low memory corruption every 5 seconds
[ 0.508813] initcall start_periodic_check_for_corruption+0x0/0x40 returned 0 after 9 usecs
[ 0.508818] calling sysfb_init+0x0/0x83 @ 1
[ 0.508860] initcall sysfb_init+0x0/0x83 returned 0 after 37 usecs
[ 0.508865] calling pt_dump_init+0x0/0x57 @ 1
[ 0.508869] initcall pt_dump_init+0x0/0x57 returned 0 after 0 usecs
[ 0.508874] calling pt_dump_debug_init+0x0/0x9b @ 1
[ 0.508893] initcall pt_dump_debug_init+0x0/0x9b returned 0 after 14 usecs
[ 0.508898] calling proc_execdomains_init+0x0/0x21 @ 1
[ 0.508908] initcall proc_execdomains_init+0x0/0x21 returned 0 after 6 usecs
[ 0.508913] calling register_warn_debugfs+0x0/0x24 @ 1
[ 0.508920] initcall register_warn_debugfs+0x0/0x24 returned 0 after 2 usecs
[ 0.508924] calling cpuhp_sysfs_init+0x0/0x79 @ 1
[ 0.508945] initcall cpuhp_sysfs_init+0x0/0x79 returned 0 after 16 usecs
[ 0.508949] calling ioresources_init+0x0/0x40 @ 1
[ 0.508955] initcall ioresources_init+0x0/0x40 returned 0 after 3 usecs
[ 0.508959] calling init_sched_debug_procfs+0x0/0x2f @ 1
[ 0.508964] initcall init_sched_debug_procfs+0x0/0x2f returned 0 after 1 usecs
[ 0.508968] calling irq_pm_init_ops+0x0/0x16 @ 1
[ 0.508971] initcall irq_pm_init_ops+0x0/0x16 returned 0 after 0 usecs
[ 0.508976] calling timekeeping_init_ops+0x0/0x16 @ 1
[ 0.508980] initcall timekeeping_init_ops+0x0/0x16 returned 0 after 0 usecs
[ 0.508984] calling init_clocksource_sysfs+0x0/0x24 @ 1
[ 0.509048] initcall init_clocksource_sysfs+0x0/0x24 returned 0 after 58 usecs
[ 0.509053] calling init_timer_list_procfs+0x0/0x2f @ 1
[ 0.509058] initcall init_timer_list_procfs+0x0/0x2f returned 0 after 1 usecs
[ 0.509062] calling alarmtimer_init+0x0/0x114 @ 1
[ 0.509159] probe of alarmtimer returned 1 after 18 usecs
[ 0.509165] initcall alarmtimer_init+0x0/0x114 returned 0 after 95 usecs
[ 0.509169] calling init_posix_timers+0x0/0x29 @ 1
[ 0.509201] initcall init_posix_timers+0x0/0x29 returned 0 after 27 usecs
[ 0.509205] calling clockevents_init_sysfs+0x0/0x9e @ 1
[ 0.509304] initcall clockevents_init_sysfs+0x0/0x9e returned 0 after 92 usecs
[ 0.509309] calling proc_dma_init+0x0/0x21 @ 1
[ 0.509315] initcall proc_dma_init+0x0/0x21 returned 0 after 2 usecs
[ 0.509319] calling proc_modules_init+0x0/0x1f @ 1
[ 0.509324] initcall proc_modules_init+0x0/0x1f returned 0 after 1 usecs
[ 0.509328] calling kallsyms_init+0x0/0x22 @ 1
[ 0.509333] initcall kallsyms_init+0x0/0x22 returned 0 after 1 usecs
[ 0.509338] calling pid_namespaces_init+0x0/0x2c @ 1
[ 0.509345] initcall pid_namespaces_init+0x0/0x2c returned 0 after 3 usecs
[ 0.509350] calling audit_watch_init+0x0/0x38 @ 1
[ 0.509355] initcall audit_watch_init+0x0/0x38 returned 0 after 1 usecs
[ 0.509359] calling audit_fsnotify_init+0x0/0x38 @ 1
[ 0.509363] initcall audit_fsnotify_init+0x0/0x38 returned 0 after 0 usecs
[ 0.509367] calling audit_tree_init+0x0/0x40 @ 1
[ 0.509372] initcall audit_tree_init+0x0/0x40 returned 0 after 1 usecs
[ 0.509376] calling init_kprobes+0x0/0x172 @ 1
[ 0.509515] initcall init_kprobes+0x0/0x172 returned 0 after 131 usecs
[ 0.509520] calling seccomp_sysctl_init+0x0/0x31 @ 1
[ 0.509534] initcall seccomp_sysctl_init+0x0/0x31 returned 0 after 10 usecs
[ 0.509538] calling utsname_sysctl_init+0x0/0x16 @ 1
[ 0.509551] initcall utsname_sysctl_init+0x0/0x16 returned 0 after 8 usecs
[ 0.509555] calling init_tracepoints+0x0/0x2b @ 1
[ 0.509559] initcall init_tracepoints+0x0/0x2b returned 0 after 0 usecs
[ 0.509562] calling stack_trace_init+0x0/0x9e @ 1
[ 0.509576] initcall stack_trace_init+0x0/0x9e returned 0 after 10 usecs
[ 0.509579] calling init_mmio_trace+0x0/0xf @ 1
[ 0.509585] initcall init_mmio_trace+0x0/0xf returned 0 after 3 usecs
[ 0.509587] calling init_blk_tracer+0x0/0x4d @ 1
[ 0.509603] initcall init_blk_tracer+0x0/0x4d returned 0 after 12 usecs
[ 0.509607] calling perf_event_sysfs_init+0x0/0x78 @ 1
[ 0.509862] initcall perf_event_sysfs_init+0x0/0x78 returned 0 after 246 usecs
[ 0.509866] calling init_uprobes+0x0/0x56 @ 1
[ 0.509873] initcall init_uprobes+0x0/0x56 returned 0 after 3 usecs
[ 0.509876] calling padata_driver_init+0x0/0x35 @ 1
[ 0.509880] initcall padata_driver_init+0x0/0x35 returned 0 after 1 usecs
[ 0.509885] calling system_trusted_keyring_init+0x0/0x55 @ 1
[ 0.509886] Initialise system trusted keyrings
[ 0.509899] initcall system_trusted_keyring_init+0x0/0x55 returned 0 after 10 usecs
[ 0.509903] calling kswapd_init+0x0/0x3b @ 1
[ 0.510292] initcall kswapd_init+0x0/0x3b returned 0 after 367 usecs
[ 0.510301] calling extfrag_debug_init+0x0/0x71 @ 1
[ 0.510341] initcall extfrag_debug_init+0x0/0x71 returned 0 after 34 usecs
[ 0.510346] calling mm_compute_batch_init+0x0/0x3e @ 1
[ 0.510350] initcall mm_compute_batch_init+0x0/0x3e returned 0 after 0 usecs
[ 0.510354] calling slab_proc_init+0x0/0x22 @ 1
[ 0.510365] initcall slab_proc_init+0x0/0x22 returned 0 after 7 usecs
[ 0.510369] calling workingset_init+0x0/0x88 @ 1
[ 0.510372] workingset: timestamp_bits=14 max_order=20 bucket_order=6
[ 0.510386] initcall workingset_init+0x0/0x88 returned 0 after 12 usecs
[ 0.510390] calling proc_vmalloc_init+0x0/0x26 @ 1
[ 0.510396] initcall proc_vmalloc_init+0x0/0x26 returned 0 after 2 usecs
[ 0.510401] calling procswaps_init+0x0/0x1f @ 1
[ 0.510406] initcall procswaps_init+0x0/0x1f returned 0 after 1 usecs
[ 0.510411] calling init_frontswap+0x0/0x82 @ 1
[ 0.510426] initcall init_frontswap+0x0/0x82 returned 0 after 10 usecs
[ 0.510429] calling slab_sysfs_init+0x0/0xd0 @ 1
[ 0.513472] initcall slab_sysfs_init+0x0/0xd0 returned 0 after 2966 usecs
[ 0.513477] calling init_cleancache+0x0/0x82 @ 1
[ 0.513495] initcall init_cleancache+0x0/0x82 returned 0 after 14 usecs
[ 0.513498] calling init_zbud+0x0/0x20 @ 1
[ 0.513499] zbud: loaded
[ 0.513503] initcall init_zbud+0x0/0x20 returned 0 after 1 usecs
[ 0.513505] calling zs_init+0x0/0x6d @ 1
[ 0.513537] initcall zs_init+0x0/0x6d returned 0 after 26 usecs
[ 0.513540] calling init_z3fold+0x0/0x16 @ 1
[ 0.513543] initcall init_z3fold+0x0/0x16 returned 0 after 0 usecs
[ 0.513546] calling fcntl_init+0x0/0x29 @ 1
[ 0.513555] initcall fcntl_init+0x0/0x29 returned 0 after 6 usecs
[ 0.513559] calling proc_filesystems_init+0x0/0x21 @ 1
[ 0.513566] initcall proc_filesystems_init+0x0/0x21 returned 0 after 3 usecs
[ 0.513570] calling start_dirtytime_writeback+0x0/0x2c @ 1
[ 0.513575] initcall start_dirtytime_writeback+0x0/0x2c returned 0 after 2 usecs
[ 0.513579] calling blkdev_init+0x0/0x20 @ 1
[ 0.513591] initcall blkdev_init+0x0/0x20 returned 0 after 9 usecs
[ 0.513595] calling dio_init+0x0/0x2c @ 1
[ 0.513650] initcall dio_init+0x0/0x2c returned 0 after 50 usecs
[ 0.513654] calling dnotify_init+0x0/0x6f @ 1
[ 0.513667] initcall dnotify_init+0x0/0x6f returned 0 after 9 usecs
[ 0.513670] calling fanotify_user_setup+0x0/0x6c @ 1
[ 0.513730] initcall fanotify_user_setup+0x0/0x6c returned 0 after 53 usecs
[ 0.513734] calling userfaultfd_init+0x0/0x2c @ 1
[ 0.513778] initcall userfaultfd_init+0x0/0x2c returned 0 after 39 usecs
[ 0.513782] calling aio_setup+0x0/0x6e @ 1
[ 0.513804] initcall aio_setup+0x0/0x6e returned 0 after 17 usecs
[ 0.513808] calling mbcache_init+0x0/0x31 @ 1
[ 0.513858] initcall mbcache_init+0x0/0x31 returned 0 after 44 usecs
[ 0.513862] calling init_v2_quota_format+0x0/0x22 @ 1
[ 0.513866] initcall init_v2_quota_format+0x0/0x22 returned 0 after 0 usecs
[ 0.513870] calling init_devpts_fs+0x0/0x28 @ 1
[ 0.513891] initcall init_devpts_fs+0x0/0x28 returned 0 after 16 usecs
[ 0.513896] calling ext4_init_fs+0x0/0x166 @ 1
[ 0.514107] initcall ext4_init_fs+0x0/0x166 returned 0 after 202 usecs
[ 0.514126] calling journal_init+0x0/0xfc @ 1
[ 0.514249] initcall journal_init+0x0/0xfc returned 0 after 114 usecs
[ 0.514254] calling init_nls_cp437+0x0/0x16 @ 1
[ 0.514260] initcall init_nls_cp437+0x0/0x16 returned 0 after 1 usecs
[ 0.514264] calling init_nls_ascii+0x0/0x16 @ 1
[ 0.514268] initcall init_nls_ascii+0x0/0x16 returned 0 after 0 usecs
[ 0.514273] calling init_autofs_fs+0x0/0x29 @ 1
[ 0.514360] initcall init_autofs_fs+0x0/0x29 returned 0 after 80 usecs
[ 0.514364] calling init_pstore_fs+0x0/0x47 @ 1
[ 0.514366] pstore: using deflate compression
[ 0.514371] initcall init_pstore_fs+0x0/0x47 returned 0 after 5 usecs
[ 0.514374] calling ipc_init+0x0/0x27 @ 1
[ 0.514395] initcall ipc_init+0x0/0x27 returned 0 after 17 usecs
[ 0.514398] calling ipc_sysctl_init+0x0/0x16 @ 1
[ 0.514412] initcall ipc_sysctl_init+0x0/0x16 returned 0 after 11 usecs
[ 0.514415] calling init_mqueue_fs+0x0/0xee @ 1
[ 0.514494] initcall init_mqueue_fs+0x0/0xee returned 0 after 73 usecs
[ 0.514497] calling key_proc_init+0x0/0x5c @ 1
[ 0.514504] initcall key_proc_init+0x0/0x5c returned 0 after 3 usecs
[ 0.514507] calling selinux_nf_ip_init+0x0/0x49 @ 1
[ 0.514510] initcall selinux_nf_ip_init+0x0/0x49 returned 0 after 0 usecs
[ 0.514513] calling init_sel_fs+0x0/0xfa @ 1
[ 0.514516] initcall init_sel_fs+0x0/0xfa returned 0 after 0 usecs
[ 0.514519] calling selnl_init+0x0/0x6e @ 1
[ 0.514542] initcall selnl_init+0x0/0x6e returned 0 after 19 usecs
[ 0.514546] calling sel_netif_init+0x0/0x36 @ 1
[ 0.514549] initcall sel_netif_init+0x0/0x36 returned 0 after 0 usecs
[ 0.514552] calling sel_netnode_init+0x0/0x30 @ 1
[ 0.514555] initcall sel_netnode_init+0x0/0x30 returned 0 after 0 usecs
[ 0.514558] calling sel_netport_init+0x0/0x30 @ 1
[ 0.514561] initcall sel_netport_init+0x0/0x30 returned 0 after 0 usecs
[ 0.514564] calling aurule_init+0x0/0x2a @ 1
[ 0.514567] initcall aurule_init+0x0/0x2a returned 0 after 0 usecs
[ 0.514570] calling crypto_algapi_init+0x0/0x11 @ 1
[ 0.514575] initcall crypto_algapi_init+0x0/0x11 returned 0 after 2 usecs
[ 0.514578] calling seqiv_module_init+0x0/0x14 @ 1
[ 0.514582] initcall seqiv_module_init+0x0/0x14 returned 0 after 0 usecs
[ 0.514588] calling dh_init+0x0/0x20 @ 1
[ 0.514702] alg: self-tests disabled
[ 0.514729] initcall dh_init+0x0/0x20 returned 0 after 123 usecs
[ 0.514739] calling rsa_init+0x0/0x40 @ 1
[ 0.514805] initcall rsa_init+0x0/0x40 returned 0 after 58 usecs
[ 0.514810] calling hmac_module_init+0x0/0x14 @ 1
[ 0.514814] initcall hmac_module_init+0x0/0x14 returned 0 after 0 usecs
[ 0.514817] calling crypto_null_mod_init+0x0/0x46 @ 1
[ 0.515100] initcall crypto_null_mod_init+0x0/0x46 returned 0 after 266 usecs
[ 0.515106] calling md5_mod_init+0x0/0x14 @ 1
[ 0.515203] initcall md5_mod_init+0x0/0x14 returned 0 after 90 usecs
[ 0.515207] calling sha1_generic_mod_init+0x0/0x14 @ 1
[ 0.515276] initcall sha1_generic_mod_init+0x0/0x14 returned 0 after 62 usecs
[ 0.515281] calling sha256_generic_mod_init+0x0/0x19 @ 1
[ 0.515410] initcall sha256_generic_mod_init+0x0/0x19 returned 0 after 121 usecs
[ 0.515415] calling crypto_ecb_module_init+0x0/0x14 @ 1
[ 0.515419] initcall crypto_ecb_module_init+0x0/0x14 returned 0 after 1 usecs
[ 0.515422] calling crypto_cbc_module_init+0x0/0x14 @ 1
[ 0.515426] initcall crypto_cbc_module_init+0x0/0x14 returned 0 after 0 usecs
[ 0.515429] calling crypto_module_init+0x0/0x14 @ 1
[ 0.515432] initcall crypto_module_init+0x0/0x14 returned 0 after 0 usecs
[ 0.515435] calling crypto_module_init+0x0/0x14 @ 1
[ 0.515438] initcall crypto_module_init+0x0/0x14 returned 0 after 0 usecs
[ 0.515442] calling crypto_ctr_module_init+0x0/0x38 @ 1
[ 0.515445] initcall crypto_ctr_module_init+0x0/0x38 returned 0 after 0 usecs
[ 0.515449] calling crypto_gcm_module_init+0x0/0xa7 @ 1
[ 0.515453] initcall crypto_gcm_module_init+0x0/0xa7 returned 0 after 1 usecs
[ 0.515456] calling aes_init+0x0/0x14 @ 1
[ 0.515699] initcall aes_init+0x0/0x14 returned 0 after 220 usecs
[ 0.515708] calling deflate_mod_init+0x0/0x3d @ 1
[ 0.515936] initcall deflate_mod_init+0x0/0x3d returned 0 after 217 usecs
[ 0.515941] calling crc32c_mod_init+0x0/0x14 @ 1
[ 0.516063] initcall crc32c_mod_init+0x0/0x14 returned 0 after 104 usecs
[ 0.516072] calling crct10dif_mod_init+0x0/0x14 @ 1
[ 0.516167] initcall crct10dif_mod_init+0x0/0x14 returned 0 after 87 usecs
[ 0.516171] calling lzo_mod_init+0x0/0x38 @ 1
[ 0.516299] initcall lzo_mod_init+0x0/0x38 returned 0 after 120 usecs
[ 0.516303] calling drbg_init+0x0/0x71 @ 1
[ 0.517870] initcall drbg_init+0x0/0x71 returned 0 after 1512 usecs
[ 0.517881] calling jent_mod_init+0x0/0x31 @ 1
[ 0.518901] initcall jent_mod_init+0x0/0x31 returned 0 after 980 usecs
[ 0.518911] calling ghash_mod_init+0x0/0x14 @ 1
[ 0.519000] initcall ghash_mod_init+0x0/0x14 returned 0 after 81 usecs
[ 0.519004] calling af_alg_init+0x0/0x3a @ 1
[ 0.519008] NET: Registered protocol family 38
[ 0.519011] initcall af_alg_init+0x0/0x3a returned 0 after 3 usecs
[ 0.519014] calling algif_hash_init+0x0/0x14 @ 1
[ 0.519018] initcall algif_hash_init+0x0/0x14 returned 0 after 1 usecs
[ 0.519022] calling algif_skcipher_init+0x0/0x14 @ 1
[ 0.519026] initcall algif_skcipher_init+0x0/0x14 returned 0 after 0 usecs
[ 0.519029] calling rng_init+0x0/0x14 @ 1
[ 0.519032] initcall rng_init+0x0/0x14 returned 0 after 0 usecs
[ 0.519035] calling algif_aead_init+0x0/0x14 @ 1
[ 0.519039] initcall algif_aead_init+0x0/0x14 returned 0 after 0 usecs
[ 0.519042] calling asymmetric_key_init+0x0/0x14 @ 1
[ 0.519045] Key type asymmetric registered
[ 0.519048] initcall asymmetric_key_init+0x0/0x14 returned 0 after 2 usecs
[ 0.519051] calling x509_key_init+0x0/0x14 @ 1
[ 0.519054] Asymmetric key parser 'x509' registered
[ 0.519057] initcall x509_key_init+0x0/0x14 returned 0 after 2 usecs
[ 0.519060] calling proc_genhd_init+0x0/0x3a @ 1
[ 0.519072] initcall proc_genhd_init+0x0/0x3a returned 0 after 8 usecs
[ 0.519075] calling init_emergency_pool+0x0/0x9a @ 1
[ 0.519096] bounce: pool size: 64 pages
[ 0.519110] initcall init_emergency_pool+0x0/0x9a returned 0 after 30 usecs
[ 0.519114] calling bsg_init+0x0/0x12c @ 1
[ 0.519141] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.519144] initcall bsg_init+0x0/0x12c returned 0 after 26 usecs
[ 0.519148] calling throtl_init+0x0/0x3c @ 1
[ 0.519281] initcall throtl_init+0x0/0x3c returned 0 after 124 usecs
[ 0.519285] calling noop_init+0x0/0x14 @ 1
[ 0.519288] io scheduler noop registered
[ 0.519291] initcall noop_init+0x0/0x14 returned 0 after 3 usecs
[ 0.519295] calling deadline_init+0x0/0x14 @ 1
[ 0.519297] io scheduler deadline registered
[ 0.519299] initcall deadline_init+0x0/0x14 returned 0 after 1 usecs
[ 0.519303] calling cfq_init+0x0/0x6e @ 1
[ 0.519444] io scheduler cfq registered (default)
[ 0.519448] initcall cfq_init+0x0/0x6e returned 0 after 138 usecs
[ 0.519453] calling deadline_init+0x0/0x14 @ 1
[ 0.519455] io scheduler mq-deadline registered
[ 0.519458] initcall deadline_init+0x0/0x14 returned 0 after 2 usecs
[ 0.519461] calling kyber_init+0x0/0x14 @ 1
[ 0.519463] io scheduler kyber registered
[ 0.519466] initcall kyber_init+0x0/0x14 returned 0 after 1 usecs
[ 0.519470] calling crc_t10dif_mod_init+0x0/0x35 @ 1
[ 0.519478] initcall crc_t10dif_mod_init+0x0/0x35 returned 0 after 4 usecs
[ 0.519482] calling libcrc32c_mod_init+0x0/0x25 @ 1
[ 0.519486] initcall libcrc32c_mod_init+0x0/0x25 returned 0 after 1 usecs
[ 0.519490] calling percpu_counter_startup+0x0/0x50 @ 1
[ 0.519527] initcall percpu_counter_startup+0x0/0x50 returned 0 after 31 usecs
[ 0.519531] calling audit_classes_init+0x0/0x4f @ 1
[ 0.519539] initcall audit_classes_init+0x0/0x4f returned 0 after 5 usecs
[ 0.519543] calling sg_pool_init+0x0/0xab @ 1
[ 0.519580] initcall sg_pool_init+0x0/0xab returned 0 after 31 usecs
[ 0.519583] calling phy_core_init+0x0/0x44 @ 1
[ 0.519597] initcall phy_core_init+0x0/0x44 returned 0 after 10 usecs
[ 0.519601] calling pci_proc_init+0x0/0x63 @ 1
[ 0.519666] initcall pci_proc_init+0x0/0x63 returned 0 after 59 usecs
[ 0.519670] calling pcie_portdrv_init+0x0/0x34 @ 1
[ 0.520470] probe of 0000:00:15.0 returned 1 after 783 usecs
[ 0.520963] probe of 0000:00:15.1 returned 1 after 480 usecs
[ 0.520990] initcall pcie_portdrv_init+0x0/0x34 returned 0 after 1284 usecs
[ 0.520995] calling aer_service_init+0x0/0x33 @ 1
[ 0.521009] initcall aer_service_init+0x0/0x33 returned 0 after 9 usecs
[ 0.521013] calling pcie_pme_service_init+0x0/0x14 @ 1
[ 0.521190] pcieport 0000:00:15.0: Signaling PME with IRQ 24
[ 0.521271] probe of 0000:00:15.0:pcie001 returned 1 after 252 usecs
[ 0.521324] pcieport 0000:00:15.1: Signaling PME with IRQ 25
[ 0.521335] probe of 0000:00:15.1:pcie001 returned 1 after 48 usecs
[ 0.521347] initcall pcie_pme_service_init+0x0/0x14 returned 0 after 321 usecs
[ 0.521352] calling dpc_service_init+0x0/0x14 @ 1
[ 0.521364] initcall dpc_service_init+0x0/0x14 returned 0 after 8 usecs
[ 0.521368] calling pci_stub_init+0x0/0x133 @ 1
[ 0.521390] initcall pci_stub_init+0x0/0x133 returned 0 after 18 usecs
[ 0.521396] calling acpi_button_driver_init+0x0/0x20 @ 1
[ 0.521513] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.521543] ACPI: Power Button [PWRB]
[ 0.521560] probe of PNP0C0C:00 returned 1 after 123 usecs
[ 0.521635] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.521650] ACPI: Power Button [PWRF]
[ 0.521742] probe of LNXPWRBN:00 returned 1 after 174 usecs
[ 0.521755] initcall acpi_button_driver_init+0x0/0x20 returned 0 after 345 usecs
[ 0.521760] calling acpi_fan_driver_init+0x0/0x16 @ 1
[ 0.521781] initcall acpi_fan_driver_init+0x0/0x16 returned 0 after 15 usecs
[ 0.521784] calling acpi_processor_driver_init+0x0/0x8d @ 1
[ 0.522040] probe of cpu0 returned 1 after 248 usecs
[ 0.522305] probe of cpu1 returned 1 after 260 usecs
[ 0.522320] initcall acpi_processor_driver_init+0x0/0x8d returned 0 after 519 usecs
[ 0.522324] calling acpi_thermal_init+0x0/0x78 @ 1
[ 0.523239] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.523242] ACPI: Thermal Zone [TZ00] (53 C)
[ 0.523254] probe of LNXTHERM:00 returned 1 after 821 usecs
[ 0.523281] initcall acpi_thermal_init+0x0/0x78 returned 0 after 930 usecs
[ 0.523284] calling acpi_hed_driver_init+0x0/0x14 @ 1
[ 0.523309] initcall acpi_hed_driver_init+0x0/0x14 returned 0 after 21 usecs
[ 0.523313] calling gpio_clk_driver_init+0x0/0x16 @ 1
[ 0.523328] initcall gpio_clk_driver_init+0x0/0x16 returned 0 after 11 usecs
[ 0.523331] calling plt_clk_driver_init+0x0/0x16 @ 1
[ 0.523344] initcall plt_clk_driver_init+0x0/0x16 returned 0 after 9 usecs
[ 0.523347] calling dw_pci_driver_init+0x0/0x1b @ 1
[ 0.523380] initcall dw_pci_driver_init+0x0/0x1b returned 0 after 28 usecs
[ 0.523383] calling n_null_init+0x0/0x21 @ 1
[ 0.523387] initcall n_null_init+0x0/0x21 returned 0 after 0 usecs
[ 0.523390] calling pty_init+0x0/0x1d6 @ 1
[ 0.523493] initcall pty_init+0x0/0x1d6 returned 0 after 96 usecs
[ 0.523496] calling sysrq_init+0x0/0x68 @ 1
[ 0.523503] initcall sysrq_init+0x0/0x68 returned 0 after 4 usecs
[ 0.523506] initcall serial8250_init blacklisted
[ 0.523510] calling serial_pci_driver_init+0x0/0x1b @ 1
[ 0.523589] initcall serial_pci_driver_init+0x0/0x1b returned 0 after 73 usecs
[ 0.523593] calling dw8250_platform_driver_init+0x0/0x16 @ 1
[ 0.523609] initcall dw8250_platform_driver_init+0x0/0x16 returned 0 after 12 usecs
[ 0.523613] calling lpss8250_pci_driver_init+0x0/0x1b @ 1
[ 0.523633] initcall lpss8250_pci_driver_init+0x0/0x1b returned 0 after 16 usecs
[ 0.523637] calling mid8250_pci_driver_init+0x0/0x1b @ 1
[ 0.523656] initcall mid8250_pci_driver_init+0x0/0x1b returned 0 after 15 usecs
[ 0.523660] calling raw_init+0x0/0x12d @ 1
[ 0.523866] initcall raw_init+0x0/0x12d returned 0 after 197 usecs
[ 0.523870] calling hpet_init+0x0/0x5c @ 1
[ 0.524192] initcall hpet_init+0x0/0x5c returned 0 after 302 usecs
[ 0.524201] calling nvram_init+0x0/0x75 @ 1
[ 0.524271] Non-volatile memory driver v1.3
[ 0.524275] initcall nvram_init+0x0/0x75 returned 0 after 68 usecs
[ 0.524279] calling hwrng_modinit+0x0/0x71 @ 1
[ 0.524418] initcall hwrng_modinit+0x0/0x71 returned 0 after 131 usecs
[ 0.524422] calling mod_init+0x0/0x94 @ 1
[ 0.524440] initcall mod_init+0x0/0x94 returned -19 after 15 usecs
[ 0.524443] calling agp_init+0x0/0x29 @ 1
[ 0.524445] Linux agpgart interface v0.103
[ 0.524448] initcall agp_init+0x0/0x29 returned 0 after 1 usecs
[ 0.524451] calling agp_amd64_mod_init+0x0/0xf @ 1
[ 0.524542] probe of 0000:00:00.0 returned 0 after 28 usecs
[ 0.524561] probe of 0000:00:01.0 returned 0 after 14 usecs
[ 0.524645] probe of 0000:00:01.1 returned 0 after 79 usecs
[ 0.524732] probe of 0000:00:11.0 returned 0 after 83 usecs
[ 0.524746] probe of 0000:00:12.0 returned 0 after 10 usecs
[ 0.524764] probe of 0000:00:12.2 returned 0 after 14 usecs
[ 0.524776] probe of 0000:00:13.0 returned 0 after 9 usecs
[ 0.524794] probe of 0000:00:13.2 returned 0 after 14 usecs
[ 0.524807] probe of 0000:00:14.0 returned 0 after 9 usecs
[ 0.524823] probe of 0000:00:14.2 returned 0 after 13 usecs
[ 0.524837] probe of 0000:00:14.3 returned 0 after 10 usecs
[ 0.524850] probe of 0000:00:14.4 returned 0 after 10 usecs
[ 0.524862] probe of 0000:00:14.5 returned 0 after 9 usecs
[ 0.524876] probe of 0000:00:18.0 returned 0 after 9 usecs
[ 0.524888] probe of 0000:00:18.1 returned 0 after 9 usecs
[ 0.524900] probe of 0000:00:18.2 returned 0 after 8 usecs
[ 0.524913] probe of 0000:00:18.3 returned 0 after 10 usecs
[ 0.524925] probe of 0000:00:18.4 returned 0 after 8 usecs
[ 0.524937] probe of 0000:00:18.5 returned 0 after 8 usecs
[ 0.524949] probe of 0000:00:18.6 returned 0 after 9 usecs
[ 0.524961] probe of 0000:00:18.7 returned 0 after 8 usecs
[ 0.525049] probe of 0000:03:00.0 returned 0 after 85 usecs
[ 0.525069] initcall agp_amd64_mod_init+0x0/0xf returned -19 after 599 usecs
[ 0.525073] calling agp_intel_init+0x0/0x2a @ 1
[ 0.525102] initcall agp_intel_init+0x0/0x2a returned 0 after 24 usecs
[ 0.525105] calling agp_sis_init+0x0/0x2a @ 1
[ 0.525155] initcall agp_sis_init+0x0/0x2a returned 0 after 44 usecs
[ 0.525158] calling agp_via_init+0x0/0x2a @ 1
[ 0.525182] initcall agp_via_init+0x0/0x2a returned 0 after 20 usecs
[ 0.525186] calling drm_kms_helper_init+0x0/0x18 @ 1
[ 0.525205] initcall drm_kms_helper_init+0x0/0x18 returned 0 after 15 usecs
[ 0.525208] calling drm_core_init+0x0/0xd1 @ 1
[ 0.525237] initcall drm_core_init+0x0/0xd1 returned 0 after 24 usecs
[ 0.525241] calling ttm_init+0x0/0x5f @ 1
[ 0.525267] initcall ttm_init+0x0/0x5f returned 0 after 22 usecs
[ 0.525270] calling radeon_init+0x0/0x9b @ 1
[ 0.525272] [drm] radeon kernel modesetting enabled.
[ 0.526026] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x1002:0x9802 0x00).
[ 0.526101] ATOM BIOS: AMD
[ 0.526264] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
[ 0.526268] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF
[ 0.526275] [drm] Detected VRAM RAM=384M, BAR=256M
[ 0.526277] [drm] RAM width 32bits DDR
[ 0.526471] [TTM] Zone kernel: Available graphics memory: 418440 kiB
[ 0.526475] [TTM] Zone highmem: Available graphics memory: 1855748 kiB
[ 0.526476] [TTM] Initializing pool allocator
[ 0.526485] [TTM] Initializing DMA pool allocator
[ 0.526525] [drm] radeon: 384M of VRAM memory ready
[ 0.526528] [drm] radeon: 1024M of GTT memory ready.
[ 0.526547] [drm] Loading PALM Microcode
[ 0.526555] [drm] Internal thermal controller without fan control
[ 0.526625] [drm] Found smc ucode version: 0x00010601
[ 0.526697] [drm] radeon: dpm initialized
[ 0.526730] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 0.539457] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
[ 0.539645] radeon 0000:00:01.0: WB enabled
[ 0.539651] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0x(ptrval)
[ 0.539655] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0x(ptrval)
[ 0.540533] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x(ptrval)
[ 0.540537] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.540538] [drm] Driver supports precise vblank timestamp query.
[ 0.540541] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
[ 0.540624] radeon 0000:00:01.0: radeon: using MSI.
[ 0.540661] [drm] radeon: irq initialized.
[ 0.557319] [drm] ring test on 0 succeeded in 1 usecs
[ 0.557328] [drm] ring test on 3 succeeded in 3 usecs
[ 0.603395] [drm] ring test on 5 succeeded in 1 usecs
[ 0.623419] [drm] UVD initialized successfully.
[ 0.623795] [drm] ib test on ring 0 succeeded in 0 usecs
[ 0.623852] [drm] ib test on ring 3 succeeded in 0 usecs
[ 1.150143] [drm] ib test on ring 5 succeeded
[ 1.170853] [drm] Radeon Display Connectors
[ 1.170855] [drm] Connector 0:
[ 1.170856] [drm] HDMI-A-1
[ 1.170857] [drm] HPD1
[ 1.170860] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 1.170861] [drm] Encoders:
[ 1.170863] [drm] DFP1: INTERNAL_UNIPHY
[ 1.170864] [drm] Connector 1:
[ 1.170865] [drm] HDMI-A-2
[ 1.170866] [drm] HPD2
[ 1.170869] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 1.170870] [drm] Encoders:
[ 1.170871] [drm] DFP2: INTERNAL_UNIPHY
[ 1.170872] [drm] Connector 2:
[ 1.170873] [drm] VGA-1
[ 1.170875] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[ 1.170876] [drm] Encoders:
[ 1.170878] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 1.212161] [drm] fb mappable at 0xE0366000
[ 1.212163] [drm] vram apper at 0xE0000000
[ 1.212164] [drm] size 5242880
[ 1.212165] [drm] fb depth is 24
[ 1.212166] [drm] pitch is 5120
[ 1.212451] fbcon: radeondrmfb (fb0) is primary device
[ 1.255365] Console: switching to colour frame buffer device 160x64
[ 1.266135] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 1.266242] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0
[ 1.266263] probe of 0000:00:01.0 returned 1 after 740970 usecs
[ 1.266401] initcall radeon_init+0x0/0x9b returned 0 after 723750 usecs
[ 1.266407] calling cn_proc_init+0x0/0x35 @ 1
[ 1.266413] initcall cn_proc_init+0x0/0x35 returned 0 after 2 usecs
[ 1.266419] calling topology_sysfs_init+0x0/0x40 @ 1
[ 1.266441] initcall topology_sysfs_init+0x0/0x40 returned 0 after 18 usecs
[ 1.266447] calling cacheinfo_sysfs_init+0x0/0x2a @ 1
[ 1.266924] initcall cacheinfo_sysfs_init+0x0/0x2a returned 173 after 460 usecs
[ 1.266928] calling init_sd+0x0/0x136 @ 1
[ 1.266975] initcall init_sd+0x0/0x136 returned 0 after 42 usecs
[ 1.266979] calling init_sr+0x0/0x42 @ 1
[ 1.266991] initcall init_sr+0x0/0x42 returned 0 after 8 usecs
[ 1.266995] calling init_sg+0x0/0x18d @ 1
[ 1.267041] initcall init_sg+0x0/0x18d returned 0 after 41 usecs
[ 1.267046] calling ahci_pci_driver_init+0x0/0x1b @ 1
[ 1.267088] ahci 0000:00:11.0: version 3.0
[ 1.267822] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 1.267828] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part
[ 1.270309] scsi host0: ahci
[ 1.270955] scsi host1: ahci
[ 1.271335] scsi host2: ahci
[ 1.271777] scsi host3: ahci
[ 1.272225] scsi host4: ahci
[ 1.272523] scsi host5: ahci
[ 1.272721] ata1: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b100 irq 19
[ 1.272725] ata2: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b180 irq 19
[ 1.272728] ata3: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b200 irq 19
[ 1.272731] ata4: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b280 irq 19
[ 1.272735] ata5: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b300 irq 19
[ 1.272738] ata6: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b380 irq 19
[ 1.272770] probe of 0000:00:11.0 returned 1 after 5700 usecs
[ 1.272983] initcall ahci_pci_driver_init+0x0/0x1b returned 0 after 5786 usecs
[ 1.272991] calling net_olddevs_init+0x0/0x53 @ 1
[ 1.273001] initcall net_olddevs_init+0x0/0x53 returned 0 after 7 usecs
[ 1.273006] calling fixed_mdio_bus_init+0x0/0xd8 @ 1
[ 1.273093] libphy: Fixed MDIO Bus: probed
[ 1.273098] initcall fixed_mdio_bus_init+0x0/0xd8 returned 0 after 85 usecs
[ 1.273102] calling cdrom_init+0x0/0x1d @ 1
[ 1.273117] initcall cdrom_init+0x0/0x1d returned 0 after 11 usecs
[ 1.273122] calling usb_serial_init+0x0/0x143 @ 1
[ 1.273290] usbcore: registered new interface driver usbserial_generic
[ 1.273304] usbserial: USB Serial support registered for generic
[ 1.273310] initcall usb_serial_init+0x0/0x143 returned 0 after 179 usecs
[ 1.273314] calling i8042_init+0x0/0x41a @ 1
[ 1.273350] probe of 00:01 returned 1 after 21 usecs
[ 1.273366] probe of 00:03 returned 1 after 10 usecs
[ 1.273391] probe of 00:02 returned 1 after 10 usecs
[ 1.273405] probe of 00:04 returned 1 after 9 usecs
[ 1.273414] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.277584] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.277612] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.277787] probe of i8042 returned 1 after 4093 usecs
[ 1.277810] initcall i8042_init+0x0/0x41a returned 0 after 4380 usecs
[ 1.277817] calling serport_init+0x0/0x30 @ 1
[ 1.277821] initcall serport_init+0x0/0x30 returned 0 after 1 usecs
[ 1.277826] calling input_leds_init+0x0/0x14 @ 1
[ 1.277832] initcall input_leds_init+0x0/0x14 returned 0 after 2 usecs
[ 1.277837] calling mousedev_init+0x0/0x56 @ 1
[ 1.278105] mousedev: PS/2 mouse device common for all mice
[ 1.278109] initcall mousedev_init+0x0/0x56 returned 0 after 262 usecs
[ 1.278114] calling evdev_init+0x0/0x14 @ 1
[ 1.278390] initcall evdev_init+0x0/0x14 returned 0 after 265 usecs
[ 1.278395] calling atkbd_init+0x0/0x25 @ 1
[ 1.278433] initcall atkbd_init+0x0/0x25 returned 0 after 33 usecs
[ 1.278437] calling psmouse_init+0x0/0x7e @ 1
[ 1.278589] initcall psmouse_init+0x0/0x7e returned 0 after 143 usecs
[ 1.278594] calling cmos_init+0x0/0x65 @ 1
[ 1.278703] rtc_cmos 00:00: RTC can wake from S4
[ 1.279094] rtc_cmos 00:00: registered as rtc0
[ 1.279134] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
[ 1.279141] probe of 00:00 returned 1 after 521 usecs
[ 1.279156] initcall cmos_init+0x0/0x65 returned 0 after 545 usecs
[ 1.279161] calling sensors_w83627ehf_init+0x0/0x16f @ 1
[ 1.279264] w83627ehf: Found NCT6775F chip at 0x290
[ 1.279841] w83627ehf w83627ehf.656: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 1.279900] probe of w83627ehf.656 returned 1 after 575 usecs
[ 1.279906] initcall sensors_w83627ehf_init+0x0/0x16f returned 0 after 722 usecs
[ 1.279911] calling dm_init+0x0/0x3c @ 1
[ 1.280003] device-mapper: uevent: version 1.0.3
[ 1.280313] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[ 1.280328] initcall dm_init+0x0/0x3c returned 0 after 397 usecs
[ 1.280337] calling dm_crypt_init+0x0/0x2d @ 1
[ 1.280342] initcall dm_crypt_init+0x0/0x2d returned 0 after 1 usecs
[ 1.280348] calling cpufreq_gov_powersave_init+0x0/0x14 @ 1
[ 1.280353] initcall cpufreq_gov_powersave_init+0x0/0x14 returned 0 after 1 usecs
[ 1.280359] calling cpufreq_gov_userspace_init+0x0/0x14 @ 1
[ 1.280363] initcall cpufreq_gov_userspace_init+0x0/0x14 returned 0 after 0 usecs
[ 1.280368] calling cpufreq_gov_dbs_init+0x0/0x14 @ 1
[ 1.280372] initcall cpufreq_gov_dbs_init+0x0/0x14 returned 0 after 0 usecs
[ 1.280376] calling intel_pstate_init+0x0/0x340 @ 1
[ 1.280382] initcall intel_pstate_init+0x0/0x340 returned -19 after 1 usecs
[ 1.280386] calling ledtrig_disk_init+0x0/0x48 @ 1
[ 1.280394] initcall ledtrig_disk_init+0x0/0x48 returned 0 after 4 usecs
[ 1.280399] calling ledtrig_panic_init+0x0/0x34 @ 1
[ 1.280405] initcall ledtrig_panic_init+0x0/0x34 returned 0 after 1 usecs
[ 1.280408] calling dmi_sysfs_init+0x0/0xc1 @ 1
[ 1.280528] initcall dmi_sysfs_init+0x0/0xc1 returned 0 after 113 usecs
[ 1.280531] calling hid_init+0x0/0x5d @ 1
[ 1.280562] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.280585] initcall hid_init+0x0/0x5d returned 0 after 49 usecs
[ 1.280588] calling hid_generic_init+0x0/0x1b @ 1
[ 1.280617] initcall hid_generic_init+0x0/0x1b returned 0 after 24 usecs
[ 1.280620] calling ite_driver_init+0x0/0x1b @ 1
[ 1.280634] initcall ite_driver_init+0x0/0x1b returned 0 after 11 usecs
[ 1.280638] calling magicmouse_driver_init+0x0/0x1b @ 1
[ 1.280659] initcall magicmouse_driver_init+0x0/0x1b returned 0 after 18 usecs
[ 1.280662] calling ntrig_driver_init+0x0/0x1b @ 1
[ 1.280682] initcall ntrig_driver_init+0x0/0x1b returned 0 after 15 usecs
[ 1.280685] calling hid_init+0x0/0x58 @ 1
[ 1.280709] usbcore: registered new interface driver usbhid
[ 1.280711] usbhid: USB HID core driver
[ 1.280714] initcall hid_init+0x0/0x58 returned 0 after 26 usecs
[ 1.280717] calling pmc_atom_init+0x0/0x226 @ 1
[ 1.280737] initcall pmc_atom_init+0x0/0x226 returned -19 after 16 usecs
[ 1.280740] calling extcon_class_init+0x0/0x1b @ 1
[ 1.280750] initcall extcon_class_init+0x0/0x1b returned 0 after 6 usecs
[ 1.280753] calling powercap_init+0x0/0x1fa @ 1
[ 1.280833] initcall powercap_init+0x0/0x1fa returned 0 after 75 usecs
[ 1.280840] calling pm_check_save_msr+0x0/0x20 @ 1
[ 1.280845] initcall pm_check_save_msr+0x0/0x20 returned 0 after 1 usecs
[ 1.280849] calling sock_diag_init+0x0/0x34 @ 1
[ 1.280938] initcall sock_diag_init+0x0/0x34 returned 0 after 81 usecs
[ 1.280943] calling blackhole_init+0x0/0x14 @ 1
[ 1.280947] initcall blackhole_init+0x0/0x14 returned 0 after 1 usecs
[ 1.280951] calling fq_codel_module_init+0x0/0x14 @ 1
[ 1.280955] initcall fq_codel_module_init+0x0/0x14 returned 0 after 0 usecs
[ 1.280959] calling init_cgroup_cls+0x0/0x14 @ 1
[ 1.280963] initcall init_cgroup_cls+0x0/0x14 returned 0 after 0 usecs
[ 1.280967] calling xt_init+0x0/0xb2 @ 1
[ 1.280972] initcall xt_init+0x0/0xb2 returned 0 after 2 usecs
[ 1.280976] calling tcpudp_mt_init+0x0/0x19 @ 1
[ 1.280980] initcall tcpudp_mt_init+0x0/0x19 returned 0 after 1 usecs
[ 1.280985] calling gre_offload_init+0x0/0x47 @ 1
[ 1.280989] initcall gre_offload_init+0x0/0x47 returned 0 after 1 usecs
[ 1.280994] calling sysctl_ipv4_init+0x0/0x45 @ 1
[ 1.281090] initcall sysctl_ipv4_init+0x0/0x45 returned 0 after 90 usecs
[ 1.281094] calling ip_tables_init+0x0/0x84 @ 1
[ 1.281111] initcall ip_tables_init+0x0/0x84 returned 0 after 12 usecs
[ 1.281115] calling iptable_filter_init+0x0/0x45 @ 1
[ 1.281324] initcall iptable_filter_init+0x0/0x45 returned 0 after 199 usecs
[ 1.281329] calling reject_tg_init+0x0/0x14 @ 1
[ 1.281332] initcall reject_tg_init+0x0/0x14 returned 0 after 0 usecs
[ 1.281337] calling cubictcp_register+0x0/0x71 @ 1
[ 1.281342] initcall cubictcp_register+0x0/0x71 returned 0 after 1 usecs
[ 1.281346] calling xfrm_user_init+0x0/0x45 @ 1
[ 1.281347] Initializing XFRM netlink socket
[ 1.281356] initcall xfrm_user_init+0x0/0x45 returned 0 after 6 usecs
[ 1.281360] calling inet6_init+0x0/0x32d @ 1
[ 1.281641] NET: Registered protocol family 10
[ 1.282192] Segment Routing with IPv6
[ 1.282231] initcall inet6_init+0x0/0x32d returned 0 after 844 usecs
[ 1.282236] calling mip6_init+0x0/0xac @ 1
[ 1.282237] mip6: Mobile IPv6
[ 1.282242] initcall mip6_init+0x0/0xac returned 0 after 2 usecs
[ 1.282247] calling packet_init+0x0/0x3e @ 1
[ 1.282250] NET: Registered protocol family 17
[ 1.282257] initcall packet_init+0x0/0x3e returned 0 after 6 usecs
[ 1.282264] calling mcheck_init_device+0x0/0x105 @ 1
[ 1.282665] initcall mcheck_init_device+0x0/0x105 returned 0 after 376 usecs
[ 1.282960] calling mcheck_late_init+0x0/0x69 @ 1
[ 1.282987] initcall mcheck_late_init+0x0/0x69 returned 0 after 22 usecs
[ 1.282993] calling severities_debugfs_init+0x0/0x3a @ 1
[ 1.282999] initcall severities_debugfs_init+0x0/0x3a returned 0 after 2 usecs
[ 1.283005] calling threshold_init_device+0x0/0x47 @ 1
[ 1.283009] initcall threshold_init_device+0x0/0x47 returned 0 after 0 usecs
[ 1.283013] calling hpet_insert_resource+0x0/0x24 @ 1
[ 1.283020] initcall hpet_insert_resource+0x0/0x24 returned 0 after 4 usecs
[ 1.283024] calling lapic_insert_resource+0x0/0x4b @ 1
[ 1.283028] initcall lapic_insert_resource+0x0/0x4b returned 0 after 0 usecs
[ 1.283032] calling print_ICs+0x0/0x17b @ 1
[ 1.283035] initcall print_ICs+0x0/0x17b returned 0 after 0 usecs
[ 1.283040] calling print_ipi_mode+0x0/0x2b @ 1
[ 1.283041] Using IPI No-Shortcut mode
[ 1.283044] initcall print_ipi_mode+0x0/0x2b returned 0 after 1 usecs
[ 1.283049] calling pat_memtype_list_init+0x0/0x36 @ 1
[ 1.283056] initcall pat_memtype_list_init+0x0/0x36 returned 0 after 3 usecs
[ 1.283062] calling create_tlb_single_page_flush_ceiling+0x0/0x28 @ 1
[ 1.283069] initcall create_tlb_single_page_flush_ceiling+0x0/0x28 returned 0 after 3 usecs
[ 1.283076] calling init_oops_id+0x0/0x50 @ 1
[ 1.283084] initcall init_oops_id+0x0/0x50 returned 0 after 4 usecs
[ 1.283088] calling sched_clock_init_late+0x0/0x89 @ 1
[ 1.283092] sched_clock: Marking stable (1279714501, 3153654)->(1387476416, -104608261)
[ 1.283201] initcall sched_clock_init_late+0x0/0x89 returned 0 after 106 usecs
[ 1.283204] calling sched_init_debug+0x0/0x3a @ 1
[ 1.283213] initcall sched_init_debug+0x0/0x3a returned 0 after 5 usecs
[ 1.283217] calling pm_qos_power_init+0x0/0x9a @ 1
[ 1.283539] initcall pm_qos_power_init+0x0/0x9a returned 0 after 310 usecs
[ 1.283543] calling pm_debugfs_init+0x0/0x24 @ 1
[ 1.283553] initcall pm_debugfs_init+0x0/0x24 returned 0 after 7 usecs
[ 1.283557] calling printk_late_init+0x0/0x106 @ 1
[ 1.283563] initcall printk_late_init+0x0/0x106 returned 0 after 3 usecs
[ 1.283569] calling tk_debug_sleep_time_init+0x0/0x3c @ 1
[ 1.283575] initcall tk_debug_sleep_time_init+0x0/0x3c returned 0 after 2 usecs
[ 1.283580] calling debugfs_kprobe_init+0x0/0xb7 @ 1
[ 1.283592] initcall debugfs_kprobe_init+0x0/0xb7 returned 0 after 7 usecs
[ 1.283596] calling taskstats_init+0x0/0x38 @ 1
[ 1.283616] registered taskstats version 1
[ 1.283620] initcall taskstats_init+0x0/0x38 returned 0 after 19 usecs
[ 1.283625] calling load_system_certificate_list+0x0/0xc4 @ 1
[ 1.283627] Loading compiled-in X.509 certificates
[ 1.283630] initcall load_system_certificate_list+0x0/0xc4 returned 0 after 1 usecs
[ 1.283635] calling fault_around_debugfs+0x0/0x35 @ 1
[ 1.283642] initcall fault_around_debugfs+0x0/0x35 returned 0 after 3 usecs
[ 1.283647] calling max_swapfiles_check+0x0/0xc @ 1
[ 1.283651] initcall max_swapfiles_check+0x0/0xc returned 0 after 0 usecs
[ 1.283656] calling init_zswap+0x0/0x3a7 @ 1
[ 1.283705] zswap: loaded using pool lzo/zbud
[ 1.283852] initcall init_zswap+0x0/0x3a7 returned 0 after 186 usecs
[ 1.283856] calling split_huge_pages_debugfs+0x0/0x35 @ 1
[ 1.283874] initcall split_huge_pages_debugfs+0x0/0x35 returned 0 after 3 usecs
[ 1.283877] calling kmemleak_late_init+0x0/0x8d @ 1
[ 1.283888] initcall kmemleak_late_init+0x0/0x8d returned -12 after 7 usecs
[ 1.283891] calling check_early_ioremap_leak+0x0/0x38 @ 1
[ 1.283895] initcall check_early_ioremap_leak+0x0/0x38 returned 0 after 0 usecs
[ 1.283898] calling set_hardened_usercopy+0x0/0x28 @ 1
[ 1.283901] initcall set_hardened_usercopy+0x0/0x28 returned 1 after 0 usecs
[ 1.283905] calling init_root_keyring+0x0/0xf @ 1
[ 1.283939] initcall init_root_keyring+0x0/0xf returned 0 after 30 usecs
[ 1.283942] calling big_key_init+0x0/0xa8 @ 1
[ 1.285090] Key type big_key registered
[ 1.285104] initcall big_key_init+0x0/0xa8 returned 0 after 1124 usecs
[ 1.285112] calling prandom_reseed+0x0/0x27 @ 1
[ 1.285125] initcall prandom_reseed+0x0/0x27 returned 0 after 9 usecs
[ 1.285129] calling init_error_injection+0x0/0x61 @ 1
[ 1.285285] initcall init_error_injection+0x0/0x61 returned 0 after 148 usecs
[ 1.285290] calling pci_resource_alignment_sysfs_init+0x0/0x23 @ 1
[ 1.285305] initcall pci_resource_alignment_sysfs_init+0x0/0x23 returned 0 after 11 usecs
[ 1.285309] calling pci_sysfs_init+0x0/0x47 @ 1
[ 1.285578] initcall pci_sysfs_init+0x0/0x47 returned 0 after 257 usecs
[ 1.285582] calling clk_debug_init+0x0/0xe7 @ 1
[ 1.285597] initcall clk_debug_init+0x0/0xe7 returned 0 after 11 usecs
[ 1.285603] calling deferred_probe_initcall+0x0/0x90 @ 1
[ 1.285657] initcall deferred_probe_initcall+0x0/0x90 returned 0 after 48 usecs
[ 1.285663] calling late_resume_init+0x0/0xf9 @ 1
[ 1.285666] Magic number: 2:692:772
[ 1.285792] initcall late_resume_init+0x0/0xf9 returned 0 after 122 usecs
[ 1.285797] calling sync_debugfs_init+0x0/0x51 @ 1
[ 1.285819] initcall sync_debugfs_init+0x0/0x51 returned 0 after 18 usecs
[ 1.285824] calling rtc_hctosys+0x0/0xee @ 1
[ 1.285940] rtc_cmos 00:00: setting system clock to 2018-09-24 06:46:42 UTC (1537771602)
[ 1.285944] initcall rtc_hctosys+0x0/0xee returned 0 after 113 usecs
[ 1.285948] calling firmware_memmap_init+0x0/0x2d @ 1
[ 1.286029] initcall firmware_memmap_init+0x0/0x2d returned 0 after 75 usecs
[ 1.286033] calling pci_mmcfg_late_insert_resources+0x0/0x49 @ 1
[ 1.286037] initcall pci_mmcfg_late_insert_resources+0x0/0x49 returned 0 after 0 usecs
[ 1.286042] calling tcp_congestion_default+0x0/0x19 @ 1
[ 1.286047] initcall tcp_congestion_default+0x0/0x19 returned 0 after 1 usecs
[ 1.286054] calling clear_boot_tracer+0x0/0x2a @ 1
[ 1.286058] initcall clear_boot_tracer+0x0/0x2a returned 0 after 0 usecs
[ 1.286063] calling tracing_set_default_clock+0x0/0x36 @ 1
[ 1.286068] initcall tracing_set_default_clock+0x0/0x36 returned 0 after 0 usecs
[ 1.286074] calling acpi_gpio_handle_deferred_request_interrupts+0x0/0xb0 @ 1
[ 1.286078] initcall acpi_gpio_handle_deferred_request_interrupts+0x0/0xb0 returned 0 after 0 usecs
[ 1.286083] calling clk_disable_unused+0x0/0x100 @ 1
[ 1.286088] initcall clk_disable_unused+0x0/0x100 returned 0 after 1 usecs
[ 1.306604] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.306917] probe of serio0 returned 1 after 28465 usecs
[ 1.350940] probe of serio1 returned 0 after 44004 usecs
[ 1.362622] probe of serio1 returned 0 after 11656 usecs
[ 1.510150] tsc: Refined TSC clocksource calibration: 1600.009 MHz
[ 1.510167] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x17102d6b73f, max_idle_ns: 440795211487 ns
[ 1.510321] clocksource: Switched to clocksource tsc
[ 1.581411] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.581480] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.581522] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.581562] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.581613] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.742166] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.743361] ata1.00: ATA-9: SanDisk SDSSDP064G, 2.0.0, max UDMA/133
[ 1.743368] ata1.00: 125045424 sectors, multi 1: LBA48 NCQ (depth 32)
[ 1.744345] ata1.00: configured for UDMA/133
[ 1.745130] scsi 0:0:0:0: Direct-Access ATA SanDisk SDSSDP06 0 PQ: 0 ANSI: 5
[ 1.745658] probe of 0:0:0:0 returned 1 after 98 usecs
[ 1.745836] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.745912] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[ 1.745942] sd 0:0:0:0: [sda] Write Protect is off
[ 1.745946] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.745994] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.748480] sda: sda1
[ 1.749231] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.759820] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.759855] VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
[ 1.760972] random: fast init done
[ 1.762100] devtmpfs: mounted
[ 1.763628] Freeing init [mem 0xdec1d000-0xded32fff]
[ 1.764686] Freeing unused kernel image memory: 1112K
[ 1.769814] RO text: 0xde000000 - 0xde880fff
[ 1.770060] Write protecting the kernel text: 8708k
[ 1.770062] RO data: 0xde881000 - 0xdeb4cfff
[ 1.770383] Write protecting the kernel read-only data: 2864k
[ 1.770384] NX data: 0xde881000 - 0xdedfffff
[ 1.770386] NX-protecting the kernel data: 5628k
[ 1.771126] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.771135] Run /lib/systemd/systemd-bootchart as init process
[ 1.888575] random: systemd-bootcha: uninitialized urandom read (16 bytes read)
[ 2.070504] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 2.082386] systemd[1]: Detected architecture x86.
[ 2.086731] systemd[1]: Set hostname to <kodi>.
[ 2.461517] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.461835] systemd[1]: Listening on udev Kernel Socket.
[ 2.462048] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.462071] systemd[1]: Reached target Remote File Systems.
[ 2.471860] systemd[1]: Listening on Process Core Dump Socket.
[ 2.472094] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 2.473255] systemd[1]: Created slice User and Session Slice.
[ 2.473654] systemd[1]: Listening on Journal Audit Socket.
[ 2.473713] systemd[1]: Reached target Swap.
[ 2.534409] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 3.261965] calling acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] @ 152
[ 3.262137] acpi_cpufreq: overriding BIOS provided _PSD data
[ 3.262298] initcall acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] returned 0 after 315 usecs
[ 3.264665] calling pcc_cpufreq_init+0x0/0xebc [pcc_cpufreq] @ 152
[ 3.264674] initcall pcc_cpufreq_init+0x0/0xebc [pcc_cpufreq] returned 0 after 1 usecs
[ 3.272533] calling coreboot_bus_init+0x0/0x1000 [coreboot_table] @ 174
[ 3.272568] initcall coreboot_bus_init+0x0/0x1000 [coreboot_table] returned 0 after 24 usecs
[ 3.277004] calling coreboot_table_acpi_init+0x0/0x1000 [coreboot_table_acpi] @ 174
[ 3.281548] probe of BOOT0000:00 returned 1 after 4501 usecs
[ 3.281592] initcall coreboot_table_acpi_init+0x0/0x1000 [coreboot_table_acpi] returned 0 after 4466 usecs
[ 3.394856] calling init_soundcore+0x0/0x1000 [soundcore] @ 163
[ 3.394881] initcall init_soundcore+0x0/0x1000 [soundcore] returned 0 after 16 usecs
[ 3.398931] calling alsa_sound_init+0x0/0x82 [snd] @ 163
[ 3.398969] initcall alsa_sound_init+0x0/0x82 [snd] returned 0 after 23 usecs
[ 3.408131] calling alsa_timer_init+0x0/0x1000 [snd_timer] @ 163
[ 3.408258] initcall alsa_timer_init+0x0/0x1000 [snd_timer] returned 0 after 113 usecs
[ 3.445605] calling alsa_pcm_init+0x0/0x1000 [snd_pcm] @ 163
[ 3.445629] initcall alsa_pcm_init+0x0/0x1000 [snd_pcm] returned 0 after 10 usecs
[ 3.460686] calling ehci_hcd_init+0x0/0x1000 [ehci_hcd] @ 154
[ 3.460691] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.460719] initcall ehci_hcd_init+0x0/0x1000 [ehci_hcd] returned 0 after 21 usecs
[ 3.461441] calling hda_bus_init+0x0/0x14 [snd_hda_core] @ 163
[ 3.461479] initcall hda_bus_init+0x0/0x14 [snd_hda_core] returned 0 after 23 usecs
[ 3.462293] calling ehci_pci_init+0x0/0x1000 [ehci_pci] @ 154
[ 3.462297] ehci-pci: EHCI PCI platform driver
[ 3.462850] QUIRK: Enable AMD PLL fix
[ 3.462988] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 3.463004] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 3.463017] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 3.463101] ehci-pci 0000:00:12.2: debug port 1
[ 3.463197] ehci-pci 0000:00:12.2: irq 17, io mem 0xf014c000
[ 3.466097] calling ohci_hcd_mod_init+0x0/0x1000 [ohci_hcd] @ 153
[ 3.466102] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.466126] initcall ohci_hcd_mod_init+0x0/0x1000 [ohci_hcd] returned 0 after 19 usecs
[ 3.470325] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 3.470496] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 3.470500] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.470503] usb usb1: Product: EHCI Host Controller
[ 3.470506] usb usb1: Manufacturer: Linux 4.19.0-rc5-00001-g59d53fa4dfcf ehci_hcd
[ 3.470509] usb usb1: SerialNumber: 0000:00:12.2
[ 3.471285] hub 1-0:1.0: USB hub found
[ 3.471307] hub 1-0:1.0: 5 ports detected
[ 3.471866] probe of 1-0:1.0 returned 1 after 602 usecs
[ 3.471945] probe of usb1 returned 1 after 1206 usecs
[ 3.472033] probe of 0000:00:12.2 returned 1 after 9715 usecs
[ 3.473179] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 3.473209] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 3.473222] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 3.473306] ehci-pci 0000:00:13.2: debug port 1
[ 3.473364] ehci-pci 0000:00:13.2: irq 17, io mem 0xf014d000
[ 3.475076] calling piix4_driver_init+0x0/0x1000 [i2c_piix4] @ 174
[ 3.475155] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 3.475165] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection
[ 3.475957] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0x8060
[ 3.476479] probe of 0000:00:14.0 returned 1 after 1372 usecs
[ 3.476544] initcall piix4_driver_init+0x0/0x1000 [i2c_piix4] returned 0 after 1419 usecs
[ 3.480957] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 3.481144] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 3.481148] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.481151] usb usb2: Product: EHCI Host Controller
[ 3.481154] usb usb2: Manufacturer: Linux 4.19.0-rc5-00001-g59d53fa4dfcf ehci_hcd
[ 3.481157] usb usb2: SerialNumber: 0000:00:13.2
[ 3.481520] hub 2-0:1.0: USB hub found
[ 3.481540] hub 2-0:1.0: 5 ports detected
[ 3.481929] probe of 2-0:1.0 returned 1 after 425 usecs
[ 3.481991] probe of usb2 returned 1 after 593 usecs
[ 3.482075] probe of 0000:00:13.2 returned 1 after 10033 usecs
[ 3.482117] initcall ehci_pci_init+0x0/0x1000 [ehci_pci] returned 0 after 6862 usecs
[ 3.483892] calling ohci_pci_init+0x0/0x1000 [ohci_pci] @ 153
[ 3.483897] ohci-pci: OHCI PCI platform driver
[ 3.485213] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 3.485242] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 3.485379] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0148000
[ 3.485582] calling azx_driver_init+0x0/0xfe4 [snd_hda_intel] @ 163
[ 3.486890] probe of 0000:00:01.1 returned 1 after 1278 usecs
[ 3.487479] probe of 0000:00:14.2 returned 1 after 568 usecs
[ 3.487552] initcall azx_driver_init+0x0/0xfe4 [snd_hda_intel] returned 0 after 1907 usecs
[ 3.505499] calling hdmi_driver_init+0x0/0x1000 [snd_hda_codec_hdmi] @ 180
[ 3.510675] probe of hdaudioC0D0 returned 1 after 5151 usecs
[ 3.510738] initcall hdmi_driver_init+0x0/0x1000 [snd_hda_codec_hdmi] returned 0 after 5096 usecs
[ 3.511870] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input5
[ 3.517305] calling generic_driver_init+0x0/0x1000 [snd_hda_codec_generic] @ 181
[ 3.517362] initcall generic_driver_init+0x0/0x1000 [snd_hda_codec_generic] returned 0 after 43 usecs
[ 3.520448] calling realtek_driver_init+0x0/0x1000 [snd_hda_codec_realtek] @ 181
[ 3.522065] snd_hda_codec_realtek hdaudioC1D0: ALC892: SKU not ready 0x00000100
[ 3.522742] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line
[ 3.522772] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.522775] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 3.522778] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 3.522781] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0
[ 3.522783] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 3.522787] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 3.522790] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 3.522793] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 3.522796] snd_hda_codec_realtek hdaudioC1D0: CD=0x1c
[ 3.569218] calling k10temp_driver_init+0x0/0x1000 [k10temp] @ 155
[ 3.569404] probe of 0000:00:18.3 returned 1 after 148 usecs
[ 3.569441] initcall k10temp_driver_init+0x0/0x1000 [k10temp] returned 0 after 206 usecs
[ 3.573926] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 3.573934] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.573937] usb usb3: Product: OHCI PCI host controller
[ 3.573940] usb usb3: Manufacturer: Linux 4.19.0-rc5-00001-g59d53fa4dfcf ohci_hcd
[ 3.573943] usb usb3: SerialNumber: 0000:00:12.0
[ 3.582091] hub 3-0:1.0: USB hub found
[ 3.582330] hub 3-0:1.0: 5 ports detected
[ 3.586061] probe of 3-0:1.0 returned 1 after 3994 usecs
[ 3.587288] probe of usb3 returned 1 after 8272 usecs
[ 3.587479] probe of 0000:00:12.0 returned 1 after 103559 usecs
[ 3.591300] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 3.591331] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
[ 3.591402] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0149000
[ 3.592230] probe of hdaudioC1D0 returned 1 after 71754 usecs
[ 3.592302] initcall realtek_driver_init+0x0/0x1000 [snd_hda_codec_realtek] returned 0 after 22516 usecs
[ 3.593815] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input6
[ 3.593954] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
[ 3.594074] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
[ 3.595002] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
[ 3.596370] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[ 3.596604] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[ 3.596803] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[ 3.596943] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
[ 3.597913] calling rtl8169_pci_driver_init+0x0/0x1000 [r8169] @ 163
[ 3.626619] calling phy_module_init+0x0/0x1000 [realtek] @ 184
[ 3.627046] initcall phy_module_init+0x0/0x1000 [realtek] returned 0 after 406 usecs
[ 3.628981] probe of r8169-300:00 returned 1 after 41 usecs
[ 3.628996] libphy: r8169: probed
[ 3.632056] r8169 0000:03:00.0 eth0: RTL8168e/8111e, bc:5f:f4:c8:d3:98, XID 2c200000, IRQ 28
[ 3.632063] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 3.634522] probe of 0000:03:00.0 returned 1 after 36568 usecs
[ 3.634586] initcall rtl8169_pci_driver_init+0x0/0x1000 [r8169] returned 0 after 7760 usecs
[ 3.656144] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 3.656151] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.656155] usb usb4: Product: OHCI PCI host controller
[ 3.656159] usb usb4: Manufacturer: Linux 4.19.0-rc5-00001-g59d53fa4dfcf ohci_hcd
[ 3.656162] usb usb4: SerialNumber: 0000:00:13.0
[ 3.658764] hub 4-0:1.0: USB hub found
[ 3.658857] hub 4-0:1.0: 5 ports detected
[ 3.660657] probe of 4-0:1.0 returned 1 after 1926 usecs
[ 3.660788] probe of usb4 returned 1 after 2188 usecs
[ 3.660935] probe of 0000:00:13.0 returned 1 after 73445 usecs
[ 3.661484] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 3.661498] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5
[ 3.661559] ohci-pci 0000:00:14.5: irq 18, io mem 0xf014a000
[ 3.717060] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 3.717066] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.717069] usb usb5: Product: OHCI PCI host controller
[ 3.717072] usb usb5: Manufacturer: Linux 4.19.0-rc5-00001-g59d53fa4dfcf ohci_hcd
[ 3.717075] usb usb5: SerialNumber: 0000:00:14.5
[ 3.725784] hub 5-0:1.0: USB hub found
[ 3.725879] hub 5-0:1.0: 2 ports detected
[ 3.726023] probe of 5-0:1.0 returned 1 after 282 usecs
[ 3.726078] probe of usb5 returned 1 after 469 usecs
[ 3.726238] probe of 0000:00:14.5 returned 1 after 65293 usecs
[ 3.726279] initcall ohci_pci_init+0x0/0x1000 [ohci_pci] returned 0 after 97310 usecs
[ 3.941003] usb 3-2: new low-speed USB device number 2 using ohci-pci
[ 4.107966] usb 3-2: New USB device found, idVendor=1241, idProduct=1122, bcdDevice= 1.00
[ 4.107973] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.117568] input: HID 1241:1122 as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:1241:1122.0001/input/input14
[ 4.118137] hid-generic 0003:1241:1122.0001: input,hidraw0: USB HID v1.00 Mouse [HID 1241:1122] on usb-0000:00:12.0-2/input0
[ 4.118163] probe of 0003:1241:1122.0001 returned 1 after 932 usecs
[ 4.118190] probe of 3-2:1.0 returned 1 after 8101 usecs
[ 4.118242] probe of 3-2 returned 1 after 10059 usecs
[ 4.137572] r8169 0000:03:00.0 enp3s0: renamed from eth0
[ 4.237224] r8169 0000:03:00.0: Direct firmware load for rtl_nic/rtl8168e-2.fw failed with error -2
[ 4.237236] r8169 0000:03:00.0 enp3s0: unable to load firmware patch rtl_nic/rtl8168e-2.fw (-2)
[ 4.237714] RTL8211DN Gigabit Ethernet r8169-300:00: attached PHY driver [RTL8211DN Gigabit Ethernet] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
[ 4.339992] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 5.455340] random: crng init done
[ 5.455349] random: 7 urandom warning(s) missed due to ratelimiting
[ 6.778047] r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 6.778071] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: x86/mm: Found insecure W+X mapping at address (ptrval)/0xc00a0000
2018-09-24 21:47 ` Paul Menzel
@ 2018-09-28 14:55 ` Thomas Gleixner
2018-10-03 21:22 ` Borislav Petkov
0 siblings, 1 reply; 23+ messages in thread
From: Thomas Gleixner @ 2018-09-28 14:55 UTC (permalink / raw)
To: Paul Menzel; +Cc: linux-mm, x86
Paul,
On Mon, 24 Sep 2018, Paul Menzel wrote:
> Am 21.09.2018 um 00:51 schrieb Thomas Gleixner:
> > Can you please apply the patch below, and provide full dmesg of a seabios
> > and a grub boot along with the page table files for each?
>
> I applied the patch on top of 4.19-rc5. Please find all the files attached.
Sorry for the delay and thanks for the data. A quick diff did not reveal
anything obvious. I'll have a closer look and we probably need more (other)
information to nail that down.
Thanks,
tglx
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: x86/mm: Found insecure W+X mapping at address (ptrval)/0xc00a0000
2018-09-28 14:55 ` Thomas Gleixner
@ 2018-10-03 21:22 ` Borislav Petkov
2018-10-04 3:11 ` Paul Menzel
2018-10-04 8:03 ` Joerg Roedel
0 siblings, 2 replies; 23+ messages in thread
From: Borislav Petkov @ 2018-10-03 21:22 UTC (permalink / raw)
To: Thomas Gleixner; +Cc: Paul Menzel, linux-mm, x86, lkml
On Fri, Sep 28, 2018 at 04:55:19PM +0200, Thomas Gleixner wrote:
> Sorry for the delay and thanks for the data. A quick diff did not reveal
> anything obvious. I'll have a closer look and we probably need more (other)
> information to nail that down.
Just a brain dump of what I've found out so far.
Commenting out the init_mem_mapping() call below:
void __init init_mem_mapping(void)
{
unsigned long end;
...
/* the ISA range is always mapped regardless of memory holes */
// init_memory_mapping(0, ISA_END_ADDRESS);
changes the address the warning reports to:
[ 4.392870] x86/mm: Found insecure W+X mapping at address 0xc0000000/0xc0000000
but the machine boots fine otherwise.
Which begs the question: why do we direct-map the ISA range at
PAGE_OFFSET at all? Do we have to have virtual mappings of it at all? I
thought ISA devices don't need that but this is long before my time...
Then, the warning say too:
[ 4.399804] x86/mm: Checked W+X mappings: FAILED, 252 W+X pages found.
and there really are 252 pages (I counted) which are W+X:
---[ Kernel Mapping ]---
0xc0000000-0xc0001000 4K RW x pte
0xc0001000-0xc0099000 608K RW x pte
0xc0099000-0xc009a000 4K ro NX pte
0xc009a000-0xc009b000 4K ro x pte
0xc009b000-0xc009d000 8K RW NX pte
0xc009d000-0xc00a0000 12K RW x pte
0xc00a0000-0xc00a2000 8K RW x pte
0xc00a2000-0xc00b8000 88K RW x pte
0xc00b8000-0xc00c0000 32K RW x pte
0xc00c0000-0xc00f3000 204K RW x pte
0xc00f3000-0xc00fc000 36K RW x pte
0xc00fc000-0xc00fd000 4K RW x pte
0xc00fd000-0xc0100000 12K RW x pte
...
but I can't find where those guys appear from. Will be adding more debug
printks to track it down.
Anyway, just a dump of the current state...
Thx.
--
Regards/Gruss,
Boris.
Good mailing practices for 400: avoid top-posting and trim the reply.
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: x86/mm: Found insecure W+X mapping at address (ptrval)/0xc00a0000
2018-10-03 21:22 ` Borislav Petkov
@ 2018-10-04 3:11 ` Paul Menzel
2018-10-04 7:48 ` Borislav Petkov
2018-10-04 8:03 ` Joerg Roedel
1 sibling, 1 reply; 23+ messages in thread
From: Paul Menzel @ 2018-10-04 3:11 UTC (permalink / raw)
To: Borislav Petkov, Thomas Gleixner; +Cc: linux-mm, x86, lkml
Dear Borislav,
Am 03.10.2018 um 23:22 schrieb Borislav Petkov:
> On Fri, Sep 28, 2018 at 04:55:19PM +0200, Thomas Gleixner wrote:
>> Sorry for the delay and thanks for the data. A quick diff did not reveal
>> anything obvious. I'll have a closer look and we probably need more (other)
>> information to nail that down.
>
> Just a brain dump of what I've found out so far.
Thank you for looking into this. On what board are you able to reproduce
this? Do you build for 32-bit or 64-bit?
Kind regards,
Paul
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: x86/mm: Found insecure W+X mapping at address (ptrval)/0xc00a0000
2018-10-04 3:11 ` Paul Menzel
@ 2018-10-04 7:48 ` Borislav Petkov
0 siblings, 0 replies; 23+ messages in thread
From: Borislav Petkov @ 2018-10-04 7:48 UTC (permalink / raw)
To: Paul Menzel; +Cc: Thomas Gleixner, linux-mm, x86, lkml
On Thu, Oct 04, 2018 at 05:11:17AM +0200, Paul Menzel wrote:
> Thank you for looking into this. On what board are you able to reproduce
> this? Do you build for 32-bit or 64-bit?
32-bit partition on an AMD F14h laptop.
--
Regards/Gruss,
Boris.
Good mailing practices for 400: avoid top-posting and trim the reply.
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: x86/mm: Found insecure W+X mapping at address (ptrval)/0xc00a0000
2018-10-03 21:22 ` Borislav Petkov
2018-10-04 3:11 ` Paul Menzel
@ 2018-10-04 8:03 ` Joerg Roedel
2018-10-04 8:14 ` Borislav Petkov
2018-10-05 9:27 ` Thomas Gleixner
1 sibling, 2 replies; 23+ messages in thread
From: Joerg Roedel @ 2018-10-04 8:03 UTC (permalink / raw)
To: Borislav Petkov; +Cc: Thomas Gleixner, Paul Menzel, linux-mm, x86, lkml
On Wed, Oct 03, 2018 at 11:22:55PM +0200, Borislav Petkov wrote:
> On Fri, Sep 28, 2018 at 04:55:19PM +0200, Thomas Gleixner wrote:
> > Sorry for the delay and thanks for the data. A quick diff did not reveal
> > anything obvious. I'll have a closer look and we probably need more (other)
> > information to nail that down.
I also triggered this when working in the PTI-x32 code. It always
happens on a 32-bit PAE kernel for me.
Tracking it down I ended up in (iirc) arch/x86/mm/pageattr.c
function static_protections():
/*
* The BIOS area between 640k and 1Mb needs to be executable for
* PCI BIOS based config access (CONFIG_PCI_GOBIOS) support.
*/
#ifdef CONFIG_PCI_BIOS
if (pcibios_enabled && within(pfn, BIOS_BEGIN >> PAGE_SHIFT, BIOS_END >> PAGE_SHIFT))
pgprot_val(forbidden) |= _PAGE_NX;
#endif
I think that is the reason we are seeing this in that configuration.
Regards,
Joerg
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: x86/mm: Found insecure W+X mapping at address (ptrval)/0xc00a0000
2018-10-04 8:03 ` Joerg Roedel
@ 2018-10-04 8:14 ` Borislav Petkov
2018-10-04 8:40 ` Paul Menzel
2018-10-04 8:43 ` Joerg Roedel
2018-10-05 9:27 ` Thomas Gleixner
1 sibling, 2 replies; 23+ messages in thread
From: Borislav Petkov @ 2018-10-04 8:14 UTC (permalink / raw)
To: Joerg Roedel; +Cc: Thomas Gleixner, Paul Menzel, linux-mm, x86, lkml
On Thu, Oct 04, 2018 at 10:03:21AM +0200, Joerg Roedel wrote:
> I also triggered this when working in the PTI-x32 code. It always
> happens on a 32-bit PAE kernel for me.
>
> Tracking it down I ended up in (iirc) arch/x86/mm/pageattr.c
> function static_protections():
>
> /*
> * The BIOS area between 640k and 1Mb needs to be executable for
> * PCI BIOS based config access (CONFIG_PCI_GOBIOS) support.
> */
> #ifdef CONFIG_PCI_BIOS
> if (pcibios_enabled && within(pfn, BIOS_BEGIN >> PAGE_SHIFT, BIOS_END >> PAGE_SHIFT))
> pgprot_val(forbidden) |= _PAGE_NX;
> #endif
>
> I think that is the reason we are seeing this in that configuration.
So looking at this, BIOS_BEGIN and BIOS_END is the same range as the ISA
range:
#define ISA_START_ADDRESS 0x000a0000
#define ISA_END_ADDRESS 0x00100000
#define BIOS_BEGIN 0x000a0000
#define BIOS_END 0x00100000
and I did try marking the ISA range RO in mark_rodata_ro() but the
machine wouldn't boot after. So I'm guessing BIOS needs to write there
some crap.
--
Regards/Gruss,
Boris.
Good mailing practices for 400: avoid top-posting and trim the reply.
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: x86/mm: Found insecure W+X mapping at address (ptrval)/0xc00a0000
2018-10-04 8:14 ` Borislav Petkov
@ 2018-10-04 8:40 ` Paul Menzel
2018-10-04 8:49 ` Borislav Petkov
2018-10-04 8:43 ` Joerg Roedel
1 sibling, 1 reply; 23+ messages in thread
From: Paul Menzel @ 2018-10-04 8:40 UTC (permalink / raw)
To: Borislav Petkov, Jörg Rödel
Cc: Thomas Gleixner, linux-mm, x86, lkml
[-- Attachment #1: Type: text/plain, Size: 1367 bytes --]
Dear Borislav,
On 10/04/18 10:14, Borislav Petkov wrote:
> On Thu, Oct 04, 2018 at 10:03:21AM +0200, Joerg Roedel wrote:
>> I also triggered this when working in the PTI-x32 code. It always
>> happens on a 32-bit PAE kernel for me.
>>
>> Tracking it down I ended up in (iirc) arch/x86/mm/pageattr.c
>> function static_protections():
>>
>> /*
>> * The BIOS area between 640k and 1Mb needs to be executable for
>> * PCI BIOS based config access (CONFIG_PCI_GOBIOS) support.
>> */
>> #ifdef CONFIG_PCI_BIOS
>> if (pcibios_enabled && within(pfn, BIOS_BEGIN >> PAGE_SHIFT, BIOS_END >> PAGE_SHIFT))
>> pgprot_val(forbidden) |= _PAGE_NX;
>> #endif
>>
>> I think that is the reason we are seeing this in that configuration.
>
> So looking at this, BIOS_BEGIN and BIOS_END is the same range as the ISA
> range:
>
> #define ISA_START_ADDRESS 0x000a0000
> #define ISA_END_ADDRESS 0x00100000
>
> #define BIOS_BEGIN 0x000a0000
> #define BIOS_END 0x00100000
>
> and I did try marking the ISA range RO in mark_rodata_ro() but the
> machine wouldn't boot after. So I'm guessing BIOS needs to write
> there some crap.
Do you have a commit, I could test. My board is supported by coreboot,
and maybe it boots, so I can check, if the warning is gone.
Kind regards,
Paul
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 5174 bytes --]
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: x86/mm: Found insecure W+X mapping at address (ptrval)/0xc00a0000
2018-10-04 8:14 ` Borislav Petkov
2018-10-04 8:40 ` Paul Menzel
@ 2018-10-04 8:43 ` Joerg Roedel
2018-10-04 8:48 ` Borislav Petkov
1 sibling, 1 reply; 23+ messages in thread
From: Joerg Roedel @ 2018-10-04 8:43 UTC (permalink / raw)
To: Borislav Petkov; +Cc: Thomas Gleixner, Paul Menzel, linux-mm, x86, lkml
On Thu, Oct 04, 2018 at 10:14:38AM +0200, Borislav Petkov wrote:
> So looking at this, BIOS_BEGIN and BIOS_END is the same range as the ISA
> range:
>
> #define ISA_START_ADDRESS 0x000a0000
> #define ISA_END_ADDRESS 0x00100000
>
> #define BIOS_BEGIN 0x000a0000
> #define BIOS_END 0x00100000
>
>
> and I did try marking the ISA range RO in mark_rodata_ro() but the
> machine wouldn't boot after. So I'm guessing BIOS needs to write there
> some crap.
Yeah, that's what I also found out back then, the region needs to be WX.
So we can either leave with the warning, as we know it is harmless and
where it comes from or implement an exception in the checking code for
that region.
Regards,
Joerg
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: x86/mm: Found insecure W+X mapping at address (ptrval)/0xc00a0000
2018-10-04 8:43 ` Joerg Roedel
@ 2018-10-04 8:48 ` Borislav Petkov
0 siblings, 0 replies; 23+ messages in thread
From: Borislav Petkov @ 2018-10-04 8:48 UTC (permalink / raw)
To: Joerg Roedel; +Cc: Thomas Gleixner, Paul Menzel, linux-mm, x86, lkml
On Thu, Oct 04, 2018 at 10:43:18AM +0200, Joerg Roedel wrote:
> Yeah, that's what I also found out back then, the region needs to be WX.
> So we can either leave with the warning, as we know it is harmless and
> where it comes from or implement an exception in the checking code for
> that region.
The second thing is what I'm thinking too.
Or, a 3rd: not direct-map that first range at all. Commenting out the
ISA range mapping didn't have any adverse effects on my system here, for
example. But then those other mappings appeared:
https://lkml.kernel.org/r/20181003212255.GB28361@zn.tnic
for which I have no explanation yet how they came about.
This needs to be understood fully before we do anything. But it is
32-bit so it gets preempted by more important things all the time :)
--
Regards/Gruss,
Boris.
Good mailing practices for 400: avoid top-posting and trim the reply.
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: x86/mm: Found insecure W+X mapping at address (ptrval)/0xc00a0000
2018-10-04 8:40 ` Paul Menzel
@ 2018-10-04 8:49 ` Borislav Petkov
2018-10-04 8:59 ` Paul Menzel
0 siblings, 1 reply; 23+ messages in thread
From: Borislav Petkov @ 2018-10-04 8:49 UTC (permalink / raw)
To: Paul Menzel; +Cc: Jörg Rödel, Thomas Gleixner, linux-mm, x86, lkml
On Thu, Oct 04, 2018 at 10:40:49AM +0200, Paul Menzel wrote:
> Do you have a commit, I could test.
Not yet but I have a question for you: why are you running 32-bit and
haven't moved to 64-bit already?
--
Regards/Gruss,
Boris.
Good mailing practices for 400: avoid top-posting and trim the reply.
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: x86/mm: Found insecure W+X mapping at address (ptrval)/0xc00a0000
2018-10-04 8:49 ` Borislav Petkov
@ 2018-10-04 8:59 ` Paul Menzel
2018-10-04 10:54 ` Borislav Petkov
0 siblings, 1 reply; 23+ messages in thread
From: Paul Menzel @ 2018-10-04 8:59 UTC (permalink / raw)
To: Borislav Petkov
Cc: Jörg Rödel, Thomas Gleixner, linux-mm, x86, lkml
[-- Attachment #1: Type: text/plain, Size: 426 bytes --]
Dear Borislav,
On 10/04/18 10:49, Borislav Petkov wrote:
> On Thu, Oct 04, 2018 at 10:40:49AM +0200, Paul Menzel wrote:
>> Do you have a commit, I could test.
>
> Not yet
I meant just the test you did.
> but I have a question for you: why are you running 32-bit and
> haven't moved to 64-bit already?
The SSD is also used in the Lenovo X60 and T60, which are
32-bit systems.
Kind regards,
Paul
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 5174 bytes --]
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: x86/mm: Found insecure W+X mapping at address (ptrval)/0xc00a0000
2018-10-04 8:59 ` Paul Menzel
@ 2018-10-04 10:54 ` Borislav Petkov
2018-10-04 11:00 ` Paul Menzel
0 siblings, 1 reply; 23+ messages in thread
From: Borislav Petkov @ 2018-10-04 10:54 UTC (permalink / raw)
To: Paul Menzel; +Cc: Jörg Rödel, Thomas Gleixner, linux-mm, x86, lkml
On Thu, Oct 04, 2018 at 10:59:18AM +0200, Paul Menzel wrote:
> I meant just the test you did.
https://lkml.kernel.org/r/20181003212255.GB28361@zn.tnic
> The SSD is also used in the Lenovo X60 and T60, which are
> 32-bit systems.
And what exactly is the problem when you access it on a 64-bit OS?
--
Regards/Gruss,
Boris.
Good mailing practices for 400: avoid top-posting and trim the reply.
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: x86/mm: Found insecure W+X mapping at address (ptrval)/0xc00a0000
2018-10-04 10:54 ` Borislav Petkov
@ 2018-10-04 11:00 ` Paul Menzel
2018-10-04 11:12 ` Borislav Petkov
0 siblings, 1 reply; 23+ messages in thread
From: Paul Menzel @ 2018-10-04 11:00 UTC (permalink / raw)
To: Borislav Petkov
Cc: Jörg Rödel, Thomas Gleixner, linux-mm, x86, LKML
[-- Attachment #1: Type: text/plain, Size: 793 bytes --]
Dear Borislav,
On 10/04/18 12:54, Borislav Petkov wrote:
> On Thu, Oct 04, 2018 at 10:59:18AM +0200, Paul Menzel wrote:
>> I meant just the test you did.
>
> https://lkml.kernel.org/r/20181003212255.GB28361@zn.tnic
I see. But there you write, the machine does boot.
While here you write, it did not.
> and I did try marking the ISA range RO in mark_rodata_ro() but the
> machine wouldn't boot after.
>> The SSD is also used in the Lenovo X60 and T60, which are
>> 32-bit systems.
>
> And what exactly is the problem when you access it on a 64-bit OS?
Sorry I do not understand the question. I carry the SSD drive with
me, and connect it to the ASRock E350M1 (64-bit) or to the Lenovo
X60 laptop and boot from it from both systems.
Kind regards,
Paul
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 5174 bytes --]
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: x86/mm: Found insecure W+X mapping at address (ptrval)/0xc00a0000
2018-10-04 11:00 ` Paul Menzel
@ 2018-10-04 11:12 ` Borislav Petkov
0 siblings, 0 replies; 23+ messages in thread
From: Borislav Petkov @ 2018-10-04 11:12 UTC (permalink / raw)
To: Paul Menzel; +Cc: Jörg Rödel, Thomas Gleixner, linux-mm, x86, LKML
On Thu, Oct 04, 2018 at 01:00:42PM +0200, Paul Menzel wrote:
> While here you write, it did not.
Read again what I said:
> and I did try marking the ISA range RO in mark_rodata_ro() but the
> machine wouldn't boot after.
and the code I pasted has this:
// init_memory_mapping(0, ISA_END_ADDRESS);
which is disabling the direct mapping of the ISA range.
Two very different things.
And you don't absolutely need to try it because it would simply move the
warning to another address, just like it happened on my system. Because
looking at your dmesg, that E350M1 machine is very similar to the laptop
I have. But feel free if you have time on your hands... :)
> Sorry I do not understand the question. I carry the SSD drive with
> me, and connect it to the ASRock E350M1 (64-bit) or to the Lenovo
> X60 laptop and boot from it from both systems.
So it is an OS installation which you swap between two machines. I
admit, it is the first time I hear of such a use case. In that case,
yes, bitness does matter.
--
Regards/Gruss,
Boris.
Good mailing practices for 400: avoid top-posting and trim the reply.
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: x86/mm: Found insecure W+X mapping at address (ptrval)/0xc00a0000
2018-10-04 8:03 ` Joerg Roedel
2018-10-04 8:14 ` Borislav Petkov
@ 2018-10-05 9:27 ` Thomas Gleixner
2018-10-05 9:39 ` Paul Menzel
1 sibling, 1 reply; 23+ messages in thread
From: Thomas Gleixner @ 2018-10-05 9:27 UTC (permalink / raw)
To: Joerg Roedel; +Cc: Borislav Petkov, Paul Menzel, linux-mm, x86, lkml
On Thu, 4 Oct 2018, Joerg Roedel wrote:
> On Wed, Oct 03, 2018 at 11:22:55PM +0200, Borislav Petkov wrote:
> > On Fri, Sep 28, 2018 at 04:55:19PM +0200, Thomas Gleixner wrote:
> > > Sorry for the delay and thanks for the data. A quick diff did not reveal
> > > anything obvious. I'll have a closer look and we probably need more (other)
> > > information to nail that down.
>
> I also triggered this when working in the PTI-x32 code. It always
> happens on a 32-bit PAE kernel for me.
>
> Tracking it down I ended up in (iirc) arch/x86/mm/pageattr.c
> function static_protections():
>
> /*
> * The BIOS area between 640k and 1Mb needs to be executable for
> * PCI BIOS based config access (CONFIG_PCI_GOBIOS) support.
> */
> #ifdef CONFIG_PCI_BIOS
> if (pcibios_enabled && within(pfn, BIOS_BEGIN >> PAGE_SHIFT, BIOS_END >> PAGE_SHIFT))
> pgprot_val(forbidden) |= _PAGE_NX;
> #endif
>
> I think that is the reason we are seeing this in that configuration.
Uurgh. Yes.
If pcibios is enabled and used, need to look at the gory details of that
first, then the W+X check has to exclude that region. We can't do much
about that.
Thanks,
tglx
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: x86/mm: Found insecure W+X mapping at address (ptrval)/0xc00a0000
2018-10-05 9:27 ` Thomas Gleixner
@ 2018-10-05 9:39 ` Paul Menzel
2018-10-08 19:37 ` Thomas Gleixner
0 siblings, 1 reply; 23+ messages in thread
From: Paul Menzel @ 2018-10-05 9:39 UTC (permalink / raw)
To: Thomas Gleixner, Jörg Rödel
Cc: Borislav Petkov, linux-mm, x86, lkml
[-- Attachment #1: Type: text/plain, Size: 2595 bytes --]
Dear Thomas,
On 10/05/18 11:27, Thomas Gleixner wrote:
> On Thu, 4 Oct 2018, Joerg Roedel wrote:
>
>> On Wed, Oct 03, 2018 at 11:22:55PM +0200, Borislav Petkov wrote:
>>> On Fri, Sep 28, 2018 at 04:55:19PM +0200, Thomas Gleixner wrote:
>>>> Sorry for the delay and thanks for the data. A quick diff did not reveal
>>>> anything obvious. I'll have a closer look and we probably need more (other)
>>>> information to nail that down.
>>
>> I also triggered this when working in the PTI-x32 code. It always
>> happens on a 32-bit PAE kernel for me.
>>
>> Tracking it down I ended up in (iirc) arch/x86/mm/pageattr.c
>> function static_protections():
>>
>> /*
>> * The BIOS area between 640k and 1Mb needs to be executable for
>> * PCI BIOS based config access (CONFIG_PCI_GOBIOS) support.
>> */
>> #ifdef CONFIG_PCI_BIOS
>> if (pcibios_enabled && within(pfn, BIOS_BEGIN >> PAGE_SHIFT, BIOS_END >> PAGE_SHIFT))
>> pgprot_val(forbidden) |= _PAGE_NX;
>> #endif
>>
>> I think that is the reason we are seeing this in that configuration.
>
> Uurgh. Yes.
>
> If pcibios is enabled and used, need to look at the gory details of that
> first, then the W+X check has to exclude that region. We can't do much
> about that.
That would also explain, why it only happens with the SeaBIOS payload,
which sets up legacy BIOS calls. Using GRUB directly as payload, no BIOS
calls are set up.
Reading the Kconfig description of the PCI access mode, the BIOS should
only be used last.
> choice
> prompt "PCI access mode"
> depends on X86_32 && PCI
> default PCI_GOANY
> ---help---
> On PCI systems, the BIOS can be used to detect the PCI devices and
> determine their configuration. However, some old PCI motherboards
> have BIOS bugs and may crash if this is done. Also, some embedded
> PCI-based systems don't have any BIOS at all. Linux can also try to
> detect the PCI hardware directly without using the BIOS.
>
> With this option, you can specify how Linux should detect the
> PCI devices. If you choose "BIOS", the BIOS will be used,
> if you choose "Direct", the BIOS won't be used, and if you
> choose "MMConfig", then PCI Express MMCONFIG will be used.
> If you choose "Any", the kernel will try MMCONFIG, then the
> direct access method and falls back to the BIOS if that doesn't
> work. If unsure, go with the default, which is "Any".
Kind regards,
Paul
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 5174 bytes --]
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: x86/mm: Found insecure W+X mapping at address (ptrval)/0xc00a0000
2018-10-05 9:39 ` Paul Menzel
@ 2018-10-08 19:37 ` Thomas Gleixner
2018-10-08 20:08 ` Bjorn Helgaas
0 siblings, 1 reply; 23+ messages in thread
From: Thomas Gleixner @ 2018-10-08 19:37 UTC (permalink / raw)
To: Paul Menzel
Cc: Jörg Rödel, Borislav Petkov, linux-mm, x86, lkml,
Bjorn Helgaas
Paul,
On Fri, 5 Oct 2018, Paul Menzel wrote:
> On 10/05/18 11:27, Thomas Gleixner wrote:
> > If pcibios is enabled and used, need to look at the gory details of that
> > first, then the W+X check has to exclude that region. We can't do much
> > about that.
>
> That would also explain, why it only happens with the SeaBIOS payload,
> which sets up legacy BIOS calls. Using GRUB directly as payload, no BIOS
> calls are set up.
>
> Reading the Kconfig description of the PCI access mode, the BIOS should
> only be used last.
Correct. And looking at the dmesg you provided it is initialized:
[ 0.441062] PCI: PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[ 0.441062] PCI: PCI BIOS revision 2.10 entry at 0xffa40, last bus=3
Though I assume it's not really required, but this PCI BIOS thing is not
really well documented and there are some obsure usage sites involved.
Bjorn, do you have any insight or did you flush those memories long ago?
Anyway we need to exclude the BIOS area when the kernel sets the W+X on
purpose. Warning about that is bogus. I'll send out a patch soon.
Thanks,
tglx
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: x86/mm: Found insecure W+X mapping at address (ptrval)/0xc00a0000
2018-10-08 19:37 ` Thomas Gleixner
@ 2018-10-08 20:08 ` Bjorn Helgaas
0 siblings, 0 replies; 23+ messages in thread
From: Bjorn Helgaas @ 2018-10-08 20:08 UTC (permalink / raw)
To: Thomas Gleixner
Cc: pmenzel, Joerg Roedel, Borislav Petkov, linux-mm, x86,
Linux Kernel Mailing List
On Mon, Oct 8, 2018 at 2:37 PM Thomas Gleixner <tglx@linutronix.de> wrote:
>
> Paul,
>
> On Fri, 5 Oct 2018, Paul Menzel wrote:
> > On 10/05/18 11:27, Thomas Gleixner wrote:
> > > If pcibios is enabled and used, need to look at the gory details of that
> > > first, then the W+X check has to exclude that region. We can't do much
> > > about that.
> >
> > That would also explain, why it only happens with the SeaBIOS payload,
> > which sets up legacy BIOS calls. Using GRUB directly as payload, no BIOS
> > calls are set up.
> >
> > Reading the Kconfig description of the PCI access mode, the BIOS should
> > only be used last.
>
> Correct. And looking at the dmesg you provided it is initialized:
>
> [ 0.441062] PCI: PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
> [ 0.441062] PCI: PCI BIOS revision 2.10 entry at 0xffa40, last bus=3
>
> Though I assume it's not really required, but this PCI BIOS thing is not
> really well documented and there are some obsure usage sites involved.
>
> Bjorn, do you have any insight or did you flush those memories long ago?
No, I don't. I was never really involved with PCIBIOS.
^ permalink raw reply [flat|nested] 23+ messages in thread
end of thread, other threads:[~2018-10-08 20:08 UTC | newest]
Thread overview: 23+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-09-19 6:55 x86/mm: Found insecure W+X mapping at address (ptrval)/0xc00a0000 Paul Menzel
2018-09-19 8:09 ` Thomas Gleixner
2018-09-20 7:07 ` Paul Menzel
2018-09-20 22:51 ` Thomas Gleixner
2018-09-24 21:47 ` Paul Menzel
2018-09-28 14:55 ` Thomas Gleixner
2018-10-03 21:22 ` Borislav Petkov
2018-10-04 3:11 ` Paul Menzel
2018-10-04 7:48 ` Borislav Petkov
2018-10-04 8:03 ` Joerg Roedel
2018-10-04 8:14 ` Borislav Petkov
2018-10-04 8:40 ` Paul Menzel
2018-10-04 8:49 ` Borislav Petkov
2018-10-04 8:59 ` Paul Menzel
2018-10-04 10:54 ` Borislav Petkov
2018-10-04 11:00 ` Paul Menzel
2018-10-04 11:12 ` Borislav Petkov
2018-10-04 8:43 ` Joerg Roedel
2018-10-04 8:48 ` Borislav Petkov
2018-10-05 9:27 ` Thomas Gleixner
2018-10-05 9:39 ` Paul Menzel
2018-10-08 19:37 ` Thomas Gleixner
2018-10-08 20:08 ` Bjorn Helgaas
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.